Periplasmic chaperones used to enhance functional secretion of proteins in E. coli

Stabilization challenges and aggregation in protein-based therapeutics in the pharmaceutical industry

Protein-based therapeutics have revolutionized the pharmaceutical industry and become vital components in the development of future therapeutics. They offer several advantages over traditional small molecule drugs, including high affinity, potency and specificity, while demonstrating low toxicity and minimal adverse effects. However, the development and manufacturing processes of protein-based therapeutics presents challenges related to protein folding, purification, stability and immunogenicity that should be addressed. These proteins, like other biological molecules, are prone to chemical and physical instabilities. The stability of protein-based drugs throughout the entire manufacturing, storage and delivery process is essential. The occurrence of structural instability resulting from misfolding, unfolding, and modifications, as well as aggregation, poses a significant risk to the efficacy of these drugs, overshadowing their promising attributes. Gaining insight into structural alterations caused by aggregation and their impact on immunogenicity is vital for the advancement and refinement of protein therapeutics. Hence, in this review, we have discussed some features of protein aggregation during production, formulation and storage as well as stabilization strategies in protein engineering and computational methods to prevent aggregation.

Nanobodies as molecular imaging probes

Camelidae derived single-domain antibodies (sdAbs), commonly known as nanobodies (Nbs), are the smallest antibody fragments with full antigen-binding capacity. Owing to their desirable properties such as small size, high specificity, strong affinity, excellent stability, and modularity, nanobodies are on their way to overtake conventional antibodies in terms of popularity. To date, a broad range of nanobodies have been generated against different molecular targets with applications spanning basic research, diagnostics, and therapeutics. In the field of molecular imaging, nanobody-based probes have emerged as a powerful tool. Radioactive or fluorescently labeled nanobodies are now used to detect and track many targets in different biological systems using imaging techniques. In this review, we provide an overview of the use of nanobodies as molecular probes. Additionally, we discuss current techniques for the generation, conjugation, and intracellular delivery of nanobodies.

Overproducing the BAM complex improves secretion of difficult-to-secrete recombinant autotransporter chimeras

Monomeric autotransporters have been used extensively to transport recombinant proteins or protein domains to the cell surface of Gram-negative bacteria amongst others for antigen display. Genetic fusion of such antigens into autotransporters has yielded chimeras that can be used for vaccination purposes. However, not every fusion construct is transported efficiently across the cell envelope. Problems occur in particular when the fused antigen attains a relatively complex structure in the periplasm, prior to its translocation across the outer membrane. The latter step requires the interaction with periplasmic chaperones and the BAM (β-barrel assembly machinery) complex in the outer membrane. This complex catalyzes insertion and folding of β-barrel outer membrane proteins, including the β-barrel domain of autotransporters. Here, we investigated whether the availability of periplasmic chaperones or the BAM complex is a limiting factor for the surface localization of difficult-to-secrete chimeric autotransporter constructs. Indeed, we found that overproduction of in particular the BAM complex, increases surface display of difficult-to-secrete chimeras. Importantly, this beneficial effect appeared to be generic not only for a number of monomeric autotransporter fusions but also for fusions to trimeric autotransporters. Therefore, overproduction of BAM might be an attractive strategy to improve the production of recombinant autotransporter constructs.

Evolution of Escherichia coli Expression System in Producing Antibody Recombinant Fragments

Antibodies and antibody-derived molecules are continuously developed as both therapeutic agents and key reagents for advanced diagnostic investigations. Their application in these fields has indeed greatly expanded the demand of these molecules and the need for their production in high yield and purity. While full-length antibodies require mammalian expression systems due to the occurrence of functionally and structurally important glycosylations, most antibody fragments and antibody-like molecules are non-glycosylated and can be more conveniently prepared in E. coli-based expression platforms. We propose here an updated survey of the most effective and appropriate methods of preparation of antibody fragments that exploit E. coli as an expression background and review the pros and cons of the different platforms available today. Around 250 references accompany and complete the review together with some lists of the most important new antibody-like molecules that are on the market or are being developed as new biotherapeutics or diagnostic agents.

