Analysis of single-cell differences by use of an on-chip microculture system and optical trapping

Spectral tweezers: Single sample spectroscopy using optoelectronic tweezers

A scheme that combines optoelectronic tweezers (OET) with spectroscopic analysis is presented. Referred to as spectral tweezers, the approach uses a single focused light beam that acts both as the trapping beam for OET and the probe beam for spectroscopy. Having simultaneous manipulation and spectral characterization ability, the method is used to isolate single micro-samples from clusters and perform spectral measurements. Experimental results show that a characteristic spectral signature can be obtained for a given sample. The proposed approach can be easily integrated into the optical setups used for conventional OETs with only a few additional optical components, making it a convenient tool for bio-analytical applications.

Biophysics at Waseda University

Biophysics in Waseda University was started in 1965 as one of the three key research areas that constitute the Physics Department. In the biophysics group, one theoretical lab and two experimental labs are now working on the cutting-edge themes on biophysics, disseminating the ideas and knowledge of biophysics to undergraduate and graduate students from the viewpoint of physics.

Label-free differentiation of human immunodeficiency virus-1 infected from uninfected cells using transmission measurement

Transmission measurement has been perceived as a potential candidate for label-free investigation of biological material. It is a real-time, label-free and non-invasive optical detection technique that has found wide applications in pharmaceutical industry as well as the biological and medical fields. Combining transmission measurement with optical trapping has emerged as a powerful tool allowing stable sample trapping, while also facilitating transmittance data analysis. In this study, a near-infrared laser beam emitting at a wavelength of 1064 nm was used for both optical trapping and transmission measurement investigation of human immunodeficiency virus 1 (HIV-1) infected and uninfected TZM-bl cells. The measurements of the transmittance intensity of individual cells in solution were carried out using a home built optical trapping system combined with laser transmission setup using a single beam gradient trap. Transmittance spectral intensity patterns revealed significant differences between the HIV-1 infected and uninfected cells. This result suggests that the transmittance data analysis technique used in this study has the potential to differentiate between infected and uninfected TZM-bl cells without the use of labels. The results obtained in this study could pave a way into developing an HIV-1 label-free diagnostic tool with possible applications at the point of care .

Multiplexing microelectrodes for dielectrophoretic manipulation and electrical impedance measurement of single particles and cells in a microfluidic device

This work presents a microfluidic device, which was patterned with (i) microstructures for hydrodynamic capture of single particles and cells, and (ii) multiplexing microelectrodes for selective release via negative dielectrophoretic (nDEP) forces and electrical impedance measurements of immobilized samples. Computational fluid dynamics (CFD) simulations were performed to investigate the fluidic profiles within the microchannels during the hydrodynamic capture of particles and evaluate the performance of single-cell immobilization. Results showed uniform distributions of velocities and pressure differences across all eight trapping sites. The hydrodynamic net force and the nDEP force acting on a 6 μm sphere were calculated in a 3D model. Polystyrene beads with difference diameters (6, 8, and 10 μm) and budding yeast cells were employed to verify multiple functions of the microfluidic device, including reliable capture and selective nDEP-release of particles or cells and sensitive electrical impedance measurements of immobilized samples. The size of immobilized beads and the number of captured yeast cells can be discriminated by analyzing impedance signals at 1 MHz. Results also demonstrated that yeast cells can be immobilized at single-cell resolution by combining the hydrodynamic capture with impedance measurements and nDEP-release of unwanted samples. Therefore, the microfluidic device integrated with multiplexing microelectrodes potentially offers a versatile, reliable, and precise platform for single-cell analysis.

A microfluidic cell-trapping device to study dynamic host-microbe interactions at the single-cell level

Single-cell imaging of host-microbe interactions over time is impeded by cellular motility because the cells under scrutiny tend to migrate out of the imaging field. To overcome this technical challenge, we developed a microfluidic platform for imaging hundreds of individual motile phagocytic cells and bacteria within microfluidic traps that restrict their movement. The interaction of trapped host cells and bacteria is monitored by long-term time-lapse microscopy, allowing direct visualization of all stages of infection at the single-cell level. The medium flowing through the microfluidic device can be changed quickly and precisely, permitting the real-time imaging of cellular responses to antibiotics or other environmental stresses. Here, we demonstrate the potential applications of this approach by co-culturing the phagocytic amoeba Dictyostelium discoideum with the intracellular pathogen Mycobacterium marinum. However, the platform can be adapted easily for use with other host cells or microorganisms. This approach will provide new insights into host-pathogen interactions that cannot be studied using conventional population-based assays.

