Micro- and nanometer-scale patterned surface in a microchannel for cell culture in microfluidic devices

Biomaterials based on hyaluronic acid, collagen and peptides for three-dimensional cell culture and their application in stem cell differentiation

In recent decades, three-dimensional (3D) cell culture technologies have been developed rapidly in the field of tissue engineering and regeneration, and have shown unique advantages and great prospects in the differentiation of stem cells. Herein, the article reviews the progress and advantages of 3D cell culture technologies in the field of stem cell differentiation. Firstly, 3D cell culture technologies are divided into two main categories: scaffoldless and scaffolds. Secondly, the effects of hydrogels scaffolds and porous scaffolds on stem cell differentiation in the scaffold category were mainly reviewed. Among them, hydrogels scaffolds are divided into natural hydrogels and synthetic hydrogels. Natural materials include polysaccharides, proteins, and their derivatives, focusing on hyaluronic acid, collagen and polypeptides. Synthetic materials mainly include polyethylene glycol (PEG), polyacrylic acid (PAA), polyvinyl alcohol (PVA), etc. In addition, since the preparation techniques have a large impact on the properties of porous scaffolds, several techniques for preparing porous scaffolds based on different macromolecular materials are reviewed. Finally, the future prospects and challenges of 3D cell culture in the field of stem cell differentiation are reviewed. This review will provide a useful guideline for the selection of materials and techniques for 3D cell culture in stem cell differentiation.

Genetically Engineered Phage Induced Selective H9c2 Cardiomyocytes Patterning in PDMS Microgrooves

A micro-patterned cell adhesive surface was prepared for future design of medical devices. One-dimensional polydimethylsiloxane (PDMS) micro-patterns were prepared by a photolithography process. Afterwards, recombinant filamentous phages that displayed a short binding motif with a cell adhesive peptide (-RGD-) on p8 proteins were immobilized on PDMS microgrooves through simple contact printing to study the cellular response of rat H9c2 cardiomyocyte. While the cell density decreased on PDMS micro-patterns, we observed enhanced cell proliferation and cell to surface interaction on the RGD-phage coated PDMS microgrooves. The RGD-phage coating also supported a better alignment of cell spreading rather than isotropic cell growths as we observed on non-pattered PDMS surface.

Cell Microarray Technologies for High-Throughput Cell-Based Biosensors

Due to the recent demand for high-throughput cellular assays, a lot of efforts have been made on miniaturization of cell-based biosensors by preparing cell microarrays. Various microfabrication technologies have been used to generate cell microarrays, where cells of different phenotypes are immobilized either on a flat substrate (positional array) or on particles (solution or suspension array) to achieve multiplexed and high-throughput cell-based biosensing. After introducing the fabrication methods for preparation of the positional and suspension cell microarrays, this review discusses the applications of the cell microarray including toxicology, drug discovery and detection of toxic agents.

Spatial Site-Patterning of Wettability in a Microcapillary Tube

Substrate functionalization is of great importance in successfully manipulating flows and liquid interfaces in microdevices. Herein, we propose an alternative approach for spatial patterning of wettability in a microcapillary tube. The method combines a photolithography process with self-assembled monolayer formation. The modified microcapillaries show very sharp boundaries between the alternating hydrophilic/hydrophobic segments with an achieved smallest domain dimension down to 60 μm inside a 580 μm inner diameter capillary. Our two-step method allows us to pattern multiple types of functional groups in an enclosed channel. Such structures are promising regarding the manipulation of segmented flows inside capillaries.

Capturing Cancer: Emerging Microfluidic Technologies for the Capture and Characterization of Circulating Tumor Cells

Circulating tumor cells (CTCs) escape from primary or metastatic lesions and enter into circulation, carrying significant information of cancer progression and metastasis. Capture of CTCs from the bloodstream and the characterization of these cells hold great significance for the detection, characterization, and monitoring of cancer. Despite the urgent need from clinics, it remains a major challenge to capture and retain these rare cells from human blood with high specificity and yield. Recent exciting advances in micro/nanotechnology, microfluidics, and materials science have enable versatile, robust, and efficient cell isolation and processing through the development of new micro/nanoengineered devices and biomaterials. This review provides a summary of recent progress along this direction, with a focus on emerging methods for CTC capture and processing, and their application in cancer research. Furthermore, classical as well as emerging cellular characterization methods are reviewed to reveal the role of CTCs in cancer progression and metastasis, and hypotheses are proposed in regard to the potential emerging research directions most desired in CTC-related cancer research.

