Anti-metatype antibodies in immunoassays

Application of Anti-Immune Complex Reagents in Small Molecule Analyte Immunoassays

The detection of small molecule analytes (SMAs) is of great significance for food and drug testing, environmental monitoring, and disease diagnosis. However, the performance of commercially available SMA immunoassays is limited by their low sensitivity and specificity due to the competitive format, leaving significant room for improvement. In recent years, the application of noncompetitive immunoassays for the detection of SMAs has become a hot topic, especially with the rapid evolution of antibody development technology. The remarkable development and application of anti-immune complex (anti-IC) reagents targeting antigen-specific antibodies have garnered significant interest from researchers and diagnostic companies, particularly in the field of SMA detection. The discovery and development history of anti-IC antibodies, the advantages and limitations of different anti-IC reagent preparation methods, and the mechanisms of interaction between ICs and anti-IC antibodies are reviewed. A comprehensive overview of the application of anti-IC antibodies in SMAs assay, including pesticide residue detection, mycotoxin detection, and clinical testing, as well as current challenges and potential solutions in noncompetitive immunoassays, is also summarized to provide a reference for the rapid and accurate detection of SMAs.

Structural insights into ternary immunocomplex formation and cross-reactivity: binding of an anti-immunocomplex FabB12 to Fab220-testosterone complex

Anti-immunocomplex (Anti-IC) antibodies have been used in developing noncompetitive immunoassays for detecting small molecule analytics (haptens). These antibodies bind specifically to the primary antibody in complex with hapten. Although several anti-IC antibody-based immunoassays have been developed, structural studies of these systems are very limited. In this study, we determined the crystal structures of anti-testosterone Fab220 in complex with testosterone and the corresponding anti-IC antibody FabB12. The structure of the ternary complex of testosterone, Fab220, and FabB12 was predicted using LightDock and AlphaFold. The ternary complex has a large (~ 1100 Å2) interface between antibodies. The A-ring of the testosterone bound by Fab220 also participates in the binding of the anti-IC antibody. The structural analysis was complemented by native mass spectrometry. The affinities for testosterone (TES) and three cross-reactive steroids [dihydrotestosterone (DHT), androstenedione (A4), and dehydroepiandrosterone sulfate (DHEA-S)] were measured, and ternary complex formation was studied. The results clearly show the ternary complex formation in the solution. Although DHT showed significant cross-reactivity, A4 and DHEA-S exhibited minor cross-reactivity.

Single-step noncompetitive immunocomplex immunoassay for rapid aflatoxin detection

Owing to the high carcinogenicity of aflatoxins, these toxic secondary metabolites pose a severe risk to human and animal health and can have major economic implications. Herein, we report the development of a noncompetitive immunoassay for aflatoxins based on a monoclonal capture antibody and a unique anti-immunocomplex (anti-IC) antibody fragment (scFv) isolated from a synthetic antibody repertoire. The anti-IC scFv recognizes the immunocomplex and enables the development of noncompetitive sandwich-type assays despite the small size of the analyte. The single-step assay developed in this work, with a detection limit of 70 pg mL^-1, could detect aflatoxins within 15 min. The assay was applied to the analysis of spiked food samples, and the results showed that the method could provide a rapid and simple tool for aflatoxin detection. Moreover, the work demonstrates the potential of anti-IC antibodies and non-competitive immunoassays for the analysis of small molecule contaminants.

Noncompetitive phage anti-immunocomplex real-time polymerase chain reaction for sensitive detection of small molecules

Immuno polymerase chain reaction (IPCR) is an analytical technology based on the excellent affinity and specificity of antibodies combined with the powerful signal amplification of polymerase chain reaction (PCR), providing superior sensitivity to classical immunoassays. Here we present a novel type of IPCR termed phage anti-immunocomplex assay real-time PCR (PHAIA-PCR) for the detection of small molecules. Our method utilizes a phage anti-immunocomplex assay (PHAIA) technology in which a short peptide loop displayed on the surface of the M13 bacteriophage binds specifically to the antibody-analyte complex, allowing the noncompetitive detection of small analytes. The phagemid DNA encoding this peptide can be amplified by PCR, and thus, this method eliminates hapten functionalization or bioconjugation of a DNA template while providing improved sensitivity. As a proof of concept, two PHAIA-PCRs were developed for the detection of 3-phenoxybenzoic acid, a major urinary metabolite of some pyrethroid insecticides, and molinate, a herbicide implicated in fish kills. Our results demonstrate that phage DNA can be a versatile material for IPCR development, enabling universal amplification when the common element of the phagemid is targeted or specific amplification when the real time PCR probe is designed to anneal the DNA encoding the peptide. The PHAIA-PCRs proved to be 10-fold more sensitive than conventional PHAIA and significantly faster using magnetic beads for rapid separation of reactants. The assay was validated with both agricultural drain water and human urine samples, showing its robustness for rapid monitoring of human exposure or environmental contamination.

