Aggregation-induced chemiluminescence system for sensitive detection of mercury ions

A remote-controlled portable workstation for highly sensitive and real-time chemiluminescent detection of cadmium

The prevention of pollution requires real-time monitoring of cadmium (Cd2+) concentration in the food, as it has a dramatic impact on poultry and can pose a threat to human health. Here, we fabricate a portable workstation integrating a microfluidic chip that facilitates real-time monitoring of Cd2+ levels in real samples by utilizing the Luminol-KMnO4 chemiluminescence (CL) system. Interestingly, Cd2+ can significantly enhance the CL signal, resulting in sensitive detection of Cd2+ in the range of 0-0.18 mg/L with the limit of detection (LOD) of 0.207 μg/L. Furthermore, a remote-controlled unit is integrated into the portable workstation to form a remote-controlled portable workstation (RCPW) performing automated point-of-care testing (POCT) of Cd2+. The as-prepared strategy allows remote control of RCPW to avoid long-distance transportation of samples to achieve real-time target monitoring. Consequently, this system furnishes RCPW for monitoring Cd2+ levels in real samples, thereby holding potential for applications in preventing food pollution.

o-phenylenediamine Derived Fluorescent Carbon Quantum dots for Detection of Hg(II) in Environmental Water

With the expansion of human activities, the consequent influx of mercury (Hg) into the food chain and the environment is seriously threatening human life. Herein, nitrogen and sulfur co-doped fluorescent carbon quantum dots (yCQDs) were prepared via a hydrothermal method using o-phenylenediamine (OPD) and taurine as precursors. The morphological characteristics as well as spectral features of yCQDs indicated that the photoluminescence mechanism should be the molecular state fluorophores of 2, 3-diaminophenothiazine (oxOPD), which is the oxide of OPD. The as-synthesized yCQDs exhibited sensitive recognition of Hg2+. According to the investigation in combination of UV-Vis absorption spectra, time-resolved fluorescence spectra and quantum chemical calculations, the abundant functional groups on the surface of yCQDs allowed Hg2+ to bind with yCQDs through various interactions, and the formed complexes significantly inhibited the absorption of excitation light, resulting in the static fluorescence quenching of yCQDs. The proposed yCQDs was utilized for Hg2+ sensing with the limit of detection calculated to be 4.50 × 10- 8 M. Furthermore, the recognition ability of yCQDs for Hg2+ was estimated in tap water, lake water and bottled water, and the results indicated that yCQDs have potential applications in monitoring Hg2+.

Aggregation-Induced Emission-Based Chemiluminescence Systems in Biochemical Analysis and Disease Theranostics

Chemiluminescence (CL) is of great significance in biochemical analysis and imaging due to its high sensitivity and lack of need for external excitation. In this review, we summarized the recent progress of AIE-based CL systems, including their working mechanisms and applications in biochemical analysis, bioimaging, and disease diagnosis and treatment. In ion and molecular detection, CL shows high selectivity and high sensitivity, especially in the detection of dynamic reactive oxygen species (ROS). Further, the integrated NIR-CL single-molecule system and nanostructural CL platform harnessing CL resonance energy transfer (CRET) have remarkable advantages in long-term imaging with superior capability in penetrating deep tissue depth and high signal-to-noise ratio, and are promising in the applications of in vivo imaging and image-guided disease therapy. Finally, we summarized the shortcomings of the existing AIE-CL system and provided our perspective on the possible ways to develop more powerful CL systems in the future. It can be highly expected that these promoted CL systems will play bigger roles in biochemical analysis and disease theranostics.

