Effect of storage time and temperature on structure, mechanical and barrier properties of chitosan-based films

Incorporation of co-encapsulated extracts of saffron petal and Stachys schtschegleevii into chitosan/basil seed gum/graphene oxide bionanocomposite: Effects on physical, mechanical, antioxidant, and antibacterial properties

The effects of encapsulation order and concentration (25 % & 50 %) of saffron petal (SPE) and Stachys schtschegleevii (SSE) extracts on the properties of bionanocomposites (BNCs) composed of basil seed gum (BSG), chitosan (CH), and graphene oxide (GO) were evaluated. Two encapsulation approaches were employed: in the first, SPE was encapsulated via complex coacervation using CH and gum Arabic, then mixed with SSE, maltodextrin, BSG, and GO (0.1-0.2 %) before spray drying; in the second, the encapsulation order of SPE and SSE was reversed. Encapsulation order and GO concentration significantly increased thickness (by 20 %), water vapor permeability (by 50 %), and solubility (by 45 %). Thermal stability improved by 10 % in bionanocomposites containing 50 % co-encapsulated extracts. Fourier transform infrared spectroscopy confirmed the successful incorporation of co-encapsulated extracts, while microscopic analysis revealed small cracks with micro- and nano-sized particles (219 nm to 8.3 μm) in BNCs with spray-dried coacervates. Co-encapsulation enhanced antibacterial and antioxidant activity, while encapsulation order regulated the sequential release of bioactive compounds, enabling controlled antimicrobial or antioxidant release based on food deterioration patterns. These findings highlight the potential of co-encapsulated extracts in developing advanced BNCs for active food packaging, where controlled release of bioactive compounds is essential for preserving food quality.

Insights into recent innovations in barrier resistance of edible films for food packaging applications

The utilization of biopolymer-based food packaging holds significant promise in aligning with sustainability goals and enhancing food safety by offering a renewable, biodegradable, and safer alternative to traditional synthetic polymers. However, these biopolymer-derived films often exhibit poor barrier and mechanical properties, potentially limiting their commercial viability. Desirable barrier properties, such as moisture and oxygen resistance, are critical for preserving and maintaining the quality of packaged food products. This review comprehensively explores different traditional and advance methodologies employed to access the barrier properties of edible films. Additionally, this review thoroughly examines various approaches aimed at enhancing the barrier properties of edible films, such as the fabrication of multilayer films, the selection of biopolymers for composite films, as well as the integration of plasticizers, crosslinkers, hydrophobic agents, and nanocomposites. Moreover, the influence of process conditions, such as preparation techniques, homogenization, drying conditions, and rheological behavior, on the barrier properties of edible films has been discussed. The review provides valuable insights and knowledge for researchers and industry professionals to advance the use of biopolymer-based packaging materials and contribute to a more sustainable and food-safe future.

Chitosan Coating with Rosemary Extract Increases Shelf Life and Reduces Water Losses from Beef

This study aimed to evaluate the influence of films based on chitosan and rosemary extract on the physicochemical, microbiological, and oxidative characteristics of beef. Refrigerated steaks of Longissimus dorsi were distributed in a factorial arrangement (4 × 4) into four treatments consisting of four edible films (control; chitosan; chitosan + 4% rosemary extract; and chitosan + 8% rosemary extract) and four days of aging (0, 2, 4, and 8 days). Incorporating 4% or 8% rosemary extract into the chitosan film improved the characteristics of the films in terms of moisture absorption and elasticity. The edible coatings with chitosan and rosemary extract and the different days of aging increased the tenderness and decreased the lipid oxidation of beef. In addition, the chitosan films containing rosemary extract increased the water-holding capacity and decreased the cooking losses of beef. The films containing 4% and 8% rosemary extract decreased the development of mesophilic and psychrotrophic bacteria and Staphylococcus ssp. in beef. We recommend incorporating 4% rosemary extract into chitosan-based coatings to preserve the quality of refrigerated beef.

