Auto-aggregation properties of a novel aerobic denitrifier Enterobacter sp. strain FL

Treatment of low-pH rubber wastewater using ureolytic bacteria and the production of calcium carbonate precipitate for soil stabilization

Rubber wastewater contains variable low pH with a high load of nutrients such as nitrogen, phosphorous, suspended solids, high biological oxygen demand (BOD), and chemical oxygen demand (COD). Ureolytic and biofilm-forming bacterial strains Bacillus sp. OS26, Bacillus cereus OS36, Lysinibacillus macroides ST13, and Burkholderia multivorans DF12 were isolated from rubber processing centres showed high urease activity. Microscopic analyses evaluated the structural organization of biofilm. Extracellular polymeric substances (EPS) matrix of the biofilm of the strains showed the higher abundance of polysaccharides and lipids which help in the attachment and absorption of nutrients. The functional groups of polysaccharides, proteins, and lipids present in EPS were revealed by ATR-FTIR and 1H NMR. A consortium composed of B. cereus OS36, L. macroides ST13, and B. multivorans DF12 showed the highest biofilm formation, and efficiently reduced 62% NH3, 72% total nitrogen, and 66% PO43-. This consortium also reduced 76% BOD, 61% COD, and 68% TDS. After bioremediation, the pH of the remediated wastewater increased to 11.19. To reduce the alkalinity of discharged wastewater, CaCl2 and urea were added for calcite reaction. The highest CaCO3 precipitate was obtained at 24.6 mM of CaCl2, 2% urea, and 0.0852 mM of nickel (Ni2+) as a co-factor which reduced the pH to 7.4. The elemental composition of CaCO3 precipitate was analyzed by SEM-EDX. XRD analysis of the bacterially-induced precipitate revealed a crystallinity index of 0.66. The resulting CaCO3 precipitate was used as soil stabilizer. The precipitate filled the void spaces of the treated soil, reduced the permeability by 80 times, and increased the compression by 8.56 times than untreated soil. Thus, CaCO3 precipitated by ureolytic and biofilm-forming bacterial consortium through ureolysis can be considered a promising approach for neutralization of rubber wastewater and soil stabilization.

Enhanced chromium and nitrogen removal by constructing a biofilm reaction system based on denitrifying bacteria preferential colonization theory

Understanding the developmental characteristics of microbial communities in biofilms is crucial for designing targeted functional microbial enhancements for the remediation of complex contamination scenarios. The strong prioritization effect of microorganisms confers the ability to colonize strains that arrive first dominantly. In this study, the auto-aggregating denitrifying bacterial Pseudomonas stutzeri strain YC-34, which has both nitrogen and chromium removal characteristics, was used as a biological material to form a stable biofilm system based on the principle of dominant colonization and biofortification. The effect of the biofilm system on nitrogen and chromium removal was characterized by measuring the changes in the quality of influent and effluent water. The pattern of biofilm changes was analyzed by measuring biofilm content and thickness and characterizing extracellular polymer substances (EPS). Further analysis of the biofilm microbiota characteristics and potential functions revealed the mechanism of strain YC-34 biofortified biofilm. The results revealed that the biofilm system formed could achieve 90.56% nitrate-nitrogen removal with an average initial nitrate-nitrogen concentration of 51.9 mg/L and 40% chromium removal with an average initial hexavalent chromium Cr(VI) concentration of 7.12 mg/L. The biofilm properties of the system were comparatively analyzed during the biofilm formation period, the fluctuation period of Cr(VI)-stressed water quality, and the stabilization period of Cr(VI)-stressed water quality. The biofilm system may be able to increase the structure of hydrogen bonds, the type of protein secondary structure, and the abundance of amino acid-like components in the EPS, which may confer biofilm tolerance to Cr(VI) stress and allow the system to maintain a stable biofilm structure. Furthermore, microbial characterization indicated an increase in microbial diversity in the face of chromium stress, with an increase in the abundance of nitrogen removal-associated functional microbiota and an increasing trend in the abundance of nitrogen transfer pathways. These results demonstrate that the biofilm system is stable in nitrogen and chromium removal. This bioaugmentation method may provide a new way for the remediation of heavy metal-polluted water bodies and also provides theoretical and application parameters for the popularization and application of biofilm systems.

Nitrogen removal intensification of biofilm through bioaugmentation with Methylobacterium gregans DC-1 during wastewater treatment

The increasing concern for environmental remediation has led to a search for effective methods to remove eutrophic nutrients. In this study, Methylobacterium gregans DC-1 was utilized to improve nitrogen removal in a sequencing batch biofilm reactor (SBBR) via aerobic denitrification. This bacterium has the extraordinary characteristics of strong auto-aggregation and a high ability to remove nitrogen efficiently, making it an ideal candidate for enhanced treatment of nitrogen-rich wastewater. This strain was used for the bioassessment of a test reactor (SBBRbio), which showed a shorter biofilm formation time compared to a control reactor (SBBRcon) without this strain inoculation. Moreover, the enhanced biofilm was enriched in TB-EPS and had a wider variety of protein secondary structures than SBBRcon. During the stabilization phase of SBBRbio, the EPS molecules showed the highest proportion of intermolecular hydrogen bonding. It is possible that bioaugmentation with this strain positively affects the structural stability of biofilm. At influent ammonia loadings of 100 and 150 mg. L-1, the average reduction of ammonia and nitrate-nitrogen was higher in the experimental system compared to the control system. Additionally, nitrite-N accumulation was lower and N2O production decreased compared to the control. Analysis of the microbial community structure demonstrated successful colonization in the bioreactor by a highly nitrogen-tolerant strain that efficiently removed inorganic nitrogen. These results illustrate the great potential of this type of denitrifying bacteria in the application of bioaugmentation systems.

