Investigation of cellobiohydrolase from trichoderma reesei by small angle X-ray scattering

Glycosylation effects on the structure and dynamics of a full-length Cel7A cellulase

Fungi cellulases are used to degrade cellulose-containing biomass for bioethanol production. Industrial cellulases such as Cel7A from Trichoderma reesei (TrCel7A) are critical in this process. Thus, the understanding of structure and dynamics is crucial for engineering variants with improved cellulolytic activity. This cellulase consists of two domains connected by a flexible and highly glycosylated linker. However, the linker flexibility has hindered the determination of Cel7A complete structure. Herein, based on atomic and sparse data, we applied integrative modelling to build a model of the complete enzyme structure. Next, through simulations, we studied the glycosylation effects on the structure and dynamics of a solubilized TrCel7A. Essential dynamics analysis showed that O-glycosylation in the linker led to the stabilization of protein overall dynamics. O-linked glycans seem to restrict protein dihedral angles distribution in this region, selecting more elongated conformations. Besides the reduced flexibility, functional interdomain motions occurred in a more concerted way in the glycosylated system. In contrast, in the absence of glycosylation, we observed vast conformational plasticity with the functional domains frequently collapsing. We report here evidence that targeting Cel7A linker flexibility by point mutations including modification of glycosylation sites could be a promising design strategy to improve cellulase activity.

Biophysical and biochemical studies of a major endoglucanase secreted by Xanthomonas campestris pv. campestris

Endoglucanases are the main cellulolytic enzymes secreted by the bacterium Xanthomonas campestris pv. campestris (Xcc). The major endoglucanase exported by this bacterium into an external milieu is an enzyme XccCel5A, which belongs to GH5 family subfamily 1 and is encoded by the gene engXCA. We purified XccCel5A using ammonium sulfate precipitation followed by size exclusion chromatography and identified it by zymogram analysis. Circular dichroism and fluorescence spectroscopy studies showed that XccCel5A is stable in a wide pH range and up to about 55°C and denatures at the higher temperatures. The optimal conditions for enzyme activity were identified as T=45°C and pH=7.0. Under the optimum conditions the catalytic efficiency (kcat/KM) of the enzyme was determined as 5.16×10(4)s(-1)M(-1) using carboxymethylcellulose (CMC) as a substrate. Our SAXS studies revealed extended tadpole-shape molecular assembly, typical for cellulases, and allowed to determine an overall shape of the enzyme and a relative position of the catalytic and cellulose binding domains.

Glycosylation of Cellulases: Engineering Better Enzymes for Biofuels

Cellulose in plant cell walls is the largest reservoir of renewable carbon on Earth. The saccharification of cellulose from plant biomass into soluble sugars can be achieved using fungal and bacterial cellulolytic enzymes, cellulases, and further converted into fuels and chemicals. Most fungal cellulases are both N- and O-glycosylated in their native form, yet the consequences of glycosylation on activity and structure are not fully understood. Studying protein glycosylation is challenging as glycans are extremely heterogeneous, stereochemically complex, and glycosylation is not under direct genetic control. Despite these limitations, many studies have begun to unveil the role of cellulase glycosylation, especially in the industrially relevant cellobiohydrolase from Trichoderma reesei, Cel7A. Glycosylation confers many beneficial properties to cellulases including enhanced activity, thermal and proteolytic stability, and structural stabilization. However, glycosylation must be controlled carefully as such positive effects can be dampened or reversed. Encouragingly, methods for the manipulation of glycan structures have been recently reported that employ genetic tuning of glycan-active enzymes expressed from homogeneous and heterologous fungal hosts. Taken together, these studies have enabled new strategies for the exploitation of protein glycosylation for the production of enhanced cellulases for biofuel production.

