Recent development of electrochemiluminescence sensors for food analysis

Development of a time-resolved immunochromatographic test strip for rapid and quantitative determination of GFAP in serum

Glial fibrillary acidic protein (GFAP) in serum has been shown as a biomarker of traumatic brain injury (TBI) which is a significant global public health concern. Accurate and rapid detection of serum GFAP is critical for TBI diagnosis. In this study, a time-resolved fluorescence immunochromatographic test strip (TRFIS) was proposed for the quantitative detection of serum GFAP. This TRFIS possessed excellent linearity ranging from 0.05 to 2.5 ng/mL for the detection of serum GFAP and displayed good linearity (Y = 598723X + 797198, R2 = 0.99), with the lowest detection limit of 16 pg/mL. This TRFIS allowed for quantitative detection of serum GFAP within 15 min and showed high specificity. The intra-batch coefficient of variation (CV) and the inter-batch CV were both < 4.0%. Additionally, this TRFIS was applied to detect GFAP in the serum samples from healthy donors and patients with cerebral hemorrhage, and the results of TRFIS could efficiently discern the patients with cerebral hemorrhage from the healthy donors. Our developed TRFIS has the characteristics of high sensitivity, high accuracy, and a wide linear range and is suitable for rapid and quantitative determination of serum GFAP on-site.

An automatic and smart platform for rapid detection of cadmium and lead simultaneously in rice using triple-amplified chemiluminescence immunoassay

Rapid detection of trace ions is urgently needed for large-scale screening to ensure food safety. This study developed an innovative and automatic strategy, based on a smart-designed platform for rapid detection of cadmium and lead in rice. As bridge antibody, the antigen was conjugated with goat anti-mouse immunoglobulin G labeled alkaline phosphatase. Meanwhile, a biotin-streptavidin system was introduced to micromagnetic particles, thus providing a triple-amplified chemiluminescence immunoassay with high sensitivity, accuracy and specificity. The limits of detection for cadmium and lead were 0.06 and 1.00 ng mL-1, respectively, within 30 min. The recoveries ranged from 89.81 to 114.92 %, with relative standard deviations less than 9.2 %. The results obtained agreed with those of inductively coupled plasma-mass spectrometry and certified reference materials. Additionally, the auto-operation avoided human errors as well as being convenient, fast, automatic and high-throughput. Therefore, this smart platform can be applied for large-scale Cd2+ and Pb2+ screening.

Aggregation-induced enhancement of pyrene-based metal-organic framework as a new electrochemiluminescence emitter for ultrasensitive detection of sulfadimethoxine

In this study, a signal-on electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of sulfadimethoxine (SDM) was constructed based on a competitive aptamer strategy. Specifically, cerium-metal-organic framework (Ce-MOF) with large specific surface area and excellent electrical conductivity was combined with gold nanoparticles (AuNPs) to form a substrate, followed by the immobilisation of double-stranded DNA (dsDNA) via AuN bonds. In the presence of SDM, the aptamer tended to form an aptamer-SDM complex, which caused dsDNA to dissociate. After release of the aptamer, the capture probe (CP) combined with the tracer label to enhance the ECL signal. As expected, the prepared sensor displayed an ideal linear response range from 10.0 fg mL-1 to 100 ng mL-1 with a limit of detection (LOD) of 1.28 fg mL-1 and successfully detected SDM in milk and quality control samples.

Dual-potential electrochemiluminescence cytosensor based on a metal-organic framework and ABEI-PEI-Au@AgNPs for the simultaneous determination of phosphatidylserine and epidermal growth factor receptors on an apoptotic cell surface

A new electrochemiluminescence (ECL) cytosensor is proposed for the simultaneous determination of phosphatidylserine (PS) and epidermal growth factor receptor (EGFR) based on the ECL signals of metal-organic framework-5 (MOF-5) loaded CdS quantum dots and N-(aminobutyl)-N-(ethylisoluminol)-polyethylenimine capped Au and Ag nanoparticles. Apoptosis promotes the exposure of PS and reduces the expression of EGFR in cell membranes. Two spatially resolved areas on dual-disk glassy carbon electrodes were designed to eliminate the interference from different ECL probes. Using HepG2 cells treated with resveratrol to induce apoptosis, the cytosensor exhibited high sensitivity, simplicity, and high reproducibility, demonstrating its potential in drug screening and rapid apoptotic cell detection. The strategy reported provides a promising platform for the highly sensitive cytosensing and convenient screening of clinically relevant anticancer drugs.

