Phagomagnetic immunoassay for the rapid detection of Salmonella

Phage-Based Biosensing for Rapid and Specific Detection of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a major foodborne pathogen. Rapid and specific detection is crucial for controlling staphylococcal food poisoning. This study reported a Staphylococcus phage named LSA2302 showing great potential for applications in the rapid detection of S. aureus. Its biological characteristics were identified, including growth properties and stability under different pH and temperature conditions. The genomic analysis revealed that the phage has no genes associated with pathogenicity or drug resistance. Then, the phage-functionalized magnetic beads (pMB), serving as a biological recognition element, were integrated with ATP bioluminescence assays to establish a biosensing method for S. aureus detection. The pMB enrichment brought high specificity and a tenfold increase in analytical sensitivity during detection. The whole detection process could be completed within 30 min, with a broad linear range of 1 × 104 to 1 × 108 CFU/mL and a limit of detection (LOD) of 2.43 × 103 CFU/mL. After a 2 h pre-cultivation, this method is capable of detecting bacteria as low as 1 CFU/mL. The recoveries of S. aureus in spiked skim milk and chicken samples were 81.07% to 99.17% and 86.98% to 104.62%, respectively. Our results indicated that phage-based biosensing can contribute to the detection of target pathogens in foods.

In Vivo Capsid Engineering of Bacteriophages for Oriented Surface Conjugation

The current state-of-the-art in bacteriophage (phage) immobilization onto magnetic particles is limited to techniques that are less expensive and/or facile but nonspecific or those that are more expensive and/or complicated but ensure capsid-down orientation of the phages, as necessary to preserve infectivity and performance in subsequent applications (e.g., therapeutics, detection). These cost, complexity, and effectiveness limitations constitute the major hurdles that limit the scale-up of phage-based strategies and thus their accessibility in low-resource settings. Here, we report a plasmid-based technique that incorporates a silica-binding protein, L2, into the T7 phage capsid, during viral assembly, with and without inclusion of a flexible linker peptide, allowing for targeted binding of the phage capsid to silica without requiring the direct modification of the phage genome. L2-tagged phages were then immobilized onto silica-coated magnetic nanoparticles. Inclusion of the flexible linker between the phage capsid protein and the L2 protein improved immobilization density compared to both wild type T7 phages and L2-tagged phages without the flexible linker. Taken together, this work demonstrates phage capsid modification without engineering the phage genome, which provides an important step toward reducing the cost and increasing the specificity/directionality of phage immobilization methods and could be more broadly applied in the future for other phages for a range of other capsid tags and nanomaterials.

Stimuli-Responsive Electrospun Fluorescent Fibers Augmented with Aggregation-Induced Emission (AIE) for Smart Applications

This review addresses the latest advancements in the integration of aggregation-induced emission (AIE) materials with polymer electrospinning, to accomplish fine-scale electrospun fibers with tunable photophysical and photochemical properties. Micro- and nanoscale fibers augmented with AIE dyes (termed AIEgens) are bespoke composite systems that can overcome the limitation posed by aggregation-caused quenching, a critical deficiency of conventional luminescent materials. This review comprises three parts. First, the reader is exposed to the basic concepts of AIE and the fundamental mechanisms underpinning the restriction of intermolecular motions. This is followed by an introduction to electrospinning techniques pertinent to AIE-based fibers, and the core parameters for controlling fiber architecture and resultant properties. Second, exemplars are drawn from latest research to demonstrate how electrospun nanofibers and porous films incorporating modified AIEgens (especially tetraphenylethylene and triphenylamine derivatives) can yield enhanced photostability, photothermal properties, photoefficiency (quantum yield), and improved device sensitivity. Advanced applications are drawn from several promising sectors, encompassing optoelectronics, drug delivery and biology, chemosensors and mechanochromic sensors, and innovative photothermal devices, among others. Finally, the outstanding challenges together with potential opportunities in the nascent field of electrospun AIE-active fibers are presented, for stimulating frontier research and explorations in this exciting field.

