Intergeneric hybridization between Pleurotus ostreatus and Schizophyllum commune by PEG-induced protoplast fusion

Interspecies hybridization between Auricularia cornea cv. Yu Muer and Auricularia heimuer cv. Bai Muer through protoplast fusion

Color variations in cultivated edible mushrooms present novel and potentially valuable alternatives to the research and cultivation industries. We collected, identified, and domesticated a white strain of Auricularia cornea and a white strain of Auricularia heimuer from China. However, due to an unstable phenotype and stricter requirements on environment and management technology, the production and utilization of Auricularia heimuer cv. Bai Muer make slow progress. Outcrossing is an essential means to broaden the intraspecific genetic resources to expand the gene pool and compensate for the limitations of related species hybridization. In this study, interspecies hybridization between Auricularia cornea cv. Yu Muer and Auricularia heimuer cv. Bai Muer was conducted using polyethylene glycol (PEG)-induced double-inactivated protoplast fusion. Apart from the functional complementation of double-inactivated protoplasts, the hybrids were characterized by colony morphology, antagonistic test, primordial morphology, and polymerase chain reaction (PCR) fingerprinting. The results suggested that the hybrids and their parents showed significant differences in their colony morphology. Moreover, positive barrage reactions were observed between each parent and hybrid. Inter-simple sequence repeat (ISSR) and start codon targeted (SCoT) profile analysis of fusants and parents depicted that fusants contained polymorphic bands, which indicated the rearrangement and deletion of deoxyribonucleic acid (DNA) in the fusants. Yellowish-white primordia were obtained from two hybrids. Protoplast fusion may reinforce the genetic potential and provide an ideal alternative for breeding albino Auricularia.

Interspecific hybridization between Ganoderma lingzhi and G. applanatum through protoplast fusion

Interspecific hybridization between Ganoderma lingzhi and G. applanatum was attempted through polyethylene glycol (PEG) induced fusion technique. The protoplast isolation procedure was simplified, and we obtained a significant number of protoplasts from both Ganoderma species. The number of protoplasts obtained was 5.27 ± 0.31 × 10⁷/mL in G. lingzhi and 5.57 ± 0.49 × 10⁶/mL in G. applanatum. Osmotic stabilizer NaCl (0.4 M) at pH 5.8 and enzymolysis time 3.5 h have supported high frequency of protoplast regeneration. G. lingzhi and G. applanatum regeneration frequency was 1.73 ± 0.04% and 0.23 ± 0.02%, respectively. 40% of PEG induced high number of protoplast fusion the regeneration frequency was 0.09% on a minimal medium. Two hundred fifty-two fusant colonies were isolated from the following four individual experiments. Among them, ten fusants showed the mycelial morphological difference compared to their parents and other fusant isolates. The fruiting body could be generated on oak sawdust and wheat bran substrate, and a few of them showed recombined morphology of the parental strains. The highest yield and biological efficacy (BE) were recorded in GF248, while least in GF244. The hybridity of the fusant was established based on mycelia, fruiting morphology, and PCR fingerprinting. ISSR and RAPD profile analysis of ten fusants and parents depicted that fusants contained polymorphic bands, which specified the rearrangement and deletion of DNA in the fusants. A Dendrogram was constructed based on the RAPD profile, and the clustering data exhibited two major clusters: cluster I included the G. lingzhi and Cluster II, including the G. applanatum and fusant lines. Total polysaccharide (α, β and total glucan) content was compared with fusants and parental strains. The present study highlighted the efficient methods for protoplast isolation from Ganoderma species. PEG-induced fusants showed high polymorphic frequency index, while the phenotypic characters showed high similarity to G. applanatum. A significant difference was observed in the mushroom yield and its total polysaccharide between the fusants and parental strains.

Interspecific hybridization between cultivated morels Morchella importuna and Morchella sextelata by PEG-induced double inactivated protoplast fusion

The commercial production of Morchella mushrooms calls for urgent breeding of excellent varieties or strains with appropriate tools, such as protoplast fusion. However, the protoplast fusion in morels has not been studied. In this paper, interspecific hybridization between cultivated morels of M. importuna and M. sextelata by PEG-induced protoplast fusion was conducted. Apart from functional complementation of double inactivated protoplasts, the fusants were characterized by cultural and cultivated characters and molecular markers of random amplified polymorphic DNA (RAPD). The results suggested that the hybrids and their parents showed significant difference in their inoculum recovery time, mycelial growth rate, yield of cultivation and total amino acid content of ascocarps. Moreover, positive barrage reactions were observed between parental strains as well as between each parent and a hybrid line. A dendrogram created on the basis of RAPD fingerprints exhibited three major clusters, in which morel hybrids showed intra-cluster variations, M. sextelata #6 formed an out group, while M. importuna #4 was phylogenetically closer to morel hybrids. All the results demonstrated that real fusants were obtained in our study. Protoplast fusion may provide an ideal alternative for new strain selection, and thus will promote the healthy development of morel industry.

