Size of TiO(2) nanoparticles influences their phototoxicity: an in vitro investigation

Nanomaterials-Induced Redox Imbalance: Challenged and Opportunities for Nanomaterials in Cancer Therapy

Cancer cells typically display redox imbalance compared with normal cells due to increased metabolic rate, accumulated mitochondrial dysfunction, elevated cell signaling, and accelerated peroxisomal activities. This redox imbalance may regulate gene expression, alter protein stability, and modulate existing cellular programs, resulting in inefficient treatment modalities. Therapeutic strategies targeting intra- or extracellular redox states of cancer cells at varying state of progression may trigger programmed cell death if exceeded a certain threshold, enabling therapeutic selectivity and overcoming cancer resistance to radiotherapy and chemotherapy. Nanotechnology provides new opportunities for modulating redox state in cancer cells due to their excellent designability and high reactivity. Various nanomaterials are widely researched to enhance highly reactive substances (free radicals) production, disrupt the endogenous antioxidant defense systems, or both. Here, the physiological features of redox imbalance in cancer cells are described and the challenges in modulating redox state in cancer cells are illustrated. Then, nanomaterials that regulate redox imbalance are classified and elaborated upon based on their ability to target redox regulations. Finally, the future perspectives in this field are proposed. It is hoped this review provides guidance for the design of nanomaterials-based approaches involving modulating intra- or extracellular redox states for cancer therapy, especially for cancers resistant to radiotherapy or chemotherapy, etc.

EGFR targeted albumin nanoparticles of oleanolic acid: In silico screening of nanocarrier, cytotoxicity and pharmacokinetics for lung cancer therapy

This study aimed to develop cetuximab (CTX) functionalized albumin nanoparticles (ALB-NPs) of oleanolic acid for EGFR targeted lung cancer therapy. The molecular docking methodology has been applied for a selection of suitable nanocarrier. Various physicochemical parameters like particle size, polydispersity, zeta potential, morphology, entrapment efficiency, and in-vitro drug release of all the ALB-NPs were analyzed. Furthermore, the in-vitro qualitative and quantitative cellular uptake study revealed that higher uptake of CTX conjugated ALB-NPs than nontargeted ALB-NPs in A549 cells. The in-vitro MTT assay revealed that the IC50 value of CTX-OLA-ALB-NPs (4.34 ± 1.90 μg/mL) was significantly reduced (p < 0.001) than OLA-ALB-NPs (13.87 ± 1.28 μg/mL) in A-549 cells. CTX-OLA-ALB-NPs caused apoptosis in A-549 cells at concentrations equivalent to its IC50 value and blocked the cell cycle in the G0/G1 phases. The hemocompatibility, histopathology and lung safety study confirmed the biocompatibility of the developed NPs. In vivo ultrasound and photoacoustic imaging confirmed the targeted delivery of the NPs to lung cancer. The findings demonstrated that CTX-OLA-ALB-NPs have potential for site-specific delivery of OLA for effective and targeted therapy of lung carcinoma.

Harmonizing nanomaterial exposure methodologies in ecotoxicology: the effects of two innovative nanoclays in the freshwater microalgae Raphidocelis subcapitata

Layered double hydroxides (LDHs) are innovative nanomaterials (NMs) with a typical nanoclay structure (height <40 nm) consisting of layers of metallic cations and hydroxides stabilized by anions and water molecules. Upon specific triggers, anions can exchange by others in the surrounding environment. Due to this stimuli-responsive behavior, LDHs are used as carriers of active ingredients in the industrial or pharmaceutical sectors. Available technical guidelines to evaluate the ecotoxicity of conventional substances do not account for the specificities of NMs, leading to inaccuracies and uncertainty. The present study aimed to assess two different exposure methodologies (serial dilutions of the stock dispersion vs. direct addition of NM powder to each concentration) on the ecotoxicological profile of different powder grain sizes of Zn-Al LDH-NO3 and Cu-Al LDH-NO3 (bulk, <25, 25-63, 63-125, 125-250, and >250 µm) in the growth of the freshwater microalgae Raphidocelis subcapitata. Results revealed that the serial dilutions methodology was preferable for Zn-Al LDH-NO3, whereas for Cu-Al LDH-NO3 both methodologies were suitable. Thus, the serial dilutions methodology was selected to assess the ecotoxicity of different grain sizes for both LDHs. All Zn-Al LDH-NO3 grain sizes yielded similar toxicity, while Cu-Al LDH-NO3 powders with smaller grain sizes caused a higher effect on microalgae growth; thus, grain size separation might be advantageous for future applications of Cu-Al LDH-NO3s. Considering the differences between exposure methodologies for the Zn-Al LDH-NO3, further research involving other NMs and species must be carried out to achieve harmonization and validation for inter-laboratory comparison.

MRC-5 Human Lung Fibroblasts Alleviate the Genotoxic Effect of Fe-N Co-Doped Titanium Dioxide Nanoparticles through an OGG1/2-Dependent Reparatory Mechanism

The current study was focused on the potential of pure P25 TiO2 nanoparticles (NPs) and Fe(1%)-N co-doped P25 TiO2 NPs to induce cyto- and genotoxic effects in MRC-5 human pulmonary fibroblasts. The oxidative lesions of P25 NPs were reflected in the amount of 8-hydroxydeoxyguanosine accumulated in DNA and the lysosomal damage produced, but iron-doping partially suppressed these effects. However, neither P25 nor Fe(1%)-N co-doped P25 NPs had such a serious effect of inducing DNA fragmentation or activating apoptosis signaling. Moreover, oxo-guanine glycosylase 1/2, a key enzyme of the base excision repair mechanism, was overexpressed in response to the oxidative DNA deterioration induced by P25 and P25-Fe(1%)-N NPs.

