Use of MRI-based vertebral bone quality score (VBQ) of S1 body in bone mineral density assessment for patients with lumbar degenerative diseases

MRI-based Pedicle Bone Quality score: Correlation to Quantitative Computed Tomography Bone Mineral Density and its Role in Quantitative Assessment of Osteoporosis

BACKGROUND CONTEXT

Bone quality in the pedicle region generally determines screw pullout strength, insertion torque, and vertebral body loading characteristics. Dual-energy X-ray absorptiometry (DEXA), as the gold standard for evaluating bone mineral density (BMD), cannot measure the BMD of specific parts, such as pedicle, and DEXA is limited in many ways. Recent studies have shown a correlation between the magnetic resonance imaging (MRI)-based vertebral bone quality (VBQ) score and BMD measured using DEXA or quantitative computed tomography (QCT). However, no studies have been reported on the MRI-based pedicle bone quality (PBQ) score. Moreover, few studies have investigated the relationship between MRI-based PBQ and osteoporosis.

PURPOSE

To create a new site-specific MRI-based PBQ assessment method and assess its diagnostic capacity in patients with normal BMD and osteopenia/osteoporosis.

STUDY DESIGN/SETTING

A retrospective study.

PATIENT SAMPLE

A total of 156 patients underwent lumbar fusion surgery for chronic low back pain at our hospital between 2021 and 2022, with lumbar QCT and T1-weighted MRI performed before surgery.

OUTCOME MEASURES

Correlation of the PBQ score with QCT BMD, and the association between the PBQ score and presence of osteopenia/osteoporosis.

METHODS

BMD of the lumbar was calculated as the mean BMD of the L1 and L2 vertebral bodies on the basis of asynchronous QCT measurements. The PBQ score, which is the average of the bone quality values of both pedicles on the basis of site-specific T1-weighted sagittal MRI images, was calculated by dividing the median signal intensity of the L1-L4 pedicles by the signal intensity of the cerebrospinal fluid at the L3 level. The interobserver reliability of the PBQ score was assessed using the intraclass correlation coefficient (ICC). A receiver operating characteristic curve was drawn, and the area under the curve (AUC) was calculated to assess the predictive performance of PBQ for osteoporosis. The PBQ score was compared with QCT BMD, as the gold standard, using Pearson correlation analysis.

RESULTS

In total, 156 patients participated in this study, including 51 in the Normal BMD group and 105 in the osteopenia/osteoporosis group. The PBQ score in the osteopenia/osteoporosis group was significantly higher than that in the normal BMD group (3.19 ± 0.55 vs. 2.84 ± 0.51, p < 0.001). The VBQ and PBQ scores were calculated by two authors and were in good agreement (intraclass correlation coefficient = 0.949 and 0.929, respectively). Pearson's test showed a significant negative correlation between PBQ and QCT BMD (r = -0.4887, p < 0.001). The optimal cutoff PBQ score to differentiate patients with osteopenia/osteoporosis from those with normal BMD was 3.160, with a sensitivity of 66.7%, specificity of 72.5%, and AUC of 0.776. The PBQ score correlated more strongly with QCT BMD (r = -0.4887) than VBQ (r = -0.4078).

CONCLUSIONS

In this study, we propose a novel, MRI-based pedicle-specific bone quality score. This is the first study to investigate the relationship between the PBQ score and QCT BMD. The PBQ score showed diagnostic utility, differentiating between patients with osteopenia/osteoporosis and those with normal BMD (AUC = 0.776), and the PBQ score correlated more strongly with QCT BMD than VBQ.

Assessing osteoporosis in postmenopausal women: preliminary results using a novel lumbar spine phantom-based MRI scoring method

OBJECTIVE

To develop a novel magnetic resonance imaging (MRI) phantom for producing F-score (for fat) and W-score (for water) and to evaluate the performance of these scores in assessing osteoporosis and related vertebral fractures.

