Genotypic and heat stress effects on leaf cuticles of field pea using ATR-FTIR spectroscopy

GRAIN SIZE ON CHROMOSOME 2 orchestrates phytohormone, sugar signaling and energy metabolism to confer thermal resistance in rice

GRAIN SIZE ON CHROMOSOME 2 (GS2) has been reported to enhance rice grain yield and confer tolerance to cold, drought, and salt stress, but its function in heat tolerance of rice remains undocumented. This study aimed to investigate whether GS2 could enhance thermal tolerance by subjecting rice seedlings of Huazhan (HZ) and its near-isogenic line (HZ-GS2) to heat stress. HZ-GS2 plants exhibited less damage compared to HZ plants under heat stress. Transcriptome revealed the involvement of phytohormones, sugar signaling, and energy metabolism in the mechanism by which GS2 influences heat tolerance. Under heat stress, HZ-GS2 plants showed higher increases or lower decreases in glucose, gibberellins (GAs), salicylic acid (SA), indoleacetic acid (IAA), adenosine triphosphate (ATP), energy charge, as well as the activities of hexokinase, NADH dehydrogenase, cytochrome oxidase, ATP synthase, and ATPase. Exogenous GA3 enhanced heat tolerance in rice by increasing energy charge, ATPase, activities of complex V and hexokinase. Additionally, glucose, sucrose, 3-aminobenzamide (3-ab), and Na2SO3 conferred heat tolerance in rice plants. Importantly, a significant increase in Fv/Fm was observed in plants treated with a combination of GA3, glucose, and 3-ab, compared to those sprayed alone. Thus, GS2 coordinates GA3, hexokinase, and energy metabolism to improve energy status, thereby enhancing heat tolerance in rice plants.

Application of ATR-FTIR Spectroscopy for Analysis of Salt Stress in Brussels Sprouts

Salt stress is one of the environmental stresses that significantly reduces crop productivity and quality worldwide. Methods to overcome salt stress include developing salt-resistant crops by inserting various resistance genes or to diagnosing and responding to the effects of salt stress at an early stage. In this study, we investigate the effects of salinity stress on growth, photosynthetic efficiency, and metabolic changes in Brussels sprouts (Brassica oleracea var. gemmifera). Fresh weight and leaf area decreased significantly with increasing NaCl concentration, indicating that salinity stress has a detrimental effect on plant growth. However, chlorophyll fluorescence parameters did not show significant changes, suggesting that photosynthetic efficiency was not significantly affected over 10 days. Fourier transform infrared (FTIR) spectroscopy revealed notable metabolic adjustments, especially in lipids, plastids, proteins, and carbohydrates, indicating biosynthesis of protective compounds such as anthocyanins and proline in response to salinity stress. Pearson correlation analysis confirmed a strong relationship between NaCl concentration and the observed physiological and metabolic changes. The findings highlight the potential of FTIR spectroscopy as a non-destructive tool for early detection of salinity stress and timely intervention to improve crop resilience and yield. This study highlights the widespread application of FTIR spectroscopy in agricultural research to manage abiotic stresses in crops.

A high-performance watermelon skin ion-solvating membrane for electrochemical CO2 reduction

Ion-solvating membranes have been gaining increasing attention as core components of electrochemical energy conversion and storage devices. However, the development of ion-solvating membranes with low ion resistance and high ion selectivity still poses challenges. In order to propose an effective strategy for high-performance ion-solvating membranes, this study conducted a comprehensive investigation on watermelon skin membranes through a combination of experimental research and molecular dynamics simulation. The micropores and continuous hydrogen-bonding networks constructed by the synergistic effect of cellulose fiber and pectin enable the hypodermis of watermelon skin membranes to have a high ion conductivity of 282.3 mS cm-1 (room temperature, saturated with 1 M KOH). The negatively charged groups and hydroxyl groups on the microporous channels increase the formate penetration resistance of watermelon skin membranes in contrast to commercially available membranes, and this is crucial for CO2 electroreduction. Therefore, the confinement of proton donors and negatively charged groups within three-dimensional microporous polymers gives inspiration for the design of high-performance ion-solvating membranes.

