Foaming properties of barley protein isolates and hydrolysates

Genotypic and environmental effects on quality and nutritional attributes of Moroccan barley cultivars and elite breeding lines

Although barley is mainly used for livestock feed and beverages, its use as human feed can enrich human diets with some health benefits. The development of new hulless varieties rich in β-glucans and micronutrients can enhance the use of barley as food, but little is known about the effects of the environment on these nutritional traits. In this study, we evaluated five Moroccan varieties and two elite breeding lines of barley at four locations in Morocco during the 2016-2017 and 2017-2018 cropping seasons. The results showed highly significant differences between genotypes for β-glucan, protein, iron, and selenium contents, as well as 1000 kernel weight, but not zinc content; significant to highly significant differences between environments for all traits except β-glucan content; and significant to highly significant interactions for all traits. The highest level of β-glucan content has reached 11.57% observed at the Sidi El Aydi site during the growing season 2017-2018 for the hulless variety Chifaa. This variety has shown the highest content of β-glucan (6.2-11.57%) over all environments except at Tassaout during the 2016-2017 seasons. The breeding line M9V5 has achieved significantly higher protein content at all the locations during the two growing seasons, ranging from 12.38 to 20.14%. Most hulless lines had significantly higher β-glucan and protein contents, but lower 1000 kernel weight. For micronutrients, the content ranges were 28.94 to 38.23 ppm for Fe, 28.78 to 36.49 ppm for Zn, and 0.14 to 0.18 ppm for Se, with the highest content for Fe and Zn shown by the breeding line M9V5 and Chifaa showing average contents of 33.39 ppm, 35.34 ppm, and 0.18 ppm for Fe, Zn, and Se, respectively. The GGE biplot confirmed the high and relatively stable content of β-glucan and acceptable micronutrient contents of the Chifaa variety and identified Marchouch as the most discriminant site to breed for biofortified barley varieties.

The foaming properties of sweet potato protein hydrolysates produced by Alcalase and Ficin

BACKGROUND

The processing of sweet potatoes generates a waste by-product rich in sweet potato protein (SPP).

OBJECTIVE

In this study, the effects of the concentrations of Alcalase and Ficin, hydrolysis time and pH value on the foaming properties of SPP hydrolysates (SPPHs) determined via gas sparging method were investigated.

RESULTS

The results showed that SPPH prepared by Alcalase exhibited a significantly higher foaming expansion (the highest of 576%) than that of the SPP (462%) but displayed a weaker liquid volume stability compared with SPPH hydrolyzed by Ficin. The molecular weight of SPPH prepared by Alcalase was distributed in 10-30 kDa. A good microbiological quality of the SPPH prepared by Alcalase in pH 13 has been confirmed, and it is suitable for food application with respect to its microbiological safety profile.

CONCLUSIONS

SPPH (pH 13) could be further safely applied in food, especially as a food additive at low concentrations to create a better organic plant-based foaming agent for the food industry. © 2023 Society of Chemical Industry.

Extraction, Composition, Functionality, and Utilization of Brewer’s Spent Grain Protein in Food Formulations

In recent years, brewer’s spent grain (BSG) has gained attention as a plant-based protein source because it occurs in large quantities as a by-product of beer brewing. BSG can contribute to future food requirements and support the development of a circular economy. In light of the dynamic developments in this area, this review aims to understand the proteins present in BSG, and the effect of extraction techniques and conditions on the composition, physicochemical, and techno-functional properties of the obtained protein extracts. The water-insoluble hordeins and glutelins form the major protein fractions in BSG. Depending on the beer brewing process, the extraction technique, and conditions, the BSG protein isolates predominantly contain B, C, and ϒ hordeins, and exhibit a broad molecular weight distribution ranging between <5 kDa and >250 kDa. While the BSG isolates obtained through chemical extraction methods seem promising to obtain gelled food products, physical and enzymatic modifications of BSG proteins through ultrasound and proteolytic hydrolysis offer an effective way to produce soluble and functional protein isolates with good emulsifying and foaming capabilities. Specifically tailored protein extracts to suit different applications can thus be obtained from BSG, highlighting that it is a highly valuable protein source.

