Characterization and evolution of an activator-independent methanol dehydrogenase from Cupriavidus necator N-1

Electro-Driven Multi-Enzymatic Cascade Conversion of CO2 to Ethylene Glycol in Nano-Reactor

Multi-enzymatic cascade reaction provides a new avenue for C─C coupling directly from CO2 under mild conditions. In this study, a new pathway with four enzymes including formate dehydrogenase (PaFDH), formaldehyde dehydrogenase (BmFADH), glycolaldehyde synthase (PpGALS), and alcohol dehydrogenase (GoADH) is developed for directly converting CO2 gas molecules to ethylene glycol (EG) in vitro. A rhodium-based NADH regeneration electrode is constructed to continuously provide the proton and electron of this multi-enzymatic cascade reaction. The prepared electrode can reach the Faradaic Efficiency (FE) of 82.9% at -0.6 V (vs. Ag/AgCl) and the NADH productivity of 0.737 mM h-1. Shortening the reaction path is crucial for multi-enzymatic cascade reactions. Here, a hydrogen-bonded organic framework (HOF) nano-reactor is successfully developed to immobilize four enzymes in one pot with a striking enzyme loading capacity (990 mg enzyme g-1 material). Through integrating and optimization of NADH electro-regeneration and enzymatic catalysis in one pot, 0.15 mM EG is achieved with an average conversion rate of 7.15 × 10-7 mmol CO2 min-1 mg-1 enzymes in 6 h. These results shed light on electro-driven multi-enzymatic cascade conversion of C─C coupling from CO2 in the nano-reactor.

Evolutionary engineering of methylotrophic E. coli enables fast growth on methanol

As methanol can be derived from either CO2 or methane, methanol economy can play an important role in combating climate change. In this scenario, rapid utilization of methanol by an industrial microorganism is the first and crucial step for efficient utilization of the C1 feedstock chemical. Here, we report the development of a methylotrophic E. coli strain with a doubling time of 3.5 hours under optimal conditions, comparable or faster than native model methylotrophs Methylorubrum extorquens AM1 (Td~4hr) and Bacillus methanolicus at 37°C (Td~5hr). To accomplish this, we develop a bacterial artificial chromosome (BAC) with dynamic copy number variation (CNV) to facilitate overcoming the formaldehyde-induced DNA-protein cross-linking (DPC) problem in the evolution process. We track the genome variations of 75 cultures along the evolution process by next-generation sequencing, and identified the features of the fast-growing strain. After stabilization, the final strain (SM8) grows to 20 g/L of cell mass within 77 hrs in a bioreactor. This study illustrates the potential of dynamic CNV as an evolution tool and synthetic methylotrophs as a platform for sustainable biotechnological applications.

Formaldehyde: An Essential Intermediate for C1 Metabolism and Bioconversion

Formaldehyde is an intermediate metabolite of methylotrophic microorganisms that can be obtained from formate and methanol through oxidation-reduction reactions. Formaldehyde is also a one-carbon (C1) compound with high uniquely reactive activity and versatility, which is more amenable to further biocatalysis. Biosynthesis of high-value-added chemicals using formaldehyde as an intermediate is theoretically feasible and promising. This review focuses on the design of the biosynthesis of high-value-added chemicals using formaldehyde as an essential intermediate. The upstream biosynthesis and downstream bioconversion pathways of formaldehyde as an intermediate metabolite are described in detail, aiming to highlight the important role of formaldehyde in the transition from inorganic to organic carbon and carbon chain elongation. In addition, challenges and future directions of formaldehyde as an intermediate for the chemicals are discussed, with the expectation of providing ideas for the utilization of C1.

Quantitative assessment of methane bioconversion based on kinetics and bioenergetics

The biological conversion of methane under ambient conditions can be performed by methanotrophs that utilize methane as both a sole source of energy and a carbon source. However, compared to the established microbial chassis used for general fermentation with sugar as a feedstock, the productivity of methanotrophs is low. The fundamental knowledge of their metabolic or cellular bottlenecks is limited. In this review, the industrial-scale potential of methane bioconversion was evaluated. In particular, the enzyme kinetics associated with the oxidation and assimilation of methane were investigated to evaluate the potential of methane fermentation. The kinetics of enzymes involved in methane metabolism were compared with those used in the metabolic processes of traditional fermentation (glycolysis). Through this analysis, the current limitations of methane metabolism were identified. Methods for increasing the efficiency of methane bioconversion and directions for the industrial application of methane-based fermentation were discussed.

Novel cofactor regeneration-based magnetic metal-organic framework for cascade enzymatic conversion of biomass-derived bioethanol to acetoin

Upgrading biomass-derived bioethanol to higher-order alcohols using conventional biotechnological approaches is challenging. Herein, a novel, magnetic metal-organic-framework-based cofactor regeneration system was developed using ethanol dehydrogenase (EtDH:D46G), NADH oxidase (NOX), formolase (FLS:L482S), and nicotinamide adenine dinucleotide (NAD+) for converting rice straw-derived bioethanol to acetoin. A magnetic zeolitic imidazolate framework-8@Fe3O4/NAD+ (ZIF-8@Fe3O4/NAD+) regeneration system for cell-free cascade reactions was introduced and used to encapsulate EtDH:D46G, NOX, and FLS:L482S (ENF). ZIF-8@Fe3O4/NAD+ENF created an efficient microenvironment for three-step enzyme cascades. Under the optimized conditions, the yield of acetoin from 100 mM bioethanol using ZIF-8@Fe3O4/NAD+ENF was 90.4 %. The regeneration system showed 97.1 % thermostability at 50 °C. The free enzymes retained only 16.3 % residual conversion, compared with 91.2 % for ZIF-8@Fe3O4/NAD+ENF after ten cycles. The magnetic metal-organic-framework-based cofactor regeneration system is suitable for enzymatic cascade biotransformations and can be extended to other cascade systems for potential biotechnological applications.

Design, construction and optimization of formaldehyde growth biosensors with broad application in biotechnology

Formaldehyde is a key metabolite in natural and synthetic one-carbon metabolism. To facilitate the engineering of formaldehyde-producing enzymes, the development of sensitive, user-friendly, and cost-effective detection methods is required. In this study, we engineered Escherichia coli to serve as a cellular biosensor capable of detecting a broad range of formaldehyde concentrations. Using both natural and promiscuous formaldehyde assimilation enzymes, we designed three distinct E. coli growth biosensor strains that depend on formaldehyde for cell growth. These strains were engineered to be auxotrophic for one or several essential metabolites that could be produced through formaldehyde assimilation. The respective assimilating enzyme was expressed from the genome to compensate the auxotrophy in the presence of formaldehyde. We first predicted the formaldehyde dependency of the biosensors by flux balance analysis and then analysed it experimentally. Subsequent to strain engineering, we enhanced the formaldehyde sensitivity of two biosensors either through adaptive laboratory evolution or modifications at metabolic branch points. The final set of biosensors demonstrated the ability to detect formaldehyde concentrations ranging approximately from 30 μM to 13 mM. We demonstrated the application of the biosensors by assaying the in vivo activity of different methanol dehydrogenases in the most sensitive strain. The fully genomic nature of the biosensors allows them to be deployed as "plug-and-play" devices for high-throughput screenings of extensive enzyme libraries. The formaldehyde growth biosensors developed in this study hold significant promise for advancing the field of enzyme engineering, thereby supporting the establishment of a sustainable one-carbon bioeconomy.

