Wood-water relationships and their role for wood susceptibility to fungal decay

Once upon a Time, There Was a Piece of Wood: Present Knowledge and Future Perspectives in Fungal Deterioration of Wooden Cultural Heritage in Terrestrial Ecosystems and Diagnostic Tools

Wooden Cultural Heritage (WCH) represents a significant portion of the world's historical and artistic heritage, consisting of immovable and movable artefacts. Despite the expertise developed since ancient times to enhance its durability, wooden artefacts are inevitably prone to degradation. Fungi play a pivotal role in the deterioration of WCH in terrestrial ecosystems, accelerating its decay and leading to alterations in color and strength. Reviewing the literature of the last 25 years, we aimed to provide a comprehensive overview of fungal diversity affecting WCH, the biochemical processes involved in wood decay, and the diagnostic tools available for fungal identification and damage evaluation. Climatic conditions influence the occurrence of fungal species in threatened WCH, characterized by a prevalence of wood-rot fungi (e.g., Serpula lacrymans, Coniophora puteana) in architectural heritage in temperate and continental climates and Ascomycota in indoor and harsh environments. More efforts are needed to address the knowledge fragmentation concerning biodiversity, the biology of the fungi involved, and succession in the degradative process, which is frequently centered solely on the main actors. Multidisciplinary collaboration among engineers, restorers, and life sciences scientists is vital for tackling the challenges posed by climate change with increased awareness. Traditional microbiology and culture collections are fundamental in laying solid foundations for a more comprehensive interpretation of big data.

Fungal biodeterioration and preservation of cultural heritage, artwork, and historical artifacts: extremophily and adaptation

SUMMARYFungi are ubiquitous and important biosphere inhabitants, and their abilities to decompose, degrade, and otherwise transform a massive range of organic and inorganic substances, including plant organic matter, rocks, and minerals, underpin their major significance as biodeteriogens in the built environment and of cultural heritage. Fungi are often the most obvious agents of cultural heritage biodeterioration with effects ranging from discoloration, staining, and biofouling to destruction of building components, historical artifacts, and artwork. Sporulation, morphological adaptations, and the explorative penetrative lifestyle of filamentous fungi enable efficient dispersal and colonization of solid substrates, while many species are able to withstand environmental stress factors such as desiccation, ultra-violet radiation, salinity, and potentially toxic organic and inorganic substances. Many can grow under nutrient-limited conditions, and many produce resistant cell forms that can survive through long periods of adverse conditions. The fungal lifestyle and chemoorganotrophic metabolism therefore enable adaptation and success in the frequently encountered extremophilic conditions that are associated with indoor and outdoor cultural heritage. Apart from free-living fungi, lichens are a fungal growth form and ubiquitous pioneer colonizers and biodeteriogens of outdoor materials, especially stone- and mineral-based building components. This article surveys the roles and significance of fungi in the biodeterioration of cultural heritage, with reference to the mechanisms involved and in relation to the range of substances encountered, as well as the methods by which fungal biodeterioration can be assessed and combated, and how certain fungal processes may be utilized in bioprotection.

The Effects of Interior Materials on the Restorativeness of Home Environments

The effects of a restorative environment on attention restoration and stress reduction have received much attention in societies, especially during the COVID-19 pandemic. Interior materials are a crucial environmental element influencing people's perceived restorativeness at home. Nevertheless, few studies have examined the links between interior materials and the restorativeness of home environments. To address this gap, this study aimed to investigate the restorative potential of interior materials among a sample of adults in China. Cross-sectional data from 85 participants whose professional majors were related to interior design were selected. The measures of the restorative potential of each interior material were obtained by a questionnaire adapted from the semantic differential method. The Wilcoxon signed-rank test was used to compare the restorative potential of interior materials. We found that glass material had the best restorative potential in home environments. Doubts were raised regarding wood material's restorativeness, and more consideration should be granted for designing a restorative home with wood material. In contrast, metal is not recommended for restorative home design. These findings contribute to the evidence of the restorative effects of home design.

