A method for accelerated trait conversion in plant breeding

Virus-induced overexpression of heterologous FLOWERING LOCUS T for efficient speed breeding in tomato

Potato virus X (PVX) vectors expressing the Arabidopsis thaliana FLOWERING LOCUS T (FT) or tomato FT ortholog SINGLE-FLOWER TRUSS (SFT) shortened the generation time in tomato due to accelerated tomato flowering and ripening by 14-21 d, and caused a 2-3-fold increase in the number of flowers and fruits, compared with non-infected or empty vector-infected plants. The Arabidopsis FT was more effective than the tomato orthologue SFT and there was no alteration of the flower or fruit morphology. The virus was not transmitted to the next generation; therefore viral vectors with expression of a heterologous FT will be a useful approach to speed breeding in tomato and other species.

Classification of Corn Stalk Lodging Resistance Using Equivalent Forces Combined with SVD Algorithm

Corn stalk lodging, which involves the breakage of the stalk below the ear following either bad weather, insect infestation or stormy rain, usually leads to harvest loss, increased harvesting time and higher drying costs. The objective of this study was to develop a method that can classify corn stalk lodging resistance. This method, which employed the maximum equivalent force exerted on a corn stalk, corresponding stalk agronomic traits, and the singular value decomposition (SVD) algorithm, showed that the five corn varieties with different stalk lodging resistance from two planting densities of 60,000 plants/ha and 75,000 plants/ha can be effectively classified. A customized device was designed to measure the equivalent forces. Three factors, including the planting density, the stalk diameter, and the maximum equivalent force with comprehensive contributions of −0.4603, 0.4196 and 0.4068, which are related to principal components, play an important role in the classification of corn stalk lodging resistance. The results showed that the corn stalk lodging resistance decreased with increase in planting density; however, with the increase in stalk diameter and maximum equivalent force, the lodging resistance significantly increased. Corn breeders can develop higher lodging resistance-based corn varieties by using this approach.

A Non-Destructive and Direction-Insensitive Method Using a Strain Sensor and Two Single Axis Angle Sensors for Evaluating Corn Stalk Lodging Resistance

Corn stalk lodging is caused by different factors, including severe wind storms, stalk cannibalization, and stalk rots, and it leads to yield loss. Determining how to rapidly evaluate corn lodging resistance will assist scientists in the field of crop breeding to understand the contributing factors in managing the moisture, chemical fertilizer, and weather conditions for corn growing. This study proposes a non-destructive and direction-insensitive method, using a strain sensor and two single axis angle sensors to measure the corn stalk lodging resistance in the field. An equivalent force whose direction is perpendicular to the stalk is utilized to evaluate the corn lodging properties when a pull force is applied on the corn stalk. A novel measurement device is designed to obtain the equivalent force with the coefficient of variation (CV) of 4.85%. Five corn varieties with two different planting densities are arranged to conduct the experiment using the novel measurement device. The experimental results show that the maximum equivalent force could reach up to 44 N. A strong relationship with the square of the correlation coefficient of 0.88 was obtained between the maximum equivalent forces and the corn field’s stalk lodging rates. Moreover, the stalk lodging angles corresponding to the different pull forces over a measurement time of 20 s shift monotonically along the equivalent forces. Thus, the non-destructive and direction-insensitive method is an excellent tool for rapid analysis of stalk lodging resistance in corn, providing critical information on in-situ lodging dynamics.

Genome-Wide Association Study Reveals Candidate Genes for Control of Plant Height, Branch Initiation Height and Branch Number in Rapeseed (Brassica napus L.)