Nerve guidance conduits from aligned nanofibers: improvement of nerve regeneration through longitudinal nanogrooves on a fiber surface

A novel fibrous conduit consisting of well-aligned nanofibers with longitudinal nanogrooves on the fiber surface was prepared by electrospinning and was subjected to an in vivo nerve regeneration study on rats using a sciatic nerve injury model. For comparison, a fibrous conduit having a similar fiber alignment structure without surface groove and an autograft were also conducted in the same test. The electrophysiological, walking track, gastrocnemius muscle, triple-immunofluorescence, and immunohistological analyses indicated that grooved fibers effectively improved sciatic nerve regeneration. This is mainly attributed to the highly ordered secondary structure formed by surface grooves and an increase in the specific surface area. Fibrous conduits made of longitudinally aligned nanofibers with longitudinal nanogrooves on the fiber surface may offer a new nerve guidance conduit for peripheral nerve repair and regeneration.

Micro- and nanoengineering for stem cell biology: the promise with a caution

Current techniques used in stem cell research only crudely mimic the physiological complexity of the stem cell niches. Recent advances in the field of micro- and nanoengineering have brought an array of in vitro cell culture models that have enabled development of novel, highly precise and standardized tools that capture physiological details in a single platform, with greater control, consistency, and throughput. In this review, we describe the micro- and nanotechnology-driven modern toolkit for stem cell biologists to design novel experiments in more physiological microenvironments with increased precision and standardization, and caution them against potential challenges that the modern technologies might present.

Human macrophage adhesion on polysaccharide patterned surfaces

Despite many advances in designing biocompatible materials, inflammation remains a problem in medical devices and implants. We report two methods, microcontact printing and photodegradation by UV exposure, to pattern dextran and hyaluronic acid on glass, as well as demonstrate their utility for use as an anti-inflammatory biomaterial. The dextran/glass patterned surface can be further modified by grafting hyaluronic acid to glass, creating a binary polysaccharide patterned surface. We used two geometries, 90 µm squares and 22 µm stripes, to study the human macrophage (THP-1) adhesion on the patterned surfaces containing dextran, hyaluronic acid and the binary pattern. The results indicate that a majority of the macrophages are non-adherent on hyaluronic acid for three day culture. The ranking of surfaces according to macrophage adhesion is 3-aminopropyl triethoxysilane-modified glass culture dish, dextranized surfaces, glass, and hyaluronic acid-modified surfaces. On the binary pattern of dextran and hyaluronic acid, macrophages preferentially attach and adhere to the dextranized area. Patterned surfaces provide an excellent platform for mimicking the complexity of the glycocalyx and investigating the interface between this surface and cells. This binary polysaccharide pattern also offers a new route to address anti-inflammatory potential of surface coatings on biomaterials in a high through-put fashion.

Adhesion based detection, sorting and enrichment of cells in microfluidic Lab-on-Chip devices

The detection, isolation and sorting of cells are important tools in both clinical diagnostics and fundamental research. Advances in microfluidic cell sorting devices have enabled scientists to attain improved separation with comparative ease and considerable time savings. Despite the great potential of Lab-on-Chip cell sorting devices for targeting cells with desired specificity and selectivity, this field of research remains unexploited. The challenge resides in the detection techniques which has to be specific, fast, cost-effective, and implementable within the fabrication limitations of microchips. Adhesion-based microfluidic devices seem to be a reliable solution compared to the sophisticated detection techniques used in other microfluidic cell sorting systems. It provides the specificity in detection, label-free separation without requirement for a preprocessing step, and the possibility of targeting rare cell types. This review elaborates on recent advances in adhesion-based microfluidic devices for sorting, detection and enrichment of different cell lines, with a particular focus on selective adhesion of desired cells on surfaces modified with ligands specific to target cells. The effect of shear stress on cell adhesion in flow conditions is also discussed. Recently published applications of specific adhesive ligands and surface functionalization methods have been presented to further elucidate the advances in cell adhesive microfluidic devices.

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ=625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.