The significance of cellulolytic enzymes produced by Trichoderma in opportunistic lifestyle of this fungus

The degradation of native cellulose to glucose monomers is a complex process, which requires the synergistic action of the extracellular enzymes produced by cellulolytic microorganisms. Among fungi, the enzymatic systems that can degrade native cellulose have been extensively studied for species belonging to the genera of Trichoderma. The majority of the cellulolytic enzymes described so far have been examples of Trichoderma reesei, extremely specialized in the efficient degradation of plant cell wall cellulose. Other Trichoderma species, such as T. harzianum, T. koningii, T. longibrachiatum, and T. viride, known for their capacity to produce cellulolytic enzymes, have been isolated from various ecological niches, where they have proved successful in various heterotrophic interactions. As saprotrophs, these species are considered to make a contribution to the degradation of lignocellulosic plant material. Their cellulolytic potential is also used in interactions with plants, especially in plant root colonization. However, the role of cellulolytic enzymes in species forming endophytic associations with plants or in those existing in the substratum for mushroom cultivation remains unknown. The present review discusses the current state of knowledge about cellulolytic enzymes production by Trichoderma species and the encoding genes, as well as the involvement of these proteins in the lifestyle of Trichoderma.

Cellulase linkers are optimized based on domain type and function: insights from sequence analysis, biophysical measurements, and molecular simulation

Cellulase enzymes deconstruct cellulose to glucose, and are often comprised of glycosylated linkers connecting glycoside hydrolases (GHs) to carbohydrate-binding modules (CBMs). Although linker modifications can alter cellulase activity, the functional role of linkers beyond domain connectivity remains unknown. Here we investigate cellulase linkers connecting GH Family 6 or 7 catalytic domains to Family 1 or 2 CBMs, from both bacterial and eukaryotic cellulases to identify conserved characteristics potentially related to function. Sequence analysis suggests that the linker lengths between structured domains are optimized based on the GH domain and CBM type, such that linker length may be important for activity. Longer linkers are observed in eukaryotic GH Family 6 cellulases compared to GH Family 7 cellulases. Bacterial GH Family 6 cellulases are found with structured domains in either N to C terminal order, and similar linker lengths suggest there is no effect of domain order on length. O-glycosylation is uniformly distributed across linkers, suggesting that glycans are required along entire linker lengths for proteolysis protection and, as suggested by simulation, for extension. Sequence comparisons show that proline content for bacterial linkers is more than double that observed in eukaryotic linkers, but with fewer putative O-glycan sites, suggesting alternative methods for extension. Conversely, near linker termini where linkers connect to structured domains, O-glycosylation sites are observed less frequently, whereas glycines are more prevalent, suggesting the need for flexibility to achieve proper domain orientations. Putative N-glycosylation sites are quite rare in cellulase linkers, while an N-P motif, which strongly disfavors the attachment of N-glycans, is commonly observed. These results suggest that linkers exhibit features that are likely tailored for optimal function, despite possessing low sequence identity. This study suggests that cellulase linkers may exhibit function in enzyme action, and highlights the need for additional studies to elucidate cellulase linker functions.

Small angle neutron scattering reveals pH-dependent conformational changes in Trichoderma reesei cellobiohydrolase I: implications for enzymatic activity

Cellobiohydrolase I (Cel7A) of the fungus Trichoderma reesei (now classified as an anamorph of Hypocrea jecorina) hydrolyzes crystalline cellulose to soluble sugars, making it of key interest for producing fermentable sugars from biomass for biofuel production. The activity of the enzyme is pH-dependent, with its highest activity occurring at pH 4-5. To probe the response of the solution structure of Cel7A to changes in pH, we measured small angle neutron scattering of it in a series of solutions having pH values of 7.0, 6.0, 5.3, and 4.2. As the pH decreases from 7.0 to 5.3, the enzyme structure remains well defined, possessing a spatial differentiation between the cellulose binding domain and the catalytic core that only changes subtly. At pH 4.2, the solution conformation of the enzyme changes to a structure that is intermediate between a properly folded enzyme and a denatured, unfolded state, yet the secondary structure of the enzyme is essentially unaltered. The results indicate that at the pH of optimal activity, the catalytic core of the enzyme adopts a structure in which the compact packing typical of a fully folded polypeptide chain is disrupted and suggest that the increased range of structures afforded by this disordered state plays an important role in the increased activity of Cel7A through conformational selection.