Thauera sp. for efficient nitrate removal in continuous denitrifying moving bed biofilm reactor

Thauera is the most widely found dominant denitrifying genus in wastewater. In earlier study, MBBR augmented with a specially developed denitrifying five-membered bacterial consortium (DC5) where Thauera was found to be the most abundant and persistent genus. Therefore, to check the functional potential of Thauera in the removal of nitrate-containing wastewater in the present study Thauera sp.V14 one of the member of the consortium DC5 was used as the model organism. Thauera sp.V14 exhibited strong hydrophobicity, auto-aggregation ability, biofilm formation and denitrification ability, which indicated its robust adaptability short colonization and nitrate removal efficiency. Continuous reactor studies with Thauera sp.V14 in 10 L dMBBR showed 91% of denitrification efficiency with an initial nitrate concentration of 620 mg L-1 within 3 h of HRT. Thus, it revealed that Thauera can be employed as an effective microorganism for nitrate removal from wastewater based on its performance in the present studies.

Performance and characterization of snail adhesive mucus as a bioflocculant against toxic Microcystis

Toxic Microcystis blooms are widespread in aquatic bodies, posing major threats to aquatic and human life. Recently, bioflocculants have attracted considerable attention as a promising biomaterial for Microcystis management. In search of a novel organism that can produce an efficient bioflocculant for controlling harmful algae sustainably, the native gastropod Cipangopaludina chinensis was co-cultured continuously with toxic Microcystis under different initial algal cell densities. The bioflocculation effect of snail mucus on toxic Microcystis, microcystin removal, and toxin accumulation in snails was investigated. In addition, the properties of the adhesive mucus were characterized using microscopic, X-ray diffraction, infrared spectroscopy, and polysaccharide and proteome analyses. Microcystis cells were captured and flocculated by the snail mucus; removal efficiencies of up to 89.9% and 84.8% were achieved for microalgae and microcystin-leucine arginine (MC-LR), respectively, when co-cultured with C. chinensis for only one day. After nine-day exposure, less than 5.49 µg/kg DW microcystins accumulated in the snails, indicating safety for human consumption. The snail mucus contained 104.3 µg/mg protein and 72.7 µg/mg carbohydrate, which provide several functional groups beneficial for Microcystis bioflocculation. The main monosaccharide subunits of polysaccharides are galactose, galactosamine, glucosamine, fucose, glucose, and mannose. Most of them are key components of polysaccharides in many bioflocculants. Gene Ontology analysis indicated the protein enrichment in binding processes and catalytic activity, which may account for Microcystis bioflocculation via protein binding or enzymatic reactions. The findings indicate that native C. chinensis secretes adhesive mucus that can act as bioflocculant for toxic Microcystis from ambient water and can be an effective and eco-friendly tool for Microcystis suppression.

Removal of nitrate nitrogen by Pseudomonas JI-2 under strong alkaline conditions: Performance and mechanism

The nitrate nitrogen removal characteristics of Pseudomonas JI-2 under strong alkaline conditions and the composition and functional groups of extracellular polymeric substance were analyzed. Furthermore, nontargeted metabonomics and bioinformatics technology were used to investigate the alkaline tolerance mechanism. JI-2 removed 11.05 mg N/(L·h) of nitrate with the initial pH, carbon to nitrogen ratio and temperature were 11.0, 8 and 25 °C respectively. Even when the pH was maintained at 11.0, JI-2 could still effectively remove nitrate. JI-2 contains a large number of Na+/H+ antiporters, such as Mrp, Mnh (mnhACDEFG) and Pha (phaACDEFG), which can stabilize the intracellular acid-base environment, and SlpA can enable quick adaptation to alkaline conditions. Moreover, JI-2 responds to the strong alkaline environment by secreting more polysaccharides, acidic functional groups and compatible solutes and regulating key metabolic processes such as pantothenate and CoA biosynthesis and carbapenem biosynthesis. Therefore, JI-2 can survive in strong alkaline environments and remove nitrate efficiently.

