Biosynthetic strategies to produce xylitol: an economical venture

Exploring the complexity of xylitol production in the fungal cell factory Aspergillus niger

Production of xylitol from agricultural by-products offers a promising approach for the circular bioeconomy. This study investigates the roles of transcription factors XlnR and CreA in xylitol production from wheat bran in Aspergillus niger by generating strains with a constitutively active XlnR (XlnRc, V756F mutation) and/or deletion of creA, in a previously generated xylitol-producing strain. The XlnRc mutation increased the initial rate of xylitol production but lowered the overall accumulation. Deletion of creA in this strain significantly improved both the onset and rate of xylitol production, indicating an inhibitory role of CreA in the PCP. These results demonstrate the complexity of metabolic engineering to generate fungal cell factories for valuable biochemicals, such as xylitol, as not only metabolic but also multiple gene regulation aspects need to be considered.

Research progress in the biosynthesis of xylitol: feedstock evolution from xylose to glucose

Xylitol, as an important food additive and fine chemical, has a wide range of applications, including food, medicine, chemical, and feed. This review paper focuses on the research progress of xylitol biosynthesis, from overcoming the limitations of traditional chemical hydrogenation and xylose bioconversion, to the full biosynthesis of xylitol production using green and non-polluting glucose as substrate. In the review, the molecular strategies of wild strains to increase xylitol yield, as well as the optimization strategies and metabolic reconfiguration during xylitol biosynthesis are discussed. Subsequently, on the basis of existing studies, the paper further discusses the current status of research and future perspectives of xylitol production using glucose as a single substrate. The evolution of raw materials from xylose-based five-carbon sugars to glucose is not only cost-saving, but also safe and environmentally friendly, which brings new opportunities for the green industrial chain of xylitol.

Biosynthesis of D-1,2,4-butanetriol promoted by a glucose-xylose dual metabolic channel system in engineered Escherichia coli

D-1,2,4-butanetriol (BT) is a widely used fine chemical that can be manufactured by engineered Escherichia coli expressing heterologous pathways and using xylose as a substrate. The current study developed a glucose-xylose dual metabolic channel system in an engineered E. coli and Combinatorially optimized it using multiple strategies to promote BT production. The carbon catabolite repression effects were alleviated by deleting the gene ptsG that encodes the major glucose transporter IICBGlc and mutating the gene crp that encodes the catabolite repressor protein, thereby allowing C-fluxes of both glucose and xylose into their respective metabolic channels separately and simultaneously, which increased BT production by 33% compared with that of the original MJ133K-1 strain. Then, the branch metabolic pathways of intermediates in the BT channel were investigated, the transaminase HisC, the ketoreductases DlD, OLD, and IlvC, and the aldolase MhpE and YfaU were identified as the enzymes for the branched metabolism of 2-keto-3-deoxy-xylonate, deletion of the gene hisC increased BT titer by 21.7%. Furthermore, the relationship between BT synthesis and the intracellular NADPH level was examined, and deletion of the gene pntAB that encodes a transhydrogenase resulted in an 18.1% increase in BT production. The combination of the above approaches to optimize the metabolic network increased BT production by 47.5%, resulting in 2.67 g/L BT in 24 deep-well plates. This study provides insights into the BT biosynthesis pathway and demonstrates effective strategies to increase BT production, which will promote the industrialization of the biosynthesis of BT.

First- and second-generation integrated process for bioethanol production: Fermentation of molasses diluted with hemicellulose hydrolysate by recombinant Saccharomyces cerevisiae