Particle Manipulation by Optical Forces in Microfluidic Devices

Since the pioneering work of Ashkin and coworkers, back in 1970, optical manipulation gained an increasing interest among the scientific community. Indeed, the advantages and the possibilities of this technique are unsubtle, allowing for the manipulation of small particles with a broad spectrum of dimensions (nanometers to micrometers size), with no physical contact and without affecting the sample viability. Thus, optical manipulation rapidly found a large set of applications in different fields, such as cell biology, biophysics, and genetics. Moreover, large benefits followed the combination of optical manipulation and microfluidic channels, adding to optical manipulation the advantages of microfluidics, such as a continuous sample replacement and therefore high throughput and automatic sample processing. In this work, we will discuss the state of the art of these optofluidic devices, where optical manipulation is used in combination with microfluidic devices. We will distinguish on the optical method implemented and three main categories will be presented and explored: (i) a single highly focused beam used to manipulate the sample, (ii) one or more diverging beams imping on the sample, or (iii) evanescent wave based manipulation.

A microfluidic cell-trapping device for single-cell tracking of host-microbe interactions

The impact of cellular individuality on host-microbe interactions is increasingly appreciated but studying the temporal dynamics of single-cell behavior in this context remains technically challenging. Here we present a microfluidic platform, InfectChip, to trap motile infected cells for high-resolution time-lapse microscopy. This approach allows the direct visualization of all stages of infection, from bacterial uptake to death of the bacterium or host cell, over extended periods of time. We demonstrate the utility of this approach by co-culturing an established host-cell model, Dictyostelium discoideum, with the extracellular pathogen Klebsiella pneumoniae or the intracellular pathogen Mycobacterium marinum. We show that the outcome of such infections is surprisingly heterogeneous, ranging from abortive infection to death of the bacterium or host cell. InfectChip thus provides a simple method to dissect the time-course of host-microbe interactions at the single-cell level, yielding new insights that could not be gleaned from conventional population-based measurements.

On-chip cellomics: Single-cell-based constructive cell-network assay for quasi-in vivo screening of cardiotoxicity

We have developed methods and systems of analyzing epigenetic information in cells, as well as that of genetic information, to expand our understanding of how living systems are determined. A system of analyzing epigenetic information was developed starting from the twin complementary viewpoints of cell regulation as an 'algebraic' system (emphasis on temporal aspects) and as a 'geometric' system (emphasis on spatial aspects). As an example of the 'geometric' system, we have developed an quasi-in vivo hiPS cardiomyocyte network assay and confirmed that it can predict the risk of lethal arrythmia correctly in 22 compounds. The knowlege acquired from this study may lead to the use of cells that fully control practical applications like cell-based drug screening and the regeneration of organs.

On-chip cellomics assay enabling algebraic and geometric understanding of epigenetic information in cellular networks of living systems. 1. Temporal aspects of epigenetic information in bacteria

A series of studies aimed at developing methods and systems of analyzing epigenetic information in cells and in cell networks, as well as that of genetic information, was examined to expand our understanding of how living systems are determined. Because cells are minimum units reflecting epigenetic information, which is considered to map the history of a parallel-processing recurrent network of biochemical reactions, their behaviors cannot be explained by considering only conventional DNA information-processing events. The role of epigenetic information on cells, which complements their genetic information, was inferred by comparing predictions from genetic information with cell behaviour observed under conditions chosen to reveal adaptation processes, population effects and community effects. A system of analyzing epigenetic information was developed starting from the twin complementary viewpoints of cell regulation as an “algebraic” system (emphasis on temporal aspects) and as a “geometric” system (emphasis on spatial aspects). Exploiting the combination of latest microfabrication technology and measurement technologies, which we call on-chip cellomics assay, we can control and re-construct the environments and interaction of cells from “algebraic” and “geometric” viewpoints. In this review, temporal viewpoint of epigenetic information, a part of the series of single-cell-based “algebraic” and “geometric” studies of celluler systems in our research groups, are summerized and reported. The knowlege acquired from this study may lead to the use of cells that fully control practical applications like cell-based drug screening and the regeneration of organs.