A synthetic methylotrophic Escherichia coli as a chassis for bioproduction from methanol

Methanol synthesized from captured greenhouse gases is an emerging renewable feedstock with great potential for bioproduction. Recent research has raised the prospect of methanol bioconversion to value-added products using synthetic methylotrophic Escherichia coli, as its metabolism can be rewired to enable growth solely on the reduced one-carbon compound. Here we describe the generation of an E. coli strain that grows on methanol at a doubling time of 4.3 h-comparable to many natural methylotrophs. To establish bioproduction from methanol using this synthetic chassis, we demonstrate biosynthesis from four metabolic nodes from which numerous bioproducts can be derived: lactic acid from pyruvate, polyhydroxybutyrate from acetyl coenzyme A, itaconic acid from the tricarboxylic acid cycle and p-aminobenzoic acid from the chorismate pathway. In a step towards carbon-negative chemicals and valorizing greenhouse gases, our work brings synthetic methylotrophy in E. coli within reach of industrial applications.

Engineered methane biocatalysis: strategies to assimilate methane for chemical production

Methane (CH4), one of the greenhouse gases, is considered a promising feedstock for the biological production of fuels and chemicals. Although recent studies have demonstrated the capability of methanotrophs to convert CH4 into various bioproducts by metabolic engineering, the productivity has not reached commercial levels. As such, there is a growing interest in synthetic methanotrophic systems as an alternative. This review summarizes the strategies for enhancing native CH4 assimilation and discusses the challenges for the construction of synthetic methanotrophy into nonmethanotrophic industrial strains. Additionally, we suggest a mixed heterotrophic approach that integrates CH4 assimilation with glucose and xylose metabolism to improve productivity. The synthetic methanotrophic system presented in this review could pave the way for sustainable and efficient biomanufacturing using CH4.

An NAD+-dependent group Ⅲ alcohol dehydrogenase involved in long-chain alkane degradation in Acinetobacter venetianus RAG-1

Alcohol dehydrogenases (ADHs) are a class of key enzymes responsible for the oxidation of alkyl alcohols in the aerobic alkane metabolic pathway. Currently, the degradation mechanisms of short- and medium-chain alkanes are commonly reported, while those of long-chain alkanes have received less attention. In this work, a putative long-chain ADH was screened from Acinetobacter venetianus RAG-1 via RNA-seq with n-octacosane (C28) as the sole carbon source. Conserved sequence analysis revealed that it is a group III (Fe-containing/activated) ADH, which is widespread in the genus Acinetobacter. The deletion of adhA led to a significant reduction in the degradation of C28. AdhA exhibited optimal oxidative activity at pH 8.0 and 50 °C with NAD+ as coenzyme, while showing better tolerability to chemical reagents. Enzyme activity assay showed that AdhA owed the oxidative activity to a wide range of substrates including alkyl alcohols (C1-C32) and some isomeric alcohols, such as isopropanol, isobutanol, isoamyl alcohol, and propanetriol, and could reduce the alkyl aldehyde (C1-C12). Meanwhile, the binding of AdhA to different alkyl alcohols was mediated by different amino acids. AdhA is an ADH with an extremely broad substrate utilization range and excellent biochemical characteristics. These results provided important insights in the subsequent investigation of long-chain alkane degradation and petroleum pollution bioremediation.

Next-generation feedstocks methanol and ethylene glycol and their potential in industrial biotechnology

Microbial fermentation processes are expected to play an important role in reducing dependence on fossil-based raw materials for the production of everyday chemicals. In order to meet the growing demand for biotechnological products in the future, alternative carbon sources that do not compete with human nutrition must be exploited. The chemical conversion of the industrially emitted greenhouse gas CO2 into microbially utilizable platform chemicals such as methanol represents a sustainable strategy for the utilization of an abundant carbon source and has attracted enormous scientific interest in recent years. A relatively new approach is the microbial synthesis of products from the C2-compound ethylene glycol, which can also be synthesized from CO2 and non-edible biomass and, in addition, can be recovered from plastic waste. Here we summarize the main chemical routes for the synthesis of methanol and ethylene glycol from sustainable resources and give an overview of recent metabolic engineering work for establishing natural and synthetic microbial assimilation pathways. The different metabolic routes for C1 and C2 alcohol-dependent bioconversions were compared in terms of their theoretical maximum yields and their oxygen requirements for a wide range of value-added products. Assessment of the process engineering challenges for methanol and ethylene glycol-based fermentations underscores the theoretical advantages of new synthetic metabolic routes and advocates greater consideration of ethylene glycol, a C2 substrate that has received comparatively little attention to date.

Directed evolution of a neutrophilic and mesophilic methanol dehydrogenase based on high-throughput and accurate measurement of formaldehyde

Methanol is a promising one-carbon feedstock for biomanufacturing, which can be sustainably produced from carbon dioxide and natural gas. However, the efficiency of methanol bioconversion is limited by the poor catalytic properties of nicotinamide adenine dinucleotide (NAD⁺)-dependent methanol dehydrogenase (Mdh) that oxidizes methanol to formaldehyde. Herein, the neutrophilic and mesophilic NAD⁺-dependent Mdh from Bacillus stearothermophilus DSM 2334 (Mdh_Bs) was subjected to directed evolution for enhancing the catalytic activity. The combination of formaldehyde biosensor and Nash assay allowed high-throughput and accurate measurement of formaldehyde and facilitated efficient selection of desired variants. Mdh_Bs variants with up to 6.5-fold higher K_cat/K_M value for methanol were screened from random mutation libraries. The T153 residue that is spatially proximal to the substrate binding pocket has significant influence on enzyme activity. The beneficial T153P mutation changes the interaction network of this residue and breaks the α-helix important for substrate binding into two short α-helices. Reconstructing the interaction network of T153 with surrounding residues may represent a promising strategy to further improve Mdh_Bs, and this study provides an efficient strategy for directed evolution of Mdh.

Methanol-based biomanufacturing of fuels and chemicals using native and synthetic methylotrophs

Methanol has recently gained significant attention as a potential carbon substrate for the production of fuels and chemicals, owing to its high degree of reduction, abundance, and low price. Native methylotrophic yeasts and bacteria have been investigated for the production of fuels and chemicals. Alternatively, synthetic methylotrophic strains are also being developed by reconstructing methanol utilization pathways in model microorganisms, such as Escherichia coli. Owing to the complex metabolic pathways, limited availability of genetic tools, and methanol/formaldehyde toxicity, the high-level production of target products for industrial applications are still under development to satisfy commercial feasibility. This article reviews the production of biofuels and chemicals by native and synthetic methylotrophic microorganisms. It also highlights the advantages and limitations of both types of methylotrophs and provides an overview of ways to improve their efficiency for the production of fuels and chemicals from methanol.