Glyphosate Separating and Sensing for Precision Agriculture and Environmental Protection in the Era of Smart Materials

The present article critically and comprehensively reviews the most recent reports on smart sensors for determining glyphosate (GLP), an active agent of GLP-based herbicides (GBHs) traditionally used in agriculture over the past decades. Commercialized in 1974, GBHs have now reached 350 million hectares of crops in over 140 countries with an annual turnover of 11 billion USD worldwide. However, rolling exploitation of GLP and GBHs in the last decades has led to environmental pollution, animal intoxication, bacterial resistance, and sustained occupational exposure of the herbicide of farm and companies' workers. Intoxication with these herbicides dysregulates the microbiome-gut-brain axis, cholinergic neurotransmission, and endocrine system, causing paralytic ileus, hyperkalemia, oliguria, pulmonary edema, and cardiogenic shock. Precision agriculture, i.e., an (information technology)-enhanced approach to crop management, including a site-specific determination of agrochemicals, derives from the benefits of smart materials (SMs), data science, and nanosensors. Those typically feature fluorescent molecularly imprinted polymers or immunochemical aptamer artificial receptors integrated with electrochemical transducers. Fabricated as portable or wearable lab-on-chips, smartphones, and soft robotics and connected with SM-based devices that provide machine learning algorithms and online databases, they integrate, process, analyze, and interpret massive amounts of spatiotemporal data in a user-friendly and decision-making manner. Exploited for the ultrasensitive determination of toxins, including GLP, they will become practical tools in farmlands and point-of-care testing. Expectedly, smart sensors can be used for personalized diagnostics, real-time water, food, soil, and air quality monitoring, site-specific herbicide management, and crop control.

Dual-binding domain electrochemiluminescence biosensing platform with self-checking function for sensitive detection of synthetic cathinone in e-cigarettes

Current single signal electrochemiluminescence (ECL) sensors are susceptible to false positive or false negative phenomena due to experimental conditions. Therefore, sensors with "self-checking" function are attracting democratic attention. In quick succession, a highly sensitive single-cathode dual ECL signal aptasensor with self-checking function to improve the shortcomings mentioned above was designed. This aptasensor used In-based metal-organic framework (MIL-68) as load and stabilizer to effectively attenuate the aggregation-induced quenching (ACQ) effect of porphyrin derivatives (Sn-TCPP) while improve ECL stability. The introduction of cooperative-binding split-aptamers" (CBSAs) aptamers increased the specificity of the aptasensor and its unique double-binding domains detection accelerated the detection efficiency. When analyzing 3,4-methylenedioxypyrovalerone (MDPV), we could calculate two concentrations based on the strength of ECL 1 and ECL 2. If the concentrations are the same, the result would be obtained; if not, it should be retested. Depending on the above operation, the results achieve self-check. It was found that the designed aptasensor could quantify the concentration of MDPV between 1.0 × 10^-12 g/L and 1.0 × 10^-6 g/L with the limit of detection (LOD) of 1.4 × 10^-13 g/L and 2.0 × 10^-13 g/L, respectively (3 σ/slope). This study not only improves the detection technology of MDPV, but also explores the dual-signal detection of porphyrin for the first time and enriches the definition of self-checking sensor.

Highly Electrochemiluminescent Cs4PbBr6@CsPbBr3 Perovskite Nanoacanthospheres and Their Application for Sensing Bisphenol A

Perovskite quantum dots (PQDs) as recently emerging electrochemiluminescence (ECL) luminophores have been paid much attention due to their good ECL activity, narrow ECL spectra, and easy preparation. However, the PQDs used for ECL sensing were mainly inherited from those PQDs prepared as strong fluorescence (FL) luminophores, which would limit the finding of highly ECL PQDs for sensing due to the very different mechanisms in generating excited-state luminophores between ECL and FL. In order to obtain highly electrochemiluminescent PQDs, for the first time we proposed to synthesize PQDs for ECL sensing rather than for FL-based analysis by optimizing the synthesis conditions. It was revealed that the volume of the precursor solution, the concentrations of CsBr and PbBr₂, the amount of capping reagents, and the synthesis reaction temperature all significantly affect the ECL activity of PQDs. On the basis of the optimization of the synthesis conditions, we obtained a new type of PQDs with high ECL activity. The new PQDs were characterized by several technologies, such as scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive X-ray spectrum, to be the hybrids of 3D PQDs (CsPbBr₃) and 0D PQDs (Cs₄PbBr₆) with unique morphologies, i.e., Cs₄PbBr₆@CsPbBr₃ PQD nanoacanthospheres (PNAs), in which Cs₄PbBr₆ was as the core and CsPbBr₃ served as the shell. The obtained Cs₄PbBr₆@CsPbBr₃ PNAs had much higher (>4 times) ECL activity than the prevailing 3D (CsPbBr₃) PQDs. Finally, the novel Cs₄PbBr₆@CsPbBr₃ PNAs have been applied for the ECL sensing of bisphenol A (BPA), showing a promising application of the highly electrochemiluminescent PQDs in analytical chemistry.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

Water-soluble dinuclear iridium(III) and ruthenium(II) bis-terdentate complexes: photophysics and electrochemiluminescence