Microencapsulation of β-carotene using barley residue proteins from beer waste as coating material

This study aimed to produce and characterise microparticles produced from barley residue proteins (BRP) enriched with β-carotene. The microparticles were obtained by freeze-drying five emulsion formulations with 0.5% w/w whey protein concentrate and different concentrations of maltodextrin and BRP (0, 1.5, 3.0, 4.5 and 6.0% w/w), with the dispersed phase consisting of corn oil enriched with β-carotene. The mixtures were mechanically mixed and sonicated, the formed emulsions were freeze-drying. The microparticles obtained were tested for encapsulation efficiency, humidity, hygroscopicity, apparent density, scanning electron microscopy (SEM), accelerated stability and bioaccessibility. Microparticles produced with the emulsion containing 6% w/w BRP had lower moisture content (3.47 ± 0.05%), higher encapsulation efficiency (69.11 ± 3.36%), bioaccessibility value of 84.1% and greater β-carotene protection against thermal degradation. SEM analysis showed that microparticles had sizes ranging from 74.4 to 244.8 µm. These results show that BRP are viable for the microencapsulation of bioactive compounds by freeze-drying.

Nano reduction coupled with encapsulation as a novel technique for utilising millet proteins as future foods

Crocin (saffron bioactive) loaded protein nanoparticles were prepared from three underutilised cereal varieties viz., sorghum (SPCN), foxtail millet (FPCN) and pearl millet (PPCN) using ultrasonication technique. The particle size of crocin loaded protein complex was attained in the nano range with reduced polydispersity index and negative zeta potential. The encapsulation efficiency of crocin in protein nanoparticles was found to be 83.78% (FPCN), 78.74 % (SPCN) and 70.01% (PPCN). The topographical images of crocin loaded protein nano complex was revealed using field emission-scanning electron microscopy (FE-SEM). The attenuated total reflectance fourier transform infra-spectroscopy (ATR-FTIR) analysis showed the characteristic peaks of crocin at 956, 1700 and 3350 cm^-1 in protein-crocin nanocomplex as a confirmatory test for nanoencapsulation. The antimicrobial activity of crocin loaded protein nanocomplex against three strains (Escherichia coli, Staphylococcus aureus and Fusarium oxysporium) were also evaluated. In vitro release studies showed higher content of crocin released in simulated intestinal conditions ensuring its controlled release at target site. Bioactivity (anti-cancerous and anti-hypertensive) of crocin upon in-vitro digestion were well retained indicating that protein nanoparticles can act as an effective wall material. Our results suggest that protein nanoparticles prepared in this study can act as an effective oral delivery vehicle for crocin that could be used for development of functional foods.

Barley Protein Properties, Extraction and Applications, with a Focus on Brewers' Spent Grain Protein

Barley is the most commonly used grain in the brewing industry for the production of beer-type beverages. This review will explore the extraction and application of proteins from barley, particularly those from brewers’ spent grain, as well as describing the variety of proteins present. As brewers’ spent grain is the most voluminous by-product of the brewing industry, the valorisation and utilisation of spent grain protein is of great interest in terms of sustainability, although at present, BSG is mainly sold cheaply for use in animal feed formulations. There is an ongoing global effort to minimise processing waste and increase up-cycling of processing side-streams. However, sustainability in the brewing industry is complex, with an innate need for a large volume of resources such as water and energy. In addition to this, large volumes of a by-product are produced at nearly every step of the process. The extraction and characterisation of proteins from BSG is of great interest due to the high protein quality and the potential for a wide variety of applications, including foods for human consumption such as bread, biscuits and snack-type products.

Impact of Ultrasound Treatment and pH-Shifting on Physicochemical Properties of Protein-Enriched Barley Fraction and Barley Protein Isolate

Ultrasonication alone or in combination with a pH-shifting method could be applied as means for improving the techno-functional properties and performance of barley protein ingredients in liquid food matrix. Ultrasound technology was utilised with and without pH-shifting to 3, 7 and 9 aiming at investigating their impact on primary protein structure, protein solubility, particle size and colloidal stability of an air-classified protein-enriched barley fraction and a barley protein isolate. Shifting the pH of sample dispersion to 9 followed by neutralisation to pH 7 improved protein solubility and colloidal stability of the isolate whereas it had less impact on the protein-enriched fraction. Ultrasound treatment improved both protein solubility and colloidal stability of the protein-enriched fraction at alkaline pH and particle size reduction by ultrasonication was observed at all the studied pH-values. For protein isolate, ultrasonication improved protein solubility at all pH-values and colloidal stability was improved at acidic and neutral pH whereas the sample was inherently stable at alkaline pH. The protein profiles of both ingredients remained unaffected by ultrasound treatment. The results suggest adopting ultrasonication as a promising tool for improving applicability of barley protein ingredients in liquid food systems.

