State-of-the-art and novel developments of in vivo haploid technologies

Breeding for improved digestibility and processing of lignocellulosic biomass in Zea mays

Forage maize is a versatile crop extensively utilized for animal nutrition in agriculture and holds promise as a valuable resource for the production of fermentable sugars in the biorefinery sector. Within this context, the carbohydrate fraction of the lignocellulosic biomass undergoes deconstruction during ruminal digestion and the saccharification process. However, the cell wall's natural resistance towards enzymatic degradation poses a significant challenge during both processes. This so-called biomass recalcitrance is primarily attributed to the presence of lignin and ferulates in the cell walls. Consequently, maize varieties with a reduced lignin or ferulate content or an altered lignin composition can have important beneficial effects on cell wall digestibility. Considerable efforts in genetic improvement have been dedicated towards enhancing cell wall digestibility, benefiting agriculture, the biorefinery sector and the environment. In part I of this paper, we review conventional and advanced breeding methods used in the genetic improvement of maize germplasm. In part II, we zoom in on maize mutants with altered lignin for improved digestibility and biomass processing.

Application of genome editing in plant reproductive biology: recent advances and challenges

KEY MESSAGE

This comprehensive review underscores the application of genome editing in plant reproductive biology, including recent advances and challenges associated with it. Genome editing (GE) is a powerful technology that has the potential to accelerate crop improvement by enabling efficient, precise, and rapid engineering of plant genomes. Over the last decade, this technology has rapidly evolved from the use of meganucleases (homing endonucleases), zinc-finger nucleases, transcription activator-like effector nucleases to the use of clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein (CRISPR/Cas), which has emerged as a popular GE tool in recent times and has been extensively used in several organisms, including plants. GE has been successfully employed in several crops to improve plant reproductive traits. Improving crop reproductive traits is essential for crop yields and securing the world's food supplies. In this review, we discuss the application of GE in various aspects of plant reproductive biology, including its potential application in haploid induction, apomixis, parthenocarpy, development of male sterile lines, and the regulation of self-incompatibility. We also discuss current challenges and future prospects of this technology for crop improvement, focusing on plant reproduction.

Doubled haploid technology and synthetic apomixis: Recent advances and applications in future crop breeding

Doubled haploid (DH) technology and synthetic apomixis approaches can considerably shorten breeding cycles and enhance breeding efficiency. Compared with traditional breeding methods, DH technology offers the advantage of rapidly generating inbred lines, while synthetic apomixis can effectively fix hybrid vigor. In this review, we focus on (i) recent advances in identifying and characterizing genes responsible for haploid induction (HI), (ii) the molecular mechanisms of HI, (iii) spontaneous haploid genome doubling, and (iv) crop synthetic apomixis. We also discuss the challenges and potential solutions for future crop breeding programs utilizing DH technology and synthetic apomixis. Finally, we provide our perspectives about how to integrate DH and synthetic apomixis for precision breeding and de novo domestication.

RNAi-mediated downregulation of AcCENH3 can induce in vivo haploids in onion (Allium cepa L.)

Haploid induction (HI) holds great promise in expediting the breeding process in onion, a biennial cross-pollinated crop. We used the CENH3-based genome elimination technique in producing a HI line in onion. Here, we downregulated AcCENH3 using the RNAi approach without complementation in five independent lines. Out of five events, only three could produce seeds upon selfing. The progenies showed poor seed set and segregation distortion, and we were unable to recover homozygous knockdown lines. The knockdown lines showed a decrease in accumulation of AcCENH3 transcript and protein in leaf tissue. The decrease in protein content in transgenic plants was correlated with poor seed set. When the heterozygous knockdown lines were crossed with wild-type plants, progenies showed HI by genome elimination of the parental chromosomes from AcCENH3 knockdown lines. The HI efficiency observed was between 0 and 4.63% in the three events, and it was the highest (4.63%) when E1 line was crossed with wildtype. Given the importance of doubled haploids in breeding programmes, the findings from our study are poised to significantly impact onion breeding.

Haploid rhapsody: the molecular and cellular orchestra of in vivo haploid induction in plants

In planta haploid induction (HI), which reduces the chromosome number in the progeny after fertilization, has garnered increasing attention for its significant potential in crop breeding and genetic research. Despite the identification of several natural and synthetic HI systems in different plant species, the molecular and cellular mechanisms underlying these HI systems remain largely unknown. This review synthesizes the current understanding of HI systems in plants (with a focus on genes and molecular mechanisms involved), including the molecular and cellular interactions which orchestrate the HI process. As most HI systems can function across taxonomic boundaries, we particularly discuss the evidence for conserved mechanisms underlying the process. These include mechanisms involved in preserving chromosomal integrity, centromere function, gamete communication and/or fusion, and maintenance of karyogamy. While significant discoveries and advances on haploid inducer systems have arisen over the past decades, we underscore gaps in understanding and deliberate on directions for further research for a more comprehensive understanding of in vivo HI processes in plants.

Potential gene editing targets for developing haploid inducer stocks in rice and wheat with high haploid induction frequency

Doubled haploid (DH) breeding is a powerful technique to ensure global food security via accelerated crop improvement. DH can be produced in planta by employing haploid inducer stock (HIS). Widely used HIS in maize is known to be governed by ZmPLA, ZmDMP, ZmPLD3, and ZmPOD65 genes. To develop such HIS in rice and wheat, we have identified putative orthologs of these genes using in silico approaches. The OsPLD1; TaPLD1, and OsPOD6; TaPOD8 were identified as putative orthologs of ZmPLD3 and ZmPOD65 in rice and wheat, respectively. Despite being closely related to ZmPLD3, OsPLD1 and TaPLD1 have shown higher anther-specific expression. Similarly, OsPOD6 and TaPOD8 were found closely related to the ZmPOD65 based on both phylogenetic and expression analysis. However, unlike ZmPLD3 and ZmPOD65, two ZmDMP orthologs have been found for each crop. OsDMP1 and OsDMP2 in rice and TaDMP3 and TaDMP13 in wheat have shown similarity to ZmDMP in terms of both sequence and expression pattern. Furthermore, analogs to maize DMP proteins, these genes possess four transmembrane helices making them best suited to be regarded as ZmDMP orthologs. Modifying these predicted orthologous genes by CRISPR/Cas9-based genome editing can produce a highly efficient HIS in both rice and wheat. Besides revealing the genetic mechanism of haploid induction, the development of HIS would advance the genetic improvement of these crops.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03857-9.

