Aerobic degradation of BTEX compounds by Streptomyces species isolated from activated sludge and agricultural soils

Degradation of multiple PAHs and co-contaminants by microbial consortia and their toxicity assessment

The anthropogenic activities toward meeting the energy requirements have resulted in an alarming rise in environmental pollution levels. Among pollutants, polycyclic aromatic hydrocarbons (PAHs) are the most predominant due to their persistent and toxic nature. Amidst the several pollutants depuration methods, bioremediation utilizing biodegradation is the most viable alternative. This study investigated the biodegradation efficacy using developed microbial consortium PBR-21 for 2-4 ringed PAHs named naphthalene (NAP), anthracene (ANT), fluorene (FLU), and pyrene (PYR). The removal efficiency was observed up to 100 ± 0.0%, 70.26 ± 4.2%, 64.23 ± 2.3%, and 61.50 ± 2.6%, respectively, for initial concentrations of 400 mg L-1 for NAP, ANT, FLU, and PYR respectively. Degradation followed first-order kinetics with rate constants of 0.39 d-1, 0.10 d-1, 0.08 d-1, and 0.07 d-1 and half-lifet 1 / 2  of 1.8 h, 7.2 h, 8.5 h, and 10 h, respectively. The microbial consortia were found to be efficient towards the co-contaminants with 1 mM concentration. Toxicity examination indicated that microbial-treated PAHs resulted in lesser toxicity in aquatic crustaceans (Artemia salina) than untreated PAHs. Also, the study suggests that indigenous microbial consortia PBR-21 has the potential to be used in the bioremediation of PAH-contaminated environment.

Novel BTEX-degrading strains from subsurface soil: Isolation, identification and growth evaluation

Monoaromatic hydrocarbons such as benzene, toluene, ethylbenzene, and o, m, and p-xylenes (BTEX) are high-risk pollutants because of their mutagenic and carcinogenic nature. These pollutants are found with elevated levels in groundwater and soil in Canada at several contaminated sites. The intrinsic microbes present in the subsurface have the potential to degrade pollutants by their metabolic pathways and convert them to non-toxic products. However, the low subsurface temperature (5-10 °C) limits their growth and degradation ability. This study examined the feasibility of subsurface heat augmentation using geothermal heating for BTEX bioremediation. Novel potent BTEX-degrading bacterial strains were isolated from soil at 3.0, 42.6, and 73.2 m depths collected from a geothermal borehole during installation and screened using an enrichment technique. The selected strains were identified with Sanger sequencing and phylogenetic tree analysis, revealing that all the strains except Bacillus subtilis are novel with respective to BTEX degradation. The isolates, Microbacterium esteraromaticum and Bacillus infantis showed the highest degradation with 67.98 and 65.2% for benzene, 72.8 and 71.02% for toluene, 77.52 and 76.44% for ethylbenzene, and 74.58 and 74.04% for xylenes respectively. Further, temperature influence at 15 ± 1 °C, 28 ± 1 °C and 40 ± 1 °C was observed, which showed increased growth by two-fold and on average 35-49% more biodegradation at higher temperatures. Results showed that temperature is a positive stimulant for bioremediation, hence geothermal heating could also be a stimulant for in-situ bioremediation.

Influence of growth substrate and contaminant mixtures on the degradation of BTEX and MTBE by Rhodococcus rhodochrous ATCC strain 21198

The degradation of the prevalent environmental contaminants benzene, toluene, ethylbenzene, and xylenes (BTEX) along with a common co-contaminant methyl tert-butyl ether (MTBE) by Rhodococcus rhodochrous ATCC Strain 21198 was investigated. The ability of 21198 to degrade these contaminants individually and in mixtures was evaluated with resting cells grown on isobutane, 1-butanol, and 2-butanol. Growth of 21198 in the presence of BTEX and MTBE was also studied to determine the growth substrate that best supports simultaneous microbial growth and contaminants degradation. Cells grown on isobutane, 1-butanol, and 2-butanol were all capable of degrading the contaminants, with isobutane grown cells exhibiting the most rapid degradation rates and 1-butanol grown cells exhibiting the slowest. However, in conditions where BTEX and MTBE were present during microbial growth, 1-butanol was determined to be an effective substrate for supporting concurrent growth and contaminant degradation. Contaminant degradation was found to be a combination of metabolic and cometabolic processes. Evidence for growth of 21198 on benzene and toluene is presented along with a possible transformation pathway. MTBE was cometabolically transformed to tertiary butyl alcohol, which was also observed to be transformed by 21198. This work demonstrates the possible utility of primary and secondary alcohols to support biodegradation of monoaromatic hydrocarbons and MTBE. Furthermore, the utility of 21198 for bioremediation applications has been expanded to include BTEX and MTBE.

