The evolution of relative trait size and shape: insights from the genitalia of dung beetles

Sexually transmitted mutualist nematodes shape host growth across dung beetle species

Many symbionts are sexually transmitted and impact their host's development, ecology, and evolution. While the significance of symbionts that cause sexually transmitted diseases (STDs) is relatively well understood, the prevalence and potential significance of the sexual transmission of mutualists remain elusive. Here, we study the effects of sexually transmitted mutualist nematodes on their dung beetle hosts. Symbiotic Diplogastrellus monhysteroides nematodes are present on the genitalia of male and female Onthophagus beetles and are horizontally transmitted during mating and vertically passed on to offspring during oviposition. A previous study indicates that the presence of nematodes benefits larval development and life history in a single host species, Onthophagus taurus. However, Diplogastrellus nematodes can be found in association with a variety of beetle species. Here, we replicate these previous experiments, assess whether the beneficial effects extend to other host species, and test whether nematode-mediated effects differ between male and female host beetles. Rearing three relatively distantly related dung beetle species with and without nematodes, we find that the presence of nematodes benefits body size, but not development time or survival across all three species. Likewise, we found no difference in the benefit of nematodes to male compared to female beetles. These findings highlight the role of sexually transmitted mutualists in the evolution and ecology of dung beetles.

Got milkweed? Genetic assimilation as potential source for the evolution of nonmigratory monarch butterfly wing shape

Monarch butterflies (Danaus plexippus) are well studied for their annual long-distance migration from as far north as Canada to their overwintering grounds in Central Mexico. At the end of the cold season, monarchs start to repopulate North America through short-distance migration over the course of multiple generations. Interestingly, some populations in various tropical and subtropical islands do not migrate and exhibit heritable differences in wing shape and size, most likely an adaptation to island life. Less is known about forewing differences between long- and short-distance migrants in relation to island populations. Given their different migratory behaviors, we hypothesized that these differences would be reflected in wing morphology. To test this, we analyzed forewing shape and size of three different groups: nonmigratory, lesser migratory (migrate short-distances), and migratory (migrate long-distances) individuals. Significant differences in shape appear in all groups using geometric morphometrics. As variation found between migratory and lesser migrants has been shown to be caused by phenotypic plasticity, and lesser migrants develop intermediate forewing shapes between migratory and nonmigratory individuals, we suggest that genetic assimilation might be an important mechanism to explain the heritable variation found between migratory and nonmigratory populations. Additionally, our research confirms previous studies which show that forewing size is significantly smaller in nonmigratory populations when compared to both migratory phenotypes. Finally, we found sexual dimorphism in forewing shape in all three groups, but for size in nonmigratory populations only. This might have been caused by reduced constraints on forewing size in nonmigratory populations.

Variations in genetic structure and male genitalia suggest recent lineage diversification in the Neotropical dung beetle complex Canthon cyanellus (Scarabaeidae: Scarabaeinae)

We analysed the genetic divergence and morphology of the aedeagus (i.e. phallobase and parameres) in Canthon cyanellus at different geographical levels. The results from both approaches were compared with the current taxonomic assignment of the C. cyanellus complex, which includes three subspecies. We found a high variation in all the morphological characters of the aedeagus in the populations analysed; the morphometric variation was not geographically structured, either by population or by region. The genealogical analysis indicates a significant genetic structure that does not match either the morphological variation in the male genitalia or the previous subspecific taxonomic classification. Our results suggest that the morphological variation of the aedeagus is seemingly not an isolating reproductive barrier and that the intra- and interpopulation morphological variability of the aedeagus in the C. cyanellus complex does not permit the division into several species. We suggest that other evolutionary forces, such as genetic drift and sexual selection, have influenced the evolution of the male genitalia and the incipient differentiation of this species complex.

