Rheological investigation of the viscoelastic thixotropic behavior of synthesized polyethylene glycol-modified polyacrylamide hydrogels using different accelerators

Green synthesis of self-assembly, self-healing, and injectable polyelectrolyte complex hydrogels using chitosan, sulphated polysaccharides, hydrolyzed collagen and nanocellulose

This study introduces a green method for preparing self-assembly hydrogels via polyelectrolyte complex (PEC) coacervation using chitosan, sulphated polysaccharides (chondroitin sulphate or fucoidan), and hydrolyzed collagen, followed by treatments, such as centrifugation, nanocellulose incorporation, algal fucoidan substitution, freezing-thawing, saline solution addition, and dialysis. Chitosan alters the non-gelling characteristics of chondroitin sulphate, fucoidan, and hydrolyzed collagen, initiating quick gelling. This study compared the effects of biopolymer concentrations, pHs, and treatments on hydrogel properties. Hydrogels fabricated using sulphated polysaccharides from different sources demonstrated distinct properties. Nanocellulose incorporation significantly modified the hydrogel performance, with hydrogel containing 4 % nanocellulose showing the lowest E-factor (~1 kg waste/kg product), the highest swelling capacity (up to 766 %), robust rheological strength (storage modulus >20 kPa), interconnected fibrous, highly porous structures, and outstanding thermal stabilities (no significant degradation below 200 °C). The hydrogels also exhibited self-healing and injectable potentials. Centrifugation further improved solid-like behaviours through compacting structures and enhancing interactions. Biopolymer concentrations and pHs had minimal impacts on hydrogel properties. The tailored properties resulting from the biopolymer components and treatments indicated the potential for customizing biomaterial functionality for biomedical applications. The eco-friendly synthesis of PEC hydrogels from marine by-products leverages underutilized renewable resources, contributing to a sustainable bioeconomy.

Influence of Hydroxyapatite and Gelatin Content on Crosslinking Dynamics and HDFn Cell Viability in Alginate Bioinks for 3D Bioprinting

This study investigates how varying concentrations of hydroxyapatite (OHAp) and the addition of gelatin influence the ionic crosslinking time of alginate-based bioinks, as well as the shear stress experienced by neonatal human dermal fibroblasts (HDFn) during extrusion. These factors are crucial for validating bioinks and developing viable 3D bioprinted models. Four bioink formulations were created with a 50/50 ratio of alginate to gelatin, incorporating different calcium phosphate concentrations (0%, 1%, 5%, and 10%). The bioink compositions were confirmed via Fourier Transform Infrared (FT-IR) spectroscopy, and rheological analyses evaluated their pseudoplastic behavior, printability limits, and crosslinking times. The results indicated a notable increase in the consistency index (k) from 0.32 for the 0% OHAp formulation to 0.48 for the 10% OHAp formulation, suggesting improved viscoelastic properties. The elastic modulus recovery after crosslinking rose significantly from 245 Pa to 455 Pa. HDFn experienced a shear stress of up to 1.5436 Pa at the tip during extrusion with the HDFn-ALG5-GEL5-OHAp10 bioinks, calculated at a shear rate as low as 2 s-1. Viability assays confirmed over 70% cell viability 24 h post-extrusion and 92% viability after 7 days for the 10% OHAp formulation, highlighting the potential of hydroxyapatite-enhanced bioinks in tissue engineering applications.

In situ forming hydrogels based on modified gellan gum/chitosan for ocular drug delivery of timolol maleate

In situ forming hydrogels are suitable candidates for increasing drug residence time in ocular drug delivery. In this study, gellan gum (GG) was oxidized to form aldehyde groups and in situ gelling hydrogels were synthesized based on a Schiff-base reaction between oxidized GG (OGG) and chitosan (CS) in the presence of β-glycerophosphate. The effect of OGG and CS concentration on the physical and chemical properties of the resulting hydrogels was investigated. The FT-IR spectroscopy confirmed the chemical modification of OGG as well as the functional groups of the prepared hydrogels. The scanning electron microscope (SEM) revealed the highly porous structure of hydrogels. The obtained hydrogels indicated a high swelling degree and degradability. Also, the rheological studies demonstrated self-healing behavior, shear thinning, thixotropy, and mucoadhesion properties for the developed hydrogels. The results of in vitro and ex vivo studies showed that the timolol-loaded hydrogel with a higher amount of OGG has a higher release rate. Moreover, the MTT cytotoxicity test on bone marrow mesenchymal stem cells (BMSCs) confirmed that developed hydrogels are not toxic. The obtained results revealed that the developed hydrogels can be a desirable choice for the ocular drug delivery of timolol in the treatment of glaucoma.

