Carbon dots-based fluorescent probes for sensitive and selective detection of iodide

Fluorescent fiber-optic device sensor based on carbon quantum dot (CQD) thin films for dye detection in water resources

Industrialization, especially in textile industries, has led to increased use of dyes and pigments to impart colours to fabrics. Textile dyes are one of the chief emerging pollutants of water resources as industrial effluents. In the current research, we report the development and utilization of pH-sensitive carbon quantum dots (CQDs) immobilized in polymer thin films acting as sensors for textile dye detection. The CQDs and CQD-containing polymer films were characterized by various techniques like XRD, TEM, XPS, and CLSM. The synthesized CQD thin films possess a unique pH-sensitive property that can be used to detect various model acidic and basic dyes that are important components of industrial effluents from textile dyes. The detection capability of the sensor films was evaluated by spiking dyes in various water matrices, like household tap water and river water. The results indicate that pH-sensitive CQD thin film was able to detect three acidic dyes, namely methyl red, methyl orange, and bromocresol green, and one basic dye, methylene blue, in a linear range of 0-100 μM with a response time of 1 minute. The CQD thin-film sensors have a limit of detection of 26.4 ppb, 214.5 ppb, 46.2 ppb, and 29.7 ppb for methyl red, methyl orange, bromocresol green and methylene blue, respectively. The accuracy of detection performed by spiking studies in water resources indicated an ∼100% recovery value in all tested acidic and basic dyes. The sensor films were compared for analytical parameters using UV-visible-fluorescence spectroscopy and HPLC.

Progression of Quantum Dots Confined Polymeric Systems for Sensorics

The substantial fluorescence (FL) capabilities, exceptional photophysical qualities, and long-term colloidal stability of quantum dots (QDs) have aroused a lot of interest in recent years. QDs have strong and wide optical absorption, good chemical stability, quick transfer characteristics, and facile customization. Adding polymeric materials to QDs improves their effectiveness. QDs/polymer hybrids have implications in sensors, photonics, transistors, pharmaceutical transport, and other domains. There are a great number of review articles available online discussing the creation of CDs and their many uses. There are certain review papers that can be found online that describe the creation of composites as well as their many different uses. For QDs/polymer hybrids, the emission spectra were nearly equal to those of QDs, indicating that the optical characteristics of QDs were substantially preserved. They performed well as biochemical and biophysical detectors/sensors for a variety of targets because of their FL quenching efficacy. This article concludes by discussing the difficulties that still need to be overcome as well as the outlook for the future of QDs/polymer hybrids.

Copper-Modified Double-Emission Carbon Dots for Rapid Detection of Thiophanate Methyl in Food

The detection of food safety and quality is very significant throughout the food supply. Stable dual-emission copper-modified fluorescent carbon dots (Cu-CDs) were successfully synthesized by a simple and environment-friendly hydrothermal, which was used for the real-time detection of pesticide residues in agricultural products. By optimizing the reaction conditions, Cu-CDs showed two emission peaks, with the highest fluorescence intensities at 375 and 450 nm. The structure, chemical composition and optical properties of Cu-CDs were investigated by XRD, TEM and IR. The results showed that thiophanate methyl (TM) could induce fluorescence quenching of Cu-CDs with no other ligands by the electron transfer through π-π stacking. The synchronous response of the dual-emission sensor enhanced the specificity of TM, which showed remarkable anti-interference capability. The fluorescence quenching degree of Cu-CDs had a good linear relationship with the TM concentration; the low detection limit for a pear was 0.75 μM, and for an apple, 0.78 μM. The recoveries in the fruit samples were 79.70–91.15% and 81.20–93.55%, respectively, and the relative standard deviations (RSDs) were less than 4.23% for the pear and less than 3.78% for the apple. Thus, our results indicate the feasibility and reliability of our methods in detecting pesticide residues in agricultural products.