Preparation, physicochemical and biological evaluation of chitosan Pleurotus ostreatus polysaccharides active films for food packaging

The aim of this study was to create CS-POP composite films by blending Pleurotus ostreatus stalk polysaccharides (POP) and chitosan (CS). The effects of adding different concentrations (0 %, 0.25 %, 0.5 %, 0.75 %, and 1 %) of POP on the mechanical, barrier, and optical properties of the CS films were investigated. When the POP content is at 0.5 %, the tensile strength of the composite film reaches its maximum value at 13.691 MPa, showing a significant improvement compared to the tensile strength of the pure CS film. The structure of the CS and CS-POP composite films was characterized by FT-IR spectroscopy, XRD, TGA and SEM. The results indicate that due to the interaction between the two types of CS and POP, the formation of Schiff base, and the intermolecular hydrogen bonds between CS and POP, the addition of POP to CS films can result in a smoother and more stable crystalline structure in the composite film. The CS-POP composite films exhibited enhanced antioxidant and antibacterial activity compared to the CS films alone, with the highest DPPH scavenging activity of 72.43 %. The composite films also showed significant inhibitory effects on the growth of E. coli.

Effect of Time on the Properties of Bio-Nanocomposite Films Based on Chitosan with Bio-Based Plasticizer Reinforced with Nanofiber Cellulose

The deterioration of the performance of polysaccharide-based films over time, particularly their hydrophilicity and mechanical properties, is one of the main problems limiting their applications in the packaging industry. In the present study, we proposed to improve the performance of chitosan-based films through the use of: (1) nanocellulose as an additive to reduce their hydrophilic nature; (2) bio-based plasticizer to improve their mechanical properties; and (3) chestnut extract as an antimicrobial agent. To evaluate their stability over time, the properties of as-formed films (mechanical, hydrophilic, barrier and antibacterial) were studied immediately after preparation and after 7, 14 and 30 days. In addition, the morphological properties of the films were characterized by scanning electron microscopy, their structure by FTIR, their transparency by UV-Vis and their thermal properties by TGA. The films showed a hydrophobic character (contact angle above 100°), barrier properties to oxygen and carbon dioxide and strong antibacterial activity against Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Moreover, the use of nanofillers did not deteriorate the elongation at breaks or the thermal properties of the films, but their addition reduced the transparency. In addition, the results showed that the greatest change in film properties occurred within the first 7 days after sample preparation, after which the properties were found to stabilize.

Effect of milling intensity on the properties of chitin, chitosan and chitosan films obtained from grasshopper

To obtain high-quality insect products, milling was used as a modification tool and its effect on grasshopper chitin, chitosan and chitosan films was investigated. Three grasshopper powders were obtained and classified into coarse-milled powder (CMP, D90 = 956 μm), medium-milled powder (MMP, D90 = 492 μm), and ultrafine-milled powder (UMP, D90 = 79.1 μm). Fourier transform infrared spectroscopy illustrated that no drastic change due to milling was observed, but the crystallinity (X-ray diffraction) and thermal stability (Thermogravimetric analysis) of the chitin, chitosan and chitosan films reduced with increasing milling intensity. Besides, the purity of the chitin and the yield of chitosan obtained from UMP were improved. Chitosan prepared from UMP was also characterized by high degree of deacetylation (65.6 %) and solubility and rather low molecular weight (11.5 kDa), viscosity and water/fat binding capacity. The finer the powder used as the extraction material, the thinner the chitosan films and the more compact the structure. On the whole, the chitosan films prepared from the MMP had higher mechanical properties and better moisture-keeping ability on strawberries compared with CMP and UMP films. This study establishes the role milling intensity played in the modification of grasshopper products and provides a reference for practical applications.

Chitosan with Natural Additives as a Potential Food Packaging

Recently, the development of materials based on natural polymers have been observed. This is the result of increasing environmental degradation, as well as increased awareness and consumer expectations. Many industries, especially the packaging industry, face challenges resulting from legal regulations. Chitin is the most common biopolymer right after cellulose and is used to produce chitosan. Due to the properties of chitosan, such as non-toxicity, biocompatibility, as well as antimicrobial properties, chitosan-based materials are used in many industries. Many studies have been conducted to determine the suitability of chitosan materials as food packaging, and their advantages and limitations have been identified. Thanks to the possibility of modifying the chitosan matrix by using natural additives, it is possible to strengthen the antioxidant and antimicrobial activity of chitosan films, which means that, in the near future, chitosan-based materials will be a more environmentally friendly alternative to the plastic packaging used so far. The article presents literature data on the most commonly used natural additives, such as essential oils, plant extracts, or polysaccharides, and their effects on antimicrobial, antioxidant, mechanical, barrier, and optical properties. The application of chitosan as a natural biopolymer in food packaging extends the shelf-life of various food products while simultaneously reducing the use of synthetic plastics, which in turn will have a positive impact on the natural environment. However, further research on chitosan and its combinations with various materials is still needed to extent the application of chitosan in food packaging and bring its application to industrial levels.

