1
|
Venkatesalu S, Dilliyappan S, Satish Kumar A, Palaniyandi T, Baskar G, Ravi M, Sivaji A. Prospectives and retrospectives of microfluidics devices and lab-on-A-chip emphasis on cancer. Clin Chim Acta 2024; 552:117646. [PMID: 38000458 DOI: 10.1016/j.cca.2023.117646] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2023] [Revised: 11/06/2023] [Accepted: 11/08/2023] [Indexed: 11/26/2023]
Abstract
Microfluidics is a science and technology that deals with the concept of "less sample-to-more precision" enabling portable device development via fabrication for in vitro analysis. On evolution, microfluidic system lead to the development of Organ-on-chip where recapitulation of organ's functionality and pathophysiological response can be performed under controlled environment. Further microfluidic-based "Lab-on-chip" device, a versatile innovation credited for its number of parameters that has capability to leverage next-generation companion of medicines. This emulsion science has enormous practise in the field of regenerative medicine, drug screening, medical diagnosis and therapy for accuracy in results. In this era of personalized medicine, getting precise tools for applying these theranostics is crucial. Oncological theranostics create a new gateway to develop precision in personalized medicine for cancer, where microfluidic chips are involved in diagnosis and therapy of various cancers using biomarkers for thyroid, lung cancers, and assay based for breast, circulating tumor cells and colorectal cancers and nanoparticles for ovarian cancer. This review shows more comprehensive approach to the state of art with respect to microfluidic devices in cancer theranostics.
Collapse
Affiliation(s)
- Sneha Venkatesalu
- Department of Biotechnology, Dr. M.G.R. Educational and Research Institute, Chennai, India
| | | | - Avanthika Satish Kumar
- Department of Biotechnology, Dr. M.G.R. Educational and Research Institute, Chennai, India
| | - Thirunavukkarasu Palaniyandi
- Department of Biotechnology, Dr. M.G.R. Educational and Research Institute, Chennai, India; Department of Anatomy, Biomedical Research Unit and Laboratory Animal Centre, Saveetha Dental College and Hospital, SIMATS, Saveetha University, Chennai, India.
| | - Gomathy Baskar
- Department of Biotechnology, Dr. M.G.R. Educational and Research Institute, Chennai, India
| | - Maddaly Ravi
- Department of Human Genetics, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| | - Asha Sivaji
- Department of Biochemistry, DKM College for Women, Vellore, India
| |
Collapse
|
2
|
Ramesh M, Janani R, Deepa C, Rajeshkumar L. Nanotechnology-Enabled Biosensors: A Review of Fundamentals, Design Principles, Materials, and Applications. BIOSENSORS 2022; 13:bios13010040. [PMID: 36671875 PMCID: PMC9856107 DOI: 10.3390/bios13010040] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Revised: 12/22/2022] [Accepted: 12/23/2022] [Indexed: 05/14/2023]
Abstract
Biosensors are modern engineering tools that can be widely used for various technological applications. In the recent past, biosensors have been widely used in a broad application spectrum including industrial process control, the military, environmental monitoring, health care, microbiology, and food quality control. Biosensors are also used specifically for monitoring environmental pollution, detecting toxic elements' presence, the presence of bio-hazardous viruses or bacteria in organic matter, and biomolecule detection in clinical diagnostics. Moreover, deep medical applications such as well-being monitoring, chronic disease treatment, and in vitro medical examination studies such as the screening of infectious diseases for early detection. The scope for expanding the use of biosensors is very high owing to their inherent advantages such as ease of use, scalability, and simple manufacturing process. Biosensor technology is more prevalent as a large-scale, low cost, and enhanced technology in the modern medical field. Integration of nanotechnology with biosensors has shown the development path for the novel sensing mechanisms and biosensors as they enhance the performance and sensing ability of the currently used biosensors. Nanoscale dimensional integration promotes the formulation of biosensors with simple and rapid detection of molecules along with the detection of single biomolecules where they can also be evaluated and analyzed critically. Nanomaterials are used for the manufacturing of nano-biosensors and the nanomaterials commonly used include nanoparticles, nanowires, carbon nanotubes (CNTs), nanorods, and quantum dots (QDs). Nanomaterials possess various advantages such as color tunability, high detection sensitivity, a large surface area, high carrier capacity, high stability, and high thermal and electrical conductivity. The current review focuses on nanotechnology-enabled biosensors, their fundamentals, and architectural design. The review also expands the view on the materials used for fabricating biosensors and the probable applications of nanotechnology-enabled biosensors.
Collapse
Affiliation(s)
- Manickam Ramesh
- Department of Mechanical Engineering, KIT-Kalaignarkarunanidhi Institute of Technology, Coimbatore 641402, Tamil Nadu, India
- Correspondence:
| | - Ravichandran Janani
- Department of Physics, KIT-Kalaignarkarunanidhi Institute of Technology, Coimbatore 641402, Tamil Nadu, India
| | - Chinnaiyan Deepa
- Department of Artificial Intelligence & Data Science, KIT-Kalaignarkarunanidhi Institute of Technology, Coimbatore 641402, Tamil Nadu, India
| | - Lakshminarasimhan Rajeshkumar
- Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore 641407, Tamil Nadu, India
| |
Collapse
|
3
|
Akbari Kenari M, Rezvani Ghomi E, Akbari Kenari A, Arabi SMS, Deylami J, Ramakrishna S. Biomedical applications of microfluidic devices: Achievements and challenges. POLYM ADVAN TECHNOL 2022. [DOI: 10.1002/pat.5847] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Mahsa Akbari Kenari
- Department of Chemical Engineering Polytechnique Montreal Montreal Quebec Canada
| | - Erfan Rezvani Ghomi
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| | | | | | - Javad Deylami
- School of Physical and Mathematical Sciences Nanyang Technological University Singapore Singapore
| | - Seeram Ramakrishna
- Center for Nanotechnology and Sustainability, Department of Mechanical Engineering National University of Singapore Singapore Singapore
| |
Collapse
|
4
|
Toppo AL, Jujjavarapu SE. New insights for integration of nano particle with microfluidic systems for sensor applications. Biomed Microdevices 2022; 24:13. [PMID: 35171352 DOI: 10.1007/s10544-021-00598-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 10/10/2021] [Indexed: 11/29/2022]
Abstract
A biosensor is a compact device, which utilizes biological derived recognition component, immobilized on a transducer to analyze an analyte. Nanoparticles with their unique chemical and physical properties are versatile in their applications to develop as sensors. Different nanoparticles play different roles in the sensing systems like metal and metal oxide nanoparticles. The application of Gold, Silver and Copper nanoparticles will be discussed in brief. The nanoparticles typically function as substrates for immobilization of biomolecules, as catalytic agent, electron transfer agent between electrode surface and the biomolecules, and as reactants. Microfluidic deals with manipulating very small volumes of fluids (micro and nanoliters). This miniaturized platform enhances control of flow conditions and mixing rate of fluids. The microfluidics improves the sensitivity of the analysis, and reduces the volumes of sample and reagent in the analysis. The review specifically aims at representing microfluidics-based sensors and nanoparticle based sensors. This review will also focus on probable merger of these two fields to take advantage of both the fields and this will help in pushing the boundaries of these fields further more.