Comparative Analysis of Vegetable and Mineral Oil-Based Antiadhesive/Hydrophobic Liquids and Their Impact on Wood Properties

The unavailability of biodegradable preservatives is one of the major setbacks in the construction industry. With this in mind, our study focused on the analysis and comparison of two hydrophobic liquids, one vegetable oil-based (VOA) and the other mineral oil-based (MOA), and subsequently applying the same on three types of wood. The comparison of the vegetable oil-based (VOA) and mineral oil-based (MOA) hydrophobic liquids revealed that VOA was characterized by an 83.4% susceptibility to aerobic biodegradation, while MOA was considerably more resistant (47.80%). Based on the conducted contact angle measurements, it was observed that the wettability of pine and oak wood decreased after the application of both VOA (for pine-twice; for oak-by 38%) and MOA (for pine-more than two times; for oak-by 49%), while in the case of aspen, the same was increased (after the application of VOA-by 20%; after the application of MOA-by 2%). The observed depth of penetration into the structure of the impregnated wood was lower for the VOA impregnant as compared to the MOA impregnant. This result persisted in all types of wood used in the experiment. Observations of the process of water absorption during soaking revealed that VOA was more beneficial in terms of lowering water absorption into the material, regardless of wood type. The overall results were better for VOA, which lowered the mass of soaked wood by between 19.73 and 66.90%.

Raman micro-spectroscopy of two types of acetylated Norway spruce wood at controlled relative humidity

Water is a key element for wood performance, as water molecules interact with the wood structure and affect important material characteristics such as mechanical properties and durability. Understanding wood-water interactions is consequently essential for all applications of wood, including the design of wood materials with improved durability by chemical modification. In this work, we used Raman micro-spectroscopy in combination with a specially designed moisture chamber to map molecular groups in wood cell walls under controlled moisture conditions in the hygroscopic range. We analyzed both untreated and chemically modified (acetylated to achieve two different spatial distributions of acetyl groups within the cell wall) Norway spruce wood. By moisture conditioning the specimens successively to 5, 50, and 95% relative humidity using deuterium oxide (D₂O), we localized the moisture in the cell walls as well as distinguished between hydroxyl groups accessible and inaccessible to water. The combination of Raman micro-spectroscopy with a moisturizing system with deuterium oxide allowed unprecedented mapping of wood-water interactions. The results confirm lower moisture uptake in acetylated samples, and furthermore showed that the location of moisture within the cell wall of acetylated wood is linked to the regions where acetylation is less pronounced. The study demonstrates the local effect that targeted acetylation has on moisture uptake in wood cell walls, and introduces a novel experimental set-up for simultaneously exploring sub-micron level wood chemistry and moisture in wood under hygroscopic conditions.

Gold Mine Wooden Artefacts: Multianalytical Investigations for the Selection of Appropriate Consolidation Treatments

Environmental conditions present in mines generally are very favourable to decay; high temperature, high humidity, variable oxygen content, numerous metal-wood connections and the presence of a high content of inorganic compounds typical of mines have a significant impact on the biotic and abiotic degradation factors. The state of conservation of wooden artefacts from the Złoty Stok (Poland) gold mine was investigated using a multi-analytical approach. The aim was to select the conservation treatments that would stop decay and improve the conditions and dimensional stability of the wood. FT-IR and Py-GC/MS were used to assess the state of preservation of lignocellulosic material. ED-XRF and SEM-EDS were used to determine—and XRD to identify crystalline phases—salts and minerals in the wood structure or efflorescence on the surface. Highly degraded lignocellulosic material that had undergone depolymerisation and oxidation was found to be severely contaminated by iron-based mineral substances, mainly pyrite, and in some cases greigite and magnetite. The presence of inorganic salts made it difficult to choose the best consolidating material to reduce the level of decay and improve the dimensional stability of the wood.