The O-glycosylated linker from the Trichoderma reesei Family 7 cellulase is a flexible, disordered protein

Fungi and bacteria secrete glycoprotein cocktails to deconstruct cellulose. Cellulose-degrading enzymes (cellulases) are often modular, with catalytic domains for cellulose hydrolysis and carbohydrate-binding modules connected by linkers rich in serine and threonine with O-glycosylation. Few studies have probed the role that the linker and O-glycans play in catalysis. Since different expression and growth conditions produce different glycosylation patterns that affect enzyme activity, the structure-function relationships that glycosylation imparts to linkers are relevant for understanding cellulase mechanisms. Here, the linker of the Trichoderma reesei Family 7 cellobiohydrolase (Cel7A) is examined by simulation. Our results suggest that the Cel7A linker is an intrinsically disordered protein with and without glycosylation. Contrary to the predominant view, the O-glycosylation does not change the stiffness of the linker, as measured by the relative fluctuations in the end-to-end distance; rather, it provides a 16 Å extension, thus expanding the operating range of Cel7A. We explain observations from previous biochemical experiments in the light of results obtained here, and compare the Cel7A linker with linkers from other cellulases with sequence-based tools to predict disorder. This preliminary screen indicates that linkers from Family 7 enzymes from other genera and other cellulases within T. reesei may not be as disordered, warranting further study.

Adsorption of Trichoderma reesei cellulase on cellulose: experimental data and their analysis by different equations

The adsorption of cellulase from Trichoderma reesei MCG 77 on Avicel was measured at varying cellulase (2-8 g/L) and Avicel (10-200 g/L) concentrations at pH 4.8 and 50 degrees C. Different mathematical equations were derived for the evaluation of the experimental data. The fraction of cellulase protein that can maximally be adsorbed is 0.96, and 1 g Avicel can bind maximally 0.092 g cellulase protein. The Michaelis constant for the adsorption equilibrium [cellulase] + [Avicel] right harpoon over left harpoon [cellulase Avicel] complex is between 2.0 and 2.3 . 10(-5) mol/L. This value is based on the assumption that cellulase has an average molecular weight of 48.000. The apparent molecular weight of Avicel, i.e., that amount in grams that can bind 1 mol cellulase, is 520,000. Under maximum binding the enzyme covers on Avicel a surface of 42 m(2)/g, and the occupied volume is 0.186 cm(3)/g Avicel.

The effect of enzyme concentration on the rate of the hydrolysis of cellulose

The relationship among extent of hydrolysis, reaction time, and enzyme dosage was investigated. For this, Sigmacell 50 and pretreated poplar wood (20 g/L) was hydrolyzed with varying dosages of cellulases from three different sources (5 to 100 FPU/g) for time periods ranging from 2 to 94 h. It was found that the formation of glucose can be described by summation of two parallel first order reactions. The extent of hydrolysis at fixed time increases with increasing enzyme dosage in a hyperbolic function. From the empirical data it is possible to calculate the fractions of easily and difficult hydrolyzable cellulose and the digestability which could maximally be obtained at infinite enzyme loadings. In the system Sigmacell 50 and Celluclast the easily and difficult hydrolyzable components are 43.0 and 57.0%, respectively, and the maximum digestability at 94 h is 82.6%. Poplar wood, steam treated at 200 degrees , 220 degrees , and 240 degrees C, showed with Celluclast at 24 h a maximum digestability (weight percentage of wood degraded to glucose) of 43.9, 64.9, and 68.0%. The relationships derived from experimental data allow one to compare objectively the effectiveness of different cellulase enzymes and different pretreatments.

Changes in the structural properties and rate of hydrolysis of cotton fibers during extended enzymatic hydrolysis

An extended enzymatic hydrolysis of cotton fibers by crude cellulase from Trichoderma pseudokoningii S-38 is described with characterization of both the enzyme changes of activities and cellulose structure. The hydrolysis rates declined drastically during the early stage and then slowly and steadily throughout the whole hydrolysis process the same trend could be seen during the following re-hydrolysis process. Morphological and structural changes to the fibers, such as swelling, frequent surface erosion, and variation in the packing and orientation of microfibrils, were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Observation of X-ray diffraction and IR spectra suggests that the hydrolysis process results in a gradual increase in the relative intensity of the hydrogen bond network, and a gradual decrease in the apparent crystal size of cellulose. The I(alpha) crystal phase was hydrolyzed more easily than was the I(beta) crystal phase. Apart from the inactivation of CBHs activity, changes in the packing and arrangement of microfibrils and the structural heterogeneity of cellulose during hydrolysis could be responsible for the reduction in the rate of reaction, especially in its later stages. The results indicate that the enzymatic hydrolysis of cellulose occurs on the outer layer of the fiber surface and that, following this, the process continues in a sub-layer manner.