Spectroscopic Analyses Highlight Plant Biostimulant Effects of Baker's Yeast Vinasse and Selenium on Cabbage through Foliar Fertilization

The main aim of this study is to find relevant analytic fingerprints for plants' structural characterization using spectroscopic techniques and thermogravimetric analyses (TGAs) as alternative methods, particularized on cabbage treated with selenium-baker's yeast vinasse formulation (Se-VF) included in a foliar fertilizer formula. The hypothesis investigated is that Se-VF will induce significant structural changes compared with the control, analytically confirming the biofortification of selenium-enriched cabbage as a nutritive vegetable, and particularly the plant biostimulant effects of the applied Se-VF formulation on cabbage grown in the field. The TGA evidenced a structural transformation of the molecular building blocks in the treated cabbage leaves. The ash residues increased after treatment, suggesting increased mineral accumulation in leaves. X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) evidenced a pectin-Iα-cellulose structure of cabbage that correlated with each other in terms of leaf crystallinity. FTIR analysis suggested the accumulation of unesterified pectin and possibly (seleno) glucosinolates and an increased network of hydrogen bonds. The treatment with Se-VF formulation induced a significant increase in the soluble fibers of the inner leaves, accompanied by a decrease in the insoluble fibers. The ratio of soluble/insoluble fibers correlated with the crystallinity determined by XRD and with the FTIR data. The employed analytic techniques can find practical applications as fast methods in studies of the effects of new agrotechnical practices, while in our particular case study, they revealed effects specific to plant biostimulants of the Se-VF formulation treatment: enhanced mineral utilization and improved quality traits.

Use of ATR-FTIR spectroscopy for analysis of water deficit tolerance in Physalis peruviana L

Treatments that allow plants to better tolerate water deficit become essential, such as the application of chemical priming. In addition, it is essential to use analyses capable of measuring these effects at the biomolecular level, complementing the other physiological evaluations. In view of the above, this study aimed to evaluate the use of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy for analyses of water deficit tolerance in Physalis peruviana plants. For this, samples of leaves, stems and roots of plants subjected to different pretreatments with proline (10 mM and 20 mM), sodium nitroprusside (SNP 25 μM and 50 μM) and H₂O as control, aiming at increasing tolerance to water deficit, were evaluated. The chemical agents used attenuated water deficit in P. peruviana plants, influencing phenotypic characterization and spectral analyses. Analysis of FTIR spectra indicates that different functional groups present in leaves, stems and roots were influenced by water deficit and priming treatments. Changes in lipid levels contributed to reducing water losses by increasing the thickness of cuticular wax. Accumulation of proteins and carbohydrates promoted osmoregulation and maintenance of the water status of plants. Thus, water deficit causes changes in the functional groups present in the organs of P. peruviana, and the ATR-FTIR technique is able to detect these biomolecular changes, helping in the selection of priming treatments to increase tolerance to water deficit.

Effects of Pea (Pisum sativum L.) Cultivars for Mixed Cropping with Oats (Avena sativa L.) on Yield and Competition Indices in an Organic Production System