The synthesis, photophysics, and electrochemiluminescence (ECL) of four water-soluble dinuclear Ir(III) and Ru(II) complexes (1-4) terminally-capped by 4'-phenyl-2,2':6',2''-terpyridine (tpy) or 1,3-di(pyrid-2-yl)-4,6-dimethylbenzene (N^C^N) ligands and linked by a 2,7-bis(2,2':6',2''-terpyridyl)fluorene with oligoether chains on C9 are reported. The impact of the tpy or N^C^N ligands and metal centers on the photophysical properties of 1-4 was assessed by spectroscopic methods including UV-vis absorption, emission, and transient absorption, and by time-dependent density functional theory (TDDFT) calculations. These complexes exhibited distinct singlet and triplet excited-state properties upon variation of the terminal-capping terdentate ligands and the metal centers. The ECL properties of complexes 1-3 with better water solubility were investigated in neutral phosphate buffer solutions (PBS) by adding tripropylamine (TPA) as a co-reactant, and the observed ECL intensity followed the descending order of 3 > 1 > 2. Complex 3 bearing the [Ru(tpy)₂]²⁺ units displayed more pronounced ECL signals, giving its analogues great potential for further ECL study.

The combination of highly efficient resonance energy transfer in one nanocomposite and ferrocene-quenching for ultrasensitive electrochemiluminescence bioanalysis

Sensitive and accurate detection of prostate-specific antigen (PSA) is of great significance since it is regarded as a biomarker for prostate diseases. Herein, a facile strategy for the design of highly efficient electrochemiluminescence (ECL) sensor was proposed for PSA assay. Carboxylated graphitic carbon nitride (g-C₃N₄) nanosheet (CCN) and tris (2, 2'-Bipyridyl) ruthenium (II) (Ru(bpy)₃²⁺) encapsulated in silica nanospheres (RuSi NPs) were employed as the donor and acceptor, respectively. CCN and RuSi NPs were covalently bound within one nanocomposite (CCN@RuSi) through the amide bond, which greatly shortened the electron-transfer path. Thus, the resonance energy transfer (RET) efficiency was remarkably increased, providing a high initial ECL intensity for the ECL assay. After the successive introducing of aptamer, PSA, and ferroceneboronic acid (FcBA) on the surface of CCN@RuSi modified electrode, the ECL signal remarkably decreased, which was caused by the steric hindrance of PSA and electron transfer quenching between Fc⁺ and excited-state Ru(bpy)₃²⁺*. Therefore, a highly efficient ECL platform was constructed, which achieved the ultrasensitive detection of PSA with a linear range and a limit of detection of 100 fg/mL - 50 ng/mL and 1.2 fg/mL, respectively. Furthermore, the dual-affinity of the aptamer and FcBA to PSA endowed the sensor with a high selectivity for the determination of PSA in human serum samples. The present work provides an important reference for the integration of RET and quenching strategy in the ECL study with rapid, ultrasensitive, and highly selective detection performances.

Au-doped MOFs catalyzed electrochemiluminescence platform coupled with target-induced self-enrichment for detection of synthetic cannabinoid RCS-4

A ternary composite material with Au, Co-based organic frameworks (ZIF-67) and perylene derivatives (PTCD-cys) has been synthesized for identification of synthetic cannabinoids. Through contact with Au-S, Au-ZIF-67 increased electrochemiluminescence (ECL) sensitivity and stability and efficiently catalyzed the ECL of PTCD-cys. Compared with the ECL response of PTCD-cys monomer, the ECL signal value of the composite material was significantly increased, and the onset potential of Au-ZIF-67/PTCD-cys favorably shifted more than that of PTCD-cys/GCE. When the target cannabinoid molecule RCS-4 appeared, Au-ZIF-67 captured and immobilized it on the sensor surface by adsorption to achieve target-induced self-enrichment of RCS-4. Under optimal conditions, the ECL sensor was found to be linearly related to the logarithm of the RCS-4 concentration ranging from 3.1 × 10^-15 to 3.1 × 10^-9 mol/L with a detection limit (LOD) of 6.0 × 10^-16 mol/L (S/N = 3). The approach had the advantages of being simple to use, having a high sensitivity, a wide detection range, and good stability, making it a novel platform for RSC-4 detection in public health safety monitoring.