Colorimetric detections of iodide and mercuric ions based on a regulation of an Enzyme-Like activity from gold nanoclusters

A simple colorimetric method was developed for sensitive and selective detections of I^- and Hg²⁺. Histidine stabilized gold nanoclusters (His-AuNCs) were synthesized and catalyzed the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product. As a strong ligand toward gold, iodide (I^-) attached to the surface of the His-AuNCs and significantly enhanced the oxidase-like activity of the His-AuNCs. Based on this enhancement, a sensitive colorimetric response toward I^- was obtained. Furthermore, the strong interaction between Hg²⁺ and I^- was adopted for an indirect Hg²⁺ detection. Under the optimal conditions, the platform presented high selectivity for the determinations of I^- and Hg²⁺ in the ranges 0.02-1 µM and 0.05-0.8 µM, with detection limits as 3.3 nM and 8 nM respectively. This colorimetric assay was successfully applied for analysis of real samples.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

In Situ Direct Monitoring of the Morphological Transformation of Single Au Nanostars Induced by Iodide through Dual-Laser Dark-Field Microscopy: Unexpected Mechanism and Sensing Applications

Single nanoparticle imaging is a significant technique to help reveal the reaction mechanism and provides insight into the nanoparticle transformation. Here, we monitor the in situ morphological transformation of Au nanostars (GNSs) induced by iodide (I⁻) in real time using dark-field microscopy (DFM) with 638 nm red (R) and 534 nm green (G) laser coillumination. The two lasers are selected because the longitudinal localized surface plasmon resonance of GNSs is located at 638 nm and that for GNSs after transformation is at 534 nm. Interestingly, I⁻ can interact with GNSs directly without the engagement of other reagents, and upon increasing I⁻ concentrations, GNSs undergo color changes from red to orange, yellow, and green under DFM. Accordingly, green/red channel intensities (G/R ratios) are extracted by obtaining red and green channel intensities of single nanoparticles to weigh the morphological changes and quantify I⁻. A single nanoparticle sensor is constructed for I⁻ detection with a detection limit of 6.9 nM. Finally, a novel mechanism is proposed to elucidate this shape transformation. I⁻ absorbed onto the surface of GNSs binds with Au atoms to form AuI⁻, lowering the energy of its bond with other Au atoms, which facilitates the diffusion of this atom across the nanoparticle surface to low-energy sites at the concaves, thus deforming to spherical Au nanoparticles.

Dual Fluorometric Detection of Fe3+ and Hg2+ Ions in an Aqueous Medium Using Carbon Quantum Dots as a "Turn-off" Fluorescence Sensor

The present study aimed to develop a carbon dots-based fluorescence (FL) sensor that can detect more than one pollutant simultaneously in the same aqueous solution. The carbon dots-based FL sensor has been prepared by employing a facile hydrothermal method using citric acid and ethylenediamine as precursors. The as-synthesized CDs displayed excellent hydrophilicity, good photostability and blue fluorescence under UV light. They have been used as an efficient "turn-off" FL sensor for dual sensing of Fe³⁺ and Hg²⁺ ions in an aqueous medium with high sensitivity and selectivity through a static quenching mechanism. The lowest limit of detection (LOD) for Fe³⁺ and Hg²⁺ ions was found to be 0.406 µM and 0.934 µM, respectively over the concentration range of 0-50 µM. Therefore, the present work provides an effective strategy to monitor the concentration of Fe³⁺ and Hg²⁺ ions simultaneously in an aqueous medium using environment-friendly CDs.

Highly Sensitive Fingerprint Detection under UV Light on Non-Porous Surface Using Starch-Powder Based Luminol-Doped Carbon Dots (N-CDs) from Tender Coconut Water as a Green Carbon Source

This study aims to synthesize carbon dots from a natural resource and will be used to detect a latent fingerprint on a non-porous surface. The carbon dots (CDs) were prepared by adding luminol to coconut water and ethanol via a hydrothermal method. Luminol enhances the chemiluminescence of the CDs, which show more distinct blue light under a UV lamp compared with bare CDs. To detect the latent fingerprint, luminol carbon dots (N-CDs) were combined with commercial starch and stirred at room temperature for 24 h. Their characteristics and optical properties were measured using EDX-SEM, HR-TEM, FTIR, XPS, UV-visible absorption, and fluorescence. In this research, it was found that the N-CDs had a d-spacing of 0.5 nm and a size of 12.9 nm. The N-CDs had a fluorescence intensity 551% higher than the standard normally used. N-CDs can be used to detect latent fingerprints on a non-porous surface and are easy to detect under a UV lamp at 395 nm. Therefore, luminol has a high potential to increase sensitive and stable traces of chemiluminescence from the green CDs for forensic latent fingerprint detection.