The benefits of cereal-legume mixed cropping is a sustainable agricultural practice. However, knowledge of the genotypic differences of semi-leafless pea varieties is not enough to help them compete with cereals. In this study, the effects of Lithuania's newest Pisum sativum cultivars ('Egle DS' and 'Lina DS') and, for comparison, a control cultivar ('Jūra DS') established with Avena sativa in mixed cropping system were investigated. Three years of field trials (2018, 2019 and 2020) with four experiments involved three different mixtures of each field pea cultivar with oat. The aboveground biomass of mixed cropped new field pea cultivars was found to be significantly higher: biomass of cultivars 'Egle DS' increased by 17.0% and 'Lina DS' by 7.2% on average compared with the control cultivar 'Jūra DS'. For the mixed cropping system, statistically greater total aboveground biomass was observed with plant ratios of 50% pea + 50% oat and 60% pea + 40% oat compared to peas monocultures. Mixed cropped oat was the dominant species in all tested mixture compositions; however, the highest total grain yield of mixed crops was obtained when new pea 'Lina DS' and 'Egle DS' cultivars were included in the mixtures compared with the control cultivar. The new pea cultivar 'Egle DS' had a greater effect on protein content compared to other tested pea cultivars. In the new pea cultivars 'Lina DS' and 'Egle DS', the higher photosynthetic capacity and aboveground biomass of mixed cropped pea with oat showed mixture effects in the mixed cropped system and could increase total yield compared with pea monoculture. Generally, the new pea cultivars displayed a greater Land Equivalent Ratio (LER) value, resulting in the greatest yield among the mixtures on average for all three years and all four experiments. Future research could optimize the effects of pea cultivar mixtures with cereals to further improve the yield of organic mixed cropping systems.

Large-Scale Heat-Tolerance Screening and Genetic Diversity of Pea (Pisum sativum L.) Germplasms

Pea (Pisum sativum L.) is an important legume crop. However, the yield of pea is adversely affected by heat stress in China. In this study, heat-tolerant germplasms were screened and evaluated in the field under multi-conditions. The results showed that heat stress could significantly affect pea yield. On the basis of grain weight per plant, 257 heat-tolerant and 175 heat-sensitive accessions were obtained from the first year’s screening, and 26 extremely heat-tolerant and 19 extremely heat-sensitive accessions were finally obtained in this study. Based on SNaPshot technology, two sets of SNP markers, including 46 neutral and 20 heat-tolerance-related markers, were used to evaluate the genetic diversity and population genetic structure of the 432 pea accessions obtained from the first year’s screening. Genetic diversity analysis showed that the average polymorphic information content was lower using heat-tolerance-related markers than neutral markers because of the selective pressure under heat stress. In addition, population genetic structure analysis showed that neutral markers divided the 432 pea accessions into two subpopulations associated with sowing date type and geographical origin, while the heat-tolerance-related markers divided these germplasms into two subpopulations associated with heat tolerance and sowing date type. Overall, we present a comprehensive resource of heat-tolerant and heat-sensitive pea accessions through heat-tolerance screenings in multi-conditions, which could help genetic improvements of pea in the future.

Glutathione and copper ions as critical factors of green plant regeneration efficiency of triticale in vitro anther culture

Plant tissue culture techniques are handy tools for obtaining unique plant materials that are difficult to propagate or important for agriculture. Homozygous materials derived through in vitro cultures are invaluable and significantly accelerate the evaluation of new varieties, e.g., cereals. The induction of somatic embryogenesis/androgenesis and the regeneration and its efficiency can be influenced by the external conditions of tissue culture, such as the ingredients present in the induction or regeneration media. We have developed an approach based on biological system, molecular markers, Fourier Transform Infrared spectroscopy, and structural equation modeling technique to establish links between changes in sequence and DNA methylation at specific symmetric (CG, CHG) and asymmetric (CHH) sequences, glutathione, and green plant regeneration efficiency in the presence of variable supplementation of induction medium with copper ions. The methylation-sensitive Amplified Fragment Length Polymorphism was used to assess tissue culture-induced variation, Fourier Transform Infrared spectroscopy to describe the glutathione spectrum, and a structural equation model to develop the relationship between sequence variation, de novo DNA methylation within asymmetric sequence contexts, and copper ions in the induction medium, as well as, glutathione, and green plant efficiency. An essential aspect of the study is demonstrating the contribution of glutathione to green plant regeneration efficiency and indicating the critical role of copper ions in influencing tissue culture-induced variation, glutathione, and obtaining green regenerants. The model presented here also has practical implications, showing that manipulating the concentration of copper ions in the induction medium may influence cell function and increases green plant regeneration efficiency.