Optimal lineage principle for age-structured populations

We present a formulation of branching and aging processes that allows age distributions along lineages to be studied within populations, and provides a new interpretation of classical results in the theory of aging. We establish a variational principle for the stable age distribution along lineages. Using this optimal lineage principle, we show that the response of a population's growth rate to age-specific changes in mortality and fecundity--a key quantity that was first calculated by Hamilton--is given directly by the age distribution along lineages. We apply our method also to the Bellman-Harris process, in which both mother and progeny are rejuvenated at each reproduction event, and show that this process can be mapped to the classic aging process such that age statistics in the population and along lineages are identical. Our approach provides both a theoretical framework for understanding the statistics of aging in a population, and a new method of analytical calculations for populations with age structure. We discuss generalizations for populations with multiple phenotypes, and more complex aging processes. We also provide a first experimental test of our theory applied to bacterial populations growing in a microfluidics device.

Contact printing of arrayed microstructures

A novel contact printing method utilizing a sacrificial layer of polyacrylic acid (PAA) was developed to selectively modify the upper surfaces of arrayed microstructures. The method was characterized by printing polystyrene onto SU-8 microstructures to create an improved substrate for a cell-based microarray platform. Experiments measuring cell growth on SU-8 arrays modified with polystyrene and fibronectin demonstrated improved growth of NIH 3T3 (93% vs. 38%), HeLa (97% vs. 77%), and HT1080 (76% vs. 20%) cells relative to that for the previously used coating method. In addition, use of the PAA sacrificial layer permitted the printing of functionalized polystyrene, carboxylate polystyrene nanospheres, and silica nanospheres onto the arrays in a facile manner. Finally, a high concentration of extracellular matrix materials (ECM), such as collagen (5 mg/mL) and gelatin (0.1%), was contact-printed onto the array structures using as little as 5 microL of the ECM reagent and without the formation of a continuous film bridge across the microstructures. Murine embryonic stem cells cultured on arrays printed with this gelatin hydrogel remained in an undifferentiated state indicating an adequate surface gelatin layer to maintain these cells over time.

A cell chip for sequential imaging of individual non-adherent live cells reveals transients and oscillations

Advances in molecular cell biology, medical research, and drug development are driving a growing need for technologies that enable imaging the dynamics of molecular and physiological processes simultaneously in numerous non-adherent living cells. Here we describe a platform technology and software--the CKChip system--that enables continuous, fluorescence-based imaging of thousands of individual living cells, each held at a given position ("address") on the chip. The system allows for sequential monitoring, manipulation and kinetic analyses of the effects of drugs, biological response modifiers and gene expression in both adherent and non-adherent cells held on the chip. Here we present four specific applications that demonstrate the utility of the system including monitoring kinetics of reactive oxygen species generation, assessing the intracellular enzymatic activity, measuring calcium flux and the dynamics of target cell killing induced by conjugated cytotoxic T-lymphocytes. We found large variations among individual cells in the overall amplitude of their response to stimuli, as well as in kinetic parameters such as time of onset, initial rate and decay of the response, and frequency and amplitude of oscillations. These variations probably reflect the heterogeneity of even cloned cell populations that would have gone undetected in bulk cell measurements. We demonstrate the utility of the system in providing kinetic parameters of complex cellular processes such as Ca++ influx, transients and oscillations in numerous individual cells. The CKChip opens up new opportunities in cell-based research, in particular for acquiring fluorescence-based, kinetic data from multiple, individual non-adherent cells.