The shock of benzalkonium chloride on aerobic granular sludge system and its microbiological mechanism

Quaternary ammonium compounds (QACs) are a kind of biocides and surfactants widely used around the world and wastewater treatment systems were identified as its largest pool. QACs could significantly inhibit microbial activity in biological treatment. Aerobic granular sludge (AGS) is an emerging wastewater biological treatment technology with high efficiency and resistance, but it is still unclear if AGS system could tolerate QACs shock. In this study, a typical QAC (benzalkonium chloride (BACC12)) was selected to investigate its effect on AGS system. Results indicate that BAC could inhibit the pollutants removal performance of AGS system, including COD, NH4+-N and PO43- in the short term and the inhibition ratio had positive correlation with BAC concentration. However, AGS system could gradually adapt to the BAC stress and recover its original performance. BAC shock could destroy AGS structure by decreasing its particle size and finally leading to particle disintegration. Although AGS could secret more EPS to resist the stress, BAC still had significant inhibition on cell activity. Microbial community analysis illustrated that after high BAC concentration shock in short term, Thauera decreased significantly while Flavobacterium became the dominant genus. However, after the performance of AGS system recovered the dominant genus returned to Thauera and relevant denitrifiers Phaeodactylibacter, Nitrosomonas and Pseudofulvimonas also increased. The typical phosphorous removal microorganism Rubrivivax and Leadbetterella also showed the similar trend. The variation of denitrification and phosphorus removal microbial community was consistent with AGS system performance indicating the change of functional microorganism played key role in the AGS response to BAC stress.

Statistical optimization of waste molasses-based exopolysaccharides and self-sustainable bioelectricity production for dual chamber microbial fuel cell by Bacillus piscis

BACKGROUND

The application of exopolysaccharide-producing bacteria (EPS) in dual chamber microbial fuel cells (DCMFC) is critical which can minimize the chemical oxygen demand (COD) of molasses with bioelectricity production. Hence, our study aimed to evaluate the EPS production by the novel strain Bacillus piscis by using molasses waste. Therefore, statistical modeling was used to optimize the EPS production. Its structure was characterized by UV, FTIR, NMR, and monosaccharides compositions. Eventually, to highlight B. piscis' adaptability in energy applications, bioelectricity production by this organism was studied in the BCMFC fed by an optimized molasses medium.

RESULTS

B. piscis OK324045 characterized by 16S rRNA is a potent EPS-forming organism and yielded a 6.42-fold increase upon supplementation of molasses (5%), MgSO4 (0.05%), and inoculum size (4%). The novel exopolysaccharide produced by Bacillus sp. (EPS-BP5M) was confirmed by the structural analysis. The findings indicated that the MFC's maximum close circuit voltage (CCV) was 265 mV. The strain enhanced the performance of DCMFC achieving maximum power density (PD) of 31.98 mW m-2, COD removal rate of 90.91%, and color removal of 27.68%. Furthermore, cyclic voltammetry (CV) revealed that anodic biofilms may directly transfer electrons to anodes without the use of external redox mediators. Additionally, CV measurements made at various sweep scan rates to evaluate the kinetic studies showed that the electron charge transfer was irreversible. The SEM images showed the biofilm growth distributed over the electrode's surface.

CONCLUSIONS

This study offers a novel B. piscis strain for EPS-BP5M production, COD removal, decolorization, and electricity generation of the optimized molasses medium in MFCs. The biosynthesis of EPS-BP5M by a Bacillus piscis strain and its electrochemical activity has never been documented before. The approach adopted will provide significant benefits to sugar industries by generating bioelectricity using molasses as fuel and providing a viable way to improve molasses wastewater treatment.

Performance and mechanism of nitrate removal by the aerobic denitrifying bacterium JI-2 with a strong autoaggregation capacity

Here, a new strain JI-2 of the strongly autoaggregating aerobic denitrifying bacteria was screened. The nitrate removal ability and autoaggregation mechanism of JI-2 were analyzed using the nitrogen balance and genomics technology. The nitrate removal rate was 27.05 mg N/(L·h) at pH 9.0 and C/N 8.0. The strain JI-2 removes nitrate via the aerobic denitrification and dissimilation pathways and removes ammonium via the assimilation pathway. 66.81 % nitrate was converted to cellular components under aerobic conditions. Complex nitrogen metabolism genes were detected in strain JI-2. C-di-GMP mediates the motility behavior of JI-2 by binding the FleQ and PilZ proteins, and regulating the expression of PslA. Furthermore, the mechanism of autoaggregation was verified by extracellular polymeric substance analysis. Meanwhile, the nitrate removal rates of strain JI-2 was 11.13-12.50 mg N/(L·h) in wastewater. Thus, strain JI-2 has good prospects for application in the treatment of nitrate wastewater.

Performance and mechanism of tetracycline removal by the aerobic nitrate-reducing strain Pseudomonas sp. XS-18 with auto-aggregation

The coexistence of multiple pollutants has become a distinctive feature of water pollution. However, there are a few strains that can remove nitrate and tetracycline (TC). Here, the efficiency of strain XS-18 in removing nitrate and TC was analyzed, and the mechanism of tolerance and removal of TC was investigated by infrared spectroscopy, three-dimensional fluorescence spectroscopy, and genome analysis. XS-18 could efficiently remove TC (0.40 mg·L^-1·h^-1) at pH 7.0-11.0 with auto-aggregation. TC was removed via extracellular polymeric substance (EPS) (55.90%) and cell surface (44.10%) adsorption. TC (10 mg/L) could stimulate XS-18 to secrete more polysaccharides and hydrophobic proteins to improve its auto-aggregation ability. The findings also confirmed that TC resistance genes were present. Furthermore, the bacterial flagellum, signal transduction of the chemotactic system and regulatory genes were shown to be related to the auto-aggregation of the strain. XS-18 has potential applications in the treatment of wastewater containing nitrate and TC.