An efficient surface modification using 2-methacryloyloxyethyl phosphorylcholine to control cell attachment via photochemical reaction in a microchannel

This report describes a direct approach for cell micropatterning in a closed glass microchannel. To control the cell adhesiveness inside the microchannel, the application of an external stimulus such as ultraviolet (UV) was indispensible. This technique focused on the use of a modified 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which is known to be a non-biofouling compound that is a photocleavable linker (PL), to localize cells via connection to an amino-terminated silanized surface. Using UV light illumination, the MPC polymer was selectively eliminated by photochemical reaction that controlled the cell attachment inside the microchannel. For suitable cell micropatterning in a microchannel, the optimal UV illumination time and concentration for cell suspension were investigated. After selective removal of the MPC polymer through the photomask, MC-3T3 E1 cells and vascular endothelial cells (ECs) were localized only to the UV-exposed area. In addition, the stability of patterned ECs was also confirmed by culturing for 2 weeks in a microchannel under flow conditions. Furthermore, we employed two different types of cells inside the same microchannel through multiple removal of the MPC polymer. ECs and Piccells were localized in both the upper and down streams of the microchannel, respectively. When the ECs were stimulated by adenosine triphosphate (ATP), NO was secreted from the ECs and could be detected by fluorescence resonance energy transfer (FRET) in Piccells, which is a cell-based NO indicator. This technique can be a powerful tool for analyzing cell interaction research.

Correlation of cell adhesive behaviors on superhydrophobic, superhydrophilic, and micropatterned superhydrophobic/superhydrophilic surfaces to their surface chemistry

A micropatterned superhydrophobic/superhydrophilic surface was successfully fabricated by plasma CVD and VUV irradiation. Physicochemical properties of the superhydrophobic, superhydrophilic, and superhydrophobic/superhydrophilic surfaces were investigated. The roughness structures on the superhydrophilic surface remained intact compared to those of the superhydrophobic surface. The micropatterned superhydrophobic/superhydrophilic surface was used as a scaffold of cell culture. On the micropatterned surface, the cells attached to the superhydrophilic regions in a highly selective manner, forming circular microarrays of the cells corresponding to the pattern. On the micropatterned surface with pattern distances of 200 microm between superhydrophilic regions, the cells adhered on the superhydrophilic regions and partly extended to the neighboring cells. In contrast, when the pattern distances between the superhydrophilic regions were more than 400 microm, the cells did not extend to the neighboring cells. Cell adhesion behaviors on superhydrophobic and superhydrophilic surfaces were also examined. The cells adhered and proliferated on both superhydrophobic and superhydrophilic surfaces. However, on the superhydrophobic surface, constant contact to facilitate cell division and proliferation was required. On the other hand, the cells easily adhered and proliferated on the superhydrophilic surface immediately after seeding. These differences in cell adhesion behavior induced site-selective cell adhesion on the superhydrophilic regions. Furthermore, protein adsorption behavior that plays an important role in cell adhesion on flat hydrophobic and hydrophilic surface was also examined. The amounts of the protein adsorption on the flat hydrophilic surface were much greater than those on the flat hydrophobic surface.

Cell culture and motility study on a polymer surface with a nanometer-scaled stripe structure

We developed a large cell culture surface with a nanostripe structure by paving polydimethylsiloxane (PDMS) replicas of a glass mold. The stripe structure has a height of 180 nm and top width of 500 nm with 400-nm intervals between stripes. Human stomach cancer SH-10-TC cells cultured on the surface changed their morphology to elongated shapes parallel to the nanostripes. In addition, cell motility parallel to the stripes was greatly enhanced. These findings strongly suggest that the nanostripe structure affected the cell physiology.

NANOPATTERNED INTERFACES FOR CONTROLLING CELL BEHAVIOR

Many studies have demonstrated that microscale changes to surface chemistry and topography affect cell adhesion, proliferation, differentiation, and gene expression. More recently, studies have begun to examine cell behavior interactions with structures on the nanoscale since in vivo, cells recognize and adhere to cell adhesion receptors that are spatially organized on this scale. These studies have been enabled through various fabrication methods, many of which were initially developed for the semiconductor industry. This review explores cell responses to a variety of controlled topographical and biochemical cues using an assortment of nanoscale fabrication methods in order to elucidate which pattern dimensions are beneficial for controlling cell adhesion and differentiation.

Site-specific immobilization of DNA in glass microchannels via photolithography

For the first time, a microchannel was photochemically patterned with a functional linker. This simple method was developed for the site-specific attachment of DNA via this linker onto silicon oxide surfaces (e.g., fused silica and borosilicate glass), both onto a flat surface and onto the inside of a fused silica microchannel. Sharp boundaries in the micrometer range between modified and unmodified zones were demonstrated by the attachment of fluorescently labeled DNA oligomers. Studies of repeated hybridization-dehybridization cycles revealed selective and reversible binding of cDNA strands at the explicit locations. On average, approximately 7 x 10(11) fluorescently labeled DNA molecules were hybridized per square centimeter. The modified surfaces were characterized with X-ray photoelectron spectroscopy, infrared microscopy, static contact angle measurements, confocal laser scanning microscopy, and fluorescence detection (to quantify the attachment of the fluorescently labeled DNA).