Monodisperse semi-permeable microcapsules for continuous observation of cells

We present a method for forming monodisperse semi-permeable microcapsules composed of an alginate-poly-L-lysine (PLL) membrane for the observation of encapsulated cells. These microcapsules were prepared with a monolithic three-dimensional microfluidic axisymmetric flow-focusing device by an internal gelation method using glucono-1,5-lactone in order to provide mild conditions for the cells. The microcapsules were sufficiently monodisperse and robust to be trapped in a bead-based microfluidic array system for easy observation. We also confirmed that (i) the alginate-PLL membrane is semi-permeable so that cells and microorganisms cannot pass through it but nutrients and wastes can, (ii) cells are able to move freely inside the semi-permeable microcapsules, and (iii) cells can be successfully proliferated in the microcapsules.

Using movies to analyse gene circuit dynamics in single cells

Many bacterial systems rely on dynamic genetic circuits to control crucial biological processes. A major goal of systems biology is to understand these behaviours in terms of individual genes and their interactions. However, traditional techniques based on population averages 'wash out' crucial dynamics that are either unsynchronized between cells or are driven by fluctuations, or 'noise', in cellular components. Recently, the combination of time-lapse microscopy, quantitative image analysis and fluorescent protein reporters has enabled direct observation of multiple cellular components over time in individual cells. In conjunction with mathematical modelling, these techniques are now providing powerful insights into genetic circuit behaviour in diverse microbial systems.

BioMEMS -Advancing the Frontiers of Medicine

Biological and medical application of micro-electro-mechanical-systems (MEMS) is currently seen as an area of high potential impact. Integration of biology and microtechnology has resulted in the development of a number of platforms for improving biomedical and pharmaceutical technologies. This review provides a general overview of the applications and the opportunities presented by MEMS in medicine by classifying these platforms according to their applications in the medical field.

Optical tweezers for single cells

Optical tweezers (OT) have emerged as an essential tool for manipulating single biological cells and performing sophisticated biophysical/biomechanical characterizations. Distinct advantages of using tweezers for these characterizations include non-contact force for cell manipulation, force resolution as accurate as 100aN and amiability to liquid medium environments. Their wide range of applications, such as transporting foreign materials into single cells, delivering cells to specific locations and sorting cells in microfluidic systems, are reviewed in this article. Recent developments of OT for nanomechanical characterization of various biological cells are discussed in terms of both their theoretical and experimental advancements. The future trends of employing OT in single cells, especially in stem cell delivery, tissue engineering and regenerative medicine, are prospected. More importantly, current limitations and future challenges of OT for these new paradigms are also highlighted in this review.

New model for assembly dynamics of bacterial tubulin in relation to the stages of DNA replication

How living cells receive their genome through cell division has been one of the important questions of biology. In prokaryotes, cell division starts with formation of a ring-shaped microtubule-like structure, FtsZ-ring, at the potential division site. All the previous models suggested that FtsZ-ring is formed coupling to termination or far after initiation of DNA replication. In contrast, we demonstrated that a close communication with DNA replication is maintained throughout the cell cycle. FtsZ starts to assemble to the cell center coupling to initiation of DNA replication, and stabilizes as FtsZ-ring at its termination, but does not constrict before separation of nucleoids. This combination of a positive and a negative control would guarantee that a successful replication event would inevitably induce one cell division such that each of the daughter cells would receive one and only one daughter nucleoid.

Photoresist with low fluorescence for bioanalytical applications

The negative photoresist SU-8 has found widespread use as a material in the fabrication of microelectrical-mechanical systems (MEMS). Although SU-8 has been utilized as a structural material for biological MEMS, a number of SU-8 properties limit its application in these bioanalytical devices. These attributes include its brittleness, nonspecific adsorption of biomolecules, and high fluorescence in the visible wavelengths. In addition, native SU-8 is a poor substrate for cellular adhesion. Photoresists composed of resins with epoxide side groups and photoacids were screened for their ability to serve as a low-fluorescence photoresist with sufficient resolution to generate microstructures with dimensions of 5-10 microm. The fluorescence of structures formed from 1002F photoresist (1002F resin combined with triarylsulfonium hexafluoroantimonate salts) was as much as 10 times less fluorescent than similar SU-8 microstructures. The absorbance of 1002F in the visible wavelengths was also substantially lower than that of SU-8. Microstructures or pallets with an aspect ratio as high as 4:1 could be formed permitting 1002F to be used as a structural material in the fabrication of arrays of pallets for sorting adherent cells. Several different cell types were able to adhere to native 1002F surfaces, and the viability of these cells was excellent. As with SU-8, 1002F has a weak adhesion to glass, a favorable attribute when the pallet arrays are used to sort adherent cells. A threshold, laser pulse energy of 3.5 microJ was required to release individual 50 microm, 1002F pallets from an array. Relative to SU-8, 1002F photoresist offers substantial improvements as a substrate in bioanalytical devices and is likely to find widespread use in BioMEMS.