Application of aerobic denitrifier for simultaneous removal of nitrogen, zinc, and bisphenol A from wastewater

High concentrations of heavy metals and other pollutants affect microbial activity in the wastewater treatment system and impede biological denitrification process. In this study, a novel Zn(II)-resistant aerobic denitrifier (Pseudomonas stutzeri KY-37) was isolated with potential in Bisphenol A (BPA) biodegradation and removal. The capability of this denitrifier in removing nitrogen, zinc, and BPA was tested. Using 56 mg/L nitrate as the sole nitrogen source, its removal efficiency achieved 98.5% in 12 h. This novel denitrifier had a strong auto-aggregation (maximum 65.8%), a high hydrophobicity rate (maximum 88.2%), and a massive amount (maximum 41.1 mg/g cell dry weight) of extracellular polymeric substances (EPS) production. Moreover, Zn(II) removal efficiency reached more than 95% with the initial high concentrations of 200 mg/L. The maximum BPA removal efficiency reached 88.8% with initial 10 mg/L. The removal mechanism of BPA was further explored in terms of microbial degradation, EPS adsorption, and intermediate degradation products.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Structural Characteristics of Aerobic Granular Sludge and Factors That Influence Its Stability: A Mini Review

Current extensive research on aerobic granular sludge (AGS) largely focuses on improving its microbial biodiversity, settlement behavior, nitrogen and phosphorus removal efficiency, and shock load resistance. Great challenges that have to be faced are the bottleneck of slow-speed granulation and easy disintegration after granulation, which are key to the extended application of AGS technology. In the present review, the typical morphological structures of AGS are firstly summarized as well as the granulation model hypotheses, and then, we analyze the dominant microflora and their spatial distribution features. The influencing factors on particle structure stability are discussed thereafter on a macro and micro scale. Prospects and future research trends are also discussed based on the current study results for AGS technology.

Efficacy of auto-aggregating aerobic denitrifiers with coaggregation traits for bioaugmentation performance in biofilm-formation and nitrogen-removal

To promote efficiency nitrogen-rich wastewater treatment from a sequencing batch biofilm reactor (SBBR), three aerobic denitrifiers (Pseudomonas mendocinaIHB602, Methylobacterium gregansDC-1 and Pseudomonas stutzeriIHB618) with dual-capacities of strong auto-aggregation and high nitrogen removal efficiency were studied. The aggregation index analysis indicated that coaggregation of the three strains co-existed was better when compared with one or two strains grown alone. Optimal coaggregation strains were used to bioaugmente a test reactor (SBBR_T), which exhibited a shorter time for biofilm-formation than uninoculated control reactor (SBBR_C). With different influent ammonia-N loads (150, 200 and 300 mg·L^-1), the average ammonia-N and nitrate-N removal efficiency were all higher than that in SBBR_C, as well as a lower nitrite-N accumulation. Microbial community structure analysis revealed coaggregation strains may successfully colonize in the bioreactor and be very tolerant of high nitrogen concentrations, and contribute to the high efficiency of inorganic nitrogen-removal and biofilm-formation.

Biofilm producing indigenous bacteria isolated from municipal sludge and their nutrient removal ability in moving bed biofilm reactor from the wastewater

In the present study, improved moving bed biofilm reactor (MBBR) was applied to enhance the nutrient removal ability of the municipal wastewater. A total of 18 indigenous bacterial isolates were screened from the sewage sludge sample and nitrate reductase, nitrite reductase and hydroxylamine oxidase was analyzed. The strains Pseudomonas aeruginosa NU1 and Acinetobacter calcoaceticus K12 produced 0.87 ± 0.05 U/mg and 0.52 ± 0.12 U/mg hydroxylamine oxidase, 1.023 ± 0.062 U/mg and 1.29 ± 0.07 U/mg nitrite reductase, and 0.789 ± 0.031 U/mg and 1.07 ± 0.13 U/mg nitrate reductase. Nitrogen and phosphate removal improved by the addition of nutrient sources and achieved > 80% removal rate. pH and temperature of the medium also affected nutrient removal and improved removal was achieved at optimum level (p < 0.05). MBBR was designed with R1 (aerobic), R2 and R3 (anoxic) reactors. MBBR reactors removed acceptable level phosphorus removal properties up to 7.2 ± 3.8%, 42.4 ± 4.6%, and 84.2 ± 13.1% in the R1, R2, R3 and R4 reactors, respectively. Denitrification rate showed linear relationship at increasing concentrations nitrogen content in the reactor and denitrification rate was 1.43 g NO₂-N /m²/day at 1.5 g NO₂-N /m²/day. Dehydrogenase activity was assayed in all reactors and maximum amount was detected in the aerobic biofilm reactor. Based on the present findings, MBBRs and the selected bacterial strains are useful for the degradation domestic wastewater with minimum working area.

