A novel amperometric immunosensor based on Fe3O4 magnetic nanoparticles/chitosan composite film for determination of ferritin

Surface chemistry applications and development of immunosensors using electrochemical impedance spectroscopy: A comprehensive review

Immunosensors are promising alternatives as detection platforms for the current gold standards methods. Electrochemical immunosensors have already proven their capability for the sensitive, selective, detection of target biomarkers specific to COVID-19, varying cancers or Alzheimer's disease, etc. Among the electrochemical techniques, electrochemical impedance spectroscopy (EIS) is a highly sensitive technique which examines the impedance of an electrochemical cell over a range of frequencies. There are several important critical requirements for the construction of successful impedimetric immunosensor. The applied surface chemistry and immobilisation protocol have impact on the electroanalytical performance of the developed immunosensors. In this Review, we summarise the building blocks of immunosensors based on EIS, including self-assembly monolayers, nanomaterials, polymers, immobilisation protocols and antibody orientation.

Generation of bioluminescent enzyme immunoassay for ferritin by single-chain variable fragment and its NanoLuc luciferase fusion

Ferritin, widely present in liver and spleen tissue, is considered as a serological biomarker for liver diseases and cancers. The detection of ferritin may be an important tool in health diagnosis. In this study, 14 non-immunized chicken spleens were utilized to construct a single-chain fragment (scFv) phage library. After 4 rounds of panning, 7 unique clones were obtained. The optimal clone was further screened and combined with NanoLuc luciferase (Nluc) as a dual functional immunoprobe to bioluminescent enzyme immunoassay (BLEIA), which was twice as sensitive as its parental scFv-based double-sandwich enzyme-linked immunoassay (ds-ELISA). The cross-reactivity analysis revealed that the proposed methods were highly selective and suitable for clinical detection. To further verify the performance of the immunoassays, serum samples were tested by the proposed methods and a commercial ELISA kit, and there was a good correlation between the results. These results suggested that scFv fused with Nluc might be a powerful dual functional tool for rapid, practically reliable, and highly sensitive ferritin detection.

Advancement in Salmonella Detection Methods: From Conventional to Electrochemical-Based Sensing Detection

Large-scale food-borne outbreaks caused by Salmonella are rarely seen nowadays, thanks to the advanced nature of the medical system. However, small, localised outbreaks in certain regions still exist and could possess a huge threat to the public health if eradication measure is not initiated. This review discusses the progress of Salmonella detection approaches covering their basic principles, characteristics, applications, and performances. Conventional Salmonella detection is usually performed using a culture-based method, which is time-consuming, labour intensive, and unsuitable for on-site testing and high-throughput analysis. To date, there are many detection methods with a unique detection system available for Salmonella detection utilising immunological-based techniques, molecular-based techniques, mass spectrometry, spectroscopy, optical phenotyping, and biosensor methods. The electrochemical biosensor has growing interest in Salmonella detection mainly due to its excellent sensitivity, rapidity, and portability. The use of a highly specific bioreceptor, such as aptamers, and the application of nanomaterials are contributing factors to these excellent characteristics. Furthermore, insight on the types of biorecognition elements, the principles of electrochemical transduction elements, and the miniaturisation potential of electrochemical biosensors are discussed.

The comparison between light-scattering detectors based on LED and photodiode for immunoprecipitation assays of transferrin and ferritin

Undoubtedly, light-emitting diodes (LEDs) and photodiodes (PDs) are indispensable optoelectronic devices in modern analytical chemistry. LEDs can serve as either light emitters or detectors, thus being an alternative to the most popular detection systems consisted of PD. In this contribution, a comparison between LED-LED and LED-PD detectors, operating in turbidimetric and nephelometric modes, has been carried out for immunoprecipitation detection of transferrin and ferritin. The greatest emphasis was placed on the study of detectors responses under different measurement conditions including current powering an emitter, amplification gain in the case of PD as detector or the construction of detection cells designed for the Multicommutated Flow Analysis (MCFA). The assumption was to obtain the fully-mechanized system with simple but efficient detection system to enable the determination of iron-binding proteins occurring at different concentration ranges in human body. As a result, the optimized arrangements of LED-LED and LED-PD setups were characterized by similar analytical characteristics, enabling the determination of transferrin with the detection limit (LOD) of 0.2 mg/L and RSDs of 2.8-4.8% for LED-LED, and LOD of 0.1 mg/L and RSDs of 0.9-3.6% for LED-PD. In the case of ferritin detection, only the response of the LED-PD detector was statistically distinguishable in the range of 130-198 μg/L of protein with recorded analytical signal change of 20 mV value. The addition of polymer for signal enhancement provided the increase of response range to 107-253 μg/L, enabling the developed system for detection of pathological serum ferritin levels.