Translocation from the chloroplast stroma into the thylakoid lumen allows expression of recombinant epidermal growth factor in transplastomic tobacco plants

Chloroplast transformation has many potential advantages for the production of recombinant proteins in plants. However, it has been reported that chloroplast expression of many proteins, such as human epidermal growth factor (hEGF), results hindered by post-transcriptional mechanisms. hEGF degradation has been related to the redox potential of the stroma and protein misfolding. To solve this problem, we proposed the redirection of hEGF into the thylakoid lumen where the environment could improve disulfide bonds formation stabilizing the functional conformation of the protein. We generated transplastomic tobacco plants targeting hEGF protein to the thylakoid lumen by adding a transit peptide (Str). Following this approach, we could detect thylakoid lumen-targeted hEGF by western blotting while stromal accumulation of hEGF remained undetectable. Southern blot analysis confirmed the integration of the transgene through homologous recombination into the plastome. Northern blot analysis showed similar levels of egf transcripts in the EGF and StrEGF lines. These results suggest that higher stability of the hEGF peptide in the thylakoid lumen is the primary cause of the increased accumulation of the recombinant protein observed in StrEGF lines. They also highlight the necessity of exploring different sub-organellar destinations to improve the accumulation levels of a specific recombinant protein in plastids.

High-yield production of recombinant platelet factor 4 by harnessing and honing the gram-negative bacterial secretory apparatus

Platelet factor 4 is a cytokine released into the bloodstream by activated platelets where it plays a pivotal role in etiology and diagnosis of heparin-induced thrombocytopenia. Therefore, a sustainable source of recombinant PF4 with structural and functional similarity to its native form is urgently needed to be used in diagnostic procedures. To this end, a three-in-one primary construct was designed from which three secondary constructs can be derived each capable of employing either type I, type II secretory or cytoplasmic pathways. Protein expression and secretion were performed in Escherichia coli BL21 (DE3) and confirmed by SDS-PAGE and Western blotting. To further enhance protein secretion, the effect of several controllable chemical factors including IPTG, Triton X-100, sucrose, and glycine were individually investigated at the outset. In the next step, according to a fractional factorial approach, the synergistic effects of IPTG, Triton X-100, and glycine on secretion were further investigated. To ascertain the structure and function of the secreted recombinant proteins, dynamic light scattering was utilized to confirm the rPF4 tetramerization and heparin-mediated ultra-large complex formation. Moreover, Raman spectroscopy and Western blotting were exploited to evaluate the secondary and quaternary structures, respectively. The type II secretory pathway was proven to be superior to type I in the case of rPF4 secretion. Supplementation with chemical enhancers improved the protein secretion mediated by the Type II system to approximately more than 500 μg/mL. Large quantities of native rPF4 up to 20 mg were purified as the culture medium was scaled up to 40 mL. Western blotting confirmed the formation of dimers and tetramers in the secreted rPF4 proteins. Dynamic light scattering revealed the rPF4 oligomerization into of larger complexes of approximately 100-1200 nm in size following heparin supplementation, implying proper protein folding and tetramerization. Moreover, the rPF4 secondary structure was found to be 43.5% Random coil, 32.5% β-sheet, 18.6% α-helix and 4.9% Turn, which is in perfect agreement with the native structure. Our results indicate that the gram-negative type II bacterial secretory system holds a great promise as a reliable protein production strategy with industrial applications. However, further efforts are required to realize the full potential of secretory pathways regarding their application to proteins with distinct characteristics.

Soluble expression of IGF1 fused to DsbA in SHuffle™ T7 strain: optimization of expression and purification by Box-Behnken design

Production of insulin-like growth factor 1 (IGF1) in Escherichia coli mostly results in the formation of inclusion bodies. In the present study, IGF1 was fused to disulfide bond oxidoreductase A (DsbA) and expressed in SHuffle™ T7 strain, in order to obtain correctly folded protein. Soluble expression and IMAC purification of DsbA-IGF1 were optimized by applying the Box-Behnken design of response surface methodology. The optimization greatly increased concentration of soluble protein from 317 to 2600 mg/L, and IMAC yield from 400 to 1900 mg/L. Results of ANOVA showed induction OD600 and temperature had significant effects on the soluble protein expression while isopropyl-β-d thiogalactoside, in the concentrations tested, displayed no significant effect. Moreover, the three parameters of the binding buffer including, pH, concentration of NaCl, and imidazole displayed significant effects on the IMAC yield. Then, purified DsbA-IGF1 was cleaved by human rhinovirus 3C protease, and authentic IGF1 was obtained in flow through of a subtractive IMAC. Final polishing of the protein by reversed-phase HPLC yielded IGF1 with purity of 96%. The quality attributes of purified IGF1 such as purity, identity, molecular size, molecular weight, secondary structure, and biological activity were assessed and showed to be comparable to the standard IGF1. The final yield of purified IGF1 was estimated to be 120 ± 18 mg from 1 L of the culture. Our results demonstrated a simple and easily scalable strategy for production of large amounts of bioactive IGF1 by rational designing soluble protein expression, and further optimization of expression and purification methods.

