Immobilization of horseradish peroxidase on amino-functionalized carbon dots for the sensitive detection of hydrogen peroxide

A new strategy to build electrochemical enzymatic biosensors using a nanohybrid material based on carbon nanotubes and a rationally designed schiff base containing boronic acid

We report a nanohybrid material obtained by non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with the new ligand (((1E,1'E)-(naphthalene-2,3-diylbis(azaneylylidene))bis(methaneylylidenedene)) bis(4-hydroxy-3,1-phenylene))diboronic acid (SB-dBA), rationally designed to mimic some recognition properties of biomolecules like concanavalin A, for the development of electrochemical biosensors based on the use of glycobiomolecules as biorecognition element. We present, as a proof-of-concept, a hydrogen peroxide biosensor obtained by anchoring horseradish peroxidase (HRP) at a glassy carbon electrode (GCE) modified with the nanohybrid prepared by sonication of 2.0 mg mL-1 MWCNTs and 0.50 mg mL-1 SB-dBA in N,N-dimethyl formamide (DMF) for 30 min. The hydrogen peroxide biosensing was performed at -0.050 V in the presence of 5.0 × 10-4 M hydroquinone. The analytical characteristics of the resulting biosensor are the following: linear range between 0.175 μM and 6.12 μM, detection limit of 58 nM, and reproducibility of 2.0 % using the same nanohybrid (6 biosensors), and 9.0 % using three different nanohybrids. The sensor was successfully used to quantify hydrogen peroxide in enriched milk and human blood serum samples and in a commercial disinfector.

Carbon dots and their interactions with recognition molecules for enhanced nucleic acid detection

Carbon Dots (C-dots) have exceptional fluorescence and incident wavelength alteration capabilities because of their π-π* electron transitions between the surface-trapped charges. They have clear, considerate and cost-effective applications in the domain of bio-sensing, optical imaging, medical diagnostics, fluorescence chemotherapy, forensics, and environmentology. Advances in the production process of C-dots can change their optical and chemical characteristics, allowing them to interact with a variety of chemicals and ions that can be exploited for the DNA detection in point-of-care devices. In the current scenario of pathogenic disease prevention, metagenomics and industrial processes, alternative genetic material identification is critical. This review focuses on the existing carbon dots-based DNA detection technologies and their interactions with other components such as metallic salts, dyes, and biological chemicals based on their surface charge distribution (positive or negative) employed in the DNA diagnostic devices and biosensors with their operating mechanism regarding their target component. These intriguing scientific discoveries and technologies will be extensively examined to translate them into real-world solutions which will have a significant societal and economic impact on overall well-being and innovation.

Novel biocatalysts based on enzymes in complexes with nano- and micromaterials

In today's world, there is a wide array of materials engineered at the nano- and microscale, with numerous applications attributed to these innovations. This review aims to provide a concise overview of how nano- and micromaterials are utilized for enzyme immobilization. Enzymes act as eco-friendly biocatalysts extensively used in various industries and medicine. However, their widespread adoption faces challenges due to factors such as enzyme instability under different conditions, resulting in reduced effectiveness, high costs, and limited reusability. To address these issues, researchers have explored immobilization techniques using nano- and microscale materials as a potential solution. Such techniques offer the promise of enhancing enzyme stability against varying temperatures, solvents, pH levels, pollutants, and impurities. Consequently, enzyme immobilization remains a subject of great interest within both the scientific community and the industrial sector. As of now, the primary goal of enzyme immobilization is not solely limited to enabling reusability and stability. It has been demonstrated as a powerful tool to enhance various enzyme properties and improve biocatalyst performance and characteristics. The integration of nano- and microscale materials into biomedical devices is seamless, given the similarity in size to most biological systems. Common materials employed in developing these nanotechnology products include synthetic polymers, carbon-based nanomaterials, magnetic micro- and nanoparticles, metal and metal oxide nanoparticles, metal-organic frameworks, nano-sized mesoporous hydrogen-bonded organic frameworks, protein-based nano-delivery systems, lipid-based nano- and micromaterials, and polysaccharide-based nanoparticles.

