Development and application of metal organic framework/chitosan foams based on ultrasound-assisted solid-phase extraction coupling to UPLC-MS/MS for the determination of five parabens in water

Environmental applications of metal-organic framework-based three-dimensional macrostructures: a review

Metal-organic frameworks (MOFs) hold considerable promise for environmental remediation owing to their exceptional performance and distinctive structure. Nonetheless, the practical implementation of MOFs encounters persistent technical hurdles, notably susceptibility to loss, challenging recovery, and potential environmental toxicity arising from the fragility, insolubility, and poor processability of MOFs. MOF-based three-dimensional macrostructures (3DMs) inherit the advantageous attributes of the original MOFs, such as ultra-high specific surface area, tunable pore size, and customizable structure, while also incorporating the intriguing characteristics of bulk materials, including hierarchical structure, facile manipulation, and structural flexibility. Consequently, they exhibit rapid mass transfer and exceptional practicality, offering extensive potential applications in environmental remediation. This review presents a comprehensive overview of recent advancements in utilizing MOF-based 3DMs for environmental remediation, encompassing their fascinating characteristics, preparation strategies, and characterization methods, and highlighting their exceptional performance in pollutant adsorption, catalysis, and detection. Furthermore, existing challenges and prospects are presented to advance the utilization of MOF-based materials across various domains, particularly in environmental remediation.

Metal organic framework derived composite as a new sorbent for micro-solid phase extraction of parabens from breast milk samples

In an attempt to enhance the adsorptive properties while addressing the limitations associated with powdered nature, zeolitic imidazolate framework (ZIF-67)-derived cobalt-doped nanoporous carbon (Co-NPC) was incorporated into chitosan and then shaped like hollow fiber by a simple casting method. Further modification with polyaniline (PANI) was also performed to improve extraction efficacy. The applicability of the modified hollow fibers was then investigated by packing them into a cartridge and utilizing them for conducting hollow fibers-packed in-cartridge micro solid-phase extraction (HF-IC µ-SPE) of parabens including methylparaben (MP), ethylparaben (EP), and propylparaben (PP) from human breast milk samples. Factors affecting extraction performance were studied using central composite design (CCD). Under the optimal conditions, good linearity was achieved within the range of 0.5-500 μg L-1 with the determination coefficient (R2) higher than 0.9901. All analytical parameters were obtained by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. In this regard, the limits of detection values (LODs) were 0.5 to 1.0 μg L-1. Intra- and inter-assay precision RSDs % were lower than 7.9 % and 8.4 %, respectively. Relative recoveries of breast milk samples were found in the range of 88.0-109.5 %. Accordingly, the novel nanocomposite sorbent based on PANI@Co-NPC/Chitosan hollow fiber was found to be an efficient, simple, and cost-effective packing material for HF-IC µ-SPE. It can also be offered as a promising alternative adsorbent to coated conventional hollow fiber.

Overview of Liquid Sample Preparation Techniques for Analysis, Using Metal-Organic Frameworks as Sorbents

The preparation of samples for instrumental analysis is the most essential and time-consuming stage of the entire analytical process; it also has the greatest impact on the analysis results. Concentrating the sample, changing its matrix, and removing interferents are often necessary. Techniques for preparing samples for analysis are constantly being developed and modified to meet new challenges, facilitate work, and enable the determination of analytes in the most comprehensive concentration range possible. This paper focuses on using metal-organic frameworks (MOFs) as sorbents in the most popular techniques for preparing liquid samples for analysis, based on liquid-solid extraction. An increase in interest in MOFs-type materials has been observed for about 20 years, mainly due to their sorption properties, resulting, among others, from the high specific surface area, tunable pore size, and the theoretically wide possibility of their modification. This paper presents certain advantages and disadvantages of the most popular sample preparation techniques based on liquid-solid extraction, the newest trends in the application of MOFs as sorbents in those techniques, and, most importantly, presents the reader with a summary, which a specific technique and MOF for the desired application. To make a tailor-made and well-informed choice as to the extraction technique.

