Simultaneous determination of cyanobacterial hepato-and neurotoxins in water samples by ion-pair supported enrichment and HPLC-ESI-MS-MS

Analytical Methods for Anatoxin-a Determination: A Review

Anatoxin-a (ATX-a) is a potent neurotoxin produced by several species of cyanobacteria whose exposure can have direct consequences, including neurological disorders and death. The increasing prevalence of harmful cyanobacterial blooms makes the detection and reliable assessment of ATX-a levels essential to prevent the risk associated with public health. Therefore, the aim of this review is to compile the analytical methods developed to date for the detection and quantification of ATX-a levels alone and in mixtures with other cyanotoxins and their suitability. A classification of the analytical methods available is fundamental to make an appropriate choice according to the type of sample, the equipment available, and the required sensitivity and specificity for each specific purpose. The most widely used detection technique for the quantification of this toxin is liquid chromatography-tandem mass spectrometry (LC-MS/MS). The analytical methods reviewed herein focus mainly on water and cyanobacterial samples, so the need for validated analytical methods in more complex matrices (vegetables and fish) for the determination of ATX-a to assess dietary exposure to this toxin is evidenced. There is currently a trend towards the validation of multitoxin methods as opposed to single-ATX-a determination methods, which corresponds to the real situation of cyanotoxins' confluence in nature.

Bioinspired polydopamine-mediated metal-organic framework click-grafting aptamers functionalized fabric for highly-specific recognition of microcystin-leucine arginine

Fabricating functional electrospun nanofiber coating for highly selective extraction of microcystin-LR (MC-LR) was of significant importance for water-safety monitoring. Herein, a novel MOF@aptamer functionalized nanofabric was presented via a facile and reliable strategy integrating polydopamine (PDA) mediation and thiol-ene chemistry and applied for specific recognition of the MC-LR model analyte. Using polydopamine (PDA) as the mediating layer, vinyl-UiO-66 MOF was grown in situ, followed by post-synthetic modification (PSM) of Zr⁴⁺ with vinyl phosphate and rapid UV-initiated click reaction of aptamers. Uniform deposition of Zr-based MOF (vinyl-UiO-66) on the nanofibers was directly produced, and the tedious co-electrospinning process was abandoned to prevent the aggregation and encapsulation of MOF. Via an efficient "thiol-ene" chemistry, massive thiol-terminated aptamers were grafted on MOF within one step under friendly conditions, rather than the time-consuming nanoparticle adsorption or unfriendly covalent chemical reactions. As a result, the robust MOF@aptamer-coated nano-fabrics were obtained, and a highly selective performance towards MC-LR was illustrated with a limit of detection (LOD) at 0.002 ng/mL, good precision (CV<8.3%), good repeatability (2.2∼6.0%) when coupled with LC-MS. Almost 1∼2 orders of magnitude higher detection sensitivity was exhibited than that of the common non-specific SPE/SPME fiber reported so far. Applied to water samples, the good matrix-resistance ability, and acceptable recovery yields were achieved with high specificity. This strategy might provide a rapid and friendly protocol to efficiently fabricate MOF@aptamer functionalized nano-fabrics through electrospinning and interfacial "thiol-ene" chemistry for highly-selective microextraction.

Trace determination of multiple hydrophilic cyanotoxins in freshwater by off- and on-line solid phase extraction coupled to liquid chromatography-tandem mass spectrometry

Hydrophilic cyanotoxins (HCTs), such as paralytic shellfish toxins (PSTs), anatoxin-a (ATX-a), and cylindrospermopsin (CYN) are highly toxic and toxin-producing algae are widely distributed worldwide. However, HCTs, especially PSTs, are rarely reported in freshwater due to analytical limitations. This may result in an underestimation of the ecological risks and health risks. This study developed a new method to detect ATX-a, CYN, and thirteen common PSTs in freshwater simultaneously by using off-line solid phase extraction (SPE) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The limits of detection (LODs) of all targets were lower than 0.05 μg/L, which could meet the regulatory requirements for monitoring of HCTs in drinking water in different countries and regions. To improve the detection sensitivities for trace PSTs, a method based on off-line SPE and on-line SPE-LC-MS/MS was established with LOD around 0.001 μg/L. GTX1&4, GTX2&3, and GTX5 were detected in freshwater in China for the first time, highlighting that overall communities are facing potential risks of exposure to various PSTs in China. High concentrations of ATX-a and CYN were also detected in freshwater from Northern China. The proposed method helps to understand the pollution status of HCT in water bodies, especially during the non-algal bloom period.

