Evaluation of detection sensitivity in comprehensive two-dimensional liquid chromatography separations of an active pharmaceutical ingredient and its degradants

Modulation optimization when using a splitter pump after the first dimension in comprehensive two- dimensional liquid chromatography

The rapid growth in the use of two dimensional liquid chromatography (2D-LC) applied to the analysis of moderately to highly complex mixtures, has been fueled by continuous improvements in performance and robustness of the instrument components, as well as the ease-of-use of software necessary for controlling the 2D-LC instrument hardware, and analysis of the large data files that result from this type of work. This work has focused on the evaluation of the performance of an online full comprehensive mode (LC×LC), when an active modulation is implemented using a flow splitter pump placed after the 1D effluent. Two different types of splitting pumps were evaluated: a binary ultra-high pressure liquid chromatography (UHPLC) pump and a high precision syringe pump. We analyzed the performance (reproducibility in peak area and retention times and the 2D peak dispersion) as a function of the location of the active pump Before or After the modulation valve, and the influence of connecting tubes (based on internal diameter and length) necessary between the interface, waste, and the splitting pump. The effect on the flow direction on the filling and flushing of the injection loops at the modulation valve was also analyzed for each pump. In this study, we demonstrate that flow-splitting LCxLC assembly can be performed using either a UHPLC binary pump or a simple syringe pump. Flow splitting after the first dimension is a straightforward strategy to: (i) independently select the 1D column and flow rates with respect to the second dimension; (ii) consciously dilute the eluate according to the solvent characteristics of the second dimension, thereby avoiding 2D peak distortions; and (iii) adapt the injected amount to the second column according to the relative concentration of the components in a complex sample. However, careful consideration of the system setup is necessary. It is demonstrated how experimental results can be significantly affected in terms of peak broadening and reproducibility if optimization of the interface is not taken into account. In addition, under the optimized conditions, the reproducibility in peak area and dispersion in the 2D dimension were evaluated as a function of the amount of sample transferred in terms of percentage of filled loop.

Two-dimensional liquid chromatography with reversed phase in both dimensions: A review

Two-dimensional liquid chromatography (2D-LC), and in particular comprehensive two-dimensional liquid chromatography (LC×LC), offers increased peak capacity, resolution and selectivity compared to one-dimensional liquid chromatography. It is commonly accepted that the technique produces the best results when the separation mechanisms in the two dimensions are completely orthogonal; however, the use of similar separation mechanisms in both dimensions has been gaining popularity as it helps avoid difficulties related to mobile phase incompatibility and poor column efficiency. The remarkable advantages of using reversed phase in both dimensions (RPLC×RPLC) over other separation mechanisms made it a promising technique in the separation of complex samples. This review discusses some physical and practical considerations in method development for 2D-LC involving the use of RP in both dimensions. In addition, an extensive overview is presented of different applications that relied on RPLC×RPLC and 2D-LC with reversed phase column combinations to separate components of complex samples in different fields including food analysis, natural product analysis, environmental analysis, proteomics, lipidomics and metabolomics.

Development of a column switching for direct online enrichment and separation of polar and nonpolar analytes from aqueous matrices

Trace substances in surface waters may threaten health and pose a risk for the aquatic environment. Moreover, separation and detection by instrumental analysis is challenging due to the low concentration and the wide range of polarities. Separation of polar and nonpolar analytes can be achieved by using stationary phases with different selectivity. Lower limits of detection of trace substances can be obtained by offline enrichment on solid phase materials. However, these practices require substantial effort and are time consuming and costly. Therefore, in this study, a column switching was developed to enrich and separate both polar and nonpolar analytes by an on-column large volume injection of aqueous samples. The column switching can significantly reduce the effort and time for analyzing trace substances without compromising on separation and detection. A reversed phase (RP) column is used to trap the nonpolar analytes. The polar analytes are enriched on a porous graphitized carbon column (PGC) coupled serially behind the RP column. A novel valve switching system is implemented to enable elution of the nonpolar analytes from the RP column and, subsequently, elution of polar analytes from the PGC column and separation on a hydrophilic interaction liquid chromatography (HILIC) column. To enable separation of polar analytes dissolved in an aqueous matrix by HILIC, the water plug that is flushed from the PGC column is diluted by dosing organic solvent directly upstream of the HILIC column. The developed method was tested by applying target analysis and non-target screening, highlighting the advantage to effectively separate and detect both polar and nonpolar compounds in a single chromatographic run. In the target analysis, the analytes, with a logD at pH 3 ranging from -2.8 to + 4.5, could be enriched and separated. Besides the 965 features in the RP phase, 572 features from real wastewater were observed in the HILIC phase which would otherwise elute in the void time in conventional one-dimensional RP methods.