Genetic improvement in Pleurotus (oyster mushroom): a review

Pleurotus is an important genus comprising several edible species of great commercial significance. These species are grown all across the world. The production areas of Pleurotus mainly belong to the Asian part and are gaining wide popularity across the globe owing to their promising nutritional gains. The demand for improved strains with high productivity has also been rising. The genetic improvement in Pleurotus started with a simple selection technique, which later utilized hybridization (intraspecific, interspecific and intergeneric) and mutation breeding. The traits such as productivity, sporelessness and quality improvement are important objectives on which most of the works have been done so far. However, new generation approaches such as molecular breeding, genetic transformation and genome editing techniques also added pace to the present improvement process. Hitherto, seven species of Pleurotus have been sequenced and a sizable data has been generated that can be used in further breeding programs. This paper discusses and summarizes various research findings on genetic improvement of Pleurotus and gives an outlook for future breeding programs.

Dendrobium protoplast co-culture promotes phytochemical assemblage in vitro

The present study is intended to analyze the occurrence of potent, low produce, naturally occurring stilbenes in protoplasts of wild species and hybrids of Dendrobium. The wild species selected for the study was Dendrobium ovatum, endemic to Western Ghats of India. Protoplasts were isolated from leaves and tepal tissues of all the species and were cultured purely to generate homofusants and cross-cultured to raise heterofusants. Phytochemical composition of protoplast culture with atypical and pure microcolonies was performed using mass spectrometry. Enzyme cocktail of 4% pectinase together with 2% cellulase displayed the highest competence for protoplast isolations. Maximum protoplast density of 30.11 × 10⁴/ml was obtained from D. ovatum leaves in 2 h. Subcellular features such as the presence of partially formed cell wall, the position of the nucleus, chloroplast density, colony existence, and integrity of the plasma membrane were analyzed. Among the pure and cross-cultured protoplasts, the number of heterofusants and homofusants formed were enumerated. The spectral feature extraction of the mass spectrometry indicated the presence of five phenolic marker compounds, viz., tristin, confusarin, gigantol, moscatilin, and resveratrol, some of them in pure and others in assorted protoplast cultures raised from Dendrobium leaves and tepals. The study demonstrated that protoplast fusion technique enabled phytochemical assemblage in vitro as stilbenes tend to get restricted either in a tissue or species specific manner. This is the first report showing the presence of resveratrol, moscatilin, tristin, gigantol, and confusarin in wild and hybrid species from cultured Dendrobium protoplasts in vitro.

Enhancement of yellow pigment production by intraspecific protoplast fusion of Monascus spp. yellow mutant (ade(-)) and white mutant (prototroph)

To breed industrially useful strains of a slow-growing, yellow pigment producing strain of Monascus sp., protoplasts of Monascus purpureus yellow mutant (ade(-)) and rapid-growing M. purpureus white mutant (prototroph) were fused and fusants were selected on minimal medium (MM). Preliminary conventional protoplast fusion of the two strains was performed and the result showed that only white colonies were detected on MM. It was not able to differentiate the fusants from the white parental prototroph. To solve this problem, the white parental prototroph was thus pretreated with 20mM iodoacetamide (IOA) for cytoplasm inactivation and subsequently taken into protoplast fusion with slow-growing Monascus yellow mutant. Under this development technique, only the fusants, with viable cytoplasm from Monascus yellow mutant (ade(-)), could thus grow on MM, whereas neither IOA pretreated white parental prototroph nor yellow auxotroph (ade(-)) could survive. Fifty-three fusants isolated from yellow colonies obtained through this developed technique were subsequently inoculated on complete medium (MY agar). Fifteen distinguished yellow colonies from their parental yellow mutant were then selected for biochemical, morphological and fermentative properties in cassava starch and soybean flour (SS) broth. Finally, three most stable fusants (F7, F10 and F43) were then selected and compared in rice solid culture. Enhancement of yellow pigment production over the parental yellow auxotroph was found in F7 and F10, while enhanced glucoamylase activity was found in F43. The formation of fusants was further confirmed by monacolin K content, which was intermediate between the two parents (monacolin K-producing yellow auxotroph and non-monacolin K producing white prototroph).