Isolation and Purification of Glucans from an Italian Cultivar of Ziziphus jujuba Mill. and In Vitro Effect on Skin Repair

Glucans possess a broad spectrum of biological activities. In this context, the present study was performed to isolate glucans from an Italian cultivar of Ziziphus jujuba Mill. at three different harvesting periods, in order to evaluate their effects on wound healing. The dry fruits were subjected to an alkaline extraction and then isolated glucans were purified by dialyzation. The crude and soluble samples were characterized by FT-IR and SEM analyses. Afterwards, total, α- and β-glucan content was measured using an enzymatic procedure. The results highlighted that the glucan amount increased as the maturation proceeded as well as the β-glucan percentage, which ranged from 48.2 at the first harvesting to 65.4 at the third harvesting. Furthermore, the effects of isolated glucans on the viability and migration of keratinocytes were evaluated using the in vitro MTT and scratch wound assays. The best proliferative effects on keratinocyte migration have been achieved with soluble glucans from third harvesting at 100 μM after 24 and 48 h (*** P < 0.001). The same treated group showed significant narrowing of the scratch area after 24 h and complete closure of the injury after 48 h. The findings highlighted the effectiveness of soluble glucans on regeneration of damaged skin.

Exploring the Relationship between Structural and Air-Water Interfacial Properties of Wheat (Triticum aestivum L.) Gluten Hydrolysates in a Food System Relevant pH Range

The relationship between structural and foaming properties of two tryptic and two peptic wheat gluten hydrolysates was studied at different pH conditions. The impact of pH on foam stability (FS) of the samples heavily depended on the peptidase used and the degree of hydrolysis reached. Surface dilatational moduli were in most, but not all, instances related to FS, implying that, although the formation of a viscoelastic protein hydrolysate film is certainly important, this is not the only phenomenon that determines FS. In contrast to what might be expected, surface charge was not a major factor contributing to FS, except when close to the point-of-zero-charge. Surface hydrophobicity and intrinsic fluorescence measurements suggested that changes in protein conformation take place when the pH is varied, which can in turn influence foaming. Finally, hydrolyzed gluten proteins formed relatively large particles, suggesting that protein hydrolysate aggregation probably influences its foaming properties.

Relevance of the Functional Properties of Enzymatic Plant Protein Hydrolysates in Food Systems

Proteins play a crucial role in determining texture and structure of many food products. Although some animal proteins (such as egg white) have excellent functional and organoleptic properties, unfortunately, they entail a higher production cost and environmental impact than plant proteins. It is rather unfortunate that plant protein functionality is often insufficient because of low solubility in aqueous media. Enzymatic hydrolysis strongly increases solubility of proteins and alters their functional properties. The latter is attributed to 3 major structural changes: a decrease in average molecular mass, a higher availability of hydrophobic regions, and the liberation of ionizable groups. We here review current knowledge on solubility, water- and fat-holding capacity, gelation, foaming, and emulsifying properties of plant protein hydrolysates and discuss how these properties are affected by controlled enzymatic hydrolysis. In many cases, research in this field has been limited to fairly simple set-ups where functionality has been assessed in model systems. To evolve toward a more widely applied industrial use of plant protein hydrolysates, a more thorough understanding of functional properties is required. The structure-function relationship of protein hydrolysates needs to be studied in depth. Finally, test model systems closer to real food processing conditions, and thus to real foods, would be helpful to evaluate whether plant protein hydrolysates could be a viable alternative for other functional protein sources.

Effects of deamidation on structure and functional properties of barley hordein

Deamidated hordeins of various deamidation degree (DD) ranging from 0.7 to 40% were prepared using an alkaline method. The hordein peptide bond cleavage, secondary structure, surface charge and hydrophobicity as well as their solubility, emusifying and foaming properties were studied as a function of DD value. SDS-PAGE, size exclusion chromatography (SEC) and Fourier transform infrared (FTIR) results suggest that limited deamidation (≤ 4.7%) could dissociate hordein aggregates, leading to great increase of the protein solubility and surface hydrophobicty. A further increase of the DD value greater than 4.7% resulted in extensive protein hydrolysis and a marked change of protein secondary structure. The optimal functionalities were obtained at a narrow DD range (2.4-4.7%), where hordein samples demonstrated significantly improved solubility and the emulsifying and foaming properties at both acidic and neutral pHs. These results suggest that deamidated hordein would be an excellent candidate to be developed as an emulsifying and foaming ingredient.