Gold-sputtered Blu-ray discs: simple and inexpensive SERS substrates for sensitive detection of melamine

SERS-electrochemical dual-mode detection of microRNA on same interface assisted by exonuclease III signal transformation

Dual-mode sensing has attracted more attentions which provide more accurate and reliable approach of cancer-related biomarkers. Herein, we developed a novel SERS/electrochemical dual-mode biosensor for miRNA 21 detection based on Exo III-assisted signal transformation. Firstly, the Au NPs were deposited on electrode as SERS substrate and Mn3O4/S4(DNA signal strand) was modified on Au NPs/S5 by the DNA strands S5-S4 pairing principle as hydrogen peroxide catalyst, leading to an obviously high DPV electrical signal without Raman signal. Subsequently, the presence of miRNA 21 will activate the Mn3O4/S4 to be decomposed under exonuclease III-assisted process, then the S3' chains modified with Raman molecular Cy3(Cy3-S3') is continuously connected to the Au NPs/S5 by DNA stands S5-S3' pairing principle, leading to the Raman signal response and DPV signal reduction. The biosensor shows good linear calibration curves of both SERS and electrochemical sensing modes with the detection limit of 3.98 × 10-3 nM and 6.89 × 10-5 nM, respectively. This work finds an ingenious mode for dual detection of microRNA on a same interface, which opens a new strategy for SERS and electrochemical analysis.

Application of SERS-based nanobiosensors to metabolite biomarkers of CKD

A clinical diagnosis of chronic kidney disease (CKD) is commonly achieved by estimating the serum levels of urea and creatinine (CR). Given the limitations of the conventional diagnostic assays, it is imperative to seek alternative, economical strategies for the detection of CKD-specific biomarkers with high specificity and selectivity. In this respect, surface-enhanced Raman spectroscopy (SERS) can be regarded as an ideal choice. SERS signals can be greatly amplified by noble metal nanoparticles (e.g., gold nanoparticles (GNPs)) of numerous sizes, shapes, and configurations to help achieve ultra-sensitive single molecule-level detection at 10^-15 M (up to 10 orders of magnitude more sensitive than fluorescence-based detection). The irregular geometry of GNPs with spike-like tips, dimers, and aggregates with small nanogaps (i.e., due to plasmon coupling such as Raman hot spots) play a pivotal role in enhancing the specificity and sensitivity of SERS. This review critically outlines the performance of SERS-based biosensors in the ultrasensitive detection of CKD biomarkers in various body fluids in terms of basic quality assurance parameters (e.g., limit of detection, figure of merit, enhancement factor, and stability of the biosensor). Moreover, the challenges and perspectives are described with respect to the expansion of such sensing techniques in practical clinical settings.

Gold nanoparticle decorated blu-ray digital versatile disc as a highly reproducible surface-enhanced Raman scattering substrate for detection and analysis of rotavirus RNA in laboratory environment

Detection and estimation of various biomolecular samples are often required in research and clinical laboratory applications. Present work demonstrates the functioning of a surface-enhanced Raman scattering (SERS) substrate that has been obtained by drop-casting of citrate-reduced gold nanoparticles (AuNPs) of average dimension of 23 nm on a bare blu-ray digital versatile disc (BR-DVD) substrate. The performance of the proposed SERS substrate has been initially evaluated with standard Raman active samples, namely malachite green (MG) and 1,2-bis(4-pyridyl)ethylene (BPE). The designed SERS substrate yields an average enhancement factor of 3.2 × 10⁶ while maintaining reproducibility characteristics as good as 94% over the sensing region of the substrate. The usability of the designed SERS substrate has been demonstrated through the detection and analysis of purified rotavirus double-stranded RNA (dsRNA) samples in the laboratory environment condition. Rotavirus RNA concentrations as low as 10 ng/μL could be detected with the proposed sensing scheme.