Plant chromosome engineering - past, present and future

Spontaneous chromosomal rearrangements (CRs) play an essential role in speciation, genome evolution and crop domestication. To be able to use the potential of CRs for breeding, plant chromosome engineering was initiated by fragmenting chromosomes by X-ray irradiation. With the rise of the CRISPR/Cas system, it became possible to induce double-strand breaks (DSBs) in a highly efficient manner at will at any chromosomal position. This has enabled a completely new level of predesigned chromosome engineering. The genetic linkage between specific genes can be broken by inducing chromosomal translocations. Natural inversions, which suppress genetic exchange, can be reverted for breeding. In addition, various approaches for constructing minichromosomes by downsizing regular standard A or supernumerary B chromosomes, which could serve as future vectors in plant biotechnology, have been developed. Recently, a functional synthetic centromere could be constructed. Also, different ways of genome haploidization have been set up, some based on centromere manipulations. In the future, we expect to see even more complex rearrangements, which can be combined with previously developed engineering technologies such as recombinases. Chromosome engineering might help to redefine genetic linkage groups, change the number of chromosomes, stack beneficial genes on mini cargo chromosomes, or set up genetic isolation to avoid outcrossing.

Female meiotic drive in plants: mechanisms and dynamics

Female meiosis is fundamentally asymmetric, creating an arena for genetic elements to compete for inclusion in the egg to maximize their transmission. Centromeres, as mediators of chromosomal segregation, are prime candidates to evolve via 'female meiotic drive'. According to the centromere-drive model, the asymmetry of female meiosis ignites a coevolutionary arms race between selfish centromeres and kinetochore proteins, the by-product of which is accelerated sequence divergence. Here, I describe and compare plant models that have been instrumental in uncovering the mechanistic basis of female meiotic drive (maize) and the dynamics of active selfish centromeres in nature (monkeyflowers). Then, I speculate on the mechanistic basis of drive in monkeyflowers, discuss how centromere strength influences chromosomal segregation in plants, and describe new insights into the evolution of plant centromeres.

Haploid Induction in Indica Rice: Exploring New Opportunities

Haploid plants are of significant interest to crop breeders due to their ability to expedite the development of inbred lines. Chromosome-doubling of haploids, produced by either in vitro or in vivo methods, results in fully homozygous doubled haploids. For nearly five decades, in vitro methods of anther and microspore culture have been attempted in many crops. In rice, in vitro methods are used with some success in japonica cultivars, although indica types have remained recalcitrant to a large extent. This review aims to explore the reasons for the lack of success of in vitro methods in indica rice and discuss new advancements in in vivo haploid induction protocols in other cereals and their relevance to rice. In particular, the current level of understanding of in vivo haploid inducer systems that utilize MTL and CENH3 mutants is analyzed in detail. One notable advantage of in vivo haploid induction systems is that they do not require tissue culture competence. This makes these methods more accessible and potentially transformative for research, offering a pragmatic approach to improving indica rice cultivars. By embracing these in vivo methods and harnessing the power of gene editing technologies like CRISPR/Cas9 systems, breeders can reshape their approach to indica rice improvement.

Embryo Rescue in Plant Breeding

Embryo rescue (ER) techniques are among the oldest and most successful in vitro tissue culture protocols used with plant species. ER refers to a series of methods that promote the development of an immature or lethal embryo into a viable plant. Intraspecific, interspecific, or intergeneric crosses allow the introgression of important alleles of agricultural interest from wild species, such as resistance or tolerance to abiotic and biotic stresses or morphological traits in crops. However, pre-zygotic and post-zygotic reproductive barriers often present challenges in achieving successful hybridization. Pre-zygotic barriers manifest as incompatibility reactions that hinder pollen germination, pollen tube growth, or penetration into the ovule occurring in various tissues, such as the stigma, style, or ovary. To overcome these barriers, several strategies are employed, including cut-style or graft-on-style techniques, the utilization of mixed pollen from distinct species, placenta pollination, and in vitro ovule pollination. On the other hand, post-zygotic barriers act at different tissues and stages ranging from early embryo development to the subsequent growth and reproduction of the offspring. Many crosses among different genera result in embryo abortion due to the failure of endosperm development. In such cases, ER techniques are needed to rescue these hybrids. ER holds great promise for not only facilitating successful crosses but also for obtaining haploids, doubled haploids, and manipulating the ploidy levels for chromosome engineering by monosomic and disomic addition as well substitution lines. Furthermore, ER can be used to shorten the reproductive cycle and for the propagation of rare plants. Additionally, it has been repeatedly used to study the stages of embryonic development, especially in embryo-lethal mutants. The most widely used ER procedure is the culture of immature embryos taken and placed directly on culture media. In certain cases, the in vitro culture of ovule, ovaries or placentas enables the successful development of young embryos from the zygote stage to maturity.

Combining multiplex gene editing and doubled haploid technology in maize

A major advantage of using CRISPR/Cas9 for gene editing is multiplexing, that is, the simultaneous targeting of many genes. However, primary transformants typically contain hetero-allelic mutations or are genetic mosaic, while genetically stable lines that are homozygous are desired for functional analysis. Currently, a dedicated and labor-intensive effort is required to obtain such higher-order mutants through several generations of genetic crosses and genotyping. We describe the design and validation of a rapid and efficient strategy to produce lines of genetically identical plants carrying various combinations of homozygous edits, suitable for replicated analysis of phenotypical differences. This approach was achieved by combining highly multiplex gene editing in Zea mays (maize) with in vivo haploid induction and efficient in vitro generation of doubled haploid plants using embryo rescue doubling. By combining three CRISPR/Cas9 constructs that target in total 36 genes potentially involved in leaf growth, we generated an array of homozygous lines with various combinations of edits within three generations. Several genotypes show a reproducible 10% increase in leaf size, including a septuple mutant combination. We anticipate that our strategy will facilitate the study of gene families via multiplex CRISPR mutagenesis and the identification of allele combinations to improve quantitative crop traits.

Irradiated Pollen-Induced Parthenogenesis for Doubled Haploid Production in Sunflowers (Helianthus spp.)

Doubled haploid (DH) technology is a tool used to develop large numbers of inbred lines and increase the rate of genetic gain by shortening the breeding cycles. However, previous attempts to produce DH sunflower plants (Helianthus spp.) have resulted in limited success. In this research, we applied gamma-induced parthenogenesis to assist the production of DH sunflowers. The objectives of the study included (1) identifying optimal gamma ray doses for inducing DH sunflowers using two cytoplasmic male sterility (CMS) lines as female plants and two male pollinators with recognizable morphological markers, (2) selecting new male pollinators from wild sunflower varieties, and (3) testing the efficacy of the selected male pollinators using emasculated non-male sterile sunflower lines as female plants. In these experiments, pollen grains were irradiated with gamma ray doses ranging from 50 to 200 Gy. The optimal gamma ray dose for pollen grain irradiation and DH plant production was identified to be 100 Gy. In addition, a cultivated (G11/1440) and a wild-type (ANN1811) sunflower line can be used as common male pollinators for their distinctive morphological markers and wide capacity for DH induction by gamma-irradiated pollen grains.

