Synthesis and characterization of ethyl cellulose micro/nanocapsules using solvent evaporation method

Current Challenges in Microcapsule Designs and Microencapsulation Processes: A Review

Microencapsulation is an advanced methodology for the protection, preservation, and/or delivery of active materials in a wide range of industrial sectors, such as pharmaceuticals, cosmetics, fragrances, paints, coatings, detergents, food products, and agrochemicals. Polymeric materials have been extensively used as microcapsule shells to provide appropriate barrier properties to achieve controlled release of the encapsulated active ingredient. However, significant limitations are associated with such capsules, including undesired leaching and the nonbiodegradable nature of the typically used polymers. In addition, the energy cost of manufacturing microcapsules is an important factor to be considered when designing microcapsule systems and the corresponding production processes. Recent factors linked to UN sustainability goals are modifying how such microencapsulation systems should be designed in pursuit of "ideal" microcapsules that are efficient, safe, cost-effective and environmentally friendly. This review provides an overview of advances in microencapsulation, with emphasis on sustainable microcapsule designs. The key evaluation techniques to assess the biodegradability of microcapsules, in compliance with recently evolving European Union requirements, are also described. Moreover, the most common methodologies for the fabrication of microcapsules are presented within the framework of their energy demand. Recent promising microcapsule designs are also highlighted for their suitability toward meeting current design requirements and stringent regulations, tackling the ongoing challenges, limitations, and opportunities.

Further Improvement Based on Traditional Nanocapsule Preparation Methods: A Review

Nanocapsule preparation technology, as an emerging technology with great development prospects, has uniqueness and superiority in various industries. In this paper, the preparation technology of nanocapsules was systematically divided into three categories: physical methods, chemical methods, and physicochemical methods. The technological innovation of different methods in recent years was reviewed, and the mechanisms of nanocapsules prepared via emulsion polymerization, interface polymerization, layer-by-layer self-assembly technology, nanoprecipitation, supercritical fluid, and nano spray drying was summarized in detail. Different from previous reviews, the renewal iteration of core-shell structural materials was highlighted, and relevant illustrations of their representative and latest research results were reviewed. With the continuous progress of nanocapsule technology, especially the continuous development of new wall materials and catalysts, new preparation technology, and new production equipment, nanocapsule technology will be used more widely in medicine, food, cosmetics, pesticides, petroleum products, and many other fields.

Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting

Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.

Preparation of Melamine/Rice Husk Powder Coated Shellac Microcapsules and Effect of Different Rice Husk Powder Content in Wall Material on Properties of Wood Waterborne Primer

The melamine/rice husk powder-coated shellac microcapsules were prepared by in-situ polymerization with melamine resin mixed with rice husk powder as microcapsule wall material and shellac as microcapsule core material. The effect of the addition amount of microcapsules with different wall material ratios on the performance of wood waterborne primer coating was investigated. The results show that the most important factor affecting the performance of microcapsules is the content of rice husk powder. Through the preparation and analysis of shellac microcapsule primer coating coated with melamine/rice husk powder, when the content of microcapsule powder is 0-6%, it has little effect on the optical properties of wood waterborne primer coating, and the microcapsule with 5.5% rice husk powder has little effect on the color difference of primer coating. The coating hardness increases with the increase of rice husk powder content in wall material. When the rice husk powder content in wall material is more than 5.5%, the coating hardness reaches the best. When the content of microcapsule powder is 3.0-9.0%, the adhesion of the coating is better, and the coating with rice husk powder content of 5.5% in microcapsule wall material has better impact resistance. When the content of rice husk powder was 5.5% and the content of microcapsule powder was 6%, the elongation at break of the primer coating was the highest and the tensile resistance was the best. The composition of wood waterborne primer did not change after adding microcapsule. The water-based primer with microcapsule has better aging resistance. The water-based primer coating with rice husk powder content of 5.5% and the addition amount of 6% had the best comprehensive performance, which lays the technical reference for the toughness and self-repairing of the waterborne wood coatings.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Encapsulation of fluazinam to extend efficacy duration in controlling Botrytis cinerea on cucumber