Dual-Responsive Hydrogels for Mercury Ion Detection and Removal from Wastewater

This study describes the development of a fast and cost-effective method for the detection and removal of Hg2+ ions from aqueous media, consisting of hydrogels incorporating chelating agents and a rhodamine derivative (to afford a qualitative evaluation of the heavy metal entrapment inside the 3D polymeric matrix). These hydrogels, designed for the simultaneous detection and entrapment of mercury, were obtained through the photopolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) and N-vinyl-2-pyrrolidone (NVP), utilizing N,N'-methylenebisacrylamide (MBA) as crosslinker, in the presence of polyvinyl alcohol (PVA), a rhodamine B derivative, and one of the following chelating agents: phytic acid, 1,3-diamino-2-hydroxypropane-tetraacetic acid, triethylenetetramine-hexaacetic acid, or ethylenediaminetetraacetic acid disodium salt. The rhodamine derivative had a dual purpose in this study: firstly, it was incorporated into the hydrogel to allow the qualitative evaluation of mercury entrapment through its fluorogenic switch-off abilities when sensing Hg2+ ions; secondly, it was used to quantitatively evaluate the level of residual mercury from the decontaminated aqueous solutions, via the UV-Vis technique. The ICP-MS analysis of the hydrogels also confirmed the successful entrapment of mercury inside the hydrogels and a good correlation with the UV-Vis method.

Facile fabrication and antibacterial properties of chitosan/acrylamide/gold nanocomposite hydrogel incorporated with Chaetomium globosium extracts from Gingko biloba leaves

Microorganisms are a unique part of our ecosystem because they affect the survival of living organisms. Although pathogenic microorganisms could be detrimental to the plants, animals, and humans, beneficial microbes have provided significant improvement in the growth and development of living organisms. In this study, the fungus Chaetomium globosium was isolated from the medicinal tree Gingko biloba, and then incorporated into a polymerization system to fabricate chitosan/acrylamide/gold (CS/Am/Au) nanocomposite hydrogels. The as-prepared hydrogel displayed increased mechanical strength due to the reinforcement of Au (gold) nanocomposites within the hydrogel matrix. Also, the equilibrium pH responsive swelling rates of the hydrogels gradually increased as the pH increases due to partial acid and basic hydrolysis occurring in the hydrogel as well as formation of hydrogen bond. In addition, the hydrogel demonstrated promising antibacterial activities against selected gram-positive (Staphylococcus epidermidis and Staphylococcus aureus) and gram-negative (Pseudomonas aeruginosa) bacterial strains with an average MIC90 of 0.125 mg/mL at a dosage of 1.0 mg/L. The obtained results are quite promising towards resolving several health challenges and advancing the pharmaceutical industries.

Silica Hydrogels as Platform for Delivery of Hyaluronic Acid

Hyaluronic acid (HA) is chondroprotective and anti-inflammatory drug used clinically for treatment of inflammatory disorders (arthritis, skin diseases, bowel diseases, etc.). In addition, HA is a crucial ingredient in the cosmetic products used to eliminate the unpleasant consequences of inflammatory skin diseases. The main disadvantages that limit its use are its low mechanical properties and its rapid biodegradation. In this paper, silica hydrogels are considered as a promising matrix for HA to improve its properties. The hybrid HA-silica hydrogels were synthesized by the sol-gel method. Morphology of the hydrogels was investigated by optical microscopy and scanning electron microscopy methods. Taking into account their potential applications for topical and injectable delivery, much attention was paid to investigation of deformation properties of the hydrogels under shear, compression, and tension. Their resistance to enzymatic degradation in vitro was estimated. Kinetics and mechanisms of HA release from the hybrid hydrogels in vitro were also studied. It was found that the indicated properties can be controlled by synthesis conditions, HA molecular weight, and its loading in the hydrogels. Silica hydrogels are a prospective platform for the development of new soft formulations and cosmetic compositions of HA with improved pharmacological and consumer properties.