Bioflocculation effect of Glyptotendipes tokunagai on different Microcystis species: Interactions between secreted silk and extracellular polymeric substances

Cyanobacterial blooms are a major problem in many lakes and can negatively impact public health and ecosystem services. The bioflocculation technique has proven to be a cost-effective, environmentally friendly technique with no secondary pollution to harvest multiple microalgae; however, few studies have focused on its effect on and potential for controlling cyanobacterial blooms in eutrophic lakes. In this study, the bioflocculation efficiencies of different Microcystis species under Glyptotendipes tokunagai (Diptera, Chironomidae) stress conditions and the interactions between secreted silk from Chironomid larvae and extracellular polymeric substances (EPS) from Microcystis were compared. The results indicated that G. tokunagai presented better bioflocculation efficiency on M. wesenbergii than on M. aeruginosa. The formation of "Large Algal Aggregate" flocs was promoted by the derived-soluble extracellular polymeric substances (i.e., proteins and polysaccharides, sEPS) from M. wesenbergii and silk from G. tokunagai. Both M. wesenbergii and midge silk had abundant functional groups, which was beneficial to the formation of the large aggregate. G. tokunagai secreted a large amount of silk to bridge with the sEPS of M. wesenbergii, forming a network structure via interaction between filamentous substance (i.e., complex of sEPS and silk) that plays an important role in the aggregation of Microcystis and the removal of the Microcystis biomass in the water column. The findings provide further insights that will benefit the existing efforts of combating Microcystis blooms in the water column via bioflocculation and will provide a new sustainable approach for inhibiting early bloom formation from the perspective of its provenance in the sediment-water interface.

Nitrous oxide emission during denitrifying phosphorus removal process: A review on the mechanisms and influencing factors

Excessive emissions of nitrogen (N) and phosphorus (P) pollutants are leading to increased eutrophication of water bodies. Biological N and P removal processes have become a research priority in the field of sewage treatment with the aim of improving sewage discharge standards in countries worldwide. Denitrifying P removal processes are more efficient for solving problems related to carbon source competition, sludge age conflict, and high aeration energy consumption compared to traditional biological N and P removal processes, but they are easy to produce nitrous oxide (N₂O) in the process of sewage treatment. N₂O is a greenhouse gas with a global warming potential approximately 190-270 times that of CO₂ and 4-21 times that of CH₄, which was produced and released into the environmental in denitrifying P removal systems under conditions of a low C/N ratio, high dissolved oxygen, and low activity of denitrifying phosphorus accumulating organisms (DPAOs). This paper reviews the emission characteristics and influencing factors of N₂O during denitrifying P removal processes and proposes appropriate strategies for controlling the emission of N₂O. This work serves as a basis for the development of new sewage treatment processes and the reduction of greenhouse gas emissions in future wastewater treatment plants.

Efficient nitrate removal by Pseudomonas mendocina GL6 immobilized on biochar

The performance of nitrate removal by Pseudomonas mendocina GL6 cells immobilized on bamboo biochar was investigated. The results showed that immobilized bacterial cells performed better nitrate removal than the free bacterial cells, and the nitrate removal rate increased from 6.51 mg/(L·h) of free cells to 8.34 mg/(L·h) of immobilized cells. The nitrate removal of immobilized bacterial cells fitted well to the zero-order kinetics model. Moreover, bath experiments showed that immobilized bacterial cells displayed more nitrate removal capacity under different conditions than free bacterial cells due to the protection of biochar carrier. The subsequent mechanistic study suggested that biochar promoted the expression level of denitrification functional genes (napA and nirK) and electron transfer genes involved in denitrification (napB and napC), which resulted in the increase of nitrate removal efficiency. Thus, biochar-immobilized P. mendocina GL6 has much potential to remove nitrate from wastewater via aerobic denitrification.

Improvement in nitrogen removal and changes in community structure in a sequencing batch reactor bioaugmented with P. stutzeri strain XL-2

The aim of this work was to study the bioaugmentation of P. stutzeri strain XL-2 in activated sludge to improve nitrogn removal from wastewater with the guide of growth kinetics. When 4250 mg/L COD and 80 mg/L NH₄⁺-N were applied, the TN removal efficiency in a bioaugmented sequencing batch reactor (SBR_XL) achieved 95%, while that in the control reactor (SBR_C) without strain XL-2 was only 84% (P < 0.05). The microbial community analysis demonstrated that strain XL-2 was successfully bioaugmented in SBR_XL, and increasing influent COD concentration promoted its abundance. Influent COD concentration played a dominant role in affecting community structure, while the bioaugmentation of strain XL-2 had much less impact on the community structure. Combined with principal coordinates analysis, redundancy analysis and FAPROTAX, the improvement of TN removal was mainly achieved by the bioaugmentation of strain XL-2, which played a major role in promoting aerobic denitrification.

Insights Into the Role of Extracellular DNA and Extracellular Proteins in Biofilm Formation of Vibrio parahaemolyticus

The extracellular polymeric substances (EPS) construct the three-dimensional (3-D) structure of biofilms, but their respective roles are still not clear. Therefore, this study aimed to illuminate the role of key chemical components [extracellular DNA (eDNA), extracellular proteins, and carbohydrates] of EPS in biofilm formation of Vibrio parahaemolyticus. The correlations between each key chemical component and biofilm formation were first determined, showing that the biofilm formation of V. parahaemolyticus was strongly positively correlated with both eDNA and protein content (P < 0.01), but not with carbohydrates. Subsequently, individual DNase I or protease K treatment markedly reduced the initial adhesion and structural stability of the formed biofilms by hydrolyzing the eDNA or extracellular proteins, but did not induce significant dispersion of mature biofilms. However, the combination of DNase I and protease K treatment induced the obvious dispersion of the mature biofilms through the concurrent destruction of eDNA and extracellular proteins. The analysis at a structural level showed that the collapse of biofilms was mainly attributed to the great damage of the loop configuration of eDNA and the secondary structure of proteins caused by the enzyme treatment. Therefore, this study provides a deep understanding of the role of key chemical components of EPS in biofilm development of V. parahaemolyticus, which may give a new strategy to develop environmentally friendly methods to eradicate the biofilms in food industry.