Improvement of Surface Coating and Interfacial Properties of Hot-Waxed Wood Using Maleic Anhydride Grafted Polypropylene Wax

Beeswax is used on wood furniture surfaces in China. Beeswax is expensive and has a low melting temperature, and the wax film is easily softened and destroyed. To overcome these problems, a modified polypropylene wax grafted with maleic anhydride, with a high melting temperature and low price, was used in hot-waxed wood. The adhesion, hardness, hydrophobic properties, heat resistance, color, and gloss of hot-waxed woods were also examined. The surface and interfacial properties were characterized by FTIR, XRD, and SEM. The modified polypropylene wax showed a higher melting temperature than beeswax by DSC, and the heat resistance of hot-waxed wood using it was revealed by TG. The adhesion for the modified polypropylene wax hot-waxed wood surface was shown to achieve grade 1. In addition, it maintained original grades in adhesion after soaking in water and was greater than beeswax hot-waxed wood. The hot-waxed wood surfaces become hydrophobic compared with untreated wood, and the hydrophobicity of the modified polypropylene wax hot-waxed wood surfaces, with a decreased water contact angle, were slightly weaker than beeswax hot-waxed wood and polypropylene wax hot-waxed wood. Moreover, in hardness, the modified polypropylene wax hot-waxed wood surfaces (2H) were harder than beeswax hot-waxed wood (3B), representing stronger scratch resistance and performing well in decorative characteristics, such as color and gloss. The results of SEM, FTIR, and XRD showed mechanical and weak chemical bonding between the waxes and the surface of the wood with the presence of wax in a wood structure. Therefore, the modified polypropylene wax could be used in hot-waxed wood with great heat resistance, adhesion, and surface performance. The study is beneficial for the application of wood coatings using synthetic wax in the future.

Moisture Dynamics of Wood-Based Panels and Wood Fibre Insulation Materials

Moisture performance is an important factor determining the resistance of wood-based building materials against fungal decay. Understanding how material porosity and chemistry affect moisture performance is necessary for their efficient use, as well as for product optimisation. In this study, three complementary techniques (X-ray computed tomography, infrared and low-field NMR spectroscopy) are applied to elucidate the influence of additives, manufacturing process and material structure on the liquid water absorption and desorption behaviour of a selection of wood-based panels, thermally modified wood and wood fibre insulation materials. Hydrophobic properties achieved by thermal treatment or hydrophobic additives such as paraffin and bitumen, had a major influence on water absorption and desorption rates. When hydrophobic additives did not play a role, pore distributions and manufacturing process had a decisive influence on the amount and rate of absorption and desorption. In that case, a higher porosity resulted in a higher water absorption rate. Our results show that there is a clear potential for tailoring materials towards specific moisture performance by better understanding the influence of different material characteristics. This is useful both for achieving desired moisture buffering as well as to increase service life of wood-based materials. From a sustainability perspective, fit-for-purpose moisture performance is often easier to achieve and preferred than wood protection by biocide preservative treatments.

Nanoscale Mechanism of Moisture-Induced Swelling in Wood Microfibril Bundles

Understanding nanoscale moisture interactions is fundamental to most applications of wood, including cellulosic nanomaterials with tailored properties. By combining X-ray scattering experiments with molecular simulations and taking advantage of computed scattering, we studied the moisture-induced changes in cellulose microfibril bundles of softwood secondary cell walls. Our models reproduced the most important experimentally observed changes in diffraction peak locations and widths and gave new insights into their interpretation. We found that changes in the packing of microfibrils dominate at moisture contents above 10-15%, whereas deformations in cellulose crystallites take place closer to the dry state. Fibrillar aggregation is a significant source of drying-related changes in the interior of the microfibrils. Our results corroborate the fundamental role of nanoscale phenomena in the swelling behavior and properties of wood-based materials and promote their utilization in nanomaterials development. Simulation-assisted scattering analysis proved an efficient tool for advancing the nanoscale characterization of cellulosic materials.