MATERIALS AND METHODS

First, a real-time phantom consisting of oil and water tubes was manufactured. Then, 30 female volunteers (age: 62.3 ± 6.3 years) underwent lumbar spine examination with MRI (using a novel phantom) and dual-energy X-ray absorptiometry (DXA), following ethical approval. MRI phantom-based F-score and W-score were defined by normalizing the vertebral signal intensities (SIs) by the oil and water SIs of the phantom on T1- and T2-weighted images, respectively. The diagnostic performances of the new scores for assessing osteoporosis and vertebral fractures were examined using receiver operating characteristic analysis and compared with DXA-measured areal bone mineral density (DXA-aBMD).

RESULTS

The F-score and W-score were greater in the osteoporotic patients (3.93 and 2.29) than the non-osteoporotic subjects (3.05 and 1.79) and achieved AUC values of 0.85 and 0.74 (p < 0.05), respectively, when detecting osteoporosis. Similarly, F-score and W-score had greater values for the fracture patients (3.94 and 2.53) than the non-fracture subjects (3.14 and 1.69) and produced better AUC values (0.90 for W-score and 0.79 for F-score) compared to DXA-aBMD (AUC: 0.27, p < 0.05). In addition, the F-score and W-score had a strong correlation (r = 0.77; p < 0.001).

CONCLUSION

A novel real-time lumber spine MRI phantom was developed, based upon which newly defined F-score and W-score were able to detect osteoporosis and demonstrated an improved ability over DXA-aBMD in differentiating patients with vertebral fractures.

Opportunistic prediction of osteoporosis in patients with degenerative lumbar diseases: a simplified T12 vertebral bone quality approach

BACKGROUND

Osteoporosis is one of the risk factors for screw loosening after lumbar fusion. However, the probability of preoperative osteoporosis screening in patients with lumbar degenerative disease is low. Therefore, the aim of this study was to investigate whether a simplified vertebral bone quality (VBQ) score based on T12 T1-MRI could opportunistically predict osteoporosis in patients with degenerative lumbar spine diseases.

METHODS

We retrospectively analyzed cases treated for lumbar degenerative diseases at a single institution between August 2021 and June 2022. The patients were divided into three groups by the lowest T-score: osteoporosis group, osteopenia group, and normal bone mineral density (BMD) group. The signal intensity based on the T12 vertebral body divided by the signal intensity of the cerebrospinal fluid was calculated to obtain the simplified VBQ score, as well as the CT-based T12HU value and the traditional L1-4VBQ score. Various statistical analyses were used to compare VBQ, HU and DEXA, and the optimal T12VBQ threshold for predicting osteoporosis was obtained by plotting the receiver operating curve (ROC) analysis.

RESULTS

Total of 166 patients were included in this study. There was a statistically significant difference in T12VBQ scores between the three groups (p < 0.001). Pearson correlation showed that there was a moderate correlation between T12VBQ and T-score (r=-0.406, p < 0.001). The AUC value of T12VBQ, which distinguishes between normal and low BMD, was 0.756, and the optimal diagnostic threshold was 2.94. The AUC value of T12VBQ, which distinguishes osteoporosis from non-osteoporosis, was 0.634, and the optimal diagnostic threshold was 3.18.

CONCLUSION

T12VBQ can be used as an effective opportunistic screening method for osteoporosis in patients with lumbar degenerative diseases. It can be used as a supplement to the evaluation of DEXA and preoperative evaluation.

TRIAL REGISTRATION

retrospectively registered number:1502-009-644; retrospectively registered number date:27 oct 2022.

Application of a Magnetic Resonance Imaging-Based Lumbar Vertebral Bone Quality Scoring System in Patients with Degenerative Lumbar Scoliosis

BACKGROUND

Although dual-energy X-ray absorptiometry is still the gold standard for diagnosing osteoporosis, it can lead to inaccurate bone mineral density measurements due to lumbar degeneration and scoliosis. Many researchers have investigated diagnostic methods for osteoporosis in patients with degenerative lumbar scoliosis (DLS). This study aimed to investigate the differences between conventional vertebral bone quality (VBQ) scores and modified VBQ scores in patients with DLS and the influence of lumbar scoliosis on VBQ scores.