Carbon dots: a novel platform for biomedical applications

Carbon dots (CDs) are a recently synthesised class of carbon-based nanostructures known as zero-dimensional (0D) nanomaterials, which have drawn a great deal of attention owing to their distinctive features, which encompass optical properties (e.g., photoluminescence), ease of passivation, low cost, simple synthetic route, accessibility of precursors and other properties. These newly synthesised nano-sized materials can replace traditional semiconductor quantum dots, which exhibit significant toxicity drawbacks and higher cost. It is demonstrated that their involvement in diverse areas of chemical and bio-sensing, bio-imaging, drug delivery, photocatalysis, electrocatalysis and light-emitting devices consider them as flawless and potential candidates for biomedical application. In this review, we provide a classification of CDs within their extended families, an overview of the different methods of CDs preparation, especially from natural sources, i.e., environmentally friendly and their unique photoluminescence properties, thoroughly describing the peculiar aspects of their applications in the biomedical field, where we think they will thrive as the next generation of quantum emitters. We believe that this review covers a niche that was not reviewed by other similar publications.

Highly fluorescent N doped C-dots as sensor for selective detection of Hg2+ in beverages

In this work, nitrogen doped carbon dots (NCDs) were synthesized through one step hydrothermal reaction using citric acid and ethylenediamine as precursors. The prepared NCDs exhibit high quantum yield of 67.4%, good stability, excellent selectivity and sensitivity. It was found that the NCDs have potential as a fluorescence sensor for the detection of Hg²⁺. Under optimal conditions, good linearity between the change in NCDs fluorescence intensity and Hg²⁺ concentration was obtained in the range of 0.3 to 2.0 μM with a detection limit at 0.24 μM. The possible detection mechanism was static quenching of NCDs by Hg²⁺. The established method was successfully applied to the determination of Hg²⁺ in beverage samples. The results indicated that the NCDs-based sensor has potential for detection of Hg²⁺ in real beverage sample.

Turn-on signal fluorescence sensor based on DNA derived bio-dots/polydopamine nanoparticles for the detection of glutathione

A convenient, fast, sensitive and highly selective fluorescence sensor for the detection of glutathione (GSH) based on DNA derived bio-dots (DNA bio-dots)/polydopamine (PDA) nanoparticles was constructed. The fluorescent switch of DNA bio-dots was induced to turn off because of fluorescence resonance energy transfer (FRET) reactions between DNA bio-dots and PDA. The presence of GSH blocked the spontaneous oxidative polymerization of dopamine (DA) to PDA, leading the fluorescent switch of DNA bio-dots to be "turned on". The degree of fluorescence recovery of DNA bio-dots is linearly correlated with the concentration of GSH within the range of 1.00-100 μmol L-1, and the limit of detection (LOD) is 0.31 μmol L-1 (S/N = 3, n = 9). Furthermore, the fluorescence sensor was successfully used to quantify GSH in human urine and glutathione whitening power, indicating the fluorescence sensor has potential in the detection of human body fluids and pharmaceutical preparations.

A facile fluorescent sensor based on nitrogen-doped carbon dots derived from Listeria monocytogenes for highly selective and visual detection of iodide and pH

Listeria monocytogenes-derived nitrogen-doped carbon dots served as a facile fluorescent sensor with excellent sensing performances for iodide with low detection limit of 20 nmol L−1 and wide pH range from 1.81 to 11.82.

Single Excited Dual Band Luminescent Hybrid Carbon Dots-Terbium Chelate Nanothermometer

The report introduces hybrid polyelectrolyte-stabilized colloids combining blue and green-emitting building blocks, which are citrate carbon dots (CDs) and [TbL]+ chelate complexes with 1,3-diketonate derivatives of calix[4]arene. The joint incorporation of green and blue-emitting blocks into the polysodium polystyrenesulfonate (PSS) aggregates is carried out through the solvent-exchange synthetic technique. The coordinative binding between Tb3+ centers and CD surface groups in initial DMF solutions both facilitates joint incorporation of [TbL]+ complexes and the CDs into the PSS-based nanobeads and affects fluorescence properties of [TbL]+ complexes and CDs, as well as their ability for temperature sensing. The variation of the synthetic conditions is represented herein as a tool for tuning the fluorescent response of the blue and green-emitting blocks upon heating and cooling. The revealed regularities enable developing either dual-band luminescent colloids for monitoring temperature changes within 25-50 °C through double color emission or transforming the colloids into ratiometric temperature sensors via simple concentration variation of [TbL]+ and CDs in the initial DMF solution. Novel hybrid carbon dots-terbium chelate PSS-based nanoplatform opens an avenue for a new generation of sensitive and customizable single excited dual-band nanothermometers.

