A comprehensive study on the effect of light quality imparted by light-emitting diodes (LEDs) on the physiological and biochemical properties of the microalgal consortia of Chlorella variabilis and Scenedesmus obliquus cultivated in dairy wastewater

Evolving perspectives on lutein production from microalgae - A focus on productivity and heterotrophic culture

Increased consumer awareness for healthier and more sustainable products has driven the search for naturally sourced compounds as substitutes for chemically synthesized counterparts. Research on pigments of natural origin, such as carotenoids, particularly lutein, has been increasing for over three decades. Lutein is recognized for its antioxidant and photoprotective activity. Its ability to cross the blood-brain barrier allows it to act at the eye and brain level and has been linked to benefits for vision, cognitive function and other conditions. While marigold flower is positioned as the only crop from which lutein is extracted from and commercialized, microalgae are proposed as an alternative with several advantages over this terrestrial crop. The main barrier to scaling up lutein production from microalgae to the commercial level is the low productivity compared to the high costs. This review explores strategies to enhance lutein production in microalgae by emphasizing the overall productivity over lutein content alone. Evaluation of how culture parameters, such as light quality, nitrogen sufficiency, temperature and even stress factors, affect lutein content and biomass development in batch phototrophic cultures was performed. Overall, the total lutein production remains low under this metabolic regime due to the low biomass productivity of photosynthetic batch cultures. For this reason, we describe findings on microalgal cultures grown under different metabolic regimes and culture protocols (fed-batch, pulse-feed, semi-batch, semi-continuous, continuous). After a careful literature examination, two-step heterotrophic or mixotrophic cultivation strategies are suggested to surpass the lutein productivity achieved in single-step photosynthetic cultures. Furthermore, this review highlights the urgent need to develop technical feasibility studies at a pilot scale for these cultivation strategies, which will strengthen the necessary techno-economic analyses to drive their commercial production.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Effect of light stress on lutein production with associated phosphorus removal from a secondary effluent by the autoflocculating microalgae consortium BR-UANL-01

Microalgae have become promising microorganisms for generating high-value commercial products and removing pollutants in aquatic systems. This research evaluated the impact of sunlight intensity on intracellular pigment generation and phosphorus removal from secondary effluents by autoflocculating microalgae consortium BR-UANL-01 in photobioreactor culture. Microalgae were grown in a secondary effluent from a wastewater treatment plant, using a combination of low and high light conditions (photon irradiance; 44 μmol m-2 s-1 and ≈ 1270 μmol m-2 s-1, respectively) and 16:8 h light:dark and 24:0 h light:dark (subdivided into 18:6 LED:sunlight) photoperiods. The autoflocculant rate by consortium BR-UANL-01 was not affected by light intensity and achieved 98% in both treatments. Microalgae produced significantly more lutein, (2.91 mg g-1) under low light conditions. Phosphate removal by microalgae resulted above 85% from the secondary effluent, due to the fact that phosphorus is directly associated with metabolic and replication processes and the highest antioxidant activity was obtained in ABTS•+ assay by the biomass under low light condition (51.71% μmol ET g-1). In conclusion, the results showed that the autoflocculating microalgae consortium BR-UANL-01 is capable of synthesizing intracellular lutein, which presents antioxidant activity, using secondary effluents as a growth medium, without losing its autoflocculating activity and assimilating phosphorus.

Lighting the way to sustainable development: Physiological response and light control strategy in microalgae-based wastewater treatment under illumination

