Ion release in ceramic bearings for total hip replacement: Results from an in vitro and an in vivo study

Metallic Implants Used in Lumbar Interbody Fusion

Over the last decade, pedicle fixation systems have evolved and modifications in spinal fusion techniques have been developed to increase fusion rates and improve clinical outcomes after lumbar interbody fusion (LIF). Regarding materials used for screw and rod manufacturing, metals, especially titanium alloys, are the most popular resources. In the case of pedicle screws, that biomaterial can be also doped with hydroxyapatite, CaP, ECM, or tantalum. Other materials used for rod fabrication include cobalt-chromium alloys and nitinol (nickel-titanium alloy). In terms of mechanical properties, the ideal implant used in LIF should have high tensile and fatigue strength, Young's modulus similar to that of the bone, and should be 100% resistant to corrosion to avoid mechanical failures. On the other hand, a comprehensive understanding of cellular and molecular pathways is essential to identify preferable characteristics of implanted biomaterial to obtain fusion and avoid implant loosening. Implanted material elicits a biological response driven by immune cells at the site of insertion. These reactions are subdivided into innate (primary cellular response with no previous exposure) and adaptive (a specific type of reaction induced after earlier exposure to the antigen) and are responsible for wound healing, fusion, and also adverse reactions, i.e., hypersensitivity. The main purposes of this literature review are to summarize the physical and mechanical properties of metal alloys used for spinal instrumentation in LIF which include fatigue strength, Young's modulus, and corrosion resistance. Moreover, we also focused on describing biological response after their implantation into the human body. Our review paper is mainly focused on titanium, cobalt-chromium, nickel-titanium (nitinol), and stainless steel alloys.

Oxide Bioceramic Composites in Orthopedics and Dentistry

Ceramic composites based on alumina and zirconia have found a wide field of application in the present century in orthopedic joint replacements, and their use in dentistry is spreading. The development of this class of bioceramic composites was started in the 1980s, but the first clinical applications of the total hip replacement joint were introduced in the market only in the early 2000s. Since then, several composite systems were introduced in joint replacements. These materials are classified as Zirconia-Toughened Alumina if alumina is the main component or as Alumina-Toughened Zirconia when zirconia is the main component. In addition, some of them may contain a third phase based on strontium exa-aluminate. The flexibility in device design due to the excellent mechanical behavior of this class of bioceramics results in a number of innovative devices for joint replacements in the hip, the knee, and the shoulder, as well in dental implants. This paper gives an overview of the different materials available and on orthopedic and dental devices made out of oxide bioceramic composites today on the market or under development.

Bone Cysts and Osteolysis in Ankle Replacement

BACKGROUND

Total ankle replacements (TARs) have higher rates of osteolysis than hip or knee replacements. It is unclear whether this is a pathologic immunologic process in response to wear debris, or expansion of pre-existing osteoarthritic bone cysts. We aimed to determine the incidence of bone cysts in patients with end-stage ankle arthritis prior to surgery and review the literature on bone cysts and osteolysis in relation to TAR.

METHODS

This is a descriptive/prevalence study in which all patients with end-stage ankle arthritis underwent plain radiographic imaging and computed tomographic (CT) scans prior to TAR surgery. Their imaging was assessed for the presence of cysts, measured on sagittal, axial, and coronal slices of the CT scan at the widest diameter. All cysts that would be removed as a result of the bone resection for the implant were excluded using digital analysis software. We assessed 120 consecutive patients with mean age of 63.4 years.

RESULTS

Seventeen patients (14%) did not have any bone cysts based on CT images. Ten patients (8%) had cysts that would have been completely removed by surgery, leaving 93 patients for analysis (78%). In 60% of these cases, the cysts were not seen on the plain radiographs. In 39 patients (33%), the cysts were greater than 5 mm in size. The medial (36%) and lateral malleoli (33%) were the most common location for the cysts (mean diameter 4.6±2.0 and 4.2±2.3 mm, respectively).