Collapse
Affiliation(s)
- A L Toppo
- Deparment of Biotechnology, National Institute of Technology Raipur, Raipur, India
| | - S E Jujjavarapu
- Deparment of Biotechnology, National Institute of Technology Raipur, Raipur, India.
| |
Collapse
|
5
|
Sethakorn N, Heninger E, Sánchez-de-Diego C, Ding AB, Yada RC, Kerr SC, Kosoff D, Beebe DJ, Lang JM. Advancing Treatment of Bone Metastases through Novel Translational Approaches Targeting the Bone Microenvironment. Cancers (Basel) 2022; 14:757. [PMID: 35159026 PMCID: PMC8833657 DOI: 10.3390/cancers14030757] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2021] [Revised: 01/21/2022] [Accepted: 01/29/2022] [Indexed: 02/04/2023] Open
Abstract
Bone metastases represent a lethal condition that frequently occurs in solid tumors such as prostate, breast, lung, and renal cell carcinomas, and increase the risk of skeletal-related events (SREs) including pain, pathologic fractures, and spinal cord compression. This unique metastatic niche consists of a multicellular complex that cancer cells co-opt to engender bone remodeling, immune suppression, and stromal-mediated therapeutic resistance. This review comprehensively discusses clinical challenges of bone metastases, novel preclinical models of the bone and bone marrow microenviroment, and crucial signaling pathways active in bone homeostasis and metastatic niche. These studies establish the context to summarize the current state of investigational agents targeting BM, and approaches to improve BM-targeting therapies. Finally, we discuss opportunities to advance research in bone and bone marrow microenvironments by increasing complexity of humanized preclinical models and fostering interdisciplinary collaborations to translational research in this challenging metastatic niche.
Collapse
Affiliation(s)
- Nan Sethakorn
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Division of Hematology/Oncology, University of Wisconsin-Madison, 1111 Highland Ave., Madison, WI 53705, USA
- Department of Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA
| | - Erika Heninger
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
| | - Cristina Sánchez-de-Diego
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Department of Pathology and Laboratory Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA;
| | - Adeline B. Ding
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
| | - Ravi Chandra Yada
- Department of Pathology and Laboratory Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA;
| | - Sheena C. Kerr
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Department of Pathology and Laboratory Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA;
| | - David Kosoff
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Division of Hematology/Oncology, University of Wisconsin-Madison, 1111 Highland Ave., Madison, WI 53705, USA
- Department of Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA
| | - David J. Beebe
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Department of Pathology and Laboratory Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA;
- Department of Biomedical Engineering, University of Wisconsin-Madison, Madison, WI 53705, USA
| | - Joshua M. Lang
- University of Wisconsin Carbone Cancer Center, University of Wisconsin-Madison, Madison, WI 53705, USA; (N.S.); (E.H.); (C.S.-d.-D.); (A.B.D.); (S.C.K.); (D.K.); (D.J.B.)
- Division of Hematology/Oncology, University of Wisconsin-Madison, 1111 Highland Ave., Madison, WI 53705, USA
- Department of Medicine, University of Wisconsin-Madison, Madison, WI 53705, USA
- Wisconsin Institutes for Medical Research, 1111 Highland Ave., Madison, WI 53705, USA
| |
Collapse
|
6
|
Zheng J, Cole T, Zhang Y, Kim J, Tang SY. Exploiting machine learning for bestowing intelligence to microfluidics. Biosens Bioelectron 2021; 194:113666. [PMID: 34600338 DOI: 10.1016/j.bios.2021.113666] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2021] [Revised: 09/18/2021] [Accepted: 09/21/2021] [Indexed: 02/06/2023]
Abstract
Intelligent microfluidics is an emerging cross-discipline research area formed by combining microfluidics with machine learning. It uses the advantages of microfluidics, such as high throughput and controllability, and the powerful data processing capabilities of machine learning, resulting in improved systems in biotechnology and chemistry. Compared to traditional microfluidics using manual analysis methods, intelligent microfluidics needs less human intervention, and results in a more user-friendly experience with faster processing. There is a paucity of literature reviewing this burgeoning and highly promising cross-discipline. Therefore, we herein comprehensively and systematically summarize several aspects of microfluidic applications enabled by machine learning. We list the types of microfluidics used in intelligent microfluidic applications over the last five years, as well as the machine learning algorithms and the hardware used for training. We also present the most recent advances in key technologies, developments, challenges, and the emerging opportunities created by intelligent microfluidics.
