Preparation of a boronate affinity material with ultrahigh binding capacity for cis-diols by grafting polymer brush from polydopamine-coated magnetized graphene oxide

Preparation of restricted-access boronate affinity adsorbent with excellent anti-protein adsorption property for directly extracting small cis-diol molecules from biological matrices

Boronate affinity adsorbents are of great promise in the enrichment of small cis-diol-containing molecules (cis-diols) from biological matrices. This work develops a restricted-access boronate affinity mesoporous adsorbent, in which boronate sites are only distributed on the internal surface of mesopores and the external surface is a strongly hydrophilic layer. The adsorbent has high binding capacities (30.3 mg g-1, 22.9 mg g-1 and 14.9 mg g-1 for dopamine, catechol and adenosine, respectively) in spite of removal of the boronate sites on the external surface of adsorbent. The adsorption specific of adsorbent towards cis-diols was assessed by dispersive solid-phase extraction (d-SPE) method, and the results show that the adsorbent can selectively extract small cis-diols in the biosamples while exclude proteins completely. Under the optimal d-SPE, the nucleosides and cis-diol drugs in human serum were successfully analyzed by coupling d-SPE with high-performance liquid chromatography. Where, the detection limits are between 6.1 and 13.4 ng mL-1 for four nucleosides, and 24.9 and 34.3 ng mL-1 for two cis-diol drugs; the relative recoveries of all the analytes vary from 84.1% to 110.1% (RSDs <13.4%, n = 6). The results indicate that the adsorbent can directly treat the real biosamples without the necessary protein precipitation steps in advance, thus simplifying the analysis process.

Bioconjugation of nanozyme and natural enzyme to enable a one-step cascade reaction for the detection of metabolites

Nanozyme, with enzyme-mimicking activity and excellent stability, has attracted extensive attention. However, some inherent disadvantages, including poor dispersion, low selectivity, and insufficient peroxidase-like activity, still limit its further development. Therefore, an innovative bioconjugation of a nanozyme and natural enzyme was conducted. In the presence of graphene oxide (GO), histidine magnetic nanoparticles (H-Fe₃O₄) were first synthesized by a solvothermal method. The GO-supported H-Fe₃O₄ (GO@H-Fe₃O₄) exhibited superior dispersity and biocompatibility because GO was the carrier and possessed outstanding peroxidase-like activity because of the introduction of histidine. Furthermore, the mechanism of the peroxidase-like activity of GO@H-Fe₃O₄ was the generation of •OH. Uric acid oxidase (UAO) was selected as the model natural enzyme and covalently linked to GO@H-Fe₃O₄ with hydrophilic poly(ethylene glycol) as a linker. UAO could specifically catalyze the oxidation of uric acid (UA) to generate H₂O₂, and subsequently, the newly produced H₂O₂ oxidized the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue ox-TMB under the catalysis of GO@H-Fe₃O₄. Based on the above cascade reaction, the GO@H-Fe₃O₄-linked UAO (GHFU) and GO@H-Fe₃O₄-linked ChOx (GHFC) were used for the detection of UA in serum samples and cholesterol (CS) in milk, respectively. The method based on GHFU exhibited a wide detection range (5-800 μM) and a low detection limit (1.5 μM) for UA, and the method based on GHFC exhibited a wide detection range (4-400 μM) and a low detection limit (1.13 μM) for CS. These results demonstrated that the proposed strategy had great potential in the field of clinical detection and food safety.

Polymer brush grafted immobilized metal ion affinity adsorbent based on polydopamine/polyethyleneimine-coated magnetic graphene oxide for selective enrichment of cytokinins in plants

An immobilized metal affinity (IMAC) adsorbent was prepared for selective enrichment of adenine type CKs, via grafting polymer chain pendant with iminodiacetic acid (IDA) from polydopamine (PDA)/polyethyleneimine (PEI)-coated magnetic graphene oxide (magGO) via surface-initiated-atom transfer radical polymerization (SI-ATRP). The prepared IMAC sorbent exhibited remarkable adsorption performances and good selectivity for adenine-type CKs and was utilized as a sorbent of magnetic solid-phase extraction (MSPE) for effective enrichment of four adenine-type CKs in bean sprouts. Under the optimized extraction conditions, an analytical method for four adenine type CKs in bean sprouts was established by combining the MSPE combined with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The recoveries of the analytes were between 80.4 ± 1.9% and 114.6 ± 1.5% (n = 3). The limits of detection (LODs) range from 0.63 to 2.30 pg⋅mL^-1. The relative standard deviations of intra-day and inter-day were less than 12.6%. The established method was successfully applied to the selective extraction and sensitive detection of trace adenine-type CKs in plant samples.