A specific visual-volumetric sensor for mercury ions based on smart hydrogel

On the basis of the "seeing is believing" concept and the existing theory of Hg2+ coordination chemistry, for the first time, we innovatively designed and synthesized a visual-volumetric sensor platform with fluorescein and uracil functionalized polyacrylamide hydrogel. Without the aid of any complicated instruments and power sources, the sensor-enabled quantitative μM-level Hg2+ detection Hg2+ by reading graduation on a pipette with the naked eye. The sensor undergoes volumetric response and shows a wide linear response range to Hg2+ (1.0 × 10-6-5.0 × 10-5 mol L-1) with 2.8 × 10-7 mol L-1 as the detection limit. The highly selective (easily distinguished Hg2+ from other common metal ions), rapid response (∼30 min), and acceptable repeatability (RSD < 5% in all cases) demonstrated that the developed sensor is suitable for onsite practical use for the determination of Hg2+ while being low-cost, simple, and portable. The design principles of the obtained materials and the construction techniques and methods of the sensors described in our study provide a new idea for the research and development of smart materials and a series of visual-volumetric sensors for other analytes.

In situ microwave-assisted preparation of NS-codoped carbon dots stabilized silver nanoparticles as an off-on fluorescent probe for trace Hg2+ detection

An off-on fluorescent probe (NS-CDs-AgNPs) was synthesized based on a one-pot microwave process by utilizing N, S co-doping carbon dots (NS-CDs) and silver nitrate as precursors. The significant peak of NS-CDs-AgNPs at 393 nm in ultraviolet spectrum indicated silver nanoparticle (AgNPs) were successfully synthesized. A faint blue fluorescence emission (442 nm) was displayed when excited NS-CDs-AgNPs at 371 nm. A remarkable fluorescence recovery was observed upon adding of trance Hg2+, whereas the other heavy metal ions did not elicit this response. The reason for this phenomenon was revealed in this work that a spontaneous redox reaction occurred between NS-CDs-AgNPs and Hg2+, which leaded to the formation of NS-CDs-Agn-2NPsHg complexes. On the basis of this mechanism, a new off-on fluorescent analytical method was constructed for Hg2+ detection with linear range of 10-400 nM (R2 = 0.9941), and the detection limit (LOD) of 5.16 nM. Additionally, satisfactory recovery (90.28%-106.13%) and the relative standard deviation (RSD) (RSD＜5.21%) were obtained in water sample detection. More importantly, the NS-CDs-AgNPs exhibited lower cytotoxicity and better biocompatibility, indicating a huge potential in cell imaging and clinical medicine.

Smartphone-Enabled Fluorescence and Colorimetric Platform for the On-Site Detection of Hg2+ and Cl- Based on the Au/Cu/Ti3C2 Nanosheets

Smartphone-assisted fluorescence and colorimetric methods for the on-site detection of Hg²⁺ and Cl^- were established based on the oxidase-like activity of the Au-Hg alloy on the surface of Au/Cu/Ti₃C₂ NSs. The Au nanoparticles (NPs) were constructed via in-situ growth on the surface of Cu/Ti₃C₂ NSs and characterized by different characterization techniques. After the addition of Hg²⁺, the formation of Hg-Au alloys could promote the oxidization of o-phenylenediamine (OPD) to generate a new fluorescence emission peak of 2,3-diaminopenazine (ADP) at 570 nm. Therefore, a turn-on fluorescence method for the detection of Hg²⁺ was established. As the addition of Cl^- can influence the fluorescence of ADP, the fluorescence intensity was constantly quenched to achieve the continuous quantitative detection of Cl^-. Therefore, a turn-off fluorescence method for the detection of Cl^- was established. This method had good linear ranges for the detection of Hg²⁺ and Cl^- in 8.0-200.0 nM and 5.0-350.0 µM, with a detection limit of 0.8 nM and 27 nM, respectively. Depending on the color change with the detection of Hg²⁺ and Cl^-, a convenient on-site colorimetric method for an analysis of Hg²⁺ and Cl^- was achieved by using digital images combined with smartphones (color recognizers). The digital picture sensor could analyze RGB values in concentrations of Hg²⁺ or Cl^- via a smartphone app. In summary, the proposed Au/Cu/Ti₃C₂ NSs-based method provided a novel and more comprehensive application for environmental monitoring.