Effectiveness of R1-nj Anthocyanin Marker in the Identification of In Vivo Induced Maize Haploid Embryos

Doubled haploid (DH) technology has become integral to maize breeding programs to expedite inbred line development and increase the efficiency of breeding operations. Unlike many other plant species that use in vitro methods, DH production in maize uses a relatively simple and efficient in vivo haploid induction method. However, it takes two complete crop cycles for DH line generation, one for haploid induction and the other one for chromosome doubling and seed production. Rescuing in vivo induced haploid embryos has the potential to reduce the time for DH line development and improve the efficiency of DH line production. However, the identification of a few haploid embryos (~10%) resulting from an induction cross from the rest of the diploid embryos is a challenge. In this study, we demonstrated that an anthocyanin marker, namely R1-nj, which is integrated into most haploid inducers, can aid in distinguishing haploid and diploid embryos. Further, we tested conditions that enhance R1-nj anthocyanin marker expression in embryos and found that light and sucrose enhance anthocyanin expression, while phosphorous deprivation in the media had no affect. Validating the use of the R1-nj marker for haploid and diploid embryo identification using a gold standard classification based on visual differences among haploids and diploids for characteristics such as seedling vigor, erectness of leaves, tassel fertility, etc., indicated that the R1-nj marker could lead to significantly high false positives, necessitating the use of additional markers for increased accuracy and reliability of haploid embryo identification.

Loss-of-function of gynoecium-expressed phospholipase pPLAIIγ triggers maternal haploid induction in Arabidopsis

Production of in planta haploid embryos that inherit chromosomes from only one parent can greatly increase breeding efficiency via quickly generating homozygous plants, called doubled haploid. One of the main players of in planta haploid induction is a pollen-specific phospholipase A, which is able, when mutated, to induce in vivo haploid induction in numerous monocots. However, no functional orthologous gene has been identified in dicots plants. Here, we show that loss-of-function of gynoecium-expressed phospholipase AII (pPLAIIγ) triggers maternal haploid plants in Arabidopsis, at an average rate of 1.07%. Reciprocal crosses demonstrate that haploid plants are triggered from the female side and not from the pollen, and the haploid plants carry the maternal genome. Promoter activity of pPLAIIγ shows enriched expression in the funiculus of flower development stages 13 and 18, and pPLAIIγ fused to yellow fluorescent protein reveals a plasma-membrane localization Interestingly, the polar localized PIN1 at the basal plasma membrane of the funiculus was all internalized in pplaIIγ mutants, suggesting that altered PIN1 localization in female organ could play a role in maternal haploid induction.

Creation of a watermelon haploid inducer line via ClDMP3-mediated single fertilization of the central cell

The use of doubled haploids is one of the most efficient breeding methods in modern agriculture. Irradiation of pollen grains has been shown to induce haploids in cucurbit crops, possibly because it causes preferential fertilization of the central cell over the egg cell. Disruption of the DMP gene is known to induce single fertilization of the central cell, which can lead to the formation of haploids. In the present study, a detailed method of creating a watermelon haploid inducer line via ClDMP3 mutation is described. The cldmp3 mutant induced haploids in multiple watermelon genotypes at rates of up to 1.12%. These haploids were confirmed via fluorescent markers, flow cytometry, molecular markers, and immuno-staining. The haploid inducer created by this method has the potential to greatly advance watermelon breeding in the future.

High temperature increases centromere-mediated genome elimination frequency and enhances haploid induction in Arabidopsis

Double haploid production is the most effective way to create true-breeding lines in a single generation. In Arabidopsis, haploid induction via mutation of the centromere-specific histone H3 (cenH3) has been shown when the mutant is outcrossed to the wild-type, and the wild-type genome remains in the haploid progeny. However, factors that affect haploid induction are still poorly understood. Here, we report that a mutant of the cenH3 assembly factor Kinetochore Null2 (KNL2) can be used as a haploid inducer when pollinated by the wild-type. We discovered that short-term temperature stress of the knl2 mutant increased the efficiency of haploid induction 10-fold. We also demonstrated that a point mutation in the CENPC-k motif of KNL2 is sufficient to generate haploid-inducing lines, suggesting that haploid-inducing lines in crops can be identified in a naturally occurring or chemically induced mutant population, avoiding the generic modification (GM) approach at any stage. Furthermore, a cenh3-4 mutant functioned as a haploid inducer in response to short-term heat stress, even though it did not induce haploids under standard conditions. Thus, we identified KNL2 as a new target gene for the generation of haploid-inducer lines and showed that exposure of centromeric protein mutants to high temperature strongly increases their haploid induction efficiency.

Protocol optimization and assessment of genotypic response for inbred line development through doubled haploid production in maize

BACKGROUND

Doubled haploid technology offers the fastest route of inbred line development by rapidly fixing the desirable combinations in a single year. However, the differential response of haploid induction to genetic background of maternal lines accompanied with low induction rate and high mortality rate due to artificial chromosomal doubling of haploid seedlings creates hindrance in doubled haploid production on a commercial scale under tropical conditions. To speed up the hybrid breeding programme in sub-tropical maize, efforts are reported here to optimize the protocol for efficient production of fixed lines using haploid inducers. The second-generation haploid inducers i.e. CIM2GTAILs obtained from CIMMYT, Mexico were used for haploid induction in 13 F₁s of diverse backgrounds. For standardization of chromosomal doubling protocol, various concentrations of colchicine and two seedling growth stages were used to determine the extent of chromosomal doubling and survival rate of doubled haploid plants.

RESULTS

A high mean haploid induction rate is obtained from CIM2GTAIL P2 (10%) as compared to CIM2GTAIL P1 (7.46%). Out of four treatments, CIMMYT reported protocol of chromosome doubling in tropical maize comprising combination of 0.07% colchicine and 0.1% DMSO at V₂ stage is highly effective for acquiring doubled haploid plants in sub-tropical adapted maize with high survival rate of 52.7%. However, increasing the colchicine concentration from 0.07 to 0.1% led to high mortality rate.

CONCLUSION

According to the findings, the haploid induction rate, survival rate and overall success rate varied depending upon the genotype of the inducer and the source population along with the concentrations of chemical used. The optimized protocol developed using CIMMYT haploid inducer CIM2GTAIL P2 for efficient doubled haploid production will not only fasten the breeding programme but will also reduce the production cost of doubled haploid with great efficiency in sub-tropical maize.

SMAP design: a multiplex PCR amplicon and gRNA design tool to screen for natural and CRISPR-induced genetic variation

Multiplex amplicon sequencing is a versatile method to identify genetic variation in natural or mutagenized populations through eco-tilling or multiplex CRISPR screens. Such genotyping screens require reliable and specific primer designs, combined with simultaneous gRNA design for CRISPR screens. Unfortunately, current tools are unable to combine multiplex gRNA and primer design in a high-throughput and easy-to-use manner with high design flexibility. Here, we report the development of a bioinformatics tool called SMAP design to overcome these limitations. We tested SMAP design on several plant and non-plant genomes and obtained designs for more than 80-90% of the target genes, depending on the genome and gene family. We validated the designs with Illumina multiplex amplicon sequencing and Sanger sequencing in Arabidopsis, soybean, and maize. We also used SMAP design to perform eco-tilling by tilling PCR amplicons across nine candidate genes putatively associated with haploid induction in Cichorium intybus. We screened 60 accessions of chicory and witloof and identified thirteen knockout haplotypes and their carriers. SMAP design is an easy-to-use command-line tool that generates highly specific gRNA and/or primer designs for any number of loci for CRISPR or natural variation screens and is compatible with other SMAP modules for seamless downstream analysis.