CONCLUSION

Bone cysts outside of the resection margins for a TAR were present in 78% of patients with ankle arthritis prior to undergoing surgery. In 30% of cases, cysts were greater than 5 mm in size. In 60% of cases, the cysts were not seen on plain radiographs. Preoperative 3-dimensional imaging can provide a foundation to observe and quantify cyst presence, expansion, and time of onset in the postoperative setting.

LEVEL OF EVIDENCE

Level IIc, diagnostic/prevalence study.

Biological Reactions to Metal Particles and Ions in the Synovial Layer of Mice

Metal particles and ions released from implants not only have a fundamental effect on the longevity of total joint replacements, but can also be disseminated to remote organs. Periprosthetic tissues harvested during revision surgeries mainly reflect end-stage failure but may not adequately reveal initial biological reactions and systemic side effects. Therefore, primary reactions caused by metal particles and ions were investigated in an established murine model. Left knee joints in three groups, each consisting of ten female BALB/c mice, received injections of metal ions (MI), metal particles (MP) and phosphate-buffered saline (PBS) (control). Seven days after the injection, immunohistochemical analyses of the synovial layer were performed with respect to some biological markers including Tumor necrosis factor -α (TNF-α), Interleukin-6 (IL-6), Interleukin-1β (IL-1β), Cluster of Differentiation 45 (CD45), Cluster of Differentiation 68 (CD68) and Cluster of Differentiation 3(CD3). The MP group showed significantly enhanced proinflammatory cytokine expression (TNF-α, IL-6 and IL-1β) compared with the other groups (p < 0.05). Interestingly, CD3, as a marker for T lymphocytes, did not increase in any of the groups. The MI group showed a significantly increased expression of CD45 compared with the control group (p < 0.05). Therefore, during the primary process, metal particles have stronger pro-inflammatory potential than metal ions, and T lymphocytes did not seem to be activated in our murine model. Systemic reactions caused by metal particles and ions were found by observing the untreated right knees.

Pleomorphic clinical spectrum of metallosis in total hip arthroplasty

PURPOSE

To summarize the biological effects of metal debris from hip arthroplasties which characterize a polymorphic clinical spectrum of local and remote manifestation.

METHODS

Retrospective study. Patient, implant, and surgical characteristics were collected, including implant survival, clinical manifestations, cause of arthroplasty revision or implant failure, and peri- and intra-operative complications. The primary endpoint was implant survivorship. Hip revision arthroplasty was decided considering clinical signs and symptoms, abnormal imaging (XR, MR, TC, echotomography, scintigraphy), and blood metal ion level. An ad hoc electronic form was used to collect demographic, epidemiological, and clinical variables. In-between group comparisons of quantitative variables were performed with the Student t test and the Mann-Whitney for parametric and non-parametric variables, respectively. Logistic regression analyses were carried out to assess the relationship between clinical and radiographic characteristics and stem and cup revision. Radiographic measurements of implant positioning validity and reliability were assessed using Krippendorff's alpha reliability coefficient. The statistical software STATA version 15 (StatsCorp, TX) was used to perform statistical computations.

RESULTS

In this MoM THA series, the most incident cause of implant failure was ARMD in 11 out of 14 (78.6%) patients. All clinical failure manifestations, revision surgery highlights, and intra-operative findings are reported.

CONCLUSIONS

The local adverse reactions include lesions of different clinical relevance from small asymptomatic soft tissue lesions to dramatic osteolysis, necrosis, effusion, and growing masses which can cause secondary pathological effects. Symptoms of systemic toxicity are rarely described but may have been largely unreported in literature. Despite the extensive literature on the topic, the patient's management is still uncertain and challenging. Every metallic implant (e.g., screws, plates, spinal instrumentations) has a potential local or systemic adverse effect. Organizing a national registry of arthroplasty should be mandatory, in order to collect data about the patients, the surgery, the implanted device (with a careful post-marketing tracking), and the follow-up for all the procedures performed at a national level. The data collected in the registry will allow to analyze the implant survival and to better recognize the undesirable and sometimes unexpected effects of different biomaterials on the whole body.