Bioaugmentation treatment of nitrogen-rich wastewater with a denitrifier with biofilm-formation and nitrogen-removal capacities in a sequencing batch biofilm reactor

A strain with efficient biofilm-formation and aerobic denitrification capabilities was isolated and identified as Pseudomonas mendocina IHB602. In pure culture, strain IHB602 removed almost all NO₃^--N, NO₂^--N, and NH₄⁺-N (initial concentrations 50 mg/L) within 24 h. The strain produced large amounts of extracellular polymeric substances (maximum 430.33 mg/g cell dry weight) rich in protein but containing almost no humic acid. This, and strong autoaggregation (maximum 47.09%) and hydrophobicity (maximum 85.07%), imparted strain IHB602 with biofilm forming traits. A sequencing batch biofilm reactor bioaugmented with strain IHB602 (SBBR1) had more rapid biofilm-formation than the control without strain IHB602 inoculation (SBBR2). During the stabilization period, the effluent removal ratios for NH₄⁺-N (95%), NO₃^--N (91%) and TN (88%) in SBBR1 were significantly higher than those in SBBR2 (NH₄⁺-N: 91%, NO₃^--N: 88%, TN: 82%). Microbial community structure analysis revealed that strain IHB602 successfully proliferated and contributed to nitrogen removal as well as biofilm formation.

Characteristics of Nitrogen Removal and Extracellular Polymeric Substances of a Novel Salt-Tolerant Denitrifying Bacterium, Pseudomonas sp. DN-23

Extracellular polymeric substances (EPS) influence the auto-aggregation performance of cells and play an important role in nitrogen removal during wastewater treatment. In this study, a salt-tolerant aerobic denitrifying bacterium was isolated from tannery wastewater and identified as Pseudomonas sp. DN-23. The strain exhibited significant growth and denitrifying performance, with NaCl contents ranging from 0 to 50 g/L, and high antioxidative enzyme activity, especially that of catalase (CAT), was detected under salt stress. Even greater auto-aggregation ability was observed with elevated NaCl content. Extinction-emission matrix (EEM) and Fourier-transform infrared (FTIR) spectrum analyses showed that the main components of EPS were proteins and polysaccharides. The polysaccharide content was almost unaffected by NaCl stress, while the protein content increased with NaCl stress, and the proteins may play a more important role in auto-aggregation. Analysis of the contents of each protein's secondary structure suggested that β-Sheets increased with increasing NaCl content, which may be related to the increase of auto-aggregation ability in response to NaCl stress. Therefore, NaCl stress increased the auto-aggregation performance by altering the compositions of EPS and the distribution of protein secondary structures. This study provided further insight into the denitrifying performance, and the relationship between aggregation ability and EPS characteristics under NaCl stress.

In-situ remediation of sediment by calcium nitrate combined with composite microorganisms under low-DO regulation

In this work, in-situ remediation of sediment was carried out by combining various methods. The results showed that the treatment effect of Calcium nitrate + composite functional microorganisms + Low-DO (dissolved oxygen) aeration (CN/CFM/LDA) was the best, in which 2.5 g calcium nitrate, 1 g functional bacteria and intermittent aeration (0.1 m³/h, 3 h per day) were utilized for the remediation of 500 g sediments within 40-day experimental period. The DO and oxidation reduction potential (ORP) in overlying water have been improved from 3.23 mg/L to 4.4 mg/L and 25.8 mV to 112.4 mV, respectively. The release fluxes of ammonia nitrogen (NH₄⁺-N), nitrite nitrogen (NO₂^--N) and nitrate nitrogen (NO₃^--N) were respectively reduced by 30.51%, 13.11% and 77.45% compared with the control and the removal rate of the acid volatile sulfide (AVS) in sediments was 94.14% compared with the original sample. The results of high-throughput sequencing show that the dominant bacterial community in CN/CFM/LDA was transformed into Proteobacteria (relative abundance of 74.17%) at the phylum level and Thiobacillus (relative abundance of 38.52%) at the genus level. The results of 16S functional prediction indicated that the remediation method can enhance the numbers of microbial key enzymes (92360) in the nitrification and denitrification process, where Low-DO aeration can mediate the growth of denitrifying bacteria and promote the performance of key enzymes. In conclusion, the experimental results show that the use of calcium nitrate and composite functional microorganisms under low-DO regulation has a promising remediation effect on sediments of black-malodorous water.