Plant architecture is crucial for rapeseed yield and is determined by plant height (PH), branch initiation height (BIH), branch number (BN) and leaf and inflorescence morphology. In this study, we measured three major factors (PH, BIH, and BN) in a panel of 333 rapeseed accessions across 4 years. A genome-wide association study (GWAS) was performed via Q + K model and the panel was genotyped using the 60 k Brassica Infinium SNP array. We identified seven loci for PH, four for BIH, and five for BN. Subsequently, by determining linkage disequilibrium (LD) decay associated with 38 significant SNPs, we gained 31, 15, and 17 candidate genes for these traits, respectively. We also showed that PH is significantly correlated with BIH, while no other correlation was revealed. Notably, a GA signaling gene (BnRGA) and a flowering gene (BnFT) located on chromosome A02 were identified as the most likely candidate genes associated with PH regulation. Furthermore, a meristem initiation gene (BnLOF2) and a NAC domain transcriptional factor (BnCUC3) that may be associated with BN were identified on the chromosome A07. This study reveals novel insight into the genetic control of plant architecture and may facilitate marker-based breeding for rapeseed.

The TaDREB3 transgene transferred by conventional crossings to different genetic backgrounds of bread wheat improves drought tolerance

Drought tolerance of the wheat cultivar Bobwhite was previously enhanced by transformation with a construct containing the wheat DREB3 gene driven by the stress-inducible maize Rab17 promoter. Progeny of a single T2 transgenic line were used as pollinators in crosses with four elite bread wheat cultivars from Western Australia: Bonnie Rock, IGW-2971, Magenta and Wyalkatchem, with the aim of evaluating transgene performance in different genetic backgrounds. The selected pollinator line, BW8-9-10-3, contained multiple transgene copies, had significantly improved drought tolerance compared with wild-type plants and showed no growth and development penalties or abnormalities. A single hybrid plant was selected from each cross-combination for three rounds of backcrossing with the corresponding maternal wheat cultivar. The transgene was detected in all four F1 BC3 combinations, but stress-inducible transgene expression was found in only three of the four combinations. Under well-watered conditions, the phenotypes and grain yield components of the F2 BC3 transgene-expressing lines were similar to those of corresponding recurrent parents and null-segregants. Under severe drought conditions, the backcross lines demonstrated 12-18% higher survival rates than the corresponding control plants. Two from four F3 BC3 transgenic lines showed significantly higher yield (18.9% and 21.5%) than control plants under limited water conditions. There was no induction of transgene expression under cold stress, and therefore, no improvement of frost tolerance observed in the progenies of drought-tolerant F3 BC3 lines.

Recurrent parent genome recovery analysis in a marker-assisted backcrossing program of rice (Oryza sativa L.)

Backcross breeding is the most commonly used method for incorporating a blast resistance gene into a rice cultivar. Linkage between the resistance gene and undesirable units can persist for many generations of backcrossing. Marker-assisted backcrossing (MABC) along with marker-assisted selection (MAS) contributes immensely to overcome the main limitation of the conventional breeding and accelerates recurrent parent genome (RPG) recovery. The MABC approach was employed to incorporate (a) blast resistance gene(s) from the donor parent Pongsu Seribu 1, the blast-resistant local variety in Malaysia, into the genetic background of MR219, a popular high-yielding rice variety that is blast susceptible, to develop a blast-resistant MR219 improved variety. In this perspective, the recurrent parent genome recovery was analyzed in early generations of backcrossing using simple sequence repeat (SSR) markers. Out of 375 SSR markers, 70 markers were found polymorphic between the parents, and these markers were used to evaluate the plants in subsequent generations. Background analysis revealed that the extent of RPG recovery ranged from 75.40% to 91.3% and from 80.40% to 96.70% in BC1F1 and BC2F1 generations, respectively. In this study, the recurrent parent genome content in the selected BC2F2 lines ranged from 92.7% to 97.7%. The average proportion of the recurrent parent in the selected improved line was 95.98%. MAS allowed identification of the plants that are more similar to the recurrent parent for the loci evaluated in backcross generations. The application of MAS with the MABC breeding program accelerated the recovery of the RP genome, reducing the number of generations and the time for incorporating resistance against rice blast.