CsIVP Modulates Low Nitrogen and High-Temperature Resistance in Cucumber

Crop plants experience various abiotic stresses that reduce yield and quality. Although several adaptative physiological and defense responses to single stress have been identified, the behavior and mechanisms of plant response to multiple stresses remain underexamined. Herein, we determined that the leaf and vascular changes in Cucumis sativus Irregular Vasculature Patterning (CsIVP)-RNAi cucumber plants can enhance resistance to nitrogen deficiency and high-temperature stress. CsIVP negatively regulated high nitrate affinity transporters (NRT2.1, NRT2.5) and reallocation transporters (NRT1.7, NRT1.9, NRT1.12) under low nitrogen stress. Furthermore, CsIVP-RNAi plants have high survival rate with low heat injury level under high-temperature condition. Several key high-temperature regulators, including Hsfs, Hsps, DREB2C, MBF1b and WRKY33 have significant expression in CsIVP-RNAi plants. CsIVP negatively mediated high-temperature responses by physically interacting with CsDREB2C. Altogether, these results indicated that CsIVP integrates innate programming of plant development, nutrient transport and high-temperature resistance, providing a potentially valuable target for breeding nutrient-efficient and heat-resistant crops.

TT2 controls rice thermotolerance through SCT1-dependent alteration of wax biosynthesis

Global warming threatens crop production. G proteins mediate plant responses to multiple abiotic stresses. Here we identified a natural quantitative trait locus, TT2 (THEROMOTOLERANCE 2), encoding a Gγ subunit, that confers thermotolerance in rice during both vegetative and reproductive growth without a yield penalty. A natural allele with loss of TT2 function was associated with greater retention of wax at high temperatures and increased thermotolerance. Mechanistically, we found that a transcription factor, SCT1 (Sensing Ca²⁺ Transcription factor 1), functions to decode Ca²⁺ through Ca²⁺-enhanced interaction with calmodulin and acts as a negative regulator of its target genes (for example, Wax Synthesis Regulatory 2 (OsWR2)). The calmodulin-SCT1 interaction was attenuated by reduced heat-triggered Ca²⁺ caused by disrupted TT2, thus explaining the observed heat-induced changes in wax content. Beyond establishing a bridge linking G protein, Ca²⁺ sensing and wax metabolism, our study illustrates innovative approaches for developing potentially yield-penalty-free thermotolerant crop varieties.

Hop Leaves as an Alternative Source of Health-Active Compounds: Effect of Genotype and Drying Conditions

In hop cultivation, one-third of the crop is a valuable product (hop cones), and two-thirds is unexploited biomass, consisting mainly of leaves and stems, which, in a circular economy approach, can be recovered and, once stabilized, supplied to industrial sectors, such as cosmetics, pharmaceuticals and phytotherapy, with high added value. In this regard, this study aimed to investigate the effects of two different drying methods: oven drying (OD) at 45 °C and freeze-drying (FD), on the overall nutraceutical profile (i.e., total phenols, total flavans and total thiols), pigment content (i.e., carotenoids and chlorophylls) and the antioxidant potential of leaves from five different Humulus lupulus varieties grown in central Italy. Moreover, attenuated total reflectance infrared (ATR-FTIR) spectroscopy was applied to dried leaf powders to study the influence of both the variety and treatment on their molecular fingerprints. The spectral data were then analyzed by principal component analysis (PCA), which was able to group the samples mainly based on the applied treatment. Considering the overall phytochemical profile, FD appeared to be the most suitable drying method, while OD provided higher carotenoid retention, depending on the genotype considered. Finally, unsupervised chemometric tools (i.e., PCA and hierarchical clustering) revealed that the two main clusters contained subclusters based on the drying treatment applied; these subgroups were related to the susceptibility of the variety to the drying conditions studied.