Metagenomic analysis reveals specific BTEX degrading microorganisms of a bacterial consortium

Petroleum hydrocarbon contamination is of environmental and public health concerns due to its toxic components. Bioremediation utilizes microbial organisms to metabolism and remove these contaminants. The aim of this study was to enrich a microbial community and examine its potential to degrade petroleum hydrocarbon. Through successive enrichment, we obtained a bacterial consortium using crude oil as sole carbon source. The 16 S rRNA gene analysis illustrated the structural characteristics of this community. Metagenomic analysis revealed the specific microbial organisms involved in the degradation of cyclohexane and all the six BTEX components, with a demonstration of the versatile metabolic pathways involved in these reactions. Results showed that our consortium contained the full range of CDSs that could potentially degrade cyclohexane, benzene, toluene, and (o-, m-, p-) xylene completely. Interestingly, a single taxon that possessed all the genes involved in either the activation or the central intermediates degrading pathway was not detected, except for the Novosphingobium which contained all the genes involved in the upper degradation pathway of benzene, indicating the synergistic interactions between different bacterial genera during the hydrocarbon degradation.

Electron acceptors determine the BTEX degradation capacity of anaerobic microbiota via regulating the microbial community

Anaerobic degradation is the major pathway for microbial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) under electron acceptor lacking conditions. However, how exogenous electron acceptors modulate BTEX degradation through shaping the microbial community structure remains poorly understood. Here, we investigated the effect of various exogenous electron acceptors on BTEX degradation as well as methane production in anaerobic microbiota, which were enriched from the same contaminated soil. It was found that the BTEX degradation capacities of the anaerobic microbiota gradually increased along with the increasing redox potentials of the exogenous electron acceptors supplemented (WE: Without exogenous electron acceptors < SS: Sulfate supplement < FS: Ferric iron supplement < NS: Nitrate supplement), while the complexity of the co-occurring networks (e.g., avgK and links) of the microbiota gradually decreased, showing that microbiota supplemented with higher redox potential electron acceptors were less dependent on the formation of complex microbial interactions to perform BTEX degradation. Microbiota NS showed the highest degrading capacity and the broadest substrate-spectrum for BTEX, and it could metabolize BTEX through multiple modules which not only contained fewer species but also different key microbial taxa (eg. Petrimonas, Achromobacter and Comamonas). Microbiota WE and FS, with the highest methanogenic capacities, shared common core species such as Sedimentibacter, Acetobacterium, Methanobacterium and Smithella/Syntrophus, which cooperated with Geobacter (microbiota WE) or Desulfoprunum (microbiota FS) to perform BTEX degradation and methane production. This study demonstrates that electron acceptors may alter microbial function by reshaping microbial community structure and regulating microbial interactions and provides guidelines for electron acceptor selection for bioremediation of aromatic pollutant-contaminated anaerobic sites.

Microbial bioremediation of produced water under different redox conditions in marine sediments

The discharge of produced water from offshore oil platforms is an emerging concern due to its potential adverse effects on marine ecosystems. In this study, we investigated the feasibility and capability of using marine sediments for the bioremediation of produced water. We utilized a combination of porewater and solid phase analysis in a series of sediment batch incubations amended with produced water and synthetic produced water to determine the biodegradation of hydrocarbons under different redox conditions. Significant removal of benzene, toluene, ethylbenzene and xylene (BTEX) compounds was observed under different redox conditions, with biodegradation efficiencies of 93-97% in oxic incubations and 45-93% in anoxic incubations with nitrate, iron oxide or sulfate as the electron acceptor. Higher biodegradation rates of BTEX were obtained by incubations dominated by nitrate reduction (104-149 nmolC/cm³/d) and oxygen respiration (52-57 nmolC/cm³/d), followed by sulfate reduction (14-76 nmolC/cm³/d) and iron reduction (29-39 nmolC/cm³/d). Chemical fingerprint analysis showed that hydrocarbons were biodegraded to smaller alcohols/acids under oxic conditions compared to anoxic conditions with nitrate, indicating that the presence of oxygen facilitated a more complete biodegradation process. Toxicity of treated produced water to the marine copepod Acartia tonsa was reduced by half after sediment incubations with oxygen and nitrate. Our study emphasizes the possibility to use marine sediment as a biofilter for treating produced water at sea without extending the oil and gas platform or implementing a large-scale construction.