Alginate Hydrogels: A Tool for 3D Cell Encapsulation, Tissue Engineering, and Biofabrication

Engineering alginate/carboxymethylcellulose scaffolds to establish liver cancer spheroids: Evaluation of molecular variances between 2D and 3D models

Natural polymeric hydrogels represent an optimal framework for 3D culture development. This study demonstrates a freeze-thaw-based ionic crosslinking technique for fabricating alginate/carboxymethylcellulose scaffold for culturing human hepatocellular carcinoma, Huh-7 cells to generate 3D spheroids. Consolidating morphological and biomechanical characterization of Alg/CMC scaffolds shows the formation of uniform hydrogels with significant crosslinking (ATR-FTIR), multiscale pores (FE-SEM), swelling/water absorbance, softer texture, viscoelasticity (rheology), spreading nature (contact angle), and degradation rate optimal for 3D culture establishment. The influence of cell seeding density and time with spheroid formation reveals a maximal size of 250-300 μm on day 7. Calcein AM and Propidium iodide staining confirm that a culmination of viable and dead cells generates spheroidal heterogeneity. RT-qPCR in 3D culture against RPL-13 and 2D culture controls indicate an upregulation of E-cadherin, N-cadherin, fibronectin, and integrin α9/β6. Further, western blotting and immunofluorescence confirm the collective display of cellular interactions in 3D spheroids. Thus, the expression profile signifies the role of key genes during the assembly and formation of 3D spheroids in 1%Alg/1%CMC scaffolds with a profound epithelial characteristic. In the future, this study will bring a 3D spheroid model in a platter for elucidating epithelial to mesenchymal transition of cells during in vitro disease modeling.

Self-healing hydrogels for bone defect repair

Severe bone defects can be caused by various factors, such as tumor resection, severe trauma, and infection. However, bone regeneration capacity is limited up to a critical-size defect, and further intervention is required. Currently, the most common clinical method to repair bone defects is bone grafting, where autografts are the "gold standard." However, the disadvantages of autografts, including inflammation, secondary trauma and chronic disease, limit their application. Bone tissue engineering (BTE) is an attractive strategy for repairing bone defects and has been widely researched. In particular, hydrogels with a three-dimensional network can be used as scaffolds for BTE owing to their hydrophilicity, biocompatibility, and large porosity. Self-healing hydrogels respond rapidly, autonomously, and repeatedly to induced damage and can maintain their original properties (i.e., mechanical properties, fluidity, and biocompatibility) following self-healing. This review focuses on self-healing hydrogels and their applications in bone defect repair. Moreover, we discussed the recent progress in this research field. Despite the significant existing research achievements, there are still challenges that need to be addressed to promote clinical research of self-healing hydrogels in bone defect repair and increase the market penetration.

Microencapsulation of Probiotic Streptococcus salivarius LAB813

Probiotics are living microorganisms that confer a health benefit on the host when administered in adequate amounts. Streptococcus salivarius, a commensal bacterium found in the oral cavity, has been shown to secrete antimicrobial peptides and can be used as probiotics. This study aimed to develop a delivery system for the probiotic LAB813, a novel S. salivarius strain first identified in the laboratory. Probiotics can be delivered and protected through the encapsulation of biomaterials such as polysaccharides. Their biocompatibility, biodegradability, user-friendliness, and ease of access make polysaccharides useful for encapsulating probiotics. Alginate (Alg) and chitosan (Ch) are naturally obtained polysaccharides and, hence, tested for LAB813 encapsulation. An extrusion method of encapsulation was performed to form Alg microcapsules (Alg-LAB813), some of which were coated with Ch (Alg-LAB813-Ch) to provide dual-layered protection. Inhibitory assays of the Alg-LAB813 and Alg-LAB813-Ch microcapsules were assayed against an indicator strain. Alg-LAB813-Ch microcapsules showed superior antibacterial properties compared to Alg-LAB813 microcapsules over 24 h and when subject to temperatures ranging from 4 to 68 °C. In addition, Alg-LAB813-Ch microcapsules retained antibacterial activity for up to 28 days of storage at 4 °C. The strong and sustained inhibitory activities of Ch-coated Alg encapsulated LAB813 signify the potential for their use to improve oral health.