Collapse
Affiliation(s)
- Jiahao Zheng
- Department of Electronic, Electrical and Systems Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK
| | - Tim Cole
- Department of Electronic, Electrical and Systems Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK
| | - Yuxin Zhang
- Department of Electronic, Electrical and Systems Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK
| | - Jeeson Kim
- Department of Intelligent Mechatronics Engineering, Sejong University, Seoul, 05006, South Korea.
| | - Shi-Yang Tang
- Department of Electronic, Electrical and Systems Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
| |
Collapse
|
7
|
Aladese AD, Jeong HH. Recent Developments in 3D Printing of Droplet-Based Microfluidics. BIOCHIP JOURNAL 2021. [DOI: 10.1007/s13206-021-00032-1] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
8
|
Mansoorifar A, Gordon R, Bergan R, Bertassoni LE. Bone-on-a-chip: microfluidic technologies and microphysiologic models of bone tissue. ADVANCED FUNCTIONAL MATERIALS 2021; 31:2006796. [PMID: 35422682 PMCID: PMC9007546 DOI: 10.1002/adfm.202006796] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2020] [Indexed: 05/07/2023]
Abstract
Bone is an active organ that continuously undergoes an orchestrated process of remodeling throughout life. Bone tissue is uniquely capable of adapting to loading, hormonal, and other changes happening in the body, as well as repairing bone that becomes damaged to maintain tissue integrity. On the other hand, diseases such as osteoporosis and metastatic cancers disrupt normal bone homeostasis leading to compromised function. Historically, our ability to investigate processes related to either physiologic or diseased bone tissue has been limited by traditional models that fail to emulate the complexity of native bone. Organ-on-a-chip models are based on technological advances in tissue engineering and microfluidics, enabling the reproduction of key features specific to tissue microenvironments within a microfabricated device. Compared to conventional in-vitro and in-vivo bone models, microfluidic models, and especially organs-on-a-chip platforms, provide more biomimetic tissue culture conditions, with increased predictive power for clinical assays. In this review, we will report microfluidic and organ-on-a-chip technologies designed for understanding the biology of bone as well as bone-related diseases and treatments. Finally, we discuss the limitations of the current models and point toward future directions for microfluidics and organ-on-a-chip technologies in bone research.
Collapse
Affiliation(s)
- Amin Mansoorifar
- Department of Restorative Dentistry, School of Dentistry, Oregon Health & Science University, Portland, OR, USA
| | - Ryan Gordon
- Division of Hematology/Oncology, Knight Cancer Institute, Oregon Health & Science University, Portland, OR, USA
| | - Raymond Bergan
- Division of Hematology/Oncology, Knight Cancer Institute, Oregon Health & Science University, Portland, OR, USA
| | - Luiz E. Bertassoni
- Department of Restorative Dentistry, School of Dentistry, Oregon Health & Science University, Portland, OR, USA
- Center for Regenerative Medicine, School of Medicine, Oregon Health & Science University, Portland, OR, USA
- Department of Biomedical Engineering, School of Medicine, Oregon Health & Science University, Portland, OR, USA
- Cancer Early Detection Advanced Research Center (CEDAR), Knight Cancer Institute, Portland, OR, USA
| |
Collapse
|
9
|
Microfluidic and Microscale Assays to Examine Regenerative Strategies in the Neuro Retina. MICROMACHINES 2020; 11:mi11121089. [PMID: 33316971 PMCID: PMC7763644 DOI: 10.3390/mi11121089] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/06/2020] [Revised: 12/03/2020] [Accepted: 12/05/2020] [Indexed: 12/15/2022]
Abstract
Bioengineering systems have transformed scientific knowledge of cellular behaviors in the nervous system (NS) and pioneered innovative, regenerative therapies to treat adult neural disorders. Microscale systems with characteristic lengths of single to hundreds of microns have examined the development and specialized behaviors of numerous neuromuscular and neurosensory components of the NS. The visual system is comprised of the eye sensory organ and its connecting pathways to the visual cortex. Significant vision loss arises from dysfunction in the retina, the photosensitive tissue at the eye posterior that achieves phototransduction of light to form images in the brain. Retinal regenerative medicine has embraced microfluidic technologies to manipulate stem-like cells for transplantation therapies, where de/differentiated cells are introduced within adult tissue to replace dysfunctional or damaged neurons. Microfluidic systems coupled with stem cell biology and biomaterials have produced exciting advances to restore vision. The current article reviews contemporary microfluidic technologies and microfluidics-enhanced bioassays, developed to interrogate cellular responses to adult retinal cues. The focus is on applications of microfluidics and microscale assays within mammalian sensory retina, or neuro retina, comprised of five types of retinal neurons (photoreceptors, horizontal, bipolar, amacrine, retinal ganglion) and one neuroglia (Müller), but excludes the non-sensory, retinal pigmented epithelium.
Collapse
|
10
|
Abstract
Since the discovery of graphene, there has been increasing interest in two-dimensional (2D) materials. To realize practical applications of 2D materials, it is essential to isolate mono- or few-layered 2D nanosheets from unexfoliated counterparts. Liquid phase exfoliation (LPE) is the most common technique to produce atomically thin-layered 2D nanosheets. However, low production yield and prolonged process time remain key challenges. Recently, novel exfoliation processes based on microfluidics have been developed to achieve rapid and high yield production of few-layer 2D nanosheets. We review the primary types of microfluidic-based exfoliation techniques in terms of the underlying process mechanisms and the applications of the 2D nanosheets thus produced. The key challenges and future directions are discussed in the above context to delineate future research directions in this exciting area of materials processing.
Collapse
|
11
|
Klein AK, Dietzel A. A Primer on Microfluidics: From Basic Principles to Microfabrication. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2020; 179:17-35. [PMID: 33404675 DOI: 10.1007/10_2020_156] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Microfluidic systems enable manipulating fluids in different functional units which are integrated on a microchip. This chapter describes the basics of microfluidics, where physical effects have a different impact compared to macroscopic systems. Furthermore, an overwiew is given on the microfabrication of these systems. The focus lies on clean-room fabrication methods based on photolithography and soft lithography. Finally, an outlook on advanced maskless micro- and nanofabrication methods is given. Special attention is paid to laser structuring processes.