Self-luminescent europium based metal organic frameworks nanorods as a novel electrochemiluminescence chromophore for sensitive ulinastatin detection in biological samples

In this work, we developed a novel electrochemiluminescence (ECL) biosensor for ulinastatin (UTI) detection based on self-luminescent metal-organic framework (L-MOF) nanomaterials. The L-MOFs could be simply prepared by one-pot methods using Eu³⁺ and 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid (H₃TATAB) as the metallic center and organic ligand, respectively. The Eu-TATAB exhibited high efficiency and stable ECL performance when using K₂S₂O₈ as coreactant. For the established biosensor, Eu-TATAB was both used as the ECL chromophore and protein carrier due to its outstanding biocompatibility and large superficial area, which could load sufficient antibodies to link with antigen in the biosensor for subsequent detection. The established sandwich ECL biosensor showed a wide linear range of 0.1 ng mL^-1 - 10⁵ ng mL^-1 and a low limit of detection of 9.7 pg mL^-1 for UTI detection. In addition, the developed ECL biosensor could also be successfully applied to the real UTI sample determination in serum. The reported biosensor strategy could provide a guide for developing more other novel and promising high-performance ECL nanomaterials, and also be used as a potential method for ultrasensitive UTI detection in disease research.

Highly sensitive competitive electrochemiluminescence immunosensor based on ABEI-H2O2 system with cobalt hydroxide nanosheets and bimetal PdAg as co-enhancer for detection of florfenicol

A competitive electrochemiluminescence immunoassay was established based on the isoluminol-H₂O₂ (ABEI-H₂O₂) system catalyzed by cobalt hydroxide (Co(OH)₂) to detect florfenicol residues in food. First , ultra-thin two-dimensional Co(OH)₂ nanosheets were used as the catalyst of ABEI-H₂O₂ system, and excellent catalytic effects were acquired by catalytic decomposition of hydrogen peroxide with cobalt ions. Then, bimetal PdAg (Pd/Ag) alloy nanoparticles were used as a bridge to connect ABEI and antibody due to their good biocompatibility; Pd/Ag alloy nanoparticles also had a catalytic effect to further amplify the ECL signal in the system due to the synergistic catalytic effect of the bimetal. A competitive immunoassay strategy was used to detect florfenicol, where the florfenicol in the sample will compete with the antibody for the limited binding sites on the coating antigen. The ECL immunosensor for florfenicol detection shows high sensitivity, with a linear range from 10^-4  to 10² ng mL^-1, and a detection limit of 3.1 × 10^-5 ng mL^-1, where the scan potential was varied from 0 to 0.6 V vs Ag/AgCl . This work was the first to use Co(OH)₂ nanosheets and bimetal PdAg catalytic signal amplification methods to design the sensor, which provides a novel, convenient and reliable strategy for ultra-sensitive detection of florfenicol, and other biological small molecules. A novel ECL immunosensor based on ABEI-H₂O₂₂.

Recent advances and perspectives of enzyme-based optical biosensing for organophosphorus pesticides detection

The overuse or abuse of organophosphorus pesticides (OPs) can bring about severe contamination problems in foodstuff and the environment, which will seriously threaten human health and the ecosystem's cycle. Hence, it is in high demand to establish sensitive, portable, specific, and cost-effective methods for monitoring OPs to control food safety, protect the ecosystem, and prevent disease. The optical biosensor with enzyme as bio-recognition elements has been an effective alternative for OPs detection. Herein, we firstly introduce various enzymes, sensing mechanisms, advantages and disadvantages used as bio-recognition elements in optical sensing for OPs detection. Then, we review various optical biosensing strategies based on enzymes as recognition elements that were ingeniously designed and successfully utilized for OPs detection, with a particular emphasis on photoluminescence (PL), chemiluminescence (CL), electrochemiluminescence (ECL), and colorimetric (CM) biosensing strategies. We not only highlight the state-of-art developments and the construction strategies of the enzyme-based optical biosensing method but also summarize the existing deficiencies, current challenges, and the future perspectives of OPs detection.

Paper-based electrochemiluminescence device for the rapid estimation of trimethylamine in fish via the quenching effect of thioglycolic acid-capped cadmium selenide quantum dots

A paper-based electrochemiluminescence device (µPAD-ECL) for the estimation of trimethylamine (TMA) concentration in fish was developed using tris(2,2'-bipyridyl)ruthenium(II) complex coupled with water soluble thioglycolic acid-capped CdSe quantum dots on the inkjet-printed paper-based device. The quenching effect of tertiary amines on the ECL intensity was found to be sensitive and concentration dependent. This effect allows the measurement of TMA at low concentrations. Under the optimal conditions, the linear concentration range was exhibited from 1 × 10^-12 to 1 × 10^-7 M and a detection limit of 2.09 × 10^-13 M, with relative standard deviation of 1.97 %. The applicability of µPAD-ECL is demonstrated by the rapid estimation of trimethylamine concentration in fish tissue, and could be used as a method for screening the total amount of tertiary amines in fishery products in remote communities. The results obtained using the paper-based devices agreed well with those obtained applying high performance liquid chromatography with benzoyl derivatization, at a confidence level of 95%.