Biodeterioration Assessment of a Unique Old Pharaonic Kingdom Wooden Statue Using Advanced Diagnostic Techniques

A recently discovered Egyptian wooden statue of King Djedefre was studied together with some surrounding burial soil samples for assessing the statue biodeterioration. The wooden morphological characterisation identified the hardwood Acacia nilotica as the wood type. X-ray diffraction, micro-FT-IR spectroscopy, and scanning electron microscopy with an X-ray spectrometer were used to evaluate the wood deterioration degree and the soil contribution in wood biodeterioration. Microbiological analyses (fluorescent in situ hybridisation and polymerase chain reaction) were also performed to detect the microbial attack on the statue. The prolonged interaction of the statue with the burial environment caused a strong wood decay due to biotic (fungi and bacteria) and abiotic factors (e.g., humidity fluctuations of the burial environment), which caused the severe cracking and collapsing of the wood structures. The analyses of the burial soil mineral composition were relevant for obtaining an overall picture of the statue deterioration. The results are useful for planning the right conservation procedures for this very particular and important wooden statue. Furthermore, analysis of the woody cell wall will help in the selection of appropriate consolidation and recovery treatments. Because the statue is a unique single piece of wood, and the morphological observations indicated that it is a bald woman in a sitting position, this statue will provide new and interesting knowledge of Egyptian culture.

Review of Wood Modification and Wood Functionalization Technologies

Wood modifications are becoming popular as a way to enhance the performance of wood, either to make it more durable, improve the performance of wood, or give it new functionality as a multifunctional or smart material. While wood modifications have been examined since the early 1900s, the topic has become a dominant area of study in wood science over the past decade. This review summarizes recent advances and provides future perspective on a selection of wood modifications, i.e., the methods that are currently commercialized (acetylation, furfurylation, and thermal modification), a rediscovered ancient practice (charring), a family of polymerization modifications that have so far made it to the pilot scale, and examples of novel wood-based functional materials explored at laboratory scale.

Conditions Influencing Mould Growth for Effective Prevention of Wood Deterioration Indoors

Effective prevention of mould growth indoors is still an important topic considering that mould growth is frequently observed in buildings, it causes serious health hazards and can irreversibly damage infected objects. Several studies have been conducted and mould growth models developed. Despite that, some potentially important aspects such as water damage and spore contamination have received only little attention. The objective of the present study was to investigate the effect of the initial moisture content of wood and spore contamination on mould development indoors. The mould tests were performed in constant temperature (10, 20 and 30 °C) and relative humidity (91% and 97%) conditions. The results show that wetting of wood specimens prior to the test significantly accelerates mould growth at a temperature of 10 °C. For the other temperatures, the effect was insignificant. Similar results were obtained for the test involving dry (conditioned at RH 50%) and conditioned specimens (RH 91% or RH 97%). The results regarding initial spore contamination show that significantly longer periods are required for mould to develop without spore contamination at 10 °C and 20 °C, while at 30 °C the effect is relatively small.