A female in vivo haploid-induction system via mutagenesis of egg cell-specific peptidases

Crop breeding schemes can be significantly accelerated by using (doubled) haploid plants. In vivo haploid induction has been applied in plant breeding for decades but is still not available for all crops and genotypes, and haploidization rates are generally very low. Therefore, methodological improvements to and new concepts for haploidization are required. Here, we report a novel system for the induction of haploid plants by mutating genes encoding egg cell-specific aspartic endopeptidases (ECSs). We show that after successful sperm-egg cell fusion, ECSs play a critical role to ensure male and female nucleus fusion after fertilization. The ecs1 ecs2 double mutant can induce haploids by both selfing and hybridization in Arabidopsis and ECS mutation is also capable of producing haploids in rice. In summary, our study develops a novel approach for maternal haploidization and provides new insights into the molecular basis of fertilization.

Accelerated Breeding for Helianthus annuus (Sunflower) through Doubled Haploidy: An Insight on Past and Future Prospects in the Era of Genome Editing

The aim of any breeding process is to fully express the targeted, superior/desirable parent characteristic in the progeny. Hybrids are often used in this dynamic, and complex process for which homozygous parents-which may require up to eight generations of back crossing and selection-are required. Doubled haploid (DH) technologies can facilitate the production of true breeding lines faster and in a more efficient manner than the traditional back crossing and selection strategies. Sunflower is the third most important oilseed crop in the world and has no available double haploid induction procedure/technique that can be efficiently used in breeding programs. A reproducible and efficient doubled haploid induction method would be a valuable tool in accelerating the breeding of new elite sunflower varieties. Although several attempts have been made, the establishment of a sunflower doubled haploid induction protocol has remained a challenge owing recalcitrance to in vitro culture regeneration. Approaches for haploid development in other crops are often cultivar specific, difficult to reproduce, and rely on available tissue culture protocols-which on their own are also cultivar and/or species specific. As an out-crossing crop, the lack of a double haploid system limits sunflower breeding and associated improvement processes, thereby delaying new hybrid and trait developments. Significant molecular advances targeting genes, such as the centromeric histone 3 (CenH3) and Matrilineal (MTL) gene with CRISPR/Cas9, and the successful use of viral vectors for the delivery of CRISPR/Cas9 components into plant cells eliminating the in vitro culture bottleneck, have the potential to improve double haploid technology in sunflower. In this review, the different strategies, their challenges, and opportunities for achieving doubled haploids in sunflower are explored.

The Roads to Haploid Embryogenesis

Although zygotic embryogenesis is usually studied in the field of seed biology, great attention has been paid to the methods used to generate haploid embryos due to their applications in crop breeding. These mainly include two methods for haploid embryogenesis: in vitro microspore embryogenesis and in vivo haploid embryogenesis. Although microspore culture systems and maize haploid induction systems were discovered in the 1960s, little is known about the molecular mechanisms underlying haploid formation. In recent years, major breakthroughs have been made in in vivo haploid induction systems, and several key factors, such as the matrilineal (MTL), baby boom (BBM), domain of unknown function 679 membrane protein (DMP), and egg cell-specific (ECS) that trigger in vivo haploid embryo production in both the crops and Arabidopsis models have been identified. The discovery of these haploid inducers indicates that haploid embryogenesis is highly related to gamete development, fertilization, and genome stability in ealry embryos. Here, based on recent efforts to identify key players in haploid embryogenesis and to understand its molecular mechanisms, we summarize the different paths to haploid embryogenesis, and we discuss the mechanisms of haploid generation and its potential applications in crop breeding. Although these haploid-inducing factors could assist egg cells in bypassing fertilization to initiate embryogenesis or trigger genome elimination in zygotes after fertilization to form haploid embryos, the fertilization of central cells to form endosperms is a prerequisite step for haploid formation. Deciphering the molecular and cellular mechanisms for haploid embryogenesis, increasing the haploid induction efficiency, and establishing haploid induction systems in other crops are critical for promoting the application of haploid technology in crop breeding, and these should be addressed in further studies.

Rapid creation of CENH3-mediated haploid induction lines using a cytosine base editor (CBE)

Haploid induction (HI) can create true-breeding lines in a single generation, which can significantly accelerates the breeding process. In recent years, scientists have developed a variety of new techniques to induce haploids through manipulation of CENH3, a variant of the centromere-specific histone H3. One alternative approach is based on CENH3 point mutations derived from EMS/TILLING, which is not lethal and yet is responsible for inducing haploids. However, most residues have been obtained by EMS mutagenesis over a long period of time. Recently, a new approach called 'base editing' was developed for plants. Here, we report a new method that uses a cytosine base editor (CBE) to create a point mutation of CENH3 as a haploid induction line, which substitutes adenine (A) for guanine (G). As proof of the extreme simplicity of this approach to create haploid-induced lines, we identified an L130F substitution within the histone fold domain in Arabidopsis thaliana. Subsequently, we tested the haploid-inducing potential of homozygous L130F plants by pollinating them with Col-0, and obtained 2.9% paternal haploid plants. In brief, our innovative technology provides a new perspective for the promotion of CENH3-mediated haploid induction in crops, and also provides a variety of options for breeders. Such conserved point mutations as L130F could be developed into a general instrument for haploid induction in a wide range of plant species. Extending these systems would represent a major advance over haploid production.

Haploid induction by nanobody-targeted ubiquitin-proteasome-based degradation of EYFP-tagged CENH3 in Arabidopsis thaliana

The generation of haploid plants accelerates the crop breeding process. One of the haploidization strategies is based on the genetic manipulation of endogenous centromere-specific histone 3 (CENH3). To extend the haploidization toolbox, we tested whether targeted in vivo degradation of CENH3 protein can be harnessed to generate haploids in Arabidopsis thaliana. We show that a recombinant anti-GFP nanobody fused to either heterologous F-box (NSlmb) or SPOP/BTB ligase proteins can recognize maternally derived enhanced yellow fluorescent protein (EYFP)-tagged CENH3 in planta and make it accessible for the ubiquitin-proteasome pathway. Outcrossing of the genomic CENH3-EYFP-complemented cenh3.1 mother with plants expressing the GFP-nanobody-targeted E3 ubiquitin ligase resulted in a haploid frequency of up to 7.6% in pooled F1 seeds. EYFP-CENH3 degradation occurred independently in embryo and endosperm cells. In reciprocal crosses, no haploid induction occurred. We propose that the uniparental degradation of EYFP-fused genomic CENH3 during early embryogenesis leads to a decrease in its level at centromeres and subsequently weakens the centromeres. The male-derived wild type CENH3 containing centromere outcompetes the CENH3-EYFP depleted centromere. Consequently, maternal chromosomes undergo elimination, resulting in haploids.