Metabolic engineering to enhance the value of plants as green factories

The promise of plants to serve as the green factories of the future is ever increasing. Plants have been used traditionally for construction, energy, food and feed. Bioactive compounds primarily derived from specialized plant metabolism continue to serve as important scaffold molecules for pharmaceutical drug production. Yet, the past few years have witnessed a growing interest on plants as the ultimate harvesters of carbon and energy from the sun, providing carbohydrate and lipid biofuels that would contribute to balancing atmospheric carbon. How can the metabolic output from plants be increased even further, and what are the bottlenecks? Here, we present what we perceive to be the main opportunities and challenges associated with increasing the efficiency of plants as chemical factories. We offer some perspectives on when it makes sense to use plants as production systems because the amount of biomass needed makes any other system unfeasible. However, there are other instances in which plants serve as great sources of biological catalysts, yet are not necessarily the best-suited systems for production. We also present emerging opportunities for manipulating plant genomes to make plant synthetic biology a reality.

The multifaceted roles of FLOWERING LOCUS T in plant development

One of the key developmental processes in flowering plants is the differentiation of the shoot apical meristem into a floral meristem. This transition is regulated through the integration of environmental and endogenous stimuli, involving a complex, hierarchical signalling network. In arabidopsis, the FLOWERING LOCUS T (FT) protein, a mobile signal recognized as a major component of florigen, has a central position in mediating the onset of flowering. FT-like genes seem to be involved in regulating the floral transition in all angiosperms examined to date. Evidence from molecular evolution studies suggests that the emergence of FT-like genes coincided with the evolution of the flowering plants. Hence, the role of FT in floral promotion is conserved, but appears to be restricted to the angiosperms. Besides flowering, FT-like proteins have also been identified as major regulatory factors in a wide range of developmental processes including fruit set, vegetative growth, stomatal control and tuberization. These multifaceted roles of FT-like proteins have resulted from extensive gene duplication events, which occurred independently in nearly all modern angiosperm lineages, followed by sub- or neo-functionalization. This review assesses the plethora of roles that FT-like genes have acquired during evolution and their implications in plant diversity, adaptation and domestication.

Genetic characterization of papaya plants (Carica papaya L.) derived from the first backcross generation

The limited number of papaya varieties available reflects the narrow genetic base of this species. The use of backcrossing as a breeding strategy can promote increases in variability, besides allowing targeted improvements. Procedures that combine the use of molecular markers and backcrossing permit a reduction of the time required for introgression of genes of interest and appropriate recovery of the recurrent genome. We used microsatellite markers to characterize the effect of first-generation backcrosses of three papaya progeny, by monitoring the level of homozygosity and the parental genomic ratio. The homozygosity level in the population ranged from 74 to 94%, with a mean of 85% for the three progenies (52-08, 52-29 and 52-34). The high level of inbreeding found among these genotypes increases the expectation of finding more than 95% fixed loci in the next generation of self-fertilization of superior genotypes. The mean proportion of the recurrent parent genome found in first-generation backcross progeny was 50.1%; 52-34 had a larger genomic region in common with the recurrent genitor and the lowest level of homozygosity. The progeny 52-08 was genetically closest to the donor genitor, and it also had the highest level of homozygosity. We found that linking conventional procedures and molecular markers contributed to an increase in the efficiency of the breeding program.

Flowering time control and applications in plant breeding

Shifting the seasonal timing of reproduction is a major goal of plant breeding efforts to produce novel varieties that are better adapted to local environments and changing climatic conditions. The key regulators of floral transition have been studied extensively in model species, and in recent years a growing number of related genes have been identified in crop species, with some notable exceptions. These sequences and variants thereof, as well as several major genes which were only identified in crop species, can now be used by breeders as molecular markers and for targeted genetic modification of flowering time. This article reviews the major floral regulatory pathways and discusses current and novel strategies for altering bolting and flowering behavior in crop plants.