Water is a preservative of microbes

Water is the cellular milieu, drives all biochemistry within Earth's biosphere and facilitates microbe-mediated decay processes. Instead of reviewing these topics, the current article focuses on the activities of water as a preservative-its capacity to maintain the long-term integrity and viability of microbial cells-and identifies the mechanisms by which this occurs. Water provides for, and maintains, cellular structures; buffers against thermodynamic extremes, at various scales; can mitigate events that are traumatic to the cell membrane, such as desiccation-rehydration, freeze-thawing and thermal shock; prevents microbial dehydration that can otherwise exacerbate oxidative damage; mitigates against biocidal factors (in some circumstances reducing ultraviolet radiation and diluting solute stressors or toxic substances); and is effective at electrostatic screening so prevents damage to the cell by the intense electrostatic fields of some ions. In addition, the water retained in desiccated cells (historically referred to as 'bound' water) plays key roles in biomacromolecular structures and their interactions even for fully hydrated cells. Assuming that the components of the cell membrane are chemically stable or at least repairable, and the environment is fairly constant, water molecules can apparently maintain membrane geometries over very long periods provided these configurations represent thermodynamically stable states. The spores and vegetative cells of many microbes survive longer in the presence of vapour-phase water (at moderate-to-high relative humidities) than under more-arid conditions. There are several mechanisms by which large bodies of water, when cooled during subzero weather conditions remain in a liquid state thus preventing potentially dangerous (freeze-thaw) transitions for their microbiome. Microbial life can be preserved in pure water, freshwater systems, seawater, brines, ice/permafrost, sugar-rich aqueous milieux and vapour-phase water according to laboratory-based studies carried out over periods of years to decades and some natural environments that have yielded cells that are apparently thousands, or even (for hypersaline fluid inclusions of mineralized NaCl) hundreds of millions, of years old. The term preservative has often been restricted to those substances used to extend the shelf life of foods (e.g. sodium benzoate, nitrites and sulphites) or those used to conserve dead organisms, such as ethanol or formaldehyde. For living microorganisms however, the ultimate preservative may actually be water. Implications of this role are discussed with reference to the ecology of halophiles, human pathogens and other microbes; food science; biotechnology; biosignatures for life and other aspects of astrobiology; and the large-scale release/reactivation of preserved microbes caused by global climate change.

Enhanced water uptake in the longitudinal direction by shiitake mycelium in shiitake cultivation logs: water content distribution in logs measured by magnetic resonance imaging

In the cultivation of shiitake mushrooms (Lentinula edodes), the farmer needs to know the time needed to water in order to adjust the water content of the logs. To study the enhanced water uptake in the longitudinal direction by shiitake mycelium in shiitake cultivation logs, six dried test logs (Quercus serrata, diameter of 38 to 48 mm, length of 110 to 118 mm) were used. Three test logs had shiitake mycelium grown on them, and the remaining three test logs had mold generated on them. Liquid water was supplied to the bottom surface of the test log which had its longitudinal direction along the line of gravity. Water content distribution in the logs was measured in chronological order using magnetic resonance imaging (MRI) with 1 Tesla. The calibration curve for converting the signal intensity of the MR image into the water content in the test log was determined by cutting the test log at 5-mm intervals and measuring the water content distribution using the mass method. Spatial distribution of the water content of the test log without shiitake mycelium depending on the cumulative water supply time was obtained, and the distribution shape was always concave corresponding to the exact solution of an unsteady one-dimensional diffusion equation with one diffusion coefficient. In the case of the test log in which shiitake mycelium grew, within a few hours after liquid water supply the water content increased in the whole region where shiitake mycelium grew, and the shape of the water content distribution in the longitudinal direction became convex. Based on observation of water penetration into logs by MRI and an optical microscope, it is believed that the driving force behind increased rise in liquid water in the longitudinal direction in the test log is the capillary force acting in vessels.

Efficient Wood Hydrophobization Exploiting Natural Roughness Using Minimum Amounts of Surfactant-Free Plant Oil Emulsions

Wood in service requires protection from excessive moisture. Herein, we demonstrate that efficient surface hydrophobization can be provided with small amounts of biobased oils, benefitting from the hierarchical roughness inherent to wood surfaces. The developed technique involves coating spruce wood with surfactant-free emulsions based on tung oil, linseed oil, or a linseed oil-based long oil alkyd resin. The ζ-potential of the emulsions was determined by electrophoretic mobility measurements. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and spectrophotometry were used to study coated surfaces. XPS measurements confirmed the presence of the tung oil coatings. Tung oil emulsions were effective at concentration levels as low as 0.04 wt % oil content, roughly equivalent to 0.04 g m-2 and led to static water contact angles reaching up to >130°. SEM imaging and AFM measurements provide evidence that the micro- and nanostructures inherent to wood enhance the hydrophobization effect of the obtained coatings. A further benefit of the method lies in only minimal effects of the coating on the surface color and gloss. Thus, the mass-efficient process following several of the principles of green engineering led to improved water repellency while not affecting the visual appearance of the coated wood.