The mechanism of cellulase action on cotton fibers: evidence from atomic force microscopy

Two cellulases from Trichoderma reesei--an exoglucanase, CBH I, and an endoglucanase, EG II--alone and in combination were incubated with cotton fibers. The effects of the cellulases on the surfaces of the cotton fibers were examined by atomic force microscopy. At high magnification, the physical effects on the fibers caused by the two types of enzymes were considerably different. Treatment with CBH I resulted in the appearance of distinct pathways or tracks along the length of the macrofibril. Treatment with EG II appeared to cause peeling and smoothing of the fiber surface. In combination, their effect was observed to be greatest when both enzymes were present simultaneously. When fibers smoothed by treatment with EG II were treated subsequently with CBH I, further evidence of path way formation caused by the action of CBH I along the fibers was observed. Incubation with a cellulase from Thermotoga maritima that lacks a cellulose binding domain had no effect on the surface of cotton fibers. These images provide the first physical evidence of differences in the effect of cellulase components action on the surface of cotton fibers and provide evidence for the movement or tracking of CBH I along the fibers. The first AFM image of CBH I molecules are presented.

cDNA cloning of a Trichoderma reesei cellulase and demonstration of endoglucanase activity by expression in yeast

A Trichoderma reesei cDNA encoding a previously unknown protein with a C-terminal cellulose-binding domain was obtained by complementation screening of a T. reesei cDNA library in a sec1 yeast mutant impaired in protein secretion. The T. reesei protein shows amino acid similarity over its entire length to the Agaricus bisporus cellulose-induced protein CEL1 whose function is not known. These two proteins form a new glycosyl hydrolase family, number 61. Expression of the T. reesei cDNA in yeast showed that it encoded a protein with endoglucanase activity and thus the protein was named EGIV and the corresponding gene egl4. Polyclonal antibodies were prepared against EGIV produced in Escherichia coli and detected a 56-kDa protein in the T. reesei culture supernatant. Northern hybridisation revealed that T. reesei egl4 is regulated in the same manner as other cellulase genes of this fungus.

Glycine residues provide flexibility for enzyme active sites

The high resolution refined structures of 23 enzymes were analyzed to determine the properties of amino acids involved in active site regions. These regions were found to be rich in G-X-Y or Y-X-G oligopeptides, where X and Y are polar and non-polar residues, respectively, that are small and with low polarity. Other regions of the enzyme molecules have significantly fewer of these sequences. These features suggest that glycine residues may provide flexibility necessary for enzyme active sites to change conformation, and the G-X-Y or Y-X-G oligopeptides may be a motif for the formation of enzyme active sites.

Dynamic light scattering study of the two-domain structure of Humicola insolens endoglucanase V

Endoglucanase V (EG V) of HUmicola insolens is composed of a catalytic domain and of a cellulose-binding domain linked by a 33 amino acid long peptide rich in Ser, Thr and Pro residues. This work describes the dynamic behavior of the two-domain structure of EG V as revealed by quasi-elastic light scattering experiments. For both the full-length and the isolated catalytic domain, the autocorrelation function is essentially described by a single relaxation mode. The equivalent hydrodynamic radius of the catalytic domain was found to correspond precisely to the dimensions measured from the previously determined three-dimensional structure. The results obtained with the full-length protein allow a description of the two domain structure of EG V similar to that resulting from earlier studies using small angle X-ray scattering on cellulases from Trichoderma reesei. The hydrodynamic dimensions of the entire enzyme can be approximated as an ellipsoid with dimensions of 42 x 133.6 A.