Origin of individuality of two daughter cells during the division process examined by the simultaneous measurement of growth and swimming property using an on-chip single-cell cultivation system

We examined the origin of individuality of two daughter cells born from an isolated single Escherichia coli mother cell during its cell division process by monitoring the change in its swimming behavior and tumbling frequency using an on-chip single-cell cultivation system. By keeping the isolated condition of an observed single cell, we compared its growth and swimming property within a generation and over up to seven generations. It revealed that running speed decreased as cell length smoothly increased within each generation, whereas tumbling frequency fluctuated among generations. Also found was an extraordinary tumbling mode characterized by the prolonged duration of pausing in predivisional cells after cell constriction. The observed prolonged pausing may imply the coexistence of two distinct control systems in a predivisional cell, indicating that individuality of daughter cells emerges after a mother cell initiates constriction and before it gets physically separated into two new cell bodies.

Quantitative measurement of damage caused by 1064-nm wavelength optical trapping of Escherichia coli cells using on-chip single cell cultivation system

We quantitatively examined the possible damage to the growth and cell division ability of Escherichia coli caused by 1064-nm optical trapping. Using the synchronous behavior of two sister E. coli cells, the growth and interdivision times between those two cells, one of which was trapped by optical tweezers, the other was not irradiated, were compared using an on-chip single cell cultivation system. Cell growth stopped during the optical trapping period, even with the smallest irradiated power on the trapped cells. Moreover, the damage to the cell's growth and interdivision period was proportional to the total irradiated energy (work) on the cell, i.e., irradiation time multiplied by irradiation power. The division ability was more easily affected by a smaller energy, 0.36 J, which was 30% smaller than the energy that adversely affected growth, 0.54 J. The results indicate that the damage caused by optical trapping can be estimated from the total energy applied to cells, and furthermore, that the use of optical trapping for manipulating cells might cause damage to cell division and growth mechanisms, even at wavelengths under 1064 nm, if the total irradiation energy is excessive.

Quantitative evaluation of cell-to-cell communication effects in cell group class using on-chip individual-cell-based cultivation system

Cell-to-cell communication is considered to underlie the coordinated behavior and the multicellularity of cell group class, which cannot be explained only by the knowledge of lower class of life system from molecule to individual cell, because they are determined by at least two different ways: diffusible chemical signals and their direct physical contacts. We show in this paper a new method of individual-cell-based cell observation that can estimate the role of cell-to-cell communication, diffusible chemical signals, and physical contacts as separated properties, by applying an on-chip individual-cell-based cultivation system. The exchange of stationary phase medium on isolated individual Escherichia coli from exponential phase medium and the control of physical contacts indicated that the cell-to-cell direct contact did not affect the growth rate; only the communication through diffusible signals affects the growth rates as Hill's equation manner.

Phagocytic response to fully controlled plural stimulation of antigens on macrophage using on-chip microcultivation system

To understand the control mechanism of innate immune response in macrophages, a series of phagocytic responses to plural stimulation of antigens on identical cells was observed. Two zymosan particles, which were used as antigens, were put on different surfaces of a macrophage using optical tweezers in an on-chip single-cell cultivation system, which maintains isolated conditions of each macrophage during their cultivation. When the two zymosan particles were attached to the macrophage simultaneously, the macrophage responded and phagocytosed both of the antigens simultaneously. In contrast, when the second antigen was attached to the surface after the first phagocytosis had started, the macrophage did not respond to the second stimulation during the first phagocytosis; the second phagocytosis started only after the first process had finished. These results indicate that (i) phagocytosis in a macrophage is not an independent process when there are plural stimulations; (ii) the response of the macrophage to the second stimulation is related to the time" delay from the first stimulation. Stimulations that occur at short time intervals resulted in simultaneous phagocytosis, while a second stimulation that is delayed long enough might be neglected until the completion of the first phagocytic process.