Reversible Adsorption and Detachment of Saccharomyces cerevisiae on Thermoresponsive Poly(N-isopropylacrylamide)-Grafted Fibers for Continuous Immobilized Fermentation

Biofilm-mediated continuous fermentation with cells immobilized has gained much attention in recent years. In this study, thermoresponsive poly(N-isopropylacrylamide)-grafted cotton fibers (PNIPAM-CF) were prepared via an improved surface-initiated atom transfer radical polymerization. The modification process imparted switchable wettability to the surface while maintaining the thermal stability and biocompatibility of the CF. During the ethanol transformation, the rapid, reversible cell adsorption and detachment of Saccharomyces cerevisiae were performed through the modulation of wettability, displaying the enhancement of immobilized biomass and immobilization efficiency from 2.20 g/L and 59.43% to 2.81 g/L and 93.32%, respectively. Moreover, the biofilm adsorption matched well with the Freundlich model, indicating that multilayer adhesion was the main mode of biofilm formation. Based on the accumulation of the biofilm, the fabrication and utilization of PNIPAM-CF improved the efficiency of continuous immobilized fermentation, making the ethanol production reach 26.34 g/L in the sixth batch of fermentation. Meanwhile, wettability regulation further enhanced the reusability of the carrier. Therefore, the findings of this study revealed that the application of smart materials in cell immobilization systems had broad prospects for achieving sustainable and continuous catalysis.

Magnetic borate-modified Mxene: A highly affinity material for the extraction of catecholamines

A novel magnetic borate-modified MXene composite was prepared by in situ growth of Fe₃O₄ particles onto the surface of phenylboronic acid modified Ti₃C₂T_x nanosheets. The magnetic composite possesses highly selective recognition properties to catecholamines, and high adsorption capacity (up to 319.6 μmol g^-1) for dopamine. Besides, the adsorption of urinary catecholamines can be accomplished within 2.0 min. The excellent adsorption performance can be assigned to its unique 2D layered structures, which helps to shorten the diffusion path and facilitate molecular transport. In addition, the multilayer adsorption and the synergetic interactions of borate affinity, van der Waals forces, hydrogen bonding and π-π stacking also contribute to the adsorption. By coupling the magnetic boronate affinity composites with high-performance liquid chromatography-fluorescence detection, a sensitive method for the determination of catecholamines in urine samples was proposed. The validation results revealed it can offer good linearities (correlation coefficients higher than 99%). The method detection limits were 0.06, 0.16, 0.03 and 0.14 ng mL^-1 for norepinephrine, epinephrine, dopamine and isoprenaline, respectively, and relative recoveries for these catecholamines were in the range of 98.56-108.1%, 92.56-110.0%, 98.79-112.3% and 88.14-97.81%, respectively. The proposed method was successfully applied to analyze the catecholamines in the urine samples from 15 healthy volunteers and 16 patients with Alzheimer's disease. The results indicated that the magnetic borate-modified Mxene composite possesses superior extraction performance, and can be used as an outstanding candidate for the extraction of catecholamines in pre-clinical or clinical studies.