METHODS

We retrospectively collected the clinical and radiological data of 68 patients with DLS admitted to Sun Yat-sen Memorial Hospital from July 2018 to April 2023. The patients were classified into one of 2 groups based on the T score of the left femoral neck. VBQ scores relative to cerebrospinal fluid at different levels, VBQ scores on different planes and single-level VBQ scores were compared. Receiver operating characteristic analysis was also performed. Different modified VBQ scores were compared between the moderate scoliosis group (10°

RESULTS

There were no significant differences in VBQ scores relative to cerebrospinal fluid at different levels (P = 0.983), on different planes (P = 0.832) or at single-level (P = 0.996). All the VBQ scores were negatively correlated with the T score of the left femoral neck. There were no significant differences in the modified VBQ scores between the moderate and severe scoliosis groups.

CONCLUSIONS

Different modified VBQ scores can be used as supplementary methods for diagnosing osteoporosis in patients with DLS. Lumbar scoliosis may not significantly affect the VBQ score.

Collapse

Key Words

• Bone mineral density
• Degenerative lumbar scoliosis
• Magnetic resonance imaging
• Osteoporosis
• Vertebral bone quality score

Collapse

MESH Headings

• Humans
• Scoliosis/diagnostic imaging
• Female
• Lumbar Vertebrae/diagnostic imaging
• Male
• Aged
• Retrospective Studies
• Middle Aged
• Magnetic Resonance Imaging/methods
• Bone Density
• Absorptiometry, Photon/methods
• Osteoporosis/diagnostic imaging
• Osteoporosis/complications
• Aged, 80 and over

Collapse

Grants Collapse

Affiliation(s)

Wanli Zheng Department of Spine Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China; Department of Spine Surgery, The Eighth Affiliated Hospital of Sun Yat-sen University, Shenzhen, China
Weitao Han Department of Spine Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
Song Jin Department of Spine Surgery, The Eighth Affiliated Hospital of Sun Yat-sen University, Shenzhen, China
Mingxi Zhu Department of Spine Surgery, The Eighth Affiliated Hospital of Sun Yat-sen University, Shenzhen, China
Zhengqi Huang Department of Spine Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
Tianyu Qin Department of Spine Surgery, The Eighth Affiliated Hospital of Sun Yat-sen University, Shenzhen, China
Ming Shi Department of Spine Surgery, The Eighth Affiliated Hospital of Sun Yat-sen University, Shenzhen, China
Bo Gao Department of Spine Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
Wei Ye Department of Spine Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China.

Collapse

Simplified S1 Vertebral Bone Quality Score in the Assessment of Patients with Vertebral Fragility Fractures

OBJECTIVE

To evaluate the effectiveness of the S1 vertebral bone quality (VBQ) score in assessing bone quality among patients with vertebral fragility fractures (VFF). Additionally, whether the combination of S1 VBQ and Hounsfield unit (HU) values improves the predictive accuracy of VFF.

METHODS

Using lumbar noncontrast computed tomography and T1-weighted magnetic resonance imaging, we measured L1 HU values, S1 VBQ, and L1-L4 VBQ. To assess their predictive performance for VFF, we constructed receiver operating characteristic curves. We also compared the diagnostic efficacy of HU values with that of S1 VBQ and L1--L4 VBQ values for the joint diagnosis of VFF. The Delong test was used to compare the value of individual or combined predictions of VFF.

RESULTS

In comparison to the nonfracture group, all patients exhibited markedly elevated S1 VBQ and L1--L4 VBQ and notably reduced HU values (P < 0.001). Multivariate analysis revealed that elevated S1 VBQ, increased L1--L4 VBQ, and decreased HU values independently correlated with VFF development. The areas under the curve for VFF prediction were 0.806 for S1 VBQ, 0.799 for L1--L4 VBQ, and 0.820 for HU values. According to the Delong test, the combination of HU values with S1 VBQ/L1--L4 VBQ significantly improved the diagnostic accuracy.

CONCLUSIONS

The simplified S1 VBQ is a valuable tool for predicting the occurrence of VFF and can be used as an alternative to the L1--L4 VBQ. In addition, the combination of S1 VBQ and HU values can significantly improve the predictive value of VFF.

S1 vertebral bone quality score independently predicts pedicle screw loosening following surgery in patients with adult degenerative scoliosis

BACKGROUND CONTEXT

MRI-based vertebral bone quality (VBQ) score is an effective predictor of pedicle screw loosening after lumbar fusion surgery and has been recognized as a valuable tool for assessing preoperative bone quality. Due to the lateral curvature of lumbar spine of degenerative scoliosis, accurate measurement of VBQ score by conventional measurement methods that capture MRI signal intensity at L1-4 may be limited under certain conditions. To this end, a new simplified S1 VBQ score method has been proposed, which is comparable to the previous L1-4 VBQ score or S1 Hounsfield unit (HU) value, and has high accuracy and reliability.