Influence of TiO2 nanocomposite UV filter surface chemistry and their interactions with organic UV filters on uptake and toxicity toward cultured fish gill cells

Aquatic environments have been found to be contaminated with a variety of inorganic and organic UV filters. This includes novel nano-sized titanium dioxide (TiO₂) composite particles, which have been increasingly developed and incorporated into commercial sunscreens in recent years. So far, relatively little is known about the effects of this novel class of UV filters on aquatic life. Therefore, this study aimed to determine and compare the toxicity of three such nanoparticulate TiO₂ UV filters with different surface coatings, namely Eusolex® T-Avo (SiO₂-coated), T-Lite™ SF (Al(OH)₃/PDMS-coated), and Eusolex® T-S (Al₂O₃/stearic acid-coated) either alone, or in the presence of selected organic UV filters (octinoxate, avobenzone, octocrylene), toward fish using RTgill-W1 cell cultures as an in vitro experimental model. Besides standard exposure protocols, alternative approaches (i.e., exposure to water accommodated fractions (WAFs), hanging-drop exposure) were explored to account for nanoparticle (NP)-specific fate in the medium and obtain additional/complementary information on their toxicity in different conditions. The AlamarBlue, CFDA-AM and Neutral Red Retention (NR) assays were used to measure effects on different cellular endpoints. Transmission electron microscopy (TEM) was used to examine NP uptake. Our results showed that none of the TiO₂ NP UV filters were cytotoxic at the concentrations tested (0.1-10 µg/mL; 24 h) but there were differences in their uptake by the cells. Thus, only the hydrophilic T-AVO was detected inside cells, but the hydrophobic T-Lite SF and T-S were not. In addition, our results show that the presence of NPs (or the used dispersant) tended to decrease organic UV filter toxicity. The level of combination effect depended on both NP-type (surface chemistry) and concentration, suggesting that the reduced toxicity resulted from reduced availability of the organic UV filters due to their adsorption to the NP surface. Thus, mixtures of TiO₂ NP UV filters and organic UV filters may have a different toxicological profile compared to the single substances, but probably do not pose an increased hazard.

Evaluation of TiO2 Nanoparticles Physicochemical Parameters Associated with their Antimicrobial Applications

Titanium dioxide nanoparticles (TiO2NPs) usage is increasing in everyday consumer products, hence, assessing their toxic impacts on living organisms and environment is essential. Various studies have revealed the significant role of TiO2NPs physicochemical properties on their toxicity. However, TiO2NPs are still poorly characterized with respect to their physicochemical properties, and environmental factors influencing their toxicity are either ignored or are too complex to be assessed under laboratory conditions. The outcomes of these studies are diverse and inconsistent due to lack of standard protocols. TiO2NPs toxicity also differs for in vivo and in vitro systems, which must also be considered during standardization of protocols to maintain uniformity and reproducibility of results. This review critically evaluates impact of different physicochemical parameters of TiO2NPs and other experimental conditions, employed in different laboratories in determining their toxicity towards bacteria. These important observations may be helpful in evaluation of environmental risks posed by these nanoparticles and this can further assist regulatory bodies in policymaking.

Industrial-relevant TiO2 types do not promote cytotoxicity in the A549 or TK6 cell lines regardless of cell specific interaction

Due to the expansive application of TiO₂ and its variance in physico-chemical characteristics, the toxicological profile of TiO₂, in all its various forms, requires evaluation. This study aimed to assess the hazard of five TiO₂ particle-types in relation to their cytotoxic profile correlated to their cellular interaction, specifically in human lymphoblast (TK6) and type-II alveolar epithelial (A549) cells. Treatment with the test materials was undertaken at a concentration range of 1-100 μg/cm² over 24 and 72 h exposure. TiO₂ interaction with both cell types was visualised by transmission electron microscopy, supported by energy-dispersive X-ray. None of the TiO₂ materials tested promoted cytotoxicity in either cell type over the concentration and time range studied. All materials were observed to interact with the A549 cells and were further noted to be internalised following 24 h exposure. In contrast, only the pigmentary rutile was internalised by TK6 lymphoblasts after 24 h exposure. Where uptake was observed there was no evidence, as determined by 2D microscopy techniques, of particle localisation within the nucleus of either cell type. This study indicates that industrially relevant TiO₂ particles demonstrate cell interactions that are cell-type dependent and do not induce cytotoxicity at the applied dose range.

Analyzing the TiO2surface reactivity based on oxygen vacancies computed by DFT and DFTB methods

Titanium dioxide is a key material in many fields, including technological, industrial and biomedical applications. Many of these applications are related to the surface reactivity of TiO₂and involve its reducibility properties. Recently titania has been banned as a food additive due to its (nano)toxicity, and the release of reactive oxygen species plays a crucial role in many toxicological mechanisms. Determining chemical descriptors that account for the extension of reduction is necessary to understand such processes and necessary for predicting the reactivity of an unknown system. In the present work, we compute a set of chemical descriptors for selected surfaces of anatase and rutile TiO₂. The aim is twofold: we want to provide chemically meaningful information on the surface reactivity, and benchmark the descriptors for twoab initioschemes. To do so, we compute the oxygen vacancy formation energy, and the corresponding electronic structure, in four slab models with two different computational schemes (DFT+Uand DFTB). In this way, we characterize the robustness of the dataset, with the purpose of scaling up to more realistic model systems such as nanoparticles or explicit solvent, which are too computationally demanding for state-of-the-art density functional theory approaches.