Folic Acid Adjustive Polydopamine Organic Nanoparticles Based Fluorescent Probe for the Selective Detection of Mercury Ions

Polydopamine fluorescent organic nanomaterials present unique physicochemical and biological properties, which have great potential application in bio-imaging and chemical sensors. Here, folic acid (FA) adjustive polydopamine (PDA) fluorescent organic nanoparticles (FA-PDA FONs) were prepared by a facile one-pot self-polymerization strategy using dopamine (DA) and FA as precursors under mild conditions. The as-prepared FA-PDA FONs had an average size of 1.9 ± 0.3 nm in diameter with great aqueous dispersibility, and the FA-PDA FONs solution exhibit intense blue fluorescence under 365 nm UV lamp, and the quantum yield is ~8.27%. The FA-PDA FONs could be stable in a relatively wide pH range and high ionic strength salt solution, and the fluorescence intensities are constant. More importantly, here we developed a method for rapidly selective and sensitive detection of mercury ions (Hg²⁺) within 10 s using FA-PDA FONs based probe, the fluorescence intensities of FA-PDA FONs presented a great linear relationship to Hg²⁺ concentration, the linear range and limit of detection (LOD) were 0-18 µM and 0.18 µM, respectively. Furthermore, the feasibility of the developed Hg²⁺ sensor was verified by determination of Hg²⁺ in mineral water and tap water samples with satisfactory results.

N, S-Doped Carbon Dots Prepared by Peanut Protein Isolates and Cysteamine as Highly Sensitive Fluorescent Sensors for Fe2+, Fe3+ and Lactoferrin

Lactoferrin (LF) is an iron-binding glycoprotein with various biological activities that has been extensively used in food and medical applications. Several methods for detecting LF have been reported, but they still face challenges in terms of sensitivity and simplicity of detection. To achieve an accurate and efficient detection of LF, we developed a method for the determination of LF in lactoferrin supplements using carbon dots (CDs) fluorescent probes. The N, S-doped PPI carbon dots (N, S-PPI-CDs) were prepared using a protein (peanut protein isolate) and cysteamine as precursors. The prepared N, S-PPI-CDs exhibited intense blue fluorescence and good biocompatibility, while the fluorescence intensity of the N, S-PPI-CDs showed a good linear relationship with Fe²⁺/Fe³⁺ concentration (0-2 μM). The N, S-PPI-CDs exhibited a high potential ability to rapidly detect Fe²⁺/Fe³⁺ within 30 s, with a limit of detection (LoD) of 0.21 μM/0.17 μM. Due to the reversible binding of LF to Fe, the N, S-PPI-CDs showed a high sensitivity and selectivity for LF, with a limit of detection (LoD) of 1.92 μg/mL. In addition, LF was quantified in real sample LF supplements and showed a fluctuation in recovery of less than 2.48%, further demonstrating the effectiveness of the fluorescent N, S-PPI-CDs sensor.

Biocompatible Carbon Dot Decorated α-FeOOH Nanohybrid for an Effective Fluorometric Sensing of Cr (VI) in Wastewater and Living Cells

This article reports the fluorometric detection of toxic hexavalent chromium Cr (VI)) in wastewater and Cr (VI) contaminated living cells using in-situ grown carbon quantum dots into the goethite (α-FeOOH) nano-matrix. The synthesized nano-hybrid shows enormous potential in determining the chromium contamination levels in various types of water samples. This selective fluorometric probe is enormously sensitive (LOD 81 nM) toward hexavalent chromium, which makes it a dedicated chromium sensor. Moreover, the sensing mechanism has been assessed using Stern-Volmer's equation and fluorescence lifetime experiments showing the simultaneous occurrence of photoinduced electron transfer and the inner filter effect. This chromium sensor has also been employed to assess the contamination level in real-life industrial wastewater. The performance of this probe in a real-life wastewater sample is quite commendable. Further, this biocompatible fluorometric probe has been used to demonstrate the in-vitro sensing of Cr (VI) in HeLa cells. The rapid detection mechanism of hexavalent chromium in living cells has been validated using theoretical docking simulations. Henceforth, this fluorometric sensor material could open new avenues not only in wastewater monitoring but also in biomedical applications.