Engineering Escherichia coli for Poly-β-hydroxybutyrate Production from Methanol

The naturally occurring one-carbon assimilation pathways for the production of acetyl-CoA and its derivatives often have low product yields because of carbon loss as CO2. We constructed a methanol assimilation pathway to produce poly-3-hydroxybutyrate (P3HB) using the MCC pathway, which included the ribulose monophosphate (RuMP) pathway for methanol assimilation and non-oxidative glycolysis (NOG) for acetyl-CoA (precursor for PHB synthesis) production. The theoretical product carbon yield of the new pathway is 100%, hence no carbon loss. We constructed this pathway in E. coli JM109 by introducing methanol dehydrogenase (Mdh), a fused Hps–phi (hexulose-6-phosphate synthase and 3-phospho-6-hexuloisomerase), phosphoketolase, and the genes for PHB synthesis. We also knocked out the frmA gene (encoding formaldehyde dehydrogenase) to prevent the dehydrogenation of formaldehyde to formate. Mdh is the primary rate-limiting enzyme in methanol uptake; thus, we compared the activities of three Mdhs in vitro and in vivo and then selected the one from Bacillus methanolicus MGA3 for further study. Experimental results indicate that, in agreement with the computational analysis results, the introduction of the NOG pathway is essential for improving PHB production (65% increase in PHB concentration, up to 6.19% of dry cell weight). We demonstrated that PHB can be produced from methanol via metabolic engineering, which provides the foundation for the future large-scale use of one-carbon compounds for biopolymer production.

Paving the way for synthetic C1 - Metabolism in Pseudomonas putida through the reductive glycine pathway

One-carbon (C1) compounds such as methanol, formate, and CO₂ are alternative, sustainable microbial feedstocks for the biobased production of chemicals and fuels. In this study, we engineered the carbon metabolism of the industrially important bacterium Pseudomonas putida to modularly assimilate these three substrates through the reductive glycine pathway. First, we demonstrated the functionality of the C1-assimilation module by coupling the growth of auxotrophic strains to formate assimilation. Next, we extended the module in the auxotrophic strains from formate to methanol-dependent growth using both NAD and PQQ-dependent methanol dehydrogenases. Finally, we demonstrated, for the first time, engineered CO₂-dependent formation of part of the biomass through CO₂ reduction to formate by the native formate dehydrogenase, which required short-term evolution to rebalance the cellular NADH/NAD ⁺ ratio. This research paves the way to further engineer P. putida towards full growth on formate, methanol, and CO₂ as sole feedstocks, thereby substantially expanding its potential as a sustainable and versatile cell factory.

C1-based biomanufacturing: Advances, challenges and perspectives

One-carbon (C1) compounds have emerged as a key research focus due to the growth of metabolic engineering and synthetic biology as affordable and sustainable nonfood sugar feedstocks for energy-efficient and environmentally friendly biomanufacturing. This paper summarizes and discusses current developments in C1 compounds for biomanufacturing. First, two primary groups of microbes that use C1 compounds (native and synthetic) are introduced, and the traits, categorization, and functions of C1 microbes are summarized. Second, engineering strategies for C1 utilization are compiled and reviewed, including reconstruction of C1-utilization pathway, enzyme engineering, cofactor engineering, genome-scale modeling, and adaptive laboratory evolution. Third, a review of C1 compounds' uses in the synthesis of biofuels and high-value compounds is presented. Finally, potential obstacles to C1-based biomanufacturing are highlighted along with future research initiatives.

Cytobacillus pseudoceanisediminis sp. nov., A Novel Facultative Methylotrophic Bacterium with High Heavy Metal Resistance Isolated from the Deep Underground Saline Spring

In this study, we present the characterization of the BNO1^T bacterial strain isolated from the deep subsurface saline spring at the Baksan Neutrino Observatory INR RAS (Kabardino-Balkaria, Russia). The complete genome sequence of the strain BNO1^T is 5,347,902 bp, with a GC content 41 and 49%. The cell wall peptidoglycan contains meso-diaminopimelic acid. The major isoprenoid quinone is MK-7 and the polar lipids are diphosphatidylglycerol, phosphatidylglycerol, and phosphatidylethanolamine. The major fatty acids are anteiso-C_15:0 (23.34%), iso-C_15:0 (20.10%), C_16:0 (11.96%), iso-C_16:0 (10.88%), and anteiso-C_17:0 (10.79%). The 16S rRNA gene sequence clearly demarcated the strain as belonging to Cytobacillus genera. Based on the phylogenetic analysis, ANI (average nucleotide identity) and dDDH (digital DNA-DNA hybridization) assessments we propose to assign the strain BNO1^T and other related strains to new species and to name it Cytobacillus pseudoceanisediminis sp. nov. (The values of ANI and dDDH between BNO1^T and Cytobacillus oceanisediminis CGMCC 1.10115 ^T are 80.65% and 24.7%, respectively; values of ANI and dDDH between BNO1^T and Cytobacillus firmus NCTC 10335 ^T are 89% and 38%, respectively). Genomic analysis of strain BNO1^T revealed pathways for C1 compounds oxidation and two pathways for C1 compounds assimilation: serine and ribulose monophosphate pathways. In addition, strain BNO1^T contains a plasmid (342,541 bp) coding multiple genes involved in heavy metal ion balance. Moreover, heavy metal toxicity testing confirmed the high potential of the strain BNO1^T as a source of metal resistance genes and enzymes. The type strain is BNO1^T (= BIM B-1921 ^T = VKM B-3664 ^T).

Developing methylotrophic microbial platforms for a methanol-based bioindustry

Methanol, a relatively cheap and renewable single-carbon feedstock, has gained considerable attention as a substrate for the bio-production of commodity chemicals. Conventionally produced from syngas, along with emerging possibilities of generation from methane and CO2, this C1 substrate can serve as a pool for sequestering greenhouse gases while supporting a sustainable bio-economy. Methylotrophic organisms, with the inherent ability to use methanol as the sole carbon and energy source, are competent candidates as platform organisms. Accordingly, methanol bioconversion pathways have been an attractive target for biotechnological and bioengineering interventions in developing microbial cell factories. This review summarizes the recent advances in methanol-based production of various bulk and value-added chemicals exploiting the native and synthetic methylotrophic organisms. Finally, the current challenges and prospects of streamlining these methylotrophic platforms are discussed.

Methanol-Dependent Carbon Fixation for Irreversible Synthesis of d-Allulose from d-Xylose by Engineered Escherichia coli

d-Allulose is a rare hexose with great application potential, owing to its moderate sweetness, low energy, and unique physiological functions. The current strategies for d-allulose production, whether industrialized or under development, utilize six-carbon sugars such as d-glucose or d-fructose as a substrate and are usually based on the principle of reversible Izumoring epimerization. In this work, we designed a novel route that coupled the pathways of methanol reduction, pentose phosphate (PP), ribulose monophosphate (RuMP), and allulose monophosphate (AuMP) for Escherichia coli to irreversibly synthesize d-allulose from d-xylose and methanol. After improving the expression of AlsE by SUMO fusion and regulating the carbon fluxes by knockout of FrmRAB, RpiA, PfkA, and PfkB, the titer of d-allulose in fed-batch fermentation reached ≈70.7 mM, with a yield of ≈0.471 mM/mM on d-xylose or ≈0.512 mM/mM on methanol.

Generation of an Escherichia coli strain growing on methanol via the ribulose monophosphate cycle

Methanol is a liquid with high energy storage capacity that holds promise as an alternative substrate to replace sugars in the biotechnology industry. It can be produced from CO₂ or methane and its use does not compete with food and animal feed production. However, there are currently only limited biotechnological options for the valorization of methanol, which hinders its widespread adoption. Here, we report the conversion of the industrial platform organism Escherichia coli into a synthetic methylotroph that assimilates methanol via the energy efficient ribulose monophosphate cycle. Methylotrophy is achieved after evolution of a methanol-dependent E. coli strain over 250 generations in continuous chemostat culture. We demonstrate growth on methanol and biomass formation exclusively from the one-carbon source by ¹³C isotopic tracer analysis. In line with computational modeling, the methylotrophic E. coli strain optimizes methanol oxidation by upregulation of an improved methanol dehydrogenase, increasing ribulose monophosphate cycle activity, channeling carbon flux through the Entner-Doudoroff pathway and downregulating tricarboxylic acid cycle enzymes. En route towards sustainable bioproduction processes, our work lays the foundation for the efficient utilization of methanol as the dominant carbon and energy resource.