Collapse
Affiliation(s)
- Ann-Kathrin Klein
- Institute of Microtechnology Technische Universität Braunschweig, Braunschweig, Germany
| | - Andreas Dietzel
- Institute of Microtechnology Technische Universität Braunschweig, Braunschweig, Germany.
| |
Collapse
|
12
|
Kotz F, Helmer D, Rapp BE. Emerging Technologies and Materials for High-Resolution 3D Printing of Microfluidic Chips. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2020; 179:37-66. [PMID: 32797271 DOI: 10.1007/10_2020_141] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
In recent years, 3D printing has had a huge impact on the field of biotechnology: from 3D-printed pharmaceuticals to tissue engineering and microfluidic chips. Microfluidic chips are of particular interest and importance for the field of biotechnology, since they allow for the analysis and screening of a wide range of biomolecules - including single cells, proteins, and DNA. The fabrication of microfluidic chips has historically been time-consuming, however, and is typically limited to 2.5 dimensional structures and a restricted palette of well-known materials. Due to the high surface-to-volume ratios in microfluidic chips, the nature of the chip material is of paramount importance to the final system behavior. With the emergence of 3D printing, however, a wide range of microfluidic systems are now being printed for the first time in a manner that facilitates flexibility while minimizing time and cost. Nevertheless, resolution and material choices still remain challenges and in the focus of current research, aiming for (1) 3D printing with high resolutions in the range of tens of micrometers and (2) a wider range of available materials for these high-resolution prints. The first part of this chapter highlights recent emerging technologies in the field of high-resolution printing via stereolithography (SL) and 2-photon polymerization (2PP) and seeks to identify particularly interesting emerging technologies which could have a major impact on the field in the near future. The second part of this chapter highlights current developments in the field of materials that are used for these high-resolution 3D printing technologies.
Collapse
Affiliation(s)
- Frederik Kotz
- Laboratory of Process Technology, NeptunLab, Department of Microsystems Engineering (IMTEK), University Freiburg, Freiburg, Germany.
- Freiburg Materials Research Center (FMF), University Freiburg, Freiburg, Germany.
| | - Dorothea Helmer
- Laboratory of Process Technology, NeptunLab, Department of Microsystems Engineering (IMTEK), University Freiburg, Freiburg, Germany
- Freiburg Materials Research Center (FMF), University Freiburg, Freiburg, Germany
- FIT Freiburg Centre for Interactive Materials and Bioinspired Technologies, University Freiburg, Freiburg, Germany
| | - Bastian E Rapp
- Laboratory of Process Technology, NeptunLab, Department of Microsystems Engineering (IMTEK), University Freiburg, Freiburg, Germany
- Freiburg Materials Research Center (FMF), University Freiburg, Freiburg, Germany
- FIT Freiburg Centre for Interactive Materials and Bioinspired Technologies, University Freiburg, Freiburg, Germany
| |
Collapse
|
13
|
Microfluidic-Based Approaches for Foodborne Pathogen Detection. Microorganisms 2019; 7:microorganisms7100381. [PMID: 31547520 PMCID: PMC6843441 DOI: 10.3390/microorganisms7100381] [Citation(s) in RCA: 39] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2019] [Revised: 09/15/2019] [Accepted: 09/16/2019] [Indexed: 12/18/2022] Open
Abstract
Food safety is of obvious importance, but there are frequent problems caused by foodborne pathogens that threaten the safety and health of human beings worldwide. Although the most classic method for detecting bacteria is the plate counting method, it takes almost three to seven days to get the bacterial results for the detection. Additionally, there are many existing technologies for accurate determination of pathogens, such as polymerase chain reaction (PCR), enzyme linked immunosorbent assay (ELISA), or loop-mediated isothermal amplification (LAMP), but they are not suitable for timely and rapid on-site detection due to time-consuming pretreatment, complex operations and false positive results. Therefore, an urgent goal remains to determine how to quickly and effectively prevent and control the occurrence of foodborne diseases that are harmful to humans. As an alternative, microfluidic devices with miniaturization, portability and low cost have been introduced for pathogen detection. In particular, the use of microfluidic technologies is a promising direction of research for this purpose. Herein, this article systematically reviews the use of microfluidic technology for the rapid and sensitive detection of foodborne pathogens. First, microfluidic technology is introduced, including the basic concepts, background, and the pros and cons of different starting materials for specific applications. Next, the applications and problems of microfluidics for the detection of pathogens are discussed. The current status and different applications of microfluidic-based technologies to distinguish and identify foodborne pathogens are described in detail. Finally, future trends of microfluidics in food safety are discussed to provide the necessary foundation for future research efforts.
Collapse
|
14
|
Walker M, Humphries S. 3D Printing: Applications in evolution and ecology. Ecol Evol 2019; 9:4289-4301. [PMID: 31016005 PMCID: PMC6468079 DOI: 10.1002/ece3.5050] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2018] [Revised: 02/17/2019] [Accepted: 02/19/2019] [Indexed: 01/03/2023] Open
Abstract
In the commercial and medical sectors, 3D printing is delivering on its promise to enable a revolution. However, in the fields of Ecology and Evolution we are only on the brink of embracing the advantages that 3D printing can offer. Here we discuss examples where the process has enabled researchers to develop new techniques, work with novel species, and to enhance the impact of outreach activities. Our aim is to showcase the potential that 3D printing offers in terms of improved experimental techniques, greater flexibility, reduced costs and promoting open science, while also discussing its limitations. By taking a general overview of studies using the technique from fields across the broad range of Ecology and Evolution, we show the flexibility of 3D printing technology and aim to inspire the next generation of discoveries.
Collapse
|
15
|
Ren Y, Ray S, Liu Y. Reconfigurable Acrylic-tape Hybrid Microfluidics. Sci Rep 2019; 9:4824. [PMID: 30886239 PMCID: PMC6423117 DOI: 10.1038/s41598-019-41208-y] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2018] [Accepted: 02/26/2019] [Indexed: 12/22/2022] Open
Abstract
There is a great interest in low-cost, versatile microfluidic platforms of which the fabrication processes are rapid, straightforward, and translatable to industrial mass productions. In addition, it is beneficial for microfluidic devices to be reconfigurable in the field, so that multiple functions can be realized by a minimum number of devices. Here, we present a versatile acrylic-tape platform which allows highly accessible rapid prototyping of microfluidic devices, as well as device reconfiguration to realize different functions. The clean-room-free fabrication and sealing process only requires a laser cutter, acrylic, and tapes and can be done by an untrained person in the field. We experimentally characterized the relationship between the capillary flow speed and the channel height, the latter of which can be well controlled by the fabrication process. Reconfiguration of microfluidic functions was demonstrated on a single acrylic-tape device, thanks to the reversible sealing enabled by functional tapes. Different pumping mechanisms, including on-chip pumps for better portability and syringe pumps for precise fluid control, have been employed for the demonstration of two-phase flow and droplet generation, respectively. The low-cost and versatile acrylic-tape microfluidic devices are promising tools for applications in a wide range of fields, especially for point-of-care biomedical and clinical applications.
