Recent advances in the development of graphene-based surface plasmon resonance (SPR) interfaces

2D material-based surface plasmon resonance biosensors for applications in different domains: an insight

The design of surface plasmon resonance (SPR) sensors has been greatly enhanced in recent years by the advancements in the production and integration of nanostructures, leading to more compact and efficient devices. There have been reports of novel SPR sensors having distinct nanostructures, either as signal amplification tags like gold nanoparticles (AuNPs) or as sensing substrate-like two-dimensional (2D) materials including graphene, transition metal dichalcogenides (TMDCs), MXene, black phosphorus (BP), metal-organic frameworks (MOFs), and antimonene. Such 2D-based SPR biosensors offer advantages over conventional sensors due to significant increases in their sensitivity with a good figure of merit and limit of detection (LOD). Due to their atomically thin structure, improved sensitivity, and sophisticated functionalization capabilities, 2D materials can open up new possibilities in the field of healthcare, particularly in point-of-care diagnostics, environmental and food monitoring, homeland security protection, clinical diagnosis and treatment, and flexible or transient bioelectronics. The present study articulates an in-depth analysis of the most recent developments in 2D material-based SPR sensor technology. Moreover, in-depth research of 2D materials, their integration with optoelectronic technology for a new sensing platform, and the predicted and experimental outcomes of various excitation approaches are highlighted, along with the principles of SPR biosensors. Furthermore, the review projects the potential prospects and future trends of these emerging materials-based SPR biosensors to advance in clinical diagnosis, healthcare biochemical, and biological applications.

An ultra-sensitive biosensor based on surface plasmon resonance and weak value amplification

An ultra-sensitive phase plasmonic sensor combined with weak value amplification is proposed for the detection of IgG, as a model analyte. Phase detection is accomplished by self-interference between the p-polarization and the s-polarization of the light. With the principles of weak value amplification, a phase compensator is used to modulate the coupling strength and enhance the refractive index sensitivity of the system. On a simple Au-coated prism-coupled surface plasmon resonance (SPR) structure, the scheme, called WMSPR, achieves a refractive index sensitivity of 4.737 × 104 nm/RIU, which is about three times higher than that of the conventional phase-based approach. The proposed WMSPR biosensor gives great characteristics with a high resolution of 6.333 × 10-8 RIU and a low limit of detection (LOD) of 5.3 ng/mL. The results yield a great scope to promote the optimization of other SPR biosensors for high sensitivity.

A novel simulador for agile and graphical modeling of surface plasmon resonance based sensors

Surface plasmon resonance (SPR) sensor is a consolidated technology for analysis of biomolecular interaction, largely applied in biology and pharmaceutical research. The simulation of the surface plasmon optical excitation response is an important step in the development process of SPR based sensors. The structure, design and configuration of the desired sensor benefits from a previous simulated analyses of the generated responses, defining operational conditions and feasibility of the selected materials to composed the optical coupling layers. Here an online web-based SPR sensor's simulator is presented. With a visual-oriented interface, enable drag & drop actions to easily and quickly model a variety of sensor arrangements. Presenting an embedded materials database for metals, glasses, 2D materials, nanoparticles, polymers, and custom substances, the simulator enables flexible configuration for sensors operating in angular and spectral modes, as well as localized SPR. The light propagation through the multilayer of materials is presented in terms of Fresnel coefficients, which are graphically displayed. The so-called SPR morphology parameters can be visualized. Moreover, sensor dynamic behavior could be knowledge by a Sensorgram simulation. Localized surface plasmon resonance (LSPR) in homogeneous and spherical nanoparticles is also present in the simulator. Simulated scenario's in various configurations, designs and excitation were performed and compare with other simulator. The proposed simulator guarantees comparable results with low-code, agile, and intuitive flow of execution.

Real-time hybrid angular-interrogation surface plasmon resonance sensor in the near-infrared region for wide dynamic range refractive index sensing

Herein, we integrated angle-scanning surface plasmon resonance (SPR) and angle-fixed SPR as a hybrid angular-interrogation SPR to enhance the sensing performance. Galvanometer-mirror-based beam angle scanning achieves a 100-Hz acquisition rate of both the angular SPR reflectance spectrum and the angle-fixed SPR reflectance, whereas the use of near-infrared light enhances the refractive index (RI) sensitivity, range, and precision compared with visible light. Simultaneous measurement of the angular SPR reflectance spectrum and angle-fixed SPR reflectance boosts the RI change range, RI resolution, and RI accuracy to 10-1-10-6 RIU, 2.24 × 10-6 RIU, and 5.22 × 10-6 RIU, respectively. The proposed hybrid SPR is a powerful tool for wide-dynamic-range RI sensing with various applications.

Label-free optical biosensing: going beyond the limits

Label-free optical biosensing holds great promise for a variety of applications in biomedical diagnostics, environmental and food safety, and security. It is already used as a key tool in the investigation of biomolecular binding events and reaction constants in real time and offers further potential additional functionalities and low-cost designs. However, the sensitivity of this technology does not match the routinely used but expensive and slow labelling methods. Therefore, label-free optical biosensing remains predominantly a research tool. Here we discuss how one can go beyond the limits of detection provided by standard optical biosensing platforms and achieve a sensitivity of label-free biosensing that is superior to labelling methods. To this end we review newly emerging optical implementations that overcome current sensitivity barriers by employing novel structural architectures, artificial materials (metamaterials and hetero-metastructures) and using phase of light as a sensing parameter. Furthermore, we elucidate the mechanism of plasmonic phase biosensing and review hyper-sensitive transducers, which can achieve detection limits at the single molecule level (less than 1 fg mm-2) and make it possible to detect analytes at several orders of magnitude lower concentrations than so far reported in literature. We finally discuss newly emerging layouts based on dielectric nanomaterials, bound states in continuum, and exceptional points.

