Ultrasensitive photoelectrochemical aptasensor for diclofenac sodium based on surface-modified TiO2-FeVO4 composite

Study on the photo/electrochemical bi-functional properties of a coupling interface of Ru[dcbpy]32+-AMT/Au by SECM imaging-based joint analytical method

A photo/electrochemical coupling interface of Ru[dcbpy]32+-AMT/Au (AMT; 5-Amino-1,3,4-thiadiazole-2-thiol) was fabricated using a dehydration condensation sulfhydrating method. For the interface functional properties, a combined dual-signal recording (CDSR) method was applied to characterize the response characteristics, and a scanning electrochemical microscopy-electrochemiluminescence (SECM-ECL) imaging was developed to assess the interface distribution uniformity. The interface biosensing compatibility was validated by constructing a simple DNA sensor. The research results show that the interaction between the two functional parameters follows a synergistic effect mechanism in the coupling conditions and an interference effect mechanism in the detection condition. Under optimized conditions, the saturation dual-signal response values are 156.0 and 86.8 μA, respectively. The statistics and imaging comparison analysis validate good interface distribution uniformity and stability performance. The DNA sensor's dual-signal detection limits to the signal probe (SP) are ∼30 fM and 0.3 pM with linear ranges of 100.0 fM ∼ 1.0 nM and 1.0 pM ∼ 10.0 nM, respectively. The fabricated interface exhibits an effective bi-functional response performance compatible with biosensing. The proposed imaging method has a high technical fit for studying photo/electrochemical coupling interfaces and can also provide a reference for other similar coupling interface analyses.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL-1-0.1 μg mL-1 and a lower limit of detection of 0.07 pg mL-1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

An ultrasensitive photo-driven self-powered aptasensor for microcystin-RR assay based on ZnIn2S4/Ti3C2 MXenes integrated with a matching capacitor for multiple signal amplification

A photo-driven self-powered aptasensor was constructed based on a matching capacitor and the ZnIn2S4/Ti3C2 heterojunction as the photoanode and Cu2O as the photocathode in a dual-photoelectrode sensing matrix for multiple signal amplification for the ultrasensitive detection of microcystin-RR (MC-RR). The introduction of Ti3C2 MXene nanosheets on the photoanode surface can not only accelerate the transfer and separation of photoinduced electron/hole pairs, thus enhancing the output signal of the photo-driven self-powered system, but also provide a larger specific surface area for the immobilization of the bio-recognition unit aptamer. More importantly, for a portable and miniaturized device, a micro-workstation with the size of a universal serial bus (USB) disk and a novel short-circuit current access was proposed to capture the instantaneous output electrical signal for real-time data tracking. In such a way, a sensitivity of 2.7 mA pM-1 was achieved when the matching capacitor was integrated into the self-powered system, which was 22 times that without a capacitor. After the interaction between MC-RR and the corresponding aptamer, a 'signal-off' detection configuration was formed via the steric hindrance effect. Therefore, such a multiple signal amplification system realized the ultrasensitive and selective determination of MC-RR successfully. Under optimal conditions, the linear range of the self-powered aptasensor was 0.1 to 100 pM and the detection limit was 0.033 pM (S/N = 3). The aptasensor was applied to the detection of MC-RR in fish, exhibiting good reproducibility (≈3.88%), paving the way for detecting microcystins in real-life samples.

Highly efficient photocathodic cascade material for constructing sensitive photoelectrochemical biosensor

Photocathodic biosensor possesses excellent anti-interference capability in bioanalysis, which however suffers from high electron-hole recombination rate with low photocurrent. Herein, a high-performance inorganic organic P₃HT@C₆₀@ZnO nanosphere with cascade energy band arrangement was synthesized as photoactive signal probe, which inherited the advantages of inorganic strong optical absorptivity and organic high mobility for photo-generated holes. Specifically, the well-matched band gap endowed not only the improved life for light generated carrier and promoted separation of electron-hole pairs, but also the expansion of charge-depletion layer, significantly improving the photoelectric conversion efficiency for acquiring an extremely high photocathodic signal that increased by 30 times compared with individual materials. Accordingly, by integrating with the efficient amplification of DNA nanonet derived from clamped hybrid chain reaction (C-HCR), a sensitive P₃HT@C₆₀@ZnO nanosphere based photocathodic biosensor was proposed for accurate detection of p53. The experimental results showed that the biosensor had a wide detection range from 0.1 fM to 10 nM and a low detection limit of 0.37 fM toward p53, offering a new avenue to construct sensitive PEC platform with superior anti-interference ability and hold a prospective application in early disease diagnosis and biological analysis.

