A novel hydrogel based on agricultural waste for removal of hazardous dyes from aqueous solution and reuse process in a secondary adsorption

Efficient removal of cationic dyes using lemon peel-chitosan hydrogel composite: RSM-CCD optimization and adsorption studies

The most prominent and easily identifiable factor of water purity is its colour, which may be both physically undesirable, and act as an alert towards potential environmental contamination. The current study describes the optimum synthesis technique for Lemon Peel-Chitosan hydrogel using the Response Surface Methodology integrated Central composite Design (RSM-CCD). This adsorbent is both environmentally friendly and cost-effective. The hydrogel exhibited a maximal dye removal capacity of 24.984, 24.788, 24.862, 23.483, 24.409, and 24.726 mg g-1, for 10 mg L-1 aqueous medium of Safranin O, Methylene blue, Basic fuchsin, Toluidine blue, Brilliant green and Crystal violet, respectively. The adsorption kinetics and isotherm data suggest that the Pseudo second-order kinetic and Freundlich adsorption isotherm models precisely represent the respective behaviour of all the dyes. The thermodynamic viability of the process is determined by the values of ΔG, ΔH, and ΔS. The probable mechanism of adsorption was the electrostatic interaction between the dye molecules and the hydrogel. The regenerated hydrogel had removal efficiencies of over 80 % even after enduring six cycles. Hence, the exceptional recyclability and utility of the adsorbent show their sustainability for wastewater treatment in textile factories.

Sponge-like biodegradable polypyrrole-modified biopolymers for selective adsorption of basic red 46 and crystal violet dyes from single and binary component systems

Recently, several researchers have been trying to reduce the ecological effects of water pollution by considering the use of biodegradable materials that prevent the generation of secondary pollution in our environment and enable water reuse. Here, new biodegradable hydrogels based on alginate (Alg), gelatin (Gel) and polypyrrole (PPy) were successfully implemented to remove two known highly toxic cationic dyes from wastewater. The design process was performed in two steps: in-situ polymerization of polypyrrole within the Alg/Gel mixture, followed by hydrogel formation. Biocomposites showed promising efficacy for the removal of both basic red 46 (BR46) and crystal violet (CV) dyes from real and demineralized water samples. However, Alg-Gel-PPy hydrogel showed better selectivity for BR46 than for CV as compared to the pristine Alg-Gel hydrogel. Adsorption of both pollutants on biocomposite hydrogel beads followed the Langmuir isotherm and pseudo-second order kinetic models. Besides, the highest adsorption capacities (125 mg g-1 for BR46 and 88.5 mg g-1 for CV) were obtained for the Alg-Gel-PPy hydrogel, compared with those determined for PPy-free hydrogel (103.09 mg g-1 for BR46 and 86.96 mg g-1 for CV) and remained at a satisfactory level for five adsorption-desorption cycles. Finally, the obtained hydrogels showed excellent biodegradability by natural soil microorganisms, with 91 % decomposition.

Newly designed acrylamide derivative-based pH-responsive hydrogel-urease bioconjugates: synthesis and catalytic urea hydrolysis

Jack bean urease, the first nickel metalloenzyme, and crystallized enzymes have historical significance due to their several applications in the biomedical and other fields. For the first time, cross-linker free pH-responsive hydrogel-urease bioconjugates have been reported. Without the use of divinyl benzene or divinyl acrylamide derivatives, urease was immobilized inside the hydrogel matrix and various grades of bioconjugates were synthesized. The hydrogel-urease bioconjugate exhibits excellent swelling-deswelling and pH-responsive characteristics without affecting the urease enzyme. The pH-responsive bioconjugates were characterized by FT-IR, powder XRD, SEM, TGA, and UV-vis spectroscopy. Urea hydrolysis and enzyme affinity have been investigated at pH 4, pH 7, and pH 11 using bioconjugates and free urease. At basic pH, BCs showed excellent enzyme activity. In summary, this technique is effective for stabilizing biomacromolecules at different pHs for a variety of real applications.

Gamma irradiation synthesis of pectin- based biohydrogels for removal of lead cations from simulated solutions

Bio-based hydrogels (denoted as PC-PAAc/GA) comprised of Pectin (PC) and polyacrylic acid (PAAc) reinforced with different ratios of gallic acid (GA) were prepared by gamma radiation at irradiation dose 20 kGy. The prepared hydrogels were investigated by different analytical tools. The swelling performance was studied versus time, pH of the medium and gallic acid content. The experimental data depicted that the swelling increases with pH of medium until the equilibrium of swelling after 350 min. The maximum swelling was attained at pH10 for both PC-PAAc and PC-PAA/GA1.5. Also, the data reveal that the incorporation of GA in the hydrogel matrix enhanced the swelling performance of the hydrogel up to an optimum value of GA, i.e. PC-PAA/GA1.5. Further increase in GA concentration leads to formation of a highly crosslinked structure with reduced swelling. The results demonstrated that the prepared hydrogels displayed excellent antibacterial activity against gram + ve bacteria (E.coli) and gram-ve bacteria (S.aureus). This potent antimicrobial activity is mainly originated from GA which was proved as a strong antibacterial agent. Moreover, the removal performance of the investigated hydrogels was verified towards Pb+2 cation as one of the most poisonous heavy metals. The data revealed that the maximum removal percentage of Pb (II) was attained by PC-PAAc/GA1.5 hydrogel (90 mg g−1). The correlation coefficients of the Langmuir model are too higher than that of the Freundlich model that assumed the adsorption of lead cations is mainly a chemical process.