Maternal haploid waxy maize, environmental effects on grain yield, and quality parameters

Waxy maize (Zea mays L. var. ceratina Kulesh) is used in the food and textile sectors, amylopectin has an important place in the adhesive and paper sectors as well. These sectors have to buy waxy maize from abroad because there is no waxy maize variety registered yet in Turkey. In vivo maternal haploid technique was applied to obtain doubled haploid (DH) waxy lines in a short time. RWS, RWK-76, and their hybrid RWS × RWK-76 maternal haploid inducers were used as male parents in vivo maternal haploid. SSRs markers were used to identify the genetic similarity between the number of 17 DH waxy lines. Similarity ratio ranged from 12% to 68% between DH waxy lines. DH waxy lines were used in crossbreeding and created 24 hybrids. Iodine tests were made on DH waxy lines and their hybrids and analyzed some quality parameters of hybrids. Candidate waxy hybrids were selected from the progeny nursery trial. Several 16 waxy and 3 check hybrids were experimented within three locations and the average grain yield of waxy and check hybrids ranged from 8.4–12.7 t/ha and 12.7–16.2 t/ha respectively. PCA biplot analysis using the data of the average of three locations and genotype × environment interaction was determined. PC1 and PC2 variation percentages were found to be 18.32% and 75.22%, respectively. ADAX-14, ADAX-13R, ADAX-13, and ADAX-19 waxy varieties are more stable in terms of yield than other hybrids. The difference between varieties was found statistically significant for protein, oil, starch, hectoliter, and 1000 grain weight.

The Production of Helianthus Haploids: A Review of Its Current Status and Future Prospects

The genus Helianthus comprises 52 species and 19 subspecies, with the cultivated sunflower (Helianthus annuus L.) representing one of the most important oilseed crops in the world, which is also of value for fodder and technical purposes. Currently, the leading direction in sunflower breeding is to produce highly effective heterosis F₁ hybrids with increased resistance to biotic and abiotic stresses. The production of inbred parental lines via repeated self-pollination takes 4-8 years, and the creation of a commercial hybrid can take as long as 10 years. However, the use of doubled haploid technology allows for the obtainment of inbred lines in one generation, shortening the time needed for hybrid production. Moreover, it allows for the introgression of the valuable genes present in the wild Helianthus species into cultivated sunflowers. Additionally, this technology makes it possible to manipulate the ploidy level, thereby restoring fertility in interspecific hybridization. This review systematizes and analyzes the knowledge available thus far about the production of haploid and dihaploid Helianthus plants using male (isolated anther and microspore cultures) and female (unpollinated ovaries and ovules culture) gametophytes, as well as by induced parthenogenesis using γ-irradiated pollen and interspecific hybridization. The genetic, physiological, and physical factors influencing the efficiency of haploid plant production are considered. A special section focuses on the approaches used to double a haploid chromosome set and the direct and indirect methods for determining the ploidy level. The current analyzed data on the successful application of haploid sunflower plants in breeding are summarized.

Strategies for accelerating genetic gains in crop plants: special focus on speed breeding

Feeding 10 billion people sustainably by 2050 in the era of slow genetic progress has spurred urgent calls to bring more crops per unit time. Over the last century, crop physiologists and breeders have been trying to alter plant biology to investigate and intervene in developmental processes under controlled chambers. Accelerating the breeding cycle via "speed breeding" was the outcome of these experiments. Speed breeding accelerates the genetic gain via phenome and genome-assisted trait introgression, re-domestication, and plant variety registration. Furthermore, early varietal release through speed breeding offers incremental benefits over conventional methods. However, a lack of resources and species-specific protocols encumber the technological implementation, which can be alleviated by reallocating funds to establish speed breeding units. This review discusses the limitations of conventional breeding methods and various alternative strategies to accelerate the breeding process. It also discusses the intervention at various developmental stages to reduce the generation time and global impacts of speed breeding protocols developed so far. Low-cost, field-based speed breeding protocol developed by Punjab Agricultural University, Ludhiana, Punjab, India to harvest at least three generations of wheat in a year without demanding the expensive greenhouses or growth chambers is also discussed.

Applications of In Vitro Tissue Culture Technologies in Breeding and Genetic Improvement of Wheat

Sources of new genetic variability have been limited to existing germplasm in the past. Wheat has been studied extensively for various agronomic traits located throughout the genome. The large size of the chromosomes and the ability of its polyploid genome to tolerate the addition or loss of chromosomes facilitated rapid progress in the early study of wheat genetics using cytogenetic techniques. At the same time, its large genome size has limited the progress in genetic characterization studies focused on diploid species, with a small genome and genetic engineering procedures already developed. Today, the genetic transformation and gene editing procedures offer attractive alternatives to conventional techniques for breeding wheat because they allow one or more of the genes to be introduced or altered into an elite cultivar without affecting its genetic background. Recently, significant advances have been made in regenerating various plant tissues, providing the essential basis for regenerating transgenic plants. In addition, Agrobacterium-mediated, biolistic, and in planta particle bombardment (iPB) gene delivery procedures have been developed for wheat transformation and advanced transgenic wheat development. As a result, several useful genes are now available that have been transferred or would be helpful to be transferred to wheat in addition to the current traditional effort to improve trait values, such as resistance to abiotic and biotic factors, grain quality, and plant architecture. Furthermore, the in planta genome editing method will significantly contribute to the social implementation of genome-edited crops to innovate the breeding pipeline and leverage unique climate adaptations.

Developments and prospects for doubled haploid wheat

Doubled haploid production is a valuable biotechnology that can accelerate the breeding of new wheat varieties by several years through the one-step creation of 100% homozygous plants. The technology also plays important role in studying the genetic control of traits in wheat, in marker-assisted selection, in genomics and in genetic engineering. In this paper, recent advances in androgenesis and gynogenesis techniques, emphasizing predominantly the in vitro culture phase, as well as the emerging innovative approaches in researching and producing wheat doubled haploids are reviewed. Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-based genome editing, that allows targeted mutagenesis and gene targeting, is being tested extensively as a powerful and precise tool to induce doubled haploids in wheat. The review provides the reader with recent examples of gene modifications in wheat to induce haploidy.