Aptamer-functionalized metal-organic framework-coated nanofibers with multi-affinity sites for highly sensitive, selective recognition of ultra-trace microcystin-LR

A novel aptamer-functionalized metal-organic framework nanofibrous composite (viz. PAN/UiO@UiO2-N₃-aptamer) with a high aptamer coverage density was proposed based on the electrospinning and seeded growth method, and used for specific affinity recognition of trace Microcystin-LR (MC-LR). Heterobifunctional ligand was used to modify the metal-organic framework nanoparticles (MOF NPs) surface, which could passivate the MOF surface with respect to unmodified DNA, followed by coupling massive aptamers on MOF of the solid-phase microextraction (SPME) fiber using click chemistry. Characterizations including morphology, spectra analysis, mechanical stability, binding capacity and specificity were fulfilled. Applied to the analysis of MC-LR, the good selective and sensitive recognition were obtained with the detection limit as low as 0.003 ng/mL, which was better than most non-specific SPME or solid-phase extraction (SPE) protocols. The stability and reproducibility were acceptable, and the intra-day, inter-day and column-to-column relative standard deviations (RSDs) for the recovery of MC-LR were gained in the range from 2.5% to 14.3%, respectively. Satisfactory recoveries of MC-LR in environmental water samples were measured as 96.3 ± 4.7% - 98.9 ± 2.7% (n = 3) in tap water, 94.4 ± 2.5% - 96.1 ± 3.5% (n = 3) in pond water, and 97.0 ± 2.1% - 97.9 ± 3.1% (n = 3) in river water, respectively. This work demonstrated that the electrospun nanofibrous composite with massive aptamers would be a better alternative for ultra-trace MC-LR detection with good selectivity, matrix-resistance ability and high resolution.

Development and comparison of UPLC-ESI-MS and RP-HPLC-VWD methods for determining microcystin-LR

Microcystin-LR (MC-LR) generated by cyanobacteria is a kind of potent hepatotoxin, which poses a considerable threat to human health. In the research field of MC-LR removal, the quantitative analysis in a wide concentration range of samples is inevitable. In this paper, we presented the pseudo united use of an Ultra Performance Liquid Chromatography Mass Spectrometry (UPLC-MS) and High Performance Liquid Chromatography system with a Variable Wavelength Ultraviolet Detector (HPLC-VWD) approach to detect MC-LR. The UPLC-MS system was applied to determine MC-LR in trace concentration because of its high sensitivity. However, it is generally believed that the determination of high concentration samples by UPLC-MS will cause problems such as inaccurate quantification and contamination of ion sources. In consequence, the HPLC-VWD was employed to determine the high concentration of MC-LR. The sensitivity, precision and accuracy of the two methods were compared in detail. The linear ranges of UPLC-MS and HPLC-VWD methods were from 0.08 to 10 μg L⁻¹ and 1 to 5000 μg L⁻¹, respectively. The detection and quantification limits of UPLC-MS were 0.03–0.05 μg L⁻¹ and 0.08 μg L⁻¹, and the corresponding two values of HPLC-VWD were 0.6 and 1.0 μg L⁻¹. The recoveries of UPLC-MS and HPLC-VWD were 88.5–106.7% and 98.7–101.6%, with the relative standard deviations of 3.72–5.45% and 0.38–1.69%, respectively. The potential adsorption properties of MC-LR on filter membranes with diverse materials and pore sizes were evaluated and the negative results were obtained. The detection of MC-LR by UPLC-MS was free from matrix effects. The presented UPLC-MS and HPLC-VWD methods were used to analyze the water samples from Erhai Lake, which is located in Dali, Yunnan, China. The results of UPLC-MS analysis indicated that the MC-LR was only identified in water samples of Shuanglang Bay and Xier River, with concentrations of 0.120 and 0.303 μg L⁻¹, whereas MC-LR was not detected by HPLC-VWD.