Antibody-free photoelectrochemical biosensor for DNA carboxylation detection based on SnS2@Ti3C2 heterojunction

As an important epigenetic modification, 5-carboxycytosine (5caC) played an important role in gene regulation, cell differentiation and growth. 5caC existed in many cells and tissues, but it was highly similar to the structure of other cytosine derivatives and had less content in the genome. Therefore, it was urgent to develop a sensitive and highly selective trace biosensor to detect 5caC. A novel photoelectrochemical biosensor was fabricated for 5-carboxy-2'-deoxycytidine-5'-triphosphate (5cadCTP) detection, where SnS₂@Ti₃C₂ nanocomposite was employed as photoactive material, polyethyleneimine was used as 5cadCTP recognition and capture reagent, and Ru(NH₃)₆³⁺ was used as photosensitizer for signal amplification. Due the good conductivity of Ti₃C₂ MXene and the matched energy band between Ti₃C₂ MXene and SnS₂, SnS₂@Ti₃C₂ nanocomposite presented strong photoactivity, which was beneficial to the high detection sensitivity. For specific recognition of 5cadCTP, the covalent interaction of -NH₂ in 5cadCTP with -COOH on the substrate electrode was used, which was beneficial to the high detection selectivity. A broad linear relationship between photocurrent and 5cadCTP concentration was observed ranging from 1 pM to 0.2 μM. The low detection limit of 260 fM was achieved. The developed method has high detection specificity and can even distinguish 5caC with its derivatives. In addition, the applicability was evaluated by detecting the content change of 5caC in the genomic DNA of rice seedlings after cultured with environmental pollutants. This work provides a novel platform for 5cadCTP detection, and it can also be applied to detect other cytosine derivatives with suitable recognition strategies.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

CeO2@NH2 functionalized electrodes for the rapid detection of SARS-CoV-2 spike receptor binding domain

A detection method based on an electrochemical aptasensor has been developed as an alternative fast, portable, simple, inexpensive, and high-accuracy detection method for detecting the SARS-CoV-2 Spike Receptor Binding Domain (spike RBD). The CeO₂@NH₂ functionalized Screen Printed Carbon Electrode (SPCE) was used to immobilize an aminated aptamer of spike RBD protein via glutaraldehyde as a linker. The aptamer's interaction with the SARS-CoV-2 Spike RBD was measured via the [Fe(CN)₆]^4-/3- redox system signal. Experimental conditions were optimized using a Box-Behnken experimental design and showed that the optimal conditions of the SARS-CoV-2 aptasensor were 1.5 ng mL^-1 of aptamer, immobilization of aptamer for 60 minutes, and Spike RBD incubation for 10 minutes. The developed aptasensor was able to detect the standard SARS-CoV-2 Spike RBD with a detection limit of 0.017 ng mL^-1 in the range of 0.001-100 ng mL^-1. This aptasensor was used to detect salivary and oropharyngeal swab samples of normal individuals with the addition of Spike RBD, and the recoveries were 92.96% and 96.52%, respectively. The testing on nasopharyngeal swab samples of COVID-19 patients showed that the aptasensor results were comparable with the qRT-PCR results. Thus, the developed aptasensor has the potential to be applied as a SARS-CoV-2 rapid test method for clinical samples.

A Visible-Light-Active CuS/MoS2/Bi2WO6 Aptamer Sensitively Detects the Non-Steroidal Anti-Inflammatory Drug Diclofenac

Diclofenac is a non-steroidal, anti-inflammatory drug and is clinically used for the treatment of osteoarthritis, non-articular rheumatism, etc. This research aimed to demonstrate the creation of an upgraded photoelectrochemical (PEC) aptamer sensor for detecting diclofenac (DCF) with high sensitivity. In this work, photoactive materials and bio-identification components served as visible-light-active CuS/MoS₂/Bi₂WO₆ heterostructures and aptamers, respectively. CuS and MoS₂/Bi₂WO₆ were combined to improve photocurrent responsiveness, which helped the structure of PEC aptasensors. Additionally, the one-pot synthesis of CuS/MoS₂/Bi₂WO₆ was ecologically beneficial. With these optimizations, the photocurrent response of aptamer/CS/CuS/MoS₂/Bi₂WO₆ exhibited linearity between 0.1 and 500 nM DCF. The detection limit was 0.03 nM (S/N = 3). These results suggest that the PEC sensing technique might produce an ultra-sensitive sensor with high selectivity and stability for DCF detection.