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺ ) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺ . Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇ /F₅₉₀ and the concentration of Hg²⁺ . The detection range was 10-70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.

Carbon quantum dots as a sensitive fluorescent probe for quantitation of pregabalin; application to real samples and content uniformity test

A novel optical nano-sensor for the detection of pregabalin (PG) in its pharmaceutical (Lyrica®) capsules and biological samples was reported. For the fabrication of highly fluorescent carbon quantum dots (CQDts), a simple green hydrothermal approach was described, and ascorbic acid (AA) was used as a carbon source. The obtained CQDts were confirmed by spectroscopic characterization such as transmission electron microscopy (TEM) and Fourier-transform infrared (FTIR) spectra. The synthesized CQDts were capped by alcohol to form yellow emitters, showing strong fluorescent emission at 524 nm, and excitation at 356 nm. The method is based on fluorescence quenching of CQDts in the presence of PG. The proposed analytical method was validated according to ICH guidelines. PG was successively assayed in the concentration range of 4.0 to 100 μg/ml). The detection and quantitation limits were 1.12 and 3.39 μg/ml, respectively. The proposed method could be used in both quality control and pharmacokinetic research for the studied drug.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Nitrogen-doped fluorescence carbon dots as multi-mechanism detection for iodide and curcumin in biological and food samples

Iodine ion is one of the most indispensable anions in living organisms, particularly being an important substance for the synthesis of thyroid hormones. Curcumin is a yellow-orange polyphenol compound derived from the rhizome of Curcuma longa L., which has been commonly used as a spice and natural coloring agent, food additives, cosmetics as well as Chinese medicine. However, excess curcumin may cause DNA inactivation, lead to a decrease in intracellular ATP levels, and trigger the tissue necrosis. Therefore, quantitative detection of iodine and curcumin is of great significance in the fields of food and life sciences. Herein, we develop nitrogen-doped fluorescent carbon dots (NCDs) as a multi-mechanism detection for iodide and curcumin in actual complex biological and food samples, which was prepared by a one-step solid-phase synthesis using tartaric acid and urea as precursors without adding any other reagents. An assembled NCDs-Hg2+ fluorescence-enhanced sensor for the quantitative detection of I- was established based on a fluorescence "turn-off-on" mechanism in a linear range of 0.3-15 μM with a detection limit of 69.4 nM and successfully quantified trace amounts of I- in water samples and urine sample. Meanwhile, the as-synthesized NCDs also can be used as a fluorescent quenched sensor for curcumin detection based on the synergistic internal filtration effect (IFE) and static quenching, achieving a good linear range of 0.1-20 μM with a satisfactory detection limit of 29.8 nM. These results indicate that carbon dots are potential sensing materials for iodine and curcumin detection for the good of our health.

Nano-scale selective and sensitive optical sensor for metronidazole based on fluorescence quenching: 1H-Phenanthro[9,10-d]imidazolyl-calix[4]arene fluorescent probe

It is crucial to determine and control the metronidazole (MET) ingredient in food and pharmaceuticals for human health and food safety. Even though many sensors have been previously reported to detect MET, there is still a need for a highly selective and sensitive, easy, fast, cost-effective sensor in this area. Herein, we report a fluorescent calix[4]arene derivative (PIMC) for highly selective and sensitive and facile and rapid MET detection based on fluorescence (FL) quenching. The highest FL quenching occurs when PIMC is exposed to MET solution at 400 nm (λ_ex = 340). Owing to the quenching efficacy of MET linearly up to 5.5 × 10⁴ nM was obtained a detection limit of 2.44 nM. Besides, interferences of other pharmaceuticals and ions on probe performance were investigated. The FL probe was successful in MET detection without the assistance of any separation techniques in a pharmaceutical sample (tablet) with an acceptable recovery of 101.3%. The applicability of the current probe as a paper-based sensor to MET detection has been successfully tested. As a result, the proposed probe presents a fast and suitable strategy to sensitive and selective detect MET and proves a good potential for practical applications, especially pharmaceutical preparations.

