Tinidazole Removal from Aqueous Solution by Sonolysis in the Presence of Hydrogen Peroxide

Combination of advanced nano-Fenton process and sonication for destruction of diclofenac and variables optimization using response surface method

Diclofenac (DCF) as a non-steroidal pharmaceutical has been detected in aquatic samples more than other compounds due to its high consumption and limited biodegradability. In this study, ultrasound waves were applied along with an advanced nano-Fenton process (US/ANF) to remove DCF, and subsequently, the synergistic effect was determined. Before that, the efficiency of the US and ANF processes was separately studied. The central composite design was used as one of the most applicable responses surface method techniques to determine the main and interactive effect of the factors influencing DCF removal efficiency in US/ANF. The mean DCF removal efficiency under different operational conditions and at the time of 1-10 min was obtained to be about 4%, 83%, and 95% for the US, ANF, and US/ANF, respectively. Quadratic regression equations for two frequencies of US were developed using multiple regression analysis involving main, quadratic, and interaction effects. The optimum condition for DCF removal was obtained at time of 8.17 min, H/F of 10.5 and DCF concentration of 10.12 at 130 kHz US frequency. The synergy index values showed a slight synergistic effect for US/ANF (1.1). Although the synergistic effect of US/ANF is not very remarkable, it can be considered as a quick and efficient process for the removal of DCF from wastewater with a significant amount of mineralization.

SARS-CoV-2 pharmaceutical drugs: a critical review on the environmental impacts, chemical characteristics, and behavior of advanced oxidation processes in water

This review summarizes research data on the pharmaceutical drugs used to treat the novel SARS-CoV-2 virus, their characteristics, environmental impacts, and the advanced oxidation processes (AOP) applied to remove them. A literature survey was conducted using the electronic databases Science Direct, Scopus, Taylor & Francis, Google Scholar, PubMed, and Springer. This complete research includes and discusses relevant studies that involve the introduction, pharmaceutical drugs used in the SARS-CoV-2 pandemic: chemical characteristics and environmental impact, advanced oxidation process (AOP), future trends and discussion, and conclusions. The results show a full approach in the versatility of AOPs as a promising solution to minimize the environmental impact associated with these compounds by the fact that they offer different ways for hydroxyl radical production. Moreover, this article focuses on introducing the fundamentals of each AOP, the main parameters involved, and the concomitance with other sources and modifications over the years. Photocatalysis, sonochemical technologies, electro-oxidation, photolysis, Fenton reaction, ozone, and sulfate radical AOP have been used to mineralize SARS-CoV-2 pharmaceutical compounds, and the efficiencies are greater than 65%. According to the results, photocatalysis is the main technology currently applied to remove these pharmaceuticals. This process has garnered attention because solar energy can be directly utilized; however, low photocatalytic efficiencies and high costs in large-scale practical applications limit its use. Furthermore, pharmaceuticals in the environment are diverse and complex. Finally, the review also provides ideas for further research needs and major concerns.

The effect of high hydrostatic pressure on tetracycline hydrochloride and sulfathiazole residues in various food matrices - comparison with ultrasound and heat treatment

Antibiotic residues in food pose serious direct and indirect risks for consumers. The aim of this study was to investigate the effect of High Hydrostatic Pressure (HHP) on tetracycline hydrochloride (TCH) and sulfathiazole (STZ) residues in honey, milk, and water. Three different pressures were tested for their efficiency and treatment at 580 MPa for 6 min was finally selected. Qualitative and quantitative determination of antibiotics were performed with HPLC and LC-MS. HHP treatment was compared to ultrasound and heat treatment. HHP treatment was found to be more effective than the other two methods for both antibiotics in water and milk. The reduction of STZ in honey was over 90%, while no reduction was observed for TCH. The highest TCH reduction was recorded after HHP treatment in water (76.4%) and the highest STZ reduction after ultrasound treatment in honey (94.3%). Reduction of the two antibiotics in different matrices did not follow a similar pattern. For the HHP treatment, the effect of the initial concentration of the two antibiotics was studied under two different storage conditions (refrigerated and frozen storage). The effectiveness of the method was found to be affected by the initial concentration, in both storage conditions for STZ, while for TCH significant differences were observed only for refrigerated storage.