The integration of first- (1G) and second-generation (2G) ethanol production by adding sugarcane juice or molasses to lignocellulosic hydrolysates offers the possibility to overcome the problem of inhibitors (acetic acid, furfural, hydroxymethylfurfural and phenolic compounds), and add nutrients (such as salts, sugars and nitrogen sources) to the fermentation medium, allowing the production of higher ethanol titers. In this work, an 1G2G production process was developed with hemicellulosic hydrolysate (HH) from a diluted sulfuric acid pretreatment of sugarcane bagasse and sugarcane molasses. The industrial Saccharomyces cerevisiae CAT-1 was genetically modified for xylose consumption and used for co-fermentation of sucrose, fructose, glucose, and xylose. The fed-batch fermentation with high cell density that mimics an industrial fermentation was performed at bench scale fermenter, achieved high volumetric ethanol productivity of 1.59 g L-1 h-1, 0.39 g g-1 of ethanol yield, and 44.5 g L-1 ethanol titer, and shown that the yeast was able to consume all the sugars present in must simultaneously. With the results, it was possible to establish a mass balance for the global process: from pretreatment to the co-fermentation of molasses and HH, and it was possible to establish an effective integrated process (1G2G) with sugarcane molasses and HH co-fermentation employing a recombinant yeast.

Xylitol biosynthesis enhancement by Candida tropicalis via medium, process parameter optimization, and co-substrate supplementation

The present study examines the impact of nitrogen sources (yeast extract, ammonium sulfate peptone, ammonium nitrate, urea, and sodium nitrate), salt solution (0.5 g/L MgSO4, 0.5 g/L KH2PO4, 0.3 g/L CaCl2), trace elements solution (0.1 g/L CuSO4, 0.1 g/L FeSO4, 0.02 g/L MnCl2, 0.02 g/L ZnSO4), operational parameters (temperature, aeration, agitation, initial pH and xylose concentration) and co- substrate supplementation (glucose, fructose, maltose, sucrose, and glycerol) on xylitol biosynthesis by Candida tropicalis ATCC 13803 using synthetic xylose. The significant medium components were identified using the Plackett Burman design followed by central composite designs to obtain the optimal concentration for the critical medium components in shaker flasks. Subsequently, the effect of operational parameters was examined using the One Factor At a Time method, followed by the impact of five co-substrates on xylitol biosynthesis in a 1 L bioreactor. The optimal media components and process parameters are as follows: peptone: 12.68 g/L, yeast extract: 6.62 g/L, salt solution (0.5 g/L MgSO4, 0.5 g/L KH2PO4, and 0.3 g/L CaCl2): 1.23 X (0.62 g/L, 0.62 g/L, and 0.37 g/L respectively), temperature: 30 °C, pH: 6, agitation: 400 rpm, aeration: 1 vvm, and xylose: 50 g/L. Optimization studies resulted in xylitol yield and productivity of 0.71 ± 0.004 g/g and 1.48 ± 0.018 g/L/h, respectively. Glycerol supplementation (2 g/L) further improved xylitol yield (0.83 ± 0.009 g/g) and productivity (1.87 ± 0.020 g/L/h) by 1.66 and 3.12 folds, respectively, higher than the unoptimized conditions thus exhibiting the potential of C. tropicalis ATCC 13803 being used for commercial xylitol production.

Expanding sugar alcohol industry: Microbial production of sugar alcohols and associated chemocatalytic derivatives

Sugar alcohols are polyols that are widely employed in the production of chemicals, pharmaceuticals, and food products. Chemical synthesis of polyols, however, is complex and necessitates the use of hazardous compounds. Therefore, the use of microbes to produce polyols has been proposed as an alternative to traditional synthesis strategies. Many biotechnological approaches have been described to enhancing sugar alcohols production and microbe-mediated sugar alcohol production has the potential to benefit from the availability of inexpensive substrate inputs. Among of them, microbe-mediated erythritol production has been implemented in an industrial scale, but microbial growth and substrate conversion rates are often limited by harsh environmental conditions. In this review, we focused on xylitol, mannitol, sorbitol, and erythritol, the four representative sugar alcohols. The main metabolic engineering strategies, such as regulation of key genes and cofactor balancing, for improving the production of these sugar alcohols were reviewed. The feasible strategies to enhance the stress tolerance of chassis cells, especially thermotolerance, were also summarized. Different low-cost substrates like glycerol, molasses, cellulose hydrolysate, and CO₂ employed for producing these sugar alcohols were presented. Given the value of polyols as precursor platform chemicals that can be leveraged to produce a diverse array of chemical products, we not only discuss the challenges encountered in the above parts, but also envisioned the development of their derivatives for broadening the application of sugar alcohols.