Biorecognition of hydrogen peroxide using a novel electrochemical platform designed with Glossoscolex paulistus giant hemoglobin

The giant extracellular hemoglobin of the annelid Glossoscolex paulistus (HbGp; 3.6 MDa) is a valuable and underexplored supramolecular hemoprotein system for the biorecognition of reactive oxygen species. In this work, an efficient and simple electrochemical platform was designed for analyzing H₂O₂, using HbGp covalently immobilized on Nafion®-modified glassy carbon electrode, named as HbGp/Nafion/GCE. Voltammetric and spectroscopic studies revealed the importance of prior modification of the electrodic support with the conducting polymer to obtain satisfactory hemoglobin electroactivity, as well as a biocompatible microenvironment for its immobilization. In terms of biological activity, it was observed a greater reactivity of the biomolecule in acidic medium, enabling the detection of the analyte by a quasi-reversible mechanism, whose kinetics was limited by analyte diffusion. In the presence of H₂O₂, the native structure of hemoglobin (oxy-HbGp (Fe²⁺)) oxidizes to ferryl-HbGp (Fe⁴⁺) and this redox reaction can be monitored on HbGp/Nafion/GCE with a detection limit of 8.5 × 10^‒7  mol L^-1. In addition to high sensitivity, the electrochemical biosensor also provided reproducible, consistent, and accurate measurements. The electroanalytical method showed an appropriate performance to quantify different levels of H₂O₂ in milk samples, proving the potential of HbGp/Nafion/GCE for this purpose.

Multifunctional carbon nanomaterials for diagnostic applications in infectious diseases and tumors

Infectious diseases (such as Corona Virus Disease 2019) and tumors pose a tremendous challenge to global public health. Early diagnosis of infectious diseases and tumors can lead to effective control and early intervention of the patient's condition. Over the past few decades, carbon nanomaterials (CNs) have attracted widespread attention in different scientific disciplines. In the field of biomedicine, carbon nanotubes, graphene, carbon quantum dots and fullerenes have the ability of improving the accuracy of the diagnosis by the improvement of the diagnostic approaches. Therefore, this review highlights their applications in the diagnosis of infectious diseases and tumors over the past five years. Recent advances in the field of biosensing, bioimaging, and nucleic acid amplification by such CNs are introduced and discussed, emphasizing the importance of their unique properties in infectious disease and tumor diagnosis and the challenges and opportunities that exist for future clinical applications. Although the application of CNs in the diagnosis of several diseases is still at a beginning stage, biosensors, bioimaging technologies and nucleic acid amplification technologies built on CNs represent a new generation of promising diagnostic tools that further support their potential application in infectious disease and tumor diagnosis.

3D Printing of Micro- and Nanoscale Bone Substitutes: A Review on Technical and Translational Perspectives

Recent developments in three-dimensional (3D) printing technology offer immense potential in fabricating scaffolds and implants for various biomedical applications, especially for bone repair and regeneration. As the availability of autologous bone sources and commercial products is limited and surgical methods do not help in complete regeneration, it is necessary to develop alternative approaches for repairing large segmental bone defects. The 3D printing technology can effectively integrate different types of living cells within a 3D construct made up of conventional micro- or nanoscale biomaterials to create an artificial bone graft capable of regenerating the damaged tissues. This article reviews the developments and applications of 3D printing in bone tissue engineering and highlights the numerous conventional biomaterials and nanomaterials that have been used in the production of 3D-printed scaffolds. A comprehensive overview of the 3D printing methods such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), and ink-jet 3D printing, and their technical and clinical applications in bone repair and regeneration has been provided. The review is expected to be useful for readers to gain an insight into the state-of-the-art of 3D printing of bone substitutes and their translational perspectives.

Inhibition mechanism: Phytic acid, NADH as a peroxidase inhibitor

Peroxidase, a key enzyme causing enzymatic browning, and affected the potential values of fruit and vegetables. Phytic acid and NADH inhibited peroxidase in a competitive manner due to their reducing properties, and it's IC₅₀ (1.18 ± 0.32) × 10^-8, (8.02 ± 0.45) × 10^-6 mol L^-1, respectively. The interaction between phytic acid, NADH and peroxidase contributed to intrinsic fluorescence quenching and conformation alternation with a accuracy determination by multispectroscopic techniques (fluorescence spectra, FT-IR and CD spectra), respectively. Molecular docking simulation revealed that phytic acid, NADH interacted with His170, Ala34, Arg38, Ser73, Arg31, Lys174, Gln176, Asn175, Arg75; Gln176, Asn175, Phe221, Lys174, Gly173, Ser167, Phe172, Gly169, His170 in peroxidase, respectively and blocked substrates into catalytic reactions.