Graphene-on-gold surface plasmon resonance sensors resilient to high-temperature annealing

Gold films coated with a graphene sheet are being widely used as sensors for the detection of label-free binding interactions using surface plasmon resonance (SPR). During the preparation of such sensors, it is often essential to subject the sensor chips to a high-temperature treatment in order to ensure a clean graphene surface. However, sensor chips used currently, which often use chromium as an adhesion promoter, cannot be subjected to temperatures above 250 °C, because under such conditions, chromium is found to reorganize and diffuse to the surface, where it is easily oxidized, impairing the quality of SPR spectra. Here we present an optimized preparation strategy involving a three-cycle tempering coupled with chromium (oxide) etching, which allows the graphene-coated SPR chips to be annealed up to 500 °C with little deterioration of the surface morphology. In addition, the treatment delivers a surface that shows a clear enhancement in spectral response together with a good refractive index sensitivity. We demonstrate the applicability of our sensors by studying the kinetics of avidin-biotin binding at different pH repeatedly on the same chip. The possibility to anneal can be exploited to recover the original surface after sensing trials, which allowed us to reuse the sensor for at least six cycles of biomolecule adsorption.

Quorum sensing-based interactions among drugs, microbes, and diseases

Many diseases and health conditions are closely related to various microbes, which participate in complex interactions with diverse drugs; nonetheless, the detailed targets of such drugs remain to be elucidated. Many existing studies have reported causal associations among drugs, gut microbes, or diseases, calling for a workflow to reveal their intricate interactions. In this study, we developed a systematic workflow comprising three modules to construct a Quorum Sensing-based Drug-Microbe-Disease (QS-DMD) database ( http://www.qsdmd.lbci.net/ ), which includes diverse interactions for more than 8,000 drugs, 163 microbes, and 42 common diseases. Potential interactions between microbes and more than 8,000 drugs have been systematically studied by targeting microbial QS receptors combined with a docking-based virtual screening technique and in vitro experimental validations. Furthermore, we have constructed a QS-based drug-receptor interaction network, proposed a systematic framework including various drug-receptor-microbe-disease connections, and mapped a paradigmatic circular interaction network based on the QS-DMD, which can provide the underlying QS-based mechanisms for the reported causal associations. The QS-DMD will promote an understanding of personalized medicine and the development of potential therapies for diverse diseases. This work contributes to a paradigm for the construction of a molecule-receptor-microbe-disease interaction network for human health that may form one of the key knowledge maps of precision medicine in the future.

Performance Enhancement of SPR Biosensor Using Graphene–MoS2 Hybrid Structure

We investigate a high-sensitivity surface plasmon resonance (SPR) biosensor consisting of a Au layer, four-layer MoS₂, and monolayer graphene. The numerical simulations, by the transfer matrix method (TMM), demonstrate the sensor has a maximum sensitivity of 282°/RIU, which is approximately 2 times greater than the conventional Au-based SPR sensor. The finite difference time domain (FDTD) indicates that the presence of MoS₂ film generates a strong surface electric field and enhances the sensitivity of the proposed SPR sensor. In addition, the influence of the number of MoS₂ layers on the sensitivity of the proposed sensor is investigated by simulations and experiments. In the experiment, MoS₂ and graphene films are transferred on the Au-based substrate by the PMMA-based wet transfer method, and the fabricated samples are characterized by Raman spectroscopy. Furthermore, the fabricated sensors with the Kretschmann configuration are used to detect okadaic acid (OA). The okadaic acid–bovine serum albumin bioconjugate (OA-BSA) is immobilized on the graphene layer of the sensors to develop a competitive inhibition immunoassay. The results show that the sensor has a very low limit of detection (LOD) of 1.18 ng/mL for OA, which is about 22.6 times lower than that of a conventional Au biosensor. We believe that such a high-sensitivity SPR biosensor has potential applications for clinical diagnosis and immunoassays.

Recent Advances in Surface Plasmon Resonance Sensors for Sensitive Optical Detection of Pathogens

The advancement of science and technology has led to the recent development of highly sensitive pathogen biosensing techniques. The effective treatment of pathogen infections requires sensing technologies to not only be sensitive but also render results in real-time. This review thus summarises the recent advances in optical surface plasmon resonance (SPR) sensor technology, which possesses the aforementioned advantages. Specifically, this technology allows for the detection of specific pathogens by applying nano-sized materials. This review focuses on various nanomaterials that are used to ensure the performance and high selectivity of SPR sensors. This review will undoubtedly accelerate the development of optical biosensing technology, thus allowing for real-time diagnosis and the timely delivery of appropriate treatments as well as preventing the spread of highly contagious pathogens.

Sensitivity enhancement of a silver based surface plasmon resonance sensor via an optimizing graphene-dielectric composite structure

A silver based surface plasmon resonance (SPR) sensor with dielectric-graphene composite film is presented. The influences of the dielectric layer and graphene on sensitivity and other sensing properties are theoretically calculated and then comprehensively discussed. The refractive index sensitivities for composite silver film based SPR sensors with graphene and dielectric layers could be increased by 29% and 288% more than that of monolayer silver film based SPR sensors, respectively. Further, the sensitivity could be enhanced by 202% when combining the graphene and dielectric layers together. Considering the high adsorptive capacity of graphene for biochemical molecules, the composite silver film with both a dielectric layer and graphene would have great potential application in biochemical sensing fields. Further, bovine serum albumin protein was successfully used to verify the biochemical sensing ability of the proposed SPR sensor. The shift of resonance angle is nearly 3.1 fold that of monolayer silver based SPR sensors.