Temperature Responsive × Fast Chiral Comprehensive Liquid Chromatography: a New 2D-LC Platform for Resolving Mixtures of Chiral Isomers

Chiral resolution of solutes occurring in mixtures of unrelated species is of relevance in life sciences and in pharmaceutical analysis. While this is conceptually achievable by comprehensive two-dimensional liquid chromatography (LC × LC), few approaches exist whereby the second dimension comprises the chiral separation. The latter is preferable in combination with a conventional reversed phase type of separation in the first dimension as it offers an extension of a conventional achiral analysis. The implementation of such rapid chiral analyses in the second dimension was, thus far, limited by the challenging transfer of the first dimension mobile phase to the second dimension while still achieving chiral separation. In this study, the combination of temperature-responsive and reversed-phase chiral liquid chromatography is assessed in terms of enantioselective separation of a broad range of pharmaceutical compounds. Applying temperature-responsive liquid chromatography (TRLC) in the first dimension allows for analyses to be performed under purely aqueous conditions, which then allows for complete and more generic refocusing of (organic) solutes prior to the second dimension. This offers an enhanced ability to employ fast and broad compositional gradients over the chiral dimension, which broadens the applicability of the technique. In the proposed platform, seven chiral columns (superficially porous and fully porous columns (comprising both polysaccharide and macrocyclic antibiotic phases)) and four mobile phase gradients were screened on a pharmaceutical test mixture. The platform was shown to be able to offer the necessary resolving power for the molecules at hand and offers a new approach for chiral screening of mixtures of unrelated compounds.

Optimizing transfer and dilution processes when using active solvent modulation in on-line two-dimensional liquid chromatography

Two-dimensional liquid chromatography (2D-LC) is becoming increasingly popular for the analysis of complex samples, which is partly due to the recent introduction of commercial 2D-LC systems. To deal with the mobile phase incompatibility between highly orthogonal retention mechanisms, such as hydrophilic interaction liquid chromatography (HILIC) and reversed-phase LC (RPLC), several strategies have been introduced over the years. One of these strategies is active solvent modulation (ASM), a valve-based approach allowing the on-line dilution of the effluent eluting from the first dimension before transfer to the second dimension. This strategy has gained a lot of attention and holds great potential, however, no clear guidelines are currently in place for its use. Therefore, this study aims to investigate how the ASM process can be optimized when using highly incompatible LC combinations, such as HILIC and RPLC, in a simplified selective comprehensive 2D-LC set-up (sHILIC x RPLC) to suggest guidelines for future users. Using a representative sample, the dilution factor (DF), the duration of the ASM phase, the filling percentage of the sample loops, and their unloading configuration are investigated and optimized. It is observed that a DF of 10 with an optimal ASM phase duration, a sample loop filling of maximum 25%, and an unloading configuration in backflush mode, result in the best peak shapes, intensities, and recoveries for early eluting compounds, while keeping the total analysis time minimal. Based on these results, some general recommendations are made that could also be applied in other 2D-LC modes, such as comprehensive 2D-LC (LC x LC), heart-cutting 2D-LC (LC-LC), and other chromatographic combinations with mobile phase incompatibility issues.

Diluting modulation-based two dimensional-liquid chromatography coupled with mass spectrometry for simultaneously determining multiclass prohibited substances in cosmetics

Developing efficient and comprehensive screening methods for prohibited substances in cosmetics is critical for ensuring the quality and safety of cosmetics used in everyday life. This study proposed a heart-cutting two-dimensional liquid chromatography-mass spectrometry (2D-LC-MS) method based on online diluting modulation for detecting multiclass prohibited substances in cosmetics. The 2D-LC-MS method combines HILIC and RPLC techniques. Compounds near the dead time that the first dimensional HILIC could not separate were transferred to the second dimensional RPLC by valve switch, achieving good separation with a wide range of polarities. Moreover, the online diluting modulation solved the problem of mobile phase incompatibility, realizing an excellent column-head focusing effect and reducing the loss of sensitivity. Besides, the first dimensional analysis did not restrict the flow rate of the second dimensional analysis owing to the diluting modulation. We demonstrated the 2D-LC-MS system by determining 126 prohibited substances in cosmetic products, including hormones, local anesthetics, anti-infectives, adrenergic agents, antihistamines, pesticides, and other chemicals. All correlation coefficients of the compounds were above 0.9950. The LODs and the LOQs ranged from 0.000259 ng/mL to 16.6 ng/mL and 0.000864 ng/mL to 55.3 ng/mL, respectively. The RSDs% for intra-day and inter-day precision were within 6% and 14%, respectively. Compared with conventional one-dimensional liquid chromatography methods, the established method expanded the analytical coverage of cosmetics-prohibited substances with reduced matrix effects for most compounds and improved sensitivity for polar analytes. The results indicated that the 2D-LC-MS method was a powerful tool for screening multiclass prohibited substances in cosmetics.