Evolution and plasticity of morph-specific integration in the bull-headed dung beetle Onthophagus taurus

Developmental and evolutionary processes underlying phenotypic variation frequently target several traits simultaneously, thereby causing covariation, or integration, among phenotypes. While phenotypic integration can be neutral, correlational selection can drive adaptive covariation. Especially, the evolution and development of exaggerated secondary sexual traits may require the adjustment of other traits that support, compensate for, or otherwise function in a concerted manner. Although phenotypic integration is ubiquitous, the interplay between genetic, developmental, and ecological conditions in shaping integration and its evolution remains poorly understood. Here, we study the evolution and plasticity of trait integration in the bull-headed dung beetle Onthophagus taurus which is characterized by the polyphenic expression of horned ('major') and hornless ('minor') male morphs. By comparing populations subject to divergent intensities of mate competition, we tested whether mating system shifts affect integration of traits predicted to function in a morph-specific manner. We focussed on fore and hind tibia morphology as these appendages are used to stabilize major males during fights, and on wings, as they are thought to contribute to morph-based differences in dispersal behavior. We found phenotypic integration between fore and hind tibia length and horn length that was stronger in major males, suggesting phenotypic plasticity in integration and potentially secondary sexual trait compensation. Similarly, we observed that fore tibia shape was also integrated with relative horn length. However, although we found population differentiation in wing and tibia shape and allometry, populations did not differ in integration. Lastly, we detected little evidence for morph differences in integration in either tibia or wing shape, although wing allometries differed between morphs. This contrasts with previous studies documenting intraspecific differentiation in morphology, behavior, and allometry as a response to varying levels of mate competition across O. taurus populations. We discuss how sexual selection may shape morph-specific integration, compensation, and allometry across populations.

Dung beetle species introductions: when an ecosystem service provider transforms into an invasive species

Dung beetle introduction programmes were designed to accelerate exotic livestock dung degradation and to control dung breeding pestiferous flies and livestock parasites. The introduction programmes provided exotic dung beetle species with an opportunity to cross natural barriers and spread beyond their native range. There are no reports that explain what probable adaptation mechanisms enable particular dung beetle species to be the most successful invader. Here we identify the morphological, biological, physiological, ecological and behavioural attributes of the four most widespread and successful dung beetle species in introduced areas on a global scale in relation to the assumption that these species are different from other exotic and native dung beetles. We have recognised Digitonthophagus gazella (Fabricius), Onthophagus taurus (Schreber), Euoniticellus intermedius (Reiche) and Aphodius fimetarius (Linnaeus) as the most successful invaders based on their spread, predominance, distribution range and the reports of invasion. Each of these four species has different natural history traits that increase their fitness making them successful invaders. D. gazella has high fecundity and spreading ability, can instantly locate and colonise fresh and nutritious dung, and has a broad thermal window. O. taurus has morphological plasticity, high fecundity, high brood survival rate due to bi-parenting, and is adapted to extreme thermal and moisture conditions. E. intermedius has remnant-dung feeding abilities, a wide thermal window, functioning best at upper-temperature levels, and successful breeding and survival abilities at extremely low soil moisture conditions. A. fimetarius is small-sized, has high breeding and dispersal abilities, and is adapted to lower thermal and upper moisture extremes and variable soil conditions. Discussed here are perspectives on adaptive attributes of dung beetle species that are important to consider during their selection for redistributions. We have elaborated on the fitness and success characteristics of the four species individually. Further, we recommend a prior-introduction baseline monitoring of native dung beetle assemblages so as to evaluate the future impact of exotic dung beetle introductions on the recipient ecosystem.

Condition dependence of phenotypic integration and the evolvability of genitalic traits in a neriid fly

The spectacular diversity of insect male genitalia, and their relative insensitivity to the environment, have long puzzled evolutionary biologists and taxonomists. We asked whether the unusual evolvability of male genitalia could be associated with low morphological integration of genitalic traits, by comparison with male somatic traits and female traits. We also asked whether this pattern was robust to variation in resource availability during development, which affects adult condition. To address these questions, we manipulated larval diet quality in a split-brood design and compared levels of integration of male and female genitalic and somatic traits in the neriid fly, Telostylinus angusticollis. We found that male genitalic traits were substantially less integrated than male somatic traits, and less integrated than female genitalic traits. Female genitalic traits were also less integrated than female somatic traits, but the difference was less pronounced than in males. However, integration of male genitalic traits was negatively condition-dependent, with high-condition males exhibiting lower trait integration than low-condition males. Finally, genitalic traits exhibited lower larval diet × family interactions than somatic traits. These results could help explain the unusually high evolvability of male genitalic traits in insects.

