Catalytic Applications for Gold Nanotechnology

Evaluation of Au/γ-Al2O3 nanocatalyst for plasma-catalytic decomposition of toluene

The emission of toluene into the atmosphere can seriously affect the environmental quality and endanger human health. A dielectric barrier discharge reactor filled with a small amount of Au nanocatalysts was used to decompose toluene in He and O₂ gases mixtures at room temperature and atmospheric pressure. Normally, the oxidation of toluene using Au nanocatalysts suffers from low reaction activity and facile catalyst deactivation. Herein, the effects of Au loading, calcination time and calcination temperature were systematically investigated. It was found that 0.1 wt%Au/γ-Al₂O₃ calcined at 300 °C for 5 h can keep an average size around 6 nm with good dispersion on γ-Al₂O₃ surface and display the best catalytic performance. Moreover, the influences of energy density, gas flow rate, toluene concentration and O₂ concentration on toluene degradation using 0.1 wt%Au/γ-Al₂O₃ were evaluated. It showed the best catalytic performance of near 100% conversion for toluene degradation under the reaction conditions of the energy density was 20 J/L, the gas flow rate was 300 mL/min, the concentration of toluene was 376 mg/m³ and the oxygen content was 10%. Combining experimental results and theoretical calculations, the values of reaction constant k were 8.6 × 10^-5, 3.53 × 10^-5 and 3.09 × 10^-5 m⁶/(mol*J), when O₂ concentration, power or flow rate changed, respectively. Therefore, O₂ concentration has the greatest effect on toluene decomposition compared to other factors in the presence of Au/γ-Al₂O₃.

Supported Gold Nanoparticles as Catalysts for the Oxidation of Alcohols and Alkanes

Supporting gold nanoparticles have shown to be extremely active for many industrially important reactions, including oxidations. Two representative examples are the oxidation of alcohols and alkanes, that are substrates of industrial interest, but whose oxidation is still challenging. This review deals with these reactions, giving an insight of the first studies performed by gold based catalysts in these reactions and the most recent developments in the field.

Synthesis by successive ionic layer deposition (SILD) methodology and characterization of gold nanoclusters on the surface of tin and indium oxide films

The ability of successive ionic layer deposition (SILD) technology to synthesize gold clusters on the surface of tin(IV) oxide and indium(III) oxide films is discussed. It was shown that during the process, concentration of active sites that are capable of absorbing gold ions, and the size of the gold particles thus formed, may be controlled by both concentration of the solutions used and the number of SILD cycles. Thus, SILD methodology, employing separate and multiple stages of adsorption and reduction of adsorbed species, has considerable potential for customizing the properties of the deposited metal nanoparticles. In particular, it is shown that during the deposition of gold nanoparticles on the surface of tin(IV) oxide and indium(III) oxide films by SILD methodology, conditions can be realized under which the size of gold nanoclusters may be controllably varied between 1–3 nm and 50 nm. A model is proposed for the formation of gold clusters during the SILD process.

Synthesis of stable ligand-free gold-palladium nanoparticles using a simple excess anion method

We report a convenient excess anion modification and post-reduction step to the impregnation method which permits the reproducible preparation of supported bimetallic AuPd nanoparticles having a tight particle size distribution comparable to that found for sol-immobilization materials but without the complication of ligands adsorbed on the particle surface. The advantageous features of the modified impregnation materials compared to those made by conventional impregnation include a smaller average particle size, an optimized random alloy composition, and improved compositional uniformity from particle-to-particle resulting in higher activity and stability compared to the catalysts prepared using both conventional impregnation and sol immobilization methods. Detailed STEM combined with EDX analyses of individual particles have revealed that an increase in anion concentration increases the gold content of individual particles in the resultant catalyst, thus providing a method to control/tune the composition of the nanoalloy particles. The improved activity and stability characteristics of these new catalysts are demonstrated using (i) the direct synthesis of hydrogen peroxide and (ii) the solvent-free aerobic oxidation of benzyl alcohol as case studies.