A tandem liquid chromatography and tandem mass spectrometry (LC/LC-MS/MS) technique to separate and quantify steroid isomers 11β-methyl-19-nortestosterone and testosterone

Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) has become a mainstay analytical technique in pharmaceutical research and development and clinical diagnosis due to several advantages including excellent selectivity, specificity, and high sensitivity. LC-MS/MS has become the method of choice for steroids analysis due to its fast analytical time and improved specificity yet has a challenge in the separation and measurement of isomers with the same product ions. Here we describe a high-sensitivity LC/LC-MS/MS method that combines chiral chromatography and reverse-phase chromatography (LC/LC) along with MS/MS to rapidly separate and quantify steroid isomers of 11ß-methyl-19-nortestosterone (11ß-MNT) and endogenous testosterone in serum.

Strategies to circumvent the solvent strength mismatch problem in online comprehensive two-dimensional liquid chromatography

On-line comprehensive two-dimensional liquid chromatography is a powerful technique for the separation of highly complex samples. Due to the addition of the second dimension of separation, impressive peak capacities can be obtained within a reasonable analysis time compared to one-dimensional liquid chromatography. In online comprehensive two-dimensional liquid chromatography, the separation power is maximized by selecting two separation dimensions as orthogonal as possible, which most often requires the combination of different mobile phases and stationary phases. The online transfer of a given solvent from the first dimension to the second dimension may cause severe injection effects in the second dimension, mostly due to solvent strength mismatch. Those injection effects may include peak broadening, peak distortion, peak splitting or breakthrough phenomenon. They are often found to reduce significantly the peak capacity and the peak intensity. To overcome such effects, arising specifically in online comprehensive two-dimensional liquid chromatography, different methods have been developed over the years. In this review, we focused on the most recently reported ones. A critical discussion, supported by a theoretical approach, gives an overview of their advantages and drawbacks.

Reversed phase versus hydrophilic interaction liquid chromatography as first dimension of comprehensive two-dimensional liquid chromatography systems for the elucidation of the polyphenolic content of food and natural products

Comprehensive two-dimensional liquid chromatography is a well-established method for the unraveling of very complex real-world samples. With regard to food and natural products such a technique turned out to be a very promising approach due to its high resolving power and improved identification capability, especially in combination with mass spectrometry. In this context, polyphenols comprise a particular complex class of bioactive compounds, due to their nature and content in commonly consumed foodstuffs, making their analysis challenging. The present contribution shows an overview of the two commonly employed approaches used for polyphenol analysis, viz. RP-LC × RP-LC and HILIC × RP-LC. Furthermore, the latest implementations as well as limitations and future perspectives are critically reported.

Comparison of existing strategies for keeping symmetrical peaks in on-line Hydrophilic Interaction Liquid Chromatography x Reversed-Phase Liquid Chromatography despite solvent strength mismatch

In two-dimensional liquid chromatography, the combination of hydrophilic interaction liquid chromatography (HILIC) and reversed-phase liquid chromatography (RPLC) is very attractive due to the complementarity of their separation mechanisms. On-line comprehensive HILIC x RPLC is well-known to give rise to a large retention space coverage when dealing with ionisable compounds. However, method development in on-line HILIC x RPLC is challenging due to the reversed solvent strength between both dimensions, which can greatly affect the peak shapes in the second RPLC dimension, and thus the separation quality and the method sensitivity. In the present contribution, we compared four strategies designed to avoid this problem: (1) flow splitting, which consists in reducing the injection volume in the second dimension (²D), (2) on-line dilution with a make-up flow and (3) on-line dilution with Active Solvent Modulation (ASM), which both consist in reducing the solvent strength of the injected fractions, and (4) Total Breakthrough Strategy, which we recently proposed. Unlike the three preceding strategies, this latter one consists in injecting large volumes of strong solvent in ²D. The performance of each strategy was evaluated for sub-hour separations of a tryptic digest in on-line HILIC x RPLC. In this work, we considered the critical case for which the same column internal diameters (i.e. 2.1 mm here) are used in both dimensions. Peak capacity, peak shapes and peak intensities were considered for this evaluation. The highest peak capacity could be achieved with Total Breakthrough Strategy while the lowest one with on-line dilution using ASM. Peak intensities were usually higher with on-line dilution approaches (make-up flow and ASM). However, despite the presence of breakthrough, peak intensities were approximately 7-fold higher with Total Breakthrough Strategy than with flow splitting.