Tetrakis(4-pyridylphenyl)ethylene-based Zinc Metal-Organic Framework with Aggregation-Induced Chemiluminescence Emission on a Paper Platform for Formaldehyde Detection in Breath

Volatile formaldehyde (FA) in exhaled breath (EB) is considered as a biomarker for lung cancer (LC). On-the-spot selective and sensitive detection of gaseous FA is rather important for LC screening and diagnosis. Herein, a tetrakis(4-pyridylphenyl)ethylene (Py-TPE)-based zinc metal-organic framework (MOF) with excellent aggregation-induced emission (AIE) property was utilized for absorption and selective detection of FA in EB. The porous Zn-Py-TPE served as a gaseous confinement cavity for the adsorption of FA in EB. Interestingly, Zn-Py-TPE was aggregated on paper, and then aggregation-induced chemiluminescence (CL) emission can be triggered by only adding bis(2,4,6-trichlorophenyl)oxalate (TCPO). Though without H₂O₂, the CL of Zn-Py-TPE-TCPO was enhanced greatly by FA. FA promoted the aggregation of Zn-Py-TPE on paper by forming halogen bonding between FA and Zn-Py-TPE, which contributed to the better selectivity. FA can also stimulate the production of more singlet oxygen (¹O₂) in the Zn-Py-TPE-TCPO CL system. Hence, FA could be detected via the proposed Zn-Py-TPE-TCPO system with a quantification linear range of 1.0-100.0 ppb and detection limit of 0.3 ppb. This portable, low-cost, and sensitive paper-based platform can achieve trace FA detection in EB and is expected to provide an on-the-spot screening platform for lung cancer.

AIEE compounds based on 9, 10-dithienylanthracene-substituted triphenylamine: design, synthesis, and applications in cell imaging

Four new 9, 10-dithienylanthracene-based triphenylamine derivatives (TPA-DTAs) were designed and synthesized by adjusting the linkage model of phenylacetonitrile group with different substituents. They all displayed aggregation-induced emission enhancement (AIEE) features...

Aggregation-Induced Emission Effect within Peroxyoxalate-Loaded Mesoporous Silica Nanoparticles for Efficient Harvest of Chemiluminescence Energy in Aqueous Solutions

Aggregation-induced emission (AIE) molecules that can avoid the aggregation-caused quenching (ACQ) effect and break the concentration limit have been widely used for biosensing. Similar to fluorescence dyes, AIE molecules can be chemiexcited simply by a peroxyoxalate-based chemiluminescence (CL) reaction, but the hydrolysis of peroxyoxalate is often a problem in an aqueous solution. Herein, we report an AIE effect within peroxyoxalate-loaded silica nanoparticles (PMSNs) for an efficient harvest of CL energy as well as alleviation of bis(2,4,5-trichloro-6-carbopentoxyphenyl) oxalate (CPPO) hydrolysis. Peroxyoxalate (i.e., CPPO) and AIE molecules (i.e., 1,2-benzothiazol-2-triphenylamino acrylonitrile, BTPA) were loaded together within the mesoporous silica nanoparticles (MSNs) to synthesize the BTPA-PMSN nanocomposite. The BTPA-PMSNs not only allowed CPPO to be dispersed well in an aqueous solution but also avoided the hydrolysis of CPPO. Meanwhile, the proximity between BTPA and CPPO molecules in the mesopores of MSNs facilitated the BTPA aggregate to harvest the energy from CL intermediates. Hence, the CL system of BTPA-PMSNs can work efficiently in aqueous solutions at a physiological pH. The CL quantum yield of the BTPA-PMSN system was measured to be 9.91 × 10^-5, about 20 000-fold higher than that obtained in the rhodamine B (RhB, a typical ACQ dye)-PMSN system. Using BTPA-PMSNs for H₂O₂ sensing, a limit of detection (LOD) as low as 5 nM can be achieved, 1000-fold lower than that achieved in the RhB-PMSNs system. Due to the feasibility of working at a physiological pH, this CL system is also quite suitable for the detection of oxidase substrates such as glucose and cholesterol. This BTPA-PMSN CL system with the merits of high CL quantum yield at a physiological pH is appealing for biosensing.