Electrochemical biosensors: perspective on functional nanomaterials for on-site analysis

BACKGROUND

The electrochemical biosensor is one of the typical sensing devices based on transducing the biochemical events to electrical signals. In this type of sensor, an electrode is a key component that is employed as a solid support for immobilization of biomolecules and electron movement. Thanks to numerous nanomaterials that possess the large surface area, synergic effects are enabled by improving loading capacity and the mass transport of reactants for achieving high performance in terms of analytical sensitivity.

MAIN BODY

We categorized the current electrochemical biosensors into two groups, carbon-based (carbon nanotubes and graphene) and non-carbon-based nanomaterials (metallic and silica nanoparticles, nanowire, and indium tin oxide, organic materials). The carbon allotropes can be employed as an electrode and supporting scaffolds due to their large active surface area as well as an effective electron transfer rate. We also discussed the non-carbon nanomaterials that are used as alternative supporting components of the electrode for improving the electrochemical properties of biosensors.

CONCLUSION

Although several functional nanomaterials have provided the innovative solid substrate for high performances, developing on-site version of biosensor that meets enough sensitivity along with high reproducibility still remains a challenge. In particular, the matrix interference from real samples which seriously affects the biomolecular interaction still remains the most critical issues that need to be solved for practical aspect in the electrochemical biosensor.

Dual-probe (colorimetric and fluorometric) detection of ferritin using antibody-modified gold@carbon dot nanoconjugates

A dual-mode assay is described for immunological determination of the anemia biomarker ferritin. It is based on the use of a gold@carbon dot (Au@CD) nanoconjugate as a colorimetric and fluorescent probe. Au@CD is hydrophilic, easily surface modified and stable in aqueous solution. The Au@CD have a red color with blue-green fluorescence and were modified with antibody against ferritin. This allows bi-modal detection of ferritin. Assays can be performed in phosphate buffer and were also analyzed in (Bovine Serum Albumin) BSA and (Fetal Bovine Serum) FBS. Detection is based on antigen-antibody interaction underlying the classical sandwich model. Response to ferritin can be detected by spectrophotometry (at 570 nm) or fluorescence (at excitation/emission maxima of 354/454 nm). Under optimal conditions, the assay has a linear response in the 1 to 120 ngmL^-1 ferritin concentration range and detection limits of 20 ng (colorimetrically) and 64 ng (fluorometrically). Graphical abstract Schematic representation of the function of the designed nanoprobe. The Au@CD nanoconjugates are functionalized with ferritin antibody in the initial step which specifically interacts with ferritin molecules leading to aggregation and subsequent changes in the optical and fluorescence signals.

An electrochemiluminescent immunosensor based on CdS–Fe3O4nanocomposite electrodes for the detection of Ochratoxin A

A promising electrochemiluminescent immunosensor based on CdS–Fe₃O₄nanocomposites was developed for the detection of Ochratoxin A.

Detection of a few metallo-protein molecules using color centers in nanodiamonds

Nanometer-sized diamonds containing nitrogen-vacancy defect centers (NV) are promising nanosensors in biological environments due to their biocompatibility, bright fluorescence, and high magnetic sensitivity at ambient conditions. Here we report on the detection of ferritin molecules using magnetic noise induced by the inner paramagnetic iron as a contrast mechanism. We observe a significant reduction of both coherence and relaxation time due to the presence of ferritin on the surface of nanodiamonds. Our theoretical model is in excellent agreement with the experimental data and establishes this method as a novel sensing technology for proteins.