Optical trapping of a spherically symmetric sphere in the ray-optics regime: a model for optical tweezers upon cells

Since their invention in 1986, optical tweezers have become a popular manipulation and force measurement tool in cellular and molecular biology. However, until recently there has not been a sophisticated model for optical tweezers on trapping cells in the ray-optics regime. We present a model for optical tweezers to calculate the optical force upon a spherically symmetric multilayer sphere representing a common biological cell. A numerical simulation of this model shows that not only is the magnitude of the optical force upon a Chinese hamster ovary cell significantly three times smaller than that upon a polystyrene bead of the same size, but the distribution of the optical force upon a cell is also much different from that upon a uniform particle, and there is a 30% difference in the optical trapping stiffness of these two cases. Furthermore, under a small variant condition for the refractive indices of any adjacent layers of the sphere, this model provides a simple approximation to calculate the optical force and the stiffness of an optical tweezers system.

Transparent polymeric cell culture chip with integrated temperature control and uniform media perfusion

Modern microfabrication and microfluidic technologies offer new opportunities in the design and fabrication of miniaturized cell culture systems for online monitoring of living cells. We used laser micromachining and thermal bonding to fabricate an optically transparent, low-cost polymeric chip for long-term online cell culture observation under controlled conditions. The chip incorporated a microfluidic flow equalization system, assuring uniform perfusion of the cell culture media throughout the cell culture chamber. The integrated indium-tin-oxide heater and miniature temperature probe linked to an electronic feedback system created steady and spatially uniform thermal conditions with minimal interference to the optical transparency of the chip. The fluidic and thermal performance of the chip was verified by finite element modeling and by operation tests under fluctuating ambient temperature conditions. HeLa cells were cultured for up to 2 weeks within the cell culture chip and monitored using a time-lapse video recording microscopy setup. Cell attachment and spreading was observed during the first 10-20 h (lag phase). After approximately 20 h, cell growth gained exponential character with an estimated doubling time of about 32 h, which is identical to the observed doubling time of cells grown in standard cell culture flasks in a CO2 incubator.

Simple photografting method to chemically modify and micropattern the surface of SU-8 photoresist

SU-8 has gained widespread acceptance as a negative photoresist. It is also finding increasing use as a structural material in microanalytical devices. Consequently, methods to tailor the surface properties of SU-8 as well as to micropattern coatings on the surface of SU-8 are needed. The SU-8 photoresist consists of EPON SU-8 resin mixed with the photoacid generator triarylsulfonium hexafluoroantimonate. This photoacid generator can also serve as a photoinitiator generating free radicals when illuminated with UV light. Under the appropriate conditions, sufficient triarylsulfonium hexafluoroantimonate remains within cured SU-8 to act as a source of free radicals and initiate UV-mediated grafting of polymers onto the surface of the SU-8. UV-mediated grafting was used to coat SU-8 surfaces with poly(acrylic acid) and other water-soluble monomers. The SU-8 surface was chemically micropatterned by placing a mask between the UV light and SU-8. The X-Y spatial resolution of micropatterned poly(acrylic acid) on the SU-8 surface was 2 mum. Three applications of these chemically modified SU-8 surfaces were demonstrated. In the first, poly(ethylene glycol) was used to protect the SU-8 from interactions with proteins, yielding a surface resistant to biofouling. In the second demonstration, the SU-8 surface was micropatterned with a cell-resistant layer to guide cellular attachment and growth. In the final application, SU-8 micropallets were encoded with polymer lines. The bar codes were read by either absorbance or fluorescence measurements. Thus, UV-mediated graft polymerization is an efficient and effective method to micropattern coatings onto the surface of SU-8.