Bimetallic Au-Ag on a Patterned Substrate Derived from Discarded Blu-ray Discs: Simple, Inexpensive, Stable, and Reproducible Surface-Enhanced Raman Scattering Substrates

A simple and reproducible surface enhanced Raman scattering (SERS) substrate of bimetallic gold-silver (Au-Ag) based on discarded a Blu-ray disc read only memory (BD-ROM) was developed by simply incorporating electrochemical (EC) treatment and chemical reaction. The resurfaced AgBD-ROM substrate (r-AgBD-ROM) was fabricated by EC treatment on a Ag film layer in BD-ROM (AgBD-ROM) to generate silver nanoparticles (AgNPs) on the indented pattern surface. Then, galvanic displacement reaction of Au and Ag was carried out to prepare the bimetallic Au-Ag structure (Au-r-AgBD-ROM). The suitable size and density as well as location of NPs on the surface can be tuned via EC treatment conditions to obtain highly active SERS performance. The SERS enhancement phenomenon on our developed substrate was studied by observing the location of the SERS hot spot obtained by Raman mapping. The developed SERS substrate offers excellent stability (90 days), good uniformity [6.14% relative standard deviation (RSD)], and reproducibility (3.79% of RSD). Moreover, this substrate can be used as a promising sensor for detecting acetaminophen, ibuprofen, and mefenamic acid. This finding suggests a simple and low-priced process, which potentially facilitates fabrication of highly sensitive SERS substrates for practical applications.

Urchin-like ZnO-nanorod arrays templated growth of ordered hierarchical Ag/ZnO hybrid arrays for surface-enhanced Raman scattering

Here, a universal strategy for the controllable synthesis of three dimensional (3D) hierarchical Ag/ZnO hybrid arrays based on the urchin-like ZnO-nanorod array template is presented. The urchin-like ZnO-nanorod arrays are first achieved by electrodepositing a high density of ZnO-nanorods onto the surface of highly hexagonally arranged arrays of polystyrene (PS) microspheres, and then Ag-nanoparticles (Ag-NPs) are assembled onto the surface of each ZnO-nanorod via photochemical reaction, ion sputtering, galvanic cell reaction deposition and electrochemical deposition, forming the ordered hierarchical Ag/ZnO hybrid arrays. The urchin-like Ag/ZnO hybrid arrays with well-ordered hierarchical morphology and high density 'hot spots' located in the sub-10 nm gaps between neighboring Ag-NPs on both the same ZnO-nanorod and neighboring ZnO-nanorods can be directly utilized as hybrid surface-enhanced Raman scattering (SERS) substrates with high SERS activity. This work provides a strategy for the rational assembly of well-ordered hierarchical noble metal/semiconductor hybrid arrays, which may open up many opportunities in areas such as catalysis, SERS, and biosensing.

Fabrication and SERS performance of silver nanoarrays by inkjet printing silver nanoparticles ink on the gratings of compact disc recordable

Silver nanoarrays were fabricated by inkjet printing silver nanoparticles ink on the gratings of compact disc recordable (CD-R). Rhodamine 6G (R6G) was chosen as a probe molecule to evaluate their surface-enhanced Raman scattering (SERS) performance. The finite-difference time domain (FDTD) solution was used to simulate local electric field distribution of silver nanoparticles on the grating surface and flat surface, respectively. It was found that the Ag/grating substrate possessed higher enhancement ability than the Ag/flat due to the high-density hot spots of periodic structure of the grating. The silver nanoarrays substrate exhibited high stability and the characteristic peaks of R6G can be still well observed after eight months. The substrate also exhibited a good spot-to-spot reproducibility with an RSD of 10.21% by eight points. SERS mappings of R6G adsorbed on silver nanoarrays were tested under the ultra-fast Raman imaging mode, and the relative standard deviation (RSD) values of uniformity were calculated to be 8.35% and 11.53% at 610 cm^-1 band measured by 2500 and 6480 points, respectively. In addition, the as-prepared silver nanoarrays was successfully applied to the detection of melamine in adult milk powder solution directly. A good linear relationship with the correlation coefficient of 0.9968 between peak intensity and concentration was obtained from 1.2 to 100 mg/L.