Preparation of cylindrical Chitosan/β-Cyclodextrin/MIL-68(Al) foam column for solid-phase extraction of sulfonamides in water, urine, and milk

This study describes the preparation of a cylindrical polymer foam column termed Chitosan/β-Cyclodextrin/MIL-68(Al) (CS/β-CD/MIL-68(Al)). An ice template-freeze drying technique was employed to prepare the CS/β-CD/MIL-68(Al) foam column by embedding MIL-68(Al) in a polymer matrix comprising cross-linked chitosan (CS) and β-cyclodextrin (β-CD). The cylindrical CS/β-CD/MIL-68(Al) foam was subsequently inserted into a syringe to develop a solid phase extraction (SPE) device. Without the requirement for an external force, the sample solution passed easily through the SPE column thanks to the porous structure of the CS/β-CD/MIL-68(Al) foam column. Moreover, the CS/β-CD/MIL-68(Al) foam column was thought to be a superior absorbent for SPE since it included the adsorptive benefits of CS, β-CD, and MIL-68(Al). The SPE was utilized in conjunction with high-performance liquid chromatography to analyze six sulfonamides found in milk, urine, and water. With matrix effects ranging from 80.49 % to 104.9 % with RSD values of 0.4-14.0 %, the method showed high recoveries ranging from 80.6 to 107.4 % for water samples, 93.4-105.2 % for urine, and 87.4-100.9 % for milk. It also demonstrated good linearity in the range of 10-258 ng·mL-1 with the limits of detection ranging from 1.88 to 2.58 ng·mL-1. The cylindrical CS/β-CD/MIL-68(Al) foam column prepared in this work offered several advantages, including its simple fabrication, excellent water stability, absence of pollutants, biodegradability, and reusability. It is particularly well-suited for SPE. Furthermore, the developed SPE method, employing CS/β-CD/MIL-68(Al) foam column, is straightforward and precise, and its benefits, including affordability, ease of preparation, lack of specialized equipment, and solvent economy, underline its broad applicability for the pretreatment of aqueous samples.

Chitosan-based aerogels: A new paradigm of advanced green materials for remediation of contaminated water

Chitosan (CS) aerogels are highly porous (∼99 %), exhibit ultralow density, and are excellent sorbents for removing ionic pollutants and oils/organic solvents from water. Their abundant hydroxyl and amino groups facilitate the adsorption of ionic pollutants through electrostatic interaction, complexation and chelation mechanisms. Selection of suitable surface wettability is the way to separate oils/organic solvents from water. This review summarizes the most recent developments in improving the adsorption performance, mechanical strength and regeneration of CS aerogels. The structure of the paper follows the extraction of chitosan, preparation and sorption characteristics of CS aerogels for heavy metal ions, organic dyes, and oils/organic solvents, sequentially. A detailed analysis of the parameters that influence the adsorption/absorption performance of CS aerogels is carried out and their effective control for improving the performance is suggested. The analysis of research outcomes of the recently published data came up with some interesting facts that the unidirectional pore structure and characteristics of the functional group of the aerogel and pH of the adsorbate have led to the enhanced adsorption performance of the CS aerogel. Finally, the excerpts of the literature survey highlighting the difficulties and potential of CS aerogels for water remediation are proposed.

MIL-68 (Ga) for the extraction of derivatized and non-derivatized parabens from healthcare products

This study was the first-ever attempt to apply MIL-68 (Ga) in developing an analytical method. The method extracts and preconcentrates some parabens from mouthwash and hydrating gel samples. The variable extraction parameters were optimized, and the figures of merit were documented. Avogadro software was used besides discussing intermolecular interactions to clarify the absorption process. ComplexGAPI software was also exploited to assess the greenness of the method. After the derivatization of the parabens using acetic anhydride in the presence of sodium carbonate, sodium chloride was added to the solution and vortexed to dissolve. A few milligrams of MIL-68 (Ga) were added into the solution and vortexed. Centrifugation separated the analyte-loaded absorbent, which was treated with mL volume of methanol through vortexing for desorption aim. A few microliters of 1,2-dibromoethane were merged with the methanolic phase and injected into a sodium chloride solution. One microliter of the extracted phase was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (200-330), reasonable extraction recoveries (40-66%), wide linear ranges (265-30,000 µg L-1), and appreciable coefficients of determination (0.996-0.999) were documented. The applicability of dispersive solid phase extraction for extracting polar analytes, imposing no additional step for performing derivatization, the capability of MIL-68 (Ga) for the absorption of both derivatized and non-derivatized parabens, the use of only 10 mg absorbent, and one-pot synthesis besides no high temperature or long reaction time in the sorbent provision are the highlights of the method.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