Comparison of globular albumin methacryloyl and random-coil gelatin methacryloyl: Preparation, hydrogel properties, cell behaviors, and mineralization

Bovine serum albumin methacryloyl (BSAMA) is a newly emerging photocurable globular protein-based material whereas gelatin methacryloyl (GelMA) is one of the most popular photocurable fibrous protein-based materials. So far, the influence of their different structural conformations as building blocks on hydrogel properties and mineral deposition has not been investigated. Here, we compared their differences in structures, gelation kinetics, hydrogel properties, mineralization, and cell behaviors. BSAMA maintained a stable globular structure while GelMA exhibited temperature-sensitive conformations (4 - 37 °C). BSAMA displayed slower gelation kinetics and much more retarded enzymatic degradation compared to GelMA. Photocurable BSAMA (6.41 - 390.95 kPa) and GelMA hydrogels (36.09 - 199.70 kPa) exhibited tunable mechanical properties depending on their concentrations (10 - 20%). Interestingly, BSAMA hydrogels mineralized needle-like apatite (Ca/P: 1.409) with higher crystallinity compared to GelMA hydrogels (Ca/P: 1.344). BSAMA and GelMA supported satisfactory cell (MC3T3-L1) viability of 99.43 ± 0.57% and 97.14 ± 0.69%, respectively. However, BSAMA gels were less favorable to cell proliferation and migration than GelMA gels. In serum-free environments, cells on GelMA displayed a higher amount of attachment, a more elongated shape, and a longer protrusion compared to those on BSAMA (p < 0.01) during the early adhesion.

The role of nanoparticles (titanium dioxide, graphene oxide) on the inactivation of co-existing bacteria in the presence and absence of quartz sand

The increased mass production and application of engineered nanomaterials (ENMs) have resulted in the release of nanoparticles (NPs) in the environment, raising uncertainties regarding their environmental impacts. This study examines the effect of graphene oxide (GO) and titanium dioxide (TiO₂) NPs on the inactivation of the three model bacteria originated by mammalians including humans: Escherichia (E.) coli, Enterococcus (E.) faecalis, and Staphylococcus (S.) aureus. A series of dynamic batch experiments were conducted at constant room temperature (22 °C) in order to examine the inactivation of co-existing bacteria by NPs, in the presence and absence of quartz sand. The inactivation experimental data were satisfactorily fitted with a pseudo-first order expression with a time dependent rate coefficient. The inactivation of E. coli and S. aureus was shown to increase in the co-presence of GO or TiO₂ NPs and quartz sand comparing with the presence of GO or TiO₂ NPs alone. For E. faecalis, no clear trend was observed. Moreover, quartz sand was shown to affect inactivation of bacteria by GO and TiO₂ NPs. Among the bacteria examined, the highest inactivation rates were observed for S. aureus.

Advances in genotoxicity of titanium dioxide nanoparticles in vivo and in vitro

Titanium dioxide nanoparticles (TiO₂ NPs) are currently one of the most widely used nanomaterials. Due to an increasing scope of applications, the exposure of humans to TiO₂ NP is inevitable, such as entering the body through the mouth with food additives or drugs, invading the damaged skin with cosmetics, and entering the body through the respiratory tract during the process of production and handling. Compared with TiO₂ coarse particles, TiO₂ NPs have stronger conductivity, reaction activity, photocatalysis, and permeability, which may lead to greater toxicity to organisms. Given that TiO₂ was classified as a category 2B carcinogen (possibly carcinogenic to humans), the genotoxicity of TiO₂ NPs has become the focus of attention. There have been a series of previous studies investigating the potential genotoxicity of TiO₂ NPs, but the existing research results are still controversial and difficult to conclude. More than half of studies have shown that TiO₂ NPs can cause genotoxicity, suggesting that TiO₂ NPs are likely to be genotoxic to humans. And the genotoxicity of TiO₂ NPs is closely related to the exposure concentration, mode and time, and experimental cells/animals as well as its physicochemical properties (crystal type, size, and shape). This review summarized the latest research progress of related genotoxic effects through in vivo studies and in vitro cell tests, hoping to provide ideas for the evaluation of TiO₂ NPs genotoxicity.

Factors Conditioning the Potential Effects TiO2 NPs Exposure on Human Microbiota: a Mini-Review

The recent years have seen a significant interest in the applications of nanotechnology in various facets of our lives. Due to their increasingly widespread use, human exposure to nanoparticles (NPs) is fast becoming unavoidable. Among the wide group of nanoparticles currently employed in industry, titanium dioxide nanoparticles, TiO₂ NPs, are particularly popular. Due to its white colour, TiO₂ is widely used as a whitening food additive (E 171). Yet, there have been few studies aimed at determining its direct impact on bacteria, while the available data suggest that TiO₂ NPs may influence microbiota causing problems such as inflammatory bowel disease, obesity, or immunological disorders. Indeed, there are increasing concerns that its presence may lead to intestinal barrier impairment, including dysbiosis of intestinal microbiota. This article aims to present an overview of studies conducted to date with regard to the impact of TiO₂ NPs on human microbiota as well as factors that can affect the same. Such information is necessary if we are to conclusively determine the potential toxicity of inorganic nanoparticles.

Comparative Photo-Electrochemical and Photocatalytic Studies with Nanosized TiO2 Photocatalysts towards Organic Pollutants Oxidation

The size of TiO2 can significantly affect both its photocatalytic and photo-electrochemical properties, thus altering the photooxidation of organic pollutants in air or water. In this work, we give an account of the photo-electrochemical and photocatalytic features of some nanosized TiO2 commercial powders towards a model reaction, the photooxidation of acetone. Cyclic voltammograms (CV) of TiO2 particulate electrodes under UV illumination experiments were carried out in either saturated O2 or N2 solutions for a direct correlation with the photocatalytic process. In addition, the effect of different reaction conditions on the photocatalytic efficiency under UV light in both aqueous and gaseous phases was also investigated. CV curves with the addition of acetone under UV light showed a negative shift of the photocurrent onset, confirming the efficient transfer of photoproduced reactive oxygen species (ROSs), e.g., hydroxyl radicals or holes to acetone molecules. The photocatalytic experiments showed that the two nano-sized samples exhibit the best photocatalytic performance. The different photoactivity of the larger-sized samples is probably attributed to their morphological differences, affecting both the amount and distribution of free ROSs involved in the photooxidation reaction. Finally, a direct correlation between the photocatalytic measurements in gas phase and the photo-electrochemical measurements in aqueous phase is given, thus evincing the important role of the substrate-surface interaction with similar acetone concentrations.