Elucidating the Quenching Mechanism in Carbon Dot-Metal Interactions-Designing Sensitive and Selective Optical Probes

Overexposure to metals has significant adverse effects on human and animal health coupled with nefarious consequences to the environment. Sensitive tools to measure low contaminant levels exist, but often come at a high cost and require tedious procedures. Thus, there exists a need for the development of affordable metal sensors that can offer high sensitivity and selectivity while being accessible on a global scale. Here, carbon dots, prepared in a one-pot synthesis using glutathione and formamide, have been developed as dual fluorescent metal sensing probes. Following extensive characterization of their physico-chemical properties, it is demonstrated that dual fluorescence can be exploited to build a robust ratiometric sensor with low-ppb detection sensitivity in water. This investigation shows that these optical probes are selective for Pb2+ and Hg2+ ions. Using steady-state and dynamic optical characterization techniques, coupled with hard and soft acid-base theory, the underlying reason for this selective behavior was identified. These findings shed light on the nature of metal-carbon dot interactions, which can be used to tailor their properties to target specific metal ions. Finally, these findings can be applicable to other fluorescent nanoparticle systems that are targeted for development as metal sensors.

Leonardos I, Stalikas CD. Metabolomic Profiling Unveils the Impact of Non-Doped and Heteroatom-Doped Carbon Nanodots on Zebrafish (Danio rerio) Embryos

Recently, concern has been raised over the transport, transformation, and fate of carbon nanodots (CNDs) after their release into the environment. Their toxicity towards organisms and humans has recently been addressed as an important issue. In this study, a metabolomic approach was employed to obtain an insight into the effect of CNDs (either pristine or doped with nitrogen and nitrogen/sulfur) on zebrafish. Embryos were exposed to concentrations corresponding to lethal concentration (LC) LC₅₀ (550, 400, and 150 μg mL⁻¹), LC_50/2 (275, 200, and 75 μg mL⁻¹), and LC_50/4 (138, 100, and 38 μg mL⁻¹) of the three CNDs (non-doped, N-doped, and N,S-codoped, respectively) to scrutinize the interactions of the CNDs with the larvae. Numerous differences in the metabolic pathways were recorded in all cases. Seven metabolic pathways were detected in the control larvae. When the larvae were exposed to concentrations equal to LC₅₀, LC_50/2, and LC_50/4 of non-doped CNDs, 12, 12, and 3 metabolic pathways were detected, respectively. In the case of N-doped CNDs, 4, 7, and 4 pathways were detected, while in the case of N,S-codoped CNDs, 8, 5, and 5 pathways were detected when exposed to concentrations of LC₅₀, LC_50/2, and LC_50/4, respectively. In all cases, certain metabolic pathways were altered while others were either down-regulated or up-regulated. Some of these changes include the activation of alanine, aspartate, and glutamate metabolism, aminoacyl-tRNA biosynthesis, butanoate metabolism, D-glutamine, and D-glutamate metabolism, glutathione metabolism, selenoamino acid metabolism, valine, leucine, and isoleucine degradation pathways. Moreover, the deactivation of starch and sucrose metabolism, the glycine, serine, and threonine metabolism, among others, were recorded. Our findings underline the importance to further study the impact of CNDs on marine organisms. As zebrafish has been shown to share many similarities with humans in bioprocesses and genome, it can be assumed that CNDs may also pose a threat to human health.

Synthesis of blue fluorescent carbon dots and their application in detecting mercury and iodine based on "off-on" mode

In this study, a type of blue-emission fluorescent carbon dot was synthesized using malic acid, urea, and water. This material demonstrates strong stability to heat, ionic strength, and time. It was found that mercury ions can quench the blue fluorescence of the material, and using iodine ions, the fluorescence can be recovered. Hence, we designed an "off-on" mode to detect mercury and iodine ions using the carbon dots. The results showed that this material exhibits good selectivity and recovery rate. Concurrently, imaging experiments showed that this material demonstrates low cytotoxicity and can be used in cell fluorescence imaging. The study concludes that this material has wider application prospects in the future.

A Novel Eplerenone Ecofriendly Fluorescent Nanosensor Based on Nitrogen and Sulfur-Carbon Quantum Dots

In this work, a novel ecofriendly optical nanosensor for detection of Eplerenone (EPL) in biological samples was reported. Highly luminescent water-soluble nitrogen and sulfur doped carbon quantum dots (N, S-CQDs) have been prepared successfully. The synthesis was based on the reaction of thiosemicarbazide (TS) as source of N and S and citric acid (CA) as source of carbon in one-step aqueous base reflux treatment. The produced N, S-CQDs have a small particle size in the range of 4.7 nm with a high quantum yield (58.5%) and high emission intensity at 446 nm under excitation wavelength of 370 nm. The unique properties of N, S-CQDs make them useful tool as a nano fluorescent probe for sensitive determination of EPL. EPL has been found to decrease the fluorescence of S, N-CDs significantly through static quenching according to the Stern - Volmer plot. The decreased intensity of S, N-CDs fluorescence was proportional to EPL in the 0.2-3.0 μM range. The limit of detection and quantitation were 0.05 and 0.15 μM, respectively. The assay of EPL by this approach was successfully done in drug formulations and in spiked human serum samples.