Lupus-derived autoantibodies with dual autoactivity: anti-DNA and anti-Fc. I. Comparison of IgG autoreactivities with single-chain Fv derivatives

Investigations into the intrinsic affinity and reactivity of autoanti-DNA active sites were initiated through the use of purified monoclonal IgG and the synthesis of single-chain Fv derivatives of murine monoclonal anti-DNA autoantibodies BV 04-01 and BV 17-45. Results showed that relative to the respective IgG hybridomas, only the BV 04-01 SCA derivative showed demonstrable reactivity with DNA. The monovalent single-chain derivative of BV 17-45 showed no reactivity with DNA in solution or solid-phase assays, even though the parental IgG had been previously described as high affinity. However, 17-45 displayed reactivity as a bivalent single-chain derivative. In addition, upon concentration, BV 17-45 IgG formed a highly stable, papain-resistant precipitate. Investigations into the nature of the precipitate revealed that BV 17-45 possessed significant, DNA-inhibitable autobinding to its own IgG molecule. BV 04-01 also possessed similar anti-self reactivity. Thus, both monoclonal autoantibodies examined in this study possessed dual binding specificity; anti-DNa and anti-self.

Investigation of the function of mutated cellulose-binding domains of Trichoderma reesei cellobiohydrolase I

The function of the cellulose-binding domain (CBD) of the cellobiohydrolase I of Trichoderma reesei was studied by site-directed mutagenesis of two amino acid residues identified by analyzing the 3D structure of this domain. The mutant enzymes were produced in yeast and tested for binding and activity on crystalline cellulose. Mutagenesis of the tyrosine residue (Y492) located at the tip of the wedge-shaped domain to alanine or aspartate reduced the binding and activity on crystalline cellulose to the level of the core protein lacking the CBD. However, there was no effect on the activity toward small oligosaccharide (4-methylumbelliferyl beta-D-lactoside). The mutation tyrosine to histidine (Y492H) lowered but did not destroy the cellulose binding, suggesting that the interaction of the pyranose ring of the substrate with an aromatic side chain is important. However, the catalytic activity of this mutant on crystalline cellulose was identical to the other two mutants. The mutation P477R on the edge of the other face of the domain reduces both binding and activity of CBHI. These results support the hypothesis that both surfaces of the CBD are involved in the interaction of the binding domain with crystalline cellulose.

The 1,4-beta-D-glucan cellobiohydrolases from Phanerochaete chrysosporium. I. A system of synergistically acting enzymes homologous to Trichoderma reesei

A physico-chemical and structural characterization of three 1,4-beta-D-glucan cellobiohydrolases (EC. 3.2.1.91), isolated from a culture filtrate of the white-rot fungus Phanerochaete chrysosporium, reveals that the cellulolytic enzyme secretion pattern and thus the general degradation strategy for P. chrysosporium is similar to that of Trichoderma reesei. Partial sequence data show that two of the isolated enzymes, i.e., CBHI, pI 3.82 and CBH62, pI 4.85, are homologous with CBHI and EGI from T. reesei; while, the third, i.e., CBH50, pI 4.87, is homologous to T. reesei CBHII. Limited proteolysis with papain cleaved each of the three enzymes into two domains: a core protein which retained full catalytic activity against low molecular weight substrates and a peptide fragment corresponding to the cellulose binding domain, in striking similarity to the structural organization of T. reesei. CBHI and CBH62 have their binding domain located at the C-terminus, whereas in CBH50 it is located at the N-terminus. It is evident that synergistically acting cellobiohydrolases is a general requirement for efficient hydrolysis of crystalline cellulose by cellulolytic fungi.

Cloning and sequence analysis of a cDNA for cellulase (FI-CMCase) from Aspergillus aculeatus

We have cloned and characterized the cDNA coding for a major component of cellulase, endoglucanase (FI-CMCase), produced by Aspergillus aculeatus. The cDNA was isolated from a A. aculeatus cDNA library using synthetic oligonucleotide mixtures that correspond to the internal amino acid sequence of the mature FI-CMCase protein. Nucleotide sequence analysis of the cloned cDNA insert revealed a 711 bp open reading frame that encoded a protein of 237 amino acid residues. The primary structure of FI-CMCase deduced from the nucleotide sequence of cDNA agreed with that found by amino acid sequencing of peptide fragments obtained by digestion with several proteinases and cyanogen bromide cleavage. There may be a signal peptide sequence of 16 amino acid residues at the N-terminus. The molecular mass of the mature protein calculated from the cDNA is 24002 daltons, which compares favorably with molecular mass estimates of purified FI-CMCase obtained from SDS-PAGE (25000 Da). No distinct homology was found between the amino acid sequence of FI-CMCase and known cellulase sequences of other microorganisms. This study is the first example of cDNA cloning of an endoglucanase from the genus Aspergillus.