Short Preirradiation of TiO2 Nanoparticles Increases Cytotoxicity on Human Lung Coculture System

Anatase titanium dioxide nanoparticles (TiO₂ NPs) are used in a large range of industrial applications mainly due to their photocatalytic properties. Before entering the lung, virtually all TiO₂ NPs are exposed to some UV light, and lung toxicity of TiO₂ NPs might be influenced by photoexcitation that is known to alter TiO₂ surface properties. Although the TiO₂ NPs toxicity has been extensively investigated, limited data are available regarding the toxicity of TiO₂ NPs that have been pre-exposed to UV light, and their impact on humans remains unknown. In this study, five types of TiO₂NPs with tailored physicochemical features were characterized and irradiated by UV for 30 min. Following irradiation, cytotoxicity, pro-inflammatory response, and oxidative stress on a human lung coculture system (A549 epithelial cells and macrophages differentiated from THP-1 cells) were assessed. The surface charge of all samples was less negative after UV irradiation of TiO₂ NPs, and the average aggregate size was slightly increased. A higher cytotoxic effect was observed for preirradiated TiO₂ NPs compared to nonirradiated samples. Preirradiation of TiO₂ NPs had no significant impact on the pro-inflammatory response and oxidative stress as shown by a similar production of IL-8, TNF-α, and reactive oxygen species.

Possible Adverse Effects of Food Additive E171 (Titanium Dioxide) Related to Particle Specific Human Toxicity, Including the Immune System

Titanium dioxide (TiO₂) is used as a food additive (E171) and can be found in sauces, icings, and chewing gums, as well as in personal care products such as toothpaste and pharmaceutical tablets. Along with the ubiquitous presence of TiO₂ and recent insights into its potentially hazardous properties, there are concerns about its application in commercially available products. Especially the nano-sized particle fraction (<100 nm) of TiO₂ warrants a more detailed evaluation of potential adverse health effects after ingestion. A workshop organized by the Dutch Office for Risk Assessment and Research (BuRO) identified uncertainties and knowledge gaps regarding the gastrointestinal absorption of TiO₂, its distribution, the potential for accumulation, and induction of adverse health effects such as inflammation, DNA damage, and tumor promotion. This review aims to identify and evaluate recent toxicological studies on food-grade TiO₂ and nano-sized TiO₂ in ex-vivo, in-vitro, and in-vivo experiments along the gastrointestinal route, and to postulate an Adverse Outcome Pathway (AOP) following ingestion. Additionally, this review summarizes recommendations and outcomes of the expert meeting held by the BuRO in 2018, in order to contribute to the hazard identification and risk assessment process of ingested TiO₂.

Nanomedicine: Photo-activated nanostructured titanium dioxide, as a promising anticancer agent

The multivariate condition of cancer disease has been approached in various ways, by the scientific community. Recent studies focus on individualized treatments, minimizing the undesirable consequences of the conventional methods, but the development of an alternative effective therapeutic scheme remains to be held. Nanomedicine could provide a solution, filling this gap, exploiting the unique properties of innovative nanostructured materials. Nanostructured titanium dioxide (TiO₂) has a variety of applications of daily routine and of advanced technology. Due to its biocompatibility, it has also a great number of biomedical applications. It is now clear that photo-excited TiO₂ nanoparticles, induce generation of pairs of electrons and holes which react with water and oxygen to yield reactive oxygen species (ROS) that have been proven to damage cancer cells, triggering controlled cellular processes. The aim of this review is to provide insights into the field of nanomedicine and particularly into the wide context of TiO₂-NP-mediated anticancer effect, shedding light on the achievements of nanotechnology and proposing this nanostructured material as a promising anticancer photosensitizer.

Transformation of Nanomaterials and Its Implications in Gut Nanotoxicology

Ingestion of engineered nanomaterials (ENMs) is inevitable due to their widespread utilization in the agrifood industry. Safety evaluation has become pivotal to identify the consequences on human health of exposure to these ingested ENMs. Much of the current understanding of nanotoxicology in the gastrointestinal tract (GIT) is derived from studies utilizing pristine ENMs. In reality, agrifood ENMs interact with their microenvironment, and undergo multiple physicochemical transformations, such as aggregation/agglomeration, dissolution, speciation change, and surface characteristics alteration, across their life cycle from synthesis to consumption. This work sieves out the implications of ENM transformations on their behavior, stability, and reactivity in food and product matrices and through the GIT, in relation to measured toxicological profiles. In particular, a strong emphasis is given to understand the mechanisms through which these transformations can affect ENM induced gut nanotoxicity.

Isolation methods for particle protein corona complexes from protein-rich matrices

Background: Nanoparticles become rapidly encased by a protein layer when they are in contact with biological fluids. This protein shell is called a corona. The composition of the corona has a strong influence on the surface properties of the nanoparticles. It can affect their cellular interactions, uptake and signaling properties. For this reason, protein coronae are investigated frequently as an important part of particle characterization. Main body of the abstract: The protein corona can be analyzed by different methods, which have their individual advantages and challenges. The separation techniques to isolate corona-bound particles from the surrounding matrices include centrifugation, magnetism and chromatographic methods. Different organic matrices, such as blood, blood serum, plasma or different complex protein mixtures, are used and the approaches vary in parameters such as time, concentration and temperature. Depending on the investigated particle type, the choice of separation method can be crucial for the subsequent results. In addition, it is important to include suitable controls to avoid misinterpretation and false-positive or false-negative results, thus allowing the achievement of a valuable protein corona analysis result. Conclusion: Protein corona studies are an important part of particle characterization in biological matrices. This review gives a comparative overview about separation techniques, experimental parameters and challenges which occur during the investigation of the protein coronae of different particle types.