Using one carbon compounds as feedstock is a promising approach in abating climate change. Here, the authors report the conversion of E. coli into a synthetic methylotroph that assimilates methanol via the ribulose monophosphate cycle and a set of distinctive mutations.

The Novel Monooxygenase Gene dipD in the dip Gene Cluster of Alcaligenes faecalis JQ135 Is Essential for the Initial Catabolism of Dipicolinic Acid

Dipicolinic acid (DPA), an essential pyridine derivative biosynthesized in Bacillus spores, constitutes a major proportion of global biomass carbon pool. Alcaligenes faecalis strain JQ135 could catabolize DPA through the "3HDPA (3-hydroxydipicolinic acid) pathway." However, the genes involved in this 3HDPA pathway are still unknown. In this study, a dip gene cluster responsible for DPA degradation was cloned from strain JQ135. The expression of dip genes was induced by DPA and negatively regulated by DipR. A novel monooxygenase gene, dipD, was crucial for the initial hydroxylation of DPA into 3HDPA and proposed to encode the key catalytic component of the multicomponent DPA monooxygenase. The heme binding protein gene dipF, ferredoxin reductase gene dipG, and ferredoxin genes dipJ/dipK/dipL were also involved in the DPA hydroxylation and proposed to encode other components of the multicomponent DPA monooxygenase. The ¹⁸O₂ stable isotope labeling experiments confirmed that the oxygen atom in the hydroxyl group of 3HDPA came from dioxygen molecule rather than water. The protein sequence of DipD exhibits no significant sequence similarities with known oxygenases, suggesting that DipD was a new member of oxygenase family. Moreover, bioinformatic survey suggested that the dip gene cluster was widely distributed in many Alpha-, Beta-, and Gammaproteobacteria, including soil bacteria, aquatic bacteria, and pathogens. This study provides new molecular insights into the catabolism of DPA in bacteria. IMPORTANCE Dipicolinic acid (DPA) is a natural pyridine derivative that serves as an essential component of the Bacillus spore. DPA accounts for 5 to 15% of the dry weight of spores. Due to the huge number of spores in the environment, DPA is also considered to be an important component of the global biomass carbon pool. DPA could be decomposed by microorganisms and enter the global carbon cycling; however, the underlying molecular mechanisms are rarely studied. In this study, a DPA catabolic gene cluster (dip) was cloned and found to be widespread in Alpha-, Beta-, and Gammaproteobacteria. The genes responsible for the initial hydroxylation of DPA to 3-hydroxyl-dipicolinic acid were investigated in Alcaligenes faecalis strain JQ135. The present study opens a door to elucidate the mechanism of DPA degradation and its possible role in DPA-based carbon biotransformation on earth.

Toward Methanol-Based Biomanufacturing: Emerging Strategies for Engineering Synthetic Methylotrophy in Saccharomyces cerevisiae

The global expansion of biomanufacturing is currently limited by the availability of sugar-based microbial feedstocks, which require farmland for cultivation and therefore cannot support large increases in production without impacting the human food supply. One-carbon feedstocks, such as methanol, present an enticing alternative to sugar because they can be produced independently of arable farmland from organic waste, atmospheric carbon dioxide, and hydrocarbons such as biomethane, natural gas, and coal. The development of efficient industrial microorganisms that can convert one-carbon feedstocks into valuable products is an ongoing challenge. This review discusses progress in the field of synthetic methylotrophy with a focus on how it pertains to the important industrial yeast, Saccharomyces cerevisiae. Recent insights generated from engineering synthetic methylotrophic xylulose- and ribulose-monophosphate cycles, reductive glycine pathways, and adaptive laboratory evolution studies are critically assessed to generate novel strategies for the future engineering of methylotrophy in S. cerevisiae.

From a Hetero- to a Methylotrophic Lifestyle: Flash Back on the Engineering Strategies to Create Synthetic Methanol-User Strains

Engineering microorganisms to grow on alternative feedstocks is crucial not just because of the indisputable biotechnological applications but also to deepen our understanding of microbial metabolism. One-carbon (C1) substrate metabolism has been the focus of extensive research for the prominent role of C1 compounds in establishing a circular bioeconomy. Methanol in particular holds great promise as it can be produced directly from greenhouse gases methane and carbon dioxide using renewable resources. Synthetic methylotrophy, i.e. introducing a non-native methanol utilization pathway into a model host, has therefore been the focus of long-time efforts and is perhaps the pinnacle of metabolic engineering. It entails completely changing a microorganism's lifestyle, from breaking up multi-carbon nutrients for growth to building C-C bonds from a single-carbon molecule to obtain all metabolites necessary to biomass formation as well as energy. The frontiers of synthetic methylotrophy have been pushed further than ever before and in this review, we outline the advances that paved the way for the more recent accomplishments. These include optimizing the host's metabolism, "copy and pasting" naturally existing methylotrophic pathways, "mixing and matching" enzymes to build new pathways, and even creating novel enzymatic functions to obtain strains that are able to grow solely on methanol. Finally, new approaches are contemplated to further advance the field and succeed in obtaining a strain that efficiently grows on methanol and allows C1-based production of added-value compounds.

Industrial light at the end of the Iron-containing (group III) alcohol dehydrogenase tunnel

There are three prominent alcohol dehydrogenases superfamilies: Short-chain, Medium-chain, and Iron-containing alcohol dehydrogenases (FeADHs). Many members are valuable catalysts for producing industrially relevant products such as Active pharmaceutical Intermediates, Chiral synthons, Biopolymers, Biofuels and secondary metabolites. However, FeADHs are the least explored enzymes among the superfamilies for commercial tenacities. They portray a conserved structure having a 'tunnel-like' cofactor and substrate binding site with particular functions, despite representing high sequence diversity. Interestingly, phylogenetic analysis demarcates enzymes catalyzing distinct native substrates where closely related clades convert similar molecules. Further, homologs from various mesophilic and thermophilic microbes have been explored for designing a solvent and temperature resistant enzyme for industrial purposes. The review explores different Iron-containing alcohol dehydrogenases potential engineering of the enzymes and substrates helpful in manufacturing commercial products. This article is protected by copyright. All rights reserved.

Methanol Dehydrogenases as a Key Biocatalysts for Synthetic Methylotrophy

One-carbon (C1) chemicals are potential building blocks for cheap and sustainable re-sources such as methane, methanol, formaldehyde, formate, carbon monoxide, and more. These resources have the potential to be made into raw materials for various products used in our daily life or precursors for pharmaceuticals through biological and chemical processes. Among the soluble C1 substrates, methanol is regarded as a biorenewable platform feedstock because nearly all bioresources can be converted into methanol through syngas. Synthetic methylotrophy can be exploited to produce fuels and chemicals using methanol as a feedstock that integrates natural or artificial methanol assimilation pathways in platform microorganisms. In the methanol utilization in methylotrophy, methanol dehydrogenase (Mdh) is a primary enzyme that converts methanol to formaldehyde. The discovery of new Mdhs and engineering of present Mdhs have been attempted to develop synthetic methylotrophic bacteria. In this review, we describe Mdhs, including in terms of their enzyme properties and engineering for desired activity. In addition, we specifically focus on the application of various Mdhs for synthetic methylotrophy.

