The rapid degradation of bisphenol A induced by the response of indigenous bacterial communities in sediment

Deciphering Bisphenol A degradation by Coelastrella sp. M60: unravelling metabolic insights through metabolomics analysis

Microalgae, owing to their efficacy and eco-friendliness, have emerged as a promising solution for mitigating the toxicity of Bisphenol A (BPA), a hazardous environmental pollutant. This current study was focused on the degradation of BPA by Coelastrella sp. M60 at various concentrations (10-50 mg/L). Further, the metabolic profiling of Coelastrella sp. M60 was performed using GC-MS analysis, and the results were revealed that BPA exposure modulated the metabolites profile with the presence of intermediates of BPA. In addition, highest lipid (43%) and pigment content (40%) at 20 and 10 mg/L of BPA respectively exposed to Coelastrella sp. M60 was achieved and enhanced fatty acid methyl esters recovery was facilitated by Cuprous oxide nanoparticles synthesised using Spatoglossum asperum. Thus, this study persuades thepotential of Coelastrella sp. M60 for BPA degradation and suggesting new avenues to remove the emerging contaminants in polluted water bodies and targeted metabolite expression in microalgae.

Food grade plastics and Bisphenol A: Associated risks, toxicity, and bioremediation approaches

Bisphenols' widespread use in day to day life has enabled its existence in various compartments of the environment. Bisphenol A (BPA) is utilized as a monomer in manufacturing polycarbonate plastics, epoxy resins, as well as flame retardants and is also considered as an endocrine disruptor. This study focuses on determining BPA concentration in daily-use food-grade plastic containers, in addition to its toxicity evaluation in environmental samples contaminated by BPA leachates. The highest concentration of BPA was observed in black poly bags (42.78 ppm), followed by slice juice bottles and infant milk bottles. Toxicity tests revealed significant impacts on Rhizobium and Chlorella sp. as a representative species of soil and aquatic environment respectively. To biodegrade the BPA, two potential strains, Brucella sp. and Brevibacillus parabrevis, were isolated from a landfill site. Qualitative and quantitative evaluation of biodegraded BPA through U-HPLC and GC-MSMS showed various metabolites of BPA. Results indicate the native bacterial isolates as potential candidates for BPA degradation while transforming this contaminant to a less toxic and hazardous form. The study also proposes the risk associated with food-grade plastic containers and recommends to establish a sustainable way for plastic waste management.

Catalytic ozonation of bisphenol A by Cu/Mn@γ-Al2O3: Performance evaluation and mechanism insight

Herein, an alumina-based bimetallic catalyst (Cu1Mn7@γ-Al2O3) was synthesized for bisphenol A (BPA) degradation in the catalytic ozonation process. The catalytic ozonation system could degrade 93.9% of BPA within 30 min under the conditions of pH = 7.0, 10 mg L-1 O3 concentration, and 24 g L-1 catalyst dosage compared to ozone alone (21.0%). The enhanced BPA degradation efficiency was attributed to the abundant catalytic sites and synergistic effects of Cu and Mn. The results revealed that the synergistic interaction between Cu and Mn effectively accelerated the electron transfer process on the catalyst surface, thus promoting the generation of reactive oxygen species (ROS). Further studies indicated that the BPA degradation in Cu1Mn7@γ-Al2O3/O3 system predominantly followed the ·OH and O2·- oxidation pathway. Based on the density functional theory (DFT) calculations and intermediates detected by LC-MS analysis, two pathways for BPA degradation in the Cu1Mn7@γ-Al2O3/O3 system were proposed. The toxicity estimation illustrated that the toxicity of BPA and its byproducts was effectively reduced in the Cu1Mn7@γ-Al2O3/O3 system. This work provides a new protocol for O3 activation and pollutant elimination through a novel bimetallic catalyst during water purification.

Research Progress of Methods for Degradation of Bisphenol A

Bisphenol A (BPA), an endocrine disruptor widely used in industrial production, is found in various environmental sources. Despite numerous reports on BPA degradation and removal, the details remain unclear. This paper aims to address this gap by providing a comprehensive review of BPA degradation methods, focusing on biological, physical, and chemical treatments and the factors that affect the degradation of BPA. Firstly, the paper uses VOSviewer software (version 1.6.15) to map out the literature on BPA degradation published in the past 20 years, which reveals the trends and research focus in this field. Next, the advantages and limitations of different BPA degradation methods are discussed. Overall, this review highlights the importance of BPA degradation to protect the environment and human health. The paper provides significant insights for researchers and policymakers to develop better approaches for BPA degradation and removal.