Nanostructured materials for harnessing the power of horseradish peroxidase for tailored environmental applications

High catalytic efficiency, stereoselectivity, and sustainability outcomes of enzymes entice chemists for considering biocatalytic transformations to supplant conventional synthetic routes. As a green and versatile enzyme, horseradish peroxidase (HRP)-based enzymatic catalysis has been widely employed in a range of biological and chemical transformation processes. Nevertheless, like many other enzymes, HRP is likely to denature or destabilize in harsh realistic conditions due to its intrinsic fragile nature, which results in inevitably shortened lifespan and immensely high bioprocess cost. Enzyme immobilization has proven as a prospective strategy for improving their biocatalytic performance in continuous industrial processes. Nanostructured materials with huge accessible surface area, abundant porous structures, exceptional functionalities, and high chemical and mechanical stability have recently garnered intriguing research interests as novel kinds of supporting matrices for HRP immobilization. Many reported immobilized biocatalytic systems have demonstrated high catalytic performances than that to the free form of enzymes, such as enhanced enzyme efficiency, selectivity, stability, and repeatability due to the protective microenvironments provided by nanostructures. This review delineates an updated overview of HRP immobilization using an array of nanostructured materials. Furthermore, the general physicochemical aspects, improved catalytic attributes, and the robust practical implementations of engineered HRP-based catalytic cues are also discussed with suitable examples. To end, concluding remarks, challenges, and worthy suggestions/perspectives for future enzyme immobilization are also given.

Synthesis of a CuNP/chitosan/black phosphorus nanocomposite for non-enzymatic hydrogen peroxide sensing

A copper-chitosan-black phosphorus nanocomposite (CuNPs-Chit-BP) was fabricated by electrochemically depositing copper nanoparticles onto a black phosphorus-modified glassy carbon electrode in chitosan solution. CuNPs demonstrated a uniform distribution on the Chit-BP modified GCE with an average size of 20 nm. Electrochemical methods were used to study the catalytic activity of the CuNPs-Chit-BP nanocomposite toward hydrogen peroxide. The results showed that the synthesized nanocomposite exhibited excellent electrical conductivity, good biocompatibility and highly efficient electrocatalytic activity toward hydrogen peroxide reduction in the range of 10 μM-10.3 mM with a detection limit of 0.390 μM. The present work proposed a new strategy to explore novel BP-based non-enzymatic biosensing platforms.

In Situ-Grown Cdot-Wrapped Boehmite Nanoparticles for Cr(VI) Sensing in Wastewater and a Theoretical Probe for Chromium-Induced Carcinogen Detection

In modern society, massive industrialization escalates environmental degradation by liberating various contaminants into the environment. Hexavalent chromium is a heavy metal that is being discharged from tannery and other industries, resulting in various carcinogenic diseases. This study reports a carbon dot (cdot)-based fluorometric probe for detecting hexavalent chromium in water. This is the very first time that cdots are tailored over the boehmite nanoparticle's surface using an in situ approach. Validation of formation of the nanocomposite has been discussed in detail employing the Rietveld refinement-based X-ray crystallography method. Vibrational spectroscopy and electron microscopy of the sample authenticate the nucleation process and the growth mechanism. The Stern-Volmer approach and time-resolved fluorescence measurements justify the sensitivity of the sensor (∼58 nM), and selectivity is analyzed by exposing the material to different ionic environments. Density functional theory (DFT) is applied herein to analyze the origin of fluorescence and the sensing mechanism of the probe, which shows that photoinduced electron transfer is responsible for the turn-off-based sensing of Cr(VI). The molecular docking simulation is carried out to ensure the binding of cdots to the binding pocket of the glutathione enzyme, which is responsible for treating reactive oxygen species-mediated DNA damage due to elements such as hexavalent chromium. Time-dependent density functional calculations show that the fluorometric probe is capable of detecting Cr(VI) in living cells making it an early stage chromium-mediated carcinogen detector.