Crystallization Behavior and Crystallographic Properties of dl-Arabinose and dl-Xylose Diastereomer Sugars

Natural sugar molecules such as xylose and arabinose exhibit sweetness profiles similar to sucrose, which makes them a valuable alternative in low-calorie foods as well as excipients or cocrystallization agents in pharmaceutical formulations. Xylose and arabinose are also chiral diastereomers that can exhibit specific crystallization behavior. In this work, the solid-state landscapes of the chiral pairs of both xylose and arabinose have been investigated to determine whether racemic compounds or conglomerates are formed. Furthermore, single crystals of xylose and arabinose have been grown and characterized by X-ray diffraction and optical microscopy to study their crystallographic properties and relate them to the crystallization behavior. Differential scanning calorimetry (DSC) measurements were used to determine the phase diagrams of the two analyzed chiral systems. The solubilities of the different solid forms of xylose and arabinose were measured in different solvent mixtures by a thermogravimetric method. An analysis was conducted to assess the main thermodynamic parameters and the activity coefficients of the compounds in solution. Finally, slurry experiments in a 50:50 w/w ethanol/water solvent have also been performed to determine the relative stability of each solid form and the kinetics of transformation in this solvent mixture. It was found that dl-arabinose crystallizes as a stable racemic compound, which transforms quickly from its constituent enantiomers when in solution; whereas d- and l-xylose molecules crystallize separately as a conglomerate.

High level xylitol production by Pichia fermentans using non-detoxified xylose-rich sugarcane bagasse and olive pits hydrolysates

Hemicellulosic sugars, the overlooked fraction of lignocellulosic residues can serve as potential and cost-effective raw material that can be exploited for xylitol production. Xylitol is a top platform chemical with applications in food and pharmaceutical industries. Sugarcane bagasse (SCB) and olive pits (OP) are the major waste streams from sugar and olive oil industries, respectively. The current study evaluated the potential of Pichia fermentans for manufacturing of xylitol from SCB and OP hydrolysates through co-fermentation strategy. The highest xylitol accumulation was noticed with a glucose and xylose ratio of 1:10 followed by feeding with xylose alone. The fed-batch cultivation using pure xylose, SCB, and OP hydrolysates, resulted in xylitol accumulation of 102.5, 86.6 and 71.9 g/L with conversion yield of 0.78, 0.75 and 0.74 g/g, respectively. The non-pathogenic behaviour and ability to accumulate high xylitol levels from agro-industrial residues demonstrates the potential of P. fermentans as microbial cell factory.

Xylitol Production by Candida Species from Hydrolysates of Agricultural Residues and Grasses

Xylitol is an industrially important chemical due to its commercial applications. The use of xylitol as a sweetener as well as its utilization in biomedical applications has made it a high value specialty chemical. Although several species of yeast synthesize xylitol, this review focusses on the species of the genus Candida. The importance of the enzyme xylitol reductase present in Candida species as it relates to their ability to synthesize xylitol was examined. Another focus of this work was to review prior studies examining the ability of the Candida species to synthesize xylitol effectively from hydrolysates of agricultural residues and grasses. An advantage of utilizing such a hydrolysate as a substrate for yeast xylitol production would be decreasing the overall cost of synthesizing xylitol. The intent of this review was to learn if such hydrolysates could substitute for xylose as a substrate for the yeast when producing xylitol. In addition, a comparison of xylitol production by Candida species should indicate which hydrolysate of agricultural residues and grasses would be the best substrate for xylitol production. From studies analyzing previous hydrolysates of agricultural residues and grasses, it was concluded that a hydrolysate of sugarcane bagasse supported the highest level of xylitol by Candida species, although corncob hydrolysates also supported significant yeast xylitol production. It was also concluded that fewer studies examined yeast xylitol production on hydrolysates of grasses and that further research on grasses may provide hydrolysates with a higher xylose content, which could support greater yeast xylitol production.