Bacteriophage-Based Biosensors: A Platform for Detection of Foodborne Bacterial Pathogens from Food and Environment

Foodborne microorganisms are an important cause of human illness worldwide. Two-thirds of human foodborne diseases are caused by bacterial pathogens throughout the globe, especially in developing nations. Despite enormous developments in conventional foodborne pathogen detection methods, progress is limited by the assay complexity and a prolonged time-to-result. The specificity and sensitivity of assays for live pathogen detection may also depend on the nature of the samples being analyzed and the immunological or molecular reagents used. Bacteriophage-based biosensors offer several benefits, including specificity to their host organism, the detection of only live pathogens, and resistance to extreme environmental factors such as organic solvents, high temperatures, and a wide pH range. Phage-based biosensors are receiving increasing attention owing to their high degree of accuracy, specificity, and reduced assay times. These characteristics, coupled with their abundant supply, make phages a novel bio-recognition molecule in assay development, including biosensors for the detection of foodborne bacterial pathogens to ensure food safety. This review provides comprehensive information about the different types of phage-based biosensor platforms, such as magnetoelastic sensors, quartz crystal microbalance, and electrochemical and surface plasmon resonance for the detection of several foodborne bacterial pathogens from various representative food matrices and environmental samples.

Comparative Analysis of NanoLuc Luciferase and Alkaline Phosphatase Luminescence Reporter Systems for Phage-Based Detection of Bacteria

Reporter phage assays are a promising alternative to culture-based assays for rapidly detecting viable bacteria. The reporter systems used in phage-based detection are typically enzymes and their corresponding substrates that provide a signal following infection and expression. While several reporter systems have been developed, comparing reporter systems based on reported bacteria detection limits from literature can be challenging due to factors other than the reporter system that influence detection capabilities. To advance the development of phage-based assays, a systematic comparison and understanding of the components are necessary. The objective of this study was to directly compare two common enzyme-mediated luminescence reporter systems, NanoLuc/Nano-Glo and alkaline phosphatase (ALP*)/DynaLight, for phage-based detection of bacteria. The detection limits of the purified enzymes were determined, as well as the expression levels and bacteria detection capabilities following engineering of the coding genes into T7 phage and infection of E. coli BL21. When comparing the sensitivity of the purified enzymes, NLuc/Nano-Glo enzyme/substrate system demonstrated a lower detection limit than ALP*/DynaLight. In addition, the expression of the NLuc reporter following phage infection of E. coli was greater than ALP*. The lower detection limit combined with the higher expression resulted in a greater than 100-fold increase in sensitivity for the NLuc/Nano-Glo^® reporter system compared to ALP*/DynaLight when used for the detection of E. coli in a model system. These findings provide a comparative analysis of two common reporter systems used for phage-based detection of bacteria and a foundational understanding of these systems for engineering future reporter phage assays.

Recent Advances in Electrochemical Biosensors for the Detection of Salmonellosis: Current Prospective and Challenges

Salmonellosis is a major cause of foodborne infections, caused by Salmonella, posing a major health risk. It possesses the ability to infiltrate the food supply chain at any point throughout the manufacturing, distribution, processing or quality control process. Salmonella infection has increased severely and requires effective and efficient methods for early monitoring and detection. Traditional methods, such as real-time polymerase chain reaction and culture plate, consume a lot of time and are labor-intensive. Therefore, new quick detection methods for on-field applications are urgently needed. Biosensors provide consumer-friendly approaches for quick on-field diagnoses. In the last few years, there has been a surge in research into the creation of reliable and advanced electrochemical sensors for the detection of Salmonella strains in food samples. Electrochemical sensors provide extensive accuracy and reproducible results. Herein, we present a comprehensive overview of electrochemical sensors for the detection of Salmonella by focusing on various mechanisms of electrochemical transducer. Further, we explain new-generation biosensors (microfluidics, CRISPR- and IOT-based) for point-of care applications. This review also highlights the limitations of developing biosensors in Salmonella detection and future possibilities.

Strategies for Surface Immobilization of Whole Bacteriophages: A Review

Bacteriophage immobilization is a key unit operation in emerging biotechnologies, enabling new possibilities for biodetection of pathogenic microbes at low concentration, production of materials with novel antimicrobial properties, and fundamental research on bacteriophages themselves. Wild type bacteriophages exhibit extreme binding specificity for a single species, and often for a particular subspecies, of bacteria. Since their specificity originates in epitope recognition by capsid proteins, which can be altered by chemical or genetic modification, their binding specificity may also be redirected toward arbitrary substrates and/or a variety of analytes in addition to bacteria. The immobilization of bacteriophages on planar and particulate substrates is thus an area of active and increasing scientific interest. This review assembles the knowledge gained so far in the immobilization of whole phage particles, summarizing the main chemistries, and presenting the current state-of-the-art both for an audience well-versed in bioconjugation methods as well as for those who are new to the field.