UPLC-MS and HPLC-VWD methods were used together for MC-LR determination in a wide concentration range. UPLC-MS can be applied in trace MC-LR determination, whereas HPLC-VWD is more suitable for high concentration range detection.

Determination of microcystins in environmental water samples with ionic liquid magnetic graphene

Microcystins is a class of monocyclic of heptapeptides with many different isomerides. It has become potential hazardous material in water environment for its toxic, distribution and stability. This project worked on a method for determination of trace microcystin (MC-LR and MC-RR) in environmental waters. The ionic liquid magnetic graphene (IL@MG) was prepared and applied to the concentration and determination of microcystins, based on magnetic solid phase extraction (MSPE), and coupled with ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The ionic liquid magnetic graphene was prepared by coprecipitatial synthesis and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR), specific surface area (BET), pore size distribution (BJH) and magnetic hysteresis loop. The experimental parameters of magnetic solid phase extraction, including amount of IL@MG, pH, extraction time and elution solvent were investigated by a univariate method and orthogonal screening. The method showed good linearity in the range of 0.01-10.0 g/L and 0.005-10.0 μg/L for MC-LR and MC-RR, when the pH of water samples was 4.00 and 10.0 mg adsorbents were used to extract targets for 18 min. The lowest detection limit was 0.414 ng/L and 0.216 ng/L for MC-LR and MC-RR respectively. The recoveries of the microcystins were in the range of 83.6-100.9%, and the relative standard deviation was less than 7.59%. The trace amount of MC-LR (0.020 μg/L) and MC-RR (0.003 μg/L and 0.021 μg/L) was detected in actural water samples. Attributed to its simple operator, low detection limit and high sensitivity, this method could be used for the detection of trace microcystins in water samples.

Harmful algae records in Venice lagoon and in Po River Delta (northern Adriatic Sea, Italy)

A detailed review of harmful algal blooms (HAB) in northern Adriatic Sea lagoons (Po River Delta and Venice lagoon) is presented to provide “updated reference conditions” for future research and monitoring activities. In the study areas, the high mollusc production requires the necessity to identify better methods able to prevent risks for human health and socioeconomical interests. So, an integrated approach for the identification and quantification of algal toxins is presented by combining microscopy techniques with Liquid Chromatography coupled with High Resolution Time of Flight Mass Spectrometry (HPLC-HR-TOF-MS). The method efficiency was first tested on some samples from the mentioned coastal areas, where Dinophysis spp. occurred during summer in the sites directly affected by seawaters. Although cell abundance was always <200 cells/L, the presence of Pectenotoxin-2 (PTX2), detected by HPLC-HR-TOF-MS, indicated the potential release of detectable amounts of toxins even at low cell abundance.

Simultaneous quantification of microcystins and nodularin in aerosol samples using high-performance liquid chromatography/negative electrospray ionization tandem mass spectrometry

RATIONALE

Cyanobacteria are a small group of photosynthetic planktonic bacteria, producing a large group of strong hepatotoxins called microcystins (MCs). Many studies have been conducted to evaluate the presence of MCs and nodularin (NOD) in water or in marine organisms, but little research has been done on the atmospheric environment. Waterborne toxins can be found in the aerosol phase due to bubble-bursting processes.

METHODS

The aim of this study was to obtain a sensitive method for the simultaneous determination of trace concentrations of individual cyanotoxins in aerosol samples, using liquid chromatography coupled with a triple quadrupole (HPLC/MS/MS). During method development improved electrospray ionization was found in negative ion mode. In contrast with other authors, we have developed a chromatographic separation using alkaline conditions, thus achieving good resolution, improved electrospray ionization and therefore better sensitivity.

RESULTS

A sensitive analytical method was set up to simultaneously measure trace concentrations of cyanotoxins in aerosol samples in a single chromatographic analysis using the internal standard method. The limit of detection for all the toxins was determined to be between 1 fg/μL (MC LA and LF) and 9 fg/μL (NOD).