A review on pharmaceuticals removal from waters by single and combined biological, membrane filtration and ultrasound systems

Contaminants of emerging concern (CEC) such as pharmaceuticals commonly found in urban and industrial wastewater are a potential threat to human health and have negative environmental impact. Most wastewater treatment plants cannot efficiently remove these compounds and therefore, many pharmaceuticals end up in aquatic ecosystems, inducing problems such as toxicity and antibiotic-resistance. This review reports the extent of pharmaceutical removal by individual processes such as bioreactors, advanced oxidation processes and membrane filtration systems, all of which are not 100% efficient and can lead to the direct discharge of pharmaceuticals into water bodies. Also, the importance of understanding biotransformation of pharmaceutical compounds during biological and ultrasound treatment, and its impact on treatment efficacy will be reviewed. Different combinations of the processes above, either as an integrated configuration or in series, will be discussed in terms of their degradation efficiency and scale-up capabilities. The trace quantities of pharmaceutical compounds in wastewater and scale-up issues of ultrasound highlight the importance of membrane filtration as a concentration and volume reduction treatment step for wastewater, which could subsequently be treated by ultrasound.

Sonochemical processes for the degradation of antibiotics in aqueous solutions: A review

Antibiotic residues in water are general health and environmental risks due to the antibiotic-resistance phenomenon. Sonication has been included among the advanced oxidation processes (AOPs) used to remove recalcitrant contaminants in aquatic environments. Sonochemical processes have shown substantial advantages, including cleanliness, safety, energy savings and either negligible or no secondary pollution. This review provides a wide overview of the different protocols and degradation mechanisms for antibiotics that either use sonication alone or in hybrid processes, such as sonication with catalysts, Fenton and Fenton-like processes, photolysis, ozonation, etc.

New insights into the degradation of synthetic pollutants in contaminated environments

The environment is contaminated by synthetic contaminants owing to their extensive applications globally. Hence, the removal of synthetic pollutants (SPs) from the environment has received widespread attention. Different remediation technologies have been investigated for their abilities to eliminate SPs from the ecosystem; these include photocatalysis, sonochemical techniques, nanoremediation, and bioremediation. SPs, which can be organic or inorganic, can be degraded by microbial metabolism at contaminated sites. Owing to their diverse metabolisms, microbes can adapt to a wide variety of environments. Several microbial strains have been reported for their bioremediation potential concerning synthetic chemical compounds. The selection of potential strains for large-scale removal of organic pollutants is an important research priority. Additionally, novel microbial consortia have been found to be capable of efficient degradation owing to their combined and co-metabolic activities. Microbial engineering is one of the most prominent and promising techniques for providing new opportunities to develop proficient microorganisms for various biological processes; here, we have targeted the SP-degrading mechanisms of microorganisms. This review provides an in-depth discussion of microbial engineering techniques that are used to enhance the removal of both organic and inorganic pollutants from different contaminated environments and under different conditions. The degradation of these pollutants is investigated using abiotic and biotic approaches; interestingly, biotic approaches based on microbial methods are preferable owing to their high potential for pollutant removal and cost-effectiveness.

Characteristics and Behavior of Different Catalysts Used for Water Decontamination in Photooxidation and Ozonation Processes