PURPOSE

To evaluate the predictive value of MRI-based S1 VBQ score for pedicle screw loosening following surgery for adult degenerative scoliosis (ADS).

STUDY DESIGN/SETTING

Retrospective single-center cohort.

PATIENT SAMPLE

We reviewed 92 patients who underwent posterior lumbar interbody fusion (PLIF) with pedicle screw fixation for ADS between January 2017 and January 2020.

OUTCOME MEASURES

Association between S1 VBQ score and pedicle screw loosening following surgery for ADS.

METHODS

We retrospectively reviewed the records of all patients who performed PLIF between January 2017 and January 2020. The clear zone around pedicle screws≥1 mm can be identified as screw loosening. The S1 VBQ score is calculated from the S1 central-based non-contrast T1-weighted magnetic resonance imaging (MRI). The signal intensity (SI) of the cerebrospinal fluid (CSF) was then measured using ROI placed at the L3 level to normalize the results. Multivariate logistic regression analysis was performed to identify independent risk factors for screw loosening. Then, constructed a receiver operating characteristic (ROC) curve and determined the threshold (cut-off) of VBQ score with high sensitivity and specificity based on Youden Index.

RESULTS

A total of 92 patients were included, including 34 males and 58 females. The mean age of the patients was 61.23±1.23 years old. At 1-year follow-up, the screw loosening rate was 56.5% (52/92). The age and levels of fixation were higher in the loosening group than in the non-loosening group (p=.036, p=.025). Patients in the loosening group had a greater VBQ score compared to patients in the non-loosening group (3.31±0.41 vs 3.01±0.28, p=.001). Multivariate logistic regression analysis showed that advanced age (OR, 1.090; 95% CI 1.005-1.183; p=.039) and higher VBQ score (OR, 5.778; 95% CI 2.889-16.177; p=.001) were independent risk factors for screw loosening. In addition, the ROC curve were created to assess the role of VBQ score as predictors of screw loosening with a diagnostic accuracy of 74.6% (95% CI 64.2%-85.1%).The most suitable threshold for the VBQ score as determined by the Youden Index was 3.175 (sensitivity: 76.0%, specificity: 83.3%).

CONCLUSIONS

Higher S1 VBQ score was significantly associated with pedicle screw loosening following surgery for ADS. The S1 VBQ score can be used as an effective preoperative predictor, which has the potential clinical application.

Simplified S1 vertebral bone quality score independently predicts proximal junctional kyphosis after surgery for degenerative lumbar scoliosis

OBJECTIVE

Our study aimed to assess the effectiveness of the simplified S1 vertebral bone quality (VBQ) score in predicting the incidence of proximal junctional kyphosis (PJK) after surgery for degenerative lumbar scoliosis (DLS).

METHODS

We reviewed 122 patients with DLS who underwent posterior lumbar decompression and long-segment fusion surgery in our hospital from January 2016 to December 2020. The patients were classified into PJK group and non-PJK group. S1 VBQ scores are determined by signal intensity measurements taken from the mid-sagittal plane of T1-weighted non-contrast MRI. Logistic regression analysis was used to identify factors associated with PJK. Receiver-operating characteristic curve (ROC) analysis was used to evaluate the value of S1 VBQ score in predicting pedicle PJK after DLS.