Achiral-Chiral Two-Dimensional Liquid Chromatography Platform to Support Automated High-Throughput Experimentation in the Field of Drug Development

Automated high-throughput experimentation (HTE) is a powerful tool for scientists to explore and optimize chemical transformations by simultaneously screening yield, stereoselectivity, and impurity profiles. To analyze the HTE samples, high-throughput analysis (HTA) platforms must be fast, accurate, generic, and specific at the same time. A large amount of high-quality data is critical for the success of machine learning models in the era of big data. Conventional chiral liquid chromatography-mass spectrometry (LC/MS) HTE methods are hampered by compound co-eluting, possible ion suppression, and limited chiral column lifetime in the presence of crude reaction mixtures or complex sample matrices. To overcome these limitations, a generic and fast achiral-chiral heart-cutting two-dimensional (2D)-LC method has been developed to determine both the yield and stereoselectivity of chemical transformations within a 10 min run time. Successful implementation of the 2D-LC HTA platform in a routine drug development environment was achieved for real-world project support, with the analysis so far of over 2000 reaction mixtures prepared in the 96-well plate format. Excellent performance of the method was demonstrated by relative standard deviation (RSD) lower than 0.83% for the ¹D and ²D retention times, and determination coefficients higher than 0.99. The presented HTA 2D-LC platform has had a significant impact on drug development by analyzing the HTE samples rapidly with unambiguous peak tracking and providing a robust approach for accurately generating a large amount of high-quality data in a short time.

Analytical Chemistry in the 21st Century: Challenges, Solutions, and Future Perspectives of Complex Matrices Quantitative Analyses in Biological/Clinical Field

Nowadays, the challenges in analytical chemistry, and mostly in quantitative analysis, include the development and validation of new materials, strategies and procedures to meet the growing need for rapid, sensitive, selective and green methods. In this context, considering the constantly updated International Guidelines, constant innovation is mandatory both in the pre-treatment procedures and in the instrumental configurations to obtain reliable, true, and reproducible information. In this context, additionally to the classic plasma (or serum) matrices, biopsies, whole blood, and urine have seen an increase in the works that also consider non-conventional matrices. Obviously, all these studies have shown that there is a correlation between the blood levels and those found in the new matrix, in order to be able to correlate and compare the results in a robust way and reduce any bias problems. This review provides an update of the most recent developments currently in use in the sample pre-treatment and instrument configurations in the biological/clinical fields. Furthermore, the review concludes with a series of considerations regarding the role and future developments of Analytical Chemistry in light of the forthcoming challenges and new goals to be achieved.

Pharmaceutical impurity analysis by comprehensive two-dimensional temperature responsive × reversed phase liquid chromatography

In this study, the possibilities of temperature responsive × reversed phase liquid chromatography (TRLC × RPLC) are assessed in terms of pharmaceutical impurity analysis. Due to the increased peak capacity per unit time they offer, two-dimensional LC approaches are gaining relevance for the analysis of complex drug formulations. Because the latter depicts a larger predisposition for the occurrence of an increased number of impurities, current 1D-HPLC approaches often prove insufficient. Since many LC × LC methods are limited by modulation, solvent compatibility, orthogonality, and sensitivity issues, the combination of TRLC × RPLC is explored in this work for pharmaceutical impurity analysis. As this combination of a purely aqueous separation with RPLC allows for systematic and optimization-free refocusing in the second dimension, it opens possibilities for generic LC × LC requiring minimal to no method development, in this way overcoming a major perceived contemporary hurdle of LC × LC. The approach is demonstrated with a representative mixture of 17 solutes comprising 11 corticosteroids and 6 progestogens. Orthogonality and peak capacities were assessed on three RP core-shell column selectivities (Poroshell EC-C18, phenyl-hexyl and PFP). Although the TRLC × EC-C18 combination offered somewhat better orthogonality, the combination with the PFP column proved the best for the separation at hand. Depending on the composition of the mixture, the use of full, shifted, or segmented gradients allowed facile optimization of the separation. The developed platform allowed detection of the impurities at the 0.05% level compared to a selected main compound, while also opening up possibilities for analysis of formulations comprising two active ingredients.