Efficacy of zero nitrous oxide emitting aerobic denitrifying bacterium, Methylobacterium gregans DC-1 in nitrate removal with strong auto-aggregation property

A novel aerobic denitrifying strain Methylobacterium gregans DC-1 was isolated and identified. Strain DC-1 removed 98.4% of nitrate-nitrogen (NO₃^--N) and 80.7% of total organic carbon with initial concentrations of 50 and 2400 mg/l, respectively. The N balance showed that most NO₃^--N was converted to N₂ (62.18%) without nitrous oxide (N₂O) emission. Response surface analysis showed that the optimal conditions for total N removal were carbon (C):N ratio of 18.7, temperature of 26.8 °C, pH of 6.5 and shaking speed of 180 rpm. In combination with the N balance and successful amplification of napA, nirK and nosZ genes, the metabolic pathway was as follows: NO₃^-NO₂^- → NO → N₂O → N₂. Strain DC-1 had strong auto-aggregation rate (maximum 38.7%), produced large amounts of extracellular polymeric substances (EPS; maximum of 781.4 mg/g cell dry weight) and had corresponding strong hydrophobicity (maximum 83.2%). Pearson correlation analysis showed that EPS content and hydrophobicity were significantly positively correlated with auto-aggregation.

The Nitrogen-Removal Efficiency of a Novel High-Efficiency Salt-Tolerant Aerobic Denitrifier, Halomonas Alkaliphile HRL-9, Isolated from a Seawater Biofilter

Aerobic denitrification microbes have great potential to solve the problem of NO₃^--N accumulation in industrialized recirculating aquaculture systems (RASs). A novel salt-tolerant aerobic denitrifier was isolated from a marine recirculating aquaculture system (RAS) and identified as Halomonas alkaliphile HRL-9. Its aerobic denitrification performance in different dissolved oxygen concentrations, temperatures, and C/N ratios was studied. Investigations into nitrogen balance and nitrate reductase genes (napA and narG) were also carried out. The results showed that the optimal conditions for nitrate removal were temperature of 30 °C, a shaking speed of 150 rpm, and a C/N ratio of 10. For nitrate nitrogen (NO₃^--N) (initial concentration 101.8 mg·L^-1), the sole nitrogen source of the growth of HRL-9, the maximum NO₃^--N removal efficiency reached 98.0% after 24 h and the maximum total nitrogen removal efficiency was 77.3% after 48 h. Nitrogen balance analysis showed that 21.7% of NO₃^--N was converted into intracellular nitrogen, 3.3% of NO₃^--N was converted into other nitrification products (i.e., nitrous nitrogen, ammonium nitrogen, and organic nitrogen), and 74.5% of NO₃^--N might be converted to gaseous products. The identification of functional genes confirmed the existence of the napA gene in strain HRL-9, but no narG gene was found. These results confirm that the aerobic denitrification strain, Halomonas alkaliphile HRL-9, which has excellent aerobic denitrification abilities, can also help us understand the microbiological mechanism and transformation pathway of aerobic denitrification in RASs.

Role of extracellular polymeric substances in biofilm formation by Pseudomonas stutzeri strain XL-2

Pseudomonas stutzeri strain XL-2 exhibited significant performance on biofilm formation. Extracellular polymeric substances (EPS) secreted by strain XL-2 were characterized by colorimetry and Fourier transform infrared (FT-IR) spectroscopy. The biofilm growth showed a strong positive correlation (r_P=0.96, P<0.01) to extracellular protein content, but no correlation to exopolysaccharide content. Hydrolyzing the biofilm with proteinase K caused a significant decrease in biofilm growth (t=3.7, P<0.05), whereas the changes in biofilm growth were not significant when the biofilm was hydrolyzed by α-amylase and β-amylase, implying that proteins rather than polysaccharides played the dominant role in biofilm formation. More specifically, confocal laser scanning microscopy (CLSM) revealed that the extracellular proteins were tightly bound to the cells, resulting in the cells with EPS presenting more biofilm promotion protein secondary structures, such as three-turn helices, β-sheet, and α-helices, than cells without EPS. Both bio-assays and quantitative analysis demonstrated that strain XL-2 produced signal molecules of N-acylhomoserine lactones (AHLs) during biofilm formation process. The concentrations of C₆-HLS and C₆-oxo-HLS were both significantly positively correlated with protein contents (P<0.05). Dosing exogenous C₆-HLS and C₆-oxo-HLS also resulted in the increase in protein content. Therefore, it was speculated that C₆-HLS and C₆-oxo-HLS released by strain XL-2 could up-regulate the secretion of proteins in EPS, and thus promote the formation of biofilm.

N2O production from hydroxylamine oxidation and corresponding hydroxylamine oxidoreductase involved in a heterotrophic nitrifier A. faecalis strain NR

N₂O production from NH₂OH oxidation involved in a heterotrophic nitrifier Alcaligenes faecalis strain NR was studied. ¹⁵N-labeling experiments showed that biological NH₂OH consumption by strain NR played a dominant role in N₂O production, although chemical reaction between NH₂OH and O₂ indeed existed. Hydroxylamine oxidoreductase (HAO) from strain NR was partially purified by (NH₄)₂SO₄ fractionation and DEAE Cartridge chromatography. The maximum activity of HAO was 9.60 mU with a specific activity of 92.04 mU/(mg protein) when K₃Fe(CN)₆ was used as an electron acceptor. The addition of Ca²⁺ promoted the HAO activity, while the presence of Mn²⁺ inhibited the enzyme activity. The optimal temperature and pH for HAO activity were 30 °C and 8. Analysis of enzyme-catalyzed products demonstrated that NH₂OH oxidation catalyzed by HAO from strain NR played significant role in the production of N₂O.