Collapse
Affiliation(s)
- Yundong Ren
- Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA, 01609, USA
| | - Subhrodeep Ray
- Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA, 01609, USA
| | - Yuxiang Liu
- Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA, 01609, USA.
| |
Collapse
|
16
|
Babic J, Griscom L, Cramer J, Coudreuse D. An easy-to-build and re-usable microfluidic system for live-cell imaging. BMC Cell Biol 2018; 19:8. [PMID: 29925307 PMCID: PMC6011407 DOI: 10.1186/s12860-018-0158-z] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2017] [Accepted: 06/11/2018] [Indexed: 12/26/2022] Open
Abstract
Background Real-time monitoring of cellular responses to dynamic changes in their environment or to specific treatments has become central to cell biology. However, when coupled to live-cell imaging, such strategies are difficult to implement with precision and high time resolution, and the simultaneous alteration of multiple parameters is a major challenge. Recently, microfluidics has provided powerful solutions for such analyses, bringing an unprecedented level of control over the conditions and the medium in which cells under microscopic observation are grown. However, such technologies have remained under-exploited, largely as a result of the complexity associated with microfabrication procedures. Results In this study, we have developed simple but powerful microfluidic devices dedicated to live-cell imaging. These microsystems take advantage of a robust elastomer that is readily available to researchers and that presents excellent bonding properties, in particular to microscopy-grade glass coverslips. Importantly, the chips are easy-to-build without sophisticated equipment, and they are compatible with the integration of complex, customized fluidic networks as well as with the multiplexing of independent assays on a single device. We show that the chips are re-usable, a significant advantage for the popularization of microfluidics in cell biology. Moreover, we demonstrate that they allow for the dynamic, accurate and simultaneous control of multiple parameters of the cellular environment. Conclusions While they do not possess all the features of the microdevices that are built using complex and costly procedures, the simplicity and versatility of the chips that we have developed make them an attractive alternative for a range of applications. The emergence of such devices, which can be fabricated and used by any laboratory, will provide the possibility for a larger number of research teams to take full advantage of these new methods for investigating cell biology. Electronic supplementary material The online version of this article (10.1186/s12860-018-0158-z) contains supplementary material, which is available to authorized users.
Collapse
Affiliation(s)
- Julien Babic
- SyntheCell team, Institute of Genetics and Development of Rennes, CNRS UMR 6290, 2 avenue du Pr. Léon Bernard, 35043, Rennes, France
| | - Laurent Griscom
- SyntheCell team, Institute of Genetics and Development of Rennes, CNRS UMR 6290, 2 avenue du Pr. Léon Bernard, 35043, Rennes, France
| | | | - Damien Coudreuse
- SyntheCell team, Institute of Genetics and Development of Rennes, CNRS UMR 6290, 2 avenue du Pr. Léon Bernard, 35043, Rennes, France.
| |
Collapse
|
17
|
Béné MC. Microfluidics in flow cytometry and related techniques. Int J Lab Hematol 2017; 39 Suppl 1:93-97. [PMID: 28447416 DOI: 10.1111/ijlh.12669] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2017] [Accepted: 03/03/2017] [Indexed: 12/17/2022]
Abstract
Technological advances in laboratory automation are now well understood and applied as they considerably improved the speed and robustness of haematological laboratory data, in the companion fields of blood analyzers and flow cytometry. Still rather confidential is the field of microfluidics, mostly confined so far to academic settings and research laboratories. The literature in the field of microfluidics is growing and applications in hematology range from cell counting to flow cytometry, cell sorting, or ex vivo testing. A literature search allows to identify many innovative solutions developed to master the specific physics of fluid movements in microchips. Miniaturization also dwells on findings that have emerged from different areas such as electronics and nanoengineering. This review proposes an overview of the major principles guiding developments in microfluidics and describes a necessarily limited and nonexhaustive series of specific applications. Readers are strongly encouraged to consult the documents referred to in the references section to learn more about this world knocking at our door and possibly liable to revolutionize our profession of hematology biologists in a not so far future.
Collapse
Affiliation(s)
- M C Béné
- Hematology Biology, University Hospital, Nantes, France
| |
Collapse
|
18
|
Ching SH, Bansal N, Bhandari B. Alginate gel particles-A review of production techniques and physical properties. Crit Rev Food Sci Nutr 2017; 57:1133-1152. [PMID: 25976619 DOI: 10.1080/10408398.2014.965773] [Citation(s) in RCA: 289] [Impact Index Per Article: 41.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
Abstract
The application of hydrocolloid gel particles is potentially useful in food, chemical, and pharmaceutical industries. Alginate gel particles are one of the more commonly used hydrocolloid gel particles due to them being biocompatible, nontoxic, biodegradable, cheap, and simple to produce. They are particularly valued for their application in encapsulation. Encapsulation in alginate gel particles confers protective benefits to cells, DNA, nutrients, and microbes. Slow release of flavors, minerals, and drugs can also be achieved by encapsulation in gel particles. The particle size and shape of the gel particles are crucial for specific applications. In this review, current methods of producing alginate gel particles will be discussed, taking into account their advantages, disadvantages, scalability, and impact on particle size. The physical properties of alginate gel particles will determine the effectiveness in different application conditions. This review will cover the current understanding of the alginate biopolymer, gelation mechanisms and factors affecting release properties, gel strength, and rheology of the alginate gel particle systems.