Effect of the inoculation of Phanerochaete chrysosporium on nitrogen migration and organic matter conversion during electrolytic manganese residue composting

Composting has made it practicable to dispose electrolytic manganese residues (EMR) in a less toxic way, nevertheless, the decomposition and the loss of nitrogen is a critical issue. This study aimed to investigate the role of Phanerochaete chrysosporium (PC) inoculation on nitrogen migration and promotion of decomposing organic matter (OM), as well as the effect on bacterial community structure during EMR composting. The results exhibited that nitrogen loss tallied with the first-order kinetic model. PC inoculation increased the relative microbial abundance of Firmicutes, which improved the efficiency of nitrogen nitrification and OM degradation, and increased the germination index and total nitrogen content by 13.8% and 2.95 g/kg, respectively. Moreover, aromatic benzenes replaced heteropolysaccharides, alcohols and ethers as the main components of OM in fertilizer, leading up to a more stable humus structure. This study provides a rationale and a novel perspective on the resource and nutrient conservation of EMR-contaminated soils.

Effect of Phanerochaete chrysosporium inoculation on manganese passivation and microbial community succession during electrical manganese residue composting

Electrolytic manganese residue poses potentially threats to the environment and therefore needs eco-friendly treatment. Composting has been reported to effectively passivate heavy metals and alleviate their ecotoxicity. Observation of the Mn concentration during composting indicated that the mobility of Mn was significantly reduced, with the easily extraction fraction (acid extractable and easily reduction fraction) of Mn in the control pile (pile 1 without Phanerochaete chrysosporium inoculation) and treat pile (pile 2 with Phanerochaete chrysosporium inoculation) decreasing by 17% and 29%, respectively. The inoculation of Phanerochaete chrysosporium prompted the passivation of manganese, prolonged the thermophilic period, and enriched the microbial community structure, which was attributed to the rapid growth and reproduction of thermophilic bacteria. Moreover, Phanerochaete chrysosporium inoculation promoted the effect of pH on the stabilization of Mn, but the opposite contribution of organic matter. This study would provide a new perspective for remediating EMR contaminated soil via composting.

Laccase-functionalized magnetic framework composite enabled chlorophenols degradation, a potential remediation for fungicides residues in leather

Abstract

Chlorophenols, used as the fungicides in leather, are strictly limited in leather products. In this work, a metal–organic framework material, zeolitic metal azolate framework-7 (MAF-7), was first used to encapsulate laccase (Lac) to prepare MAF-7/Lac bio-composites with 98.5% immobilization yield. Afterward, Lac/MNP@MOM was formed by introducing the magnetic nanoparticles (MNPs) into the Lac@MOM. MAF-7 with better hydrophilicity and stronger pH buffering ability, exhibits good compatibility with laccase, which can reserve the activity of laccase after immobilization. Moreover, the porous structure of MAF-7 is favorable for the sufficient contact between laccase and substrates. Lac/MNP@MOM exhibited excellent activity when exposed to high temperature, extreme pH, and organic solvents, which also simplified complex recovery steps. Furthermore, the degradation rate of 2,4-dichlorophenol (2,4-DCP) could reach as high as 97% within 24 h by immobilized laccase, and after nine consecutive cycles of operation, enzyme activity could remain over 80%, which gives it the potential for practical applications.

Graphical abstract

Bacterial degradation of bisphenol analogues: an overview

Bisphenol A (BPA) is one of the most produced synthetic monomers in the world and is widespread in the environment. BPA was replaced by bisphenol analogues (BP) because of its adverse effects on life. Bacteria can degrade BPA and other bisphenol analogues (BP), diminishing their environmental concentrations. This study aimed to summarize the knowledge and contribute to future studies. In this review, we surveyed papers on bacterial degradation of twelve different bisphenol analogues published between 1987 and June 2022. A total of 102 original papers from PubMed and Google Scholar were selected for this review. Most of the studies (94.1%, n = 96) on bacterial degradation of bisphenol analogues focused on BPA, and then on bisphenol F (BPF), and bisphenol S (BPS). The number of studies on bacterial degradation of bisphenol analogues increased more than six times from 2000 (n = 2) to 2021 (n = 13). Indigenous microorganisms and the genera Sphingomonas, Sphingobium, and Cupriavidus could degrade several BP. However, few studies focussed on Cupriavidus. The acknowledgement of various aspects of BP bacterial biodegradation is vital for choosing the most suitable microorganisms for the bioremediation of a single BP or a mixture of BP.