Rapid and sensitive detection of PD-L1 exosomes using Cu-TCPP 2D MOF as a SPR sensitizer

Two-dimensional metal organic framework (2D MOF Cu-TCPP) with significantly enhanced photoelectric properties was synthesized by a simple hydrothermal method. The π-stacked electroactive porphyrin molecules of TCPP-based 2D MOF carry out charge transport in the MOF structure. The d-d band transition of Cu²⁺ and its 2D ultra-thin characteristics can produce excellent near-infrared light absorption to couple with SPR. Three key parameters including the refractive index sensitivity, detection accuracy and quality factor were improved significantly for 2D MOF modified gold chips. Especially, the refractive index sensitivity was increased from 98 to 137.67°/RIU after modified with 2D MOF. Thus, for the first time, we applied it as a signal enhancer to improve direct SPR assay for the Programmed death ligand-1 (PD-L1) exosomes. Owning to its large specific surface area, excellent photoelectric properties, highly ordered structure, good dispersion and biocompatibility, the LOD of the SPR sensor was 16.7 particles/mL. The reliability and practicability were further validated by analysis of PD-L1 exosomes in human serum samples. The recovery rate was 93.43 %-102.35%, with RSD of 5.79 %-14.6%. Given their excellent signal amplification ability, 2D MOF Cu-TCPP could serve as an ideal SPR sensitizer for rapid and sensitive detection of trace disease markers.

Development of an aptamer-based SPR-biosensor for the determination of kanamycin residues in foods

A biosensor in which an affinity reaction occurs in the sensitive microzone through the use of specific aptamers to determine kanamycin residues in agri-food samples has been developed. It is an irreversible and continuous flow aptameric biosensor (aptasensor) in which the signal variations are monitored by surface plasmon resonance (SPR) measurements based on the specific interaction of the aptamer with the antibiotic. The signal variation is proportional to the analyte concentration. Graphene is known for efficient binding of molecules with its π-electron system, so a monolayer of graphene prepared from chemical vapor deposition (CVD) has been compared to a multilayer of graphene made from reduced graphene oxide (rGO) for immobilization of the aptamer on the gold surface of the physicochemical transducer. The best results have been obtained with CVD graphene. The dynamic range was between 1 and 100 μmol L^-1 of kanamycin concentration (r² = 0.9981, n = 7, r = 4), with a limit of detection of 285 nmol L^-1 and a sampling frequency of 6 h^-1. The precision, expressed as relative standard deviation (RSD%), was established in the range of 1.49 and 3.89%, calculated for 1, 10, and 50 μmol L^-1. The selectivity was studied applying the described method to determine other antibiotics, obtaining no significant difference in the analytical signal. The method was applied to determine kanamycin residues in milk samples with recovery values ranging between 90 and 96%.

A Review of Graphene-Based Surface Plasmon Resonance and Surface-Enhanced Raman Scattering Biosensors: Current Status and Future Prospects

The surface plasmon resonance (SPR) biosensor has become a powerful analytical tool for investigating biomolecular interactions. There are several methods to excite surface plasmon, such as coupling with prisms, fiber optics, grating, nanoparticles, etc. The challenge in developing this type of biosensor is to increase its sensitivity. In relation to this, graphene is one of the materials that is widely studied because of its unique properties. In several studies, this material has been proven theoretically and experimentally to increase the sensitivity of SPR. This paper discusses the current development of a graphene-based SPR biosensor for various excitation methods. The discussion begins with a discussion regarding the properties of graphene in general and its use in biosensors. Simulation and experimental results of several excitation methods are presented. Furthermore, the discussion regarding the SPR biosensor is expanded by providing a review regarding graphene-based Surface-Enhanced Raman Scattering (SERS) biosensor to provide an overview of the development of materials in the biosensor in the future.

Carbon-based Nanomaterials and Curcumin: A Review of Biosensing Applications

Curcumin, the main active constituent of turmeric (Curcuma longa L.), is a naturally occurring phenolic compound with a wide variety of pharmacological activities. Although it has multiple pharmaceutical properties, its bioavailability and industrial usage are hindered due to rapid hydrolysis and low water solubility. Due to the growing market of curcumin, exact determination of curcumin in trade and human biological samples is important for monitoring therapeutic actions. Different nanomaterials have been suggested for sensing curcumin; and in this case, carbon-based nanomaterials (CNMs) are one of the most outstanding developments in nanomedicine, biosensing, and regenerative medicine. There are a considerable number of reports which have shown interesting potential of CNMs-based biosensors in the sensitive and selective detection of curcumin. Therefore, this review aims to increase understanding the interaction of curcumin with CNMs in the context of biosensing.