Drying Stress and Strain of Wood: A Review

Wood drying stress causes various drying defects, which result from the wood microstructure and the transfer of heat and mass during the drying. It is the fundamental way to solve the problem of defects to clarify the law and mechanism of wood stress and strain development during drying. In this paper, based on the defects of wood drying, the theory and experimental testing methods of drying stress and strain were summarized. Meanwhile, artificial neural networks (ANN) and their application in the wood drying field were also investigated. The traditional prong and slicing methods were used practically in the research and industry of wood drying, but the stress changes in-process cannot be trapped. The technologies of image analysis and near-infrared spectroscopy provide a new opportunity for the detection of drying stress and strain. Hence, future interest should be attached to the combination of the theory of heat and mass transfer and their coupling during drying with the theory of microscopic cell wall mechanics and macroscopic drying. A more complete image acquisition and analysis system should be developed to realize the real-time monitoring of drying strain and cracking, practically. A more feasible and reasonable prediction model of wood drying stress and strain should be established to achieve the accuracy of the prediction.

Estimating the Service Life of Timber Structures Concerning Risk and Influence of Fungal Decay—A Review of Existing Theory and Modelling Approaches

Wood is a renewable resource and a promising construction material for the growing bio-based economy. Efficiently utilising wood in the built environment requires a comprehensive understanding of the dynamics regarding its usability. Durability is an essential property to consider, as various types of exposure create conditions for the deterioration of wood through biotic and abiotic agents. Biodegradable materials introduce increased complexity to construction and design processes, as material decomposition during a structure’s lifetime presents a physical risk to human health and safety and costs related to repairs and maintenance. Construction professionals are thus tasked with utilising wooden elements to accentuate the material’s beneficial properties while reducing the risk of in-service decomposition. In this paper, only the cause and effect of fungal induced decay on the service life of wooden buildings and other wood-based construction assets are reviewed. The service life of wood components can thus be extended if suitable growing conditions are controlled. Multiple existing modelling approaches are described throughout the text, with special attention given to the two most comprehensive ones; TimberLife and the WoodExter. In choosing an appropriate model for a specific application, the authors recommend evaluating the model’s regional specificity, complexity, practicality, longevity and adaptability.

Wood Modification as a Tool to Understand Moisture in Wood

Moisture plays a central role in the performance of wood products because it affects important material properties such as the resistance to decomposition, the mechanical properties, and the dimensions. To improve wood performance, a wide range of wood modification techniques that alter the wood chemistry in various ways have been described in the literature. Typically, these modifications aim to improve resistance to decomposition, dimensional stability, or, to introduce novel functionalities in the wood. However, wood modification techniques can also be an important tool to improve our understanding of the interactions between wood and moisture. In this review, we describe current knowledge gaps in our understanding of moisture in wood and how modification has been and could be used to clarify some of these gaps. This review shows that introducing specific chemical changes, and even controlling the distribution of these, in combination with the variety of experimental methods available for characterization of moisture in wood, could give novel insights into the interaction between moisture and wood. Such insights could further contribute to applications in several related fields of research such as how to enhance the resistance to decomposition, how to improve the performance of moisture-induced wooden actuators, or how to improve the utilization of wood biomass with challenging swelling anisotropy.

Genome-based engineering of ligninolytic enzymes in fungi

Background

Many fungi grow as saprobic organisms and obtain nutrients from a wide range of dead organic materials. Among saprobes, fungal species that grow on wood or in polluted environments have evolved prolific mechanisms for the production of degrading compounds, such as ligninolytic enzymes. These enzymes include arrays of intense redox-potential oxidoreductase, such as laccase, catalase, and peroxidases. The ability to produce ligninolytic enzymes makes a variety of fungal species suitable for application in many industries, including the production of biofuels and antibiotics, bioremediation, and biomedical application as biosensors. However, fungal ligninolytic enzymes are produced naturally in small quantities that may not meet the industrial or market demands. Over the last decade, combined synthetic biology and computational designs have yielded significant results in enhancing the synthesis of natural compounds in fungi.