Aggregation-Induced Emission in Electrochemiluminescence: Advances and Perspectives

The discovery of aggregation-induced electrochemiluminescence (AIECL) in 2017 opened new research paths in the quest for novel, more efficient emitters and platforms for biological and environmental sensing applications. The great abundance of fluorophores presenting aggregation-induced emission in aqueous media renders AIECL a potentially powerful tool for future diagnostics. In the short time following this discovery, many scientists have found the phenomenon interesting, with research findings contributing to advances in the comprehension of the processes involved and in attempts to design new sensing platforms. Herein, we explore these advances and reflect on the future directions to take for the development of sensing devices based on AIECL.

Inorganic Recognizer-Assisted Homogeneous Electrochemiluminescence Determination of Organophosphorus Pesticides via Target-Controlled Emitter Release

Given the relevance of organophosphorus pesticides (OPs) with food safety, it is highly urgent to develop sensitive and reliable sensors for OPs. However, most of the OP sensors are developed based on colorimetric and fluorescent techniques, which are limited to severe interference of color and fluorescence from pigments and organic acids in agricultural crops. Herein, we develop an inorganic recognizer-based homogeneous electrochemiluminescence (ECL) sensor for the highly sensitive and credible determination of OPs based on manganese dioxide and tris(2,2'-bipyridine)ruthenium [Ru(bpy)₃]²⁺. Through electrostatic interaction, manganese dioxide nanoflakes-[Ru(bpy)₃]²⁺ nanocomposites (MnNFs-Ru) are formed and exhibit a weak ECL signal due to the confinement of [Ru(bpy)₃]²⁺ in MnNFs-Ru. Interestingly, MnNFs-Ru are capable of recognizing thiols due to the analyte-initiated reduction of MnNFs into Mn²⁺ and release of [Ru(bpy)₃]²⁺ from MnNFs-Ru into solution. Further, MnNFs-Ru are employed for the homogeneous ECL determination of OPs, where acetylcholinesterase (AChE) catalyzes the hydrolysis of acetylthiocholine (ATCh) into thiocholine, which in turn decomposes MnNFs of MnNFs-Ru into Mn²⁺, and OPs inhibit AChE activity. This study widens the application of inorganic recognizers from colorimetry/fluorescence to homogeneous ECL and effectively avoids the interference of color and fluorescence, opening up a new path to the development of high-performance OP sensors and supplying a promising tool for guaranteed OP-related food safety.

Magnetic nanomaterials based electrochemical (bio)sensors for food analysis

It is widely accepted that nanotechnology attracted more interest because of various values that nanomaterial applications offers in different fields. Recently, researchers have proposed nanomaterials based electrochemical sensors and biosensors as one of the potent alternatives or supplementary analytical tools to the conventional detection procedures that consumes a lot of time. Among different nanomaterials, researchers largely considered magnetic nanomaterials (MNMs) for developing and fabricating the electrochemical (bio)sensors for numerous utilizations. Among several factors, healthier and higher quality foods are the most important preferences of consumers and manufacturers. For this reason, developing new techniques for rapid, precise as well as sensitive determination of components or contaminants of foods is very important. Therefore, developing the new electrochemical (bio)sensors in food analysis is one of the key and effervescent research fields. In this review, firstly, we presented the properties and synthesis strategies of MNMs. Then, we summarized some of the recently developed MNMs-based electrochemical (bio)sensors for food analysis including detecting the antioxidants, synthetic food colorants, pesticides, heavy metal ions, antibiotics and other analytes (bisphenol A, nitrite and aflatoxins) from 2010 to 2020. Finally, the present review described advantages, challenges as well as future directions in this field.

Visible light-driven photoelectrochemical ampicillin aptasensor based on an artificial Z-scheme constructed from Ru(bpy)32+-sensitized BiOI microspheres

Dye sensitization is an alternative strategy to improve photoelectric activity of semiconductors and, particularly, to enhance the activity towards visible light domain. Herein, an artificial Z-scheme bipyridine ruthenium (Ru(bpy)32+) sensitizing narrow-gap bismuth oxy-iodide (BiOI) microspheres was constructed by a simple electrostatic interaction strategy for the first time. The electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) analysis showed that this design of such Z-scheme structure was helpful to enhance the interfacial charge transfer and improve the photoelectric conversion efficiency. In addition, due to the sensitization of Ru(bpy)32+, the band gap was narrowed from 1.8 eV of BiOI microspheres to 1.3 eV of BiOI/Ru(bpy)32+ microspheres, leading to improve the utilization of visible light. So that, the photocurrent of the resulted BiOI/Ru(bpy)32+ was 13.0 times that of pure BiOI microspheres. In view of the outstanding photoelectrochemical (PEC) performance of BiOI/Ru(bpy)32+ and the high specificity of the aptamer, the PEC aptasensor for ampicillin (AMP) merits the excellent detection performance including a broad linear ranging from 1 × 10-7 nM to 100 nM as well as a low detection limit of 3.3 × 10-8 nM (S/N = 3). This work not only provides a novel way to construct and design highly efficient photoactive materials for PEC detection, but also broadens the application of Z-scheme in the field of sensing.