RESULTS

122 DLS patients (90 females and 32 males) met the inclusion criteria. In addition, 27 patients (22.13%) had PJK at the time of last follow-up. VBQ was higher in PJK patients than non-PJK patients (3.58 ± 0.67 vs. 3.08 ± 0.54, p < 0.001). Preoperatively, patients in the PJK group had a greater TLK than those in the non-PJK group (20.00 ± 6.22 vs. 16.86 ± 5.38, p = 0.011). After surgery, patients in the PJK group had greater TLK (p < 0.001) and PJA (p < 0.001) compared with the non-PJK group. At final FU, patients in the PJK group had greater TK (p = 0.002), TLK (p < 0.001), SVA (p < 0.001), and PJA (p < 0.001) than patients in the non-PJK group (Table 4). In multivariate logistic regression analysis, higher VBQ score (OR 4.565, 95% CI 1.43-14.568, p = 0.010), advanced age (OR 1.119, 95% CI 1.021-1.227, p = 0.016), and larger TLK (OR 1.191, 95% CI 1.041-1.362, p = 0.011) were significant predictors of postoperative PJK in patients with DLS (Table 6). A statistically significant positive correlation existed between VBQ score and PJA change (r = 0.370, p < 0.001). We created ROC curves for VBQ scores as predictors of PJK with a diagnostic accuracy of 72.1% (95% CI 60.15-82.9%.The ideal limit for the VBQ score was 3.205 (sensitivity: 77.8%, specificity: 81.4%).

CONCLUSION

To the best of our knowledge, this is the first study to evaluate the effectiveness of the S1 VBQ score in predicting postoperative PJK in DLS. Our study included major risk factors and found that S1 VBQ score was a significant predictor of PJK in patients undergoing DLS surgery. The higher the S1 VBQ score, the higher the probability of PJK.

Evaluation of the modified MRI vertebral bone quality score for bone quality in lumbar degenerative disorders

OBJECTIVE

The traditional VBQ scoring method may lead to overestimation due to the concentration of intravertebral fat and vascular structures in the posterior half of vertebral bodies, potentially resulting in false-positive outcomes. This study aims to modify the measurement method of VBQ score (Modified-VBQ) and evaluate its effectiveness in evaluating bone quality of lumbar degenerative diseases.

METHODS

Retrospective analysis was conducted on clinical data from patients undergoing lumbar surgery for degenerative diseases between September 2022 and September 2023. Preoperative lumbar t1-weighted Magnetic resonance imaging was used for both modified and traditional VBQ scoring. Computed tomography (CT) images and dual-energy X-ray absorptiometry (DEXA) data were collected through the picture archiving and communication system. The effectiveness of the modified VBQ score was evaluated, considering P < 0.05 as statistically significant.

RESULTS

The study included 212 patients, revealing a significant difference between the modified VBQ and VBQ scores (P < 0.0001). Notably, patients with a history of hyperlipidemia exhibited a significant difference between the two scores (P = 0.0037). The area under the ROC curve (AUC) for the modified VBQ was 0.86, surpassing the VBQ score (AUC = 0.74). Linear regression analysis demonstrated a moderate to strong correlation between the modified VBQ and DEXA T-score (r = - 0.49, P < 0.0001) and a high correlation with CT Hounsfield units (HU) values (r = - 0.60, P < 0.0001).

CONCLUSION

The modified VBQ score provides a simple, effective, and relatively accurate means of assessing bone quality in lumbar degenerative diseases. Preoperative implementation of the modified VBQ score facilitates rapid screening for patients with abnormal bone quality.

Utility of MRI-based vertebral bone quality scores and CT-based Hounsfield unit values in vertebral bone mineral density assessment for patients with diffuse idiopathic skeletal hyperostosis

This study investigated bone mineral density assessment for patients with DISH. DXA-based T-scores overestimated bone quality, while MRI-based VBQ scores and CT-based HU values provided accurate assessments, particularly for advanced degenerative cases. This enhances accurate evaluation of BMD, crucial for clinical decision-making.

PURPOSE

To investigate the diagnostic effectiveness of DXA, MRI, and CT in assessing bone mineral density (BMD) for diffuse idiopathic skeletal hyperostosis (DISH) patients.

METHODS

Retrospective analysis of 105 DISH patients and 116 age-matched controls with lumbar spinal stenosis was conducted. BMD was evaluated using DXA-based T-scores, MRI-based vertebral bone quality (VBQ) scores, and CT-based Hounsfield unit (HU) values. Patients were categorized into three BMD subgroups. Lumbar osteophyte categories were determined by Mata score. Demographics, clinical data, T-scores, VBQ scores, and HU values were collected. Receiver operating characteristic (ROC) analysis identified VBQ and HU thresholds for diagnosing normal BMD using DXA in controls. Correlations between VBQ, HU, and lumbar T-score were analyzed.