Carbon dots induced in-situ formation of porous europium micro-networks with enhanced photocatalysis

Excellent photocatalysts are highly desirable for clean energy and pollutant treatment. Carbon dots (CDs)-based composite photocatalysts have been widely studied and utilized in catalytic fields. However, the preparation of the photocatalysts with high catalytic activity still faces a great challenge. Herein, white-light-driven CDs-based porous europium micro-networks (CDs@P-Eu-MNs) composite photocatalysts are prepared by a facile in-situ growth strategy. CDs can affect the morphology and produce a large number of porous structures of CDs@P-Eu-MNs. Importantly, the introduction of CDs not only increases the light absorption, but also promotes the separation of photogenerated charge carriers, and thus improve photocatalytic performance of CDs@P-Eu-MNs composites. CDs@P-Eu-MNs show the highest photocurrent density, which can be used for the highly-efficient photodegradation of rhodamine 6G dyes with almost 95% degradation rate under low power white light (20 W) without any radical generating agents such as H₂O₂. Therefore, this new and efficient CDs@P-Eu-MNs photocatalyst will have a great application prospect in water pollution treatment.

Clinically oriented Alzheimer's biosensors: expanding the horizons towards point-of-care diagnostics and beyond

The development of minimally invasive and easy-to-use sensor devices is of current interest for ultrasensitive detection and signal recognition of Alzheimer's disease (AD) biomarkers. Over the years, tremendous effort has been made on diagnostic platforms specifically targeting neurological markers for AD in order to replace the conventional, laborious, and invasive sampling-based approaches. However, the sophistication of analytical outcomes, marker inaccessibility, and material validity strongly limit the current strategies towards effectively predicting AD. Recently, with the promising progress in biosensor technology, the realization of a clinically applicable sensing platform has become a potential option to enable early diagnosis of AD and other neurodegenerative diseases. In this review, various types of biosensors, which include electrochemical, fluorescent, plasmonic, photoelectrochemical, and field-effect transistor (FET)-based sensor configurations, with better clinical applicability and analytical performance towards AD are highlighted. Moreover, the feasibility of these sensors to achieve point-of-care (POC) diagnosis is also discussed. Furthermore, by grafting nanoscale materials into biosensor architecture, the remarkable enhancement in durability, functionality, and analytical outcome of sensor devices is presented. Finally, future perspectives on further translational and commercialization pathways of clinically driven biosensor devices for AD are discussed and summarized.

Interaction between the functionalized probes: The depressed efficiency of dual-amplification strategy on ratiometric electrochemical aptasensor for aflatoxin B1

Signal amplification is one of the most effective ways to develop the high-performance electrochemical sensors. However, it can be more complicated for ratiometric detections. Herein, a ratiometric electrochemical aptasensor for aflatoxin B1 (AFB1) was proposed by taking advantage of a dual-amplification strategy by coupling of DNA walker (DW) with hybridization chain reaction (HCR). The special binding of AFB1 with ferrocene (Fc)-labelled aptamer triggers DW on hairpin DNA (hDNA) tracks to produce abundant double-stranded DNA (dsDNA). HCR-based strand amplification occurs on these dsDNA to absorb more methylene blue (MB). Then current ratio of MB (I_MB) and Fc (I_Fc) is designed as a yardstick to detect AFB1. Our experiments reveal that the interaction between Fc and MB (i.e., steric hindrance, electron mediator) varies. In addition to steric hindrance, the presence of MB also acts as electron mediator, thereby facilitating the electron transfer between Fc and electrode. Such combined effect consequently depresses the efficiency of dual-amplification strategy to improve the detection. The developed ratiometric electrochemical aptasensor allows the accurate detection of AFB1 in the 0.003-3 pg mL^-1 range. Our work has shed light on the amplification strategy for ratiometric sensing, and provided a new route in integrating different amplification strategies.

In situ creation of ZnO@CdS nanoflowers on ITO electrodes for sensitive photoelectrochemical detection of copper ions in blood

A highly selective and sensitive photoelectrochemical (PEC) detection method has been developed for the analysis of copper (Cu2+) ions using nanoflower-like ZnO@CdS heterojunctions, of which ZnO was first in situ grown onto the indium tin oxide electrodes by a hydrothermal method and then coated with CdS through the chemical bath deposition route. It was discovered that the ZnO@CdS heterojunction so formed could serve as a photosensitive catalyst with improved charge separation for visible-light-driven PEC responses. Enhanced visible-light harvesting of nanocomposites could also be expected with CdS as the visible-light sensitizer. Furthermore, the introduction of Cu2+ ions could cause a rational decrease in the photocurrents of nanocomposites through the specific interaction between CdS and Cu2+ ions. A ZnO@CdS heterojunction-based PEC sensor was thereby developed for the detection of Cu2+ ions in blood in the linear concentrations ranging from 0.50 to 80 nM, with a limit of detection of 0.18 nM. Such a heterojunction-based PEC detection platform constructed using two photocatalytic materials with matched band structures are promising for a wide range of applications for sensing Cu2+ ions in clinical diagnostics, food monitoring, and environmental analysis.