Enzymatic saccharification of banana peel and sequential fermentation of the reducing sugars to produce lactic acid

Simple one-step treatment for saccharification of mango peels using an optimized enzyme cocktail of Aspergillus niger ATCC 9642

Developing efficient microbiological methods to convert polysaccharide-rich materials into fermentable sugars, particularly monosaccharides, is vital for advancing the bioeconomy and producing renewable chemicals and energy sources. This study focused on optimizing the production conditions of an enzyme cocktail from Aspergillus niger ATCC 9642 using solid-state fermentation (SSF) and assessing its effectiveness in saccharifying mango peels through a simple, rapid, and efficient one-step process. A rotatable central composite design was employed to determine optimal conditions of moisture, time, and pH for enzyme production in SSF medium. The optimized enzyme cocktail exhibited cellulase activity (CMCase) at 6.28 U/g, filter paper activity (FPase) at 3.29 U/g, and pectinase activity at 117.02 U/g. These optimal activities were achieved with an SSF duration of 81 h, pH of 4.66, and a moisture content of 59%. The optimized enzyme cocktail effectively saccharified the mango peels without the need for chemical agents. The maximum saccharification yield reached approximately 81%, indicating efficient conversion of mango peels into sugars. The enzyme cocktail displayed consistent thermal stability within the tested temperature range of 30-60°C. Notably, the highest sugar release occurred within 36 h, with glucose, arabinose, galactose, and xylose being the primary monosaccharides released during saccharification. This study highlights the potential application of Aspergillus niger ATCC 9642 and SSF for enzymatic production, offering a simple and high-performance process for monosaccharide production. The optimized enzyme cocktail obtained through solid-state fermentation demonstrated efficient saccharification of mango peels, suggesting its suitability for industrial-scale applications.

Chitin/chitosan extraction from shrimp shell waste by a completely biotechnological process

Two lactic bacteria were used in sequential co-cultures to demineralize (DM) and deproteinize (DP) shrimp shells (SS) to obtain chitin. During the first 24 h, Lactobacillus delbrueckii performed the DM in a minimal medium containing 100 g/L SS and 50 g/L glucose. Then, three different conditions were assayed to complete DM and perform the DP stage: 1) Bifidobacterium lactis was added with 35 g/L of glucose (Ld-G → Bl-G); 2) only B. lactis was added (Ld-G → Bl); and 3) a 35 g/L pulse of glucose was added, and at 48 h, B. lactis was inoculated (Ld-G → G → Bl). The highest DM (98.63 %) and DP (88 %) were obtained using a glucose pulse in the DM step and controlling the pH value above 6.0 in the DP step. Finally, a deacetylases cocktail produced by Aspergillus niger catalyzed the deacetylation of the resulting chitin. The chitosan samples had a deacetylation degree higher than 78 % and a solubility of 25 % in 1.0 N acetic acid. The deacetylation yield was 74 % after a mild chemical treatment, with a molecular weight of 71.31 KDa. This work reports an entirely biological process to get chitin and chitosan from SS with high yields.

Sustainable curdlan biosynthesis by Rahnella variigena ICRI91 via alkaline hydrolysis of Musa sapientum peels and its edible, active and modified hydrogel for Quercetin controlled release

Despite the high demand for curdlan (Curd), its industrial implementation has not reached a mature stage due to the high cost of simple sugar feed stocks. Herein, Musa sapientum peels hydrolysate (MPH) was proposed for the first time as a sustainable medium for Curd generation and as an ameliorated functional biomaterial for quercetin (Quer) sustained release. In this study, banana peels have been hydrolysed by 3 % NaOH catalyst/ 60 °C, yielding high concentration of glucose 20.5 ± 0.04 and 24.3 ± 0.11 g/L and reducing sugar amount, respectively. Meanwhile, a novel local Rahnella variigena ICRI91 strain was isolated from soil, that was useful for Curd production and identified by 16S rRNA analysis. Furthermore, three-batch fermentation models were carried out using MPH for obtaining a sufficient yield of Curd. R. variigena ICRI91 accumulated a satisfactory Curd concentration; 10.3 ± 0.25 g/L; using 60 g/L MPH. On the other hand, the strain produced an impressive Curd yield; 21.5 ± 0.13 g/L with an attained productivity of 0.179 ± 0.01 g/L/h and a sugar consumption of 68 ± 0.25 % as the MPH content increased to 100 g/L. For the first time, Curd hydrogel was modified by different amount of Xylitol (Xyl), reaching good mechanical performance; 3.1 MPa and 75 % for tensile strength (TS) and elongation at break (EB), respectively. Curd/Xyl (3/5) hydrogel was then integrated with nanometer-sized quercetin nanocrystals (Quer NCs, 83 ± 0.12 nm) with high colloidal stability of -23 ± 0.05 mV. The interconnected H- bonding between Xyl and Curd was confirmed by FTIR and SEM. The generated biomaterial was tailored to exhibit a sustained Quer release over 72 h. It also has improved antibacterial efficacy against four bacterial pathogens compared to that of a free drug. In recognition of these merits, an edible polymeric nanomaterial has been proposed for the functional food and biomedicine sectors.

