Analysis of trace fibers by IR-MALDESI imaging coupled with high resolving power MS

Laser-based analytical techniques in cultural heritage science - Tutorial review

This tutorial review combines the fundamentals of the design and operation of lasers with their usage in applications related to conservation and cultural heritage (CH) science - as components of analytical devices for the study of the chemical composition of materials. The development of laser instruments and their fundamental physical background, including a short explanation of their properties and parameters, are briefly summarised, and an overview of different laser-based analytical techniques is given. The analytical techniques covered in this tutorial are divided into three groups based on their technical aspects and properties: (1) vibrational spectroscopy, (2) elemental analysis, and (3) different molecular mass spectrometric techniques.

Development and Application of Desorption Electrospray Ionization Mass Spectrometry for Historical Dye Analysis

A desorption electrospray ionization (DESI) source was built and attached to a Bruker 7T SolariX FT-ICR-MS for the in situ analysis of 14 early synthetic dyestuffs. Optimization using silk and wool cloths dyed with rhodamine B concluded that when using a commercial electrospray emitter (part number: 0601815, Bruker Daltonik), a nebulizing gas (N₂) pressure of 3.9 bar and a sprayer voltage of 4.5 kV (positive ionization mode) or 4.2 kV (negative ionization mode), a solvent system of 3:1 v/v ACN:H₂O, and a sprayer incident angle, α, of 35° gave the highest signal-to-noise ratios on both silk and wool for the samples investigated. The system was applied to modern early synthetic dye references on silk and wool as well as historical samples from the 1893 edition of Adolf Lehne's Tabellarische Übersicht über die künstliche organischen Farbstoffe und ihre Anwendung in Färberei und Zeugdruck [Tabular overview of the synthetic organic dyestuffs and their use in dyeing and printing]. The successful analysis of six chemically different dye families in both negative and positive modes showed the presence of known degradation products and byproducts arising from the original synthetic processes in the historical samples. This study demonstrates the applicability and potential of DESI-MS to the field of historical dye analysis.

The development and application of matrix assisted laser desorption electrospray ionization: The teenage years

In the past 15 years, ambient ionization techniques have witnessed a significant incursion into the field of mass spectrometry imaging, demonstrating their ability to provide complementary information to matrix-assisted laser desorption ionization. Matrix-assisted laser desorption electrospray ionization is one such technique that has evolved since its first demonstrations with ultraviolet lasers coupled to Fourier transform-ion cyclotron resonance mass spectrometers to extensive use with infrared lasers coupled to orbitrap-based mass spectrometers. Concurrently, there have been transformative developments of this imaging platform due to the high level of control the principal group has retained over the laser technology, data acquisition software (RastirX), instrument communication, and image processing software (MSiReader). This review will discuss the developments of MALDESI since its first laboratory demonstration in 2005 to the most recent advances in 2021.

Directly Mapping the Spatial Distribution of Organic Compounds on Mineral Rock Surfaces by DESI and LAESI Mass Spectrometry Imaging

Here, we present a new application of desorption electrospray ionization (DESI) and laser ablation electrospray ionization (LAESI) mass spectrometry imaging to assess the spatial location of organic compounds, both polar and nonpolar, directly from rock surfaces. Three carbonaceous rocks collected from an aquatic environment and a berea sandstone subjected to a small-scale oil recovery experiment were analyzed by DESI and LAESI. No rock pretreatment was required before DESI and LAESI analyses. DESI detected and spatially mapped several fatty acids and a disaccharide on the surfaces of carbonaceous rocks, and various nitrogenated and oxygenated compounds on the surfaces of berea sandstone. In contrast, LAESI using a 3.4 μm infrared laser beam was able to detect and map hydrocarbons on the surfaces of all rock samples. Both techniques can be combined to analyze polar and nonpolar compounds. DESI can be used first to detect polar compounds, as it does not destroy the rock surface, and LAESI can then be used to analyze nonpolar analytes, as it destroys a layer of the sample surface. Both techniques have the potential to be used in several scientific areas involving rocks and minerals, such as in the analysis of industry-derived contaminants in aquatic sediments or in small-scale rock-fluid interaction experiments.

Infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry imaging analysis of endogenous metabolites in cherry tomatoes

We report the spatially resolved metabolic profiling of cherry tomatoes using infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI), a mass spectrometry imaging (MSI) technique that operates at ambient conditions and requires no sample derivatization. Tomatoes were flash frozen, cryosectioned and imaged with adequate spatial resolution to distinguish between the major tissue structures of a tomato including the skin, mesocarp, endocarp, locular tissue, septum, placenta, seed and seed coating. Metabolites were imaged from 100-1200 m/z, enabling significant coverage of a diverse array of metabolites including amino acids and lipids along with the major secondary metabolite classes: terpenes, phenolics, glycosides, and alkaloids. During the metabolic profiling, we found endogenous carotenoid hydrocarbons, namely lycopene or its structural isomer β-carotene, ionized as radical cations. To our knowledge, this is the first demonstration of ionizing hydrocarbons in the MSI field.