Replacement of antibodies with bacteriophages in lateral flow assay of Salmonella Enteritidis

In this study, the analytical performance of bacteriophages for Salmonella Enteritidis was investigated using lateral flow assay (LFA) technique. The analytical performance characteristics of bacteriophages were compared with antibodies which are regularly used as analyte-specific agents in the lateral flow immunoassay test strip. Bacteriophages could be an alternative analyte-specific agents to antibodies in lateral flow assay testing of bacteria since they offer comparable sensitivity, specificity, and accuracy. In the present study, Surface Enhanced Raman Spectroscopy (SERS) and colorimetric measurements were combined in one platform and sensitive quantitation of target bacteria was accomplished with a total quantitative analysis time of less than 30 min. The developed Salmonella Enteritidis F5-4 phage-based LFA specifically responds to Salmonella Enteritidis, while lower SERS responses to different bacteria types including Bacillus subtilis, Micrococcus luteus, Escherichia coli, Salmonella Typhimurium were observed. The developed test strips were also applied for the determination of Salmonella Enteritidis in spiked chicken and egg samples.

The Application of Bacteriophage Diagnostics for Bacterial Pathogens in the Agricultural Supply Chain: From Farm-to-Fork

Bacteriophages (phages) have great potential not only as therapeutics but as diagnostics. Indeed, they have been developed and used to diagnose and detect bacterial infections, primarily in human clinical settings. The ability to rapidly detect and control bacterial pathogens in agriculture is of primary importance to maintain food security, improve animal health, and prevent the passage of zoonotic pathogens into the human population. Culture-based detection methods are often labor-intensive, and require further confirmatory tests, increasing costs and processing times needed for diagnostics. Molecular detection methods such as polymerase chain reaction are commonly used to determine the safety of food, however, a major drawback is their inability to differentiate between viable and nonviable bacterial pathogens in food. Phage diagnostics have been proven to be rapid, capable of identifying viable pathogens and do not require cultivation to detect bacteria. Phage detection takes advantage of the specificity of interaction between phage and their hosts. Furthermore, phage detection is cost effective, which is vitally important in agricultural supply chains where there is a drive to keep costs down to ensure that the cost of food does not increase. The full potential of phage detection/diagnostics is not wholly realized or commercialized. This review explores the current use and potential future scope of phage diagnostics and their application to various bacterial pathogens across agriculture and food supply chains.

Biosensors for rapid detection of Salmonella in food: A review

Salmonella is one of the main causes of foodborne infectious diseases, posing a serious threat to public health. It can enter the food supply chain at various stages of production, processing, distribution, and marketing. High prevalence of Salmonella necessitates efficient and effective approaches for its identification, detection, and monitoring at an early stage. Because conventional methods based on plate counting and real-time polymerase chain reaction are time-consuming and laborious, novel rapid detection methods are urgently needed for in-field and on-line applications. Biosensors provide many advantages over conventional laboratory assays in terms of sensitivity, specificity, and accuracy, and show superiority in rapid response and potential portability. They are now recognized as promising alternative tools and one of the most on-site applicable and end user-accessible methods for rapid detection. In recent years, we have witnessed a flourishing of studies in the development of robust and elaborate biosensors for detection of Salmonella in food. This review aims to provide a comprehensive overview on Salmonella biosensors by highlighting different signal-transducing mechanisms (optical, electrochemical, piezoelectric, etc.) and critically analyzing its recent trends, particularly in combination with nanomaterials, microfluidics, portable instruments, and smartphones. Furthermore, current challenges are emphasized and future perspectives are discussed.

A novel one-day phage-based test for rapid detection and enumeration of viable Mycobacterium avium subsp. paratuberculosis in cows' milk

Bacteriophage-based methods for the rapid detection of viable Mycobacterium avium subsp. paratuberculosis (MAP) in veterinary specimens are a recent addition to the Johne's disease diagnostic toolbox. Here, we report the use of D29 mycobacteriophage-coated tosylactivated paramagnetic beads to capture and concentrate MAP cells from samples (termed phagomagnetic separation, PhMS) and then naturally lyse viable MAP cells (from the inside out) to provide DNA for IS900 qPCR purposes. Transmission electron microscopy confirmed that D29 phages had bound to beads in the correct orientation and that the phage-coated beads captured MAP cells from a suspension. During test optimization, conventional IS900 PCR results were used to subjectively assess the effect of different phage:bead coating ratios, differing amounts of coated beads during PhMS, optimal incubation time post-PhMS to obtain maximal MAP DNA, and the potential benefit of a brief heat shock (55 °C/1 min) prior to IS900 TaqMan qPCR. The limit of detection 50% (LOD50%) of the optimised PhMS-qPCR assay was 10.00 MAP cells/50 ml milk (95% CI 1.20-82.83). Finally, in order to demonstrate the new assay's ability to detect viable MAP in naturally contaminated milk, bulk tank milk samples from 100 dairy farms were tested. Forty-nine (49%) of these tested PhMS-qPCR-positive, with viable MAP numbers detected ranging from 3-126 MAP/50 ml. The novel PhMS-qPCR assay is a sensitive, specific and easy-to-apply phage-based assay for viable MAP, with potential application for milk surveillance or diagnosis of Johne's disease. KEY POINTS: • Phage-coated magnetic beads could capture, concentrate and lyse MAP cells from milk. • PhMS-qPCR assay proved to be a rapid, sensitive and specific test for viable MAP. • A potential application of PhMS-qPCR assay for milk surveillance was demonstrated.