Supramolecular Structure and Mechanical Performance of κ-Carrageenan-Gelatin Gel

In this work, by means of complex physicochemical methods the structural features of a composite κ-carrageenan–gelatin system were studied in comparison with initial protein gel. The correlation between the morphology of hydrogels and their mechanical properties was demonstrated through the example of changes in their rheological characteristics. The experiments carried out with PXRD, SAXS, AFM and rheology approaches gave new information on the structure and mechanical performance of κ-carrageenan–gelatin hydrogel. The combination of PXRD, SAXS and AFM results showed that the morphological structures of individual components were not observed in the composite protein–polysaccharide hydrogels. The results of the mechanical testing of initial gelatin and engineered κ-carrageenan–gelatin gel showed the substantially denser parking of polymer chains in the composite system due to a significant increase in intermolecular protein–polysaccharide contacts. Close results were indirectly followed from the SAXS estimations—the driving force for the formation of the common supramolecular structural arrangement of proteins and polysaccharides was the increase in the density of network of macromolecular chains entanglements; therefore, an increase in the energy costs was necessary to change the conformational rearrangements of the studied system. This increase in the macromolecular arrangement led to the growth of the supramolecular associate size and the growth of interchain physical bonds. This led to an increase in the composite gel plasticity, whereas the enlargement of scattering particles made the novel gel system not only more rigid, but also more fragile.

Hydrogel Nanoarchitectonics: An Evolving Paradigm for Ultrasensitive Biosensing

The integration of nanoarchitectonics and hydrogel into conventional biosensing platforms offers the opportunities to design physically and chemically controlled and optimized soft structures with superior biocompatibility, better immobilization of biomolecules, and specific and sensitive biosensor design. The physical and chemical properties of 3D hydrogel structures can be modified by integrating with nanostructures. Such modifications can enhance their responsiveness to mechanical, optical, thermal, magnetic, and electric stimuli, which in turn can enhance the practicality of biosensors in clinical settings. This review describes the synthesis and kinetics of gel networks and exploitation of nanostructure-integrated hydrogels in biosensing. With an emphasis on different integration strategies of hydrogel with nanostructures, this review highlights the importance of hydrogel nanostructures as one of the most favorable candidates for developing ultrasensitive biosensors. Moreover, hydrogel nanoarchitectonics are also portrayed as a promising candidate for fabricating next-generation robust biosensors.

Effects of Cu2+/Zn2+ on the electrochemical performance of polyacrylamide hydrogels as advanced flexible electrode materials

Previously, solid-state electrode materials have been utilized for the fabrication of energy storage devices; however, their application is impeded by their brittle nature and ion mobility problems. To address issues faced in such a modern era where energy saving and utility is of prior importance, a novel approach has been applied for the preparation of electrode materials based on polyacrylamide hydrogels embedded with reduced graphene oxide and transition metals, namely, Cu²⁺ and Zn²⁺. The fabricated hydrogel exhibits high electrical properties and flexibility that make it a favorable candidate to be used in energy storage devices, where both elastic and electrical properties are desired. For the first time, a multi-cross-linked polyacrylamide hydrogel was constructed and compared in the presence of other electro-active materials such as reduced graphene oxide and transition metals. Polyacrylamide hydrogels embedded with reduced graphene oxide demonstrate excellent electrical properties such as specific capacitance, least impedance, low phase angle shift and AC conductivity of 22.92 F g^-1, 2115 Ω, 2.88° and 0.67 μδ m^-1 respectively as compared to Cu²⁺- and Zn²⁺-loaded hydrogels, which block all available active sites causing an increase in impedance with a parallel decrease in capacitance. The capacitance retention and coulombic efficiency calculated were 88.22% and 77.23% respectively, indicating high stability up to 150 cycles at 0.1 A g^-1. Storage moduli obtained were 10.52 kPa, which infers the more elastic nature of the hydrogel loaded with graphene oxide than that of other synthesized hydrogels.