The Sustainable Development Goals link pollutant control with carbon dioxide reduction. Toward the goal of pollutant and carbon reduction, microalgae-based wastewater treatment (MBWT), which can simultaneously remove pollutants and convert carbon dioxide into biomass with value-added metabolites, has attracted considerable attention. The photosynthetic organism microalgae and the photobioreactor are the functional body and the operational carrier of the MBWT system, respectively; thus, light conditions profoundly influence its performance. Therefore, this review takes the general rules of how light influences the performance of MBWT systems as a starting point to elaborate the light-influenced mechanisms in microalgae and the light control strategies for photobioreactors from the inside out. Wavelength, light intensity and photoperiod solely or interactively affect biomass accumulation, pollutant removal, and value-added metabolite production in MBWT. Physiological processes, including photosynthesis, photooxidative damage, light-regulated gene expression, and nutrient uptake, essentially explain the performance influence of MBWT and are instructive for specific microalgal strain improvement strategies. In addition, light causes unique reactions in MBWT systems as it interacts with components such as photooxidative damage enhancers present in types of wastewater. In order to provide guidance for photobioreactor design and light control in a large-scale MBWT system, wavelength transformation, light transmission, light source distribution, and light-dark cycle should be considered in addition to adjusting the light source characteristics. Finally, based on current research vacancies and challenges, future research orientation should focus on the improvement of microalgae and photobioreactor, as well as the integration of both.

Role of culture solution pH in balancing CO2 input and light intensity for maximising microalgae growth rate

The interplay between CO2 input and light intensity is investigated to provide new insight to optimise microalgae growth rate in photobioreactors for environmental remediation, carbon capture, and biomass production. Little is known about the combined effect of carbon metabolism and light intensity on microalgae growth. In this study, carbonated water was transferred to the microalgae culture at different rates and under different light intensities for observing the carbon composition and growth rate. Results from this study reveal opposing effects from CO2 input and light intensity on the culture solution pH and ultimately microalgae growth rate. Excessive CO2 concentration can inhibit microalgae growth due to acidification caused by CO2 dissolution. While increasing light intensity can increase pH because the carboxylation process consumes photons and transfers hydrogen ions into the cell. This reaction is catalysed by the enzyme RuBisCO, which functions optimally within a specific pH range. By balancing CO2 input and light intensity, high microalgae growth rate and carbon capture could be achieved. Under the intermittent CO2 transfer mode, at the optimal condition of 850 mg/L CO2 input and 1089 μmol/m2/s light intensity, leading to the highest microalgae growth rate and carbon fixation of 4.2 g/L as observed in this study.

Evaluation of Growth and Production of High-Value-Added Metabolites in Scenedesmus quadricauda and Chlorella vulgaris Grown on Crude Glycerol under Heterotrophic and Mixotrophic Conditions Using Monochromatic Light-Emitting Diodes (LEDs)

This study aimed to examine the impact of crude glycerol as the main carbon source on the growth, cell morphology, and production of high-value-added metabolites of two microalgal species, namely Chlorella vulgaris and Scenedesmus quadricauda, under heterotrophic and mixotrophic conditions, using monochromatic illumination from light-emitting diodes (LEDs) emitting blue, red, yellow, and white (control) light. The findings indicated that both microalgae strains exhibited higher biomass yield on the mixotrophic growth system when compared to the heterotrophic one, while S. quadricauda generally performed better than C. vulgaris. In mixotrophic mode, the use of different monochromatic illumination affected biomass production differently on both strains. In S. quadricauda, growth rate was higher under red light (μmax = 0.89 d-1), while the highest biomass concentration and yield per gram of consumed glycerol were achieved under yellow light, reaching 1.86 g/L and Yx/s = 0.18, respectively. On the other hand, C. vulgaris demonstrated a higher growth rate on blue light (μmax = 0.45 d-1) and a higher biomass production on white (control) lighting (1.34 g/L). Regarding the production of metabolites, higher yields were achieved during mixotrophic mode in both strains. In C. vulgaris, the highest lipid (26.5% of dry cell weight), protein (63%), and carbohydrate (20.3%) contents were obtained under blue, red, and yellow light, respectively, thus indicating that different light wavelengths probably activate different metabolic pathways. Similar results were obtained for S. quadricauda with red light leading to higher lipid content, while white lighting caused higher production of proteins and carbohydrates. Overall, the study demonstrated the potential of utilizing crude glycerol as a carbon source for the growth and metabolite production of microalgae and, furthermore, revealed that the strains' behavior varied depending on lighting conditions.