Metal nanomaterials: Immune effects and implications of physicochemical properties on sensitization, elicitation, and exacerbation of allergic disease

The recent surge in incorporation of metallic and metal oxide nanomaterials into consumer products and their corresponding use in occupational settings have raised concerns over the potential for metals to induce size-specific adverse toxicological effects. Although nano-metals have been shown to induce greater lung injury and inflammation than their larger metal counterparts, their size-related effects on the immune system and allergic disease remain largely unknown. This knowledge gap is particularly concerning since metals are historically recognized as common inducers of allergic contact dermatitis, occupational asthma, and allergic adjuvancy. The investigation into the potential for adverse immune effects following exposure to metal nanomaterials is becoming an area of scientific interest since these characteristically lightweight materials are easily aerosolized and inhaled, and their small size may allow for penetration of the skin, which may promote unique size-specific immune effects with implications for allergic disease. Additionally, alterations in physicochemical properties of metals in the nano-scale greatly influence their interactions with components of biological systems, potentially leading to implications for inducing or exacerbating allergic disease. Although some research has been directed toward addressing these concerns, many aspects of metal nanomaterial-induced immune effects remain unclear. Overall, more scientific knowledge exists in regards to the potential for metal nanomaterials to exacerbate allergic disease than to their potential to induce allergic disease. Furthermore, effects of metal nanomaterial exposure on respiratory allergy have been more thoroughly-characterized than their potential influence on dermal allergy. Current knowledge regarding metal nanomaterials and their potential to induce/exacerbate dermal and respiratory allergy are summarized in this review. In addition, an examination of several remaining knowledge gaps and considerations for future studies is provided.

Differential in vivo hemocyte responses to nano titanium dioxide in mussels: Effects of particle size

Titanium dioxide nanoparticles (TiO₂ NPs) are widely used in various products and inevitably released with different sizes and forms into aquatic environment. The purpose of this study was to assess the differential immune toxicity of TiO₂ NPs with size difference on mussel hemocytes using flow cytometry (FCM) assays. Hemocyte parameters, including total hemocyte count (THC), hemocyte mortality (HM), phagocytosis activity (PA), lysosomal content (LC), esterase activity (EA), mitochondrial number (MN), mitochondrial membrane potential (MMP) and reactive oxygen species content (ROS) were evaluated in the mussels Mytilus coruscus exposed to two types of TiO₂ NPs (25nm & 100nm: 0.1, 1, 10 mg/L, respectively). In general, size- and concentration-dependent toxicity was pronounced with 25nm-NP and highest concentration (10mg/L) being the most toxic. Alhough a slight recovery from the TiO₂ exposure was observed, significant carry-over effects were still detected. These results highlight the importance of differential size effects of metal oxide NPs on toxicity mechanisms in aquatic animals.

Bio-interactions and risks of engineered nanoparticles

Nano technological research offered uncountable opportunities for engineered nanoparticles (ENPs) in the field of biomedical, pharmaceutical, agricultural, cosmetics, textiles, automobiles and electronic industry. Large scale commercial production and use of nanoparticles with smaller size and characteristic physico-chemical properties enhance the possibility of amenable toxicity to the environment. Primary important species of the ecosystem like bacteria, algae, fishes and plants are at high risk with nanoparticle (NP) toxicity. ENP distributed in air, water and soil can directly affect the livelihood or even the existence of smaller organisms. In day-today life, human beings are getting exposed to thousands of NPs via dermal contact, inhalation or ingestion. Topical application of sunscreens and cosmetics containing ENPs has the potential to induce photo toxicity under ultra violet irradiation. ENP intentionally or non-intentionally enter into the body will affect the entire organ system and execute their toxicity even in reproduction and fetal developmental stages. Unfortunately the existing researches to evaluate the in vivo and in vitro toxic effects of ENPs are inefficient to give the exact nature and depth of toxicity. Hence an effort was made to discuss on the characteristics, classification, synthesis, applications and toxic potentials of various classes of commercially relevant ENPs along with a detailed review on currently available literatures.

Surface Design of Eu-Doped Iron Oxide Nanoparticles for Tuning the Magnetic Relaxivity

Relaxivity tuning of nanomaterials with the intrinsic T₁- T₂ dual-contrast ability has great potential for MRI applications. Until now, the relaxivity tuning of T₁ and T₂ dual-modal MRI nanoprobes has been accomplished through the dopant, size, and morphology of the nanoprobes, leaving room for bioapplications. However, a surface engineering method for the relaxivity tuning was seldom reported. Here, we report the novel relaxivity tuning method based on the surface engineering of dual-mode T₁- T₂ MRI nanoprobes (DMNPs), along with protein interaction monitoring with the DMNPs as a potential biosensor application. Core nanoparticles (NPs) of europium-doped iron oxide (EuIO) are prepared by a thermal decomposition method. As surface materials, citrate (Cit), alendronate (Ale), and poly(maleic anhydride- alt-1-octadecene)/poly(ethylene glycol) (PP) are employed for the relaxivity tuning of the NPs based on surface engineering, resulting in EuIO-Cit, EuIO-Ale, and EuIO-PP, respectively. The key achievement of the current study is that the surface materials of the DMNP have significant impacts on the r₁ and r₂ relaxivities. The correlation between the hydrophobicity of the surface material and longitudinal relaxivity ( r₁) of EuIO NPs presents an exponential decay feature. The r₁ relaxivity of EuIO-Cit is 13.2-fold higher than that of EuIO-PP. EuIO can act as T₁- T₂ dual-modal (EuIO-Cit) or T₂-dominated MRI contrast agents (EuIO-PP) depending on the surface engineering. The feasibility of using the resulting nanosystem as a sensor for environmental changes, such as albumin interaction, was also explored. The albumin interaction on the DMNP shows both T₁ and T₂ relaxation time changes as mutually confirmative information. The relaxivity tuning approach based on the surface engineering may provide an insightful strategy for bioapplications of DMNPs and give a fresh impetus for the development of novel stimuli-responsive MRI nanoplatforms with T₁ and T₂ dual-modality for various biomedical applications.