A microfluidic device enabling surface-enhanced Raman spectroscopy at chip-integrated multifunctional nanoporous membranes

A three-dimensional microfluidic chip that combines sample manipulation and SERS detection on-chip was developed. This was successfully achieved by chip integration of a nanoporous polycarbonate track-etched (PCTE) membrane which connects microfluidic channels on two different levels with each other. The membrane fulfills two functions at the same time. On the one hand, it enables sample enrichment by selective electrokinetic transport processes through the membrane. On the other hand, the silver nanoparticle-coated backside of the same membrane enables SERS detection of the enriched analytes. The SERS substrate performance and the electrokinetic transport phenomena were studied using Rhodamine B (RhB) by Raman microscopy and fluorescence video microscopy. After system validation, the approach was attested by on-chip processing of a complex food sample. In a proof-of-concept study, the microfluidic device with the SERS substrate membrane was used to detect a concentration of 1 ppm melamine (705 cm^-1) in whole milk. Electrokinetic transport across the nanoporous SERS substrate facilitates the extraction of analyte molecules from a sample channel into a detection channel via a potential gradient, thus easily removing obscuring compounds present in the sample matrix. The SERS signal of the analyte could be significantly increased by on-target sample drying. This was achieved by guiding an additional gas flow over the membrane which further extends the microfluidic functionality of the chip device. The proposed method possesses the advantages of combining a rapid (within 15 min) sample clean-up using electrokinetic transport in a three-dimensional microfluidic device which is highly suitable for sensitive and selective SERS detection of chemical and biological analytes. Graphical Abstract.

Review on Nanomaterial-Based Melamine Detection

Illegal adulteration of milk products by melamine and its analogs has become a threat to the world. In 2008, the misuse of melamine with infant formula caused serious effects on babies of China. Thereafter, the government of China and the US Food and Drug Administration (FDA) limited the use of melamine of 1 mg/kg for infant formula and 2.5 mg/kg for other dairy products. Similarly, the World Health Organization (WHO) has also limited the daily intake of melamine of 0.2 mg/kg body weight per day. Many sensory schemes have been proposed by the scientists for carrying out screening on melamine poisoning. Among them, nanomaterial-based sensing techniques are very promising in terms of real-time applicability. These materials uncover and quantify the melamine by means of diverse mechanisms, such as fluorescence resonance energy transfer (FRET), aggregation, inner filter effect, surface-enhanced Raman scattering (SERS), and self-assembly, etc. Nanomaterials used for the melamine determination include carbon dots, quantum dots, nanocomposites, nanocrystals, nanoclusters, nanoparticles, nanorods, nanowires, and nanotubes. In this review, we summarize and comment on the melamine sensing abilities of these nanomaterials for their suitability and future research directions.

Linking capacity loss and retention of nickel hexacyanoferrate to a two-site intercalation mechanism for aqueous Mg2+ and Ca2+ ions

Partial substitution of Ni²⁺ in the host lattice of nickel hexacyanoferrate by Mg²⁺ or Ca²⁺ from aqueous electrolytes leads to rapid capacity fade during galvanostatic cycling, while capacity is retained by intercalation into interstitial sites.

Diboron Porphyrins: The Raman Signature of the In-Plane Tetragonal Elongation of the Macrocycle

We describe an unusual in-plane type of porphyrin core distortion, tetragonal elongation (TE), observed experimentally in diboron porphyrins. The vibrational spectra of several of these complexes exhibit shifts that we have assigned to this TE distortion by comparing experimental spectra with DFT computational findings. The influence of TE in porphyrin systems was isolated using DFT analysis of the well-known model compounds Ni(II)porphine and Zn(II)porphine, with the macrocycle ring constrained to eliminate the influence of out-of-plane (OOP) distortions. A significant down-shift in frequencies was observed for porphyrin normal vibrational modes, particularly the in-plane A_1g/B_1g modes that are dominated by contributions from stretching and bending of C_α-C_m coordinates. In contrast, TE had little effect on the v(Pyr_halfring) and δ(Pyr_def) modes, though the lowered symmetry of the system resulted in significant splitting of the B_2u and B_3u modes. The impact of the TE distortion upon the diboron porphyrin vibrational spectrum was probed experimentally using Raman spectroscopy of B₂O₂(BCl₃)₂(TTP), B₂OF₂(TTP), and B₂OPhOH₂(TTP) (TTP = 5,10,15,20-(tetra- p-tolyl)porphyrin). Comparing the experimentally obtained spectral signatures to the computational findings allowed us to assign the large shifts observed for the v₂ and v₃ modes to the TE distortion in diboron porphyrins.