Injectable Self-Crosslinkable Thiolated Hyaluronic Acid for Stem Cell Therapy of Atopic Dermatitis

Stem cell therapies offer great promise in regenerative medicine to reinstate the normal function of diseased tissue, thereby avoiding the need for replacement. In stem cell therapies, damaged cells are replaced or restored by regulating inflammation and the immune system. However, the low survival rate and local retention of transplanted cells pose a significant challenge. In this study, injectable self-crosslinkable hydrogels using thiol-functionalized hyaluronic acid (HA-SH) were developed to improve the efficacy of mesenchymal stem cells (MSCs) for treating atopic dermatitis (AD)-related inflammatory lesions. The gelation kinetics and mechanical properties of HA-SH hydrogels were easily tuned by varying the concentration of the polymer in the precursor solution before injection. The MSC-laden HA-SH hydrogels exhibited high cell viability (>80%) for 1 week and good in vivo biocompatibility after implantation beneath the mouse skin. Moreover, the MSC-laden HA-SH hydrogel showed increased expression of anti-inflammatory cytokines, which can alleviate the immune response. In an AD animal model, a reduction in epidermal thickness and mast cell infiltration was achieved by applying a self-crosslinkable HA-SH solution including MSCs. This HA-based injectable hydrogel represents a potential carrier of stem cells, and its strong immunomodulation capabilities can be utilized for treating inflammation-related diseases.

Montmorillonite clay and quaternary ammonium silane-reinforced pullulan/agar-based nanocomposites and their properties for packaging applications

Synergistic combinations of pullulan, agar, montmorillonite (MMT) clay, and quaternary ammonium silane (QAS)-based (Pullulan/agar/MMT clay/QAS) active nanocomposites were prepared by a simple, cost-effective method. The Pullulan/agar/MMT clay/QAS nanocomposites were studied via Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analyses. The concentration of MMT clay played a very important role in the properties of the nanocomposites. However, the transparency of the composite was not significantly affected by the addition of MMT clay. The ultraviolet (UV) transmittance of Pullulan/agar/MMT clay/QAS was in the range of 91.4-79.8 at 600 nm. The thermal and mechanical properties were significantly improved by the MMT clay. The tensile strength and elongation at break of the composites were in the range of 23.8-39.7 MPa and 37.2-26.9%, respectively. The long alkyl chain in QAS significantly improved the hydrophobic nature of the Pullulan/agar/MMT clay nanocomposites, impacting the contact angle (66.2-71.2°), water vapor permeability (3.17-2.20 × 10^-9 g/m² Pa·s), and swelling ratio (1837-836%). The combination of Pullulan/agar/MMT clay/QAS had a synergistic effect on the rheological properties. MMT clay and QAS significantly increased the viscosity, storage, and loss modulus of the hydrogel composites. With the addition of QAS, the Pullulan/agar/MMT clay nanocomposites showed good antimicrobial activity against gram-positive and gram-negative pathogens.

Enhanced efficacy of transforming growth factor-β1 loaded an injectable cross-linked thiolated chitosan and carboxymethyl cellulose-based hydrogels for cartilage tissue engineering

Growth factors (GFs) are soluble proteins extracellular that control a wide range of cellular processes as well as tissue regeneration. While transforming growth factor beta-1 (TGF-β1) promotes chondrogenesis, its medical use is restricted by its potential protein instability, which necessitates high doses of the protein, which can result in adverse side effects such as inefficient cartilage formation. In this work, we have developed a novel hydrogel composite based on the polymer, cross-linked thiolated chitosan; TCS and carboxymethyl cellulose; CMC (TCS/CMC) hydrogel system was utilized as injectable TGF-β1 carriers for cartilage tissue engineering applications. Rheological measurements showed that the elastic modulus of TCS/CMC hydrogels with an optimized CMC concentration could reach around 2.5 kPa or higher than their respective viscous modulus, indicating that they behaved like strong hydrogels. Crosslinking significantly alters the overall network distribution, surface morphology, pore size, porosity, gelation time, swelling ratio, water content, and in vitro degradation of the TCS/CMC hydrogels. TCS/CMC hydrogels maintain more than 90% of their weight and retain their original form after 21 days. TGF-β1 released marginally from TCS/CMC hydrogels as incubation time increased, up to 21 days, with around 18.6 ± 0.9% of the drug stored inside the TCS/CMC hydrogels. On day 21, BMSC treated with TGF-β1 in medium or TGF-β1-loaded TCS/CMC hydrogels grew faster than the other groups. For in vivo cartilage repair, full-thickness cartilage defects were induced on rat knees for 8 weeks. The optimal ability of this novel TGF-β1-loaded TCS/CMC hydrogel system was further demonstrated by histological analysis, resulting in a novel therapeutic strategy for repairing articular cartilage defects.Research HighlightsAn in situ forming and injectable thiolated chitosan and carboxymethyl cellulose hydrogel was fabricated for cartilage tissue engineering.TCS/CMC displays suitable gelation time with high swelling ratio, tunable mechanical properties and highly porous.TGF-β1-loaded-TCS/CMC hydrogels showed maximum drug release activity.TGF-β1-loaded-TCS/CMC hydrogels had good biocompatibility to articular chondrocytes.An injectable TCS/CMC/TGF-β1 hydrogel is a promising material system for cartilage tissue engineering.