RESULTS

Age, gender, and BMI showed no significant differences between DISH and control groups. DISH patients had higher T-score (L1-4), the lowest T-score, and Mata scores. VBQ and HU did not significantly differ between groups. In controls, VBQ and HU effectively diagnosed normal BMD (AUC = 0.857 and 0.910, respectively) with cutoffs of 3.0 for VBQ and 104.3 for HU. DISH had higher normal BMD prevalence using T-scores (69.5% vs. 58.6%, P < 0.05), but no significant differences using VBQ (57.1% vs. 56.2%, P > 0.05) and HU (58.1% vs. 57.8%, P > 0.05). Correlations revealed moderate correlations between HU and T-scores (L1-4) in DISH (r = 0.642, P < 0.001) and strong in controls (r = 0.846, P < 0.001). Moderate negative correlations were observed between VBQ and T-scores (L1-4) in DISH (r =  - 0.450, P < 0.001) and strong in controls (r =  - 0.813, P < 0.001).

CONCLUSION

DXA-based T-scores may overestimate BMD in DISH. VBQ scores and HU values could effectively complement BMD assessment, particularly in DISH patients or those with advanced lumbar degeneration.

Simplified S1 vertebral bone quality (vbq) score to assess proximal junctional kyphosis after Lenke 5 adolescent idiopathic scoliosis surgery

BACKGROUND

Proximal junctional kyphosis (PJK) is a common complication following corrective surgery for adolescent idiopathic scoliosis (AIS) with a Lenke 5 curve. Previous studies have suggested that PJK may be associated with osteopenia, which is prevalent in AIS patients. MRI-based vertebral bone quality (VBQ) scores have been proposed as a valuable tool to assess preoperative bone quality. However, accurately measuring VBQ scores in Lenke 5 AIS patients with a structural lumbar curve can be challenging. Recently, a simplified S1 VBQ score has been proposed as an alternative method when the traditional VBQ score is not applicable. This study aims to evaluate the predictive value of the simplified S1 VBQ score in predicting the occurrence of PJK after corrective surgery for Lenke 5 AIS.

METHODS

We conducted a retrospective analysis of patient data to assess the predictive utility of the S1 VBQ score for PJK in Lenke 5 AIS patients. Demographic, radiographic, and surgical data were collected, and S1 VBQ scores were calculated based on preoperative T1-weighted MRI images. Univariate analysis, linear regression, and multivariate logistic regression were performed to identify potential risk factors for PJK and to assess the correlation between other variables and the S1 VBQ score. Receiver operating characteristic analysis and area under the curve values were used to evaluate the predictive efficiency of the S1 VBQ score for PJK.

RESULTS

A total of 105 patients (aged 15.50 ± 2.36 years) were included in the analysis, of whom 24 (22.9%) developed PJK. S1 VBQ scores were significantly higher in the PJK group compared to the non-PJK group (2.83 ± 0.44 vs. 2.48 ± 0.30, P < 0.001), and there was a significant positive correlation between the S1 VBQ score and proximal junctional angle (PJA) (r = 0.46, P < 0.0001). Multivariate analysis revealed that the S1 VBQ scores and preoperative thoracic kyphosis (TK) were significant predictors of PJK.

CONCLUSION

This study provided evidence that higher S1 VBQ scores were independently associated with PJK occurrence following corrective surgery for Lenke 5 AIS. Preoperative measurement of the S1 VBQ score on MRI may serve as a valuable tool in planning surgical correction for Lenke 5 AIS.

Which Indicator Among Lumbar Vertebral Hounsfield Unit, Vertebral Bone Quality, or Dual-Energy X-Ray Absorptiometry-Measured Bone Mineral Density Is More Efficacious in Predicting Thoracolumbar Fragility Fractures?

OBJECTIVE

Hounsfield units (HU), vertebral bone quality (VBQ), and bone mineral density (BMD) can all serve as predictive indicators for thoracolumbar fragility fractures. This study aims to explore which indicator provides better risk prediction for thoracolumbar fragility fractures.