Evolution of, and via, Developmental Plasticity: Insights through the Study of Scaling Relationships

Scaling relationships emerge from differential growth of body parts relative to each other. As such, scaling relationships are at least in part the product of developmental plasticity. While some of the developmental genetic mechanisms underlying scaling relationships are starting to be elucidated, how these mechanisms evolve and give rise to the enormous diversity of allometric scaling observed in nature is less understood. Furthermore, developmental plasticity has itself been proposed as a mechanism that facilitates adaptation and diversification, yet its role in the developmental evolution of scaling relationships remains largely unknown. In this review, we first explore how the mechanisms of scaling relationships have evolved. We primarily focus on insect development and review how pathway components and pathway interactions have evolved across taxa to regulate scaling relationships across diverse traits. We then discuss the potential role of developmental plasticity in the evolution of scaling relationships. Specifically, we address the potential role of allometric plasticity and cryptic genetic variation in allometry in facilitating divergence via genetic accommodation. Collectively, in this article, we aim to bring together two aspects of developmental plasticity: the mechanistic underpinnings of scaling relationships and their evolution, and the potential role that plasticity plays in the evolutionary diversification of scaling relationships.

Insulin signalling's role in mediating tissue-specific nutritional plasticity and robustness in the horn-polyphenic beetle Onthophagus taurus

Organisms cope with nutritional variation via developmental plasticity, adjusting trait size to nutrient availability for some traits while enabling others to develop in a nutritionally robust manner. Yet, the developmental mechanisms that regulate organ-specific growth across nutritional gradients remain poorly understood. We assessed the functions of members of the insulin/insulin-like signalling pathway (IIS) in the regulation of nutrition sensitivity and robustness in males of the horn-polyphenic beetle Onthophagus taurus, as well as potential regulatory interactions between IIS and two other growth-regulating pathways: Doublesex and Hedgehog signalling. Using RNA interference (RNAi), we experimentally knocked down both insulin receptors ( InR1 and InR2) and Foxo, a growth inhibitor. We then performed morphometric measurements on horns, a highly nutrition-sensitive trait, and genitalia, a largely nutrition-insensitive trait. Finally, we used quantitative real-time polymerase chain reaction to assess expression levels of doublesex and the Hedgehog signalling gene smoothened following IIS-RNAi. Our results suggest that nutrition responsiveness of both traits is regulated by different IIS components, which transduce nutritional conditions to both Doublesex and Hedgehog pathways, albeit via different IIS pathway members. Combined with previous studies, our findings suggest that separate origins of trait exaggeration among insect lineages were enabled through the independent co-option of IIS, yet via reliance on different components therein.

Alpha shapes: determining 3D shape complexity across morphologically diverse structures

Background

Following recent advances in bioimaging, high-resolution 3D models of biological structures are now generated rapidly and at low-cost. To use this data to address evolutionary and ecological questions, an array of tools has been developed to conduct shape analysis and quantify topographic complexity. Here we focus particularly on shape techniques applied to irregular-shaped objects lacking clear homologous landmarks, and propose a new ‘alpha-shapes’ method for quantifying 3D shape complexity.

Methods

We apply alpha-shapes to quantify shape complexity in the mammalian baculum as an example of a morphologically disparate structure. Micro- computed-tomography (μCT) scans of bacula were conducted. Bacula were binarised and converted into point clouds. Following application of a scaling factor to account for absolute size differences, a suite of alpha-shapes was fitted per specimen. An alpha shape is formed from a subcomplex of the Delaunay triangulation of a given set of points, and ranges in refinement from a very coarse mesh (approximating convex hulls) to a very fine fit. ‘Optimal’ alpha was defined as the refinement necessary in order for alpha-shape volume to equal CT voxel volume, and was taken as a metric of overall ‘complexity’.

Results

Our results show that alpha-shapes can be used to quantify interspecific variation in shape ‘complexity’ within biological structures of disparate geometry. The ‘stepped’ nature of alpha curves is informative with regards to the contribution of specific morphological features to overall ‘complexity’. Alpha-shapes agrees with other measures of complexity (dissection index, Dirichlet normal energy) in identifying ursid bacula as having low shape complexity. However, alpha-shapes estimates mustelid bacula as being most complex, contrasting with other shape metrics. 3D fractal dimension is identified as an inappropriate metric of complexity when applied to bacula.

Conclusions

Alpha-shapes is used to calculate ‘optimal’ alpha refinement as a proxy for shape ‘complexity’ without identifying landmarks. The implementation of alpha-shapes is straightforward, and is automated to process large datasets quickly. We interpret alpha-shapes as being particularly sensitive to concavities in surface topology, potentially distinguishing it from other shape complexity metrics. Beyond genital shape, the alpha-shapes technique holds considerable promise for new applications across evolutionary, ecological and palaeoecological disciplines.