CONCLUSIONS

The method was applied to ten aerosol samples from the Venice Lagoon. In these samples, trace concentrations of MC-LA ranging between 90 fg m(-3) and 706 fg m(-3), MC-LF between n.d. and 369 fg m(-3) and MC-LW between n.d. and 262 fg m(-3). This is the first study to quantify the cyanotoxins in Venetian aerosol samples using the HPLC/(-)ESI-MS/MS.

Assessing drinking water treatment systems for safety against cyanotoxin breakthrough using maximum tolerable values

For assessing the safety of drinking water supplies suffering cyanobacterial blooms in their water source, a methodology is proposed which relates the performance of their current treatment train to the quality of the raw water. The approach considers that different treatment trains can remove algal toxins with different efficiency. Maximum Tolerable (MT-) values of the raw water expressed by cell counts or by biovolumes of cyanobacteria were calculated. Three MT-categories were identified by colours; high risk (red), moderate risk (yellow) and no risk (green). Two treatment facilities using a conventional (1) and polishing train (2) were assessed using this methodology. For most of the time during an algal bloom the water quality could be classified as yellow which means short term higher toxin levels in comparison to the guide line in clear water were found. However, the red classification, indicating a high risk for drinking water quality was never reached. The model proposed can be understood as supplement of the common alert level framework, ALF-concept (Chorus and Bartram, Situation Assessment, Planning and Management. London and New York: E & FN Spon. 1999; House et al., Management Strategies for Toxic Blue Green Algae: Literature Review. Australia: CRC for Water Quality and Treatment. 2004).

Toxicology and detection methods of the alkaloid neurotoxin produced by cyanobacteria, anatoxin-a

Freshwater resources are under stress due to naturally occurring conditions and human impacts. One of the consequences is the proliferation of cyanobacteria, microphytoplankton organisms that are capable to produce toxins called cyanotoxins. Anatoxin-a is one of the main cyanotoxins. It is a very potent neurotoxin that was already responsible for some animal fatalities. In this review we endeavor to divulgate much of the internationally published information about toxicology, occurrence and detection methods of anatoxin-a. Cyanobacteria generalities, anatoxin-a occurrence and production as well as anatoxin-a toxicology and its methods of detection are the aspects focused in this review. Remediation of anatoxin-a occurrence will be addressed with a public health perspective. Final remarks call the attention for some important gaps in the knowledge about this neurotoxin and its implication to public health. Alterations of aquatic ecosystems caused by anatoxin-a is also addressed. Although anatoxin-a is not the more frequent cyanotoxin worldwide, it has to be regarded as a health risk that can be fatal to terrestrial and aquatic organisms because of its high toxicity.

Toxins of cyanobacteria

Blue-green algae are found in lakes, ponds, rivers and brackish waters throughout the world. In case of excessive growth such as bloom formation, these bacteria can produce inherent toxins in quantities causing toxicity in mammals, including humans. These cyanotoxins include cyclic peptides and alkaloids. Among the cyclic peptides are the microcystins and the nodularins. The alkaloids include anatoxin-a, anatoxin-a(S), cylindrospermopsin, saxitoxins (STXs), aplysiatoxins and lyngbyatoxin. Both biological and chemical methods are used to determine cyanotoxins. Bioassays and biochemical assays are nonspecific, so they can only be used as screening methods. HPLC has some good prospects. For the subsequent detection of these toxins different detectors may be used, ranging from simple UV-spectrometry via fluorescence detection to various types of MS. The main problem in the determination of cyanobacterial toxins is the lack of reference materials of all relevant toxins. In general, toxicity data on cyanotoxins are rather scarce. A majority of toxicity data are known to be of microcystin-LR. For nodularins, data from a few animal studies are available. For the alkaloids, limited toxicity data exist for anatoxin-a, cylindrospermopsin and STX. Risk assessment for acute exposure could be relevant for some types of exposure. Nevertheless, no acute reference doses have formally been derived thus far. For STX(s), many countries have established tolerance levels in bivalves, but these limits were set in view of STX(s) as biotoxins, accumulating in marine shellfish. Official regulations for other cyanotoxins have not been established, although some (provisional) guideline values have been derived for microcystins in drinking water by WHO and several countries.