Electrochemical assays for determination of H2O2 and prostate-specific antigen based on a nanocomposite consisting of CeO2 nanoparticle-decorated MnO2 nanospheres

A nanocomposite consisting of CeO₂ nanoparticle-decorated MnO₂ nanospheres (CeO₂@MnO₂) was synthesized for the first time via a hydrothermal method. CeO₂@MnO₂ was exploited to construct an electrochemical assays for detecting H₂O₂ and prostate-specific antigen (PSA) with square wave voltammetry (SWV). The electrochemical results proved that CeO₂@MnO₂ owned a better electrocatalytic effect towards H₂O₂ reduction than pure MnO₂ NS and CeO₂ NP due to the synergistic effect between MnO₂ NS and CeO₂ NP. Under optimized conditions, CeO₂@MnO₂-based assay can be applied to detect H₂O₂ in the range 1 to 3.0 × 10³ μmol L^-1. The label-free electrochemical immunoassay based on CeO₂@MnO₂ displayed linearly with concentrations of PSA from 0.005 to 50.0 ng mL^-1. The electrochemical assays also possessed acceptable sensitivity, selectivity, and stability. The study showed that CeO₂@MnO₂ hold great potential as a biosensing platform and the clinical determination of tumor markers in human serum. Graphical abstract A nanocomposite consisting of CeO₂ nanoparticles decorated MnO₂ nanospheres (CeO₂ @MnO₂) was firstly synthesized via a hydrothermal method. CeO₂@MnO₂ was firstly exploited to construct electrochemical assays for detecting H2O₂ and prostate-specific antigen (PSA) with square wave voltammetry (SWV), respectively. The electrochemical results proved that CeO₂@MnO₂ owned better electrocatalysis towards H₂O₂ reduction than pure MnO₂ NS and CeO₂ NP due to the synergistic effect between MnO₂ NS and CeO₂ NP. Under optimized conditions, CeO₂@MnO₂ based assay relative to the H₂O₂ system can be applied to detect H₂O₂ with range from 1 to 3.0 × 10³ μmol L^-1. The label-free electrochemical immunoassay based on CeO₂@MnO₂ relative to the H₂O₂ system displayed linearly with concentrations of PSA from 0.005 to 50.0 ng mL^-1. The electrochemical assays also possessed acceptable sensitivity, selectivity and stability. The study showed that CeO₂@MnO₂ hold great potential for biosensing platform and the clinic determination of tumor markers in human serum.

Hierarchical 0D-2D bio-composite film based on enzyme-loaded polymeric nanoparticles decorating graphene nanosheets as a high-performance bio-sensing platform

Herein, we developed a hierarchical bio-composite sensing film by facile one-step electro-deposition of 0D enzyme-polymer nanoparticles (NPs) with 2D graphene oxide nanosheets as conductive supports and nanofillers, based on which an effective and robust enzymatic biosensor platform was constructed. Horseradish peroxidase (HRP) as a model enzyme was co-assembled with a photo-cross-linkable polypeptide of 2-hydroxyethyl methacrylate modified poly(γ-glutamic acid) (γ-PGA-HEMA), generating hybrid HRP@γ-PGA-HEMA nanoparticles (HRP@PGH NPs). Then HRP@PGH NPs and graphene oxide nanosheets (GO NSs) were simultaneously electrodeposited onto the electrode surface, obtaining a hierarchical 0D-2D bio-composite film. After subsequent electrochemical reduction of GO NSs into graphene nanosheets (GNSs) and following photo-cross-linking, the resultant nanostructured HRP@PGH/GNSs sensing film was successfully applied to construct an enzymatic biosensor for hydrogen peroxide (H₂O₂). The biosensor exerted high sensitivity, fast response, and good stability for H₂O₂ sensing. Satisfactory results were also demonstrated for its practical application in human serum samples, suggesting a promising application potential in biomedical diagnostics. The one-step generated 0D-2D bio-composite sensing film demonstrates synergetic effects from both the soft nanoparticles and hard conductive nanosheets, which would enlighten the innovative construction of composite nanomaterials and nanoarchitectonics for bio-sensing systems.