Metabolic engineering of Yarrowia lipolytica for terpenoids production: advances and perspectives

Terpenoids are a large family of natural products with diversified structures and functions that are widely used in the food, pharmaceutical, cosmetic, and agricultural fields. However, the traditional methods of terpenoids production such as plant extraction and chemical synthesis are inefficient due to the complex processes, high energy consumption, and low yields. With progress in metabolic engineering and synthetic biology, microbial cell factories provide an interesting alternative for the sustainable production of terpenoids. The non-conventional yeast, Yarrowia lipolytica, is a promising host for terpenoid biosynthesis due to its inherent mevalonate pathway, high fluxes of acetyl-CoA and NADPH, and the naturally hydrophobic microenvironment. In this review, we highlight progress in the engineering of Y. lipolytica as terpenoid biomanufacturing factories, describing the different terpenoid biosynthetic pathways and summarizing various metabolic engineering strategies, including progress in genetic manipulation, dynamic regulation, organelle engineering, and terpene synthase variants.

Production of xylitol by Saccharomyces cerevisiae using waste xylose mother liquor and corncob residues

Exorbitant outputs of waste xylose mother liquor (WXML) and corncob residue from commercial‐scale production of xylitol create environmental problems. To reduce the wastes, a Saccharomyces cerevisiae strain tolerant to WXML was conferred with abilities to express the genes of xylose reductase, a xylose‐specific transporter and enzymes of the pentose phosphate pathway. This strain showed a high capacity to produce xylitol from xylose in WXML with glucose as a co‐substrate. Additionally, a simultaneous saccharification and fermentation (SSF) process was designed to use corncob residues and cellulase instead of directly adding glucose as a co‐substrate. Xylitol titer and the productivity were, respectively, 91.0 g l^‐1 and 1.26 ± 0.01 g l^‐1 h^‐1 using 20% WXML, 55 g DCW l^‐1 delignified corncob residues and 11.8 FPU g_cellulose^‐1 cellulase at 35° during fermentation. This work demonstrates the promising strategy of SSF to exploit waste products to xylitol fermentation process.

Stepwise metabolic engineering of Candida tropicalis for efficient xylitol production from xylose mother liquor

Background

Commercial xylose purification produces xylose mother liquor (XML) as a major byproduct, which has become an inexpensive and abundant carbon source. A portion of this XML has been used to produce low-value-added products such as caramel but the remainder often ends up as an organic pollutant. This has become an issue of industrial concern. In this study, a uracil-deficient Candida tropicalis strain was engineered to efficiently convert XML to the commercially useful product xylitol.

Results

The xylitol dehydrogenase gene was deleted to block the conversion of xylitol to xylulose. Then, an NADPH regeneration system was added through heterologous expression of the Yarrowia lipolytica genes encoding 6-phosphate-gluconic acid dehydrogenase and 6-phosphate-glucose dehydrogenase. After process optimization, the engineered strain, C. tropicalis XZX-B4ZG, produced 97.10 g L^− 1 xylitol in 120 h from 300 g L^− 1 XML in a 5-L fermenter. The xylitol production rate was 0.82 g L^− 1 h^− 1 and the conversion rate was 92.40 %.

Conclusions

In conclusion, this study performed a combination of metabolic engineering and process optimizing in C. tropicalis to enhance xylitol production from XML. The use of C. tropicalis XZX-B4ZG, therefore, provided a convenient method to transform the industrial by-product XML into the useful material xylitol.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01596-1.