Simple and rapid determination of anatoxin-a in lake water and fish muscle tissue by liquid-chromatography–tandem mass spectrometry

Anatoxin-a (AN) is a powerful neurotoxin that can be produced by cyanobacteria in eutrophic freshwaters. Consequently, AN can contaminate lakes, rivers and basins destined for drinking water and aquaculture. Two simple, specific and sensitive procedures for determining AN in lake water and fish muscle tissue are presented. Both analytical protocols are based on liquid-chromatography (LC)-tandem mass spectrometry (MS) with electrospray ionization. MS data were acquired in the multi reaction monitoring mode by selecting four precursor to product ion transitions. After filtration, AN in lake water was analyzed by directly injecting 0.5 ml of the aqueous sample in the LC column. Analysis of AN in fish muscle tissue involved the matrix solid-phase dispersion technique. The analyte was extracted from tissue by 4 ml of water acidified to pH 2 and heated at 80 degrees C. After acidification and filtration, 0.2 ml of the aqueous extract was injected in the LC column. Analyte recovery ranged between 71 and 79% and was not substantially affected by both the analyte concentration and the type of fish. Phenylalanine is an essential amino acid invariably present in any animal tissue. Like AN, this amino acid produces a pseudo molecular ion at m/z 166, it has a very similar fragmentation pattern and LC retention time. This method is able to prevent identifying phenylalanine for AN as the latter compound is eluted more than 1 min before the former one and the two compounds have remarkably different relative ion signal intensities. On the basis of a signal-to-noise ratio of 10, limits of quantification of AN in water and fish fillet were estimated to be 13 ng/l and 0.5 ng/g, respectively.

An enhanced LC-MS/MS method for microcystin-LR in lake water

A LC-MS/MS method with enhanced sensitivity and specificity was established for monitoring microcystin-LR (MC-LR) in drinking water supplies in southern Taiwan. The enhanced sensitivity was achieved by the selection of a doubly charged MC-LR as the precursor ion to result in an multiple reaction monitoring (MRM) pair ions of m/z 498.6 --> 135.0. Using this ion pair, a record low detection limit of 2 pg was achieved on column, found in the available literature. A sample preparation method involving C8 solid-phase extraction gave satisfactory recoveries of the analyte. Nodularin, with structural similarity to MC-LR, was used as an internal standard to minimize matrix effects of water samples collected from six different water reservoirs in southern Taiwan, where MC-LR was detected at sub-ppb levels in all the reservoirs. The best precision and accuracy of this method were found with samples prepared to contain MC-LR at 0.1 and 1 microg l(-1). This new method requires considerably smaller water sample volumes because of enhanced quantification sensitivity and hence reduces the time needed for analysis. It should serve as a useful example for method development for monitoring other members of the microcystin family in drinking water supplies.

Simple assay for analyzing five microcystins and nodularin in fish muscle tissue: hot water extraction followed by liquid chromatography-tandem mass spectrometry

A simple, specific, and sensitive procedure for determining six cyanotoxins, that is, microcystins RR, LR, YR, LA, and LW and nodularin, in fish muscle tissue is presented. This method is based on the matrix solid-phase dispersion technique with heated water as extractant followed by liquid chromatography (LC)-tandem mass spectrometry (MS) equipped with an electrospray ion source. Target compounds were extracted from tissue by 4 mL of water acidified to pH 2 and heated at 80 degrees C. After acidification and filtration, 0.2 mL of the aqueous extract was injected in the LC column. MS data acquisition was performed in the multireaction monitoring mode, with at least two precursor ion > product ion transitions selected for each target compound. Analyte recovery ranged between 61 and 82% and was not substantially affected by either the analyte concentrations or the type of fish. The nonexcellent recovery of some of the microcystins was traced to binding of these compounds to protein phosphatases in fish tissue occurring during sample treatment. The existence of covalently bound microcystins in fish has been evidenced by several studies. Compared to an older sample preparation procedure, this one extracted larger amounts of the analytes in a simpler and much more rapid way. On the basis of a signal-to-noise ratio of 10, limits of quantification were estimated to range between 1.6 and 4.0 ng/g. The effects of temperature and volume of the extractant on the analyte recovery were studied.