The novel role of fungal intracellular laccase: used to screen hybrids between Hypsizigus marmoreus and Clitocybe maxima by protoplasmic fusion

Laccase has been proved important in decolorization of Remazol Brilliant Blue R (RBBR), oxidation of 2, 2'-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt, lignin degradation and fruiting-body formation. The decolorization of RBBR by laccase was firstly used to screen protoplast fusants. Fusants were obtained by protoplast fusion between the strains of Hypsizigus marmoreus and Clitocybe maxima, and two fusants (IM1 and IIIM5) were screened on PDA medium containing RBBR. These fusants were significant higher in laccase activity than H. marmoreus, nearly 413 and 395 times, respectively. Their hyphal growth rates were also remarkable higher than H. marmoreus, nearly 1.5 and 1.4 times, respectively. Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis showed these fusants contained the laccase, and the molecular mass of the laccase was consistent with the laccase of C. maxima, nearly 62 kDa. The pileus color of the IM1 and IIIM5 also showed partial recombined characteristics comparing to the parental strains, while biological efficiency ratios were prominent higher than that of H. marmoreus, up to 14.58 and 10.87 %, respectively. Randomly amplified polymorphic DNA bands of fusants not only were similar to parental bands, but presented new non-parental bands. Using the Unweighted pair-group method together with mathematic averages method to gain a dendrogram, in which the fusants showed intra-cluster variations. Significantly, H. marmoreus was the dominant parent, while C. maxima were distant from the fusants. The differences among IM1, IIIM5 and H. marmoreus, and the similarities among IM1, IIIM5 and C. maxima indicated IM1 and IIIM5 were somatic hybrids of H. marmoreus and C. maxima. Accordingly, it is feasible to use laccase to screen fusants of H. marmoreus and C. maxima.

Isolation, Regeneration and PEG-Induced Fusion of Protoplasts of Pleurotus pulmonarius and Pleurotus florida

Inter-specific hybridization between Pleurotus pulmonarius and P. florida was attempted through PEG-induced protoplast fusion to select a fusant. The protocol for protoplast release, regeneration and fusion in these two Pleurotus species was standardized using the variables controlling the process. The mixture of mycolytic enzymes, i.e. commercial cellulase, crude chitinase and pectinase, KCl (0.6 M) as osmotic stabilizer, pH 6 of the phosphate buffer and an incubation time of 3 hours resulted in the maximum release of protoplasts from 3-day-old mycelia of P. florida (5.3~5.75 × 10(7) protoplasts/g) and P. pulmonarius (5.6~6 × 10(7) protoplasts/g). The isolated protoplasts of P. florida regenerated mycelium with 3.3% regeneration efficiency while P. pulmonarius showed 4.1% efficiency of regeneration. Polyethyleneglycol (PEG) - induced fusion of protoplasts of these two species resulted in 0.28% fusion frequency. The fusant produced fruiting bodies on paddy straw but required a lower temperature of crop running (24 ± 2℃) than its parents which could fruit at 28 ± 2℃. The stable fusant strain was selected by testing for the selected biochemical markers i.e. Carbendazim tolerance and utilization of the lignin degradation product, vanillin.

Characterization, molecular cloning, and differential expression analysis of laccase genes from the edible mushroom Lentinula edodes

The effect of different substrates and various developmental stages (mycelium growth, primordium appearance, and fruiting-body formation) on laccase production in the edible mushroom Lentinula edodes was studied. The cap of the mature mushroom showed the highest laccase activity, and laccase activity was not stimulated by some well-known laccase inducers or sawdust. For our molecular studies, two genomic DNA sequences, representing allelic variants of the L. edodes lac1 gene, were isolated, and DNA sequence analysis demonstrated that lac1 encodes a putative polypeptide of 526 amino acids which is interrupted by 13 introns. The two allelic genes differ at 95 nucleotides, which results in seven amino acid differences in the encoded protein. The copper-binding domains found in other laccase enzymes are conserved in the L. edodes Lac1 proteins. A fragment of a second laccase gene (lac2) was also isolated, and competitive PCR showed that expression of lac1 and lac2 genes was different under various conditions. Our results suggest that laccases may play a role in the morphogenesis of the mushroom. To our knowledge, this is the first report on the cloning of genes involved in lignocellulose degradation in this economically important edible fungus.