Peptidyl-Prolyl-cis/trans-Isomerases Mip and PpiB of Legionella pneumophila Contribute to Surface Translocation, Growth at Suboptimal Temperature, and Infection

The gammaproteobacterium Legionella pneumophila is the causative agent of Legionnaires' disease, an atypical pneumonia that manifests itself with severe lung damage. L. pneumophila, a common inhabitant of freshwater environments, replicates in free-living amoebae and persists in biofilms in natural and man-made water systems. Its environmental versatility is reflected in its ability to survive and grow within a broad temperature range as well as its capability to colonize and infect a wide range of hosts, including protozoa and humans. Peptidyl-prolyl-cis/trans-isomerases (PPIases) are multifunctional proteins that are mainly involved in protein folding and secretion in bacteria. In L. pneumophila the surface-associated PPIase Mip was shown to facilitate the establishment of the intracellular infection cycle in its early stages. The cytoplasmic PpiB was shown to promote cold tolerance. Here, we set out to analyze the interrelationship of these two relevant PPIases in the context of environmental fitness and infection. We demonstrate that the PPIases Mip and PpiB are important for surfactant-dependent sliding motility and adaptation to suboptimal temperatures, features that contribute to the environmental fitness of L. pneumophila Furthermore, they contribute to infection of the natural host Acanthamoeba castellanii as well as human macrophages and human explanted lung tissue. These effects were additive in the case of sliding motility or synergistic in the case of temperature tolerance and infection, as assessed by the behavior of the double mutant. Accordingly, we propose that Mip and PpiB are virulence modulators of L. pneumophila with compensatory action and pleiotropic effects.

Effects of lithium on the secretory production of recombinant antibody from insect cells

Monoclonal antibodies and antibody fragments are widely used in therapeutics and diagnoses. While mammalian cells serve as the host cells for antibody production, insect cells can produce large quantities of secretory antibodies in serum-free suspension cultures. The effects of lithium on the processes of autophagy and apoptosis in mammalian cells are well chronicled. In the present study, stably transformed insect cells, which produce an engineered antibody molecule, were cultured with lithium chloride in a serum-free medium. Treatment with lithium chloride induced autophagy and apoptosis in recombinant insect cells and led to increases in the yields of secreted antibodies.

Escherichia coli surface display for the selection of nanobodies

Nanobodies (Nbs) are the smallest functional antibody fragments known in nature and have multiple applications in biomedicine or environmental monitoring. Nbs are derived from the variable segment of camelid heavy chain-only antibodies, known as VHH. For selection, libraries of VHH gene segments from naïve, immunized animals or of synthetic origin have been traditionally cloned in E. coli phage display or yeast display systems, and clones binding the target antigen recovered, usually from plastic surfaces with the immobilized antigen (phage display) or using fluorescence-activated cell sorting (FACS; yeast display). This review briefly describes these conventional approaches and focuses on the distinct properties of an E. coli display system developed in our laboratory, which combines the benefits of both phage display and yeast display systems. We demonstrate that E. coli display using an N-terminal domain of intimin is an effective platform for the surface display of VHH libraries enabling selection of high-affinity Nbs by magnetic cell sorting and direct selection on live mammalian cells displaying the target antigen on their surface. Flow cytometry analysis of E. coli bacteria displaying the Nbs on their surface allows monitoring of the selection process, facilitates screening, characterization of antigen-binding clones, specificity, ligand competition and estimation of the equilibrium dissociation constant (KD ).

Osmotic conditions could promote scFv antibody production in the Escherichia coli HB2151

Introduction: Single chain variable fragment (scFv) antibodies are reduced forms of the whole antibodies that could be regarded as an alternative tool for diagnostic and therapeutic purposes. The optimization of processes and environmental conditions is necessary to increase the production yields and enhance the productivity. This can result in a cost-effective process and respond to the high demand for these antibodies. Methods: In this research, physical and chemical factors influencing the batch fermentation was investigated in 50 mL batch tubes using minimum media to find the optimum conditions for production of a single chain variable fragment antibody in the Escherichia coli HB2151. Experimental designs were used to screen the effective parameters and to optimize the main factors. Results: Arabinose was used instead of IPTG as a cheaper and nontoxic inducer and its optimum concentration was determined 0.1% (w/w). Induction duration time and filling volume fraction were set on the relatively better states 24 hours and 1/10 respectively. Regarding our previous study, stationary phase of the cell growth was selected as induction start time that showed higher specific scFv production yields (YP/X) in the minimum media. Finally, a statistical experimental design was extended to a central composite design (CCD) and analysis was performed based on sucrose and sorbitol concentrations producing osmotic condition for induction. The optimum region in the contour plot for the periplasmic scFv production was an osmotic circle area with total sugar molarity 0.8 to 0.9. Conclusion: Sugars such as sucrose and sorbitol producing osmotic conditions could lead to periplasmic scFv concentrations up to 2.85 mg/L of culture media improving scFv concentration near to five times of the average of the screening step (0.59 mg/L).