Trends and thresholds on bacterial degradation of bisphenol-A endocrine disruptor - a concise review

Bisphenol-A (BPA) is a monomer found in polycarbonate plastics, food cans, and other everyday chemicals; this monomer and its counterparts are widely used, culminating in its presence in water, soil, sediment, and the atmosphere. Furthermore, because of its estrogenic and genotoxic properties, it has been acknowledged as an endocrine disruptor; contamination of BPA in the environment is becoming a growing concern, and ways to effectively mitigate BPA from the environment are currently explored. Hence, the focal point of the review is to collate the bacterial degradation of BPA with the proposed degradation mechanism, explicitly focusing on researches published between 2017 and 2022. BPA breakdown is dependent primarily on bacterial metabolism, although numerous factors influence its fate in the environment. The metabolic routes for BPA breakdown in crucial bacterial strains were postulated, sourced on the transformed metabolite-intermediates perceived through degradation; enzymes and genes associated with the bacterial degradation of BPA have also been included in this review. This review will be momentous to generate a conceptual strategy and stimulate the progress on bacterial mitigation of BPA as a path to a sustainable cleaner environment.

The response of anaerobic ammonium oxidation process to bisphenol-A: Linking reactor performance to microbial community and functional gene

As a typical endocrine disruptor, bisphenol A (BPA) has been widely detected in various water bodies. Although the influence of BPA on traditional biological treatment system has been investigated, it is not clear whether it has potential impact on anaerobic ammonium oxidation (anammox) process. The short- and long-term influences of BPA on reactor operational performance, sludge characteristics and microbial community were investigated in this study. Results revealed that 1 and 3 mg L^-1 BPA exhibited a limited adverse impact on granular sludge reactor performance. However, exposure of sludge under 10 mg L^-1 BPA would cause an obvious inhibition on nitrogen removal rate from 10.3 ± 0.2 to 7.6 ± 0.4 kg N m^-3 d^-1. BPA would affect granular sludge metabolic substance excretion and lead to effluent dissolved organic content increase. Both the microbial community and redundancy analysis showed that BPA exhibited a negative influence on Ca. Kuenenia but a positive correlation with SBR1031. Low BPA concentration appeared a limited impact on functional genes while 10 mg L^-1 BPA would cause decline of hzsA and hdh abundances. The results of this work might be valuable for in-depth understanding the potential influence of endocrine disruptor on anammox sludge.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.

Metagenomic analysis of microbial communities continuously exposed to Bisphenol A in mangrove rhizosphere and non-rhizosphere soils

Bisphenol A (BPA) is widely distributed in littoral zones and may cause adverse impacts on mangrove ecosystem. Biodegradation and phytoremediation are two primary processes for BPA dissipation in mangrove soils. However, the rhizosphere effects of different mangrove species on BPA elimination are still unresolved. In this study, three typical mangrove seedlings, namely Avicennia marina, Bruguiera gymnorrhiza (L.) and Aegiceras corniculatum, were cultivated in soil microcosms for four months and then subjected to 28-day continuous BPA amendment. Un-planted soil microcosms (as control) were also set up. The BPA residual rates and root exudates were monitored, and the metabolic pathways as well as functional microbial communities were also investigated to decipher the rhizosphere effects based on metagenomic analysis. The BPA residual rates in all planted soils were significantly lower than that in un-planted soil on day 7. Both plantation and BPA dosage had significant effects on bacterial abundance. A distinct separation of microbial structure was found between planted and un-planted soil microcosms. Genera Pseudomonas and Lutibacter got enriched with BPA addition and may play important roles in BPA biodegradation. The shifts in bacterial community structure upon BPA addition were different among the microcosms with different mangrove species. Genus Novosphingobium increased in Avicennia marina and Bruguiera gymnorrhiza (L.) rhizosphere soils but decreased in Aegiceras corniculatum rhizosphere soil. Based on KEGG annotation and binning analysis, the proposal of BPA degradation pathways and the quantification of relevant functional genes were achieved. The roles of Pseudomonas and Novosphingobium may differ in lower BPA degradation pathways. The quantity variation patterns of functional genes during the 28-day BPA amendment were different among soil microcosms and bacterial genera.