Characterization of synthetic dyes for environmental and forensic assessments: A chromatography and mass spectrometry approach

Dyes have become common substances since they are employed in mostly all objects surrounding our daily activities such as clothing and upholstery. Based on the usage and disposal of these objects, the transfer of the dyes to other media such as soil and water increases their prevalence in our environment. However, this prevalence could help to solve crimes and pollution problems if detection techniques are proper. For that reason, the detection and characterization of dyes in complex matrices is important to determine the possible events leading to their deposition (natural degradation, attempts of removal, possible match with evidence, among others). Currently, there are several chromatographic and mass spectrometric approaches used for the identification of these organic molecules and their derivatives with high specificity and accuracy. This review presents current chromatographic and mass spectrometric methods that are used for the detection and characterization of disperse, acid, basic, and reactive dyes, and their derivatives.

Mass Spectrometry Imaging (MSI) of Fresh Bones using Infrared Matrix-Assisted Laser Desorption Electrospray Ionization (IR-MALDESI)

We report an effective strategy for direct analysis and two-dimensional (2D) matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry imaging (MSI) of mouse bones that underwent no chemical treatments prior to analysis. To unravel the chemistry in bones under near-physiological conditions, we cut a flash-frozen bone in half longitudinally, placed it in a mold facing flat side down, and poured Plaster of Paris on top of and around the bone. After Plaster of Paris had set, the bone with embedding material was removed from the mold, and placed on the IR-MALDESI imaging stage. Plaster of Paris acted as a fixture to keep every spot on the sample surface the same distance away from the laser focus. To demonstrate the feasibility of IR-MALDESI MSI for analyses of unmodified bones, we imaged bones derived from healthy and stroke-affected mice and generated ion heatmaps showing the spatial distribution of putatively annotated features.

Mapping Natural Dyes in Archeological Textiles by Imaging Mass Spectrometry

Organic dyes of animal and plant origin have often been used by our ancestors to create textiles with polychromic ornamental patterns, and dyestuff analyses reveal how ancient cultures used these natural colorants. Mass spectrometry can characterize ancient colorants from these textiles, but its combination with separation techniques such as liquid chromatography requires the destruction of the pattern to extract organic dyes from the fabrics. In this study we applied mass spectrometry imaging (MS imaging) on colorful patterned textiles to show the spatial distribution of indigo-type and anthraquinone-type dyes. We evaluated different sample preparation techniques for matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF)-MS imaging, e.g. the production of imprints in TLC (thin layer chromatography) aluminum sheets and the embedding of the material in Technovit7100 to produce thin sections. Our protocol enabled the detection of indigo-type dyes directly on a historic textile of more than 2,000 years old embedded in Technovit7100. This is the first-time application of MALDI-TOF-MS imaging to map different organic dyestuffs on archeological remains.

Increased throughput and ultra-high mass resolution in DESI FT-ICR MS imaging through new-generation external data acquisition system and advanced data processing approaches

Desorption electrospray ionisation-mass spectrometry imaging (DESI-MSI) is a powerful imaging technique for the analysis of complex surfaces. However, the often highly complex nature of biological samples is particularly challenging for MSI approaches, as options to appropriately address molecular complexity are limited. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) offers superior mass accuracy and mass resolving power, but its moderate throughput inhibits broader application. Here we demonstrate the dramatic gains in mass resolution and/or throughput of DESI-MSI on an FT-ICR MS by developing and implementing a sophisticated data acquisition and data processing pipeline. The presented pipeline integrates, for the first time, parallel ion accumulation and detection, post-processing absorption mode Fourier transform and pixel-by-pixel internal re-calibration. To achieve that, first, we developed and coupled an external high-performance data acquisition system to an FT-ICR MS instrument to record the time-domain signals (transients) in parallel with the instrument’s built-in electronics. The recorded transients were then processed by the in-house developed computationally-efficient data processing and data analysis software. Importantly, the described pipeline is shown to be applicable even to extremely large, up to 1 TB, imaging datasets. Overall, this approach provides improved analytical figures of merits such as: (i) enhanced mass resolution at no cost in experimental time; and (ii) up to 4-fold higher throughput while maintaining a constant mass resolution. Using this approach, we not only demonstrate the record 1 million mass resolution for lipid imaging from brain tissue, but explicitly show such mass resolution is required to resolve the complexity of the lipidome.

Recent advances in ambient mass spectrometry of trace explosives

Ambient mass spectrometry has evolved rapidly over the past decade, yielding a plethora of platforms and demonstrating scientific advancements across a range of fields from biological imaging to rapid quality control. These techniques have enabled real-time detection of target analytes in an open environment with no sample preparation and can be coupled to any mass analyzer with an atmospheric pressure interface; capabilities of clear interest to the defense, customs and border control, transportation security, and forensic science communities. This review aims to showcase and critically discuss advances in ambient mass spectrometry for the trace detection of explosives.