A shortcut to carbon-neutral bioplastic production: Recent advances in microbial production of polyhydroxyalkanoates from C1 resources

Since the 20th century, plastics that are widely being used in general life and industries are causing enormous plastic waste problems since improperly discarded plastics barely degrade and decompose. Thus, the demand for polyhydroxyalkanoates (PHAs), biodegradable polymers with material properties similar to conventional petroleum-based plastics, has been increased so far. The microbial production of PHAs is an environment-friendly solution for the current plastic crisis, however, the carbon sources for the microbial PHA production is a crucial factor to be considered in terms of carbon-neutrality. One‑carbon (C1) resources, such as methane, carbon monoxide, and carbon dioxide, are greenhouse gases and are abundantly found in nature and industry. C1 resources as the carbon sources for PHA production have a completely closed carbon loop with much advances; i) fast carbon circulation with direct bioconversion process and ii) simple fermentation procedure without sterilization as non-preferable nutrients. This review discusses the biosynthesis of PHAs based on C1 resource utilization by wild-type and metabolically engineered microbial host strains via biorefinery processes.

Aerobic Utilization of Methanol for Microbial Growth and Production

Methanol is a reduced one-carbon (C1) compound. It supports growth of aerobic methylotrophs that gain ATP from reduced redox equivalents by respiratory phosphorylation in their electron transport chains. Notably, linear oxidation of methanol to carbon dioxide may yield three reduced redox equivalents if methanol oxidation is NAD-dependent as, e.g., in Bacillus methanolicus. Methanol has a higher degree of reduction per carbon than glucose (6 vs. 4), and thus, lends itself as an ideal carbon source for microbial production of reduced target compounds. However, C-C bond formation in the RuMP or serine cycle, a prerequisite for production of larger molecules, requires ATP and/or reduced redox equivalents. Moreover, heat dissipation and a high demand for oxygen during catabolic oxidation of methanol may pose challenges for fermentation processes. In this chapter, we summarize metabolic pathways for aerobic methanol utilization, aerobic methylotrophs as industrial production hosts, strain engineering, and methanol bioreactor processes. In addition, we provide technological and market outlooks.

An orthogonal metabolic framework for one-carbon utilization

Metabolic engineering often entails concurrent engineering of substrate utilization, central metabolism and product synthesis pathways, inevitably creating interdependency with native metabolism. Here we report an alternative approach using synthetic pathways for C1 bioconversion that generate multicarbon products directly from C1 units and hence are orthogonal to the host metabolic network. The engineered pathways are based on formyl-CoA elongation (FORCE) reactions catalysed by the enzyme 2-hydroxyacyl-CoA lyase. We use thermodynamic and stoichiometric analyses to evaluate FORCE pathway variants, including aldose elongation, α-reduction and aldehyde elongation. Promising variants were prototyped in vitro and in vivo using the non-methylotrophic bacterium Escherichia coli. We demonstrate the conversion of formate, formaldehyde and methanol into various products including glycolate, ethylene glycol, ethanol and glycerate. FORCE pathways also have the potential to be integrated with the host metabolism for synthetic methylotrophy by the production of native growth substrates as demonstrated in a two-strain co-culture system.

Bioconversion of Methanol by Synthetic Methylotrophy

As an important building block in the chemical industry, methanol has become an attractive substrate in biorefinery owing to its abundance and low cost. With the development of synthetic biology, metabolic engineering of non-methylotrophy to construct synthetic methylotrophy has drawn increased attention. As for the metabolic construction of methanol assimilation pathway in some industrial hosts, several artificial methanol assimilation pathways have recently been designed and constructed based on the computer-aided design. Particularly, these artificial methanol assimilation pathways possess advantages of shorter reaction steps, stronger driving forces, and independence on oxygen. Accordingly, this chapter reviewed strategies of constructing synthetic methylotrophs, including introducing methanol metabolic modules derived from natural methylotrophs and designing artificial methanol assimilation pathways. Future challenges and prospects were also discussed.

Recent advances toward the bioconversion of methane and methanol in synthetic methylotrophs

Abundant natural gas reserves, along with increased biogas production, have prompted recent interest in harnessing methane as an industrial feedstock for the production of liquid fuels and chemicals. Methane can either be used directly for fermentation or first oxidized to methanol via biological or chemical means. Methanol is advantageous due to its liquid state under normal conditions. Methylotrophy, defined as the ability of microorganisms to utilize reduced one-carbon compounds like methane and methanol as sole carbon and energy sources for growth, is widespread in bacterial communities. However, native methylotrophs lack the extensive and well-characterized synthetic biology toolbox of platform microorganisms like Escherichia coli, which results in slow and inefficient design-build-test cycles. If a heterologous production pathway can be engineered, the slow growth and uptake rates of native methylotrophs generally limit their industrial potential. Therefore, much focus has been placed on engineering synthetic methylotrophs, or non-methylotrophic platform microorganisms, like E. coli, that have been engineered with synthetic methanol utilization pathways. These platform hosts allow for rapid design-build-test cycles and are well-suited for industrial application at the current time. In this review, recent progress made toward synthetic methylotrophy (including methanotrophy) is discussed. Specifically, the importance of amino acid metabolism and alternative one-carbon assimilation pathways are detailed. A recent study that has achieved methane bioconversion to liquid chemicals in a synthetic E. coli methanotroph is also briefly discussed. We also discuss strategies for the way forward in order to realize the industrial potential of synthetic methanotrophs and methylotrophs.

Strategies and challenges with the microbial conversion of methanol to high-value chemicals

As alternatives to traditional fermentation substrates, methanol (CH₃ OH), carbon dioxide (CO₂ ) and methane (CH₄ ) represent promising one-carbon (C1) sources that are readily available at low-cost and share similar metabolic pathway. Of these C1 compounds, methanol is used as a carbon and energy source by native methylotrophs, and can be obtained from CO₂ and CH₄ by chemical catalysis. Therefore, constructing and rewiring methanol utilization pathways may enable the use of one-carbon sources for microbial fermentations. Recent bioengineering efforts have shown that both native and nonnative methylotrophic organisms can be engineered to convert methanol, together with other carbon sources, into biofuels and other commodity chemicals. However, many challenges remain and must be overcome before industrial-scale bioprocessing can be established using these engineered cell refineries. Here, we provide a comprehensive summary and comparison of methanol metabolic pathways from different methylotrophs, followed by a review of recent progress in engineering methanol metabolic pathways in vitro and in vivo to produce chemicals. We discuss the major challenges associated with establishing efficient methanol metabolic pathways in microbial cells, and propose improved designs for future engineering.