Living with Breakthrough: Two-Dimensional Liquid-Chromatography Separations of a Water-Soluble Synthetically Grafted Bio-Polymer

In this study, we evaluate the use of various two-dimensional liquid chromatographic methods to characterize water-soluble, synthetically grafted bio-polymers, consisting of long poly(acrylic acid) chains and short maltodextrin grafts. The confirmation of the presence of grafting and the estimation of its extent is challenging. It is complicated by the limited solubility of polymers, their structural dispersity and chemical heterogeneity. Moreover, the starting materials (and other reagents, reaction products and additives) may be present in the product. Reversed-phase liquid chromatography (RPLC), hydrophilic-interaction liquid chromatography (HILIC) and size-exclusion chromatography (SEC) were used to characterize the product, as well as the starting materials. Additionally, fractions were collected for off-line characterization by infrared spectroscopy and mass spectrometry. The one-dimensional separation methods were found to be inconclusive regarding the grafting question. Breakthrough (the early elution of polymer fractions due to strong injection solvents) is shown to be a perpetual problem. This issue is not solved by comprehensive two-dimensional liquid chromatography (LC × LC), but information demonstrating the success of the grafting reaction could be obtained. SEC × RPLC and HILIC × RPLC separations are presented and discussed.

Compensate for or Minimize Matrix Effects? Strategies for Overcoming Matrix Effects in Liquid Chromatography-Mass Spectrometry Technique: A Tutorial Review

In recent decades, mass spectrometry techniques, particularly when combined with separation methods such as high-performance liquid chromatography, have become increasingly important in pharmaceutical, bio-analytical, environmental, and food science applications because they afford high selectivity and sensitivity. However, mass spectrometry has limitations due to the matrix effects (ME), which can be particularly marked in complex mixes, when the analyte co-elutes together with other molecules, altering analysis results quantitatively. This may be detrimental during method validation, negatively affecting reproducibility, linearity, selectivity, accuracy, and sensitivity. Starting from literature and own experience, this review intends to provide a simple guideline for selecting the best operative conditions to overcome matrix effects in LC-MS techniques, to obtain the best result in the shortest time. The proposed methodology can be of benefit in different sectors, such as pharmaceutical, bio-analytical, environmental, and food sciences. Depending on the required sensitivity, analysts may minimize or compensate for ME. When sensitivity is crucial, analysis must try to minimize ME by adjusting MS parameters, chromatographic conditions, or optimizing clean-up. On the contrary, to compensate for ME analysts should have recourse to calibration approaches depending on the availability of blank matrix. When blank matrices are available, calibration can occur through isotope labeled internal standards and matrix matched calibration standards; conversely, when blank matrices are not available, calibration can be performed through isotope labeled internal standards, background subtraction, or surrogate matrices. In any case, an adjusting of MS parameters, chromatographic conditions, or a clean-up are necessary.

Perspectives on the future of multi-dimensional platforms

Two-dimensional liquid chromatography (2D-LC) formats have emerged to help address separation problems that are too complex for conventional one-dimensional LC. There are a number of obstacles to the proliferation of 2D-LC that are gradually being removed. Reliable commercial instrumentation has become available and data analysis software is being improved. Detector-sensitivity and phase-system compatibility issues can largely be solved by using active-modulation strategies. The remaining challenge, developing good and fast 2D-LC methods within a reasonable time, may be solved with smart algorithms. The technology platform that has been developed for 2D-LC also creates a number of other possibilities. Between the two separation stages, all kinds of physical (e.g. dissolution) or chemical (e.g. enzymatic or light-induced degradation) processes can be made to take place, allowing a wide variety of experiments to be performed within a single, efficient and automated analysis. All these developments are discussed in this paper and a number of critical issues are identified. A practical example, the characterization of polysorbates by high-resolution comprehensive two-dimensional liquid chromatography in combination with high-resolution mass spectrometry, is described as a culmination of recent developments in 2D-LC and as an illustration of the current state of the art.

Recent Trends in Fast Liquid Chromatography for Pharmaceutical Analysis

Background:

Liquid chromatography is the workhorse of analytical laboratories of pharmaceutical companies for analysis of bulk drug materials, intermediates, drug products, impurities and degradation products. This efficient technique is impeded by its long and tedious analysis procedures. Continuous efforts of scientists to reduce the analysis time resulted in the development of three different approaches namely, HTLC, chromatography using monolithic columns and UHPLC.

Methods:

Modern column technology and advances in chromatographic stationary phase including silica-based monolithic columns and reduction in particle and column size (UHPLC) have not only revolutionized the separation power of chromatographic analysis but also have remarkably reduced the analysis time. Automated ultra high-performance chromatographic systems equipped with state-ofthe- art software and detection systems have now spawned a new field of analysis, termed as Fast Liquid Chromatography (FLC). The chromatographic approaches that can be included in FLC are hightemperature liquid chromatography, chromatography using monolithic column, and ultrahigh performance liquid chromatography.