The objective of this study was to summarize the results obtained in a wide research project carried out for more than 15 years on the catalytic activity of different catalysts (activated carbon, metal–carbon xerogels/aerogels, iron-doped silica xerogels, ruthenium metal complexes, reduced graphene oxide-metal oxide composites, and zeolites) in the photooxidation (by using UV or solar radiation) and ozonation of water pollutants, including herbicides, naphthalenesulfonic acids, sodium para-chlorobenzoate, nitroimidazoles, tetracyclines, parabens, sulfamethazine, sodium diatrizoate, cytarabine, and surfactants. All catalysts were synthesized and then texturally, chemically, and electronically characterized using numerous experimental techniques, including N2 and CO2 adsorption, mercury porosimetry, thermogravimetric analysis, X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV–vis spectroscopy, photoluminescence analysis, and transmission electron microscopy. The behavior of these materials as photocatalysts and ozonation catalysts was related to their characteristics, and the catalytic mechanisms in these advanced oxidation processes were explored. Investigations were conducted into the effects on pollutant degradation, total organic carbon reduction, and water toxicity of operational variables and the presence of different chemical species in ultrapure, surface, ground, and wastewaters. Finally, a review is provided of the most recent and relevant published studies on photocatalysis and catalyzed ozonation in water treatments using similar catalysts to those examined in our project.

Highly efficient chloramphenicol degradation by UV and UV/H2 O2 processes based on LED light source

In this study, UV-LED was employed as a novel light source to investigate the degradation of a representative antibiotic compound, chloramphenicol (CAP), in the absence or presence of H₂ O₂ . The UV-LED irradiation showed a higher capability for degradation of CAP than conventional UV-Hg vapor lamps. Effects of the initial CAP concentration, UV wavelength, and light intensity on the degradation of CAP by UV-LED were evaluated. Introduction of H₂ O₂ evidently enhanced the degradation efficiency of CAP due to the production of reactive hydroxyl radicals. Results showed that the UV-LED/H₂ O₂ removed CAP by up to 95% within 60 min at pH 5.0, which was twice as that achieved by the UV-LED alone. The degradation products were identified to propose plausible degradation pathways. Moreover, the formation potentials of typical carbonaceous disinfection by-products (C-DBPs) and nitrogenous disinfection by-products (N-DBPs) were assessed for the CAP polluted water treated by the UV-LED alone and UV-LED/H₂ O₂ processes. Results indicate unintended formation of certain DBPs, thereby highlighting the importance of health risk assessments before practical application. This study opens a new avenue for developing environment-friendly and high-performance UV-LED photocatalytic reactors for abatement of CAP pollution in water. PRACTITIONER POINTS: UV-LED bore higher capability to degrade CAP than low-pressure Hg lamp. The optimal performance to degrade CAP can be achieved at the UV wavelength of 280 nm. The degradation efficiency under UV-LED/H₂ O₂ process was double of that under UV-LED process. TCM, DCAN, and TCNM formation were higher under the existence of UV-LED radiation. The addition of H₂ O₂ had greater influence on the formation of DCAcAm than the introduction of UV-LED.

The adsorption characteristics and degradation mechanism of tinidazole on an anatase TiO2 surface: a DFT study

The adsorption characteristics and degradation mechanism of tinidazole on TiO2(101) and (001) surfaces under vacuum and aqueous solution conditions were studied by density functional theory (DFT). The results show that tinidazole can adsorb on the surfaces of TiO2(101) and (001) under different conditions. The hydrogen bond generated during the adsorption process can enhance the stability of the adsorption configuration, which makes the bond length of C-N of tinidazole longer and finally facilitates the ring-opening degradation reaction. As for the mechanism of the ring-opening degradation reaction, it was found that ring-opening can be carried out along reaction route II on both crystal surfaces, and the reaction activation energy is lower on (101) surface. Under the conditions of aqueous solution, the decrease of the activation energy of the ring-opening degradation reaction indicates that the solvent conditions can promote the degradation reaction.

Hybrid Advanced Oxidation Processes Involving Ultrasound: An Overview

Sonochemical oxidation of organic pollutants in an aqueous environment is considered to be a green process. This mode of degradation of organic pollutants in an aqueous environment is considered to render reputable outcomes in terms of minimal chemical utilization and no need of extreme physical conditions. Indiscriminate discharge of toxic organic pollutants in an aqueous environment by anthropogenic activities has posed major health implications for both human and aquatic lives. Hence, numerous research endeavours are in progress to improve the efficiency of degradation and mineralization of organic contaminants. Being an extensively used advanced oxidation process, ultrasonic irradiation can be utilized for complete mineralization of persistent organic pollutants by coupling/integrating it with homogeneous and heterogeneous photocatalytic processes. In this regard, scientists have reported on sonophotocatalysis as an effective strategy towards the degradation of many toxic environmental pollutants. The combined effect of sonolysis and photocatalysis has been proved to enhance the production of high reactive-free radicals in aqueous medium which aid in the complete mineralization of organic pollutants. In this manuscript, we provide an overview on the ultrasound-based hybrid technologies for the degradation of organic pollutants in an aqueous environment.