Horizontally rotating disc recirculated photoreactor with TiO2-P25 nanoparticles immobilized onto a HDPE plate for photocatalytic removal of p-nitrophenol

In this study, a horizontally rotating disc recirculated (HRDR) photoreactor equipped with two UV lamps (6 W) was designed and fabricated for photocatalytic removal of p-nitrophenol (PNP). Photocatalyst (TiO₂) nanoparticles were immobilized onto a high-density polyethylene (HDPE) disc, and PNP containing solution was allowed to flow (flow rate of 310 mL min^-1) in radial direction along the surface of the rotating disc illuminated with UV light. The efficiency of direct photolysis and photocatalysis and the effect of rotating speed on the removal of PNP were studied in the HRDR photoreactor. It was found that TiO₂-P25 nanoparticles are needed for the effective removal of PNP and there was an optimum rotating speed (450 rpm) for the efficient performance of the HRDR photoreactor. Then effects of operational variables on the removal efficiency were optimized using response surface methodology. The results showed that the predicted values of removal efficiency are consistent with experimental results with an R₂ of 0.9656. Optimization results showed that maximum removal percent (82.6%) was achieved in the HRDR photoreactor at the optimum operational conditions. Finally, the reusability of the HRDR photoreactor was evaluated and the results showed high reusability and stability without any significant decrease in the photocatalytic removal efficiency.

ZnO Nanopillar Coated Surfaces with Substrate-Dependent Superbactericidal Property

ZnO nanopillars coated on various surfaces are able to kill adhered bacteria and fungi due to their physical structure through a rupturing mechanism. Remarkably, zinc foil and galvanized steel surfaces with ZnO nanopillar coatings demonstrate an excellent remote bacteria-killing property. Their bacterial killing efficacy is several orders higher than ZnO nanopillars coated on other surfaces as well as ZnO nanoparticles themselves. Mechanistic study shows that the nanostructure surface kills adhered microbial cells by rupturing the cell wall, while superoxide (^• O₂^- ) released from the ZnO coating with electrons donated from zinc via the Zn/ZnO interface rather than photoirritation is responsible for the superior remote killing. The results of this study represent a novel mechanism of surface disinfection and its application in water disinfection is also demonstrated.

JAK/STAT and TGF-ß activation as potential adverse outcome pathway of TiO2NPs phototoxicity in Caenorhabditis elegans

Titanium dioxide nanoparticles (TiO₂NPs) are widely used nanoparticles, whose catalytic activity is mainly due to photoactivation. In this study, the toxicity of TiO₂NPs was investigated on the nematode Caenorhabditis elegans, with and without UV activation. Comparative analyses across the four treatments revealed that UV-activated TiO₂NPs led to significant reproductive toxicity through oxidative stress. To understand the underlying molecular mechanism, transcriptomics and metabolomics analyses were conducted, followed by whole-genome network-based pathway analyses. Differential expression analysis from microarray data revealed only 4 DEGs by exposure to TiO₂NPs alone, compared to 3,625 and 3,286 DEGs by UV alone and UV-activated TiO₂NPs, respectively. Pathway analyses suggested the possible involvement of the JAK/STAT and TGF-ß pathways in the phototoxicity of TiO₂NPs, which correlated with the observation of increased gene expression of those pathways. Comparative analysis of C. elegans response across UV activation and TiO₂NPs exposure was performed using loss-of-function mutants of genes in these pathways. Results indicated that the JAK/STAT pathway was specific to TiO₂NPs, whereas the TGF-ß pathway was specific to UV. Interestingly, crosstalk between these pathways was confirmed by further mutant analysis. We consider that these findings will contribute to understand the molecular mechanisms of toxicity of TiO₂NPs in the natural environment.

Immune and reproductive system impairment in adult sea urchin exposed to nanosized ZnO via food

In marine environment the release and the consequent sedimentation of ZnO NPs, mainly used in sunscreens, could provoke toxic effects in particular in grazer organisms, like sea urchins. In this work, a first evaluation of DNA and cellular effects on adult sea urchins Paracentrotus lividus exposed through the diet to different sizes (100 and 14nm) ZnO NPs, was performed. Moreover, the consequent impact upon offspring quality was evaluated. Preliminarily results showed that the assumption of food containing ZnO NPs 100nm provoked in adult echinoids damages to immune cells (33% of damaged nucleus) and transmissible effects to offspring (75.5% of malformed larvae). Instead food with ZnO NPs 14nm provoked 64% of damaged nucleus in immune cells and 84.7% of malformed larvae.

Sonocatalytic degradation of ciprofloxacin using synthesized TiO2 nanoparticles on montmorillonite

TiO₂/Montmorillonite (TiO₂/MMT) nanocomposite as sonocatalyst was produced by immobilizing synthesized TiO₂ on the surface of montmorillonite. The characteristics of produced nanocomposite were investigated using XRD, XRF, FTIR, TEM, SEM, EDX, UV-vis DRS and nitrogen adsorption-desorption analyses. The synthesized TiO₂ and TiO₂/MMT samples were applied as catalysts for sonocatalytic degradation of ciprofloxacin (CIP). The performance of the TiO₂/MMT was greater than pure TiO₂ sample in treatment of CIP solution. The degradation efficiency of the CIP by sonocatalytic process was affected by solution pH, catalyst dosage, initial CIP concentrations and ultrasonic power. Degradation efficiency of 65.01% was obtained at the pH of 6, catalyst dosage of 0.2gL^-1, initial CIP concentration of 10mgL^-1 and ultrasonic power of 650WL^-1. It was observed that the presence of inorganic and organic scavengers suppressed the performance of sonocatalytic process. The stability of the nanocomposite was studied in several successive experiments, and the degradation efficiency declined only 61.48% after 4 repeated experiments. The main degradation by-products were recognized by GC-MS method to propose the possible sonocatalytic mechanism for the degradation of CIP.