"Luminescent carbon nanodots: Current prospects on synthesis, properties and sensing applications"

"Nanocarbon science" ignited interest owing to its substantial scope in biomedicine, energy and environment-beneficial applications. Carbon dots (C-dots), a multi-faceted nanocarbon material, emerged as a homologue to graphene and henceforth geared extensive investigation both on its properties and applications. Eximious properties like excitation-wavelength tunable fluorescence emission, up-converted photoluminescence, photon-induced electron transfer, low cytotoxicity, chiroptical behavior, high chemical and photostability set the ground for astounding applications of carbon dots. Abundant availability of raw "green" precursors complementary to other molecular/graphitic precursors make them environmentally benign, inexpensive and ultimately "nanomaterials of the current decade". This review focuses on the synthesis of carbon dots not only from natural sources but also from other carbonaceous precursors and contemplates the inherent but controversial properties. We also aim to garner the attention of readers to the recent progress achieved by C-dots in one of its prestantious area of applications as nanosensors.

A fluorescence imaging protocol for correlating intracellular free cationic copper to the total uptaken copper by live cells

A variety of fluorescence probes have been developed for fluorescence imaging of metals in biological cells. However, accurate quantification of metals with fluorescent approaches is challenging due to the difficulty in establishing a standard calibration curve in living cells. Herein, a fluorescence imaging protocol is developed for imaging intracellular Cu²⁺ and its correlation with the cellular uptake of copper. The total amount of intracellular Cu is detected by inductively coupled plasma mass spectrometry (ICP-MS) in parallel. Fluorescence imaging of Cu²⁺ is accomplished with Rhodamine B derivative modified carbon dots (CDs-Rbh) based on fluorescence resonance energy transfer (FRET) from CDs to rhodamine. Intracellular Cu²⁺ is correlated with fluorescence ratio at λ_em 500-600 nm (rhodamine) to λ_em 425-475 nm (CDs) with excitation at λ_ex 405 nm. It is found that Cu²⁺ is linearly correlated with the total intracellular uptaken copper content, with a linear correlation between the relative fluorescence ratio in fluorescence imaging and intracellular Cu derived from ICP-MS, including both Cu(I) and Cu(II) species. The linear calibration equation is lg(F₂/F₁) = 0.00148 m[Cu]-0.3622. This approach facilitates further investigation and elucidation of copper transition in live cells and the evaluation of their cytotoxicity.

The Cost-Effective Preparation of Green Fluorescent Carbon Dots for Bioimaging and Enhanced Intracellular Drug Delivery

Doxorubicin entrapped carbon dots (DOX-CDs) were prepared for bioimaging and enhanced intracellular drug delivery. The CDs were synthesized via the hydrothermal method using citrate and urea under 200 °C for 1 h. Then, DOX was successfully conjugated on the CDs via physicochemical interactions. The DOX-CDs exhibited good crystal structure, remarkable aqueous stability, excellent photoluminescence property, and a high quantum yield of 93%. The fluorescent images revealed that the DOX-CDs could be readily taken up by the cancer cells for cell labeling. Furthermore, endo-lysosomal pH-assisted DOX release behavior was observed from DOX-CDs, and the cytotoxicity of DOX-CDs was confirmed by the MTS assay against H0-8910 ovarian cancer cells. In addition, the CDs indicated bright fluorescent signal in the animal imaging test and demonstrated low toxicity after administration for 7 and 21 days. Therefore, the prepared CDs could be a promising imaging probe for biomedical imaging and intracellular drug delivery.

Label-free iodide detection using functionalized carbon nanodots as fluorescent probes

A label-free fluorescent nanoprobe for iodide ion (I^-) detection was developed based on the direct fluorescence quenching of spermine-functionalized carbon dots (SC-dots), whether in complex biological fluids or living cells. The positively charged SC-dots were fabricated via one-step microwave synthesis and exhibited excellent optical properties. Due to the strong quenching ability of I^-, SC-dots were utilized for I^- detection with high sensitivity and excellent selectivity, which offered a relatively low detection limit of 0.18 μM. This strategy was also successfully applied for I^- detections in human serum and HeLa cells. The detection process is facile, highly sensitive and selective, providing a new insight into the potential applications of SC-dots for anion nanoprobe designs in clinical diagnosis and other biologically related areas. Graphical abstract.