Combined Effect of Drying Temperature and Varied Gelatin Concentration on Physicochemical and Antioxidant Properties of Ginger Oil Incorporated Chitosan Based Edible Films

In the present work, ginger essential oil (GEO) loaded chitosan (CS) based films incorporated with varying concentrations of gelatin (GE) were fabricated and dried at different conditions (25 °C and 45 °C). The physio-chemical, mechanical and antioxidant potential of the films were determined. Films dried at 45 °C showed better physical attributes and less thickness, swelling degree (SD), moisture content, water vapor permeability (WVP), more transparency, and better mechanical characteristics. Fourier transform infrared spectroscopy (FTIR) revealed the chemical composition and interaction between the functional groups of the film components. X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) findings revealed that samples dried at 45 °C had more crystalline structure, were thermally stable, and smoother. Antioxidant results showed that films dried at low temperature showed comparatively more (p < 0.0001) antioxidant activity. Additionally, an increase in gelatin concentration improved the tensile strength and swelling factor (p < 0.05), however, had no significant impact on other parameters. The overall results suggested better characteristics of GEO-loaded CS-GE based edible films when dried at 45 °C.

Preparation and characterization of thermoplastic polyurethanes blended with chitosan and starch processed through extrusion

The basic aim of the research work is to expand the application range of biomaterials in the field of medical by increasing antibacterial and biocompatible behavior of thermoplastic polyurethanes. Blends of thermoplastic polyurethanes with chitosan and starch were prepared through extrusion process. The effect of polysaccharides (corn starch and chitosan) incorporation in thermoplastic polyurethane matrix and polymers interaction on thermal and morphological aspects was investigated. Possible interaction among chitosan and starch within TPU matrix individually and together in a blend were assessed by Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffractometer (XRD). The results indicated that thermoplastic polyurethanes were semi crystalline in nature whereas hydrophilicity of prepared thermoplastic polyurethanes was determined by contact angle. Biological properties endowed that TPU blended with chitosan and starch possessed antibacterial and hemolytic potential. Hence, it can be a suitable candidate for biomedical applications.

The Combined Effect of Hot Water Treatment and Chitosan Coating on Mango (Mangifera indica L. cv. Kent) Fruits to Control Postharvest Deterioration and Increase Fruit Quality

The synergistic effect of dipping in 55 °C for 5 min of hot water (HW) and 1% chitosan coating during the storage of mango at 13 ± 0.5 °C and 85%–90% relative humidity for 28 days was investigated. The combined treatment significantly suppressed the fruit decay percentage compared with both the single treatment and the control. In addition, the specific activities of key plant defense-related enzymes, including peroxidase (POD) and catalase (CAT), markedly increased. The increase occurred in the pulp of the fruits treated with the combined treatment compared to those treated with HW or chitosan alone. While the control fruits showed the lowest values, the combination of pre-storage HW treatment and chitosan coating maintained higher values of flesh hue angle (h°), vitamin C content, membrane stability index (MSI) percentage, as well as lower weight loss compared with the untreated mango fruits. The combined treatment and chitosan treatment alone delayed fruit ripening by keeping fruit firmness, lessening the continuous increase of total soluble solids (TSS), and slowing the decrease in titratable acidity (TA). The results showed that the combined application of HW treatment and chitosan coating can be used as an effective strategy to suppress postharvest decay and improve the quality of mango fruits.

Chitosan as a Valuable Biomolecule from Seafood Industry Waste in the Design of Green Food Packaging

Chitosan is a versatile biomolecule with a broad range of applications in food and pharmaceutical products. It can be obtained by the alkaline deacetylation of chitin. This biomolecule can be extracted using conventional or green methods from seafood industry residues, e.g., shrimp shells. Chitin has limited applications because of its low solubility in organic solvents. Chitosan is soluble in acidified solutions allowing its application in the food industry. Furthermore, biological properties, such as antioxidant, antimicrobial, as well as its biodegradability, biocompatibility and nontoxicity have contributed to its increasing application as active food packaging. Nevertheless, some physical and mechanical features have limited a broader range of applications of chitosan-based films. Green approaches may be used to address these limitations, leading to well-designed chitosan-based food packaging, by employing principles of a circular and sustainable economy. In this review, we summarize the properties of chitosan and present a novel green technology as an alternative to conventional chitin extraction and to design environmentally friendly food packaging based on chitosan.