Effect of NaCl on nitrification performance and extracellular polymeric substance characteristic of Klebsiella sp. TN-10

Klebsiella sp. TN-10, isolated from tannery wastewater, exhibited excellent nitrification ability cultivated in media with NaCl contents ranging from 0 to 35 g/L. Analysis of antioxidative enzyme activities of TN-10 stressed by NaCl showed that the stain produced more superoxide dismutase (SOD) and catalase (CAT) to fight against salt stress conditions. Moreover, the auto-aggregation index of TN-10 decreased with the increment of NaCl contents, which is consistent with results of zeta potentials. Extinction-emission matrix (EEM) and Fourier-transform infrared (FT-IR) spectrum analyses showed that the compositions of extracellular polymeric substances (EPS) by TN-10 after NaCl shock were similar. Furthermore, proteins and polysaccharides were the main components of EPS, and the contents were greatly influenced by salinity. Then, circular dichroism (CD) spectrum was used to calculate the contents of each protein secondary structure. These results provided further insights into the knowledge of nitrification characteristics, auto-aggregation performance, and EPS compositions of TN-10 during NaCl shock.

Characterization of Aerobic Denitrifying Bacterium Pseudomonas mendocina Strain GL6 and Its Potential Application in Wastewater Treatment Plant Effluent

To remove nitrate in wastewater treatment plant effluent, an aerobic denitrifier was newly isolated from the surface flow constructed wetland and identified as Pseudomonas mendocina strain GL6. It exhibited efficient aerobic denitrification ability, with the nitrate removal rate of 6.61 mg (N)·L⁻¹·h⁻¹. Sequence amplification indicated that the denitrification genes napA, nirK, norB, and nosZ were present in strain GL6. Nitrogen balance analysis revealed that approximately 74.5% of the initial nitrogen was removed as gas products. In addition, the response surface methodology experiments showed that the maximum removal of total nitrogen occurred at pH 7.76, C/N ratio of 11.2, temperature of 27.8 °C, and with shaking at 133 rpm. Furthermore, under the optimized cultivation condition, strain GL6 was added into wastewater treatment plant effluent and the removal rates of nitrate nitrogen and total nitrogen reached 95.6% and 73.6%, respectively. Thus, P. mendocina strain GL6 has high denitrification potential for deep improvement of effluent quality.

Isolation and Nitrogen Removal Characteristics of an Aerobic Heterotrophic Nitrifying-Denitrifying Bacterium, Klebsiella sp. TN-10

Nitrogen removal by microorganisms has attracted increasing attention in wastewater treatment. In the present study, a heterotrophic nitrification bacterium was isolated from tannery wastewater and identified as Klebsiella sp. TN-10 based on phenotypic and phylogenetic characteristics. The optimal conditions for cell growth and nitrogen removal were investigated, and the results showed that the greatest ammonium removal rate and maximum biomass were achieved by using sodium pyruvate (7 g/L) as carbon source, C/N 12, pH 7, and temperature 30 °C. Under optimal conditions, the removal rate of ammonia nitrogen reached 96%. Besides, the growth characteristic and the ability of utilizing nitrate and nitrite were investigated. The results demonstrated that strain TN-10 exhibited excellent characteristics to remove both nitrate and nitrite, with the removal rate of 95.44% and 99.87%, respectively. In addition, the nitrite reductase (NiR) and nitrate reductase (NR) involved in denitrification were both active, with the activities of 0.0815 and 0.0283 U/mg proteins, respectively. Furthermore, the aggregation ability, auto-aggregation kinetics, and the relationship between zeta potentials and flocculating efficiency were determined. These results indicated that the strain Klebsiella sp. TN-10, with efficient heterotrophic nitrification-aerobic denitrification ability, has potential application in wastewater treatment.

Application of a novel strain Corynebacterium pollutisoli SPH6 to improve nitrogen removal in an anaerobic/aerobic-moving bed biofilm reactor (A/O-MBBR)

A novel bacterium Corynebacterium pollutisoli SPH6 was added in A/O-MBBR system to explore its potential in nitrogen removal. Sodium acetate was found to be its favorable carbon sources compared to glucose, sucrose and methanol. Response surface methodology analysis revealed that SPH6 has the maximum specific degradation rate of total nitrogen (4.9302 mg N/(mg·cells·h^-1)) with the temperature of 30.5 °C, pH of 7.97, inoculation ratio of 7.73% and the ratio of chemical oxygen demand and total nitrogen (COD/TN) of 7.77. The inoculation of SPH6 in A/O-MBBR demonstrated that the strain SPH6 could substantially improve the TN removal efficiency with 20% averagely. The results of high-throughput sequencing showed that the inoculation of SPH6 would essentially improve the microbial community involving nitrogen removal genus such as Hydrogenophaga, Desulfuromonas, and Desulfomicrobium. This study is of importance in providing microbial sources for bioaugmentation in nitrogen removal of wastewater treatment.