Collapse
Affiliation(s)
- Su Hung Ching
- a School of Agriculture and Food Sciences, The University of Queensland , Brisbane , Queensland , Australia
| | - Nidhi Bansal
- a School of Agriculture and Food Sciences, The University of Queensland , Brisbane , Queensland , Australia
| | - Bhesh Bhandari
- a School of Agriculture and Food Sciences, The University of Queensland , Brisbane , Queensland , Australia
| |
Collapse
|
19
|
Guo Z, Yu T, He J, Liu F, Hao H, Zhao Y, Wen J, Wang Q. An integrated microfluidic chip for the detection of bacteria – A proof of concept. Mol Cell Probes 2015; 29:223-7. [DOI: 10.1016/j.mcp.2015.05.005] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2015] [Revised: 05/09/2015] [Accepted: 05/11/2015] [Indexed: 10/23/2022]
|
20
|
Ho CMB, Ng SH, Li KHH, Yoon YJ. 3D printed microfluidics for biological applications. LAB ON A CHIP 2015; 15:3627-37. [PMID: 26237523 DOI: 10.1039/c5lc00685f] [Citation(s) in RCA: 369] [Impact Index Per Article: 41.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
The term "Lab-on-a-Chip," is synonymous with describing microfluidic devices with biomedical applications. Even though microfluidics have been developing rapidly over the past decade, the uptake rate in biological research has been slow. This could be due to the tedious process of fabricating a chip and the absence of a "killer application" that would outperform existing traditional methods. In recent years, three dimensional (3D) printing has been drawing much interest from the research community. It has the ability to make complex structures with high resolution. Moreover, the fast building time and ease of learning has simplified the fabrication process of microfluidic devices to a single step. This could possibly aid the field of microfluidics in finding its "killer application" that will lead to its acceptance by researchers, especially in the biomedical field. In this paper, a review is carried out of how 3D printing helps to improve the fabrication of microfluidic devices, the 3D printing technologies currently used for fabrication and the future of 3D printing in the field of microfluidics.
Collapse
Affiliation(s)
- Chee Meng Benjamin Ho
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore (639798).
| | | | | | | |
Collapse
|
21
|
Kopito RB, Levine E. Durable spatiotemporal surveillance of Caenorhabditis elegans response to environmental cues. LAB ON A CHIP 2014; 14:764-770. [PMID: 24336777 DOI: 10.1039/c3lc51061a] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Animal response to changes in environmental cues is a complex dynamical process that occurs at diverse molecular and cellular levels. To gain a quantitative understanding of such processes, it is desirable to observe many individuals, subjected to repeatable and well defined environmental cues over long time periods. Here we present WormSpa, a microfluidic system where worms are individually confined in optimized chambers. We show that worms in WormSpa are neither stressed nor starved, and in particular exhibit pumping and egg-laying behaviors equivalent to those of freely behaving worms. We demonstrate the applicability of WormSpa for studying stress response and physiological processes. WormSpa is simple to make and easy to operate, and its design is modular, making it straightforward to incorporate available microfluidic technologies. We expect that WormSpa would open novel avenues of research, hitherto impossible or impractical.
Collapse
Affiliation(s)
- Ronen B Kopito
- Department of Physics and FAS Center for Systems Biology, Harvard University, 52 Oxford St, Cambridge, MA 02138, USA.
| | | |
Collapse
|
22
|
Pai JH, Kluckman K, Cowley DO, Bortner DM, Sims CE, Allbritton NL, Allbritton NL. Efficient division and sampling of cell colonies using microcup arrays. Analyst 2013; 138:220-8. [PMID: 23099535 PMCID: PMC3509232 DOI: 10.1039/c2an36065a] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
A microengineered array to sample clonal colonies is described. The cells were cultured on an array of individually releasable elements until the colonies expanded to cover multiple elements. Single elements were released using a laser-based system and collected to sample cells from individual colonies. A greater than an 85% rate in splitting and collecting colonies was achieved using a 3-dimensional cup-like design or "microcup". Surface modification using patterned titanium deposition of the glass substrate improved the stability of microcup adhesion to the glass while enabling minimization of the laser energy for splitting the colonies. Smaller microcup dimensions and slotting the microcup walls reduced the time needed for colonies to expand into multiple microcups. The stem cell colony retained on the array and the collected fraction within released microcups remained undifferentiated and viable. The colony samples were characterized by both reporter gene expression and a destructive assay (PCR) to identify target colonies. The platform is envisioned as a means to rapidly establish cell lines using a destructive assay to identify desired clones.
Collapse
Affiliation(s)
- Jeng-Hao Pai
- Department of Chemistry, University of North Carolina, Chapel Hill, NC 27599, Fax: +1 (919) 962-2388, Tel: +1 (919) 966-2291
| | | | - Dale O. Cowley
- TransViragen, Inc., PO Box 110301, Research Triangle Park, NC 27709
| | - Donna M. Bortner
- TransViragen, Inc., PO Box 110301, Research Triangle Park, NC 27709
| | - Christopher E. Sims
- Department of Chemistry, University of North Carolina, Chapel Hill, NC 27599, Fax: +1 (919) 962-2388, Tel: +1 (919) 966-2291
| | - Nancy L. Allbritton
- Department of Chemistry, University of North Carolina, Chapel Hill, NC 27599, Fax: +1 (919) 962-2388, Tel: +1 (919) 966-2291
| | - Nancy L. Allbritton
- Department of Biomedical Engineering, University of North Carolina, Chapel Hill, NC 27599, North Carolina State University, Raleigh, NC 27695
| |
Collapse
|
23
|
Gach PC, Xu W, King SJ, Sims CE, Bear J, Allbritton NL. Microfabricated arrays for splitting and assay of clonal colonies. Anal Chem 2012; 84:10614-20. [PMID: 23153031 PMCID: PMC3525785 DOI: 10.1021/ac301895t] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
A microfabricated platform was developed for highly parallel and efficient colony picking, splitting, and clone identification. A pallet array provided patterned cell colonies which mated to a second printing array composed of bridging microstructures formed by a supporting base and attached post. The posts enabled mammalian cells from colonies initially cultured on the pallet array to migrate to corresponding sites on the printing array. Separation of the arrays simultaneously split the colonies, creating a patterned replica. Optimization of array elements provided transfer efficiencies greater than 90% using bridging posts of 30 μm diameter and 100 μm length and total colony numbers of 3000. Studies using five mammalian cell lines demonstrated that a variety of adherent cell types could be cultured and effectively split with printing efficiencies of 78-92%. To demonstrate the technique's utility, clonal cell lines with siRNA knockdown of Coronin 1B were generated using the arrays and compared to a traditional FACS/Western Blotting-based approach. Identification of target clones required a destructive assay to identify cells with an absence of Coronin 1B brought about by the successful infection of interfering shRNA construct. By virtue of miniaturization and its parallel format, the platform enabled the identification and generation of 12 target clones from a starting sample of only 3900 cells and required only 5 man hours over 11 days. In contrast, the traditional method required 500,000 cells and generated only 5 target clones with 34 man hours expended over 47 days. These data support the considerable reduction in time, manpower, and reagents using the miniaturized platform for clonal selection by destructive assay versus conventional approaches.