Advances in nanomaterial application in enzyme-based electrochemical biosensors: a review

Electrochemical enzyme-based biosensors are one of the largest and commercially successful groups of biosensors. Integration of nanomaterials in the biosensors results in significant improvement of biosensor sensitivity, limit of detection, stability, response rate and other analytical characteristics. Thus, new functional nanomaterials are key components of numerous biosensors. However, due to the great variety of available nanomaterials, they should be carefully selected according to the desired effects. The present review covers the recent applications of various types of nanomaterials in electrochemical enzyme-based biosensors for the detection of small biomolecules, environmental pollutants, food contaminants, and clinical biomarkers. Benefits and limitations of using nanomaterials for analytical purposes are discussed. Furthermore, we highlight specific properties of different nanomaterials, which are relevant to electrochemical biosensors. The review is structured according to the types of nanomaterials. We describe the application of inorganic nanomaterials, such as gold nanoparticles (AuNPs), platinum nanoparticles (PtNPs), silver nanoparticles (AgNPs), and palladium nanoparticles (PdNPs), zeolites, inorganic quantum dots, and organic nanomaterials, such as single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), carbon and graphene quantum dots, graphene, fullerenes, and calixarenes. Usage of composite nanomaterials is also presented.

A glassy carbon electrode modified with a nanocomposite prepared from Pd/Al layered double hydroxide and carboxymethyl cellulose for voltammetric sensing of hydrogen peroxide

A Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated using carboxymethyl cellulose as a green substrate via co-precipitation method. The synthesized nanocomposite was characterized using different methods such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy, and electrochemical techniques. A glassy carbon electrode (GCE) was then modified with the suspended composite to obtain an electrochemical sensor for hydrogen peroxide (H₂O₂). The voltammetric (cathodic) current of the modified GCE was measured at -380 mV (vs. Ag/AgCl), at the scan rate of 50 mV.s^-1. Results show a linear dynamic range of 1 to 120 μM, and a 0.3 µM limit of detection (at S/N = 3). Intraday and interday relative standard deviations are in the ranges of 4.9-5.4% and 6.8-7.3%, respectively. The sensor was applied for the determination of H₂O₂ in basil extracts, milk, and spiked river water samples. The recoveries are between 96.60 and 102.30%. Graphical abstractA Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated via co-precipitation method and was characterized using scanning electron microscopy, Energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy and electrochemical techniques. CMC@Pd/Al-LDH was used to fabricate H₂O₂ electrochemical sensor.

Carbon Dots: Diverse Preparation, Application, and Perspective in Surface Chemistry

Carbon dots (CDs) are a novel class of nanoparticles with excellent properties. The development of CDs involves versatile synthesis, characterization, and various applications. However, the importance of surface chemistry of CDs, especially in applications, is often underestimated. In fact, the study of the surface chemistry of CDs is of great significance in the explanation of the unique properties of CDs as well as the pursuit of potential applications. In this feature article, we do not only introduce the development of CDs in our group but also highlight their applications where surface chemistry plays a critical role.

A dual emission nanocomposite prepared from copper nanoclusters and carbon dots as a ratiometric fluorescent probe for sulfide and gaseous H2S

A series of dual-emission fluorescent probes was prepared from copper nanoclusters (Cu NCs) and carbon dots (CDs). They show two emission peaks (blue at 469 nm and red at 622 nm) when photoexcited at 365 nm. Upon exposure to sulfide, the Cu NCs will be deteriorated because they react with sulfide to form CuS. This results in the quenching of the red fluorescence of the Cu NCs, while the blue fluorescence of the CDs remains constant. Thus, the color of the nanocomposite changes from red to blue. The ratio of the fluorescences at the two wavelengths decreases linearly in the 2-10 ppb (26-128 nM) sulfide concentration range, and the limit of detection is 0.33 ppb (4.3 nM). The nanocomposite also was placed in an agar gel and then incorporated into a paper strip for fluorometric monitoring of gaseous hydrogen sulfide. Graphical abstract Schematic presentation of the synthesis of Cu NCs (copper nanoclusters)-CDs (carbon dots) dual-emission nano-assembly, Cu NCs-CDs-agar fluorescent film and their application for the detection of sulfide and H₂S.