Accurate and sensitive detection of Salmonella in foods by engineered bacteriophages

Salmonella is a major causative agent of foodborne illness and rapid identification of this pathogen is essential to prevent disease. Currently most assays require high bacterial burdens or prolonged enrichment to achieve acceptable performance. A reduction in testing time without loss of sensitivity is critical to allow food processors to safely decrease product holding time. To meet this need, a method was developed to detect Salmonella using luciferase reporter bacteriophages. Bacteriophages were engineered to express NanoLuc, a novel optimized luciferase originating from the deep-sea shrimp Oplophorus gracilirostris. NanoLuc-expressing bacteriophages had a limit of detection of 10-100 CFU per mL in culture without enrichment. Luciferase reporters demonstrated a broad host range covering all Salmonella species with one reporter detecting 99.3% of 269 inclusivity strains. Cross-reactivity was limited and only observed with other members of the Enterobacteriaceae family. In food matrix studies, a cocktail of engineered bacteriophages accurately detected 1 CFU in either 25 g of ground turkey with a 7 h enrichment or 100 g of powdered infant formula with a 16 h enrichment. Use of the NanoLuc reporter assay described herein resulted in a considerable reduction in enrichment time without a loss of sensitivity.

Application of Bacteriophages in Nanotechnology

Bacteriophages (phages for short) are viruses, which have bacteria as hosts. The single phage body virion, is a colloidal particle, often possessing a dipole moment. As such, phages were used as perfectly monodisperse systems to study various physicochemical phenomena (e.g., transport or sedimentation in complex fluids), or in the material science (e.g., as scaffolds). Nevertheless, phages also execute the life cycle to multiply and produce progeny virions. Upon completion of the life cycle of phages, the host cells are usually destroyed. Natural abilities to bind to and kill bacteria were a starting point for utilizing phages in phage therapies (i.e., medical treatments that use phages to fight bacterial infections) and for bacteria detection. Numerous applications of phages became possible thanks to phage display-a method connecting the phenotype and genotype, which allows for selecting specific peptides or proteins with affinity to a given target. Here, we review the application of bacteriophages in nanoscience, emphasizing bio-related applications, material science, soft matter research, and physical chemistry.

Immunomagnetic Separation of Salmonella with Tailored Magnetic Micro- and Nanocarriers

One of the main drawbacks in current methods for bacterium detection is their quantification at very low concentration level in complex specimens. Novel developments that are needed involve solid-phase preconcentration procedures which can be easily integrated with emerging technologies. Here, we describe the immunomagnetic separation (IMS) of Salmonella using magnetic carriers. Nano (300 nm) and micro (2.8 μm) sized magnetic particles are modified with anti-Salmonella antibody to preconcentrate the bacteria from the samples throughout an immunological reaction. The immunomagnetic separation can be easily coupled with downstream characterization and quantification methods, including classical culturing, molecular biology techniques such as PCR, immunoassays, confocal and scanning electron microscopy, and emerging technologies and rapid detection methods including biosensors, lateral flow, and microfluidic devices.

Recent Progress in the Detection of Bacteria Using Bacteriophages: A Review

Bacteria will likely become our most significant enemies of the 21st century, as we are approaching a post-antibiotic era. Bacteriophages, viruses that infect bacteria, allow us to fight infections caused by drug-resistant bacteria and create specific, cheap, and stable sensors for bacteria detection. Here, we summarize the recent developments in the field of phage-based methods for bacteria detection. We focus on works published after mid-2017. We underline the need for further advancements, especially related to lowering the detection (below 1 CFU/mL; CFU stands for colony forming units) and shortening the time of analysis (below one hour). From the application point of view, portable, cheap, and fast devices are needed, even at the expense of sensitivity.