Recurrent Plant-Specific Duplications of KNL2 and Its Conserved Function as a Kinetochore Assembly Factor

KINETOCHORE NULL2 (KNL2) plays key role in the recognition of centromeres and new CENH3 deposition. To gain insight into the origin and diversification of the KNL2 gene, we reconstructed its evolutionary history in the plant kingdom. Our results indicate that the KNL2 gene in plants underwent three independent ancient duplications in ferns, grasses and eudicots. Additionally, we demonstrated that previously unclassified KNL2 genes could be divided into two clades αKNL2 and βKNL2 in eudicots and γKNL2 and δKNL2 in grasses, respectively. KNL2s of all clades encode the conserved SANTA domain, but only the αKNL2 and γKNL2 groups additionally encode the CENPC-k motif. In the more numerous eudicot sequences, signatures of positive selection were found in both αKNL2 and βKNL2 clades, suggesting recent or ongoing adaptation. The confirmed centromeric localization of βKNL2 and mutant analysis suggests that it participates in loading of new CENH3, similarly to αKNL2. A high rate of seed abortion was found in heterozygous βKNL2 plants and the germinated homozygous mutants did not develop beyond the seedling stage. Taken together, our study provides a new understanding of the evolutionary diversification of the plant kinetochore assembly gene KNL2, and suggests that the plant-specific duplicated KNL2 genes are involved in centromere and/or kinetochore assembly for preserving genome stability.

Establishment of a dmp based maternal haploid induction system for polyploid Brassica napus and Nicotiana tabacum

Doubled haploid (DH) technology is used to obtain homozygous lines in a single generation, a technique that significantly accelerates the crop breeding trajectory. Traditionally, in vitro culture is used to generate DHs, but this technique is limited by species and genotype recalcitrance. In vivo haploid induction (HI) through seed is widely and efficiently used in maize and was recently extended to several other crops. Here we show that in vivo HI can be triggered by mutation of DMP maternal haploid inducer genes in allopolyploid (allotetraploid) Brassica napus and Nicotiana tabacum. We developed a pipeline for selection of DMP orthologs for clustered regularly interspaced palindromic repeats mutagenesis and demonstrated average amphihaploid induction rates of 2.4% and 1.2% in multiple B. napus and N. tabacum genotypes, respectively. These results further confirmed the HI ability of DMP gene in polyploid dicot crops. The DMP-HI system offers a novel DH technology to facilitate breeding in these crops. The success of this approach and the conservation of DMP genes in dicots suggest the broad applicability of this technique in other dicot crops.

Engineering Apomixis: Clonal Seeds Approaching the Fields

Apomixis is a form of reproduction leading to clonal seeds and offspring that are genetically identical to the maternal plant. While apomixis naturally occurs in hundreds of plant species distributed across diverse plant families, it is absent in major crop species. Apomixis has a revolutionary potential in plant breeding, as it could allow the instant fixation and propagation though seeds of any plant genotype, most notably F₁ hybrids. Mastering and implementing apomixis would reduce the cost of hybrid seed production, facilitate new types of hybrid breeding, and make it possible to harness hybrid vigor in crops that are not presently cultivated as hybrids. Synthetic apomixis can be engineered by combining modifications of meiosis and fertilization. Here, we review the current knowledge and recent major achievements toward the development of efficient apomictic systems usable in agriculture.

Overexpression of Modified CENH3 in Maize Stock6-Derived Inducer Lines Can Effectively Improve Maternal Haploid Induction Rates

Maize (Zea mays) doubled haploid (DH) breeding is a technology that can efficiently generate inbred lines with homozygous genetic backgrounds. Haploids are usually produced through in vivo induction by haploid inducer lines in maize. Currently, two approaches are usually used to develop maize haploid inducer lines. One is through the conventional breeding improvement based on the Stock6 germplasm, and this strategy is extensively used to induce maternal haploids in commercial maize DH breeding. Another strategy, newly developed but less utilized so far, is by genetic manipulation of the Centromeric Histone3 (CENH3) in regular lines. However, whether both approaches can be combined to develop the haploid inducer line with higher maternal haploid induction rate (HIR) has not been reported. In this study, we manipulated the Stock6-derived inducer lines by overexpressing maize CENH3 fused with different fluorescent protein tags and found that the engineered Stock6-derived lines showed an obvious increase in the maternal HIR. Intriguingly, this above strategy could be further improved by substituting a tail-altered CENH3 for the full-length CENH3 in the tagged expression cassette, resulting in a maternal HIR up to 16.3% that was increased by ~6.1% than Stock6-derived lines control. These results suggested that integration of two in vivo haploid induction methods could rapidly and effectively improve the maternal HIRs of maize Stock6-derived inducer lines, and provided a potentially feasible solution for further optimizing the process of commercial maize DH breeding.

Mini-Review: Transgenerational CRISPR/Cas9 Gene Editing in Plants

CRISPR/Cas9 genome editing has been used extensively in a wide variety of plant species. Creation of loss-of-function alleles, promoter variants and mutant collections are a few of the many uses of genome editing. In a typical workflow for sexually reproducing species, plants are generated that contain an integrated CRISPR/Cas9 transgene. After editing of the gene of interest, T-DNA null segregants can be identified in the next generation that contain only the desired edit. However, maintained presence of the CRISPR/Cas9 transgene and continued editing in the subsequent generations offer a range of applications for model plants and crops. In this review, we define transgenerational gene editing (TGE) as the continued editing of CRISPR/Cas9 after a genetic cross. We discuss the concept of TGE, summarize the current main applications, and highlight special cases to illustrate the importance of TGE for plant genome editing research and breeding.

High-resolution association mapping with libraries of immortalized lines from ancestral landraces

Association mapping with immortalized lines of landraces offers several advantages including a high mapping resolution, as demonstrated here in maize by identifying the causal variants underlying QTL for oil content and the metabolite allantoin. Landraces are traditional varieties of crops that present a valuable yet largely untapped reservoir of genetic variation to meet future challenges of agriculture. Here, we performed association mapping in a panel comprising 358 immortalized maize lines from six European Flint landraces. Linkage disequilibrium decayed much faster in the landraces than in the elite lines included for comparison, permitting a high mapping resolution. We demonstrate this by fine-mapping a quantitative trait locus (QTL) for oil content down to the phenylalanine insertion F469 in DGAT1-2 as the causal variant. For the metabolite allantoin, related to abiotic stress response, we identified promoter polymorphisms and differential expression of an allantoinase as putative cause of variation. Our results demonstrate the power of this approach to dissect QTL potentially down to the causal variants, toward the utilization of natural or engineered alleles in breeding. Moreover, we provide guidelines for studies using ancestral landraces for crop genetic research and breeding.

LightGBM: accelerated genomically designed crop breeding through ensemble learning

LightGBM is an ensemble model of decision trees for classification and regression prediction. We demonstrate its utility in genomic selection-assisted breeding with a large dataset of inbred and hybrid maize lines. LightGBM exhibits superior performance in terms of prediction precision, model stability, and computing efficiency through a series of benchmark tests. We also assess the factors that are essential to ensure the best performance of genomic selection prediction by taking complex scenarios in crop hybrid breeding into account. LightGBM has been implemented as a toolbox, CropGBM, encompassing multiple novel functions and analytical modules to facilitate genomically designed breeding in crops.