Facile design of lidocaine-loaded polymeric hydrogel to persuade effects of local anesthesia drug delivery system: complete in vitro and in vivo toxicity analyses

The principal goal of the present investigation was to enterprise new and effective drug delivery vesicle for the sustained delivery of local anesthetic lidocaine hydrochloride (LDC), using a novel combination of copolymeric hydrogel with tetrahydroxyborate (COP–THB) to improve bioactivity and therapeutic potential. To support this contention, the physical and mechanical properties, rheological characteristics, and component release of candidate formulations were investigated. An optimized formulation of COP–THB containing LDC to an upper maximum concentration of 1.5% w/w was assessed for drug crystallization. The biocompatibility of the prepared COP–THB hydrogel was exhibited strong cell survival (96%) and growth compatibility on L929 fibroblast cell lines, which was confirmed by using methods of MTT assay and microscopic observations. The COP–THB hydrogel release pattern is distinct from that of COP–THB/LDC hydrogels by the slow-release rate and the low percentage of cumulative release. In vivo evaluations were demonstrated the anesthetic effects and toxicity value of treated samples by using mice models. In addition, COP–THB/LDC hydrogels significantly inhibit in vivo tumor growth in mice model and effectively reduced it is in vivo toxicity. The pharmacological evaluation showed that encapsulation of LDC in COP–THB hydrogels prolonged its anesthetic action with favorable in vitro and in vivo compatibility. This novel design may theoretically be used in promising studies involving the controlled release of local anesthetics.

Highlights

Development a modified sustained release system for the local anesthetic lidocaine.

PVP-THB hydrogel to improve the pharmacological properties of the drug and their anesthetic activities.

Profiles of PVP-THB/LDC showed that the effective release of associated lidocaine.

This new formulation could potentially be used in future local anesthetics.

Quaternary ammonium silane-reinforced agar/polyacrylamide composites for packaging applications

Agar/polyacrylamide/quaternary ammonium silane-based (A/P/QAS-based) composite films were developed for food and biomedical packaging applications. The structural, optical, and surface morphological properties of the A/P and A/P/QAS composites were characterized by various characterization techniques in terms of thermogravimetric analysis, differential scanning calorimetry analyses, mechanical and rheological properties. Results showed that the 5% gravimetric loss (57.8-139.1 °C), glass transition temperature (179-189.9 °C) and tensile strength (35.2-47.8 MPa) of the prepared composites increased with increasing polyacrylamide content. The contact angle and water barrier properties of the composites were considerably improved by the addition of QAS. To compare WVP values of the A/P/QAS composite with neat AP composite films it reduced nearly 46% (2.45 to 1.32 × 10^-9 g/m² Pas). The A/P/QAS composites showed excellent antimicrobial properties against five different organisms. The Staphylococcus aureus exhibited highest 25 mm for gel and 18.1 mm for film of A/P/QAS composites. All the composites exhibited shear-thinning behavior, and their viscosity increased with increasing polyacrylamide content. The storage moduli of the prepared hydrogel composites were in the range of 5000-10,600 Pa at 1 rad/s and increased continuously over the entire frequency range. The dynamic rheological properties of A/P and A/P/QAS composites indicated that the prepared composites had good mechanical strength. Biopolymer based A/P and A/P/QAS composite films are suitable for green composite packaging applications.