Tissue specific changes in elements and organic compounds of alfalfa (Medicago sativa L.) cultivars differing in salt tolerance under salt stress

Soil salinity is a global concern and often the primary factor contributing to land degradation, limiting crop growth and production. Alfalfa (Medicago sativa L.) is a low input high value forage legume with a wide adaptation. Examining the tissue-specific responses to salt stress will be important to understanding physiological changes of alfalfa. The responses of two alfalfa cultivars (salt tolerant 'Halo', salt intolerant 'Vernal') were studied for 12 weeks in five gradients of salt stress in a sand based hydroponic system in the greenhouse. The accumulation and localization of elements and organic compounds in different tissues of alfalfa under salt stress were evaluated using synchrotron beamlines. The pattern of chlorine accumulation for 'Halo' was: root > stem ~ leaf at 8 dSm^-1, and root ~ leaf > stem at 12 dSm^-1, potentially preventing toxic ion accumulation in leaf tissues. In contrast, for 'Vernal', it was leaf > stem ~ root at 8 dSm^-1 and leaf > root ~ stem at 12 dSm^-1. The distribution of chlorine in 'Halo' was relatively uniform in the leaf surface and vascular bundles of the stem. Amide concentration in the leaf and stem tissues was greater for 'Halo' than 'Vernal' at all salt gradients. This study determined that low ion accumulation in the shoot was a common strategy in salt tolerant alfalfa up to 8 dSm^-1 of salt stress, which was then replaced by shoot tissue tolerance at 12 dSm^-1.

Nitrogen influenced biomolecular changes on Physalis L. species studied using 2DCOS spectral analysis coupled with chemometric and Receiver operation characteristics analysis

The determination of the molecular composition of plant leaves is essential to assist in nutritional management, whether for cultivated or non-cultivated species. In this sense, the study aimed to apply FTIR technique in combination with chemometrics and ROC analysis for the evaluation of changes in compositional of plant leaves of Physalis angulata and Physalis peruviana due to nitrogen fertilization treatments. Both species were grown under different doses of nitrogen (0, 200, 400, and 600 Kg ha^-1) and leaf samples were evaluated using ATR-FTIR. Our results demonstrate that the spectra of both species were influenced by the nitrogen doses. The computed band area from the lipid/amide, lipid/carbohydrates, degree of esterification and calcium oxalate shows nitrogen fertilization due to 400 Kg ha^-1 of N treatment is more effective for a better quality of yield. 2D correlation spectral analysis (2DCOS) reveals cellulose and pectin begins changes followed by amide of proteins due to nitrogen treatment in P. peruviana samples. The P. angulata plants shows hemicellulose changes predominating followed by proteins and polysaccharides. The obtained principle component analysis plot and loading values show the Physalis species samples distinctly separated from control with protein and carbohydrates are predominant in influencing separation among them. Receiver operation characteristic analysis shows a higher value of area under the curve reflecting better reliability of the experiments carried out. Hierarchical cluster analysis shows closed separation for a similar group on dissimilarity scale. Thus the use of 2DCOS coupled with chemometrics helps to identify changes in the composition of leaves of physalis species due to nitrogen doses, constituting a fast and precise measuring for the suitable management of this fertilization.

Untangling the Influence of Heat Stress on Crop Phenology, Seed Set, Seed Weight, and Germination in Field Pea (Pisum sativum L.)