Variability in Macro- and Micronutrients of 15 Rarely Researched Microalgae

Microalgae have enormous potential for human nutrition, yet the European Commission has authorized the consumption of only eleven species. Strains of fifteen rarely researched microalgae from two kingdoms were screened regarding their nutritional profile and value for human health in two cultivation phases. Contents of protein, fiber, lipids, fatty acids, minerals, trace elements and heavy metals were determined. In the growth phase, microalgae accumulated more arginine, histidine, ornithine, pure and crude protein, Mg, Mn, Fe and Zn and less Ni, Mo and I₂ compared to the stationary phase. Higher contents of total fat, C14:0, C14:1_n5, C16:1_n7, C20:4_n6, C20:5_n3 and also As were observed in microalgae from the chromista kingdom in comparison to microalgae from the plantae kingdom (p < 0.05). Conversely, the latter had higher contents of C20:0, C20:1_n9 and C18:3_n3 as well as Ca and Pb (p < 0.05). More precisely, Chrysotila carterae appeared to have great potential for human nutrition because of its high nutrient contents such as fibers, carotenoids, C20:6_n3, Mg, Ca, Mn, Fe, Se, Zn, Ni, Mo and I₂. In summary, microalgae may contribute to a large variety of nutrients, yet the contents differ between kingdoms, cultivation phases and also species.

Lutein production from microalgae: A review

Lutein production from microalgae is a sustainable and economical strategy to offer the increasing global demands, but is still challenged with low lutein content at the high-cell density for commercial production. This review summarizes the suitable conditions for cell growth and lutein accumulation, and presents recent cultivation strategies to further improve lutein productivity. Light and nitrogen play critical roles in lutein biosynthesis that lead to the efficient multi-stage cultivation by increasing lutein content at the later stage. In addition, metabolic and genetic designs for carbon regulation and lutein biosynthesis are discussed at the molecule level. The in-situ lutein accumulation in fermenters by regulating carbon metabolism is considered as a cost-effective direction. Then, downstream processes are summarized for the efficient lutein recovery. Finally, challenges of current lutein production from microalgae are discussed. Meanwhile, potential solutions are proposed to improve lutein content and drive down costs of microalgal biomass.

Recent advances on microalgae cultivation for simultaneous biomass production and removal of wastewater pollutants to achieve circular economy

Microalgae are known for containing high value compounds and its significant role in sequestering carbon dioxide. This review mainly focuses on the emerging microalgae cultivation technologies such as nanomaterials technology that can improve light distribution during microalgae cultivation, attached cultivation and co-cultivation approaches that can improve growth and proliferation of algal cells, biomass yield and lipid accumulation in microalgal. This review includes a comprehensive discussion on the use of microbubbles technology to enhance aerated bubble capacity in photobioreactor to improve microalgal growth. This is followed by discussion on the role of microalgae as phycoremediation agent in removal of contaminants from wastewater, leading to better water quality and high productivity of shellfish. The review also includes techno-economic assessment of microalgae biorefinery technology, which is useful for scaling up the microalgal biofuel production system or integrated microalgae-shellfish cultivation system to support circular economy.

A review on the current application of light-emitting diodes for microalgae cultivation and its fiscal analysis