Collapse
Affiliation(s)
- Philip C. Gach
- Department of Chemistry, University of North Carolina, Chapel Hill, North Carolina 27599, USA
| | - Wei Xu
- Department of Chemistry, University of North Carolina, Chapel Hill, North Carolina 27599, USA
| | - Samantha J. King
- Department of Cell & Development Biology, University of North Carolina, Chapel Hill, NC 27599
| | - Christopher E. Sims
- Department of Chemistry, University of North Carolina, Chapel Hill, North Carolina 27599, USA
| | - James Bear
- Department of Cell & Development Biology, University of North Carolina, Chapel Hill, NC 27599
| | - Nancy L. Allbritton
- Department of Chemistry, University of North Carolina, Chapel Hill, North Carolina 27599, USA
- Department of Biomedical Engineering, University of North Carolina, Chapel Hill, NC 27599 and North Carolina State University, Raleigh, NC 27695
| |
Collapse
|
24
|
Gözen I, Jesorka A. Instrumental Methods to Characterize Molecular Phospholipid Films on Solid Supports. Anal Chem 2012; 84:822-38. [DOI: 10.1021/ac203126f] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Affiliation(s)
- Irep Gözen
- Department of Chemical and Biological
Engineering, Chalmers University of Technology, Kemivägen 10, 41296 Göteborg, Sweden
| | - Aldo Jesorka
- Department of Chemical and Biological
Engineering, Chalmers University of Technology, Kemivägen 10, 41296 Göteborg, Sweden
| |
Collapse
|
25
|
Liu YH, Wang CH, Wu JJ, Lee GB. Rapid detection of live methicillin-resistant Staphylococcus aureus by using an integrated microfluidic system capable of ethidium monoazide pre-treatment and molecular diagnosis. BIOMICROFLUIDICS 2012; 6:34119. [PMID: 24019858 PMCID: PMC3461804 DOI: 10.1063/1.4748358] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2012] [Accepted: 08/13/2012] [Indexed: 05/06/2023]
Abstract
Methicillin-resistant Staphylococcus aureus (MRSA) is a bacterium resistant to all existing penicillin and lactam-based antimicrobial drugs and, therefore, has become one of the most prevalent antibiotic-resistant pathogens found in hospitals. The multi-drug resistant characteristics of MRSA make it challenging to clinically treat infected patients. Therefore, early diagnosis of MRSA has become a public-health priority worldwide. Conventionally, cell-culture based methodology and microscopic identification are commonly used for MRSA detection. However, they are relatively time-consuming and labor-intensive. Recently, molecular diagnosis based on nucleic acid amplification techniques, such as polymerase chain reaction (PCR), has been widely investigated for the rapid detection of MRSA. However, genomic DNA of both live and dead pathogens can be distinguished by conventional PCR. These results thus could not provide sufficient confirmation of an active infection for clinicians. In this study, live MRSA was rapidly detected by using a new integrated microfluidic system. The microfluidic system has been demonstrated to have 100% specificity to detect live MRSA with S. aureus and other pathogens commonly found in hospitals. The experimental results showed that the limit of detection for live MRSA from biosamples was approximately 10(2) CFU/μl. In addition, the entire diagnostic protocol, from sample pre-treatment to fluorescence observation, can be automatically completed within 2.5 h. Consequently, this microfluidic system may be a powerful tool for the rapid molecular diagnosis of live MRSA.
Collapse
Affiliation(s)
- Yu-Hsin Liu
- Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan 701
| | | | | | | |
Collapse
|
26
|
Zamò A, Bertolaso A, van Raaij AWM, Mancini F, Scardoni M, Montresor M, Menestrina F, van Krieken JHJM, Chilosi M, Groenen PJTA, Scarpa A. Application of microfluidic technology to the BIOMED-2 protocol for detection of B-cell clonality. J Mol Diagn 2011; 14:30-7. [PMID: 22026958 DOI: 10.1016/j.jmoldx.2011.07.007] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2010] [Revised: 07/18/2011] [Accepted: 07/22/2011] [Indexed: 11/30/2022] Open
Abstract
The BIOMED-2 protocol is widely used for detecting clonality in lymphoproliferative disorders. The protocol requires multiple PCR reactions, which are analyzed by either capillary electrophoresis (GeneScan analysis) or heteroduplex PAGE analysis. We tested a microfluidic chip-based electrophoresis device (Agilent 2100 Bioanalyzer) for the analysis of B-cell clonality using PCR for the three framework subregions (FR) of the Ig heavy chain gene (IGH) and PCR for two rearrangements occurring in the Ig κ chain gene (IGK-VJ and IGK-DE). We analyzed 62 B-cell lymphomas (33 follicular and 29 nonfollicular) and 16 reactive lymph nodes. Chip-based electrophoresis was conclusive for monoclonality in 59/62 samples; for 20 samples, it was compared with GeneScan analysis. Concordant results were obtained in 45/55 IGH (FR1, FR2, and FR3) gene rearrangements, and in 34/37 IGK gene rearrangements. However, when the chip device was used to analyze selected IGK gene rearrangements (biallelic IGK rearrangements or IGK rearrangements in a polyclonal background), its performance was not completely accurate. We conclude, therefore, that this microfluidic chip-based electrophoresis device is reliable for testing cases with dominant PCR products but is less sensitive than GeneScan in detecting clonal peaks in a polyclonal background for IGH PCR, or with complex IGK rearrangement patterns.