Carbon-dot wrapped ZnO nanoparticle-based photoelectrochemical sensor for selective monitoring of H2O2 released from cancer cells

This study reports on a simple approach for the fabrication of an electrode modified with biocompatible C-dot wrapped ZnO nanoparticles for selective photoelectrochemical monitoring of H₂O₂ released from living cells. The biocompatibility of the ZnO nanoparticles was confirmed through in-vitro cellular testing using the MTT assay on Huh7 cell lines. The ZnO nanoparticles wrapped with dopamine-derived C-dots possess numerous catalytically active sites, excessive surface defects, good electrical conductivity, and efficient separation ability of photo-induced electrons and holes. These properties offer highly sensitive and selective non-enzymatic photo-electrochemical monitoring of H₂O₂ released from HeLa cells after stimulation with N-formylmethionyl-leucyl-phenylalanine. The sensor has a wide linear range (20-800 nM), low detection limit (2.4 nM), and reliable reproducibility, this implying its suitability for biological and biomedical applications. Graphical abstract Schematic of the fabrication of ZnO nanoparticles by using a plant extract as a reducing agent. Wrapping of ZnO with C-dots enhances the photoelectrocatalytic efficacy. Sensitive and selective photoelectrochemical monitoring of H₂O₂ released from cancer cells is demonstrated.

Carbon-based quantum particles: an electroanalytical and biomedical perspective

Carbon-based quantum particles, especially spherical carbon quantum dots (CQDs) and nanosheets like graphene quantum dots (GQDs), are an emerging class of quantum dots with unique properties owing to their quantum confinement effect.

Biogreen Synthesis of Carbon Dots for Biotechnology and Nanomedicine Applications

Over the past decade, carbon dots have ignited a burst of interest in many different fields, including nanomedicine, solar energy, optoelectronics, energy storage, and sensing applications, owing to their excellent photoluminescence properties and the easiness to modify their optical properties through doping and functionalization. In this review, the synthesis, structural and optical properties, as well as photoluminescence mechanisms of carbon dots are first reviewed and summarized. Then, we describe a series of designs for carbon dot-based sensors and the different sensing mechanisms associated with them. Thereafter, we elaborate on recent research advances on carbon dot-based sensors for the selective and sensitive detection of a wide range of analytes, including heavy metals, cations, anions, biomolecules, biomarkers, nitroaromatic explosives, pollutants, vitamins, and drugs. Lastly, we provide a concluding perspective on the overall status, challenges, and future directions for the use of carbon dots in real-life sensing.

A glassy carbon electrode modified with a bismuth film and laser etched graphene for simultaneous voltammetric sensing of Cd(II) and Pb(II)

Polyimide (PI) sheets were laser etched to obtain graphene-based carbon nanomaterials (LEGCNs). These were analyzed by scanning electron microscopy, X-ray diffraction and Raman spectroscopy which confirmed the presence of stacked multilayer graphene nanosheets. Their large specific surface and large number of edge-plane active sites facilitate the accumulation of metal ions. A glassy carbon electrode (GCE) with an in-situ plated bismuth film was modified with the LEGCNs to give a sensor with satisfactory response for the simultaneous determination of cadmium(II) and lead(II) by means of square wave anodic stripping voltammetry. It appears that is the first report on an electrochemical sensor based on the use of laser etched graphene for determination of heavy metal ions. Figures of merit for detection of Cd(II) include (a) a low and well separated working potential of -0.80 V (vs. Ag/AgCl), (b) a wide linear range (from 7 to 120 μg·L^-1), and a low detection limits 0.47 μg·L^-1. The respective data for Pb(II) are (a) -0.55 V, (b) 5 to 120 μg·L^-1, and (c) 0.41 μg·L^-1. The modified GCE displays remarkable repeatability, reproducibility, selectivity and stability. The sensor was applied to the simultaneous determination of Cd(II) and Pb(II) in spiked real water samples. The results confirm that the laser etching technique is an efficient tool for the preparation of carbon nanomaterials with high quality and great sensing performance. Graphical abstract Bismuth film and laser etched graphene-modified glassy carbon electrode (BF-LEGCN/GCE) for the simultaneous determination of cadmium(II) and lead(II) by square wave anodic stripping voltammetry.