A microwell array structured surface plasmon resonance imaging gold chip for high-performance label-free immunoassay

Surface plasmon resonance imaging (SPRi) offers a compelling method for high-throughput, real-time, and label-free biomolecular interaction studies and immunoassays, but its performance suffers from limited intrinsic sensitivity and low-contrast SPRi images. Herein we report a high-performance SPRi chip featuring patterned microwell array constructed by photolithography of adhesive polydopamine (PDA) thin film on conventional gold chip. The chip allows for the facile construction of region-defined sensing array on its surface with improved intrinsic SPRi sensitivity due to the intensified surface plasmon wave (SPW) in the microwells. The immunoassay performance of the as-designed SPRi chip is evaluated by using anti-ochratoxin A (anti-OTA) monoclonal antibody as a model target. The results show that this microwell array structured gold chip exhibits ca. 18%-32% higher signal intensity than the conventional gold chip when detecting anti-OTA at different concentrations, and the noise remains at the same level, showing enhanced intrinsic sensitivity. Meanwhile, this microwell-structured chip affords clear and high-contrast SPRi images with well-defined sensing areas, which greatly facilitates the extraction and quantitative analysis of detection signals while efficiently suppressing the disturbance from background areas.

Exploring Graphene and MoS2 Chips Based Surface Plasmon Resonance Biosensors for Diagnostic Applications

Until now, two-dimensional (2D) nanomaterials have been widely studied and applied in the biosensor field. Some of the advantages offered by these 2D materials include large specific surface area, high conductivity, and easy surface modification. This review discusses the use of 2D material in surface plasmon resonance (SPR) biosensor for diagnostic applications. Two-dimensional material reviewed includes graphene and molybdenum disulfide (MoS2). The discussion begins with a brief introduction to the general principles of the SPR biosensor. The discussion continues by explaining the properties and characteristics of each material and its effect on the performance of the SPR biosensor, in particular its sensitivity. This review concludes with some recent applications of graphene- and MoS2-based SPR biosensor in diagnostic applications.

Gold-silver alloy film based surface plasmon resonance sensor for biomarker detection

In this study, we developed a gold‑silver alloy film based surface plasmon resonance (AuAg-SPR) sensor with wavelength interrogation to detect cancer antigen 125 (CA125) using a sandwich immunoassay. We first theoretically simulated the sensitivity of conventional gold film based SPR (Au-SPR) sensor and AuAg-SPR sensor, and conducted a series of experiments to investigate the sensitive characteristics of AuAg-SPR sensor, including the angle and refractive index (RI) sensitivity. We then conducted CA125 detection experiments on these two types of sensors. The results demonstrated that the limit of detection (LOD) of CA125 on the AuAg-SPR sensor was 0.1 U/mL (0.8 ng/mL) based on its direct reaction with an immobilised antibody, which was two orders of magnitude lower than that of the Au-SPR sensor (10 U/mL). The total changes in the resonance wavelength (∆λ_R) of the former were 1.7-fold those of the latter. The volume fractions of the adsorbates (f_ad) and effective RIs (n_adlayer) in each adlayer were then calculated and the effect of the antibody size on the detection results was analysed. The AuAg-SPR sensors had a higher sensitivity than the conventional Au-SPR sensors for detecting CA125 due to their electric field characteristics. Therefore, these will have better application prospects.

A Nanostructured Gold/Graphene Microfluidic Device for Direct and Plasmonic-Assisted Impedimetric Detection of Bacteria

Hierarchical 3D gold nano-/microislands (NMIs) are favorably structured for direct and probe-free capture of bacteria in optical and electrochemical sensors. Moreover, their unique plasmonic properties make them a suitable candidate for plasmonic-assisted electrochemical sensors, yet the charge transfer needs to be improved. In the present study, we propose a novel plasmonic-assisted electrochemical impedimetric detection platform based on hybrid structures of 3D gold NMIs and graphene (Gr) nanosheets for probe-free capture and label-free detection of bacteria. The inclusion of Gr nanosheets significantly improves the charge transfer, addressing the central issue of using 3D gold NMIs. Notably, the 3D gold NMIs/Gr detection platform successfully distinguishes between various types of bacteria including Escherichia coli (E. coli) K12, Pseudomonas putida (P. putida), and Staphylococcus epidermidis (S. epidermidis) when electrochemical impedance spectroscopy is applied under visible light. We show that distinguishable and label-free impedimetric detection is due to dissimilar electron charge transfer caused by various sizes, morphologies, and compositions of the cells. In addition, the finite-difference time-domain (FDTD) simulation of the electric field indicates the intensity of charge distribution at the edge of the NMI structures. Furthermore, the wettability studies demonstrated that contact angle is a characteristic feature of each type of captured bacteria on the 3D gold NMIs, which strongly depends on the shape, morphology, and size of the cells. Ultimately, exposing the platform to various dilutions of the three bacteria strains revealed the ability to detect dilutions as low as ∼20 CFU/mL in a wide linear range of detection of 2 × 10¹-10⁵, 2 × 10¹-10⁴, and 1 × 10²-1 × 10⁵ CFU/mL for E. coli, P. putida, and S. epidermidis, respectively. The proposed hybrid structure of 3D gold NMIs and Gr, combined by novel plasmonic and conventional impedance spectroscopy techniques, opens interesting avenues in ultrasensitive label-free detection of bacteria with low cost and high stability.

Graphene-Based Biosensors for Detection of Biomarkers

The development of biosensors with high sensitivity and low-detection limits provides a new direction for medical and personal care. Graphene and graphene derivatives have been used to prepare various types of biosensors due to their excellent sensing performance (e.g., high specific surface area, extraordinary electronic properties, electron transport capabilities and ultrahigh flexibility). This perspective review focuses on graphene-based biosensors for quantitative detection of cancer-related biomarkers such as DNA, miRNA, small molecules and proteins by integrating with different signal outputting approaches including fluorescent, electrochemistry, surface plasmon resonance, surface enhanced Raman scattering, etc. The article also discussed their challenges and potential solutions along with future prospects.