Improving the Methanol Tolerance of an Escherichia coli Methylotroph via Adaptive Laboratory Evolution Enhances Synthetic Methanol Utilization

There is great interest in developing synthetic methylotrophs that harbor methane and methanol utilization pathways in heterologous hosts such as Escherichia coli for industrial bioconversion of one-carbon compounds. While there are recent reports that describe the successful engineering of synthetic methylotrophs, additional efforts are required to achieve the robust methylotrophic phenotypes required for industrial realization. Here, we address an important issue of synthetic methylotrophy in E. coli: methanol toxicity. Both methanol, and its oxidation product, formaldehyde, are cytotoxic to cells. Methanol alters the fluidity and biological properties of cellular membranes while formaldehyde reacts readily with proteins and nucleic acids. Thus, efforts to enhance the methanol tolerance of synthetic methylotrophs are important. Here, adaptive laboratory evolution was performed to improve the methanol tolerance of several E. coli strains, both methylotrophic and non-methylotrophic. Serial batch passaging in rich medium containing toxic methanol concentrations yielded clones exhibiting improved methanol tolerance. In several cases, these evolved clones exhibited a > 50% improvement in growth rate and biomass yield in the presence of high methanol concentrations compared to the respective parental strains. Importantly, one evolved clone exhibited a two to threefold improvement in the methanol utilization phenotype, as determined via ¹³C-labeling, at non-toxic, industrially relevant methanol concentrations compared to the respective parental strain. Whole genome sequencing was performed to identify causative mutations contributing to methanol tolerance. Common mutations were identified in 30S ribosomal subunit proteins, which increased translational accuracy and provided insight into a novel methanol tolerance mechanism. This study addresses an important issue of synthetic methylotrophy in E. coli and provides insight as to how methanol toxicity can be alleviated via enhancing methanol tolerance. Coupled improvement of methanol tolerance and synthetic methanol utilization is an important advancement for the field of synthetic methylotrophy.

Biosensor-Based Directed Evolution of Methanol Dehydrogenase from Lysinibacillus xylanilyticus

Methanol dehydrogenase (Mdh), is a crucial enzyme for utilizing methane and methanol as carbon and energy sources in methylotrophy and synthetic methylotrophy. Engineering of Mdh, especially NAD-dependent Mdh, has thus been actively investigated to enhance methanol conversion. However, its poor catalytic activity and low methanol affinity limit its wider application. In this study, we applied a transcriptional factor-based biosensor for the direct evolution of Mdh from Lysinibacillus xylanilyticus (Lxmdh), which has a relatively high turnover rate and low K_M value compared to other wild-type NAD-dependent Mdhs. A random mutant library of Lxmdh was constructed in Escherichia coli and was screened using formaldehyde-detectable biosensors by incubation with low methanol concentrations. Positive clones showing higher fluorescence were selected by fluorescence-activated cell sorting (FACS) system, and their catalytic activities toward methanol were evaluated. The successfully isolated mutants E396V, K318N, and K46E showed high activity, particularly at very low methanol concentrations. In kinetic analysis, mutant E396V, K318N, and K46E had superior methanol conversion efficiency, with 79-, 23-, and 3-fold improvements compared to the wild-type, respectively. These mutant enzymes could thus be useful for engineering synthetic methylotrophy and for enhancing methanol conversion to various useful products.

Methanol-dependent Escherichia coli strains with a complete ribulose monophosphate cycle

Methanol is a biotechnologically promising substitute for food and feed substrates since it can be produced renewably from electricity, water and CO2. Although progress has been made towards establishing Escherichia coli as a platform organism for methanol conversion via the energy efficient ribulose monophosphate (RuMP) cycle, engineering strains that rely solely on methanol as a carbon source remains challenging. Here, we apply flux balance analysis to comprehensively identify methanol-dependent strains with high potential for adaptive laboratory evolution. We further investigate two out of 1200 candidate strains, one with a deletion of fructose-1,6-bisphosphatase (fbp) and another with triosephosphate isomerase (tpiA) deleted. In contrast to previous reported methanol-dependent strains, both feature a complete RuMP cycle and incorporate methanol to a high degree, with up to 31 and 99% fractional incorporation into RuMP cycle metabolites. These strains represent ideal starting points for evolution towards a fully methylotrophic lifestyle.

Regulatory interventions improve the biosynthesis of limiting amino acids from methanol carbon to improve synthetic methylotrophy in Escherichia coli

Synthetic methylotrophy aims to engineer methane and methanol utilization pathways in platform hosts like Escherichia coli for industrial bioprocessing of natural gas and biogas. While recent attempts to engineer synthetic methylotrophs have proved successful, autonomous methylotrophy, that is, the ability to utilize methane or methanol as sole carbon and energy substrates, has not yet been realized. Here, we address an important limitation of autonomous methylotrophy in E. coli: the inability of the organism to synthesize several amino acids when grown on methanol. We targeted global and local amino acid regulatory networks. Those include removal of amino acid allosteric feedback inhibition (argA^H15Y , ilvA^L447F , hisG^E271K , leuA^G462D , proB^D107N , thrA^S345F , trpE^S40F ), knockouts of transcriptional repressors (ihfA, metJ); and overexpression of amino acid biosynthetic operons (hisGDCBHAFI, leuABCD, thrABC, trpEDCBA) and transcriptional regulators (crp, purR). Compared to the parent methylotrophic E. coli strain that was unable to synthesize these amino acids from methanol carbon, these strategies resulted in improved biosynthesis of limiting proteinogenic amino acids (histidine, leucine, lysine, methionine, phenylalanine, threonine, tyrosine) from methanol carbon. In several cases, improved amino acid biosynthesis from methanol carbon led to improvements in methylotrophic growth in methanol minimal medium supplemented with a small amount of yeast extract. This study addresses a key limitation currently preventing autonomous methylotrophy in E. coli and possibly other synthetic methylotrophs and provides insight as to how this limitation can be alleviated via global and local regulatory modifications.

Enhancement of S-Adenosylmethionine-Dependent Methylation by Integrating Methanol Metabolism with 5-Methyl-Tetrahydrofolate Formation in Escherichia coli

S-Adenosylmethionine (SAM)-dependent methyltransferases are important tools for the biocatalytic methylation of diverse biomolecules. Methylation by a whole-cell biocatalyst allows the utilization of intrinsic SAM and its regeneration system, which consists of a cyclic and multi-step enzymatic cascade. However, low intracellular availability of 5-methyl-tetrahydrofolate (5-methyl-THF), which functions as a methyl group donor, limits SAM regeneration. Here, we integrated methanol metabolism with 5-methyl-THF formation into SAM-dependent methylation system in Escherichia coli, driven by heterologously expressed methanol dehydrogenase (MDH). The coupling of MDH-catalyzed methanol oxidation with the E. coli endogenous reactions enhances the formation of 5-methyl-THF using methanol as a source of methyl group, thereby promoting both the SAM regeneration and methylation reactions. Co-expression of the mutant MDH2 from Cupriavidus necator N-1 with the O-methyltransferase 5 from Streptomyces avermitilis MA-4680 enhanced O-methylation of esculetin 1.4-fold. Additional overexpression of the E. coli endogenous 5,10-methylene-THF reductase, which catalyzes the last step of 5-methyl-THF formation, further enhanced the methylation reaction by 1.9-fold. Together with deregulation of SAM biosynthesis, the titer of methylated compounds was increased about 20-fold (from 0.023 mM to 0.44 mM). The engineered E. coli strain with enhanced 5-methyl-THF formation is now available as a chassis strain for the production of a variety of methylated compounds.