Three-dimensional structure of cellobiohydrolase II from Trichoderma reesei

The enzymatic degradation of cellulose is an important process, both ecologically and commercially. The three-dimensional structure of a cellulase, the enzymatic core of CBHII from the fungus Trichoderma reesei reveals an alpha-beta protein with a fold similar to but different from the widely occurring barrel topology first observed in triose phosphate isomerase. The active site of CBHII is located at the carboxyl-terminal end of a parallel beta barrel, in an enclosed tunnel through which the cellulose threads. Two aspartic acid residues, located in the center of the tunnel are the probable catalytic residues.

Comparison of the hydrolytic activity and fluorescence of native, guanidine hydrochloride-treated and renatured cellobiohydrolase I from Trichoderma reesei

Guanidine hydrochloride (GdnHCl) is an effective agent for the elution of cellulase protein from unhydrolyzed cellulosic residues, but once eluted the enzyme is inactive. The studies described in this paper examine the effect of GdnHCl on the hydrolytic activity and tryptophan fluorescence of cellobiohydrolase I (CBH I) from Trichoderma reesei. CBH I was found to be completely inactivated by 0.25 M GdnHCl, but higher concentrations of GdnHCl were required to partially unfold this enzyme, as determined from the measurement of a decrease in its tryptophan fluorescence. Binding of CBH I to microcrystalline cellulose was prevented by 4 M GdnHCl, suggesting that a conformational change of CBH I resulted in the loss of substrate binding. Removal of the denaturant from CBH I by dialysis or gel filtration allowed the kinetics of the reactivation of CBH I, after 4 M GdnHCl treatment, to be studied. The fluorescence and specific hydrolytic activity of native and renatured CBH I were comparable. It is concluded, therefore, that GdnHCl may be used to elute cellulase components, such as CBH I, adsorbed on undigested cellulosic substrates since this component can easily be renatured and subsequently reused.

Catalytic and substrate-binding domains of endoglucanase 2 from Bacteroides succinogenes

Endoglucanase 2 (EG2) of the cellulolytic ruminal anaerobe Bacteroides succinogenes is a 118-kilodalton (kDa) enzyme which binds to cellulose and produces cellotetraose as the end product of hydrolysis. The purified enzyme was treated with the protease trypsin in an attempt to isolate peptides which retained the ability to either hydrolyze soluble carboxymethyl cellulose or bind to insoluble cellulose. There was no loss in endoglucanase activity (carboxymethylcellulase) over a period of 2 h following the addition of trypsin. In comparison, there was a greater than eightfold reduction in the binding of carboxymethylcellulase activity to crystalline cellulose. A Lineweaver-Burk plot with amorphous cellulose as the substrate revealed that the trypsin-digested enzyme had an identical Vmax but a 1.9-fold-lower Km in comparison with the intact enzyme. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the trypsin-digested enzyme revealed two major peptides of 43 and 51 kDa (p43 and p51). The 43-kDa peptide was able to bind to both amorphous and crystalline cellulose, whereas p51 did not. Purified p51 had a molar activity toward carboxymethyl cellulose which was identical to that of the intact enzyme, but activity toward both amorphous and crystalline cellulose was reduced approximately twofold. Two high-titer monoclonal antibodies from mice immunized with the intact protein recognized p43 but not p51. The results are consistent with a bifunctional organization of EG2, in which the 118-kDa enzyme is composed of a 51-kDa catalytic domain and a highly antigenic 43-kDa substrate-binding domain. In terms of its domain structure and activity toward cellulose, EG2 is very similar to cellobiohydrolase II of Trichoderma reesei.