Genotoxicity of TiO2 nanoparticles assessed by mini-gel comet assay and micronucleus scoring with flow cytometry

The widespread production and use of nanoparticles calls for faster and more reliable methods to assess their safety. The main aim of this study was to investigate the genotoxicity of three reference TiO₂ nanomaterials (NM) within the frame of the FP7-NANoREG project, with a particular focus on testing the applicability of mini-gel comet assay and micronucleus (MN) scoring by flow cytometry. BEAS-2B cells cultured under serum-free conditions were exposed to NM100 (anatase, 50–150nm), NM101 (anatase, 5–8nm) and NM103 (rutile, 20–28nm) for 3, 24 or 48h mainly at concentrations 1–30 μg/ml. In the mini-gel comet assay (eight gels per slide), we included analysis of (i) DNA strand breaks, (ii) oxidised bases (Fpg-sensitive sites) and (iii) light-induced DNA damage due to photocatalytic activity. Furthermore, MN assays were used and we compared the results of more high-throughput MN scoring with flow cytometry to that of cytokinesis-block MN cytome assay scored manually using a microscope. Various methods were used to assess cytotoxic effects and the results showed in general no or low effects at the doses tested. A weak genotoxic effect of the tested TiO₂ materials was observed with an induction of oxidised bases for all three materials of which NM100 was the most potent. When the comet slides were briefly exposed to lab light, a clear induction of DNA strand breaks was observed for the anatase materials, but not for the rutile. This highlights the risk of false positives when testing photocatalytically active materials if light is not properly avoided. A slight increase in MN formation for NM103 was observed in the different MN assays at the lower doses tested (1 and 5 μg/ml). We conclude that mini-gel comet assay and MN scoring using flow cytometry successfully can be used to efficiently study cytotoxic and genotoxic properties of nanoparticles.

Ultrasonic-assisted synthesis of Ce doped cubic-hexagonal ZnTiO3 with highly efficient sonocatalytic activity

Ce doped ZnTiO3 as a novel catalyst with highly efficient and stable sonocatalytic activity was synthesized via an ultrasound-assisted sol-gel method using non-ionic surfactant Pluronic F127 as structure directing agent. Synthesized samples were characterized by using various techniques, such as XRD, TEM, SEM, EDX, ​XRF, BET, DRS, and PL, and their sonocatalytic activity studied toward degradation of p-Nitrophenol as a model organic compound. The synthesized mesoporous Ce/ZnTiO3 had mixed cubic-hexagonal phase with large surface area (118.2 m(2) g(-1)) and narrow pore size distribution (4.9 nm). The effects of cerium concentration, calcination temperature, and calcination time on the structure and the sonocatalytic activity of Ce/ZnTiO3 were studied in detail. XRD results were suggested that the relation between the phase structure and the catalytic activity is considerable. Significant decrease in band-gap and PL intensity was observed with increasing the cerium concentration in the ZnTiO3. It became clear that the Ce/ZnTiO3 (0.81 mol%) shows high sonocatalytic activity compared with pure ZnTiO3 and other Ce/ZnTiO3 samples as well as commercial TiO2-P25. The possible mechanism for the enhanced sonocatalytic activity of Ce/ZnTiO3 was discussed in details. The electrical energy consumption was also considered during sonocatalytic experiments.

Ultrasonic-assisted degradation of phenazopyridine with a combination of Sm-doped ZnO nanoparticles and inorganic oxidants

Pure and samarium doped ZnO nanoparticles were synthesized by a sonochemical method and characterized by TEM, SEM, EDX, XRD, Pl, and DRS techniques. The average crystallite size of pure and Sm-doped ZnO nanoparticles was about 20 nm. The sonocatalytic activity of pure and Sm-doped ZnO nanoparticles was considered toward degradation of phenazopyridine as a model organic contaminant. The Sm-doped ZnO nanoparticles with Sm concentration of 0.4 mol% indicated a higher sonocatalytic activity (59%) than the pure ZnO (51%) and other Sm-doped ZnO nanoparticles. It was believed that Sm(3+) ion with optimal concentration (0.4 mol%) can act as superficial trapping for electrons in the conduction band of ZnO and delayed the recombination of charge carriers. The influence of the nature and concentration of various oxidants, including periodate, hydrogen peroxide, peroxymonosulfate, and peroxydisulfate on the sonocatalytic activity of Sm-doped ZnO nanoparticles was studied. The influence of the oxidants concentration (0.2-1.4 g L(-1)) on the degradation rate was established by the 3D response surface and the 2D contour plots. The results demonstrated that the utilizing of oxidants in combination with Sm-doped ZnO resulting in rapid removal of contaminant, which can be referable to a dual role of oxidants; (i) scavenging the generated electrons in the conduction band of ZnO and (ii) creating highly reactive radical species under ultrasonic irradiation. It was found that the Sm-doped ZnO and periodate combination is the most efficient catalytic system under ultrasonic irradiation.

Microfluidic-based photocatalytic microreactor for environmental application: a review of fabrication substrates and techniques, and operating parameters

This article gives an overview of photocatalytic microreactors with an application in environmental science, in particular, the degradation of different toxic dyes within microchannels.

A Review of Molecular Mechanisms Involved in Toxicity of Nanoparticles

In recent decades, the use of nanomaterials has received much attention in industrial and medical fields. However, some reports have mentioned adverse effects of these materials on the biological systems and cellular components. There are several major mechanisms for cytotoxicity of nanoparticles (NPs) such as physicochemical properties, contamination with toxic element, fibrous structure, high surface charge and radical species generation. In this review, a brief key mechanisms involved in toxic effect of NPs are given, followed by the in vitro toxicity assays of NPs and prooxidant effects of several NPs such as carbon nanotubes, titanium dioxide NPs, quantum dots, gold NPs and silver NPs.