Critical assessment of relevant methods in the field of biosensors with direct optical detection based on fibers and waveguides using plasmonic, resonance, and interference effects

Direct optical detection has proven to be a highly interesting tool in biomolecular interaction analysis to be used in drug discovery, ligand/receptor interactions, environmental analysis, clinical diagnostics, screening of large data volumes in immunology, cancer therapy, or personalized medicine. In this review, the fundamental optical principles and applications are reviewed. Devices are based on concepts such as refractometry, evanescent field, waveguides modes, reflectometry, resonance and/or interference. They are realized in ring resonators; prism couplers; surface plasmon resonance; resonant mirror; Bragg grating; grating couplers; photonic crystals, Mach-Zehnder, Young, Hartman interferometers; backscattering; ellipsometry; or reflectance interferometry. The physical theories of various optical principles have already been reviewed in detail elsewhere and are therefore only cited. This review provides an overall survey on the application of these methods in direct optical biosensing. The "historical" development of the main principles is given to understand the various, and sometimes only slightly modified variations published as "new" methods or the use of a new acronym and commercialization by different companies. Improvement of optics is only one way to increase the quality of biosensors. Additional essential aspects are the surface modification of transducers, immobilization strategies, selection of recognition elements, the influence of non-specific interaction, selectivity, and sensitivity. Furthermore, papers use for reporting minimal amounts of detectable analyte terms such as value of mass, moles, grams, or mol/L which are difficult to compare. Both these essential aspects (i.e., biochemistry and the presentation of LOD values) can be discussed only in brief (but references are provided) in order to prevent the paper from becoming too long. The review will concentrate on a comparison of the optical methods, their application, and the resulting bioanalytical quality.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

Single-Molecule MicroRNA Electrochemiluminescence Detection Using Cyclometalated Dinuclear Ir(III) Complex with Synergistic Effect

The realization of electrochemiluminescence (ECL) detection at the single-molecule level is a longstanding goal of ECL assay that requires a novel ECL probe with significantly enhanced luminescence. Here, the synergistic effect of electrochemiluminescence (ECL) is observed unprecedentedly in a new cyclometalated dinuclear Ir(III) complex [Ir₂(dfppy)₄(imiphenH)]PF₆ (1·PF₆, PF₆^- = hexafluorophosphate) in which two {Ir(dfppy)₂}⁺ units are bridged by an imiphenH^- ligand. The ECL intensity from complex 1·PF₆ is 4.4 and 28.7 times as high as that of its reference mononuclear complexes 2 and 3·PF₆, respectively. Theoretical calculation reveals that the S₀ to S₁ excitation is a local excitation in 1·PF₆ with two electron-coupled Ir(III) centers, which contributes to the enhanced ECL. The synergistic effect of ECL in 1·PF₆ can be used to detect microRNA 21 at the single-molecule level (microRNA 21: UAGCUUAUCAGACUGAUGUUGA), with detectable ECL emission from this complex intercalated in DNA/microRNA 21 duplex as low as 90 helix molecules. The finding of the synergistic effect of ECL will not only provide a novel strategy for the modulation of ECL intensity but also enable the detection of microRNA at the single-molecule level.

Gold Nanoparticle Size-Dependent Enhanced Chemiluminescence for Ultra-Sensitive Haptoglobin Biomarker Detection

Bovine mastitis (BM) is a frequent disease in the dairy industry that causes staggering economical losses due to decreased milk production and increased health care costs. Traditionally, BM detection depends on the efficacy and reliability of analytical techniques that measure somatic cell counts (SCC), detect pathogens, and reveal inflammatory status. Herein, we demonstrate the detection of bovine haptoglobin, a well-documented acute phase protein for evaluating BM clinical status, by utilizing hemoglobin-binding capacity within luminol chemiluminescence (CL) system. The resulting haptoglobin–hemoglobin complex reduces the CL signal proportionally to inherent haptoglobin concentrations. Different sizes of cross-linked gold nanoparticles (GNPs) were examined for enhanced CL (eCL) signal amplification, presenting over 30-fold emitted radiation enhancement for optimized size within real milk samples with respect to nanoparticle-free assay. The eCL values were proportionally related to nanoparticle size and content, influenced by SCC and pathogen type (e.g., Escherichia coli and coagulase-negative staphylococci). The optimized bioassay showed a broad linear response (1 pg mL⁻¹–10 µg mL⁻¹) and minute detection limit of 0.19 pg mL⁻¹, while presenting quantitative performance in agreement with commercial ELISA kit. Finally, the resulting optimized eCL concept offers an efficient label-free detection of haptoglobin biomarker, offering means to diagnose the severity of the associated diseases.