Efficient catalytic ozonation of bisphenol A by three-dimensional mesoporous CeOx-loaded SBA-16

Herein, we demonstrated the construction of three-dimensional (3D) cerium oxide (CeO_x)/SBA-16 nanocomposites for efficient removal of bisphenol A (BPA) via a catalytic ozonation, with a high BPA mineralization up to 60.9% in 90 min. On one hand, the CeO_x/SBA-16 mesoporous structured materials presented large surface area and uniform pore distribution, which was conducive to the adsorption of transformation by-products (TBPs) and then, the mass transfer. On the other hand, CeO_x/SBA-16 could enhance the ozone utilization efficiency and meanwhile facilitate the formation of OH, the main reactive oxygen species. Through the exploration of dissoluble organic matters and the identification of the reaction intermediates, two BPA degradation pathways were proposed. This approach reported here will benefit the design and construction of mesoporous structured materials for catalytic elimination of hazards to remediate the environment.

Bisphenol A removal and degradation pathways in microorganisms with probiotic properties

Bisphenol-A (BPA) is a constituent of polycarbonate plastics and epoxy resins, widely applied on food packaging materials. As BPA exposure results in health hazards, its efficient removal is of crucial importance. In our study five potentially probiotic microorganisms, namely Lactococcus lactis, Bacillus subtilis, Lactobacillus plantarum, Enterococcus faecalis, and Saccharomyces cerevisiae, were tested for their toxicity tolerance to BPA and their BPA removal ability. Although BPA toxicity, evident on all microorganisms, presented a correlation to both BPA addition time and its concentration, all strains exhibited BPA-removal ability with increased removal rate between 0 and 24 h of incubation. BPA degradation resulted in the formation of two dimer products in cells while the compounds Hydroquinone (HQ), 4-Hydroxyacetophenone (HAP), 4-Hydroxybenzoic acid (HBA) and 4-Isopropenylphenol (PP) were identified in the culture medium. In the proposed BPA degradation pathways BPA adducts formation appears as a common pattern, while BPA decomposition as well as the formation, and the levels of its end products present differences among microorganisms. The BPA degradation ability of the tested beneficial microorganisms demonstrates their potential application in the bioremediation of BPA contaminated foods and feeds and provides a means to suppress the adverse effects of BPA on human and animal health.

Bisphenol A biodegradation differs between mudflat and mangrove forest sediments

Bisphenol A (BPA) is one of the widely detected endocrine disrupting chemicals in coastal sediment. Biodegradation is a vital pathway of BPA elimination in sediment. However, the impact of vegetation on BPA degradation in coastal sediment is still unclear. In this study, the differences of BPA biodegradation and the functional microbial community and metabolic pathway were explored between mangrove forest and mudflat sediments. A nearly complete BPA attenuation was detected in 4 days in mudflat sediment but 8 days in forest sediment. Bacterial abundance varied greatly in different sediment types. Bacterial community structure changed with BPA biodegradation, dependent on sediment type. During the degradation, the proportions of Alphaproteobacteria and Gammaproteobacteria were higher in BPA amended microcosms than in un-amended microcosms. With BPA biodegradation, a substantial increase in Novosphingobium and Croceicoccus occurred in forest sediment and mudflat sediment, respectively. Additionally, two divergent BPA biodegradation pathways were proposed based on functional annotation and KEGG pathway database. The abundance of functional genes also varied with BPA biodegradation, dependent on sediment type. Gene pcaGH decreased, while genes ligK and pcaD increased in both sediment types. Gene pcaB showed a remarkable increase in forest sediment but a decrease in mudflat sediment. Therefore, BPA degradation and the associated microbial community and metabolic pathway differed between mudflat and mangrove forest sediments.