Microfabricated platform for studying stem cell fates

Platforms that allow parallel, quantitative analysis of single cells will be integral to realizing the potential of postgenomic biology. In stem cell biology, the study of clonal stem cells in multiwell formats is currently both inefficient and time-consuming. Thus, to investigate low-frequency events of interest, large sample sizes must be interrogated. We report a simple, versatile, and efficient micropatterned arraying system conducive to the culture and dynamic monitoring of stem cell proliferation. This platform enables: 1) parallel, automated, long-term ( approximately days to weeks), live-cell microscopy of single cells in culture; 2) tracking of individual cell fates over time (proliferation, apoptosis); and 3) correlation of differentiated progeny with founder clones. To achieve these goals, we used microfabrication techniques to create an array of approximately 10,000 microwells on a glass coverslip. The dimensions of the wells are tunable, ranging from 20 to >500 microm in diameter and 10-500 microm in height. The microarray can be coated with adhesive proteins and is integrated into a culture chamber that permits rapid (approximately min), addressable monitoring of each well using a standard programmable microscope stage. All cells share the same media (including paracrine survival signals), as opposed to cells in multiwell formats. The incorporation of a coverslip as a substrate also renders the platform compatible with conventional, high-magnification light and fluorescent microscopy. We validated this approach by analyzing the proliferation dynamics of a heterogeneous adult rat neural stem cell population. Using this platform, one can further interrogate the response of distinct stem cell subpopulations to microenvironmental cues (mitogens, cell-cell interactions, and cell-extracellular matrix interactions) that govern their behavior. In the future, the platform may also be adapted for the study of other cell types by tailoring the surface coatings, microwell dimensions, and culture environment, thereby enabling parallel investigation of many distinct cellular responses.

Single-cell growth and division dynamics showing epigenetic correlations

The emergence of variation and subsequent inheritance of the emergent characteristics in a clonal population of bacteria is considered as evidence for epigenetic processes in the cell. We report here the results of experiments in which we quantitatively examined variations in single Escherichia coli cells with an identical genetic endowment in order to establish whether certain characteristics of single cells were inherited by their descendants maintained in a uniform environment. Significantly large variations of interdivision time, initial length, and final length were observed from generation to generation. Comparing the generations shows that interdivision time had no correlation with that of the consecutive generations, whereas those of initial length and final length were positively correlated with those of neighbouring generations.

Biotechnology approach to determination of genetic and epigenetic control in cells

A series of studies aimed at developing methods and systems for analyzing epigenetic information in cells are presented. The role of the epigenetic information of cells, which is complementary to their genetic information, was inferred by comparing the predictions of genetic information with the cell behaviour observed under conditions chosen to reveal adaptation processes and community effects. Analysis of epigenetic information was developed starting from the twin complementary viewpoints of cells regulation as an 'algebraic' system (emphasis on the temporal aspect) and as a 'geometric' system (emphasis on the spatial aspect). The knowlege acquired from this study will lead to the use of cells for fully controlled practical applications like cell-based drug screening and the regeneration of organs.

Microtechnologies and nanotechnologies for single-cell analysis

Many efforts are currently underway to try and mimic the properties of single cells with the aim of designing chips that are as efficient as cells. However, cells are nature's nanotechnology engineering at the scale of atoms and molecules, and it might be better to envision a microchip that utilizes a single cell as an experimentation platform. A novel, so-called laboratory-in-a-cell concept has been described, where advantage is taken of micro- and nanotechnological tools to enable precise control of the biochemical cellular environment; these tools also offer the possibility to analyse the composition of single cells. Methods for single-cell handling and analysis are being developed and will be required for this concept to progress further.

Single-cell microbiology: tools, technologies, and applications

The field of microbiology has traditionally been concerned with and focused on studies at the population level. Information on how cells respond to their environment, interact with each other, or undergo complex processes such as cellular differentiation or gene expression has been obtained mostly by inference from population-level data. Individual microorganisms, even those in supposedly "clonal" populations, may differ widely from each other in terms of their genetic composition, physiology, biochemistry, or behavior. This genetic and phenotypic heterogeneity has important practical consequences for a number of human interests, including antibiotic or biocide resistance, the productivity and stability of industrial fermentations, the efficacy of food preservatives, and the potential of pathogens to cause disease. New appreciation of the importance of cellular heterogeneity, coupled with recent advances in technology, has driven the development of new tools and techniques for the study of individual microbial cells. Because observations made at the single-cell level are not subject to the "averaging" effects characteristic of bulk-phase, population-level methods, they offer the unique capacity to observe discrete microbiological phenomena unavailable using traditional approaches. As a result, scientists have been able to characterize microorganisms, their activities, and their interactions at unprecedented levels of detail.