Advances in Gene Editing of Haploid Tissues in Crops

Emerging threats of climate change require the rapid development of improved varieties with a higher tolerance to abiotic and biotic factors. Despite the success of traditional agricultural practices, novel techniques for precise manipulation of the crop's genome are needed. Doubled haploid (DH) methods have been used for decades in major crops to fix desired alleles in elite backgrounds in a short time. DH plants are also widely used for mapping of the quantitative trait loci (QTLs), marker-assisted selection (MAS), genomic selection (GS), and hybrid production. Recent discoveries of genes responsible for haploid induction (HI) allowed engineering this trait through gene editing (GE) in non-inducer varieties of different crops. Direct editing of gametes or haploid embryos increases GE efficiency by generating null homozygous plants following chromosome doubling. Increased understanding of the underlying genetic mechanisms responsible for spontaneous chromosome doubling in haploid plants may allow transferring this trait to different elite varieties. Overall, further improvement in the efficiency of the DH technology combined with the optimized GE could accelerate breeding efforts of the major crops.

Applications of Doubled Haploids in Plant Breeding and Applied Research

Manifold and diverse applications of doubled haploid (DH) plants have emerged in academy and in the plant breeding industry since the first discovery of a haploid mutant in the Jimson Weed (Datura stramonium), followed by the first reports about anther culture in the same species, maternal haploids by wide crosses in tobacco (Nicotiana tabacum L.) and barley (Hordeum vulgare L.), interspecific hybridization, ovary culture (gynogenesis), isolated microspore culture, and more recently the CENH3 approach in thale cress (Arabidopsis thaliana L.) and other species. Research and development efforts were and are still significant in both user groups. Luckily, often academic and industrial partners cooperate in challenging and sometimes voluminous projects worldwide. Not only to develop innovative DH protocols and technologies per se, but also to exploit the advantages of DH plants in a huge variety of research and development experiments. This review concentrates not on the DH technologies per se, but on the application of DHs in plant-related research and development projects.

In Vitro Anther Culture for Doubled Haploid Plant Production in Spelt Wheat

Doubled haploid (DH) plant production belongs to modern biotechnology methods of plant breeding. The main advantage of DH plant production methods is the development of genetically homozygous lines in one generation, whilst in conventional breeding programmes, the development of homozygous lines requires more generations. The present chapter describes an efficient protocol for DH plant production in spelt wheat genotypes using in vitro anther culture.

Generation of Doubled Haploid Barley by Interspecific Pollination with Hordeum bulbosum

The generation of doubled haploid barley plants by means of the so-called "Bulbosum" method has been practiced for meanwhile five decades. It rests upon the pollination of barley by its wild relative Hordeum bulbosum. This can result in the formation of hybrid embryos whose further development is typically associated with the loss of the pollinator's chromosomes. In recent years, this principle has, however, only rarely been used owing to the availability of efficient methods of anther and microspore culture. On the other hand, immature pollen-derived embryogenesis is to some extent prone to segregation bias in the resultant populations of haploids, which is due to its genotype dependency. Therefore, the principle of uniparental genome elimination has more recently regained increasing interest within the plant research and breeding community. The development of the present protocol relied on the use of the spring-type barley cultivar Golden Promise. The protocol is the result of a series of comparative experiments, which have addressed various methodological facets. The most influential ones included the method of emasculation, the temperature at flowering and early embryo development, the method, point in time and concentration of auxin administration for the stimulation of caryopsis development, the developmental stage at embryo dissection, as well as the nutrient medium used for embryo rescue. The present protocol allows the production of haploid barley plants at an efficiency of ca. 25% of the pollinated florets.

Maize In Planta Haploid Inducer Lines: A Cornerstone for Doubled Haploid Technology

Doubled haploid (DH) technology produces strictly homozygous fertile plant thanks to doubling the chromosomes of a haploid embryo/seedling. Haploid embryos are derived from either male or female germ line cells and hold only half the number of chromosomes found in somatic plant tissues, albeit in a recombinant form due to meiotic genetic shuffling. DH production allows to rapidly fix these recombinant haploid genomes in the form of perfectly homozygous plants (inbred lines), which are produced in two rather than six or more generations. Thus, DH breeding enables fast evaluation of phenotypic traits on homogenous progeny. While for most crops haploid embryos are produced by costly and often genotype-dependent in vitro methods, for maize, two unique in planta systems are available to induce haploid embryos directly in the seed. Two "haploid inducer lines", identified from spontaneous maize mutants, are able to induce embryos of paternal or maternal origin. Although effortless crosses with lines of interest are sufficient to trigger haploid embryos, substantial improvements were necessary to bring DH technology to large scale production. They include the development of modern haploid inducer lines with high induction rates (8-12%), and methods to sort kernels with haploid embryos from the normal ones. Chromosome doubling represents also a crucial step in the DH process. Recent identification of genomic loci involved in spontaneous doubling opens up perspectives for a fully in planta DH pipeline in maize. Although discovered more than 60 years ago, maize haploid inducer lines still make headlines thanks to novel applications and findings. Indeed, maternal haploid induction was elegantly diverted to deliver genome editing machinery in germplasm recalcitrant to transformation techniques. The recent discovery of two molecular players controlling haploid induction allowed to revisit the mechanistic basis of maize maternal haploid induction and to successfully translate haploid induction ability to other crops.

Fifty years of a public cassava breeding program: evolution of breeding objectives, methods, and decision-making processes

This paper reviews and analyzes key features from cassava breeding at the International Center for Tropical Agriculture (CIAT) over 50 years and draws lessons for public breeding efforts broadly. The breeding team, jointly with national program partners and the private processing sector, defined breeding objectives and guiding business plans. These have evolved through the decades and currently focus on four global product profiles. The recurrent selection method also evolved and included innovations such as estimation of phenotypic breeding values, increasing the number of locations in the first stage of agronomic evaluations, gradual reduction of the duration of breeding cycles (including rapid cycling for high-heritability traits), the development of protocols for the induction of flowering, and the introduction of genome-wide predictions. The impact of cassava breeding depends significantly on the type of target markets. When roots are used for large processing facilities for starch, animal feeding or ethanol production (such as in SE Asia), the adoption of improved varieties is nearly universal and productivity at the regional scale increases significantly. When markets and relevant infrastructure are weak or considerable proportion of the production goes for local artisanal processing and on-farm consumption, the impact has been lower. The potential of novel breeding tools needs to be properly assessed for the most effective allocation of resources. Finally, a brief summary of challenges and opportunities for the future of cassava breeding is presented. The paper describes multiple ways that public and private sector breeding programs can learn from each other to optimize success.

Genome editing in cereal crops: an overview

Genome-editing technologies offer unprecedented opportunities for crop improvement with superior precision and speed. This review presents an analysis of the current state of genome editing in the major cereal crops- rice, maize, wheat and barley. Genome editing has been used to achieve important agronomic and quality traits in cereals. These include adaptive traits to mitigate the effects of climate change, tolerance to biotic stresses, higher yields, more optimal plant architecture, improved grain quality and nutritional content, and safer products. Not all traits can be achieved through genome editing, and several technical and regulatory challenges need to be overcome for the technology to realize its full potential. Genome editing, however, has already revolutionized cereal crop improvement and is poised to shape future agricultural practices in conjunction with other breeding innovations.