A Comprehensive Review: Development of Biosensors Based on Graphene-Mesoporous Combined Materials

Reliable data obtained from analysis of DNA, proteins, bacteria and other disease-related molecules or organisms in biological samples have become a fundamental and crucial part of human health diagnostics and therapy. After a brief summary of the implication of template based ordered mesoporous materials in electrochemical science, the various types of inorganic and organic-inorganic hybrid mesostructured used to date in electroanalysis and the corresponding electrode configurations are described. The development of non-invasive tests that are rapid, sensitive, specific and simple would allow patient discomfort to be prevented, delays in diagnosis to be avoided and the status of a disease to be followed up. The use of biosensors for the early diagnosis of diseases has become widely accepted as a point-of-care diagnosis with appropriate specificity in a short time. To allow a reliable diagnosis of a disease at an early stage, highly sensitive biosensors are required as the corresponding biomarkers are generally expressed at very low concentrations. In past 50 years, various biosensors have been researched and developed encompassing a wide range of applications. This contrasts the limited number of commercially available biosensors. Lately, graphene-based materials have been considered as superior over other nanomaterials for the development of sensitive biosensors. The advantages of graphenebased sensor interfaces are numerous, including enhanced surface loading of desired ligand due to the high surface-to-volume ratio, excellent conductivity and a small band gap that is beneficial for sensitive electrical and electrochemical read-outs, as well as tunable optical properties for optical read-outs such as fluorescence and plasmonics. In this paper, we review the advances made in recent years on graphenebased biosensors in the field of medical diagnosis.

Development of a Graphene-Based Surface Plasmon Resonance Optical Sensor Chip for Potential Biomedical Application

The emergence of unintentional poisoning and uncontrolled vector diseases have contributed to sensor technologies development, leading to the more effective detection of diseases. In this study, we present the combination of graphene-based material with surface plasmon resonance technique. Two different graphene-based material sensor chips were prepared for rapid and quantitative detection of dengue virus (DENV) and cobalt ion (Co2+) as an example of typical metal ions. As the fundamental concept of surface plasmon resonance (SPR) sensor that relies on the refractive index of the sensor chip surface, this research focused on the SPR signal when the DENV and Co2+ interact with the graphene-based material sensor chip. The results demonstrated that the proposed sensor-based graphene layer was able to detect DENV and Co2+ as low as 0.1 pM and 0.1 ppm respectively. Further details in the detection and quantification of analyte were also discussed in terms of sensitivity, affinity, and selectivity of the sensor.

Surface Plasmon Resonance (SPR) to Magneto-Optic SPR

In this editorial, a brief background of the surface plasmon resonance (SPR) principle is discussed, followed by several aspects of magneto-optic SPR (MOSPR) and sensing schemes from the viewpoint of fundamental studies and potential technological applications. New sensitivity metrics are introduced that would allow researchers to compare the performance of SPR and MOSPR-based sensors. Merits of MOSPR over SPR based sensors and challenges faced by MOSPR sensors in terms of their practical use and portability are also considered. The editorial ends with potential new configurations and future prospects. This work is considered highly significant to device engineers, graduate and undergraduate students, and researchers of all levels involved in developing new classes of bio-devices for sensing, imaging, environmental monitoring, toxic gas detection, and surveying applications to name a few.

Direct immobilization of sugar probes on bovine serum albumin-coated gold substrate for the development of glycan biosensors

Glycan biosensors based on surface plasmon resonance (SPR) spectroscopy have attracted a great deal of interest due to their potential applications in numerous biological and biomedical fields. Controlled immobilization of sugar probes on a gold substrate is believed to be critical for the performance of these SPR biosensors. In this regard, herein the authors report a direct coupling of mannose probes with bovine serum albumin (BSA) layer on the gold substrate via a squaric acid-mediated reaction under mild conditions, in which the BSA layer provides not only reactive amine groups but also a nonfouling surface property. SPR measurements show that the resultant biosensor with an appropriate amount of mannose probes exhibits high affinity to its corresponding lectin (i.e., concanavalin A) and at the same time could resist nonspecific adsorption of other lectins. The limit of detection of the current SPR biosensor is 1.9 nM. Thus, the squaric acid-mediated immobilization strategy appears to be effective and useful for the fabrication of bioanalytical devices.

Flexible and Electrically Tunable Plasmons in Graphene-Mica Heterostructures

Flexible plasmonic devices with electrical tunability are of great interest for diverse applications, such as flexible metamaterials, waveguide transformation optics, and wearable sensors. However, the traditional flexible metal-polymer plasmonic structures suffer from a lack of electrical tunability. Here the first flexible, electrically tunable, and strain-independent plasmons based on graphene-mica heterostructures are experimentally demonstrated. The resonance frequency, strength, quality factor, electrical tunability, and lifetime of graphene plasmons exhibit no visible change at bending radius down to 1 mm and after 1000 bending cycles at a radius of 3 mm. The plasmon-enhanced infrared spectroscopy detection of chemicals is also demonstrated to be unaffected in the flexible graphene-mica heterostructures. The results provide the basis for the design of flexible active nanophotonic devices such as plasmonic waveguides, resonators, sensors, and modulators.

Binding Kinetics of Methylene Blue on Monolayer Graphene Investigated by Multiparameter Surface Plasmon Resonance

In this paper, we study the interaction of a small dye molecule, namely, methylene blue (MB) with graphene surfaces using surface plasmon resonance (SPR). We show that by utilizing all of the parameters of the SPR angular dip and exploiting the fact that MB absorbs light at the operating wavelength, it is possible to detect the binding of small molecules that would otherwise not give a significant signal. The binding of MB to unmodified graphene is found to be stronger than that for gold. By studying the interaction at modified surfaces, we demonstrate that electrostatic effects play a dominant role in the binding of MB on to graphene. Furthermore, following the binding kinetics at various concentrations allows us to estimate apparent equilibrium binding and rate constants for the interaction of MB with graphene.