Advances in polymer-based cell encapsulation and its applications in tissue repair

Cell microencapsulation is a more widely accepted area of biological encapsulation. In most cases, it involves fixing cells in polymer scaffolds or semi-permeable hydrogel capsules, providing the environment for protecting cells, allowing the exchange of nutrients and oxygen, and protecting cells against the attack of the host immune system by preventing the entry of antibodies and cytotoxic immune cells. Hydrogel encapsulation provides a three-dimensional (3D) environment similar to that experienced in vivo, so it can maintain normal cellular functions to produce tissues similar to those in vivo. Embedded cells can be genetically modified to release specific therapeutic products directly at the target site, thereby eliminating the side effects of systemic treatments. Cellular microcarriers need to meet many extremely high standards regarding their biocompatibility, cytocompatibility, immunoseparation capacity, transport, mechanical, and chemical properties. In this article, we discuss the biopolymer gels used in tissue engineering applications and the brief introduction of cell encapsulation for therapeutic protein production. Also, we review polymer biomaterials and methods for preparing cell microcarriers for biomedical applications. At the same time, in order to improve the application performance of cell microcarriers in vivo, we also summarize the main limitations and improvement strategies of cell encapsulation. Finally, the main applications of polymer cell microcarriers in regenerative medicine are summarized.

Bioink Formulation and Machine Learning-Empowered Bioprinting Optimization

Bioprinting enables the fabrication of complex, heterogeneous tissues through robotically-controlled placement of cells and biomaterials. It has been rapidly developing into a powerful and versatile tool for tissue engineering. Recent advances in bioprinting modalities and biofabrication strategies as well as new materials and chemistries have led to improved mimicry and development of physiologically relevant tissue architectures constituted with multiple cell types and heterogeneous spatial material properties. Machine learning (ML) has been applied to accelerate these processes. It is a new paradigm for bioprinting. In this review, we explore current trends in bioink formulation and how ML has been used to accelerate optimization and enable real-time error detection as well as to reduce the iterative steps necessary for bioink formulation. We examined how rheometric properties, including shear storage, loss moduli, viscosity, shear-thinning property of biomaterials affect the printability of a bioink. Furthermore, we scrutinized the interplays between yield shear stress and the printability of a bioink. Moreover, we systematically surveyed the application of ML in precision in situ surgical site bioprinting, closed-loop AI printing, and post-printing optimization.

Characteristics of a novel photoinitiator aceanthrenequinone-initiated polymerization and cytocompatibility of its triggered polymer

•

AATQ is a novel photosensitizer with high-photoinitiating conversion efficiency at a relatively low concentration under 455 nm-blue light.

•

Cytotoxicity of AATQ to different tissue types of cells is much lower than widely used-BAPO.

•

Cytocompatibility of AATQ-initiated polymer is significantly superior to PANQ, but inferior to CQ.

•

AATQ offers an alternative in industrial or biomedical areas, especially in the required low concentration of photoinitiators.

A number of photoinitiators are available in chemical industry, but less of them in biomedicine or clinical therapy due to the limitation of their cytotoxicity and biocompatibility. Thus, it is urgently necessary to find non-toxic or low-toxic photoinitiators to meet clinical demands. Aceanthrenequinone (AATQ) is a novel photosensitizer with high-photoinitiating ability, but no reports contribute, to date, to its cytotoxicity and biocompatibility. Here, primary cells and various cell lines were exposed to different concentrations of AATQ with or without irradiation. AATQ had the similar photoinitiating conversion efficiency to the extensively used bis(2,4,6-trimethylbenzoyl)-phenylphosphine oxide (BAPO) and higher one than 9,10-phenanthrenequinone (PANQ) with the similar extent of polymerization in depth within a certain range, but displayed much lower cytotoxicity than BAPO under non-irradiation or irradiation. The biocompatibility of BisGMA/TEGDMA polymer prepared by AATQ was superior to that of PANQ, but inferior to that of camphorquinone (CQ) although the far lower dose of AATQ is enough to initiate polymerization of monomer than that of CQ. Hence, AATQ offers a valuable alternative in applications of industrial or biomedical areas.