1H NMR quantification in very dilute toxin solutions: application to anatoxin-a analysis

A complete procedure is described for the extraction, detection and quantification of anatoxin-a in biological samples. Anatoxin-a is extracted from biomass by a routine acid base extraction. The extract is analysed by GC-MS, without the need of derivatization, with a detection limit of 0.5 ng. A method was developed for the accurate quantification of anatoxin-a in the standard solution to be used for the calibration of the GC analysis. 1H NMR allowed the accurate quantification of microgram quantities of anatoxin-a. The accurate quantification of compounds in standard solutions is rarely discussed, but for compounds like anatoxin-a (toxins with prices in the range of a million dollar a gram), of which generally only milligram quantities or less are available, this factor in the quantitative analysis is certainly not trivial. The method that was developed can easily be adapted for the accurate quantification of other toxins in very dilute solutions.

Anatoxins and degradation products, determined using hybrid quadrupole time-of-flight and quadrupole ion-trap mass spectrometry: forensic investigations of cyanobacterial neurotoxin poisoning

The potent neurotoxins from cyanobacteria, anatoxin-a (AN), its methyl analogue, homoanatoxin-a (HMAN), and their degradation products, have been studied using nano-electrospray hybrid quadrupole time-of-flight mass spectrometry (QqTOF-MS). The anatoxin degradation products, which are readily produced in vivo by either reduction or epoxidation, were also examined in this study. The high mass accuracy QqTOF-MS data was used to confirm formula assignments for major product ions and quadrupole ion-trap (QIT)-MS was used to construct fragmentation pathways for anatoxins. Significant differences between these fragmentation pathways were observed. Comparisons between the spectra of compounds that differ in side-chain length (the AN and HMAN series) were used to identify ions that are characteristic of the homologues. The application to forensic samples in which the principal neurotoxin had undergone rapid biodegradation has been demonstrated and used to confirm anatoxin poisoning of dogs.

Analysis of cyanobacterial toxins by hydrophilic interaction liquid chromatography-mass spectrometry

The combination of hydrophilic interaction liquid chromatography with electrospray mass spectrometry (HILIC-MS) has been investigated as a tool for the analysis of assorted toxins produced by cyanobacteria. Toxins examined included saxitoxin and its various analogues (1-18), anatoxin-a (ATX-a, 19), cylindrospermopsin (CYN, 20), deoxycylindrospermopsin (doCYN, 21), and microcystins-LR (22) and -RR (23). The saxitoxins could be unequivocally detected in one isocratic analysis using a TSK gel Amide-80 column eluted with 65% B, where eluent A is water and B is a 95% acetonitrile/water solution, both containing 2.0 mM ammonium formate and 3.6 mM formic acid. The analysis of ATX-a, CYN and doCYN required 75% B isocratic. Simultaneous determination of 1-21 was also possible by using gradient elution. HILIC proved to be suitable for the analysis of microcystins, but peak shape was not symmetric and it was concluded that these compounds are best analysed using existing reversed-phase methods. The HILIC-MS method was applied to the analysis of field and cultured samples of Anabaena circinalis and Cylindrospermopsis raciborskii. In general, the method proved quite robust with similar results obtained in two different laboratories using different instrumentation.

A LC/MS Method for the Determination of Cyanobacteria Toxins in Water

The cyanobacteria toxins anatoxin-a, microcystin-LR, microcystin-RR, microcystin-YR, and nodularin were separated in less than 30 min on several 1 mm x 15 cm reversed-phase liquid chromatography (LC) columns, and their electrospray mass spectra were measured using injections of 50 ng or less with a benchtop time-of-flight (TOF) mass spectrometer. New data from this work include the following: (a) the impact of acetic acid concentrations in the methanol-water mobile phase on measured ion abundances; (b) the performance of the electrospray-TOF mass spectrometer as an LC detector; (c) the accuracy and precision of exact m/z measurements after LC separation with a routinely used mass spectrometer resolving power of 5000; and (d) recoveries of the five toxins from reagent water, river waters, and sewage treatment plant effluent samples extracted with C-18 silica particles enmeshed in thin Teflon membrane filter disks. This technique has the potential of providing a relatively simple and reasonable-cost sample preparation and LC/MS method that provides the sensitivity, selectivity, reliability, and information content needed for source and drinking water occurrence and human exposure studies.