Efficient Antibody Assembly in E. coli Periplasm by Disulfide Bond Folding Factor Co-expression and Culture Optimization

Molecular chaperones and protein folding factors of bacterial periplasmic space play important roles in assisting disulfide bond formation and proper protein folding. In this study, effects of disulfide bond protein (Dsb) families were investigated on assembly of 3F3 Fab, an antibody inhibitor targeting matrix metalloproteinase-14 (MMP-14). By optimizing DsbA/C co-expression, promoter for 3F3 Fab, host strains, and culture media and conditions, a high yield of 30-mg purified 3F3 Fab per liter culture was achieved. Produced 3F3 Fab exhibited binding affinity of 34 nM and inhibition potency of 970 nM. This established method of DsbA/C co-expression can be applied to produce other important disulfide bond-dependent recombinant proteins in E. coli periplasm.

Thermal stabilization of anti-α-cobratoxin single domain antibodies

There is an unmet need for snake antivenoms that can be stored ready to use near the point of care. To address that need we have taken two anti-α-cobratoxin single domain antibodies and increased their thermal stability to improve their ambient temperature shelf-life. The anti-α-cobratoxin single domain antibodies C2 and C20 were first isolated, and demonstrated to be toxin neutralizing by Richard et al., 2013 (Richard, G., Meyers, A.J., McLean, M.D., Arbabi-Ghahroudi, M., MacKenzie, R., Hall, J.C., 2013. In vivo neutralization of alpha-cobratoxin with high-affinity llama single-domain antibodies (VHHs) and a VHH-Fc antibody. PLoS One 8, e69495). To thermal stabilize C2 and C20, we first made changes to their frame work 1 region that we had previously identified to be stabilizing, as well as reverted to the hallmark amino acids highly conserved in VHH domains; these changes improved their melting temperature (Tm) by 2 and 6 °C respectively. The further addition of a non-canonical disulfide bond raised the Tm an additional 13 and 9 °C respectively; giving final Tm values of 86 and 75 °C. Testing these mutants at 1 mg/mL at a range of elevated temperatures for an hour; we found that at 65 °C the wild type C2 and C20 had lost 35 and 95% of their binding activity respectively, while the mutants with the added disulfide bond retained nearly 100% of their initial binding activity. While significant work remains to formulate and field a shelf-stable antivenom, our results indicate such a product should be attainable in the near future.

Display of single-chain variable fragments on bacteriophage MS2 virus-like particles

Background

Virus-like particles (VLPs) of the RNA bacteriophage MS2 have many potential applications in biotechnology. MS2 VLPs provide a platform for peptide display and affinity selection (i.e. biopanning). They are also under investigation as vehicles for targeted drug delivery, using display of receptor-specific peptides or nucleic acid aptamers to direct their binding to specific cell-surface receptors. However, there are few molecules more suited to the precise targeting and binding of a cellular receptor than antibodies.

Results

Here we describe a strategy for display of four different functional single-chain variable fragments (scFvs) on the surface of the MS2 VLP. Each scFv is validated both for its presence on the surface of the VLP and for its ability to bind its cognate antigen.

Conclusions

This work demonstrates the suitability of the MS2 VLP platform to display genetically fused scFvs, allowing for many potential applications of these VLPs and paving the way for future work with libraries of scFvs displayed in a similar manner on the VLP surface. These libraries can then be biopanned and novel scFv binders to targets can be readily discovered.