Integrated advanced oxidation process, sono-Fenton treatment, for mineralization and volume reduction of activated sludge

In this work, the efficiencies of Fenton catalytic and sonolysis processes were investigated separately and in combination together for the treatment and reduction of sludge volume. Moreover, the effects of operating parameters such as retention time, initial pH, iron concentration, and H₂O₂ concentration on COD reduction as well as the proportion of volatile solids to total solids (VS/TS) were studied. Finally, the effects of these processes on the sludge volume index (SVI) and sludge volume reduction (SVR) were evaluated. According to the results, the retention time of 60 min, pH = 3, hydrogen peroxide concentration of 0.13 M/L, and iron concentration of 2 mM/L were achieved as the optimum values. Furthermore, the SVR and SVI removal efficiencies in the Fenton process were 19% and 25%, respectively, but the removal efficiency in sonolysis process was very low and can be ignored. Under optimum conditions in sono-Fenton (SF) process, the SVR and SVI removal efficiencies were 55.7% and 83%, respectively. The results showed that by combining sonolysis and Fenton processes; due to the synergistic effect of ultrasonic waves, Fenton agent, and the production of more hydroxyl radicals; the COD removal efficiency increased to 77%, and the proportion of VS/TS in row activated sludge was reduced from 75% to 26%. Generally, by combining sonolysis and Fenton processes, the removal efficiency increased significantly as compared to separate processes owing to the production of more oxidizing agents and improving mass transfer.

Sulfonamides degradation assisted by UV, UV/H2O2 and UV/K2S2O8: Efficiency, mechanism and byproducts cytotoxicity

The objective of this study was to analyze the effectiveness of UVC, UVC/H₂O₂ and UVC/K₂S₂O₈ on the degradation of SAs. Rate constant values increased in the order SMZ < SDZ < SML and showed the higher photodegradation of sulfonamides with a penta-heterocycle. Quantum yields were 1.72 × 10^-5 mol E^-1, 3.02 × 10^-5 mol E^-1, and 6.32 × 10^-5 mol E^-1 for SMZ, SDZ and SML, respectively, at 60 min of treatment. R₂₅₄ values show that the dose habitually utilized for water disinfection is inadequate to remove this type of antibiotic. The initial sulfonamide concentration has a major impact on the degradation rate. The degradation rates were higher at pH 12 for SMZ and SML. SMZ and SML photodegradation k_λ values are higher in tap versus distilled water. The presence of radical promoters generates a greater increase in the degradation rate, UVC/K₂S₂O₈ cost less energy, a mechanism was proposed, and the degradation by-products are less toxic than the original product.

Removal of benzotriazole by Photo-Fenton like process using nano zero-valent iron: response surface methodology with a Box-Behnken design

In this paper, the removal of benzotriazole (BTA) was investigated by a Photo-Fenton process using nano zero valent iron (NZVI) and optimization by response surface methodology based on Box-Behnken method. Effect of operating parameters affecting removal efficiency such as H2O2, NZVI, and BTA concentrations as well as pH was studied. All the experiments were performed in the presence of ultraviolet radiation. Predicted levels and BTA removal were found to be in good agreement with the experimental levels (R2 = 0. 9500). The optimal parameters were determined at 60 min reaction time, 15 mg L-1 BTA, 0.10 g L-1 NZVI, and 1.5 mmol L-1 H2O2 for Photo-Fenton-like reaction. NZVI was characterized using X-ray diffraction (XRD), transmission electron microscope (TEM) images, and scanning electron microscope (SEM) analysis.