Screening for cyanobacterial hepatotoxins, microcystins and nodularin in environmental water samples by reversed-phase liquid chromatography–electrospray ionisation mass spectrometry

Water samples taken from 93 freshwater and brackish water locations in Aland (SW Finland) in 2001 were analysed for biomass-bound microcystins and nodularin, cyanobacterial peptide hepatotoxins, by liquid chromatography-mass spectrometry (LC-MS) in selected ion recording (SIR) and multiple reaction monitoring modes, HPLC-UV, and enzyme-linked immunosorbent assay (ELISA). The extracted toxins were separated on a short C18 column with a gradient of acetonitrile and 0.5% formic acid, and quantified on a Micromass Quattro Micro triple-quadrupole mass spectrometer with an electrospray ion source operated in the positive SIR or scan mode. An injection of 50 pg of microcystin-LR, m/z 995.5, on column gave a signal-to-noise ratio of 17 (peak-to-peak) at the chosen SIR conditions. In-source or MS-MS fragmentation to m/z 135.1, a fragment common to most microcystins and nodularin, was used for confirmatory purposes. Microcystins with a total toxin concentration equal to or higher than 0.2 microg l(-1) were confirmed by all three methods in water samples from 14 locations. The highest toxin concentration in a water sample was 42 microg l(-1). The most common toxins found were microcystins RR, LR and YR with different degrees of demethylation (non-, mono- or didemethylated). Parallel results achieved with ELISA and HPLC-UV were generally in good agreement with the LC-MS SIR results.

Liquid chromatography-electrospray ionisation-mass spectrometry based method for the simultaneous determination of algal and cyanobacterial toxins in phytoplankton from marine waters and lakes followed by tentative structural elucidation of microcystins

A liquid chromatography (LC)-based method with mass spectrometric (MS) detection was developed for simultaneous determination of various algal and cyanobacterial toxins extracted from phytoplankton occurring world-wide in marine waters and lakes. The method enables quantification of saxitoxin, anatoxin-A, domoic acid, nodularin, microcystins, okadaic acid and dinophysistoxin-1 with a single chromatographic run. In addition, the applied chromatographic conditions allow isolation and identification of substances suspected to be "new" microcystins (cyclic peptides) by fraction collection, hydrolysis, derivatisation of resulting free amino acids with the modified chiral Marfey's reagent N-alpha-(2,4-dinitro-5-fluorophenyl)-L-valinamide (L-FDVA) and enantioselective analysis of the amino acid derivatives by LC-ESI-MS.

Production of drinking water from raw water containing cyanobacteria--pilot plant studies for assessing the risk of microcystin breakthrough

Toxins in cyanobacteria are a recognized risk in the treatment of drinking-water treatment. Cyanotoxins can occur in two modifications: cell bound and dissolved in water. The process of toxin release may occur naturally, but it also may be induced through the processes of drinking-water treatment. Both causes of release are relevant to the safety of drinking water. This study investigated cyanotoxin release and elimination through different treatment trains in systematic pilot-scale studies with water from the Weida Reservoir, in Thuringia, Germany. The Weida Reservoir is a dimictic mesoeutrophic reservoir typical for a number of mountainous areas in Europe, with Planktothrix rubescens as the dominant phytoplankton species, and shows a characteristic seasonal pattern of population development and microcystin occurrence. To assess the risk of microcystin breakthrough, the pilot-scale results as well as results of laboratory-scale experiments were used for developing a kinetic model of toxin release in relation to elimination. By calculating removal efficiency of total microcystins (cell bound and dissolved) for different treatment trains, raw water quality was related to the quality targets for finished water, and breakthrough risks could be calculated for given treatment trains and varying cyanobacterial population densities in the reservoir.