Graphene-based biosensors

Reliable data obtained from analysis of DNA, proteins, bacteria and other disease-related molecules or organisms in biological samples have become a fundamental and crucial part of human health diagnostics and therapy. The development of non-invasive tests that are rapid, sensitive, specific and simple would allow patient discomfort to be prevented, delays in diagnosis to be avoided and the status of a disease to be followed up. Bioanalysis is thus a progressive discipline for which the future holds many exciting opportunities. The use of biosensors for the early diagnosis of diseases has become widely accepted as a point-of-care diagnosis with appropriate specificity in a short time. To allow a reliable diagnosis of a disease at an early stage, highly sensitive biosensors are required as the corresponding biomarkers are generally expressed at very low concentrations. In the past 50 years, various biosensors have been researched and developed encompassing a wide range of applications. This contrasts the limited number of commercially available biosensors. When it comes to sensing of biomarkers with the required picomolar (pM) sensitivity for real-time sensing of biological samples, only a handful of sensing systems have been proposed, and these are often rather complex and costly. Lately, graphene-based materials have been considered as superior over other nanomaterials for the development of sensitive biosensors. The advantages of graphene-based sensor interfaces are numerous, including enhanced surface loading of the desired ligand due to the high surface-to-volume ratio, excellent conductivity and a small band gap that is beneficial for sensitive electrical and electrochemical read-outs, as well as tunable optical properties for optical read-outs such as fluorescence and plasmonics. In this paper, we review the advances made in recent years on graphene-based biosensors in the field of medical diagnosis.

Noble metal nanostructures in optical biosensors: Basics, and their introduction to anti-doping detection

Nanotechnology has illustrated significant potentials in biomolecular-sensing applications; particularly its introduction to anti-doping detection is of great importance. Illicit recreational drugs, substances that can be potentially abused, and drugs with dosage limitations according to the prohibited lists announced by the World Antidoping Agency (WADA) are becoming of increasing interest to forensic chemists. In this review, the theoretical principles of optical biosensors based on noble metal nanoparticles, and the transduction mechanism of commonly-applied plasmonic biosensors are covered. We review different classes of recently-developed plasmonic biosensors for analytic determination and quantification of illicit drugs in anti-doping applications. The important classes of illicit drugs include anabolic steroids, opioids, stimulants, and peptide hormones. The main emphasis is on the advantages that noble metal nano-particles bring to optical biosensors for signal enhancement and the development of highly sensitive (label-free) biosensors. In the near future, such optical biosensors may be an invaluable substitute for conventional anti-doping detection methods such as chromatography-based approaches, and may even be commercialized for routine anti-doping tests.

Refractive index sensor based on graphene-coated photonic surface-wave resonance

We propose a graphene-coated photonic system with the excitation of Bloch surface waves (BSWs) for refractive index sensing. Through manipulation of the BSW resonance in the truncated photonic crystal under a Kretschmann configuration, the absorption in a graphene monolayer is significantly enhanced, assisted by the strong electromagnetic confinement of BSWs. The sharp and low reflectivity dip and the strong wave-environment interaction enable highly sensitive optical sensing. First-order perturbation theory and transfer-matrix calculation indicate that the system sensitivity is strongly related to the ratio of the electric field energy in the detection area, operation wavelength, and incident angle. Study shows that the wavelength sensitivity and figure of merit of the optimized system can reach 7023  nm/RIU and 196.44, respectively. More generalized BSW system configurations, e.g., aperiodic BSW design, are proposed for refractive index sensing application.

Halloysite Nanotube-Modified Plasmonic Interface for Highly Sensitive Refractive Index Sensing

We propose and demonstrate a novel strategy to modify the plasmonic interface by using a thin layer of halloysite nanotubes (HNTs). The modified surface plasmon resonance (SPR) sensor achieves a greatly improved sensitivity because the large surface area and high refractive index of the HNTs layer significantly increase the probing electric field intensity and hence the measurement sensitivity. More significantly, the thickness of the HNTs layer can be tailored by spraying different concentrations of HNTs ethanol suspension. The proposed sensors show significant superiority in terms of the highest sensitivity (10431 nm/RIU) and the enhancement fold (5.6-folds) over those reported previously. Additionally, the proposed approach is a chemical-free and environment-friendly modification method for the sensor interface, without additional chemical or biological amplification steps (no toxic solvents are used). These unique features make the proposed HNTs-SPR biosensor a simple, biocompatible, and low-cost platform for the trace-level detection of biochemical species in a rapid, sensitive, and nondestructive manner.