Microalgae are the promising source of products having a low and high economic value that include feedstock and vitamin supplements. Presently, their cultivation is being carried out by using sunlight in the open raceway ponds. However, this process has disadvantages like fluctuations in irradiance of the sunlight due to climatic changes and bad weather. Artificial lights, exploiting light-emitting diodes are beneficial in increasing the volumetric productivity of the microalgal biomass as it provides continuous illumination in the photobioreactors and assist in the external and internal design. However, the application of light-emitting diodes accrues high input costs. Though the cost of light-emitting diodes was estimated long ago, there is no recent economic analysis of the same. This study aims to enlist the applications of light-emitting diodes in microalgal cultivation with reference to internally illuminated photobioreactors coupled with the evaluation of the cost and energy balance of the artificial lights. The calculation shows that the electrical energy cost incurred during the application of light-emitting diodes for microalgae cultivation is approximately USD 15.19 kg^-1 DW. The collective fraction of electrical energy transformed into chemical energy (microalgae biomass) is around 6-8%. The cost of the light-emitting diodes can be decreased by the application of an Arduino-based automated control system to control the power supply to LEDs, photovoltaic powered photobioreactors and additional light. These techniques of input cost reduction have also been explored deeply in the present study. As estimated, they can reduce the cost of light-emitting diodes by 50%.HighlightsDiscussion on the current application of light-emitting diodes for microalgae cultivationA broad discussion on internally illuminated photobioreactors and their modificationsMicroalgae cultivation cost exploiting LEDs' is around USD 15.19 kg^-1 DWNet conservation of electrical energy during the cultivation process is 6-8%Photovoltaic powered PBRs and Arduino microcontrollers will decrease cultivation cost.

Use of Fungal Mycelium as Biosupport in the Formation of Lichen-Like Structure: Recovery of Algal Grown in Sugarcane Molasses for Lipid Accumulation and Balanced Fatty Acid Profile

In this study, a lichen-like structure was obtained through the production of a unique biomass, formed by algae cells of Scenedesmus obliquus adhering to the mycelium of filamentous fungal Mucor circinelloides. This structure was composed in two steps; in the first one, microalgal cells and spores were incubated separately, and in the second one, after 72 h of growth, isolated, mature mycelium was harvested and added to cell culture. For spores’ incubation, a culture medium containing only 2 g·L⁻¹ of glucose and minerals was used. This culture medium, with low sugar content, provided a fungal biomass to the anchorage of microalgae cells. WC medium was used without and with sugarcane molasses supplementation for microalgae cells’ incubation. The lichen-type structure that was formed resulted in 99.7% efficiency in the recovery of microalgae cells and in up to 80% efficiency in the recovery of algae biomass in the lichen biomass composition. In addition, the resulting consortium attained a satisfactory lipid accumulation value (38.2 wt%) with a balanced fatty acid composition of 52.7% saturated plus monounsaturated fatty acids and 47.4% polyunsaturated fatty acids. Since fungal species are easy to recover, unlike microalgae, the lichen-like structure produced indicates an efficient low-cost bioremediation and harvesting alternative; in addition, it provides an oleaginous biomass for various industrial applications.

In Situ Transesterification of Microbial Biomass for Biolubricant Production Catalyzed by Heteropolyacid Supported on Niobium

Lubricants are substances of the foremost importance in the modern world, as they are essential to the proper functioning of various mechanisms. Most lubricants, however, are still made from petroleum fractions. I light of this, and due to various environmental problems, the search for feasible biolubricants has become essential. This study obtained biolubricants through the in situ transesterification of microbial biomass, containing at least 20 wt% of lipids. The following two distinct biomasses were evaluated: the marine microalgae, Dunaliella salina, and the consortium of microalgae-fungi, Scenedesmus obliquus and Mucor circinelloides. Microbial oil from both biomasses presented a fatty acid profile with high amounts of oleic acid. The oil of D. salina had a lower content of polyunsaturated fatty acids relative to the microbial consortium profile, which indicates that this is a good configuration for increasing biolubricant oxidation resistance. The catalyst used was a Keggin-structure heteropolyacid supported on niobium, H3PMo12O40/Nb2O5, activated at 150 °C, which had high transesterification yields, notwithstanding the feedstocks, which were rich in free fatty acids. The performed transesterification reactions resulted in excellent yields, up to 97.58% and 96.80%, for marine microalgae and the consortium, respectively, after 6 h at 250 °C, with 10 wt% of catalyst (related to the lipid amount). As such, the (H3PMo12O40/Nb2O5) catalyst could become an attractive option for producing biolubricants from microbial biomass.