Results:

This review summarizes the progress of FLC in pharmaceutical analysis during the period from year 2008 to 2017 focusing on detecting pharmaceutical drugs in various matrices, characterizing active compounds of natural products, and drug metabolites. High temperature, change in the mobile phase, use of monolithic columns, new non-porous, semi-porous and fully porous reduced particle size of/less than 3μm packed columns technology with high-pressure pumps have been extensively studied and successively applied to real samples. These factors revolutionized the fast high-performance separations.

Conclusion:

Taking into account the recent development in fast liquid chromatography approaches, future trends can be clearly predicated. UHPLC must be the most popular approach followed by the use of monolithic columns. Use of high temperatures during analysis is not a feasible approach especially for pharmaceutical analysis due to thermosensitive nature of analytes.

Comprehensive Three-Dimensional LC × LC × Ion Mobility Spectrometry Separation Combined with High-Resolution MS for the Analysis of Complex Samples

Comprehensive two-dimensional liquid chromatography (LC × LC) and ion mobility spectrometry-mass spectrometry (IMS-MS) are increasingly being used to address challenges associated with the analysis of highly complex samples. In this work, we evaluate the potential of the combination of these techniques in the form of a comprehensive three-dimensional LC × LC × IMS separation system. As application, hydrophilic interaction chromatography (HILIC) × reversed phase LC (RP-LC) × IMS-high-resolution MS (HR-MS) was used to analyze a range of phenolic compounds, including hydrolyzable and condensed tannins, flavonoids, and phenolic acids in several natural products. A protocol for the extraction and visualization of the four-dimensional data obtained using this approach was developed. We show that the combination of HILIC, RP-LC, and IMS offers excellent separation of complex phenolic samples in three dimensions. Benefits associated with the incorporation of IMS include improved MS sensitivity and mass-spectral data quality. IMS also provided separation of trimeric procyanidin isomeric species that could not be differentiated by HILIC × RP-LC or HR-MS. On the traveling wave IMS (TWIMS) system used here, both IMS separation performance and the extent of second dimension (²D) undersampling depend on the upper mass scan limit, which might present a limitation for the analysis of larger molecular ions. The performance of the LC × LC × IMS system was characterized in terms of practical peak capacity and separation power, using established theory and taking undersampling and orthogonality into account. An average increase in separation performance by a factor of 13 was found for the samples analyzed here when IMS was incorporated into the HILIC × RP-LC-MS workflow.

The application of on-line two-dimensional liquid chromatography (2DLC) in the chemical analysis of herbal medicines

Herbal medicines are complicated chemical systems containing hundreds of small molecules of various polarities, structural types, and contents. Thus far, the chromatographic separation of herbal extracts is still a big challenge. Two-dimensional liquid chromatography (2DLC) has become an attractive separation tool in the past few years. Particularly, a lot of attention has been paid to on-line 2DLC. In this review, we aim to give an overview on applications of on-line 2DLC in the chemical analysis of herbal medicines since 2010. Firstly, classification and general configurations of on-line 2DLC were briefly introduced. Then, we summarized main applications in herbal medicines of heart-cutting 2DLC (LC-LC), comprehensive 2DLC (LC × LC), and their combinations, with emphasis on LC × LC. Mass spectrometry is the most popular detector coupled with 2DLC, which allows sensitive and accurate structural characterization of herbal compounds. Finally, future developments in on-line 2DLC techniques were also discussed.

Enhancing the Possibilities of Comprehensive Two-Dimensional Liquid Chromatography through Hyphenation of Purely Aqueous Temperature-Responsive and Reversed-Phase Liquid Chromatography

Comprehensive two-dimensional liquid chromatography (LC × LC) allows for substantial gains in theoretical peak capacity in the field of liquid chromatography. However, in practice, theoretical performance is rarely achieved due to a combination of undersampling, orthogonality, and refocusing issues prevalent in many LC × LC applications. This is intricately linked to the column dimensions, flow rates, and mobile-phase compositions used, where, in many cases, incompatible or strong solvents are introduced in the second-dimension (²D) column, leading to peak broadening and the need for more complex interfacing approaches. In this contribution, the combination of temperature-responsive (TR) and reversed-phase (RP) LC is demonstrated, which, due to the purely aqueous mobile phase used in TRLC, allows for complete and more generic refocusing of organic solutes prior to the second-dimension RP separation using a conventional 10-port valve interface. Thus far, this was only possible when combining other purely aqueous modes such as ion exchange or gel filtration chromatography with RPLC, techniques which are limited to the analysis of charged or high MW solutes, respectively. This novel TRLC × RPLC combination relaxes undersampling constraints and complete refocusing and therefore offers novel possibilities in the field of LC × LC including temperature modulation. The concept is illustrated through the TRLC × RPLC analysis of mixtures of neutral organic solutes.