Combined approach consisting of slightly acidic electrolyzed water and chitosan coating to improve the internal quality of eggs during storage

BACKGROUND

Slightly acidic electrolyzed water (SAEW) has been shown to offer a promising alternative for the inactivation of bacteria on egg surfaces, but the cuticle of the egg is damaged during this disinfection process. However, if SAEW disinfection is followed by chitosan (CS) coating treatment, this will construct a new membrane and prevent the loss of moisture and carbon dioxide through the damaged cuticle. Hence, the objective of this study was to investigate the efficacy of SAEW disinfection followed by CS coating treatment for improving the internal quality of eggs during 6 weeks of storage at 25 °C.

RESULTS

Scanning electron microscopy revealed that SAEW-treated eggs had deeper and wider cracks than control eggs stored between 0 and 21 days. Moreover, the depth and width of the cracks in the uncoated eggs increased as storage time increased. However, the CS coating method was successfully used on SAEW-disinfected eggs to construct a barrier against the negative effects of shell damage. After 6 weeks of storage at 25 °C, the yolk index, albumen pH, Haugh unit value and weight loss value of the SAEW + CS group were 0.31%, 9.01%, 63.72% and 5.35%, respectively.

CONCLUSIONS

A combination of SAEW and CS was more effective at maintaining internal egg quality than SAEW or CS treatments alone during storage. © 2020 Society of Chemical Industry.

Chitosan Films Obtained from Brachystola magna (Girard) and Its Evaluation on Quality Attributes in Sausages during Storage

High molecular weight chitosan (≈322 kDa) was obtained from chitin isolated from Brachystola magna (Girard) to produced biodegradable films. Their physicochemical, mechanical and water vapor permeability (WVP) properties were compared against commercial chitosan films with different molecular weights. Brachystola magna chitosan films (CFBM) exhibited similar physicochemical and mechanical characteristics to those of commercial chitosans. The CFBM films presented lower WVP values (10.01 × 10⁻¹¹ g/m s Pa) than commercial chitosans films (from 16.06 × 10⁻¹¹ to 64.30 × 10⁻¹¹ g/m s Pa). Frankfurt-type sausages were covered with chitosan films and stored in refrigerated conditions (4 °C). Their quality attributes (color, weight loss, pH, moisture, texture and lipid oxidation) were evaluated at 0, 5, 10, 15 and 20 days. Sausages covered with CFMB films presented the lowest weight loss (from 1.24% to 2.38%). A higher increase in hardness (from 22.32 N to 30.63 N) was observed in sausages covered with CFMB films. Compared with other films and the control (uncovered sausages), CFMB films delay pH reduction. Moreover, this film presents the lower lipid oxidation level (0.10 malonaldehyde mg/sample kg). Thus, chitosan of B. magna could be a good alternative as packaging material for meat products with high-fat content.

Shelf life evaluation of fresh chicken burgers based on the combination of chitosan dip and vacuum packaging under refrigerated storage

The aim of the present study was to investigate the combined effect of chitosan dip (1% w/v) and vacuum packaging on the shelf life of fresh chicken burgers packaged in LDPE/PA/LDPE bags and stored at 4 ± 1 ^°C for up to 12 days. Furthermore, the possible correlation among microbiological, physico-chemical and sensory indices was investigated. Burger treatments included: aerobic packaging (AP, control), vacuum packaging (VP), chitosan dipping (CHI), and vacuum packaging plus chitosan dipping (VP + CHI). Microbiological [Total viable count (TVC), Pseudomonas spp., Brochothrix thermosphacta, Enterobacteriaceae, Lactic acid bacteria (LAB)], physicochemical [color, pH, total volatile basic Nitrogen (TVB-N), and Thiobarbituric acid (TBA)] and sensory (odor, taste, and texture) analyses were carried out. Results showed that the majority of microbiological, physico-chemical, and sensory analysis parameters varied significantly (p < 0.05) depending on treatment. Based primarily on sensory, followed by microbiological and physico-chemical data, the shelf life of chicken burgers was 4 days for AP samples, 8 days for VP samples, 10 days for CHI treated samples, and 12 days for the VP + CHI treated samples. Finally, a positive and significant correlation (p < 0.05) was observed among most microbiological, sensory, and physico-chemical data, introducing new data relating initial TVC to TVB-N values regarding alternative treatments of minced chicken meat for its optimum preservation.