Three-dimensional cell culture array using magnetic force-based cell patterning for analysis of invasive capacity of BALB/3T3/v-src

A three-dimensional (3D) cell culture system has been fabricated using a magnetic force based cell patterning method, demonstrating a facile approach for the analysis of invasive capacity of BALB/3T3/v-src using an magnetic force and magnetite nanoparticles. The 3D cell patterning was performed using an external magnetic force and a pin holder, which enables the assembly of the magnetically labeled cells on the collagen gel-coated surface as array-like cell patterns, resulting in the development of a 3D in vitro culture model. The cells embedded in type I collagen showed a compacted, spheroid like configuration at each spot, and distinct, accelerated cell growth was observed in cancer model cells compared with the control cells. The developed 3D cell culture array was applied to the susceptibility assay of the GM6001 matrix metalloproteinase (MMP) inhibitor, a collagenase inhibitor; a distinct suppression of cell proliferation was observed, while little change was observed in 2D. The developed 3D cell culture array system is useful to assess the effects of pharmacologic and/or microenvironmental influences on tumor cell invasion.

Parallel multiphase microflows: fundamental physics, stabilization methods and applications

Parallel multiphase microflows, which can integrate unit operations in a microchip under continuous flow conditions, are discussed. Fundamental physics, stabilization methods and some applications are shown.

Controlled deposition of cells in sealed microfluidics using flow velocity boundaries

We present a method for depositing cells in a sealed microfluidic device. The device consists of a poly(dimethylsiloxane) (PDMS) microfluidic network (MFN) sealed with a Si chip. The Si chip has vias and ports that are connected to high-precision motorized pumps. The surfaces of the PDMS MFN are homogeneously coated with fibronectin cell adhesion molecules (CAMs). Flow velocity boundaries are created between vicinal microfluidic structures to prevent or permit deposition of cells in specific regions of the MFN. In narrow flow paths, cells experience a wall shear stress from the fast-moving liquid that overcomes the initial adhesion of the cells with CAMs. Conversely, cells can adhere to CAMs in larger flow paths such as cell chambers inside which the velocity of the liquid and the shear stress are reduced. Interactively changing pumping rates makes the critical velocity (the velocity at which cells deposit in the chamber but not elsewhere) easy to find. The transparent PDMS MFN allows both real-time visualization of the deposition process and cellular assays. We illustrate this method using N9 mouse microglia cells. In one experiment, approximately 75 microglia are deposited per min in a approximately 0.5 microL chamber. The deposited cells remain viable, as assessed from staining and biofunctional assays. This method is simple, reliable, fast, and flexible, and therefore is an attractive technique for depositing cells in microfluidic systems for numerous applications.

Parallel determination of phenotypic cytotoxicity with a micropattern of mutant cell lines

This work presents a novel tool, the Continuous Flow Microspotter (CFM) and its use in patterning cellular microarrays of multiple cell types into the bottom of a tissue culture well. The CFM uses a system of isolated microfluidic channels to make an array of localized microspots of adhesion dependent cells in the bottom of a conventional tissue culture well. With this device we have created micropatterns of multiple cell lines in a single tissue culture well and used this system to conduct simultaneous cytotoxicity tests and recover dose survival curves in a parallel study. This mechanism of parallel testing allows the researcher to employ the use of positive and negative controls, as well as compare the chemical response of phenotypes in a tightly controlled microenvironment. For the experiments presented in this paper we have fabricated a CFM with a set of ten microchannels (five inlet channels and five outlet channels) to pattern a row of five microspots consisting of four cellular microspots and one empty spot for background measurements. Micropatterns containing a set of four different Chinese hamster ovarian cell (CHO) mutant phenotypes were deposited into the bottom of commercially available tissue culture wells then interrogated with mitomycin C, a chemotherapeutic agent. This study shows statistically significant (P < 0.05) hypersensitivity of the UV20 CHO mutant to a DNA interstrand cross-linking agent (mitomycin C). Because the CFM is also capable of depositing proteins and other biomolecules to the individual microspots of the array we foresee capabilities of the 48 microspot CFM to multiplex 48 cell types with 48 chemical reagents all within the confines of a 60 mm(2) area.