Optimizing separations in online comprehensive two-dimensional liquid chromatography

Online comprehensive two-dimensional liquid chromatography has become an attractive option for the analysis of complex nonvolatile samples found in various fields (e.g. environmental studies, food, life, and polymer sciences). Two-dimensional liquid chromatography complements the highly popular hyphenated systems that combine liquid chromatography with mass spectrometry. Two-dimensional liquid chromatography is also applied to the analysis of samples that are not compatible with mass spectrometry (e.g. high-molecular-weight polymers), providing important information on the distribution of the sample components along chemical dimensions (molecular weight, charge, lipophilicity, stereochemistry, etc.). Also, in comparison with conventional one-dimensional liquid chromatography, two-dimensional liquid chromatography provides a greater separation power (peak capacity). Because of the additional selectivity and higher peak capacity, the combination of two-dimensional liquid chromatography with mass spectrometry allows for simpler mixtures of compounds to be introduced in the ion source at any given time, improving quantitative analysis by reducing matrix effects. In this review, we summarize the rationale and principles of two-dimensional liquid chromatography experiments, describe advantages and disadvantages of combining different selectivities and discuss strategies to improve the quality of two-dimensional liquid chromatography separations.

Multiple heart-cutting two dimensional liquid chromatography quadrupole time-of-flight mass spectrometry of pyrrolizidine alkaloids

Pyrrolizidine alkaloids (PAs) and their and the corresponding N-oxides (PAs-ox) are genotoxic plant metabolites which can be present as unwanted contaminants in food products of herbal origin like tea and food supplements. PAs and PAs-ox come in a wide variety of molecular structures including many structural isomers. For toxicity assessment it is important to determine the composition of a sample and to resolve all isomeric PAs and PAs-ox, which is currently not possible in one liquid or gas chromatographic (LC or GC) run. In this study an online two dimensional liquid chromatography quadrupole time-of-flight mass spectrometry (2D-LC QToF-MS) method was developed to resolve isomeric PAs and PAs-ox. After comprehensive column and mobile phase selection a polar endcapped C₁₈ column was used at pH 3 in the first dimension, and a cross-linked C₁₈ column at pH 10 in the second dimension. Injection solvents, column IDs, flow rates and temperatures were carefully optimized. The method with column selection valve switching described in this study was able to resolve and visualize 20 individual PAs/PAs-ox (6 sets of isomers) in one 2D-LC QToF-MS run. Moreover, it was shown that all isomeric PAs/PAs-ox could be unambiguously annotated. The method was shown to be applicable for the determination and quantification of isomeric PAs/PAs-ox in plant extracts and could be easily extended to include other PAs and PAs-ox.

Restriction capillaries as an innovative mixing unit for intermediate mobile phase exchange in multidimensional analysis

A novel mixing unit is proposed for the serial coupling of orthogonal columns to analyze polar and non-polar compounds in a single run. The principle relies on the isolation of unretained peaks eluting from a first dimension column in a sample loop, before directing them to a second column for separation. Since the mobile phases employed in highly orthogonal separations are not directly compatible, a mixing unit is required to alter the mobile phase composition before executing the second dimension separation. The mixing unit proposed in this work is based on the use of two restriction capillaries with different flow resistances to dilute the mobile phase eluting from the first dimension with a solvent appropriate for the second dimension separation. The restriction capillaries are implemented in an ultra-high performance liquid chromatography set-up using three high-pressure switching valves and two T-pieces. It is demonstrated that the dilution ratio can be adequately predicted using the law of Hagen-Poiseuille and can be adjusted easily by changing the dimensions of the restriction capillaries. The dilution volume required to obtain acceptable recoveries is investigated and the use of different column diameters in the first and second dimension is proposed to increase the sensitivity of the analysis. Under optimum dilution conditions, recoveries ranging between 82% and 99% are always obtained, while repeatability values are excellent. The proof-of-concept of the different set-ups is demonstrated for the separation of 20 pharmaceuticals with log D-values ranging between -5.75 and 4.22.