Development of a noncompetitive phage anti-immunocomplex assay for brominated diphenyl ether 47

We present a new application of the noncompetitive phage anti-immunocomplex assay (PHAIA) by converting an existing competitive assay to a versatile noncompetitive sandwich-type format using immunocomplex binding phage-borne peptides to detect the brominated flame retardant, brominated diphenyl ether 47 (BDE 47). Three phage-displayed 9-mer disulfide-constrained peptides that recognize the BDE 47-polyclonal antibody immunocomplex were isolated. The resulting PHAIAs showed variable sensitivities, and the most sensitive peptide had a dose-response curve with an SC(50) (concentration of analyte producing 50% saturation of the signal) of 0.7ng/ml BDE 47 and a linear range of 0.3-2ng/ml, which was nearly identical to the best heterologous competitive format (IC(50) of 1.8ng/ml, linear range of 0.4-8.5/ml). However, the PHAIA was 1400-fold better than homologous competitive assay. The validation of the PHAIA with extracts of house furniture foam as well as human and calf sera spiked with BDE 47 showed overall recovery of 80-113%. The PHAIA was adapted to a dipstick format (limit of detection of 3.0ng/ml), and a blind test with six random extracts of local house furniture foams showed that the results of the PHAIA and dipstick assay were consistent, giving the same positive and negative detection.

Magnetic bead-based phage anti-immunocomplex assay (PHAIA) for the detection of the urinary biomarker 3-phenoxybenzoic acid to assess human exposure to pyrethroid insecticides

Noncompetitive immunoassays are advantageous over competitive assays for the detection of small molecular weight compounds. We recently demonstrated that phage peptide libraries can be an excellent source of immunoreagents that facilitate the development of sandwich-type noncompetitive immunoassays for the detection of small analytes, avoiding the technical challenges of producing anti-immunocomplex antibody. In this work we explore a new format that may help to optimize the performance of the phage anti-immunocomplex assay (PHAIA) technology. As a model system we used a polyclonal antibody to 3-phenoxybenzoic acid (3-PBA) and an anti-immunocomplex phage clone bearing the cyclic peptide CFNGKDWLYC. The assay setup with the biotinylated antibody immobilized onto streptavidin-coated magnetic beads significantly reduced the amount of coating antibody giving identical sensitivity (50% saturation of the signal (SC(50))=0.2-0.4ng/ml) to the best result obtained with direct coating of the antibody on ELISA plates. The bead-based assay tolerated up to 10 and 5% of methanol and urine matrix, respectively. This assay system accurately determined the level of spiked 3-PBA in different urine samples prepared by direct dilution or clean-up with solid-phase extraction after acidic hydrolysis with overall recovery of 80-120%.

Antibody Engineering-Based Approach for Hapten Immunometric Assays with High Sensitivity

The trace characterization of physiologically active substances with low molecular weight (e.g., steroids, catecholamines, prostaglandins, and oligopeptides), which are classified as "haptens", is an important subject in clinical analysis, and competitive immunoassays have conventionally been used for this purpose. However, the subfemtomole-range determination of haptens is very difficult, as the sensitivity of competitive immunoassays is essentially limited by the affinity of the anti-hapten antibodies that barely reaches the range of 10(11) (l/mol) as the affinity constant (K(a)). Although a noncompetitive "immunometric assay" format, the two-site immunometric assay (sandwich immunoassay), enables even subattomole-range measurements of macromolecules such as proteins, this principle can not be directly applied to haptens, as their low molecular mass prohibits simultaneous binding by two antibody molecules. To overcome such limitations, we are required either to create artificial antibodies showing ultrahigh affinity to haptens by protein engineering of antibody molecules ("antibody engineering") or establishment of novel immunometric assay formats applicable to haptens. This review surveys the background and recent approach for subfemtomole-range determination of haptens using novel immunometric assay methods. Our studies for the development of hapten immunometric assays are also described.

Monoclonal antibodies generated against an affinity-labeled immune complex of an anti-bile acid metabolite antibody: an approach to noncompetitive hapten immunoassays based on anti-idiotype or anti-metatype antibodies

Conventional immunoassays for haptens such as steroids and synthetic drugs are dependent on the competitive reaction between an unlabeled antigen (analyte) and a labeled antigen against a limited amount of anti-hapten antibody. Although noncompetitive immunoassay procedures such as two-site immunometric assays offer a much higher sensitivity, direct application of this principle to haptens has been difficult due to their small molecular mass precluding simultaneous binding by two antibody molecules. Here, we have attempted to develop a noncompetitive immunoassay system based on anti-idiotype or anti-metatype antibodies. Ursodeoxycholic acid 7-N-acetylglucosaminide (UDCA 7-NAG), which is a bile acid metabolite (molecular weight, 595.8), was selected as the model hapten. A/J mice were immunized with a monoclonal antibody against UDCA 7-NAG, which had been affinity-labeled with a relevant hapten derivative. The fusion between the immune spleen cells and P3/NS1/1-Ag4-1 myeloma cells yielded four kinds of alpha-type and two kinds of beta-type monoclonal anti-idiotype antibodies, each recognizing the framework region and paratope of the anti-hapten antibody. The use of a selected combination between alpha-type and beta-type antibodies together with the anti-hapten antibody provided a noncompetitive assay system with a subfemtomole order sensitivity (detection limit, 118 amol) and a practical specificity.