A novel non-enzymatic glucose sensor modified with Fe2O3 nanowire arrays

Fe(2)O(3) was generally considered to be biologically and electrochemically inert, and its electrocatalytic functionality has been rarely realized directly in the past. In this work, Fe(2)O(3) nanowire arrays were synthesized and electrochemically characterized. The as prepared Fe(2)O(3) nanomaterial was proved to be an ideal electrode material due to the intrinsic peroxidase-like catalytic activity. The Fe(2)O(3) nanowire array modified glucose sensor exhibited excellent biocatalytic performance towards the oxidation of glucose with a response time of <6 s, a linear range between 0.015-8 mM, and sensitivity of 726.9 μA mM(-1)cm(-1). Additionally, a high sensing selectivity towards glucose oxidation in the presence of ascorbic acid (AA) and dopamine (DA) has also been obtained at their maximum physiological concentrations, which makes the Fe(2)O(3) nanomaterial promising for the development of effective electrochemical sensors for practical applications.

Ultrasensitive detection of ferritin in human serum by Western blotting based on quantum dots-labeled avidin-biotin system

Various methods have been applied for serum ferritin detection, however, these methods still have some limitations. Over the last few years, quantum dots (QDs) have become very attractive for immunoassays because of their enormous potentials in ultrasensitive analysis. In this study, a Western blotting method combined with QDs-labeled avidin-biotin system for detecting human serum ferritin was described. Meanwhile, the traditional diaminobenzidine (DAB)-horseradish peroxidase (HRP) method had been compared with the method. The linearity of this QDs-based Western blotting method was from 0.27 to 1.1 ng, and the quantification limit was 0.27 ng, the sensitivity was up to pictogram values. Real serum samples such as hepatoma, thalassemia patient and normal individual sera were analyzed, the analysis results demonstrated that there was significant difference in the concentrations of ferritin between patients and normal individual serum. Furthermore, the recovery of ferritin from the serum samples of patients ranged from 98.15 to 119.67%, and the RSD (relative standard deviation) ranged from 8.73 to 11.61%, the repeatabilities were well within the acceptable range, which revealed that this method is a stable and reproducible method for detecting serum ferritin and have potential application prospect in clinical laboratory of serum ferritin detection.

Prospects of nanotechnology in clinical immunodiagnostics

Nanostructured materials are promising compounds that offer new opportunities as sensing platforms for the detection of biomolecules. Having micrometer-scale length and nanometer-scale diameters, nanomaterials can be manipulated with current nanofabrication methods, as well as self-assembly techniques, to fabricate nanoscale bio-sensing devices. Nanostructured materials possess extraordinary physical, mechanical, electrical, thermal and multifunctional properties. Such unique properties advocate their use as biomimetic membranes to immobilize and modify biomolecules on the surface of nanoparticles. Alignment, uniform dispersion, selective growth and diameter control are general parameters which play critical roles in the successful integration of nanostructures for the fabrication of bioelectronic sensing devices. In this review, we focus on different types and aspects of nanomaterials, including their synthesis, properties, conjugation with biomolecules and their application in the construction of immunosensing devices. Some key results from each cited article are summarized by relating the concept and mechanism behind each sensor, experimental conditions and the behavior of the sensor under different conditions, etc. The variety of nanomaterial-based bioelectronic devices exhibiting novel functions proves the unique properties of nanomaterials in such sensing devices, which will surely continue to expand in the future. Such nanomaterial based devices are expected to have a major impact in clinical immunodiagnostics, environmental monitoring, security surveillance and for ensuring food safety.

Nanoimmunoliposome delivery of superparamagnetic iron oxide markedly enhances targeting and uptake in human cancer cells in vitro and in vivo

To circumvent the problem of reduction of the supermagnetic properties of superparamagnetic iron oxide (SPIO) nanoparticles after chemical modification to conjugate targeting molecules, we have adapted a tumor-targeting nanoimmunoliposome platform technology (scL) to encapsulate and deliver SPIO (scL-SPIO) in vitro and in vivo without chemical modification. Scanning probe microscopy, confocal microscopy, and Prussian blue staining were used to analyze the scL-SPIO and assess intracellular uptake and distribution of SPIO in vitro. In vivo targeting and tumor-specific uptake of scL-SPIO was examined using fluorescent-labeled SPIO. We demonstrated that SPIO encapsulation in the scL complex results in an approximately 11-fold increase in SPIO uptake in human cancer cells in vitro, with distribution to cytoplasm and nucleus. Moreover, the scL nanocomplex specifically and efficiently delivered SPIO into tumor cells after systemic administration, demonstrating the potential of this approach to enhance local tumor concentration and the utility of SPIO for clinical applications.