Recent advances in the valorization of plant biomass

Plant biomass is a highly abundant renewable resource that can be converted into several types of high-value-added products, including chemicals, biofuels and advanced materials. In the last few decades, an increasing number of biomass species and processing techniques have been developed to enhance the application of plant biomass followed by the industrial application of some of the products, during which varied technologies have been successfully developed. In this review, we summarize the different sources of plant biomass, the evolving technologies for treating it, and the various products derived from plant biomass. Moreover, the challenges inherent in the valorization of plant biomass used in high-value-added products are also discussed. Overall, with the increased use of plant biomass, the development of treatment technologies, and the solution of the challenges raised during plant biomass valorization, the value-added products derived from plant biomass will become greater in number and more valuable.

Dynamic control over feedback regulatory mechanisms improves NADPH flux and xylitol biosynthesis in engineered E. coli

We report improved NADPH flux and xylitol biosynthesis in engineered E. coli. Xylitol is produced from xylose via an NADPH dependent reductase. We utilize 2-stage dynamic metabolic control to compare two approaches to optimize xylitol biosynthesis, a stoichiometric approach, wherein competitive fluxes are decreased, and a regulatory approach wherein the levels of key regulatory metabolites are reduced. The stoichiometric and regulatory approaches lead to a 20-fold and 90-fold improvement in xylitol production, respectively. Strains with reduced levels of enoyl-ACP reductase and glucose-6-phosphate dehydrogenase, led to altered metabolite pools resulting in the activation of the membrane bound transhydrogenase and an NADPH generation pathway, consisting of pyruvate ferredoxin oxidoreductase coupled with NADPH dependent ferredoxin reductase, leading to increased NADPH fluxes, despite a reduction in NADPH pools. These strains produced titers of 200 g/L of xylitol from xylose at 86% of theoretical yield in instrumented bioreactors. We expect dynamic control over the regulation of the membrane bound transhydrogenase as well as NADPH production through pyruvate ferredoxin oxidoreductase to broadly enable improved NADPH dependent bioconversions or production via NADPH dependent metabolic pathways.

Improving xylitol yield by deletion of endogenous xylitol-assimilating genes: a study of industrial Saccharomyces cerevisiae in fermentation of glucose and xylose

Engineered Saccharomyces cerevisiae can reduce xylose to xylitol. However, in S.cerevisiae, there are several endogenous enzymes including xylitol dehydrogenase encoded by XYL2, sorbitol dehydrogenases encoded by SOR1/SOR2 and xylulokinase encoded by XKS1 may lead to the assimilation of xylitol. In this study, to increase xylitol accumulation, these genes were separately deleted through CRISPR/Cas9 system. Their effects on xylitol yield of an industrial S. cerevisiae CK17 overexpressing Candida tropicalis XYL1 (encoding xylose reductase) were investigated. Deletion of SOR1/SOR2 or XKS1 increased the xylitol yield in both batch and fed-batch fermentation with different concentrations of glucose and xylose. The analysis of the transcription level of key genes in the mutants during fed-batch fermentation suggests that SOR1/SOR2 are more crucially responsible for xylitol oxidation than XYL2 under the genetic background of S.cerevisiae CK17. The deletion of XKS1 gene could also weaken SOR1/SOR2 expression, thereby increasing the xylitol accumulation. The XKS1-deleted strain CK17ΔXKS1 produced 46.17 g/L of xylitol and reached a xylitol yield of 0.92 g/g during simultaneous saccharification and fermentation (SSF) of pretreated corn stover slurry. Therefore, the deletion of XKS1 gene provides a promising strategy to meet the industrial demands for xylitol production from lignocellulosic biomass.