Microextraction by packed sorbent of some β-blocker drugs with chitosan@mof-199 bio-composite in human saliva, plasma, and urine samples

The current study introduces microextraction by packed sorbent (MEPS) to extract three beta-blocker drugs (propranolol, atenolol, and betaxolol) from biological samples. The separation and detection of the drugs were performed by high performance liquid chromatography followed by UV detection. A green approach was applied for synthesizing chitosan@MOF-199 bio-composite, which was packed into the initial part of a metal spinal (22 gage). The effective parameters on the adsorption and desorption efficiencies, including sample solution pH, eluent flow rate, cycle numbers, type and volume of eluent solvent were evaluated and optimized. Under optimal conditions linear ranges (LRs = 5-600 µg L-1), limits of detection (LODs = 1.5-4.5 µg L-1), and relative standard deviations (RSDs% = 4.7 -5.3% with three replicates and concentration of 100 µg L-1) were obtained. Relative recoveries (RR%) for plasma (77-99%), saliva (81-108%), and urine (80-112%) samples were obtained. In this study, the drug release profile of propranolol in urine was evaluated. The results showed that the highest amount of propranolol is released 4 h after taking the drug. Based on the obtained results, this is an effective, fast, sensitive, reproducible, green, and user-friendly method for beta-blocker drug extraction in biological samples.

Monolithic and compressible MIL-101(Cr)/cellulose aerogel/melamine sponge based microextraction in packed syringe towards trace nitroimidazoles in water samples prior to UPLC-MS/MS analysis

In this study, MIL-101(Cr)/cellulose aerogel/melamine sponge composite was fabricated through a simple soaking method. The composite was packed in the syringe barrel and used as the sorbent for microextraction in packed syringe. Coupled to UPLC-MS/MS, the proposed method was employed for the analysis of trace nitroimidazoles in water samples. The parameters affecting the extraction efficiency, including sorbent type, pH value of sample solution, sample solution volume and elution solvent were optimized. Under the optimal conditions, good linearity (r > 0.99 for five analytes), high sensitivity (limit of detection: 8.250-16.33 ng L^-1), ideal precision (intra-day precision: 1.1%-5.3%, inter-day precision: 1.8%-6.7%) and satisfactory accuracy (recovery: 70.4%-96.7%) were achieved. The proposed method was proved to be efficient, easily operative and environmentally friendly.

Development of a new strategy for the synthesis of graphene oxide-alumina nanocomposite as an efficient adsorbent for dispersive solid-phase extraction of parabens

The present study investigates the synthesis and application of the graphene oxide-alumina nanocomposite as a new adsorbent for the dispersive solid-phase extraction of three parabens and their determination using high-performance liquid chromatography-ultraviolet detection. The characterization of the synthesized material was accomplished and its size, morphology, chemical composition, porosity, and thermal stability were studied. Application of the proposed strategy for the synthesis of the nanocomposite resulted in the incorporation of Al₂ O₃ nanoparticles into graphene oxide nanosheets, further resulting in the exfoliation of graphene oxide nanosheets increasing their surface area. An orthogonal rotatable central composite design was used to optimize the extraction. Under the optimum conditions, the analytical performance of the method showed a suitable linear dynamic range (0.2-100.0 μg/L), reasonable limits of detection (0.03-0.05 μg/L), and preconcentration factors ranging from 128 to 173. Finally, the new validated method was applied for the determination of parabens in some real samples including wastewater, cream, toothpaste, and juice samples with satisfactory recoveries (88%-109%), and relative standard deviations less than 8.7% (n = 3). Results demonstrated that inserting alumina nanoparticles into graphene oxide nanosheets improved the extraction efficiency of parabens, as polar acidic compounds, by providing additional efficient interactions including hydrogen bonding, dipole-dipole, and Brønsted and Lewis acid-base interactions.