Rapid detection of Escherichia coli using bacteriophage-induced lysis and image analysis

Rapid detection of bacterial pathogens is a critical unmet need for both food and environmental samples such as irrigation water. As a part of the Food safety Modernization Act (FSMA), The Produce Safety rule has established several requirements for testing for the presence of generic Escherichia coli in water, but the current method available for testing (EPA M1603) demands specified multiple colony verification and highly trained personnel to perform these tests. The purpose of the study was to assess a phage induced bacterial lysis using quantitative image analysis to achieve rapid detection of E. coli at low concentrations within 8 hours. This study aimed to develop a simple yet highly sensitive and specific approach to detect target bacteria in complex matrices. In the study, E. coli cells were first enriched in tryptic soy broth (TSB), followed by T7 phage induced lysis, concentration, staining and fluorescent imaging. Image analysis was conducted including image pre-processing, image segmentation and quantitatively analysis of cellular morphological features (area, eccentricity and full width at half maximum). Challenge experiments using realistic matrices, including simulated fresh produce wash water, coconut water and spinach wash water, demonstrated the method can be applied for use in situations that occur in food processing facilities. The results indicated E. coli cells that are lysed by T7 phages demonstrated significantly (P < 0.05) higher extracellular DNA release, altered cellular shape (from rod to circular) and diffused fluorescent signal intensity. Using this biosensing strategy, a sensitivity to detect Escherichia coli at 10 CFU/ml within 8 hours was achieved, both in laboratory medium and in complex matrices. The proposed phage based biosensing strategy enables rapid detection of bacteria and is applicable to analysis of food systems. Furthermore, the steps involved in this assay can be automated to enable detection of target bacteria in food facilities without extensive resources.

Construction and application of carbohydrate microarrays to detect foodborne bacteria

The rapid detection of pathogenic bacteria is vital for the prevention of outbreaks of infectious diseases, including infections by the common foodborne bacteria E.coli and Salmonella Carbohydrate microarrays have been developed as a powerful method to investigate carbohydrate-protein interaction with only very small amounts of glycans, which show great potential for detect the carbohydrate mediated interaction with pathogens. Here, different mannose-coated microarrays were constructed and tested with E.coli (K-12 and BL-21) and Salmonella enterica strains (ATCC9184 and ATCC31685) exhibiting different mannose binding affinities. The optimized carbohydrate microarray was then applied to test the binding of 12 Salmonella enterica and 9 E.coli isolates from local patients for the first time and showed strong binding with certain serovars or subtypes. The results showed that microarray probed with the single mannose structure is not enough for the detection of bacteria with various serovars or subtypes, which contain a high degree of allelic variation in adhesin. We suggest that a complex carbohydrate microarray containing different glycan conformation may be needed for detection of different bacteria isolates.

Detection of Salmonella in Food Matrices, from Conventional Methods to Recent Aptamer-Sensing Technologies

Rapid detection of the foodborne pathogen Salmonella in food processing is of crucial importance to prevent food outbreaks and to ensure consumer safety. Detection and quantification of Salmonella species in food samples is routinely performed using conventional culture-based techniques, which are labor intensive, involve well-trained personnel, and are unsuitable for on-site and high-throughput analysis. To overcome these drawbacks, many research teams have developed alternative methods like biosensors, and more particularly aptasensors, were a nucleic acid is used as biorecognition element. The increasing interest in these devices is related to their high specificity, convenience, and relative rapid response. This review aims to present the advances made in these last years in the development of biosensors for the detection and the quantification of Salmonella, highlighting applications on meat from the chicken food chain.

Isolation and separation of Listeria monocytogenes using bacteriophage P100-modified magnetic particles

A bacteriophage-assisted magnetic separation method was developed for the isolation of Listeria monocytogenes from complex food matrices. The aim of this study is to understand the effect of phage immobilization methods and the magnetic particle sizes on the phage coupling and infectivity retention of the magnetic particles. In this study, bacteriophage P100-modified magnetic particles (PMMPs) were developed for the separation of L. monocytogenes from food matrices. Three sizes of magnetic particles (MP) (150 nm, 500 nm, and 1 μm) were used for phage immobilization via chemical and physical methods. The coupling ratio of phage was investigated, and the performance of each PMMP complex was evaluated by their L. monocytogenes capture efficiency. When compared to the chemical immobilization method, the physically immobilized PMMP complex achieved a higher capture efficiency initially, with excellent selectivity towards target bacteria. The PMMPs were further tested for selective isolation of L. monocytogenes using real food samples such as ground beef and whole milk.