One-step microwave synthesis of N,S co-doped carbon dots from 1,6-hexanediamine dihydrochloride for cell imaging and ion detection

As a new member of the fluorescent carbon nanomaterial family, carbon dots (CDs) not only have outstanding photoluminescence properties and small size characteristics, but also contain favourable low cytotoxicity and biocompatibility, which could be the best choice to detect of ions to replace quantum dots for ions detection. Here, the N,S co-doped carbon dots (N/S-CDs) was synthesized by one-step microwave using 1,6-hexanediamine dihydrochloride and dimethyl sulfoxide as precursors, and their morphology and structure were characterized by TEM, XRD, XPS and FTIR. The optimal emission wavelength of the CDs was 512 nm with green fluorescence, and was red-shifted gradually as the excitation wavelength aggrandized. The synthesized CDs owned a well quantum yield of 24 %. It was further applied for the detection of MnO₄^- and Cr₂O₇^2- with an excellent detection limit of 0.34 μM and 0.23μM, respectively. Cr₂O₇^2- did not influence the N/S-CDs PL response of MnO₄^- in the presence of excessive Pb²⁺. Moreover, the obtained N/S-CDs demonstrated preeminent biocompatibility and could be resoundingly applied for cellular imaging.

Carbon dots with molecular fluorescence and their application as a "turn-off" fluorescent probe for ferricyanide detection

Highly fluorescent carbon dots (CDs) exhibiting molecular fluorescence were synthesized and successfully used for sensing ferricyanide based on fluorescence quenching. We conducted dialysis to purify the CDs and found that the dialysate is also fluorescent. From the mass spectra and quantum yield analyses of the dialysate, it is demonstrated that molecular fluorophores were also synthesized during the synthesis of CDs. By the comparison of fluorescence spectra between CDs and dialysate, it is established that the fluorescence emission of CDs partly originates from fluorophores that are attached to CDs' surface. The fluorescence quenching caused by ferricyanide is proved to be the overlap of absorption spectra between ferricyanide and CDs. The changes of the absorbance and fluorescence spectra are combined to enhance the detection sensitivity, and the limit of detection is calculated to be 1.7 μM. A good linear response of fluorescence-absorbance combined sensing toward ferricyanide is achieved in the range of 5-100 µM. This method is highly selective to ferricyanide among other common cations and anions, and it is also successfully applied in detecting ferricyanide in real water samples.

Bioimaging Applications of Carbon Nanodots: A Review

Carbon nanodots (CNDs) is the newest member of carbon-based nanomaterials and one of the most promising for the development of new, advanced applications. Owing to their unique and unparalleled physicochemical and photoluminescent properties, they are considered to be a rising star among nanomaterials. During the last decade, many applications have been developed based on CNDs. Among others, they have been used as bioimaging agents to label cells and tissues. In this review, we will discuss the advancements in the applications of CNDs in in the field of imaging, in all types of organisms (i.e., prokaryotes, eukaryotes, and animals). Selective imaging of one type of cells over another, imaging of (bio)molecules inside cells and tumor-targeting imaging are some of the studies that will be discussed hereafter. We hope that this review will assist researchers with obtaining a holistic view of the developed applications and hit on new ideas so that more advanced applications can be developed in the near future.

Facile method for iodide ion detection via the fluorescence decrease of dihydrolipoic acid/beta-cyclodextrin protected Ag nanoclusters

In this work, novel photoluminescent Ag nanoclusters (Ag NCs) with red emission are synthesized and successfully used for detecting iodide ion (I^-). The dihydrolipoic acid (DHLA) is used as the stabilizing agent and beta-cyclodextrin (β-CD) is used as the auxiliary stabilizing agent. DHLA and β-CD are combined with Ag atoms by the formation of AgS bonds and hydrophobic interaction, respectively. Functionalization of β-CD endows good photoluminescent properties and solubility in water to the Ag NCs. The obtained DHLA and β-CD-protected Ag NCs (DHLA/β-CD-Ag NCs) are spherical and display a dispersed state. However, the DHLA/β-CD-Ag NCs are aggregated in the presence of I^-, accompanied by the decrease in their fluorescence intensity. Because the integrity of β-CD cavities is retained on the surface of DHLA/β-CD-Ag NCs, which preserves their capability for I^- host-guest recognition, the DHLA/β-CD-Ag NCs combine with I^- through the formation of inclusion complexes. Based on this phenomenon, the prepared DHLA/β-CD-Ag NCs can be designed as a novel fluorescent probe for I^- detection. The limit of detection (LOD) is calculated as 0.06 μM, indicating that it is an ideal probe for I^- detection in practical applications.