Current advancements in chitosan-based film production for food technology; A review

Chitosan is obtained from chitin, which could be considered to be the most abundant polymer after cellulose. Owing to these properties, chitosan alone or chitosan-based composite film production is attaining huge attention in terms of applications from researchers and industrialists coming from divergent fields. To enhance the biological (mainly antimicrobial and antioxidant) and physiological (mainly mechanical, thermal and barrier) attributes of the chitosan-based films, a vast medley of plant extracts and supporting polymers has been blended into chitosan films. Considering the up to date literature reports based on chitosan film production and applications, it can be stated that still, the research ratio is low in this field. Chitosan blend/composite films with specific properties (superhydrophobicity, excellent mechanical strength, acceptable barrier properties) can be produced only for specific applications in food technology. In the current review, we tried to summarize the advancements made in the last 5-7 years in the field of chitosan film technology for its application in the food industry.

Efeito do armazenamento sobre a cor de filmes de quitosana

Resumo Este trabalho teve como objetivo determinar o efeito da inclusão de óleos essenciais (EOs) e do armazenamento na cor dos filmes de quitosana (CH) para os parâmetros de L*, a*, b* e ΔE. Os óleos essenciais de tomilho (TEO) e alecrim (REO) foram incluídos em concentrações de 0,5:1 e 1:1 p/p (EOs:CH), assim como suas combinações 50/50 (TEO:REO). Os filmes foram armazenados a temperaturas de 5 °C, 20 °C e, 33 °C e umidade relativa do ar de 60%, 75% e, 93% durante quatro semanas. Os parâmetros da cor foram determinados por refletância com componente especular incluído (RSIN) e por refletância com componente especular excluído (RSEX), usando seis padrões de fundos diferentes. A inclusão e o aumento da concentração de óleos essenciais, assim como o aumento do tempo, da temperatura e da umidade e o padrão de fundo alteraram os valores das variáveis resposta.

Chitosan-Based Coating with Antimicrobial Agents: Preparation, Property, Mechanism, and Application Effectiveness on Fruits and Vegetables

Chitosan coating is beneficial to maintaining the storage quality and prolonging the shelf life of postharvest fruits and vegetables, which is always used as the carrier film for the antimicrobial agents. This review focuses on the preparation, property, mechanism, and application effectiveness on the fruits and vegetables of chitosan-based coating with antimicrobial agents. Chitosan, derived by deacetylation of chitin, is a modified and natural biopolymer as the coating material. In this article, the safety and biocompatible and antimicrobial properties of chitosan were introduced because these attributes are very important for its application. The methods to prepare the chitosan-based coating with antimicrobial agents, such as essential oils, acid, and nanoparticles, were developed by other researchers. Meanwhile, the application of chitosan-based coating is mainly due to its antimicrobial activity and other functional properties, which were investigated, introduced, and analyzed in this review. Furthermore, the surface and mechanical properties were also investigated by researchers and concluded in this article. Finally, the effects of chitosan-based coating on the storage quality, microbial safety, and shelf life of fruits and vegetables were introduced. Their results indicated that chitosan-based coating with different antimicrobial agents would probably have wide prospect in the preservation of fruits and vegetables in the future.

Development of chitosan based edible films: process optimization using response surface methodology

Three-factors Box-Behnken design of response surface methodology (RSM) was used to optimize chitosan level (1.5, 2.0, 2.5 %w/v), glycerol level (0.5, 0.75, 1.0 %w/v) and drying temperature (35, 40, 45 °C) for the development of chitosan based edible films. The optimization was done on the basis of different responses viz. thickness, moisture, solubility, colour profile (L*, a*, b* value), penetrability, density, transmittance and water vapor transmission rate (WVTR). The linear effect of chitosan was significant (p < 0.05) on all the responses. However, density was only significantly (p < 0.05) affected by glycerol in a negative linear fashion. Drying temperature also significantly (p < 0.05) affected thickness, penetrability, transmittance and WVTR in linear terms. The quadratic regression coefficient of chitosan showed a significant effect (p < 0.05) on moisture, solubility and WVTR; glycerol level on moisture, L* value and transmittance; and drying temperature on a* value, penetrability, transmittance and WVTR. The effect of interaction of glycerol x temperature as well as chitosan x temperature was also significant (p < 0.05) on a* value and WVTR of edible films. The optimized conditions were: 2.0 % w/v chitosan level, 0.75 % w/v glycerol level and drying temperature 40 °C at a constant time of 48 h. All the response variables were in favourable range including thickness; 108.59 mμ, penetrability; 16.41 N, transmittance; 75.60 %, WVTR; 0.00174 g/m(2)-t for the optimized edible film. Results concluded that edible films with desirable bio-mechanical properties can be successfully developed and effectively utilized in the food packaging industry.