Kinetics and intracellular pathways required for major histocompatibility complex II-peptide loading and surface expression of a fluorescent hapten-protein conjugate in murine macrophage

A fluorescent antigen, FITC10BSA, that is sensitive to several of the biochemical processes involved in antigen processing was constructed. In combination with both flow cytometry and subcellular fractionation, the unique probe provided new details regarding the kinetics and intracellular pathways involved in antigen processing in murine macrophage. These studies suggested that macrophage utilized multiple vesicles as opposed to a few specific organelles for major histocompatibility complex (MHC) type II-peptide loading and transport. Although newly formed MHC II-peptide complexes were detected in cathepsin D-positive, lysosomal associated membrane glycoprotein (LAMP-1)-positive lysosomes, MHC II-peptide loading also occurred in transferrin receptor-positive endosomes. Interestingly, MHC II-fluoresceinated complexes were only observed in transferrin receptor-positive organelles as opposed to MHC II-unlabelled peptide complexes which were detected in traditional early lysosomal compartments. More importantly, MHC II-peptide complexes were monitored in light transferrin receptor-positive fractions following their initial appearance in dense endosomal/lysosomal fractions. Control experiments suggested that these complexes represented intermediates in the process of migrating to the cell surface through a retrograde pathway within the macrophage.

Biochemical purification and partial characterization of a murine macrophage surface receptor possessing specificity for small aromatic moieties including fluorescein

Binding properties and requirements for internalization of hapten-protein antigens, such as fluorescein-polyderivatized bovine serum albumin (FITC-BSA) and poly-D-lysine (FITC-PDL), by murine macrophage was consistent with surface receptor recognition of fluorescyl moieties (Cherukuri et al., Mol. Immunol. 34, 21-32, 1997; Cherukuri et al., Cytometry 31, 110-124, 1998). Ligand binding properties of the putative macrophage receptor pointed toward specificity for various aromatic moieties including phenylalanine, phenyloxazolone and fluorescein (Cherukuri and Voss, Mol. Immunol. 35, 115-125, 1998). Purification of the hapten-recognizing receptor from J774 macrophage cells involved subcellular fractionation of plasma membrane fractions, and affinity chromatography of solubilized membranes employing a phenyl-Sepharose adsorbent with subsequent specific elution of receptor using fluorescein ligand. The final product was a protein with a molecular mass of approximately 180 kDa. Characterization of the purified receptor involved absorption and fluorescence spectroscopy, circular dichroism, fluorescence quenching analyses, various ligand binding assays and an immunological analysis. Spectroscopic analyses revealed that the receptor possessed aromatic amino acids while circular dichroism suggested significant alpha-helical secondary structure. Binding specificity of the purified receptor was confirmed in a spectrofluorometric assay where the fluorescence of fluorescein ligand was quenched approximately 97%. Finally, specific binding activity of the receptor with FITC-BSA was demonstrated in Western blot analysis under native conditions. Receptor purity was confirmed in amino acid sequencing analysis when the amino-terminal residue was found to be totally blocked. Results are discussed in terms of the possible identity of the isolated macrophage receptor and its biological-immunological role.

Effects of secondary forces on a high affinity monoclonal IgM anti-fluorescein antibody possessing cryoglobulin and other cross-reactive properties

The effects of secondary forces on monoclonal IgM anti-fluorescein antibody 18-2-3 reactivity were investigated and the results correlated with similar studies characterizing anti-fluorescein mAbs 4-4-20 and 9-40. mAb 18-2-3 was considered an important model for further elucidation of secondary forces since it possessed ligand binding properties similar to mAb 4-4-20, such as a similar affinity, but due to a very different primary structure it was idiotypically and metatypically distinct. mAb 18-2-3 also possessed cryoglobulin (anti-Ig) and extensive cross-reactive properties (e.g. anti-phenyloxazolone) suggestive of an atypical anti-fluorescein active site. The reactivity of mAb 18-2-3 with model fluorescein-peptides was modulated by secondary forces in a manner that differed from both mAbs 4-4-20 and 9-40. Thus, the effects of secondary forces seemed to vary with each monoclonal antibody even though each of the immunoglobulins studied were specific for the same homologous ligand. Results indicated that secondary forces impacted immune complex stability, variable domain conformation and protein dynamics. Models were postulated to account for secondary effects on the mAb 18-2-3 active site relative to mAbs 4-4-20 and 9-40. Levels of hydration, active site architecture and local amino acid dynamics were among the models cited.