Converting Escherichia coli to a Synthetic Methylotroph Growing Solely on Methanol

Methanol, being electron rich and derivable from methane or CO₂, is a potentially renewable one-carbon (C1) feedstock for microorganisms. Although the ribulose monophosphate (RuMP) cycle used by methylotrophs to assimilate methanol differs from the typical sugar metabolism by only three enzymes, turning a non-methylotrophic organism to a synthetic methylotroph that grows to a high cell density has been challenging. Here we reprogrammed E. coli using metabolic robustness criteria followed by laboratory evolution to establish a strain that can efficiently utilize methanol as the sole carbon source. This synthetic methylotroph alleviated a so far uncharacterized hurdle, DNA-protein crosslinking (DPC), by insertion sequence (IS)-mediated copy number variations (CNVs) and balanced the metabolic flux by mutations. Being capable of growing at a rate comparable with natural methylotrophs in a wide range of methanol concentrations, this synthetic methylotrophic strain illustrates genome editing and evolution for microbial tropism changes and expands the scope of biological C1 conversion.

An "energy-auxotroph" Escherichia coli provides an in vivo platform for assessing NADH regeneration systems

An efficient in vivo regeneration of the primary cellular resources NADH and ATP is vital for optimizing the production of value-added chemicals and enabling the activity of synthetic pathways. Currently, such regeneration routes are tested and characterized mainly in vitro before being introduced into the cell. However, in vitro measurements could be misleading as they do not reflect enzyme activity under physiological conditions. Here, we construct an in vivo platform to test and compare NADH regeneration systems. By deleting dihydrolipoyl dehydrogenase in Escherichia coli, we abolish the activity of pyruvate dehydrogenase and 2-ketoglutarate dehydrogenase. When cultivated on acetate, the resulting strain is auxotrophic to NADH and ATP: acetate can be assimilated via the glyoxylate shunt but cannot be oxidized to provide the cell with reducing power and energy. This strain can, therefore, serve to select for and test different NADH regeneration routes. We exemplify this by comparing several NAD-dependent formate dehydrogenases and methanol dehydrogenases. We identify the most efficient enzyme variants under in vivo conditions and pinpoint optimal feedstock concentrations that maximize NADH biosynthesis while avoiding cellular toxicity. Our strain thus provides a useful platform for comparing and optimizing enzymatic systems for cofactor regeneration under physiological conditions.

Mixing and matching methylotrophic enzymes to design a novel methanol utilization pathway in E. coli

One-carbon (C1) compounds, such as methanol, have recently gained attention as alternative low-cost and non-food feedstocks for microbial bioprocesses. Considerable research efforts are thus currently focused on the generation of synthetic methylotrophs by transferring methanol assimilation pathways into established bacterial production hosts. In this study, we used an iterative combination of dry and wet approaches to design, implement and optimize this metabolic trait in the most common chassis, E. coli. Through in silico modelling, we designed a new route that "mixed and matched" two methylotrophic enzymes: a bacterial methanol dehydrogenase (Mdh) and a dihydroxyacetone synthase (Das) from yeast. To identify the best combination of enzymes to introduce into E. coli, we built a library of 266 pathway variants containing different combinations of Mdh and Das homologues and screened it using high-throughput ¹³C-labeling experiments. The highest level of incorporation of methanol into central metabolism intermediates (e.g. 22% into the PEP), was obtained using a variant composed of a Mdh from A. gerneri and a codon-optimized version of P. angusta Das. Finally, the activity of this new synthetic pathway was further improved by engineering strategic metabolic targets identified using omics and modelling approaches. The final synthetic strain had 1.5 to 5.9 times higher methanol assimilation in intracellular metabolites and proteinogenic amino acids than the starting strain did. Broadening the repertoire of methanol assimilation pathways is one step further toward synthetic methylotrophy in E. coli.

Adaptive laboratory evolution enhances methanol tolerance and conversion in engineered Corynebacterium glutamicum

Synthetic methylotrophy has recently been intensively studied to achieve methanol-based biomanufacturing of fuels and chemicals. However, attempts to engineer platform microorganisms to utilize methanol mainly focus on enzyme and pathway engineering. Herein, we enhanced methanol bioconversion of synthetic methylotrophs by improving cellular tolerance to methanol. A previously engineered methanol-dependent Corynebacterium glutamicum is subjected to adaptive laboratory evolution with elevated methanol content. Unexpectedly, the evolved strain not only tolerates higher concentrations of methanol but also shows improved growth and methanol utilization. Transcriptome analysis suggests increased methanol concentrations rebalance methylotrophic metabolism by down-regulating glycolysis and up-regulating amino acid biosynthesis, oxidative phosphorylation, ribosome biosynthesis, and parts of TCA cycle. Mutations in the O-acetyl-l-homoserine sulfhydrylase Cgl0653 catalyzing formation of l-methionine analog from methanol and methanol-induced membrane-bound transporter Cgl0833 are proven crucial for methanol tolerance. This study demonstrates the importance of tolerance engineering in developing superior synthetic methylotrophs.

Wang et al. improve the methanol tolerance for the synthetic methylotroph, Corynebacterium glutamicum. They generate 3 new strains by directed evolution and use biochemical, transcriptomic, and genetic approaches to characterize the pathways underlying the enhanced methanol metabolism. Their findings are important for biomanufacturing purposes.

Triggering the stringent response enhances synthetic methanol utilization in Escherichia coli

Synthetic methylotrophy aims to engineer methane and methanol utilization pathways in platform hosts like Escherichia coli for industrial bioprocessing of natural gas and biogas. While recent attempts to engineer synthetic methylotrophs have proved successful, autonomous methylotrophy, i.e. the ability to utilize methane or methanol as sole carbon and energy substrates, has not yet been realized. Here, we address an important limitation of autonomous methylotrophy in E. coli: the inability of the organism to synthesize several amino acids when grown on methanol. By activating the stringent/stress response via ppGpp overproduction, or DksA and RpoS overexpression, we demonstrate improved biosynthesis of proteinogenic amino acids via endogenous upregulation of amino acid synthesis pathway genes. Thus, we were able to achieve biosynthesis of several limiting amino acids from methanol-derived carbon, in contrast to the control methylotrophic E. coli strain. This study addresses a key limitation currently preventing autonomous methylotrophy in E. coli and possibly other synthetic methylotrophs and provides insight as to how this limitation can be alleviated via stringent/stress response activation.

Discovery and Biochemical Characterization of a Methanol Dehydrogenase From Lysinibacillus xylanilyticus

Bioconversion of C1 chemicals such as methane and methanol into higher carbon-chain chemicals has been widely studied. Methanol oxidation catalyzed by methanol dehydrogenase (Mdh) is one of the key steps in methanol utilization in bacterial methylotrophy. In bacteria, few NAD⁺-dependent Mdhs have been reported that convert methanol to formaldehyde. In this study, an uncharacterized Mdh gene from Lysinibacillus xylanilyticus (Lxmdh) was cloned and expressed in Escherichia coli. The maximum alcohol oxidation activity of the recombinant enzyme was observed at pH 9.5 and 55°C in the presence of 10 mM Mg²⁺. To improve oxidation activity, rational approach-based, site-directed mutagenesis of 16 residues in the putative active site and NAD⁺-binding region was performed. The mutations S101V, T141S, and A164F improved the enzyme’s specific activity toward methanol compared to that of the wild-type enzyme. These mutants show a slightly higher turnover rate than that of wild-type, although their K_M values were increased compared to that of wild-type. Consequently, according the kinetic results, S101, T141, and A164 positions may related to the catalytic activity in the active site for methanol dehydrogenation. It should be further studied other mutant variants with high activity for methanol. In conclusion, we characterized a new Lxmdh and its variants that may be potentially useful for the development of synthetic methylotrophy in the future.