A Generic Protocol for Purifying Disulfide-Bonded Domains and Random Protein Fragments Using Fusion Proteins with SUMO3 and Cleavage by SenP2 Protease

Recombinant expression of heterologous proteins in E. coli is well established for a wide range of proteins, although in many cases, purifying soluble and properly folded proteins remains challenging (Sorensen and Mortensen, J Biotechnol 115:113-128, 2005; Correa and Oppezzo, Methods Mol Biol 1258:27-44, 2015). Proteins that contain disulfide bonds (e.g., cytokines, growth factors) are often particularly difficult to purify in soluble form and still need optimizing of protocols in almost every step of the process (Berkmen, Protein Expr Purif 82:240-251, 2012; de Marco, Microb Cell Fact 11:129, 2012). Expression of disulfide bonded proteins in the periplasm of E. coli is one approach that can help to obtain soluble protein with the correct disulfide bridges forming in the periplasm. This offers the appropriate conditions for disulfide formation although periplasmic expression can also result in low expression levels and incorrect folding of the target protein (Schlapschy and Skerra, Methods Mol Biol 705:211-224, 2011). Generation of specific antibodies often requires a specific antigenic sequence of a protein in order to get an efficient immune response and minimize cross-reactivity of antibodies. Larger proteins like GST (Glutathione-S-transferase) or MBP (maltose binding protein) as solubilizing fusion partners are frequently used to keep antigens soluble and immunize animals. This approach has the disadvantage that the immune response against the fusion partner leads to additional antibodies that need to be separated from the antigen-specific antibodies. For both classes of proteins mentioned above, a protocol has been developed and optimized using the human version of small ubiquitin-like modifier 3 (SUMO3) protein and its corresponding protease SenP2. This chapter describes the experimental steps for expression, purification, refolding, and cleavage that are applicable to both disulfide-bonded proteins with a defined structure and random protein fragments for antibody generation or larger peptides with defined sequence that are difficult express on their own.

Electrostatic engineering of the interface between heavy and light chains promotes antibody Fab fragment production

Monoclonal antibodies and antibody fragments are used for diverse diagnostic and therapeutic applications. We have investigated the secretory production of Fab fragments from insect cells cotransfected with plasmid vectors carrying heavy- and light-chain genes. In the present study, to promote the formation of the disulfide bond between the heavy and light chains, some positively charged amino acid residues were introduced near the cysteine residue for the disulfide bond at the C-terminus of C_L, while some negatively charged amino acid residues were added near the cysteine residue for the disulfide bond at the C-terminus of C_H1. This electrostatic steering led to an increase in Fab secretions from insect cells.

Improved Fab presentation on phage surface with the use of molecular chaperone coplasmid system

The low presentation efficiency of Fab (fragment antigen binding) fragments during phage display is largely due to the complexity of disulphide bond formation. This can result in the presentation of Fab fragments devoid of a light chain during phage display. Here we propose the use of a coplasmid system encoding several molecular chaperones (DsbA, DsbC, FkpA, and SurA) to improve Fab packaging. A comparison was done using the Fab fragment from IgG and IgD. We found that the use of the coplasmid during phage packaging was able to improve the presentation efficiency of the Fab fragment on phage surfaces. A modified version of panning using the coplasmid system was evaluated and was successful at enriching Fab binders. Therefore, the coplasmid system would be an attractive alternative for improved Fab presentation for phage display.

Engineering of protein folding and secretion-strategies to overcome bottlenecks for efficient production of recombinant proteins

SIGNIFICANCE

Recombinant protein production has developed into a huge market with enormous positive implications for human health and for the future direction of a biobased economy. Limitations in the economic and technical feasibility of production processes are often related to bottlenecks of in vivo protein folding.

RECENT ADVANCES

Based on cell biological knowledge, some major bottlenecks have been overcome by the overexpression of molecular chaperones and other folding related proteins, or by the deletion of deleterious pathways that may lead to misfolding, mistargeting, or degradation.

CRITICAL ISSUES

While important success could be achieved by this strategy, the list of reported unsuccessful cases is disappointingly long and obviously dependent on the recombinant protein to be produced. Singular engineering of protein folding steps may not lead to desired results if the pathway suffers from several limitations. In particular, the connection between folding quality control and proteolytic degradation needs further attention.

FUTURE DIRECTIONS

Based on recent understanding that multiple steps in the folding and secretion pathways limit productivity, synergistic combinations of the cell engineering approaches mentioned earlier need to be explored. In addition, systems biology-based whole cell analysis that also takes energy and redox metabolism into consideration will broaden the knowledge base for future rational engineering strategies.

Chaperone-mediated native folding of a β-scorpion toxin in the periplasm of Escherichia coli

Background

Animal neurotoxin peptides are valuable probes for investigating ion channel structure/function relationships and represent lead compounds for novel therapeutics and insecticides. However, misfolding and aggregation are common outcomes when toxins containing multiple disulfides are expressed in bacteria.