Regulatory aspects of cellulase biosynthesis and secretion

The cellulase enzyme system consists of cellobiohydrolase, endoglucanase, and beta-glucosidase and has been extensively studied with respect to its biosynthesis, properties, mode of action, application, and, most recently, secretion mechanisms. A knowledge of the factors governing the biosynthesis and secretion of these enzymes at the molecular level will be useful in maximizing enzyme productivity in extracellular fluid. Among other topics, the regulatory effects of sorbose (a noninducing sugar which is not a product of cellulose hydrolysis) on cellulase synthesis and release are described. Cellulase genes have recently been cloned into a number of microorganisms with a view to understanding the gene structure and expression and to obtaining the enzyme components in pure form. The factors governing biosynthesis and secretion of cellulases in recombinant cells are also discussed. Cellulases are known to be glycoproteins, therefore, the role of O- and N-linked glycosylation on enzyme stability and secretion is also detailed.

A binding-site-deficient, catalytically active, core protein of endoglucanase III from the culture filtrate of Trichoderma reesei

From the culture filtrate of Trichoderma reesei we have isolated a novel endoglucanase (38 kDa) which was shown to be identical to endoglucanase III (E III, 50 kDa), but lacking the first 61 N-terminal amino acids. This core protein, designated E III core, is fully active against soluble substrates, such as carboxymethylcellulose, whereas both activity against and adsorption to microcrystalline cellulose (Avicel) is markedly decreased. Sedimentation velocity experiments revealed that the intact E III enzyme has much higher asymmetry than the E III core protein, suggesting that the N-terminal region split off constitutes a protruding part of the native enzyme. These results lead to the proposal that native E III consists of two functionally separated domains: a catalytically active core and a protruding N-terminal domain which acts in the binding to insoluble cellulose. The N-terminal peptide missing in E III core corresponds to the heavily glycosylated common structural element found also in the N-terminus of cellobiohydrolase II and in the C-termini of cellobiohydrolase I and endoglucanase I. A similar bifunctional organization could thus be the rule for Trichoderma cellulases, endoglucanases as well as cellobiohydrolases.

Studies of the cellulolytic system of Trichoderma reesei QM 9414. Analysis of domain function in two cellobiohydrolases by limited proteolysis

Limited action of papain on the native forms of two cellobiohydrolases (CBH) from Trichoderma reesei (CBH I, 65 kDa, and CBH II, 58 kDa) leads to the isolation of the respective core fragments (56 kDa and 45 kDa) which are fully active on small, soluble substrates, but have a strongly reduced activity (respectively 10% and 50% of the initial value) on microcrystalline cellulose (Avicel). By partial sequencing at the C terminus of the CBH I core and at the N terminus of the CBH II core the papain cleavage sites have been assigned in the primary structures (at about residue 431 and 82 respectively). This limited action of papain on the native enzymes indicates the presence of hinge regions linking the core to these terminal glycopeptides. The latter conserved sequences appear either at the C or N terminus of several cellulolytic enzymes from Trichoderma reesei [Teeri et al. (1987) Gene 51, 43-52]. The specific activities of the intact enzymes and their cores on two forms of insoluble cellulose (crystalline, amorphous) differentiate the CBH I and CBH II in terms of adsorption and catalytic properties. Distinct functions can be attributed to the terminal peptides: for intact CBH II the N-terminal region contributes in the binding onto both cellulose types; the homologous C-terminal peptide in CBH I, however, only affects the interaction with microcrystalline cellulose. It could be inferred that CBH I and its core bind preferentially to crystalline regions. This seems to be corroborated by the results of CBH I/CBH II synergism experiments.

Homologous domains in Trichoderma reesei cellulolytic enzymes: gene sequence and expression of cellobiohydrolase II

Fungal cellobiohydrolases are unique enzymes capable of degrading highly ordered crystalline cellulose. We present here the isolation and complete sequence analysis of the chromosomal and cDNA copies of the structural gene (cbh2) coding for one of the major cellobiohydrolases (CBH II) of Trichoderma reesei. We also present data on expression of the cbh2 gene and show that the transcription start points of the cbh2 gene are heterogeneous and are located 32 to 52 bp downstream from a putative TATA box. The derived CBH II protein sequence is 471 amino acids long and the coding region is interrupted by three short introns. Most of the CBH II protein bears no apparent resemblance to CBH I and endoglucanase I. However, a short region of extensive homology is found in all Trichoderma cellulases characterized so far, suggesting that this region is important for cellulose hydrolysis. The implications of this information with regard to the evolution of fungal cellulase genes and the enzymology of cellulose hydrolysis are discussed.