Lipid anchoring and electrostatic interactions target NOT-LIKE-DAD to pollen endo-plasma membrane

Phospholipases cleave phospholipids, major membrane constituents. They are thus essential for many developmental processes, including male gamete development. In flowering plants, mutation of phospholipase NOT-LIKE-DAD (NLD, also known as MTL or ZmPLA1) leads to peculiar defects in sexual reproduction, notably the induction of maternal haploid embryos. Contrary to previous reports, NLD does not localize to cytosol and plasma membrane of sperm cells but to the pollen endo-plasma membrane (endo-PM), a specific membrane derived from the PM of the pollen vegetative cell that encircles the two sperm cells. After pollen tube burst, NLD localizes at the apical region of the egg apparatus. Pharmacological approaches coupled with targeted mutagenesis revealed that lipid anchoring together with electrostatic interactions are involved in the attachment of NLD to this atypical endo-PM. Membrane surface-charge and lipid biosensors indicated that phosphatidylinositol-4,5-bisphosphate is enriched in the endo-PM, uncovering a unique example of how membrane electrostatic properties can define a specific polar domain (i.e., endo-PM), which is critical for plant reproduction and gamete formation.

Doubled Haploids in Eggplant

Eggplant is a solanaceous crop cultivated worldwide for its edible fruit. Eggplant breeding programs are mainly aimed to the generation of F1 hybrids by crossing two highly homozygous, pure lines, which are traditionally obtained upon several self crossing generations, which is an expensive and time consuming process. Alternatively, fully homozygous, doubled haploid (DH) individuals can be induced from haploid cells of the germ line in a single generation. Several attempts have been made to develop protocols to produce eggplant DHs principally using anther culture and isolated microspore culture. Eggplant could be considered a moderately recalcitrant species in terms of ability for DH production. Anther culture stands nowadays as the most valuable technology to obtain eggplant DHs. However, the theoretical possibility of having plants regenerated from somatic tissues of the anther walls cannot be ruled out. For this reason, the use of isolated microspores is recommended when possible. This approach still has room for improvement, but it is largely genotype-dependent. In this review, we compile the most relevant advances made in DH production in eggplant, their application to breeding programs, and the future perspectives for the development of other, less genotype-dependent, DH technologies.

Understanding and exploiting uniparental genome elimination in plants: insights from Arabidopsis thaliana

Uniparental genome elimination (UGE) refers to the preferential exclusion of one set of the parental chromosome complement during embryogenesis following successful fertilization, giving rise to uniparental haploid progeny. This artificially induced phenomenon was documented as one of the consequences of distant (wide) hybridization in plants. Ten decades since its discovery, attempts to unravel the molecular mechanism behind this process remained elusive due to a lack of genetic tools and genomic resources in the species exhibiting UGE. Hence, its successful adoption in agronomic crops for in planta (in vivo) haploid production remains implausible. Recently, Arabidopsis thaliana has emerged as a model system to unravel the molecular basis of UGE. It is now possible to simulate the genetic consequences of distant crosses in an A. thaliana intraspecific cross by a simple modification of centromeres, via the manipulation of the centromere-specific histone H3 variant gene, CENH3. Thus, the experimental advantages conferred by A. thaliana have been used to elucidate and exploit the benefits of UGE in crop breeding. In this review, we discuss developments and prospects of CENH3 gene-mediated UGE and other in planta haploid induction strategies to illustrate its potential in expediting plant breeding and genetics in A. thaliana and other model plants.

Comparative Embryogenesis in Angiosperms: Activation and Patterning of Embryonic Cell Lineages

Following fertilization in flowering plants (angiosperms), egg and sperm cells unite to form the zygote, which generates an entire new organism through a process called embryogenesis. In this review, we provide a comparative perspective on early zygotic embryogenesis in flowering plants by using the Poaceae maize and rice as monocot grass and crop models as well as Arabidopsis as a eudicot model of the Brassicaceae family. Beginning with the activation of the egg cell, we summarize and discuss the process of maternal-to-zygotic transition in plants, also taking recent work on parthenogenesis and haploid induction into consideration. Aspects like imprinting, which is mainly associated with endosperm development and somatic embryogenesis, are not considered. Controversial findings about the timing of zygotic genome activation as well as maternal versus paternal contribution to zygote and early embryo development are highlighted. The establishment of zygotic polarity, asymmetric division, and apical and basal cell lineages represents another chapter in which we also examine and compare the role of major signaling pathways, cell fate genes, and hormones in early embryogenesis. Except for the model Arabidopsis, little is known about embryopatterning and the establishment of the basic body plan in angiosperms. Using available in situ hybridization, RNA-sequencing, and marker data, we try to compare how and when stem cell niches are established. Finally, evolutionary aspects of plant embryo development are discussed.

Site-Directed Mutagenesis in Barley Using RNA-Guided Cas Endonucleases During Microspore-Derived Generation of Doubled Haploids

In plant research and breeding, haploid technology is employed upon crossing, induced mutagenesis or genetic engineering to generate populations of meiotic recombinants that are themselves genetically fixed. Thanks to the speed and efficiency in producing true-breeding lines, haploid technology has become a major driver of modern crop improvement. In the present study, we used embryogenic pollen cultures of winter barley ( Hordeum vulgare ) for Cas9 endonuclease-mediated targeted mutagenesis in haploid cells, which facilitates the generation of homozygous primary mutant plants. To this end, microspores were extracted from immature anthers, induced to undergo cell proliferation and embryogenic development in vitro, and were then inoculated with Agrobacterium for the delivery of T-DNAs comprising expression units for Cas9 endonuclease and target gene-specific guide RNAs (gRNAs). Amongst the regenerated plantlets, mutants were identified by PCR amplification of the target regions followed by sequencing of the amplicons. This approach also enabled us to discriminate between homozygous and heterozygous or chimeric mutants. The heritability of induced mutations and their homozygous state were experimentally confirmed by progeny analyses. The major advantage of the method lies in the preferential production of genetically fixed primary mutants, which facilitates immediate phenotypic analyses and, relying on that, a particularly efficient preselection of valuable lines for detailed investigations using their progenies.

Centromere Engineering as an Emerging Tool for Haploid Plant Production: Advances and Challenges

Haploid production is of great importance in plant breeding programs. Doubled haploid technology accelerates the generation of inbred lines with homozygosity in all loci in a single year. Haploids can be induced in vitro via cultivating the haploid gametes or in vivo through inter- and intraspecific hybridization. Haploid induction through centromere engineering is a novel system that is theoretically applicable to many plant species. The present review chapter discusses the proposed molecular mechanisms of selective chromosome elimination in early embryogenesis and the effects of kinetochore component modifications on proper chromosome segregation. Finally, the advantages and limitations of the CENH3-mediated haploidization approach and its applications are highlighted.