Ambient Characterization of Synthetic Fibers by Laser Ablation Electrospray Ionization Mass Spectrometry

Direct analysis of synthetic fibers under ambient conditions is highly desired to identify the polymer, the finishes applied and irregularities that may compromise its performance and value. In this paper, laser ablation electrospray ionization ion mobility time-of-flight mass spectrometry (LAESI-IMS-TOF-MS) was used for the analysis of synthetic polymers and fibers. The key to this analysis was the absorption of laser light by aliphatic and aromatic nitrogen functionalities in the polymers. Analysis of polyamide (PA) 6, 46, 66, and 12 pellets and PA 6, 66, polyaramid and M5 fibers yielded characteristic fragment ions without any sample pretreatment, enabling their unambiguous identification. Synthetic fibers are, in addition, commonly covered with a surface layer for improved adhesion and processing. The same setup, but operated in a transient infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mode, allowed the detailed characterization of the fiber finish layer and the underlying polymer. Differences in finish layer distribution may cause variations in local properties of synthetic fibers. Here we also show the feasibility of mass spectrometry imaging (MSI) of the distribution of a finish layer on the synthetic fiber and the successful detection of local surface defects.

Infrared matrix-assisted laser desorption electrospray ionization mass spectrometry imaging analysis of biospecimens

Infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry imaging (MSI) is a technique well suited for analysis of biological specimens. This tutorial review focuses on recent advancements and applications of IR-MALDESI MSI to better understand key biological questions. Through optimization of user-defined source parameters, comprehensive and quantitative MSI data can be obtained for a variety of analytes. The effect of an ice matrix layer is well defined in the context of desorption dynamics and resulting ion abundance. Optimized parameters and careful control of conditions affords quantitative MSI data which provides valuable information for targeted, label-free drug distribution studies and untargeted metabolomic datasets. Challenges and limitations of MSI using IR-MALDESI are addressed in the context of the bioimaging field.

Analysis of Antiretrovirals in Single Hair Strands for Evaluation of Drug Adherence with Infrared-Matrix-Assisted Laser Desorption Electrospray Ionization Mass Spectrometry Imaging

Adherence to a drug regimen can be a strong predictor of health outcomes, and validated measures of adherence are necessary at all stages of therapy from drug development to prescription. Many of the existing metrics of drug adherence (e.g., self-report, pill counts, blood monitoring) have limitations, and analysis of hair strands has recently emerged as an objective alternative. Traditional methods of hair analysis based on LC-MS/MS (segmenting strands at ≥1 cm length) are not capable of preserving a temporal record of drug intake at higher resolution than approximately 1 month. Here, we evaluated the detectability of HIV antiretrovirals (ARVs) in hair from a range of drug classes using infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry imaging (MSI) with 100 μm resolution. Infrared laser desorption of hair strands was shown to penetrate into the strand cortex, allowing direct measurement by MSI without analyte extraction. Using optimized desorption conditions, a linear correlation between IR-MALDESI ion abundance and LC-MS/MS response was observed for six common ARVs with estimated limits of detection less than or equal to 1.6 ng/mg hair. The distribution of efavirenz (EFV) was then monitored in a series of hair strands collected from HIV infected, virologically suppressed patients. Because of the role hair melanin plays in accumulation of basic drugs (like most ARVs), an MSI method to quantify the melanin biomarker pyrrole-2,3,5-tricarboxylic acid (PTCA) was evaluated as a means of normalizing drug response between patients to develop broadly applicable adherence criteria.

Influence of C-Trap Ion Accumulation Time on the Detectability of Analytes in IR-MALDESI MSI

Laser desorption followed by post electrospray ionization requires synchronized timing of the key events (sample desorption/ionization, mass spectrometry analysis, and sample translation) necessary to conduct mass spectrometry imaging (MSI) with adequate analyte sensitivity. In infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) MSI analyses, two laser pulses are used for analysis at each volumetric element, or voxel, of a biological sample and ion accumulation in the C-trap exceeding 100 ms is necessary to capture all sample-associated ions using an infrared laser with a 20 Hz repetition rate. When coupled to an Orbitrap-based mass spectrometer like the Q Exactive Plus, this time window for ion accumulation exceeds dynamically controlled trapping of samples with comparable ion flux by Automatic Gain Control (AGC), which cannot be used during MSI analysis. In this work, a next-generation IR-MALDESI source has been designed and constructed that incorporates a mid-infrared OPO laser capable of operating at 100 Hz and allows requisite C-trap inject time during MSI to be reduced to 30 ms. Analyte detectability of the next-generation IR-MALDESI integrated source has been evaluated as a function of laser repetition rate (100-20 Hz) with corresponding C-trap ion accumulation times (30-110 ms) in both untargeted and targeted analysis of biological samples. Reducing the C-trap ion accumulation time resulted in increased ion abundance by up to 3 orders of magnitude for analytes ranging from xenobiotics to endogenous lipids, and facilitated the reduction of voxel-to-voxel variability by more than 3-fold.