METHODS

Patients who have received medical attention from The First Affiliated Hospital of Anhui Medical University for thoracolumbar fragility fractures were selected. A total of 78 patients with thoracolumbar fragility fractures were included in the study. To establish a control group, 78 patients with degenerative spinal diseases were matched to the fracture group on the basis of gender, age, and body mass index. The lumbar vertebral HU, the VBQ, and the BMD were obtained for all the 156 patients through computed tomography, magnetic resonance imaging, and dual-energy x-ray absorptiometry (DEXA). The correlations among these parameters were analyzed. The area under curve (AUC) analysis was employed to assess the predictive efficacy and thresholds of lumbar vertebral HU, VBQ, and BMD in relation to the risk of thoracolumbar fragility fractures.

RESULTS

Among the cohort of 156 patients, lumbar vertebral HU exhibited a positive correlation with BMD (p < 0.01). Conversely, VBQ showed a negative correlation with HU, BMD (p < 0.05). HU and BMD displayed a favorable predictive efficacy for thoracolumbar fragility fractures (p < 0.01), with HU (AUC = 0.863) showcasing the highest predictive efficacy, followed by the DEXA-measured BMD (AUC = 0.813). VBQ (AUC = 0.602) ranked lowest among the 3 indicators. The thresholds for predicting thoracolumbar fragility fractures were as follows: HU (88),VBQ (3.37), and BMD (0.81).

CONCLUSION

All 3 of these indicators, HU, VBQ, and BMD, can predict thoracolumbar fragility fractures. Notably, lumbar vertebral HU exhibits the highest predictive efficacy, followed by the BMD obtained through DEXA scanning, with VBQ demonstrating the lowest predictive efficacy.

Vertebral bone quality score for opportunistic osteoporosis screening: a correlation and optimal threshold analysis

PURPOSE

This study investigated the vertebral bone quality (VBQ) score as a potential tool for opportunistic osteoporosis screening and its correlation with dual-energy X-ray absorptiometry (DXA) values.

METHODS

In a single-center retrospective cohort of 130 patients, VBQ and DXA measures were compared using various statistical analyses. The optimal VBQ threshold for predicting osteoporosis was determined using receiver operating characteristic (ROC) analysis.

RESULTS

VBQ exhibited a significant negative association with DXA values, suggesting that higher VBQ scores are indicative of lower bone density. Age and VBQ were significant predictors of osteoporosis, with both increasing the log-odds of the condition. An optimal VBQ threshold of 2.7 was determined, demonstrating fair discriminatory power and high negative predictive value.

CONCLUSION

The study highlighted the potential of VBQ as a diagnostic tool for osteoporosis with high intra- and inter-observer reliability. The optimal VBQ threshold of 2.7 can aid in ruling out osteoporosis and identifying individuals for further evaluation.

Assessing lumbar vertebral bone quality: a methodological evaluation of CT and MRI as alternatives to traditional DEXA

PURPOSE

The purpose of this study was to investigate the impact of various methods on the assessment of vertebral bone quality.

METHODS

A consecutive series of 427 candidates for lumbar disc replacement with lumbar DEXA and MRI and/or CT scans were included. Two measurement techniques were used on CTs-a sagittal and axial. From axial images, the upper, mid, and lower portions of each vertebral body were measured. Four MRI vertebral bone quality (VBQ) calculations were generated using separate equations.

RESULTS

All CT measures were highly correlated with each other, regardless of measurement or calculation method (range 0.925-0.995). Sagittal measurements were highly correlated with axial (r = 0.928, p < 0.001). CT values were correlated with DEXA (range 0.446-0.534). There was no benefit to measuring multiple axial images of each vertebral body vs. just midbody (r = 0.441 and 0.455, respectively). No MRI VBQ values were highly correlated with DEXA (r =  -  0.103, p = 0.045). In receiver operating curve analysis, the area under the curve ranged from 0.539 to 0.558, indicating poor ability of VBQ to identify osteoporosis/osteopenia.

CONCLUSION

CT produced values more closely related to DEXA, while MRI was less reliable for osteoporosis/osteopenia screening. On CT, there was no benefit to making multiple measurements for each vertebral body to calculate a composite. Measuring sagittal CT images produced values similar to axial and required less time. While assessing bone quality from existing images rather than getting an additional DEXA scan is appealing, the methods of measuring these images needs standardization to maximize their utility.