Modified Bacteriophage Tail Fiber Proteins for Labeling, Immobilization, Capture, and Detection of Bacteria

A critical component of bacterial detection assays is choosing a suitable affinity molecule that retains sensitivity and specificity for the target pathogen over a wide range of in situ applications. Bacteriophages (phages) are bacterial viruses that bind and infect their host cells with unmatched specificity. Phage host range is often determined by their long tail fibers (LTFs) that mediate adsorption of the virus particle to potential bacterial host cells, by binding to specific cell surface receptors. The inherent specificity of the LTFs for distinct bacterial species makes them ideal candidates for development into recombinant affinity molecules. In this chapter, we describe the development of the Salmonella phage S16 LTF (S16 LTF) into an affinity molecule as part of a novel assay to detect Salmonella cells. The enzyme-linked long tail fiber assay (ELLTA) involves two steps: (1) Immobilization and separation of Salmonella cells using S16 LTF-coated paramagnetic beads (LTF-MBs), and (2) Labeling of bead-captured Salmonella using horseradish peroxidase-conjugated S16 LTF (HRP-LTF). Rapid HRP-mediated conversion of a chromogenic substrate provides visual confirmation for the presence of Salmonella. Overall, the ELLTA assay requires as little as 2 h to detect as few as 10² cfu/ml Salmonella cells from liquid culture. The absorbance of the enzyme-generated color substrate is largely proportional to the present bacterial concentrations between 10² and 10⁷ cfu/ml, providing semiquantitative determination of Salmonella cell counts. The methodology described in this chapter can be adapted for other phage receptor-binding proteins, to develop ELLTAs for the detection of other relevant bacterial pathogens.

Electrical detection of pathogenic bacteria in food samples using information visualization methods with a sensor based on magnetic nanoparticles functionalized with antimicrobial peptides

Outbreaks of foodborne diseases demand simple, rapid techniques for detecting pathogenic bacteria beyond the standard methods that are not applicable to routine analysis in the food industry and in the points of food consumption. In this work, we developed a sensitive, rapid and low-cost assay for detecting Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Salmonella typhimurium (S. typhi) in potable water and apple juice. The assay is based on electrical impedance spectroscopy measurements with screen-printed interdigitated electrodes coupled with magnetite nanoparticles functionalized with the antimicrobial peptide melittin (MLT). The data were analyzed with the information visualization methods Sammon's Mapping and Interactive Document Map to distinguish samples at two levels of contamination from food suitable for consumption. With this approach it has been possible to detect E. coli concentration down to 1 CFU mL^-1 in potable water and 3.5 CFU mL^-1 in apple juice without sample preparation, within only 25 min. This approach may serve as a low-cost, quick screening procedure to detect bacteria-related food poisoning, especially if the impedance data of several sensing units are combined.

Direct Detection of Escherichia coli, Staphylococcus aureus, and Salmonella spp. in Animal-derived Foods Using a Magnetic Bead-based Immunoassay

In this study, an immuno-magnetic bead (IMB)-based assay was developed to simultaneously detect Escherichia coli, Staphylococcus aureus, and Salmonella spp. and was tested in four animal-derived foods: beef, ham, egg, and ricotta cheese. The IMB-based assay exhibited good specificity by binding to five E. coli serotypes [capture efficiency (CE) average (avg.) 90.4%], five S. aureus strains (CE avg. 91.4%), and five Salmonella serotypes (CE avg. 95.4%) but not binding to non-target bacteria (CE<10%). Furthermore, the assay detected all three pathogens with a detection limit of 10 CFU/g without the need for enrichment or additional platforms. Since the results demonstrated that the IMB-based assay can effectively separate and enrich target bacteria from a variety of animal-derived food matrixes, the assay exhibits good specificity for potential use in providing rapid, immunological, presumptive identification of pathogenic bacteria.

Bacterial biosensing: Recent advances in phage-based bioassays and biosensors

In nature, different types of bacteria including pathogenic and beneficial ones exist in different habitats including environment, plants, animals, and humans. Among these, the pathogenic bacteria should be detected at earlier stages of infection; however, the conventional bacterial detection procedures are complex and time-consuming. In contrast, the advanced molecular approaches such as polymerase chain reaction (PCR) and enzyme-linked immunosorbent assay (ELISA) have significantly reduced the detection time; nevertheless, such approaches are not acceptable to a large extent and are mostly laborious and expensive. Therefore, the development of fast, inexpensive, sensitive, and specific approaches for pathogen detection is essential for different applications in food industry, clinical diagnosis, biological defense and counter-terrorism. To this end, the novel sensing approaches involving bacteriophages as recognition elements are receiving immense consideration owing to their high degree of specificity, accuracy, and reduced assay times. Besides, the phages are easily produced and are tolerant to extreme pH, temperature, and organic solvents as compared to antibodies. To date, several phage-based assays and sensors have been developed involving different systems such as quartz crystal microbalance, magnetoelastic platform, surface plasmon resonance, and electrochemical methods. This review highlights different taxonomic species and genera of phages infecting eight common disease-causing bacterial genera. It further overviews the most recent advancements in phage-based sensing assays and sensors. Likewise, it elaborates various whole-phage and phage components-based assays. Overall, this review emphasizes the importance of electrochemical biosensors as simple, reliable, cost-effective, and accurate tools for bacterial detection.