Methods

The β-scorpion peptide toxin Bj-xtrIT from Hottentotta judaica and four chaperone enzymes (DsbA, DsbC, SurA and FkpA) were co-secreted into the oxidizing environment of the Escherichia coli periplasm. Expressed Bj-xtrIT was purified and analyzed by HPLC and FPLC chromatography. Its thermostability was assessed using synchrotron radiation circular dichroism spectroscopy and its crystal structure was determined.

Results

Western blot analysis showed that robust expression was only achieved when cells co-expressed the chaperones. The purified samples were homogenous and monodisperse and the protein was thermostable. The crystal structure of the recombinant toxin confirmed that it adopts the native disulfide connectivity and fold.

Conclusions

The chaperones enabled correct folding of the four-disulfide-bridged Bj-xtrIT toxin. There was no apparent sub-population of misfolded Bj-xtrIT, which attests to the effectiveness of this expression method.

General significance

We report the first example of a disulfide-linked scorpion toxin natively folded during bacterial expression. This method eliminates downstream processing steps such as oxidative refolding or cleavage of a fusion-carrier and therefore enables efficient production of insecticidal Bj-xtrIT. Periplasmic chaperone activity may produce native folding of other extensively disulfide-reticulated proteins including animal neurotoxins. This work is therefore relevant to venomics and studies of a wide range of channels and receptors.

•

Novel method for producing natively folded disulfide linked toxins

•

Co-expression in periplasmic space with chaperones

•

Crystal structure has the same structure/disulfide links as toxin from natural source.

•

Synchrotron radiation circular dichroism spectroscopy shows thermal stability.

•

Potential uses in studies of channel and receptor structure/function relationships

How to achieve high-level expression of microbial enzymes: strategies and perspectives

Microbial enzymes have been used in a large number of fields, such as chemical, agricultural and biopharmaceutical industries. The enzyme production rate and yield are the main factors to consider when choosing the appropriate expression system for the production of recombinant proteins. Recombinant enzymes have been expressed in bacteria (e.g., Escherichia coli, Bacillus and lactic acid bacteria), filamentous fungi (e.g., Aspergillus) and yeasts (e.g., Pichia pastoris). The favorable and very advantageous characteristics of these species have resulted in an increasing number of biotechnological applications. Bacterial hosts (e.g., E. coli) can be used to quickly and easily overexpress recombinant enzymes; however, bacterial systems cannot express very large proteins and proteins that require post-translational modifications. The main bacterial expression hosts, with the exception of lactic acid bacteria and filamentous fungi, can produce several toxins which are not compatible with the expression of recombinant enzymes in food and drugs. However, due to the multiplicity of the physiological impacts arising from high-level expression of genes encoding the enzymes and expression hosts, the goal of overproduction can hardly be achieved, and therefore, the yield of recombinant enzymes is limited. In this review, the recent strategies used for the high-level expression of microbial enzymes in the hosts mentioned above are summarized and the prospects are also discussed. We hope this review will contribute to the development of the enzyme-related research field.

Antigen generation and display in therapeutic antibody drug discovery -- a neglected but critical player

Disease intervention by targeting a critical pathway molecule through a blocking antibody or interference by therapeutic proteins is currently en vogue. Generation of blocking antibodies or therapeutic proteins inevitably requires the production of recombinant proteins or cell-based immunogens. Thus, one could call the antigen molecule the neglected player in antibody drug discovery. The variety of methods available for making recombinant proteins or recombinant cell lines that present the target on the cell surface is extensive. These need to be addressed in conjunction with biochemical and biophysical quality criteria and the experimental application intended. Fundamentally, successful production and isolation of monoclonal antibodies requires optimized antigen preparation and presentation to the immune host. This review summarizes the most important aspects of antigen generation and display, enabling logical decision making to give rise to potent high-affinity antibodies.

Production of single chain fragment variable (scFv) antibodies in Escherichia coli using the LEX™ bioreactor

For proteome research, antibodies against a growing number of antigens must be generated and characterized. The high throughput generation of antibody fragments, using in vitro selection, requires bacterial expression of antibody fragments. This created a need to establish an expression method to improve the parallel production of many antibody fragments. In this study, we describe the development of a high throughput bacterial production method for single chain fragment variables (scFvs) using shaking flasks or the LEX™ bioreactor. We compared the influence of a set of production parameters on Escherichia coli production of four different scFv. The results led to an optimized protocol for the parallel production of multiple antibody fragments.