Tuning Enzyme/α-Zr(IV) Phosphate Nanoplate Interactions via Chemical Modification of Glucose Oxidase

Using glucose oxidase (GOx) and α-Zr(IV) phosphate nanoplates (α-ZrP) as a model system, a generally applicable approach to control enzyme-solid interactions via chemical modification of amino acid side chains of the enzyme is demonstrated. Net charge on GOx was systematically tuned by appending different amounts of polyamine to the protein surface to produce chemically modified GOx(n), where n is the net charge on the enzyme after the modification and ranged from -62 to +95 electrostatic units in the system. The binding of GOx(n) with α-ZrP nanosheets was studied by isothermal titration calorimetry (ITC) as well as by surface plasmon resonance (SPR) spectroscopy. Pristine GOx showed no affinity for the α-ZrP nanosheets, but GOx(n) where n ≥ -20 showed binding affinities exceeding (2.1 ± 0.6) × 106 M-1, resulting from the charge modification of the enzyme. A plot of GOx(n) charge vs Gibbs free energy of binding (ΔG) for n = +20 to n = +65 indicated an overall increase in favorable interaction between GOx(n) and α-ZrP nanosheets. However, ΔG is less dependent on the net charge for n > +45, as evidenced by the decrease in the slope as charge increased further. All modified enzyme samples and enzyme/α-ZrP complexes retained a significant amount of folding structure (examined by circular dichroism) as well as enzymatic activities. Thus, strong control over enzyme-nanosheet interactions via modulating the net charge of enzymes may find potential applications in biosensing and biocatalysis.

Synthesis of a Pt/reduced graphene oxide/polydopamine composite material for localized surface plasmon resonance and methanol electrocatalysis

Pt NPs are synthesized and loaded with rGO onto ITO using polydopamine. The strongest LSPR effect corresponds to the optimal catalyst. The catalyst has a good anti-poison property against CO and shows good cycle stability.

Plasmonic resonances in hybrid systems of aluminum nanostructured arrays and few layer graphene within the UV-IR spectral range

The size-controllable and ordered Al nanocavities and nanodomes arrays were synthesized by electrochemical anodization of aluminum using phosphoric acid, citric acid and mixture both acids. Few layer graphene (FLG) was transferred directly on top of Al nanostructures and their morphology were evaluated by scanning electron microscopy. The interaction between FLG and the plasmonic properties of Al nanostructures arrays were investigated based on specular reflectivity in the ultraviolet-visible-infrared range and Raman spectroscopy. We found that their optical reflectivity was dramatically reduced as compared with unstructured Al. At the same time pronounced reflectivity dips were detectable in the 200-896 nm wavelength range, which were ascribed to plasmonic resonances. The plasmonic properties of these nanostructures do not exhibit evident changes by the presence of FLG in the UV-vis range of the electromagnetic spectrum. By contrast, the surface-enhanced Raman spectroscopy of FLG was observed in nanocavities and nanodomes structures that result in an intensity increase of the characteristic G and 2D bands of FLG induced by the plasmonic properties of Al nanostructures.

Binding Affinity of a Highly Sensitive Au/Ag/Au/Chitosan-Graphene Oxide Sensor Based on Direct Detection of Pb2+ and Hg2+ Ions

The study of binding affinity is essential in surface plasmon resonance (SPR) sensing because it allows researchers to quantify the affinity between the analyte and immobilised ligands of an SPR sensor. In this study, we demonstrate the derivation of the binding affinity constant, K, for Pb²⁺ and Hg²⁺ ions according to their SPR response using a gold/silver/gold/chitosan-graphene oxide (Au/Ag/Au/CS-GO) sensor for the concentration range of 0.1-5 ppm. The higher affinity of Pb²⁺ to binding with the CS-GO sensor explains the outstanding sensitivity of 2.05 °ppm^-1 against 1.66 °ppm^-1 of Hg²⁺. The maximum signal-to-noise ratio (SNR) upon detection of Pb²⁺ is 1.53, and exceeds the suggested logical criterion of an SNR. The Au/Ag/Au/CS-GO SPR sensor also exhibits excellent repeatability in Pb²⁺ due to the strong bond between its functional groups and this cation. The adsorption data of Pb²⁺ and Hg²⁺ on the CS-GO sensor fits well with the Langmuir isotherm model where the affinity constant, K, of Pb²⁺ and Hg²⁺ ions is computed. The affinity of Pb²⁺ ions to the Au/Ag/Au/CS-GO sensor is significantly higher than that of Hg²⁺ based on the value of K, 7 × 10⁵ M^-1 and 4 × 10⁵ M^-1, respectively. The higher shift in SPR angles due to Pb²⁺ and Hg²⁺ compared to Cr³⁺, Cu²⁺ and Zn²⁺ ions also reveals the greater affinity of the CS-GO SPR sensor to them, thus supporting the rationale for obtaining K for these two heavy metals. This study provides a better understanding on the sensing performance of such sensors in detecting heavy metal ions.

New Approach for Thickness Determination of Solution-Deposited Graphene Thin Films

Solution processing-based fabrication techniques such as liquid phase exfoliation may enable economically feasible utilization of graphene and related nanomaterials in real-world devices in the near future. However, measurement of the thickness of the thin film structures fabricated by these approaches remains a significant challenge. By using surface plasmon resonance (SPR), a simple, accurate, and quick measurement of the deposited thickness for inkjet-printed graphene thin films is reported here. We show that the SPR technique is convenient and well-suited for the measurement of thin films formulated from nanomaterial inks, even at sub-10 nm thickness. We also demonstrate that the analysis required to obtain results from the SPR measurements is significantly reduced compared to that required for atomic force microscopy (AFM) or stylus profilometer, and much less open to interpretation. The gathered data implies that the film thickness increases linearly with increasing number of printing repetitions. In addition, SPR also reveals the complex refractive index of the printed thin films composed of exfoliated graphene flakes, providing a more rigorous explanation of the optical absorption than that provided by a combination of AFM/profilometer and the extinction coefficient of mechanically exfoliated graphene flakes. Our results suggest that the SPR method may provide a new pathway for the thickness measurement of thin films fabricated from any nanomaterial containing inks.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Label-Free Sensing on Microarrays