Recent advances in bacteriophage-based methods for bacteria detection

Fast and reliable bacteria detection is crucial for lowering the socioeconomic burden related to bacterial infections (e.g., in healthcare, industry or security). Bacteriophages (i.e., viruses with bacterial hosts) pose advantages such as great specificity, robustness, toughness and cheap preparation, making them popular biorecognition elements in biosensors and other assays for bacteria detection. There are several possible designs of bacteriophage-based biosensors. Here, we focus on developments based on whole virions as recognition agents. We divide the review into sections dealing with phage lysis as an analytical signal, phages as capturing elements in assays and phage-based sensing layers, putting the main focus on development reported within the past three years but without omitting the fundamentals.

Modified Bacteriophage S16 Long Tail Fiber Proteins for Rapid and Specific Immobilization and Detection of Salmonella Cells

Bacteriophage-based assays and biosensors rival traditional antibody-based immunoassays for detection of low-level Salmonella contaminations. In this study, we harnessed the binding specificity of the long tail fiber (LTF) from bacteriophage S16 as an affinity molecule for the immobilization, enrichment, and detection of Salmonella We demonstrate that paramagnetic beads (MBs) coated with recombinant gp37-gp38 LTF complexes (LTF-MBs) are highly effective tools for rapid affinity magnetic separation and enrichment of Salmonella Within 45 min, the LTF-MBs consistently captured over 95% of Salmonella enterica serovar Typhimurium cells from suspensions containing from 10 to 105 CFU · ml-1, and they yielded equivalent recovery rates (93% ± 5%, n = 10) for other Salmonella strains tested. LTF-MBs also captured Salmonella cells from various food sample preenrichments, allowing the detection of initial contaminations of 1 to 10 CFU per 25 g or ml. While plating of bead-captured cells allowed ultrasensitive but time-consuming detection, the integration of LTF-based enrichment into a sandwich assay with horseradish peroxidase-conjugated LTF (HRP-LTF) as a detection probe produced a rapid and easy-to-use Salmonella detection assay. The novel enzyme-linked LTF assay (ELLTA) uses HRP-LTF to label bead-captured Salmonella cells for subsequent identification by HRP-catalyzed conversion of chromogenic 3,3',5,5'-tetramethylbenzidine substrate. The color development was proportional for Salmonella concentrations between 102 and 107 CFU · ml-1 as determined by spectrophotometric quantification. The ELLTA assay took 2 h to complete and detected as few as 102 CFU · ml-1S Typhimurium cells. It positively identified 21 different Salmonella strains, with no cross-reactivity for other bacteria. In conclusion, the phage-based ELLTA represents a rapid, sensitive, and specific diagnostic assay that appears to be superior to other currently available tests.IMPORTANCE The incidence of foodborne diseases has increased over the years, resulting in major global public health issues. Conventional methods for pathogen detection can be laborious and expensive, and they require lengthy preenrichment steps. Rapid enrichment-based diagnostic assays, such as immunomagnetic separation, can reduce detection times while also remaining sensitive and specific. A critical component in these tests is implementing affinity molecules that retain the ability to specifically capture target pathogens over a wide range of in situ applications. The protein complex that forms the distal tip of the bacteriophage S16 long tail fiber is shown here to represent a highly sensitive affinity molecule for the specific enrichment and detection of Salmonella Phage-encoded long tail fibers have huge potential for development as novel affinity molecules for robust and specific diagnostics of a vast spectrum of bacteria.