Growth of E. coli on formate and methanol via the reductive glycine pathway

Engineering a biotechnological microorganism for growth on one-carbon intermediates, produced from the abiotic activation of CO₂, is a key synthetic biology step towards the valorization of this greenhouse gas to commodity chemicals. Here we redesign the central carbon metabolism of the model bacterium Escherichia coli for growth on one-carbon compounds using the reductive glycine pathway. Sequential genomic introduction of the four metabolic modules of the synthetic pathway resulted in a strain capable of growth on formate and CO₂ with a doubling time of ~70 h and growth yield of ~1.5 g cell dry weight (gCDW) per mol-formate. Short-term evolution decreased doubling time to less than 8 h and improved biomass yield to 2.3 gCDW per mol-formate. Growth on methanol and CO₂ was achieved by further expression of a methanol dehydrogenase. Establishing synthetic formatotrophy and methylotrophy, as demonstrated here, paves the way for sustainable bioproduction rooted in CO₂ and renewable energy.

Synthetic Methylotrophy: A Practical Solution for Methanol-Based Biomanufacturing

The increasing availability and affordability of natural gas has renewed interest in using methanol for bioproduction of useful chemicals. Engineering synthetic methylotrophy based on natural or artificial methanol assimilation pathways and genetically tractable platform microorganisms for methanol-based biomanufacturing is drawing particular attention. Recently, intensive efforts have been devoted to demonstrating the feasibility and improving the efficiency of synthetic methylotrophy. Various fuel, bulk, and fine chemicals have been synthesized using methanol as a feedstock. However, fully synthetic methylotrophs utilizing methanol as the sole carbon source and commercially viable bioproduction from methanol remain to be developed. Here, we review ongoing efforts to identify limiting factors, optimize synthetic methylotrophs, and implement methanol-based biomanufacturing. Future challenges and prospects are also discussed.

Improving synthetic methylotrophy via dynamic formaldehyde regulation of pentose phosphate pathway genes and redox perturbation

Escherichia coli is an ideal choice for constructing synthetic methylotrophs capable of utilizing the non-native substrate methanol as a carbon and energy source. All current E. coli-based synthetic methylotrophs require co-substrates. They display variable levels of methanol-carbon incorporation due to a lack of native regulatory control of biosynthetic pathways, as E. coli does not recognize methanol as a proper substrate despite its ability to catabolize it. Here, using the E. coli formaldehyde-inducible promoter P_frm, we implement dynamic expression control of select pentose-phosphate genes in response to the formaldehyde produced upon methanol oxidation. Genes under P_frm control exhibited 8- to 30-fold transcriptional upregulation during growth on methanol. Formaldehyde-induced episomal expression of the B. methanolicus rpe and tkt genes involved in the regeneration of ribulose 5-phosphate required for formaldehyde fixation led to significantly improved methanol assimilation into intracellular metabolites, including a 2-fold increase of ¹³C-methanol into glutamate. Using a simple strategy for redox perturbation by deleting the E. coli NAD-dependent malate dehydrogenase gene maldh, we demonstrate 5-fold improved biomass formation of cells growing on methanol in the presence of a small concentration of yeast extract. Further improvements in methanol utilization are achieved via adaptive laboratory evolution and heterologous rpe and tkt expression. A short-term in vivo¹³C-methanol labeling assay was used to determine methanol assimilation activity for Δmaldh strains, and demonstrated dramatically higher labeling in intracellular metabolites, including a 6-fold and 1.8-fold increase in glycine labeling for the rpe/tkt and evolved strains, respectively. The combination of formaldehyde-controlled pentose phosphate pathway expression and redox perturbation with the maldh knock-out greatly improved both growth benefit with methanol and methanol carbon incorporation into intracellular metabolites.

Synthetic methylotrophy: Strategies to assimilate methanol for growth and chemicals production

Methanol is an attractive and broadly available substrate for large-scale bioproduction of fuels and chemicals. It contains more energy and electrons per carbon than carbohydrates and can be cheaply produced from natural gas. Synthetic methylotrophy refers to the development of non-native methylotrophs such as Escherichia coli and Corynebacterium glutamicum to utilize methanol as a carbon source. Here, we discuss recent advances in engineering these industrial hosts to assimilate methanol for growth and chemicals production through the introduction of the ribulose monophosphate (RuMP) cycle. In addition, we present novel strategies based on flux coupling and adaptive laboratory evolution to engineer new strains that can grow exclusively on methanol.

Phage-Assisted Evolution of Bacillus methanolicus Methanol Dehydrogenase 2

Synthetic methylotrophy, the modification of organisms such as E. coli to grow on methanol, is a longstanding goal of metabolic engineering and synthetic biology. The poor kinetic properties of NAD-dependent methanol dehydrogenase, the first enzyme in most methanol assimilation pathways, limit pathway flux and present a formidable challenge to synthetic methylotrophy. To address this bottleneck, we used a formaldehyde biosensor to develop a phage-assisted noncontinuous evolution (PANCE) selection for variants of Bacillus methanolicus methanol dehydrogenase 2 (Bm Mdh2). Using this selection, we evolved Mdh2 variants with up to 3.5-fold improved V_max. The mutations responsible for enhanced activity map to the predicted active site region homologous to that of type III iron-dependent alcohol dehydrogenases, suggesting a new critical region for future methanol dehydrogenase engineering strategies. Evolved Mdh2 variants enable twice as much ¹³C-methanol assimilation into central metabolites than previously reported state-of-the-art methanol dehydrogenases. This work provides improved Mdh2 variants and establishes a laboratory evolution approach for metabolic pathways in bacterial cells.

Methanol fermentation increases the production of NAD(P)H-dependent chemicals in synthetic methylotrophic Escherichia coli

BACKGROUND

Methanol has attracted increased attention as a non-food alternative carbon source to sugar for biological production of chemicals and fuels. Moreover, the high degree of reduction of methanol offers some advantages in increasing the production yields of NAD(P)H-dependent metabolites. Here, we demonstrate an example of methanol bioconversion with the aim of improving production of NAD(P)H-dependent chemicals in synthetic methylotrophic Escherichia coli.

RESULTS

A synthetic methylotrophic E. coli was engineered with a nicotinamide adenine dinucleotide (NAD⁺)-dependent methanol dehydrogenase (MDH) and ribulose monophosphate (RuMP) pathway. Regarding the limited MDH activity, the role of activator proteins in vivo was investigated, and the NudF protein was identified capable of improving MDH activity and triggering increased methanol metabolism. Using ¹³C-methanol-labeling experiments, we confirmed methanol assimilation in the methylotrophic E. coli. A cycling RuMP pathway for methanol assimilation was also demonstrated by detecting multiple labeled carbons for several compounds. Finally, using the NAD(P)H-dependent metabolite lysine as a test, the potential of methanol bioconversion to generate value-added metabolites was determined. To further characterize the benefit of methanol as the carbon source, extra NADH from methanol oxidation was engineered to generate NADPH to improve lysine biosynthesis by expression of the POS5 gene from Saccharomyces cerevisiae, which resulted in a twofold improvement of lysine production. Moreover, this new sink further pulled upstream methanol utilization.

CONCLUSION

Through engineering methanol metabolism, lysine biosynthesis, and NADPH regeneration pathway from NADH, the bioconversion of methanol to improve chemical synthesis was successfully achieved in methylotrophic E. coli.