Validation of a two-dimensional liquid chromatography method for quality control testing of pharmaceutical materials

Despite the advantages of 2D-LC, there is currently little to no work in demonstrating the suitability of these 2D-LC methods for use in a quality control (QC) environment for good manufacturing practice (GMP) tests. This lack of information becomes more critical as the availability of commercial 2D-LC instrumentation has significantly increased, and more testing facilities begin to acquire these 2D-LC capabilities. It is increasingly important that the transferability of developed 2D-LC methods be assessed in terms of reproducibility, robustness and performance across different laboratories worldwide. The work presented here focuses on the evaluation of a heart-cutting 2D-LC method used for the analysis of a pharmaceutical material, where a key, co-eluting impurity in the first dimension (¹D) is resolved from the main peak and analyzed in the second dimension (²D). A design-of-experiments (DOE) approach was taken in the collection of the data, and the results were then modeled in order to evaluate method robustness using statistical modeling software. This quality by design (QBD) approach gives a deeper understanding of the impact of these 2D-LC critical method attributes (CMAs) and how they affect overall method performance. Although there are multiple parameters that may be critical from method development point of view, a special focus of this work is devoted towards evaluation of unique 2D-LC critical method attributes from method validation perspective that transcend conventional method development and validation. The 2D-LC method attributes are evaluated for their recovery, peak shape, and resolution of the two co-eluting compounds in question on the ²D. In the method, linearity, accuracy, precision, repeatability, and sensitivity are assessed along with day-to-day, analyst-to-analyst, and lab-to-lab (instrument-to-instrument) assessments. The results of this validation study demonstrate that the 2D-LC method is accurate, sensitive, and robust and is ultimately suitable for QC testing with good method transferability.

High-throughput determination of vancomycin in human plasma by a cost-effective system of two-dimensional liquid chromatography

Therapeutic drug monitoring (TDM) is one of the most important services of clinical laboratories. Two main techniques are commonly used: the immunoassay and chromatography method. We have developed a cost-effective system of two-dimensional liquid chromatography with ultraviolet detection (2D-LC-UV) for high-throughput determination of vancomycin in human plasma that combines the automation and low start-up costs of the immunoassay with the high selectivity and sensitivity of the liquid chromatography coupled with mass spectrometric detection without incurring their disadvantages, achieving high cost-effectiveness. This 2D-LC system offers a large volume injection to provide sufficient sensitivity and uses simulated gradient peak compression technology to control peak broadening and to improve peak shape. A middle column was added to reduce the analysis cycle time and make it suitable for high-throughput routine clinical assays. The analysis cycle time was 4min and the peak width was 0.8min. Compared with other chromatographic methods that have been developed, the analysis cycle time and peak width for vancomycin was reduced significantly. The lower limit of quantification was 0.20μg/mL for vancomycin, which is the same as certain LC-MS/MS methods that have been recently developed and validated. The method is rapid, automated, and low-cost and has high selectivity and sensitivity for the quantification of vancomycin in human plasma, thus making it well-suited for use in hospital clinical laboratories.

Ultrafast Chiral Chromatography as the Second Dimension in Two-Dimensional Liquid Chromatography Experiments

Chromatographic separation and analysis of complex mixtures of closely related species is one of the most challenging tasks in modern pharmaceutical analysis. In recent years, two-dimensional liquid chromatography (2D-LC) has become a valuable tool for improving peak capacity and selectivity. However, the relatively slow speed of chiral separations has limited the use of chiral stationary phases (CSPs) as the second dimension in 2D-LC, especially in the comprehensive mode. Realizing that the recent revolution in the field of ultrafast enantioselective chromatography could now provide significantly faster separations, we herein report an investigation into the use of ultrafast chiral chromatography as a second dimension for 2D chromatographic separations. In this study, excellent selectivity, peak shape, and repeatability were achieved by combining achiral and chiral narrow-bore columns (2.1 mm × 100 mm and 2.1 mm × 150 mm, sub-2 and 3 μm) in the first dimension with 4.6 mm × 30 mm and 4.6 mm × 50 mm columns packed with highly efficient chiral selectors (sub-2 μm fully porous and 2.7 μm fused-core particles) in the second dimension, together with the use of 0.1% phosphoric acid/acetonitrile eluents in both dimensions. Multiple achiral × chiral and chiral × chiral 2D-LC examples (single and multiple heart-cutting, high-resolution sampling, and comprehensive) using ultrafast chiral chromatography in the second dimension are successfully applied to the separation and analysis of complex mixtures of closely related pharmaceuticals and synthetic intermediates, including chiral and achiral drugs and metabolites, constitutional isomers, stereoisomers, and organohalogenated species.