Pentose metabolism and conversion to biofuels and high-value chemicals in yeasts

Pentose sugars are widespread in nature and two of them, D-xylose and L-arabinose belong to the most abundant sugars being the second and third by abundance sugars in dry plant biomass (lignocellulose) and in general on planet. Therefore, it is not surprising that metabolism and bioconversion of these pentoses attract much attention. Several different pathways of D-xylose and L-arabinose catabolism in bacteria and yeasts are known. There are even more common and really ubiquitous though not so abundant pentoses, D-ribose and 2-deoxy-D-ribose, the constituents of all living cells. Thus, ribose metabolism is example of endogenous metabolism whereas metabolism of other pentoses, including xylose and L-arabinose, represents examples of the metabolism of foreign exogenous compounds which normally are not constituents of yeast cells. As a rule, pentose degradation by the wild-type strains of microorganisms does not lead to accumulation of high amounts of valuable substances; however, productive strains have been obtained by random selection and metabolic engineering. There are numerous reviews on xylose and (less) L-arabinose metabolism and conversion to high value substances; however, they mostly are devoted to bacteria or the yeast Saccharomyces cerevisiae. This review is devoted to reviewing pentose metabolism and bioconversion mostly in non-conventional yeasts, which naturally metabolize xylose. Pentose metabolism in the recombinant strains of S. cerevisiae is also considered for comparison. The available data on ribose, xylose, L-arabinose transport, metabolism, regulation of these processes, interaction with glucose catabolism and construction of the productive strains of high-value chemicals or pentose (ribose) itself are described. In addition, genome studies of the natural xylose metabolizing yeasts and available tools for their molecular research are reviewed. Metabolism of other pentoses (2-deoxyribose, D-arabinose, lyxose) is briefly reviewed.

Combination of the CRP mutation and ptsG deletion in Escherichia coli to efficiently synthesize xylitol from corncob hydrolysates

The biotechnology-based production of xylitol has received widespread attention because it can use cheap and renewable lignocellulose as a raw material, thereby decreasing costs and pollution. The simultaneous use of various sugars in lignocellulose hydrolysates is a primary prerequisite for efficient xylitol production. In this study, a ΔptsG and crp* combinatorial strategy was used to generate Escherichia coli W3110 strain IS5-dI, which completely eliminated glucose repression and simultaneously used glucose and xylose. This strain produced 164 g/L xylitol from detoxified corncob hydrolysates during a fed-batch fermentation in a 15-L bioreactor, which was 14.7% higher than the xylitol produced by the starting strain, IS5-d (143 g/L), and the xylitol productivity was 3.04 g/L/h. These results represent the highest xylitol concentration and productivity reported to date for bacteria and hemicellulosic sugars. Additionally, strain IS5-dG, which differs from IS5-dI at CRP amino acid residue 127 (I127G), was tolerant to the toxins in corncob hydrolysates. In a fed-batch fermentation experiment involving a 15-L bioreactor, IS5-dG produced 137 g/L xylitol from non-detoxified corncob hydrolysates, with a productivity of 1.76 g/L/h. On the basis of these results, we believe that IS5-dI and IS5-dG may be useful host strains for the industrial-scale production of xylitol from detoxified or non-detoxified corncob hydrolysates.

Multi-Step Exploitation of Raw Arundo donax L. for the Selective Synthesis of Second-Generation Sugars by Chemical and Biological Route

Lignocellulosic biomass represents one of the most important feedstocks for future biorefineries, being a precursor of valuable bio-products, obtainable through both chemical and biological conversion routes. Lignocellulosic biomass has a complex matrix, which requires the careful development of multi-step approaches for its complete exploitation to value-added compounds. Based on this perspective, the present work focuses on the valorization of hemicellulose and cellulose fractionsof giant reed (Arundo donax L.) to give second-generation sugars, minimizing the formation of reaction by-products. The conversion of hemicellulose to xylose was undertaken in the presence of the heterogeneous acid catalyst Amberlyst-70 under microwave irradiation. The effect of the main reaction parameters, such as temperature, reaction time, catalyst, and biomass loadings on sugars yield was studied, developing a high gravity approach. Under the optimised reaction conditions (17 wt% Arundo donax L. loading, 160 °C, Amberlyst-70/Arundo donax L. weight ratio 0.2 wt/wt), the xylose yield was 96.3 mol%. In the second step, the cellulose-rich solid residue was exploited through the chemical or enzymatic route, obtaining glucose yields of 32.5 and 56.2 mol%, respectively. This work proves the efficiency of this innovative combination of chemical and biological catalytic approaches, for the selective conversion of hemicellulose and cellulose fractions of Arundo donax L. to versatile platform products.