The apparent climatic extremes affect the growth and developmental process of cool-season grain legumes, especially the high-temperature stress. The present study aimed to investigate the impacts of high-temperature stress on crop phenology, seed set, and seed quality parameters, which are still uncertain in tropical environments. Therefore, a panel of 150 field pea genotypes, grouped as early (n = 88) and late (n = 62) maturing, were exposed to high-temperature environments following staggered sowing [normal sowing time or non-heat stress environment (NHSE); moderately late sowing (15 days after normal sowing) or heat stress environment-I (HSE-I); and very-late sowing (30 days after normal sowing) or HSE-II]. The average maximum temperature during flowering was about 22.5 ± 0.17°C for NHSE and increased to 25.9 ± 0.11°C and 30.6 ± 0.19°C in HSE-I and HSE-II, respectively. The average maximum temperature during the reproductive period (RP) (flowering to maturity) was in the order HSE-II (33.3 ± 0.03°C) > HSE-I (30.5 ± 0.10°C) > NHSE (27.3 ± 0.10°C). The high-temperature stress reduced the seed yield (24-60%) and seed germination (4-8%) with a prominent effect on long-duration genotypes. The maximum reduction in seed germination (>15%) was observed in HSE-II for genotypes with >115 days maturity duration, which was primarily attributed to higher ambient maximum temperature during the RP. Under HSEs, the reduction in the RP in early- and late-maturing genotypes was 13-23 and 18-33%, suggesting forced maturity for long-duration genotypes under late-sown conditions. The cumulative growing degree days at different crop stages had significant associations (p < 0.001) with seed germination in both early- and late-maturing genotypes; and the results further demonstrate that an extended vegetative period could enhance the 100-seed weight and seed germination. Reduction in seed set (7-14%) and 100-seed weight (6-16%) was observed under HSEs, particularly in HSE-II. The positive associations of 100-seed weight were observed with seed germination and germination rate in the late-maturing genotypes, whereas in early-maturing genotypes, a negative association was observed for 100-seed weight and germination rate. The GGE biplot analysis identified IPFD 11-5, Pant P-72, P-1544-1, and HUDP 11 as superior genotypes, as they possess an ability to produce more viable seeds under heat stress conditions. Such genotypes will be useful in developing field pea varieties for quality seed production under the high-temperature environments.

Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release

The prevention of bacteria-induced infections has been increasing in importance in both clinical surgery and biomedical engineering. Although great attention has been paid to designing intelligent antibacterial surfaces, the fabrication processes are still not facile and universal enough, and the antibacterial efficiencies of these surfaces are also not ideal. Herein, ionic liquid (IL) molecules of 3-(12-mercaptododecyl)-1-methyl-1H-imidazol-3-ium bromide (IL(Br)) were synthesized with the minimum inhibitory concentrations as low as 4 and 8 μg mL-1 against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. By simply immersing a polymeric substrate into the IL(Br) solution, an antibacterial surface with high killing efficiency of 99% against S. aureus (94% against E. coli) was achieved via a mussel-inspired approach. Subsequently, 97% S. aureus and 95% E. coli on the substrate could be released by simple ion-exchange of Br- with (CF3SO2)2N- due to the ion sensitivity of the IL molecular brushes. Thus, the proposed facile strategy towards a superior efficiency surface could be potentially used in intelligent antibacterial fields.

Probing the Molecular Structure and Orientation of the Leaf Surface of Brassica oleracea L. by Polarization Modulation-Infrared Reflection-Absorption Spectroscopy

The surface of most aerial plant organs is covered with the cuticle, a membrane consisting of a variety of organic compounds, including waxes, cutin (a polyester) and polysaccharides. The cuticle serves as the multifunctional interface between the plant and the environment, and plays a major role in protecting plants against various environmental stress factors. Characterization of the molecular arrangements in the intact cuticle is critical for the fundamental understanding of its physicochemical properties; however, this analysis remains technically challenging. Here, we describe the nondestructive characterization of the intact cuticle of Brassica oleracea L. leaves using polarization modulation-infrared (IR) reflection-absorption spectroscopy (PM-IRRAS). PM-IRRAS has a probing depth of less than several hundreds of nanometers, and reveals the crystalline structure of the wax covering the cuticle surface (epicuticular wax) and the nonhydrogen-bonding character of cutin. Combined analysis using attenuated total reflection-IR spectra suggested that hemicelluloses xylan and xyloglucan are present in the outer cuticle region close to the epicuticular wax, whereas pectins are dominant in the inner cuticle region (depth of ≤2 μm). PM-IRRAS can also determine the average orientation of the cuticular molecules, as indicated by the positive and negative spectral peaks. This unique advantage reveals the orientational order in the intact cuticle; the hydrocarbon chains of the epicuticular wax and cutin and the backbones of hemicelluloses are oriented perpendicular to the leaf surface. PM-IRRAS is a versatile, informative and easy-to-use technique for studying plant cuticles because it is nondestructive and does not require sample pretreatment and background measurements.