Collapse
Affiliation(s)
- Alberto Zamò
- Department of Pathology and Diagnostics, Section of Anatomic Pathology, University of Verona, Verona, Italy.
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
27
|
Koyama S. Electrically modulated attachment and detachment of animal cells cultured on an optically transparent patterning electrode. J Biosci Bioeng 2011; 111:574-83. [DOI: 10.1016/j.jbiosc.2010.12.027] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2010] [Revised: 12/28/2010] [Accepted: 12/30/2010] [Indexed: 10/18/2022]
|
28
|
Randall CL, Kalinin YV, Jamal M, Manohar T, Gracias DH. Three-dimensional microwell arrays for cell culture. LAB ON A CHIP 2011; 11:127-31. [PMID: 21063585 DOI: 10.1039/c0lc00368a] [Citation(s) in RCA: 46] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
We propose the concept of three-dimensional (3D) microwell arrays for cell culture applications and highlight the importance of oxygen diffusion through pores in all three dimensions to enhance cell viability.
Collapse
Affiliation(s)
- Christina L Randall
- Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD 21205, USA
| | | | | | | | | |
Collapse
|
29
|
Wlodkowic D, Darzynkiewicz Z. Rise of the micromachines: microfluidics and the future of cytometry. Methods Cell Biol 2011; 102:105-25. [PMID: 21704837 DOI: 10.1016/b978-0-12-374912-3.00005-5] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The past decade has brought many innovations to the field of flow and image-based cytometry. These advancements can be seen in the current miniaturization trends and simplification of analytical components found in the conventional flow cytometers. On the other hand, the maturation of multispectral imaging cytometry in flow imaging and the slide-based laser scanning cytometers offers great hopes for improved data quality and throughput while proving new vistas for the multiparameter, real-time analysis of cells and tissues. Importantly, however, cytometry remains a viable and very dynamic field of modern engineering. Technological milestones and innovations made over the last couple of years are bringing the next generation of cytometers out of centralized core facilities while making it much more affordable and user friendly. In this context, the development of microfluidic, lab-on-a-chip (LOC) technologies is one of the most innovative and cost-effective approaches toward the advancement of cytometry. LOC devices promise new functionalities that can overcome current limitations while at the same time promise greatly reduced costs, increased sensitivity, and ultra high throughputs. We can expect that the current pace in the development of novel microfabricated cytometric systems will open up groundbreaking vistas for the field of cytometry, lead to the renaissance of cytometric techniques and most importantly greatly support the wider availability of these enabling bioanalytical technologies.
Collapse
Affiliation(s)
- Donald Wlodkowic
- The BioMEMS Research Group, Department of Chemistry, University of Auckland, Auckland, New Zealand
| | | |
Collapse
|
30
|
Wang CH, Lien KY, Wang TY, Chen TY, Lee GB. An integrated microfluidic loop-mediated-isothermal-amplification system for rapid sample pre-treatment and detection of viruses. Biosens Bioelectron 2010; 26:2045-52. [PMID: 20869865 DOI: 10.1016/j.bios.2010.08.083] [Citation(s) in RCA: 69] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2010] [Revised: 08/27/2010] [Accepted: 08/31/2010] [Indexed: 11/25/2022]
Abstract
This study presents a novel automatic assay for targeted ribonucleic acid (RNA) extraction and a one-step reverse transcription loop-mediated-isothermal-amplification (RT-LAMP) process for the rapid detection of viruses from tissue samples by utilizing an integrated microfluidic system. By utilizing specific probe-conjugated magnetic beads, target RNA samples can be specifically recognized and hybridized onto the surface of the magnetic beads which are mixed with whole tissue lysates, followed by the synthesis of complementary deoxyribonucleic acid (cDNA) and isothermal amplification of target genes simultaneously with the incorporation of two specific primer sets. The nervous necrosis virus (NNV), the most common aquaculture pathogen, with a mortality rate in infected fish ranging from 80% to 100%, has been selected to verify the performance of the developed miniature system. Experimental results showed that the sensitivity of the integrated microfluidic LAMP system is about 100-fold higher when compared to a conventional one-step reverse-transcript polymerase chain reaction (RT-PCR) process. Significantly, the entire protocol from sample pre-treatment to target gene amplification can be completed within 60 min in an automatic manner without cross-reactions with other tested virus, bacteria and eukaryotic cells. Consequently, this integrated microfluidic LAMP system may provide a powerful platform for rapid purification and detection of virus samples.
Collapse
Affiliation(s)
- Chih-Hung Wang
- Department of Engineering Science, National Cheng Kung University, Tainan 701, Taiwan
| | | | | | | | | |
Collapse
|
31
|
How do cells make decisions: engineering micro- and nanoenvironments for cell migration. JOURNAL OF ONCOLOGY 2010; 2010:363106. [PMID: 20652046 PMCID: PMC2905916 DOI: 10.1155/2010/363106] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/12/2010] [Accepted: 04/01/2010] [Indexed: 11/17/2022]
Abstract
Cell migration contributes to cancer metastasis and involves cell adhesion to the extracellular matrix (ECM), force generation through the cell's cytoskeletal, and finally cell detachment. Both adhesive cues from the ECM and soluble cues from neighbouring cells and tissue trigger intracellular signalling pathways that are essential for cell migration. While the machinery of many signalling pathways is relatively well understood, how hierarchies of different and conflicting signals are established is a new area of cellular cancer research. We examine the recent advances in microfabrication, microfluidics, and nanotechnology that can be utilized to engineer micro- and nanoscaled cellular environments. Controlling both adhesive and soluble cues for migration may allow us to decipher how cells become motile, choose the direction for migration, and how oncogenic transformations influences these decision-making processes.
Collapse
|