A membrane solid-phase extraction method based on MIL-53-mixed-matrix membrane for the determination of estrogens and parabens: polyvinylidene difluoride membrane vs. polystyrene-block-polybutadiene membrane

In this work, MIL-53(Al), as an inorganic 'filler' component, was embedded in polyvinylidene difluoride (PVDF) and polystyrene-block-polybutadiene (SBS) matrices to prepare two mixed-matrix membranes (MMMs), using a simpler method than that previously reported. The PVDF and SBS membranes retained much of the properties of PVDF, SBS, and native MIL-53(Al). The prepared MMMs were then placed in a vortex-stirred sample solution to develop a membrane solid-phase extraction method to extract estrogens and parabens which were determined by high-performance liquid chromatography with fluorescence detection. The extraction efficiencies of the two membranes were compared, with the PVDF membrane exhibiting superior performance. In addition, the PVDF membrane was more free-standing and flexible, and its preparation method was also more facile and simple. The extraction conditions were optimized, and the analytical method showed low limits of detection (0.005-0.18 ng/mL), good linearity, and high accuracy, with recoveries ranging from 90.7 to 102.5%. As a result, this membrane solid-phase extraction method indicated its potential for application in aqueous sample pretreatment. For metal-organic framework based MMM used in this method, in addition to being durable, free-standing, mechanically stable, and possessing a large area, it should also exhibit high MOF incorporation, good flexibility, and appropriate thickness and weight.

Molecularly imprinted wax

The development of an elution-free solid-phase extraction (SPE) process is of special interest in sample pretreatment. Due to the phase-change merits at relatively low temperatures and easy dissolution in n-hexane, wax spheres show great potential in this field. However, the conventional wax spheres possess a low affinity towards the target analytes when they are used as SPE adsorbents. In this study, using octadecanoic acid as the functional monomer and wax as the matrix, molecularly imprinted wax (MIW) spheres were successfully prepared. The obtained MIW spheres displayed remarkable molecular recognition ability and high selectivity towards the template. Interestingly, the as-synthesized molecularly imprinted wax (MIW) could be dissolved in n-hexane or melted by heating for subsequent fluorescence and mass spectrum analysis without the target elution process. Moreover, the melted MIW exhibited high repeatability, sensitivity and specificity for solid-state fluorescence detection. We believe that the imprinting method presented in this study will open a new window in analytical chemistry.

Synthesis of aqueous media stable MIL101-OH/chitosan for diphenhydramine and metronidazole adsorption

In this study, pristine MIL101(Cr) was modified to synthesize hydroxyl-functionalized (MIL101(Cr)-OH) and chitosan (CS)-coated (MIL101(Cr)-OH/CS) metal-organic frameworks (MOFs) to enhance adsorption capacity and reusability, respectively. The synthesized adsorbents were characterized by XRD, FTIR, and BET analyses. The kinetics behavior and the equilibrium adsorption of diphenhydramine (DPH) and metronidazole (MNZ) from aqueous solution on the synthesized adsorbents and a commercial activated carbon were compared at 25°C. The pH-dependent of the adsorption capacity and reusability of MIL101-OH/CS were investigated. The results showed that upon adding OH functional group and chitosan polymer, the adsorption capacity increased; the DPH adsorption capacity on MIL101-OH and MIL101-OH/CS was 634 and 573 mg/g, respectively. Also, the maximum adsorption capacity of MNZ on MIL101-OH/CS was 600 mg/g, which was twice the adsorption capacity of MIL101 and four times the adsorption capacity of the commercial activated carbon. The equilibrium and kinetics behavior results were in good agreement with Langmuir and the pseudo-second-order models, respectively. The DPH and MNZ adsorption mechanisms on MIL101-OH/CS were hydrogen bonding and electrostatic interactions, respectively.