Impact of light quality on freshwater phytoplankton community in outdoor mesocosms

In shallow lakes, wind wave turbulence alters underwater spectral composition, but the influence of this phenomenon on phytoplankton community structure is poorly understood. We used 100L mesocosms to investigate the influence of light quality on a natural phytoplankton community collected from Taihu Lake in China. The communities in mesocosms were exposed to sunlight filtered for white, blue, green, and red light, while wave-making pumps simulated wind wave turbulence similar to Taihu Lake. Over the course of experiment, each filtered light reduced the total phytoplankton abundance compared to white light. The mean abundance of phytoplankton in controls was 1.72, 1.78, and 7.89 times of that in the red, blue, and green light treatments. Red, blue, and green light significantly promoted the growth of cyanobacteria, green algae, and diatoms, respectively, and induced successional change of the phytoplankton species under the tested conditions. The proportion of Microcystis to total phytoplankton abundance in controls and red light shifted from 87.09% at the beginning to 37.95% and 56.30% at the end of the experiment, respectively, and maintained its dominance, whereas Microcystis lost its dominance and was replaced by Scenedesmus (53.78%) and Synedra (53.18%) in the blue and green light, respectively. Given the process of how these phytoplankton compete in designated spectrum, exploring these influences could help provide new insights into the dominance formation of toxic cyanobacteria.

Influence of wavelength photoperiods and N/P ratio on wastewater treatment with microalgae-bacteria

This research investigates the effect of mixing wavelength light photoperiods (12 h blue, 8 h blue: 4 h green, 4 h blue: 8 h green, and 12 h green) and N/P ratios (1.3 to 8.3) on the growth microalgae-bacteria systems, organic matter, and nutrient removals. The highest microalgae-bacteria growth performance (μ = 0.2 d^-1, 481.1 ± 15.3 mg DW L^-1) was observed when a 8 h blue: 4 h green mixed wavelength and a low N/P ratio were used. For both N/P ratios, biomass productivity was favored when using the blue light dominated at longer time periods. Mechanisms for nitrogen removal by assimilation depend on the N/P ratio, achieving assimilation between 49 and 65% at a low N/P ratio. High nitrogen removal (>50%) showed a strong relation with alkalinity culture conditions (pH > 8.5). The mixing of wavelength photoperiods seems to be a promising strategy to achieve high biomass productivity and nutrient removal. However, for optimal conditions, N/P ratios in the wastewater should be considered.

Variability in Macro- and Micronutrients of 15 Commercially Available Microalgae Powders

The nutrient composition of 15 commercially available microalgae powders of Arthrospira platensis, Chlorella pyrenoidosa and vulgaris, Dunaliella salina, Haematococcus pluvialis, Tetraselmis chuii, and Aphanizomenon flos-aquae was analyzed. The Dunaliella salina powders were characterized by a high content of carbohydrates, saturated fatty acids (SFAs), omega-6-polyunsaturated fatty acids (n6-PUFAs), heavy metals, and α-tocopherol, whereas the protein amounts, essential amino acids (EAAs), omega-3-PUFAs (n3-PUFAs), vitamins, and minerals were low. In the powder of Haematococcus pluvialis, ten times higher amounts of carotenoids compared to all other analyzed powders were determined, yet it was low in vitamins D and E, protein, and EAAs, and the n6/n3-PUFAs ratio was comparably high. Vitamin B₁₂, quantified as cobalamin, was below 0.02 mg/100 g dry weight (d.w.) in all studied powders. Based on our analysis, microalgae such as Aphanizomenon and Chlorella may contribute to an adequate intake of critical nutrients such as protein with a high content of EAAs, dietary fibers, n3-PUFAs, Ca, Fe, Mg, and Zn, as well as vitamin D and E. Yet, the nutritional value of Aphanizomenon flos-aquae was slightly decreased by high contents of SFAs. The present data show that microalgae are rich in valuable nutrients, but the macro- and micronutrient profiles differ strongly between and within species.