A novel and sensitive fluorescent assay for artemisinin with graphene quantum dots based on inner filter effect

The authors describe a novel method for the determination of artemisinin (ART) by using graphene quantum dots (GQDs) as the fluorescent probes. This method is based on the fact that ART can react with p-aminophenylboronic acid (p-ABA) to produce p-aminophenol (p-AP). While in the presence of tyrosinase (TYR), p-AP can be oxidized into 4-amino-1,2-benzoquinone, which effectively quenched the fluorescence of GQDs due to the inner filter effect (IFE). By making use of these reactions, a novel and sensitive fluorescent assay for ART has been developed. The calibration curve for the determination of ART is linear in the range of 0.1-5 μM and 5-55 μM with the detection limit of 33 nM, which is more sensitive than most of other methods. Some common coexisting substances including Ca²⁺, Na⁺, Mg²⁺, K⁺, PO₄^3-, starch, lactose, dextrin, and magnesium stearat have negligible effects on the fluorescence intensity of GQDs-TYR-p-ABA system. Finally, the sensing system was successfully applied to the detection of the compound naphthoquine phosphate tablet samples with satisfactory recoveries. This IFE-based GQDs fluorescence sensing strategy is facile and sensitive for the determination of ART because neither the surface modification nor the linking between the receptor and the fluorophore is required.

Highly selective fluorescent visual detection of perfluorooctane sulfonate via blue fluorescent carbon dots and berberine chloride hydrate

As a kind of emerging persistent organic pollutants, perfluorooctane sulfonate (PFOS) and its salts have caused global ecosystem pollution. To develop rapid, sensitive and low-cost detection method of PFOS is of great importance. In this work, a novel sensing method has been proposed for the highly selective fluorescent visual detection of PFOS in aqueous solution based on carbon dots (CDs) and berberine chloride hydrate (BH). It was found that the fluorescence of CDs decreased apparently in the presence of berberine chloride hydrate in pH 6.09 Britton-Robinson (BR) buffer solution. When PFOS was added to the system, the fluorescence was restored slightly at 448 nm and enhanced apparently at 533 nm, but no phenomenon occurred with other perfluorinated compounds. As a consequence, an obviously distinguishable fluorescence color variation (from blue to light yellow) of solution was observed. Under the optimized experimental conditions, the enhanced fluorescence intensities at 533 nm are in proportion to the concentration of PFOS in the range of 0.22-50.0 μmol/L (R² = 0.9919), with a detection limit of 21.7 nmol/L (3σ). The proposed approach has been successfully applied to the detection of PFOS in environmental water samples with RSD ≤ 1.1%.

Hydrothermal synthesis of N-doped carbon dots from an ethanolamine–ionic liquid gel to construct label-free multifunctional fluorescent probes for Hg2+, Cu2+ and S2O32−

N-Doped carbon dots were synthesized and used to construct multifunctional fluorescent probes for Hg²⁺, Cu²⁺ and S₂O₃²⁻.

Fluorescence turn-on and turn-off sensing of pesticides by carbon dot-based sensor

Green chemistry C-Dot-based ‘turn-on’ and ‘turn-off’ fluorescence sensor for pesticides [imidacloprid (LOD ∼ 0.013 μM) and tetradifon (LOD ∼ 0.04 μM)] in aqueous solution.

Carbon Nanomaterials in Optical Detection

Owing to their unique optical, electronic, mechanical, and chemical properties, flexible chemical modification, large surface coverage and ready cellular uptake, various carbon nanomaterials such as carbon nanotubes (CNTs), graphene and its derivatives, carbon dots (CDs), graphene quantum dots, fullerenes, carbon nanohorns (CNHs) and carbon nano-onions (CNOs), have been widely explored for use in optical detection. Most of them are based on fluorescence changes. In this chapter, we will focus on carbon nanomaterials-based optical detection applications, mainly including fluorescence sensing and bio-imaging. Moreover, perspectives on future exploration of carbon nanomaterials for optical detection are also given.