Macro-microporous zeolitic imidazole framework-8/cellulose aerogel for semi-automated pipette tip solid phase extraction of fluoroquinolones in water

In this study, Zeolitic Imidazole Framework-8/cellulose aerogel (ZIF-8/CA) hybrid was successfully fabricated through a simple doping method and ZIF-8 acted as the major component for adsorption. In order to elucidate the adsorption mechanism deeply, molecular simulation was adopted to the expound the interaction modes between ZIF-8 and the fluoroquinolones (FQs). ZIF-8/CA was used as the adsorbent for semi-automated pipette tip solid phase extraction (PT-SPE). In combination with high performance liquid chromatography tandem fluorescence detector (HPLC-FLD), the established method was successfully employed to determine trace amount of FQs in water samples. Extraction parameters such as the content of ZIF-8, pH of sample solution, volume of sample, flow rate of sampling, type and volume of elution solvent were investigated. Under the optimized conditions, satisfactory linearity was achieved with the correlation coefficient (R²) ranging from 0.9954 to 0.9992. The limits of detection were in the range of 0.337-1.707 ng L^-1. And the recoveries varied from 75.9% to 96.8% with RSD less than 8.0%. The established method was demonstrated to be sensitive, efficient and convenient.

Molybdenum disulfide-graphene oxide composites as dispersive solid-phase extraction adsorbents for the enrichment of four paraben preservatives in cosmetics

Molybdenum disulfide-graphene oxide composite (MoS₂/GO) was synthesized and used as the adsorbent in dispersive solid-phase extraction. Four paraben preservatives, namely, methylparaben, ethylparaben, propylparaben, and butylparaben, were enriched with MoS₂/GO and determined by ultra-high-performance liquid chromatography. Molybdenum disulfide was intercalated into graphene oxide layers to reduce self-aggregation by using the solvothermal method. The experimental results indicated that the as-prepared MoS₂/GO composite exhibited great enrichment capability toward those four paraben preservatives, and the adsorption time was 10 min and the elution time was as short as 1 min. The mechanism of MoS₂/GO composite and parabens is attributed to hydrogen bonding and electrostatic attraction. The relative standard deviation (RSD, n = 9) of this method was below 7.6%. Limits of detection and limits of quantification were in the range 0.4-2.3 ng/mL and 1.4-7.6 ng/mL, respectively. The recoveries obtained from the parabens of cosmetic sample were in the range 91.3-124% with RSDs below 10%. The developed method has great potential for the determination of emerging contaminants with low cost and high sensitivity.

Low-cost disposable Poly(ethyleneimine)-Functionalized Carbon Nanofibers Coated Cellulose Paper as efficient solid phase extraction sorbent material for the extraction of Parahydroxybenzoates from environmental waters

Parahydroxybenzoates (parabens) are considered as emerging environmental contaminants because of their extensive usage in our daily life products, causing parabens contamination into environmental water systems and lead to toxic effects on environmental health. This study describes a greener extraction method using a new cationic polymer poly (ethyleneimine) functionalized acid-treated carbon nanofibers (PEI-CNFs) coated cellulose paper (CP) as solid-phase extraction (SPE) sorbent material for the extraction of parabens from environmental water samples. The fabrication of PEI-CNFs modified CP was confirmed using field-emission scanning electron microscope, transmission electron microscopy, and fourier-transformer infrared spectroscopy techniques. Various factors affecting the adsorption and desorption of parabens on PEI-CNFs@CP and its extraction efficiencies were studied using HPLC-UV analysis. Under the optimal experimental conditions, maximum extraction efficiencies were achieved for four target parabens, and PEI-CNFs@CP/HPLC-UV method exhibited excellent linearities ranged from 0.5-50 ng mL^-1 with regression coefficient values were between 0.9952-0.9970. The presented method showed good sensitivity with quantification limits between 0.5-0.75 ng mL^-1 and detection limits between 0.1-0.25 ng mL^-1. The developed technique was applied for the real sample analysis (river, lake, domestic sewage water, and drinking tap water). The spiked recovery revealed good recoveries between 86.8-116.0% with RSD less than 8.8% for all the water samples. These results proved that it a simple, fast, efficient, low-cost, and eco-friendly method for the extraction and determination of parabens in environmental water samples and can be applied as a routine analytical tool in environmental monitoring and quality control laboratories.