Synthesis of hydrogels for adsorption of anionic and cationic dyes in water: ionic liquid as a crosslinking agent

In this work, we synthesized an ionic liquid (IL)—(Dimethylamino)ethyl Methacrylate maleate ([DMAEMA]MA) as the crosslinker, through one-pot to synthesized hydrogels with high adsorption capacity for dye in water. Both anionic dyes (methylene blue, rhodamine B) and cationic dyes (congo red, eosin B) could be adsorbed by this type of hydrogel with different adsorption mechanism, and its adsorption capacity for methylene blue (MB), rhodamine B (RHB), congo red (CR), eosin B (EB) were 489.1, 463.2, 465.5 and 462 mg/g (amount of dye adsorbed per gram of hydrogel), respectively. The surface structure of the hydrogel before and after adsorption was observed and compared by scanning electron microscope (SEM). After studying the adsorption isotherms of the hydrogel adsorbent, it was found that the hydrogel adsorbent had two adsorption mechanisms. This was not found in reported literatures previously.

Bio-sorbents, industrially important chemicals and novel materials from citrus processing waste as a sustainable and renewable bioresource: A review

Citrus waste includes peels, pulp and membrane residue and seeds, constituting approximately 40-60% of the whole fruit. This amount exceeds ~110-120 million tons annually worldwide. Recent investigations have been focused on developing newer techniques to explore various applications of the chemicals obtained from the citrus wastes. The organic acids obtained from citrus waste can be utilized in developing biodegradable polymers and functional materials for food processing, chemical and pharmaceutical industries. The peel microstructures have been investigated to create bio-inspired materials. The peel residue can be processed to produce fibers and fabrics, 3D printed materials, carbon nanodots for bio-imaging, energy storage materials and nanostructured materials for various applications so as to leave no waste at all. The article reviews recent advances in scientific investigations to produce valuable products from citrus wastes and possibilities of innovating future materials and promote zero remaining waste for a cleaner environment for future generation.

Preparation of a magnetic reduced-graphene oxide/tea waste composite for high-efficiency sorption of uranium

The preparation and application of adsorptive materials with low cost and high-efficiency recovery of uranium from nuclear waste is necessary for the development of sustainable, clean energy resources and to avoid nuclear pollution. In this work, the capacity of tea waste and tea waste hybrids as inexpensive sorbents for uranium removal from water solutions was investigated. Composites of graphene oxide (GO) and tea waste (TW) exhibited a promising adsorption performance for uranium from aqueous solutions. The composites GOTW and magnetic rGO/Fe₃O₄/TW show high adsorption capacities (Q_{m (TW)} = 91.72 mg/g, Q_{m (GOTW)} = 111.61 mg/g and Q_{m (rGO/Fe3O4/TW)} = 104.95 mg/g) and removal rates (~99%) for U(VI). The equilibrium sorption of the adsorbents fitted well to the Langmuir model, and the sorption rate fitted well to a pseudo-second-order kinetic model. The thermodynamic parameters indicated that sorption was spontaneous and favourable. The prepared adsorbents were used for the removal of uranium from real water samples as well. The results revealed that GOTW and rGO/Fe₃O₄/TW can be used to remediate nuclear industrial effluent as a potential adsorbent.

Utilizations of agricultural waste as adsorbent for the removal of contaminants: A review

In recent years, various industrial activities have caused serious pollution to the environment. Due to the low operating costs and high flexibility, adsorption is considered as one of the most effective technologies for pollutant management. Agricultural waste has loose and porous structures, and contains functional groups such as the carboxyl group and hydroxyl group, so it can be invoked as biological adsorption material. Agricultural waste gets the advantages of a wide range of sources, low cost, and renewable. It has a good prospect for the comprehensive utilization of resources when used for environmental pollution control. This article summarized the current research status of agricultural waste in adsorbing pollutants, which pointed out the influencing factors of adsorption, expounded the adsorption mechanism of biological adsorption and introduced the related parameters of adsorption, proposed the application of adsorbents in engineering including adsorption in liquid and gas phases, at the same time it gave the future development prospect of agricultural waste as adsorbent.