Recent Advances in Electrochemiluminescence Sensors for Pathogenic Bacteria Detection

Pathogenic bacterial contamination greatly threats human health and safety. Rapidly biosensing pathogens in the early stage of infection would be helpful to choose the correct drug treatment, prevent transmission of pathogens, as well as decrease mortality and economic losses. Traditional techniques, such as polymerase chain reaction and enzyme-linked immunosorbent assay, are accurate and effective, but are greatly limited because they are complex and time-consuming. Electrochemiluminescence (ECL) biosensors combine the advantages of both electrochemical and photoluminescence analysis and are suitable for high sensitivity and simple pathogenic bacteria detection. In this review, we summarize recent advances in ECL sensors for pathogenic bacteria detection and highlight the development of paper-based ECL platforms in point of care diagnosis of pathogens.

Recent Advances in Aggregation-Induced Electrochemiluminescence

The emergence of the rising alliance between aggregation-induced emission (AIE) and electrochemiluminescence (ECL) is defined as aggregation-induced electrochemiluminescence (AIECL). The booming science of AIE has proved to be not only distinguished in luminescent materials but could also inject new possibility into ECL analysis. Especially in the aqueous phase and solid state for hydrophobic materials, AIE helps ECL circumvent the dilemma between substantial emission intensity and biocompatible media. The wide range of analytes makes ECL an overwhelmingly interesting analytical technique. Therefore, AIECL has gained potential in clinical diagnostics, environmental assays, and biomarker detections. This review will focus on introduction of the novel concept of AIECL, current applied luminophores, and related applications developed in recent years.

Recent developments of photoelectrochemical biosensors for food analysis

Recent developments of photoelectrochemical biosensors for food analysis are summarized and the future prospects in this field are discussed.

Electrochemiluminescence of 3,4,9,10-perylenetetracarboxylic acid/oxamic hydrazide and its application in the detection of tannic acid

The electrochemiluminescence of 3,4,9,10-perylenetetracarboxylic acid/oxamic hydrazide is reported and used for tannic acid detection for the first time.

An enzyme-free electrochemiluminescence biosensor for ultrasensitive assay of Group B Streptococci based on self-enhanced luminol complex functionalized CuMn-CeO2 nanospheres

Herein, a novel and pragmatic electrochemiluminescence (ECL) biosensing method was developed for ultrasensitive and specific detection of Group B Streptococci (GBS) by combining self-enhanced luminol complex functionalized CuMn-CeO₂ (CuMn-CeO₂-PEI-luminol) with MNAzyme-mediated target-recycling amplification. First, the efficient self-enhanced PEI-luminol luminophore was prepared by combining PEI co-reactant with luminol in one molecular, which shortened electron transfer distance and enhanced ECL signal. And CuMn-CeO₂ was applied to load a large number of PEI-luminol and strengthen luminous efficiency of luminol by the high catalytic activity toward H₂O₂ oxidation. Then, target-driven MNAzyme system was used to realize the circulation of GBS nucleic acid sequence, producing plentiful triggers to initiate the hybridization reaction on the surface of electrode. The developed enzyme-free ECL biosensor showed ultra-sensitivity for target DNA detection with detection limits of 68 aM (synthetic DNA) and 5 × 10² CFU mL^-1 (genomic DNA extracted from GBS strain). More importantly, this biosensor was successfully applied for detection of genomic DNA of GBS extracted from clinical vaginal/anal swabs as low as 320 copies. Thus, this proposed strategy might be an pragmatic ECL platform for ultrasensitive and specific detection of GBS in clinical vaginal/anal swabs.

Ultrasensitive electrochemiluminescence determination of trace Ag ions based on the signal amplification caused by its catalytic effect on Mn(II) oxidation using graphite catheter as electrode

In this work, an ultrasensitive electrochemiluminescence (ECL) method was established for the detection of trace amount of Ag ions (Ag⁺). In sulfuric acid medium, Ag(II), the electro-oxidized product of Ag(I), oxidizes manganese ions (Mn²⁺) to produce permanganate (MnO₄^-) by using a pair of graphite catheters as electrodes. While permanganate and luminol can produce strong chemiluminescence, based on the catalytic effect of Ag(II) on Mn²⁺ oxidation, there is a good linear relationship between the concentration of Ag⁺ and luminescence intensity. Under optimized conditions, the linear range of this method for Ag⁺ is from 0.2 to 150 nM with a detection limit of 0.06 nM. The method was applied for determination of Ag⁺ in various water samples with satisfactory results.

Sensitive and Facile Electrochemiluminescent Immunoassay for Detecting Genetically Modified Rapeseed Based on Novel Carbon Nanoparticles

A highly sensitive electrochemiluminescent (ECL) immunoassay targeting PAT/ bar protein was facilely developed for genetically modified (GM) rapeseed detection using carbon nanoparticles (CNPs) originally prepared from printer toner. In this work, CNPs linked with antibody for PAT/ bar protein were used to modify a working electrode. After an immunoreaction between the PAT/ bar protein and its antibody, the immunocomplex formed on the electrode receptor region resulted in an inhibition of electron transfer between the electrode surface and the ECL substance, thus led to a decrease of ECL response. Under the optimal conditions, the ECL responses linearly decreased as the increase of the PAT/ bar protein concentration and the GM rapeseed RF3 content in the ranges of 0.10-10 ng/mL and 0.050-1.0%, with the limits of detection of 0.050 ng/mL and 0.020% (S/N = 3). These results open a facile, sensitive, and rapid approach for the safety control of agricultural GM rape.