Adsorption behavior of engineered carbons and carbon nanomaterials for metal endocrine disruptors: Experiments and theoretical calculation

Adsorption behaviors and mechanisms of metal endocrine disruptors (Pb²⁺, Cd²⁺, and Hg²⁺) by pyrogenic carbonaceous materials including engineered carbons (biochar and activated carbon) and carbon nanomaterials (multi-walled carbon nanotubes and graphene oxide) have been investigated by experimental and density functional theory (DFT) studies. The adsorption isotherms of metal endocrine disruptors on carbonaceous materials were better fitted by Langmuir models. The adsorption capacities were in the order as follows: GO > BC600 > BC300 > CNT > AC for Pb²⁺, GO > BC300 > AC > BC600 > CNT for Cd²⁺, and GO > BC300 ≥ AC > CNT > BC600 for Hg²⁺, respectively. The DFT-computed binding energy (kcal/mol) of different oxygen-containing functional groups with metal endocrine disruptors followed the orders: (ⅰ) CMCOCPb (-136.70) > CM-COO^--Pb (-91.58) > CMCOPb (-33.57) > CMOHPb (-4.69), (ⅱ) CM-COO^--Cd (-45.91) > CMCOCCd (-4.49) > CMOHCd (-3.68) > CMCOCd (1.08), (ⅲ) CM-COO^--Hg (-25.51) > CMCOCHg (-3.58) > CMOHHg (-0.63) > CMCOHg (0.23). And COC has the highest binding energy for Pb²⁺, whereas COC has much lower binding energy for Cd²⁺ and Hg²⁺. Comprehensively considering DFT calculations, competitive adsorption results and the cost analysis, this work may provide insights into the design of selective adsorbent for specific contaminant.

Effect of starvation on the nitrification performance of constructed rapid infiltration systems

Three constructed rapid infiltration (CRI) systems (C¹, C² and C³) were operated under 7, 14 and 21 days of continuous starvation, respectively. The effect of starvation on the ammonia removal efficiency (ARE), nitrite accumulation rate (NAR), bioactivity of nitrifiers and content of extracellular polymeric substances (EPS) was investigated. The results showed that the activity of nitrite-oxidizing bacteria (NOB) was higher than that of ammonia-oxidizing bacteria (AOB) in stabilization periods, leading to a complete nitrification in CRI systems. During starvation periods, the activity decay rates of AOB (k_AOB) for C¹, C² and C³ were 0.172 ± 0.008, 0.132 ± 0.009 and 0.128 ± 0.009 d^-1, respectively, and those of NOB (k_NOB) were 0.159 ± 0.005, 0.152 ± 0.009 and 0.150 ± 0.005 d^-1, respectively, implying that k_AOB was higher than k_NOB in a 7-day starvation period, while showing a contrasting result in a 14- or 21-day starvation period. When resuming wastewater supply, AOB activity as well as the ARE in C¹, C² and C³ gradually restored to their initial levels within 6, 10 and 23 days, respectively. However, NOB activity was unable to fully restore after a 14- or 21-day starvation period, causing the final NAR of C² and C³ to remain at 25% and 60%, respectively. Furthermore, EPS could be used as the source of carbon and energy for hungry microorganisms to guarantee the metabolic activity of living cells in a starvation environment. These findings could provide a theoretical foundation for operational optimization of CRI systems under starvation conditions.

Lignin peroxidase isoenzyme: a novel approach to biodegrade the toxic synthetic polymer waste

Fungal metabolites are playing an immense role in developing various sustainable waste treatment processes. The present study aimed at production and characterization of fungal lignin peroxidase (EC 1.11.1.14) with a potential to degrade Polyvinyl Chloride. Optimization studies revealed that the maximum enzyme production occurred at a temperature 25°C, pH 5 in the 4th week of the incubation period with fungal strain. Enzyme assay was performed to find out the dominating enzyme in the culture broth. The molecular weight of the enzyme was found to be 46 kDa. Partially purified lignin peroxidase from Phanerocheate chrysosporium was used for the degradation of PVC films. A significant reduction in the weight of PVC film was observed (31%) in shake flask experiment. FTIR spectra of the enzyme-treated plastic film revealed structural changes in the chemical composition, indicating a specific peak at 2943 cm^-1 that corresponded to alkenyl C-H stretch. Moreover, deterioration on the surface of PVC films was confirmed by Scanning Electron Microscopy tracked through activity assay for the lignin peroxidase. Extracellular lignin peroxidases from P. chrysosporium play a significant role in the degradation of complex polymeric compounds like PVC.