Observing growth and division of large numbers of individual bacteria by image analysis

We describe a method that enabled us to observe large numbers of individual bacterial cells during a long period of cell growth and proliferation. We designed a flow chamber in which the cells attached to a transparent solid surface. The flow chamber was mounted on a microscope equipped with a digital camera. The shear force of the flow removed the daughter cells, making it possible to monitor the consecutive divisions of a single cell. In this way, kinetic parameters and their distributions, as well as some physiological characteristics of the bacteria, could be analyzed based on more than 1,000 single-cell observations. The method which we developed enabled us to study the history effect on the distribution of the lag times of single cells.

Simultaneous measurement of sensor-protein dynamics and motility of a single cell by on-chip microcultivation system

Measurement of the correlation between sensor-protein expression, motility and environmental change is important for understanding the adaptation process of cells during their change of generation. We have developed a novel assay exploiting the on-chip cultivation system, which enabled us to observe the change of the localization of expressed sensor-protein and the motility for generations. Localization of the aspartate sensitive sensor protein at two poles in Escherichia coli decreased quickly after the aspartate was added into the cultivation medium. However, it took more than three generations for recovering the localization after the removal of aspartate from the medium. Moreover, the tumbling frequency was strongly related to the localization of the sensor protein in a cell. The results indicate that the change of the spatial localization of sensor protein, which was inherited for more than three generations, may contribute to cells, motility as the inheritable information.

Role of timer and sizer in regulation of Chlamydomonas cell cycle

To estimate the role that time and size had in controlling the Chlamydomonas cell cycle, we used a new on-chip single-cell microcultivation system, which involved the direct observation of single cells captured in microchambers made on a thin glass slide. The dependence of the pattern of energy supply for cells on its cell cycle was examined through a series of different intensities of continuous illumination in a minimal medium, and we found that cell division occurred when cells reached the critical size, which was 2.2 times larger than that of the newly created cells. When illumination stopped before cells reached the critical size, even though growth had stopped, they continued dividing during the delay time, which was shorter when cells were larger. With re-illumination after darkness, cells began to grow again and the timing of cell division was again controlled by the critical size. This indicates that the co-existence of two cell cycle regulation mechanisms and the sizer mechanism had a stronger influence than the timer.

Integration of polymer waveguides for optical detection in microfabricated chemical analysis systems

Multimode polymer waveguides and fiber-to-waveguide couplers have been integrated with microfluidic channels by use of a single-mask-step procedure, which ensured self-alignment between the optics and the fluidics and allowed a fabrication and packaging time of only one day. Three fabrication procedures for obtaining hermetically sealed channels were investigated, and the spectrally resolved propagation loss (400-900 nm) of the integrated waveguides was determined for all three procedures. Two chemical absorbance cells with optical path lengths of 100 and 1000 microm were furthermore fabricated and characterized in terms of coupling loss, sensitivity, and limit of detection for measurements of the dye bromothymol blue.

On-chip single-cell microcultivation assay for monitoring environmental effects on isolated cells

We have developed a on-chip single-cell microcultivation assay as a means of observing the adaptation process of single bacterial cells during nutrient concentration changes. This assay enables the direct observation of single cells captured in microchambers made on thin glass slides and having semipermeable membrane lids, in which cells were kept isolated with optical tweezers. After changing a medium of 0.2% (w/v) glucose concentration to make it nutrient-free 0.9% NaCl medium, the growth of all cells inserted into the medium stopped within 20 min, irrespective of their cell cycles. When a nutrient-rich medium was restored, the cells started to grow again, even after the medium had remained nutrient-free for 42 h. The results indicate that the cell's growth and division are directly related to their nutrient condition. The growth curve also indicates that the cells keep their memory of what their growth and division had been before they stopped growing.