Vortex-assisted solid-phase extraction based on metal-organic framework/chitosan-functionalized hydrophilic sponge column for determination of triazine herbicides in environmental water by liquid chromatography-tandem mass spectrometry

In the presented work, MIL-101(Cr) and chitosan were directly embedded on the skeleton of melamine sponge material using a simple and environmentally friendly method. Chitosan acts not only as an adhesive during the preparation of functionalized sponges, but also as an adsorption adjuvant in herbicide detection. Unlike other polymers, chitosan has excellent hydrophilicity and contains numerous adsorption sites; thus, it enables the sponge material to be used for determination of contaminants in an aqueous phase. Scanning electron microscopic (SEM) analysis showed that the coating material was uniformly distributed on the skeleton of melamine sponge. The prepared material was used as a sorbent in a vortex-assisted solid-phase extraction and combined with high performance liquid phase tandem mass spectrometry for the extraction and trace determination of six triazines in water samples (Atraton, Desmetryn, Prometon, Ametryn, Prometryn and Dimethametryn). Several parameters that affect the extraction efficiencies were investigated. Under the optimal conditions (MIL-101(Cr) loading, 150 mg; sample pH, 7; salt concentration, 0%; adsorption time, 3 min; desorption solvent, 1.5 mL acetonitrile; desorption time, 4 min), the proposed method was successfully used in the determination of trace triazines in five real water samples (drinking water, tap water, lake waters and river water), satisfactory recoveries were obtained in the range of 78.9%-118.6%. The limits of detection of the proposed method in detecting triazine herbicides in spiked water samples ranged from 0.014 to 0.045 ng mL^-1.

HKUST-1 modified ultrastability cellulose/chitosan composite aerogel for highly efficient removal of methylene blue

A novel composite HKUST-1/cellulose/chitosan aerogel (HKUST-1/CCSA) as an efficient adsorbent with hierarchical pores was prepared through a facile in situ growth way combining covalent cross-linking, vacuum freeze-drying, and solvothermal methods. By incorporating with cellulose (CE), covalently cross-linked cellulose (CE)/chitosan (CS) composite aerogel exhibits good stability, maintaining fine morphology and structures in acidic solutions under solvothermal conditions. Meantime, a high content of CS is beneficial to enhancing the growth of HKUST-1. Finally, the mass loading ratio of HKUST-1 is as high as 42.54 % in HKUST-1/CCSA. The BET specific surface area of HKUST-1/CCSA reaches 457.75 m² g^-1, which is much larger than that of CCSA (9.74 m² g^-1). HKUST-1/CCSA was applied to remove methylene blue with high adsorption capacity (526.3 mg g^-1) and good recycling capability. This strategy can provide an effective and facile pathway to prepare ultra-stable polysaccharide-based composite aerogel with high specific surface area and hierarchical pores, branching out more applications in pollutant treatment fields.

Recent Advances in Affinity MOF-Based Sorbents with Sample Preparation Purposes

This review summarizes the recent advances concerning metal-organic frameworks (MOFs) modified with several biomolecules (e.g., amino acids, nucleobases, proteins, antibodies, aptamers, etc.) as ligands to prepare affinity-based sorbents for application in the sample preparation field. The preparation and incorporation strategies of these MOF-based affinity materials were described. Additionally, the different types of ligands that can be employed for the synthesis of these biocomposites and their application as sorbents for the selective extraction of molecules and clean-up of complex real samples is reported. The most important features of the developed biocomposites will be discussed throughout the text in different sections, and several examples will be also commented on in detail.

Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future

Even though instrumental advancements are constantly being made in analytical chemistry, sample preparation is still considered the bottleneck of analytical methods. To this end, researchers are developing new sorbent materials to improve and replace existing ones, with the ultimate goal to improve current methods and make them more efficient and effective. A few years ago, an alternative trend was started toward sample preparation: the use of sponge or sponge-like materials. These materials possess favorable characteristics, such as negligible weight, open-hole structure, high surface area, and variable surface chemistry. Although their use seemed promising, this trend soon reversed, due to either the increasing use of nanomaterials in sample preparation or the limited scope of the first materials. Currently, with the development of new materials, such as melamine sponges, along with the advancement in nanotechnology, this topic was revived, and various functionalizations were carried out on such materials. The new materials are used as sorbents in sample preparation in analytical chemistry. This review explores the development of such materials, from the past to the present and into the future, as well as their use in analytical chemistry.

Metal organic framework/chitosan foams functionalized with polyethylene oxide as a sorbent for enrichment and analysis of bisphenols in beverages and water

MIL-53(Al)/CS/PEO foam as a sorbent for the vortex assisted solid phase extraction of a trace amount of five bisphenols in beverages and water.