Recent and emerging innovations in Salmonella detection: a food and environmental perspective

Salmonella is a diverse genus of Gram‐negative bacilli and a major foodborne pathogen responsible for more than a million illnesses annually in the United States alone. Rapid, reliable detection and identification of this pathogen in food and environmental sources is key to safeguarding the food supply. Traditional microbiological culture techniques have been the ‘gold standard’ for State and Federal regulators. Unfortunately, the time to result is too long to effectively monitor foodstuffs, especially those with very short shelf lives. Advances in traditional microbiology and molecular biology over the past 25 years have greatly improved the speed at which this pathogen is detected. Nonetheless, food and environmental samples possess a distinctive set of challenges for these newer, more rapid methodologies. Furthermore, more detailed identification and subtyping strategies still rely heavily on the availability of a pure isolate. However, major shifts in DNA sequencing technologies are meeting this challenge by advancing the detection, identification and subtyping of Salmonella towards a culture‐independent diagnostic framework. This review will focus on current approaches and state‐of‐the‐art next‐generation advances in the detection, identification and subtyping of Salmonella from food and environmental sources.

Visual detection technique for efficient screening and isolation of Salmonella based on a novel enrichment assay using chromatography membrane

To detect Salmonella more efficiently and isolate strains more easily, a novel and simple detection method that uses an enrichment assay and two chromogenic reactions on a chromatography membrane was developed. Grade 3 chromatography paper is used as functionalized solid phase support (SPS), which contains specially optimized medium. One reaction for screening is based on the sulfate-reducing capacity of Salmonella. Hydrogen sulfide (H2S) generated by Salmonella reacts with ammonium ferric citrate to produce black colored ferrous sulfide. Another reaction is based on Salmonella C8 esterase that is unique for Enterobacteriaceae except Serratia and interacts with 4-methylumbelliferyl caprylate (MUCAP) to produce fluorescent umbelliferone, which is visible under ultraviolet light. A very low detection limit (10(1) CFU ml(-1)) for Salmonella was achieved on the background of 10(5) CFU ml(-1) Escherichia coli. More importantly, testing with more than 1,000 anal samples indicated that our method has a high positive detection rate and is relatively low cost, compared with the traditional culture-based method. It took only 1 day for the preliminary screening and 2 days to efficiently isolate the Salmonella cells, indicating that the new assay is specific, rapid, and simple for Salmonella detection. In contrast to the traditional culture-based method, this method can be easily used to screen and isolate targeted strains with the naked eye. The results of quantitative and comparative experiments showed that the visual detection technique is an efficient alternative method for the screening of Salmonella spp. in many applications of large-sized samples related to public health surveillance.

One-step detection of pathogens and viruses: combining magnetic relaxation switching and magnetic separation

We report a sensing methodology that combines magnetic separation (MS) and magnetic relaxation switching (MS-MRS) for one-step detection of bacteria and viruses with high sensitivity and reproducibility. We first employ a magnetic field of 0.01 T to separate the magnetic beads of large size (250 nm in diameter) from those of small size (30 nm in diameter) and use the transverse relaxation time (T2) of the water molecules around the 30 nm magnetic beads (MB30) as the signal readout of the immunoassay. An MS-MRS sensor integrates target enrichment, extraction, and detection into one step, and the entire immunoassay can be completed within 30 min. Compared with a traditional MRS sensor, an MS-MRS sensor shows enhanced sensitivity, better reproducibility, and convenient operation, thus providing a promising platform for point-of-care testing.

Prevention of bacterial foodborne disease using nanobiotechnology

Foodborne disease is an important source of expense, morbidity, and mortality for society. Detection and control constitute significant components of the overall management of foodborne bacterial pathogens, and this review focuses on the use of nanosized biological entities and molecules to achieve these goals. There is an emphasis on the use of organisms called bacteriophages (phages: viruses that infect bacteria), which are increasingly being used in pathogen detection and biocontrol applications. Detection of pathogens in foods by conventional techniques is time-consuming and expensive, although it can also be sensitive and accurate. Nanobiotechnology is being used to decrease detection times and cost through the development of biosensors, exploiting specific cell-recognition properties of antibodies and phage proteins. Although sensitivity per test can be excellent (eg, the detection of one cell), the very small volumes tested mean that sensitivity per sample is less compelling. An ideal detection method needs to be inexpensive, sensitive, and accurate, but no approach yet achieves all three. For nanobiotechnology to displace existing methods (culture-based, antibody-based rapid methods, or those that detect amplified nucleic acid) it will need to focus on improving sensitivity. Although manufactured nonbiological nanoparticles have been used to kill bacterial cells, nanosized organisms called phages are increasingly finding favor in food safety applications. Phages are amenable to protein and nucleic acid labeling, and can be very specific, and the typical large "burst size" resulting from phage amplification can be harnessed to produce a rapid increase in signal to facilitate detection. There are now several commercially available phages for pathogen control, and many reports in the literature demonstrate efficacy against a number of foodborne pathogens on diverse foods. As a method for control of pathogens, nanobiotechnology is therefore flourishing.