Evaluating the impact of bamboo biochar on the fungal community succession during chicken manure composting

The objective of this study was to investigate the fungal community succession and variations in chicken manure (CM) compost with different concentration of bamboo biochar (BB) as additive via the using of metagenomics method. The consequent obviously revealed that Chytridiomycota, Mucoromycota, Ascomycota and Basidiomycota were the dominant phylum, while Batrachochytrium, Funneliformis, Mucor, Phizophagus and Pyronema were the pre-dominant genera in each treatment. Redundancy analyses indicated that higher dosage of biochar applied treatments has significant correlation between fungal communities and environmental factors. The diversity of fungal community was analogous but the relative abundance (RA) was inconsistent among the all treatments. In addition, the principal component analysis was also confirmed that T5 and T6 treatments have considerably correlation than other treatments. However, the mean value of RA remained maximum in higher dosage of biochar blended treatments. Ultimately, the RA of different fungal genus and species were influenced in CM compost by the BB amendment.

Heterogeneous activation of peroxymonosulfate for bisphenol AF degradation with BiOI0.5Cl0.5

This study represents the first investigation on the application of peroxymonosulfate (PMS) for the degradation of bisphenol AF (BPAF) using halogen bismuth oxide composites (BiOI_0.5Cl_0.5). The hierarchical BiOI_0.5Cl_0.5 was successfully synthesized and systematically characterized with multifarious techniques including XRD, SEM, FTIR and XPS to investigate the morphology and physicochemical properties of the samples. Several parameters affecting the degradation efficiency including catalyst dosage, PMS loading, and pH value were elucidated. Inorganic ions such as HCO₃⁻ showed significant inhibition in the BiOI_0.5Cl_0.5/PMS process due to the quenching effect. The effect of various water matrices including tap water and surface water on the removal of BPAF was studied to indicate that the present reaction system shows great potential for cleaning BPAF waste water. Furthermore, the production of sulfate radicals and hydroxyl radicals was validated through radical quenching and ESR tests, thus a possible oxidation mechanism was proposed. Overall, these results reveal that the activation of PMS by the BiOI_0.5Cl_0.5/PMS system is an efficient and promising advanced oxidation technology for the treatment of BPAF-contaminated waters and wastewaters.

This study represents the first investigation on the application of peroxymonosulfate (PMS) for the degradation of bisphenol AF (BPAF) using halogen bismuth oxide composites (BiOI_0.5Cl_0.5).

Bisphenols: Application, occurrence, safety, and biodegradation mediated by bacterial communities in wastewater treatment plants and rivers

Numerous data indicate that most of bisphenols (BPs) are endocrine disrupters and exhibit cytotoxicity, neurotoxicity, genotoxicity and reproductive toxicity against vertebrates. Nevertheless, they are widely applied in material production what result in their ubiquitous occurrence in ecosystems. While BPA is the most frequently detected in environment, BPAF, BPF and BPS are also often found. Ecosystem particularly exposed to BPs pollution is industrial and municipal wastewater being a common source of BPA in river waters. Different techniques to remove BPs from these ecosystems have been applied, among which biodegradation seems to be the most effective. In this review the current state of knowledge in the field of BPs application, distribution in the environment, effects on animal and human health, and biodegradation mediated by bacterial populations in wastewater treatment plants and rivers is presented.

Effect of Phanerochaete chrysosporium inoculation on bacterial community and metal stabilization in lead-contaminated agricultural waste composting

The effects of Phanerochaete chrysosporium inoculation on bacterial community and lead (Pb) stabilization in composting of Pb-contaminated agricultural waste were studied. It was found that the bioavailable Pb was transformed to stable Pb after composting with inoculum of P. chrysosporium. Pearson correlation analysis revealed that total organic carbon (TOC) and carbon/nitrogen (C/N) ratio significantly (P<0.05) influenced the distribution of Pb fractions. The richness and diversity of bacterial community were reduced under Pb stress and increased after inoculation with P. chrysosporium. Redundancy analysis indicated that C/N ratio, total organic matter, temperature and soluble-exchangeable Pb were the significant parameters to affect the bacterial community structure, solely explained 14.7%, 11.1%, 10.4% and 8.3% of the variation in bacterial community composition, respectively. In addition, the main bacterial species, being related to organic matter degradation and Pb stabilization, were found. These findings will provide useful information for composting of heavy metal-contaminated organic wastes.