3D Printing Polymer-based Bolus Used for Radiotherapy

Bolus is a kind of auxiliary device used in radiotherapy for the treatment of superficial lesions such as skin cancer. It is commonly used to increase skin dose and overcome the skin-sparing effect. Despite the availability of various commercial boluses, there is currently no bolus that can form full contact with irregular surface of patients' skin, and incomplete contact would result in air gaps. The resulting air gaps can reduce the surface radiation dose, leading to a discrepancy between the delivered dose and planned dose. To avoid this limitation, the customized bolus processed by three-dimensional (3D) printing holds tremendous potential for making radiotherapy more efficient than ever before. This review mainly summarized the recent development of polymers used for processing bolus, 3D printing technologies suitable for polymers, and customization of 3D printing bolus. An ideal material for customizing bolus should not only have the feature of 3D printability for customization, but also possess radiotherapy adjuvant performance as well as other multiple compound properties, including tissue equivalence, biocompatibility, antibacterial activity, and antiphlogosis.

Biofabrication of natural hydrogels for cardiac, neural, and bone Tissue engineering Applications

Natural hydrogels are one of the most promising biomaterials for tissue engineering applications, due to their biocompatibility, biodegradability, and extracellular matrix mimicking ability. To surpass the limitations of conventional fabrication techniques and to recapitulate the complex architecture of native tissue structure, natural hydrogels are being constructed using novel biofabrication strategies, such as textile techniques and three-dimensional bioprinting. These innovative techniques play an enormous role in the development of advanced scaffolds for various tissue engineering applications. The progress, advantages, and shortcomings of the emerging biofabrication techniques are highlighted in this review. Additionally, the novel applications of biofabricated natural hydrogels in cardiac, neural, and bone tissue engineering are discussed as well.

Tissue-Engineering of Human Intervertebral Disc: A Concise Review

Intervertebral disc (IVD) represents a structure of crucial structural and functional importance for human spine. Pathology of IVD institutes a frequently encountered condition in current clinical practice. Degenerative Disc Disease (DDD), the principal clinical representative of IVD pathology, constitutes an increasingly diagnosed spinal disorder associated with substantial morbidity and mortality in recent years. Despite the considerable incidence and socioeconomic burden of DDD, existing treatment modalities including conservative and surgical methods have been demonstrated to provide a limited therapeutic effect, being not capable of interrupting or reversing natural progress of underlying disease. These limitations underline the requirement for development of novel, innovative and more effective therapeutic strategies for DDD management. Within this literature framework, compromised IVD replacement with a viable IVD construct manufactured with Tissue-Engineering (TE) methods has been recommended as a promising therapeutic strategy for DDD. Existing preliminary preclinical data demonstrate that proper combination of cells from various sources, different scaffold materials and appropriate signaling molecules renders manufacturing of whole-IVD tissue-engineered constructs a technically feasible process. Aim of this narrative review is to critically summarize current published evidence regarding particular aspects of IVD-TE, primarily emphasizing in providing researchers in this field with practicable knowledge in order to enhance clinical translatability of their research and informing clinical practitioners about the features and capabilities of innovative TE science in the field of IVD-TE.

Polymeric hydrogel as a vitreous substitute: current research, challenges, and future directions

Vitreoretinal surgery is an essential approach to treat proliferative diabetic vitreopathy, retinal detachment, retinal tear, ocular trauma, and macular holes. The removal of the natural vitreous and the replacement with substitutes are critical steps for retina reattachment. Vitreous substitutes including silicone oil (SiO), air, sulfur hexafluoride (SF₆), and perfluoropropane (C₃F₈), have been widely applied in clinical practice. However, these substitutes are reported to cause complications such as emulsification, high intraocular pressure, and lens opacification. Polymeric hydrogels are a kind of material with favorable physical, mechanical properties, and adaptable biocompatibility, thus being highly expected to be ideal vitreous substitutes. Despite years of research, very few polymeric hydrogels can be applied practically in the vitreous cavity. In this review, we focus on the development of polymeric natural-based hydrogels and synthetic hydrogels. Particularly, we pay attention to recent advances in the novel stimuli-response and self-assembly supramolecular hydrogels. Characterized by easy injectability and long residence time, this kind of hydrogel becomes the potentially promising candidates for ideal vitreous substitutes. Finally, we evaluate the current challenges and provide the future directions of vitreous substitutes.