Aggregation-Induced Electrochemiluminescence from a Cyclometalated Iridium(III) Complex

Aggregation-induced emission has been extensively found in organic compounds and metal complexes. In contrast, aggregation-induced electrochemiluminescence (AI-ECL) is rarely observed. Here, we employ two tridentate ligands [2,2':6',2″-terpyridine (tpy) and 1,3-bis(1 H-benzimidazol-2-yl)benzene (bbbiH₃)] to construct a cyclometalated iridium(III) complex, [Ir(tpy)(bbbi)] (1), showing strong AI-ECL. Its crystal structure indicates that neighboring [Ir(tpy)(bbbi)] molecules are connected through both π-π-stacking interactions and hydrogen bonds. These supramolecular interactions can facilitate the self-assembly of complex 1 into nanoparticles in an aqueous solution. The efficient restriction of molecular vibration in these nanoparticles leads to strong AI-ECL emission of complex 1. In a dimethyl sulfoxide-water (H₂O) mixture with a gradual increase in the H₂O fraction from 20% to 98%, complex 1 showed a ∼39-fold increase in the electrochemiluminescence (ECL) intensity, which was ∼4.04 times as high as that of [Ru(bpy)₃]²⁺ under the same experimental conditions. Moreover, the binding of bovine serum albumin to the nanoparticles of complex 1 can improve the ECL emission of this complex, facilitating the understanding of the mechanism of AI-ECL for future applications.

Biosensors for Sustainable Food Engineering: Challenges and Perspectives

Current food production faces tremendous challenges from growing human population, maintaining clean resources and food qualities, and protecting climate and environment. Food sustainability is mostly a cooperative effort resulting in technology development supported by both governments and enterprises. Multiple attempts have been promoted in tackling challenges and enhancing drivers in food production. Biosensors and biosensing technologies with their applications, are being widely applied to tackling top challenges in food production and its sustainability. Consequently, a growing demand in biosensing technologies exists in food sustainability. Microfluidics represents a technological system integrating multiple technologies. Nanomaterials, with its technology in biosensing, is thought to be the most promising tool in dealing with health, energy, and environmental issues closely related to world populations. The demand of point of care (POC) technologies in this area focus on rapid, simple, accurate, portable, and low-cost analytical instruments. This review provides current viewpoints from the literature on biosensing in food production, food processing, safety and security, food packaging and supply chain, food waste processing, food quality assurance, and food engineering. The current understanding of progress, solution, and future challenges, as well as the commercialization of biosensors are summarized.

Ru(bpy)32+-Silica@Poly-L-lysine-Au as labels for electrochemiluminescence lysozyme aptasensor based on 3D graphene

In this work, the feasibility of a novel sensitive electrochemiluminescence aptasensor for the detection of lysozyme using Ru(bpy)₃²⁺-Silica@Poly-L-lysine-Au (RuSiNPs@PLL-Au) nanocomposites labeling as an indicator was demonstrated. The substrate electrode of the aptasensor was prepared by depositing gold nanoparticles (AuNPs) on 3D graphene-modified electrode. The lysozyme binding aptamer (LBA) was attached to the 3D graphene/AuNPs electrode through gold-thiol affinity, hybridized with a complementary single-strand DNA (CDNA) of the lysozyme aptamer labeled by RuSiNPs@PLL-Au as an electrochemiluminescence intensity amplifier. Thanks to the synergistic amplification of the 3D graphene, the AuNPs and RuSiNPs@PLL-Au NPs linked to Ru(bpy)₃²⁺-ECL further enhanced the ECL intensity of the aptasensor. In presence of lysozyme, the CDNA segment of the self-assembled duplex was displaced by the lysozyme, resulting in decreased electrochemiluminescence signal. Under the optimized conditions, the decrease in electrochemiluminescence intensity varied proportionally with the logarithmic concentration of the lysozyme from 2.25 × 10^-12 to 5.0 × 10^-8 mol L^-1, and the detection limit was estimated to 7.5 × 10^-13 mol L^-1. The aptasensor was further tested in real samples and found reliable for the detection of lysozyme, thus holding great potential application in food safety researches and bioassay analysis.

Graphitic-phase carbon nitride-based electrochemiluminescence sensing analyses: recent advances and perspectives

This review describes the current trends in synthesis methods, signaling strategies, and sensing applications of g-C₃N₄-based ECL emitters.