Main body of the abstract

In this review, we gave insights into different protein engineering methods, including rational, semi-rational, and directed evolution approaches that have been employed to enhance the production of some important ligninolytic enzymes in fungi. We described the role of metabolic pathway engineering to optimize the synthesis of chemical compounds of interest in various fields. We highlighted synthetic biology novel techniques for biosynthetic gene cluster (BGC) activation in fungo and heterologous reconstruction of BGC in microbial cells. We also discussed in detail some recombinant ligninolytic enzymes that have been successfully enhanced and expressed in different heterologous hosts. Finally, we described recent advance in CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)-Cas (CRISPR associated) protein systems as the most promising biotechnology for large-scale production of ligninolytic enzymes.

Short conclusion

Aggregation, expression, and regulation of ligninolytic enzymes in fungi require very complex procedures with many interfering factors. Synthetic and computational biology strategies, as explained in this review, are powerful tools that can be combined to solve these puzzles. These integrated strategies can lead to the production of enzymes with special abilities, such as wide substrate specifications, thermo-stability, tolerance to long time storage, and stability in different substrate conditions, such as pH and nutrients.

The Effect of Acetylation on Iron Uptake and Diffusion in Water Saturated Wood Cell Walls and Implications for Decay

Acetylation is widely used as a wood modification process that protects wood from fungal decay. The mechanisms by which acetylation protects wood are not fully understood. With these experiments, we expand upon the literature and test whether previously observed differences in iron uptake by wood were a result of decreased iron binding capacity or slower diffusion. We measured the concentration of iron in 2 mm thick wood sections at 0, 10, and 20% acetylation as a function of time after exposure to iron solutions. The iron was introduced either strongly chelated with oxalate or weakly chelated with acetate. The concentrations of iron and oxalate in solution were chosen to be similar to those found during brown rot decay, while the concentration of iron and acetate matched previous work. The iron content of oxalate-exposed wood increased only slightly and was complete within an hour, suggesting little absorption and fast diffusion, or only slight surface adsorption. The increase in iron concentration from acetate solutions with time was consistent with Fickian diffusion, with a diffusion coefficient on the order of 10−16 m2 s−1. The rather slow diffusion rate was likely due to significant binding of iron within the wood cell wall. The diffusion coefficient did not depend on the acetylation level; however, the capacity for iron absorption from acetate solution was greatly reduced in the acetylated wood, likely due to the loss of OH groups. We explored several hypotheses that might explain why the diffusion rate appears to be independent of the acetylation level and found none of them convincing. Implications for brown rot decay mechanisms and future research are discussed.

Combining scattering analysis and atomistic simulation of wood-water interactions

Molecular-scale interactions between water and cellulose microfibril bundles in plant cell walls are not fully understood, despite their crucial role for many applications of plant biomass. Recent advances in X-ray and neutron scattering analysis allow more accurate interpretation of experimental data from wood cell walls. At the same time, microfibril bundles including hemicelluloses and water can be modelled at atomistic resolution. Computing scattering patterns from atomistic models enables a new, complementary approach to decipher some of the most fundamental questions at this level of the hierarchical cell wall structure. This article introduces studies related to moisture behavior of wood with small/wide-angle X-ray/neutron scattering and atomistic simulations, recent attempts to combine these two approaches, and perspectives and open questions for future research using this powerful combination. Finally, we discuss the opportunities of the combined method in relation to applications of lignocellulosic materials.