Ultrasonic-assisted sol-gel synthesis of samarium, cerium co-doped TiO2 nanoparticles with enhanced sonocatalytic efficiency

In this work, pure TiO2 and samarium, cerium mono-doped and co-doped TiO2 catalysts were synthesized by an ultrasonic-assisted sol-gel method and their sonocatalytic efficiency studied toward removal of Methyl Orange as a model organic pollutant from the textile industry. The relationship of structure and sonocatalytic performance of catalysts was established by using various techniques, such as XRD, TEM, SEM, EDX, DRS, and PL. A comparison on the removal efficiency of sonolysis alone and sonocatalytic processes was performed. The results showed that the samarium, cerium co-doped TiO2 catalyst with narrower band gap energy and smaller particle size leads to a rapid removal of pollutant. It was believed that Sm(3+) and Ce(4+) ions can serve as superficial trapping for electrons at conduction band of TiO2 and prolonged the lifetime of electron-hole pairs. Finally, the effect of synthesis and operational variables on the sonocatalytic activity of co-doped TiO2 catalyst was studied and optimized using response surface methodology as a statistical technique. The results showed that the maximum removal efficiency (96.33%) was achieved at the optimum conditions: samarium content of 0.6 wt%, cerium content of 0.82 wt%, initial pollutant concentration of 4.31 mg L(-1), catalyst dosage of 0.84 mg L(-1), ultrasonic irradiation power of 700 W, and irradiation time of 50 min.

Comparative toxicities of bismuth oxybromide and titanium dioxide exposure on human skin keratinocyte cells

Nano-sized bismuth oxybromide (BiOBr) particles are being considered for applications within the semiconductor industry. However, little is known about their potential impact on human health. In this study, we comparatively investigated the cytotoxicity of BiOBr and titanium dioxide (TiO2) nanoparticles (NPs) using human skin keratinocyte cell line (HaCaT) as a research model. Results indicate that lamellar-shaped BiOBr (length: 200 nm, width: 150 nm, and an average thickness: around 15 nm) has less toxic effects on cell viability and intracellular organelles than TiO2 (P25) NPs. BiOBr mainly induced late cell apoptosis, while for TiO2, both early apoptosis and late apoptosis were involved. Cell cycle arrest was found in cells on both NPs exposure, and more prominent in TiO2-treated cells. More cellular uptake was achieved after TiO2 exposure, particularly at 10 μg mL(-1), presence of TiO2 resulted in more than 2-fold increase in cellular granularity compared with BiOBr. Furthermore, TiO2 had a high potential to generate intracellular reactive oxygen species (ROS) in cells, where a 2.7-fold increase in TiO2 group and 2.0-fold increase in BiOBr group at the same concentration of 25 μg mL(-1). Higher cellular uptake and ROS stimulation should contribute to the more hazards of TiO2 than BiOBr NPs. This knowledge is a crucial component in the environmental and human hazard assessment of BiOBr and TiO2 NPs.

Protein Corona Prevents TiO2 Phototoxicity

Background & Aim

TiO₂ nanoparticles have generally low toxicity in the in vitro systems although some toxicity is expected to originate in the TiO₂-associated photo-generated radical production, which can however be modulated by the radical trapping ability of the serum proteins. To explore the role of serum proteins in the phototoxicity of the TiO₂ nanoparticles we measure viability of the exposed cells depending on the nanoparticle and serum protein concentrations.

Methods & Results

Fluorescence and spin trapping EPR spectroscopy reveal that the ratio between the nanoparticle and protein concentrations determines the amount of the nanoparticles’ surface which is not covered by the serum proteins and is proportional to the amount of photo-induced radicals. Phototoxicity thus becomes substantial only at the protein concentration being too low to completely coat the nanotubes’ surface.

Conclusion

These results imply that TiO₂ nanoparticles should be applied with ligands such as proteins when phototoxic effects are not desired - for example in cosmetics industry. On the other hand, the nanoparticles should be used in serum free medium or any other ligand free medium, when phototoxic effects are desired – as for efficient photodynamic cancer therapy.

Fabrication of an inexpensive and high efficiency microphotoreactor using CO2 laser technique for photocatalytic water treatment applications

In this study, a micro-photoreactor with catalyst-immobilized micro-channels was designed and fabricated using CO2 laser as a simple and inexpensive technique. The micro-photoreactor is composed of an array of micro-channels, a quartz plate, and an array of UV-LEDs. The micro-channels with the dimension of 400 µm width, 50 µm depth, and 80 cm length were inscribed on a flat plate of poly(methyl methacrylate) (PMMA). The illuminated specific surface area for the designed micro-reactor was calculated to be 25000 m(-1). To examine the performance of miniaturized photoreactor, the photocatalytic degradation of 4-Nitrophenol as a refractory pollutant was investigated. The effects of operational variables on the performance of micro-photoreactor were studied. Higher photocatalytic degradation is obtained for low flow rates, high light intensities, long micro-channels lengths, and low inlet concentrations. Also, the performance of micro-photoreactor was examined in the presence of different types of TiO2 catalysts with an average particle size between 5 and 27 nm (such as P25, PC500, Merck, and UV100) and textile dyes with different chemical structures (such as Acid Orange 7, Acid Violet 19, Basic Red 46, Methyl Orange, and Malachite Green). Finally, the reusability of miniaturized photoreactor was evaluated and the results showed satisfactory stability and reusability for the designed micro-reactor in the photocatalytic degradation of organic pollutants.

Toxicity of TiO2 nanoparticles to Escherichia coli: effects of particle size, crystal phase and water chemistry

Controversial and inconsistent results on the eco-toxicity of TiO2 nanoparticles (NPs) are commonly found in recorded studies and more experimental works are therefore warranted to elucidate the nanotoxicity and its underlying precise mechanisms. Toxicities of five types of TiO2 NPs with different particle sizes (10∼50 nm) and crystal phases were investigated using Escherichia coli as a test organism. The effect of water chemistry on the nanotoxicity was also examined. The antibacterial effects of TiO2 NPs as revealed by dose-effect experiments decreased with increasing particle size and rutile content of the TiO2 NPs. More bacteria could survive at higher solution pH (5.0-10.0) and ionic strength (50-200 mg L(-1) NaCl) as affected by the anatase TiO2 NPs. The TiO2 NPs with anatase crystal structure and smaller particle size produced higher content of intracellular reactive oxygen species and malondialdehyde, in line with their greater antibacterial effect. Transmission electron microscopic observations showed the concentration buildup of the anatase TiO2 NPs especially those with smaller particle sizes on the cell surfaces, leading to membrane damage and internalization. These research results will shed new light on the understanding of ecological effects of TiO2 NPs.