BACKGROUND

Fluazinam is an effective fungicide in controlling gray mold, but has short duration of efficacy. Increasing application dosage may cause phytotoxicity. To overcome this shortage, a controlled-release technology was studied by encapsulating fluazinam. Ethyl cellulose polymer microcapsules were loaded with fluazinam to formulate a fluazinam capsule suspension (FCS). The efficacy for inhibition of B. cinerea and persistency of the FCS were examined by comparing with fluazinam technical concentrate (FTC) and aqueous fluazinam suspension concentrate (FSC) using microscopic observation and high-performance liquid chromatography analysis.

RESULTS

FCS formed capsules, with median size of 3.17 μm in diameter, had 82.3% encapsulation efficiency. It had a stronger inhibitory activity against B. cinerea than FTC and FSC measured 7 days after the treatments. The half-life of FCS on cucumber leaves was 3.4 days, longer than the 2.3 days of FSC.

CONCLUSION

FCS formulation significantly improved the inhibition of B. cinerea and resulted in prolonged and sustained release. Moreover, microencapsulation increased the duration of the efficacy of fluazinam on target crops. This formulation could help to sustain pesticides and protect the environment. © 2021 Society of Chemical Industry.

Synthesis and Spectrophotometric Analysis of Microcapsules Containing Immortelle Essential Oil

In this study, microcapsules were prepared by solvent evaporation technique using ethyl cellulose component as wall and essential oil as core material. The synthesis of microcapsules was carried out using different oil masses. The analysis of the microcapsules was carried out using field emission scanning electron microscope (FE-SEM) and UV spectrophotometric analysis using absorption spectrophotometer. The obtained results confirm the regular spherical shape and size of the synthesized microcapsules. The qualitative and quantitative spectrophotometric analysis of the microencapsulated immortelle oil was measured at the wavelength of 265 nm. The calibration diagram was used to calculate the unknown concentrations of the microencapsulated oil. The obtained results confirm the application of the presented method as relevant for the possible determination of microencapsulated oil on textile materials.

α-Gluco-oligosaccharide in the research and development of a polymeric material for modified drug delivery

This research aimed to analyse the influence of the incorporation of α-gluco-oligosaccharide (GOS-α) in the formation of isolated films of different combinations of polymethyl by applying physicochemical analyses such as Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetry (TG) and scanning electron microscopy (SEM). Polymer films were prepared by evaporation associating Eudragit® RS30D with α-GOS. FTIR results confirmed the incorporation of α-GOS. The intermolecular interaction involving carbonyl and hydroxyl groups of Eudragit® with α-GOS was not detected. By TG and DSC, it was possible to detect that there were no changes in the thermal properties between the proposed combinations and the standard film. Upon SEM analysis, the appearance of pores for the association 90:10 was evidenced. Possibly, these pores act as output ports for the drug. These results sharpen the perspective of applying this material to the coating of pharmaceutical formulations of modified drug delivery.

Multifunctional fabric coatings with slow-releasing fragrance and UV resistant properties from ethyl cellulose/silica hybrid microcapsules

The synthesis of multifunctional microcapsules using natural polymers has contributed to a broad range of practical applications on fabric coatings. This paper presents a facile and environment-friendly approach for waterborne multifunctional fabric coatings by using cellulose/silica hybrid microcapsules. In this method, lavender fragrance oil-loaded cellulose/silica hybrid microcapsules were one-step synthesized via emulsion solvent diffusion. This microcapsule is core-shell structure with UV absorbers and methacrylic acid grafted silica in the shell and then added into the waterborne polysiloxane resins to form multifunctional fabric coatings. The as-obtained fabric coatings not only exhibited controlled lavender fragrance oil-releasing performance, and it can keep above 30 % fragrance after ninety days due to the slow releasing of lavender fragrance oil in the capsules, but also showed excellent UV resistant property with 159 UPF value.