Natural Compounds for Wood Protection against Fungi-A Review

Wood is a renewable, versatile material with multiple applications and the largest terrestrial pool of sequestered carbon. However, it is susceptible to degradation, mainly caused by wood-decaying fungi. Since several traditional wood preservatives have been banned owing to their detrimental effects on humans and the environment, extending the lifespan of wood products using new generation natural preservatives is an imperative from the perspectives of human health and environmental protection. Several natural compounds of plant and animal origin have been tested for their fungicidal properties, including essential oils, tannins, wood extractives, alkaloids, propolis or chitosan; and their enormous potential in wood protection has been shown. Although they are not free of limitations, the potential methods to overcome their drawbacks and enhance their bioactivity already exist, such as co-impregnation with different polymers, cross-linkers, metal chelators or antioxidants. The presence of the discrepancies between laboratory tests and the field performance, as well as legislation-related problems resulting from the lack of standards defining the quality and performance of natural protective formulations, however, create an urgent need for further thorough research and arrangements. The collaboration with other industries interested in the utilisation of natural active compounds will reduce the associated costs, thus, will facilitate the successful implementation of alternative antifungal agents.

Innovation in Wood Preservation

The wood preservation industry has depended on toxicity as a mechanism of effectiveness against decay fungi to extend the life of wood used in adverse conditions. An alternative to toxicity, however, is to study and understand the mechanism of fungal attack and stop it before it can start. Knowing that fungi need moisture for colonization, a new approach to wood preservation is to lower the cell wall moisture content below that needed for fungal attack. Acetylation chemistry is known to reduce the moisture content in the cell wall, and it was used to study moisture levels in the bulk cell wall and in the isolated cell wall polymers. Resistance to brown-rot was determined using a 12-week soil block test with Gloeophyllum trabeum. Weight loss was measured and an analysis of what was lost was determined.

Hydrophobic and Hydrophilic Extractives in Norway Spruce and Kurile Larch and Their Role in Brown-Rot Degradation

Extractives found in the heartwood of a moderately durable conifer (Larix gmelinii var. japonica) were compared with those found in a non-durable one (Picea abies). We identified and quantified heartwood extractives by extraction with solvents of different polarities and gas chromatography with mass spectral detection (GC-MS). Among the extracted compounds, there was a much higher amount of hydrophilic phenolics in larch (flavonoids) than in spruce (lignans). Both species had similar resin acid and fatty acid contents. The hydrophobic resin components are considered fungitoxic and the more hydrophilic components are known for their antioxidant activity. To ascertain the importance of the different classes of extractives, samples were partially extracted prior to subjection to the brown-rot fungus Rhodonia placenta for 2-8 weeks. Results indicated that the most important (but rather inefficient) defense in spruce came from the fungitoxic resin, while large amounts of flavonoids played a key role in larch defense. Possible moisture exclusion effects of larch extractives were quantified via the equilibrium moisture content of partially extracted samples, but were found to be too small to play any significant role in the defense against incipient brow-rot attack.

Quality Control of Thermally Modified Timber Using Dynamic Vapor Sorption (DVS) Analysis

The importance of thermal modification is increasing worldwide. Increased use of thermally modified timber (TMT) has resulted in a need for reliable quality control, comprising control of variation of the production within defined limits, allowing third-party control in the case of certification and the regulation of customer complaints and claims. Techniques are thus needed to characterise the modification of quality in terms of improved target properties of TMT during industrial production, and of TMT products that have been in service for an arbitrary time. In this study, we aimed to utilise dynamic vapor sorption (DVS) for this purpose. Norway spruce (Picea abies) and European beech (Fagus sylvatica) samples were thermally modified at different temperatures according to different heat treatment techniques: (1) the Silvapro process based on an initial vacuum; (2) an air heat treatment, whereby samples were wrapped in aluminium foil; (3) thermal modification of wood samples in the ambient atmosphere in a laboratory oven. Wood samples from closed processes were analysed for validation. TMT was characterised with respect to mass loss, colour and density. Mass loss of wood due to modification (MLTM) was correlated with factors derived from DVS analysis. The present DVS measurements suggest that the equilibrium wood moisture content (EMC95% RH), the time to reach 10% wood moisture content (t10% MC), and the elongation factor, c, derived from a logarithmic function, can serve as alternative parameters to characterise the quality of several thermal modification processes. Further studies are recommended using other wood species, different modification processes and further parameters gained from DVS measurements to understand the robustness and the predictive power of the applied technique.