Microarrays of biological molecules such as DNAs, proteins, carbohydrates, and small molecules provide a high-throughput platform for screening tens of thousands of biomolecular interactions simultaneously, facilitating the functional characterization of these biomolecules in areas of genomics, proteomics, glycomics, and cytomics. Routinely, analysis of binding reactions between solution-phased probes and surface-immobilized targets involves some kinds of fluorescence-based detection methods. Even though these methods have advantages of high sensitivity and wide dynamic range, labeling probes and/or targets inevitably changes their innate properties and in turn affects probe-target interactions in often uncharacterized ways. Therefore, in recent years, various label-free sensing technologies have been developed for characterizing biomolecular interactions in microarray format. These biosensors, to a certain extent, take the place of fluorescent methods by providing a comparable sensitivity as well as retaining the conformational and functional integrality of biomolecules to be investigated. More importantly, some of these biosensors are capable of real-time monitoring probe-target interactions, providing the binding affinities of these reactions. Using label-free biosensors in microarrays has become a current trend in developing high-throughput screening platforms for drug discoveries and applications in all areas of "-omics." This article is aimed to provide principles and recent developments in label-free sensing technologies applicable to microarrays, with special attentions being paid to surface plasmon resonance microscopy and oblique-incidence reflectivity difference microscopy.

A combined top-down/bottom-up approach to structuring multi-sensing zones on a thin film and the application to SPR sensors

The development of a thin film with well-defined metallic micro/nanostructures, diverse surface functionalities, and superior electronic/optical properties has been a great challenge to researchers seeking an efficient method for the detection of various analytes in chemical and biological sensing applications. Herein, we report a facile and effective approach to the fabrication of an ordered gold island pattern on a glass substrate with contrasted chemical functionalities, which can provide spatially separated sensing zones for multi-detection. In the proposed method, the combination between the micro/nano-imprint lithography and sequential self-assembly approaches exhibited synergistic effects that allowed well-defined structuring and easy surface functionalization in separated sensing zones. Via imprint lithography, the uniform gold islands/glass structure was successfully fabricated from a readily available gold-coated glass film. In addition, a sequential self-assembling strategy and specific chemical-substrate interactions, such as thiol-gold and silane-glass, enabled the surfaces of gold islands and exposed portions of the glass substrate with contrasting chemical functionalities-SH-functionalized gold islands and NH2-functionalized glass substrate. A proof-of-concept experiment for the multi-detection of heavy metal ions (Hg(2+) and Cu(2+)) in an aqueous media was also successfully conducted using the dual-functionalized gold islands/glass structure and surface plasmon resonance measurements. The SH groups on the gold islands and the NH2 groups on the glass substrate functioned as spatially separated and selective receptors for Hg(2+) and Cu(2+) ions, respectively. Therefore, both the detection and quantification of Hg(2+) and Cu(2+) ions could be achieved using a single sensing substrate.

Enhancement of surface plasmon resonance signals using a MIP/GNPs/rGO nano-hybrid film for the rapid detection of ractopamine

A novel surface plasmon resonance (SPR) sensor that uses molecular imprinted polymers (MIPs) coated with gold nanoparticles (GNPs) and reduced graphene oxide (rGO) as a sensing nano-hybrid film was developed for detection of ractopamine. The MIPs were synthesized by precipitation polymerization and characterized by scanning electron microscopy and Scatchard analysis. The GNPs/rGO composite was synthesized by a single-step reduction of graphene oxide and HAuCl4 solution. The MIP/GNPs/rGO nano-hybrid film was immobilized onto a bare sensor chip and exhibited remarkable sensitivity and stability by the “grafting to” method with the assistance of ionic liquid (IL) as a binder. The prepared sensor showed class-specific selectivity for ractopamine (RAC) and its analogs under optimized conditions. The novel SPR sensor had a wide linear range over an RAC concentration from 20 to 1000 ng/mL with a detection limit of 5 ng/mL (S/N=3). The results demonstrated that the MIP/GNPs/rGO nano-hybrid film was suitable as the recognition element of the SPR sensorfor rapid screening and detection of beta-agonists such as RAC.

Label-free femtomolar cancer biomarker detection in human serum using graphene-coated surface plasmon resonance chips

Sensitive and selective detection of cancer biomarkers is vital for the successful diagnosis of early stage cancer and follow-up treatment. Surface Plasmon Resonance (SPR) in combination with different amplification strategies is one of the analytical approaches allowing the screening of protein biomarkers in serum. Here we describe the development of a point-of-care sensor for the detection of folic acid protein (FAP) using graphene-based SPR chips. The exceptional properties of CVD graphene were exploited to construct a highly sensitive and selective SPR chip for folate biomarker sensing in serum. The specific recognition of FAP is based on the interaction between folic acid receptors integrated through π-stacking on the graphene coated SPR chip and the FAP analyte in serum. A simple post-adsorption of human serum:bovine serum albumin (HS:BSA) mixtures onto the folic acid modified sensor resulted in a highly anti-fouling interface, while keeping the sensing capabilities for folate biomarkers. This sensor allowed femtomolar (fM) detection of FAP, a detection limit well adapted and promising for quantitative clinical analysis.

Dopamine-assisted deposition and zwitteration of hyaluronic acid for the nanoscale fabrication of low-fouling surfaces

In this study, we proposed a bioinspired approach for the deposition and zwitteration of hyaluronic acid (HA) with a reduced glutathione (GSH) to form a composite layer that functions as a low fouling coating.