The Hyperproduction of Polyhydroxybutyrate Using Bacillus mycoides ICRI89 through Enzymatic Hydrolysis of Affordable Cardboard

Bioplastics are contemplated as remarkable substitutes for conventional plastics to accommodate green technological advancements. However, their industrial production has not been fully implemented owing to the cost of carbon resources. From another perspective, valorizing different paper mill wastes has become a prominent research topic. These materials may serve as an affording sustainable feedstock for bioplastic production. Adjustment of cardboard waste hydrolysate as suitable fermentation media for production of bacterial polyhydroxyalkanoates (PHAs) has been investigated. Cardboard samples were defibered and dried before enzymatic hydrolysis. The enzymatic degradation of commercial cellulase was monitored over 15 days. Interestingly, 18.2 ± 0.2 g/L glucose yield was obtained from 50 g cardboard samples using a 1.5% (v/v) enzyme concentration. The samples exhibited maximum weight loss values of 69-73%. Meanwhile, five soil samples were collected from local sites in Lodz, Poland. A total of 31 bacterial isolates were screened and cultured on Nile blue plates. Analysis of the 16S rRNA gene sequence of the most potent producer revealed 100% similarity to Bacillus mycoides. Cardboard hydrolysates whole medium, modified MSM with cardboard hydrolysate and nitrogen depleted MSM with cardboard hydrolysate were utilized for PHA production, followed by PHA productivity and cell dry weight (CDW) estimation compared to glucose as a standard carbon source. An impressive PHA accumulation of 56% CDW was attained when the waste hydrolysate was used as a carbon source. FTIR and NMR analysis of the isolated PHA indicated that functional groups of the polymer were related to PHB (polyhydroxybutyrate). Thermal analysis demonstrates that PHB and PHB-CB (PHB produced from cardboard hydrolysate) have degradation temperatures of 380 and 369 °C, respectively, which reflect the high thermal stability and heat resistance compared to the same properties for a standard polymer. This is the first demonstration of full saccharification of corrugated cardboard paper waste for high-level production of PHA. In addition, the attained PHB productivity is one of the highest levels achieved from a real lignocellulosic waste.

Conversion of banana peel into diverse valuable metabolites using an autochthonous Rhodotorula mucilaginosa strain

Low-cost substrates are an exciting alternative for bioprocesses; however, their complexity can affect microorganism metabolism with non-desirable outcomes. This work evaluated banana peel extract (BPE) as a growth medium compared to commercial Yeast-Malt (YM) broth in the native and non-conventional yeast Rhodotorula mucilaginosa UANL-001L. The production of carotenoids, fatty acids, and exopolysaccharides (EPS) was also analyzed. Biomass concentration (3.9 g/L) and growth rate (0.069 g/h) of Rhodotorula mucilaginosa UANL-001L were obtained at 200 g/L of BPE. Yields per gram of dry biomass for carotenoids (317 µg/g) and fatty acids (0.55 g/g) showed the best results in 150 g/L of BPE, while 298 µg/g and 0.46 mg/g, respectively, were obtained in the YM broth. The highest yield of EPS was observed in 50 g/L of BPE, a two-fold increase (160.1 mg/g) compared to the YM broth (76.3 mg/g). The fatty acid characterization showed that 100 g/L of BPE produced 400% more unsaturated compounds (e.g., oleic and ricinoleic acid) than the YM broth. Altogether, these results indicate that BPE is a suitable medium for producing high-value products with potential industrial applications.

Fermentative Lactic Acid Production From Lignocellulosic Feedstocks: From Source to Purified Product

The second (lignocellulosic biomass and industrial wastes) and third (algal biomass) generation feedstocks gained substantial interest as a source of various value-added chemicals, produced by fermentation. Lactic acid is a valuable platform chemical with both traditional and newer applications in many industries. The successful fractionation, separation, and hydrolysis of lignocellulosic biomass result in sugars' rich raw material for lactic acid fermentation. This review paper aims to summarize the investigations and progress in the last 5 years in lactic acid production from inexpensive and renewable resources. Different aspects are discussed-the type of raw materials, pretreatment and detoxification methods, lactic acid-producers (bacteria, fungi, and yeasts), use of genetically manipulated microorganisms, separation techniques, different approaches of process organization, as well as main challenges, and possible solutions for process optimization.

Enhancing the efficiency of L-tyrosine by repeated batch fermentation

L-tyrosine is a widely used aromatic amino acid with an increasing market demand. Improving the parameters of L-tyrosine production results in a more cost-effective process that is of great interest for industrial applications. E. coli GHLTYR-168 was used to ferment L-tyrosine, with a productivity of 1.73 g/(L·h) and a yield of 17.6%. To further increase its production efficiency, repeated batch fermentation was applied to L-tyrosine, in which both replacement time points and ratios were studied during different fermentations. The broth substitution time point had no significant effect on L-tyrosine subjected to repeated batch fermentation, and 70% broth replacement ratio was the best choice. Repeated batch fermentation was performed in 5 batches within 100 h, among which the efficiency of the third batch fermentation was the highest. In the third batch fermentation, the productivity and yield were 2.53 g/(L·h) and 30.1%, respectively. Compared with that during fed-batch fermentation, the productivity and yield of L-tyrosine increased by 43.8% and 74.0%, respectively, during repeated batch fermentation. This is the highest level of L-tyrosine fermentation reported so far. Thus, repeated batch fermentation of L-tyrosine can improve its production efficiency.

The Role of Fruit by-Products as Bioactive Compounds for Intestinal Health

The fruit processing industry generates large amounts of wastes (pomace, seeds, peels) that causes negative environmental impact with considerable treatment expenses. Nevertheless, various studies demonstrated that these by-products are still rich in bioactive compounds, especially dietary fibres and phenolic compounds, thus leading to significant chemical, physical and biological properties. These characteristics make fruits by-products a good source for new supplements in food products having important effect on intestinal function. Thus, the aim of this review is to evaluate the different bioactive compounds isolated from fruit by-products and to analyse their application in various formulations for the food and nutraceutical industries. In consideration of the biological properties of these compounds, their role in the functioning and action on intestine and gut flora was discussed.