ZIF-based boronic acid functionalized metal-organic frameworks for the enrichment of cis-diol-containing luteolin from food samples prior to HPLC

Zeolite imidazole framework-based boronic acid-functionalized metal-organic frameworks (ZIF-67@PDA@BA-Zr-MOFs) were developed as an adsorbent for solid phase extraction (SPE) of luteolin (LTL) from peanut shell samples. Herein, ZIF-67 as a support matrix, polydopamine (PDA) as a coating to introduce amino and hydroxyl groups on the matrix surface to fix metal-organic frameworks (MOFs), zirconium tetrachloride (ZrCl₄) as a precursor, terephthalic acid (TPA), and 3-carboxyphenylboronic acid (3-CPBA) as the mutual organic building blocks, and 3-CPBA was also a boronate affinity functional monomer. The effects of synthesis conditions, SPE conditions, selectivity, competitivity, reproducibility, and reusability were evaluated in detail. Under the optimal conditions, the maximum adsorption capacity is 71.4 mg g^-1. The utility of ZIF-67@PDA@BA-Zr-MOFs as an adsorbent for SPE of LTL is supported by the presence of the abundant pore structure, as well as the boronate affinity sites facilitated the rapid binding of the adsorbent to the template. The concentration of the extracted LTL was determined by the high-performance liquid chromatography-ultraviolet (HPLC-UV), with calibration plots being linear in the concentration range 0.05-100 mg L^-1 and a limit of detection (LOD) of 0.035 mg L^-1. The method was applied to determine the LTL in peanut shell samples and recovered the target analyte in the range 85.6% to 99.2% (the standard deviations are less than 3.3%, n = 3). In addition, we incorporated boronate affinity and MOFs material into an SPE system to provide a promising strategy to detect other cis-diol-containing analytes in the complex matrix.

Tannic acid-directed synthesis of magnetic and boronic acid-functionalized metal-organic frameworks for selective extraction and quantification of catecholamines in human urine

A novel magnetic borate-functionalized metal-organic framework nanocomposite was designed and fabricated for selective enrichment of catecholamines from human urine. Firstly, the polytannic acid (PTA) layer with natural low-cost and ecofriendly polyphenol tannic acid as the organic ligand and Fe³⁺ as the cross-linker was coated onto the surface of Fe₃O₄. Then, the borate-functionalized metal-organic framework (MIL-100(Fe)-B) with 5-boronobenzene-1,3-dicarboxylic acid as a ligand fragment was modified onto the PTA-coated Fe₃O₄ through a metal-ligand-fragment coassembly strategy. The obtained smart porous adsorbent Fe₃O₄@PTA@MIL-100(Fe)-B was confirmed by means of several characterization methods and then applied as an effective magnetic solid phase extraction (MSPE) sorbent for specific extraction of trace catecholamines in human urine. The Plackett-Burman design was used for screening the variables significantly affecting the extraction efficiency. Then, the significant factors were further investigated by the Box-Behnken design to determine the optimal extraction conditions. Under the optimal conditions, a method for selective MSPE combined with high-performance liquid chromatography with a fluorescence detector for the quantitation of catecholamines in human urine was developed and validated. With the proposed method, the linearity range was from 0.500 to 500 ng mL^-1 for norepinephrine and epinephrine and from 1.00 to 500 ng mL^-1 for dopamine. The detection limits were 0.050, 0.11, and 0.20 ng mL^-1 for norepinephrine, epinephrine, and dopamine, respectively. The recoveries from spiking experiments varied from 91.5 to 108% with relative standard deviations (RSDs) of 0.80-4.8%. The established method is rapid, sensitive, accurate, inexpensive, and ecofriendly and was successfully applied to the determination of the target catecholamines in human urine samples.

Preparation of bottlebrush polymer-modified magnetic graphene as immobilized metal ion affinity adsorbent for purification of hemoglobin from blood samples

An immobilized metal affinity (IMA) adsorbent was prepared by grafting bottlebrush polymer pendant with iminodiacetic acid (IDA) from the surface of polydopamine (PDA)-coated magnetic graphene oxide (magGO), via surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(hydroxyethyl methacrylate) (PHEMA) was grafted firstly from the PDA-coated magGO as the backbone, and then poly(glycidyl methacrylate) was grafted from the PHEMA chains via the second SI-ATRP to afford the bottlebrush polymer-grafted magGO Thereafter, IDA was anchored on the nanocomposites to produce the IMA adsorbent after chelating copper ions. The adsorbent was characterized by various physical and physicochemical methods. Its adsorption properties were evaluated by using histidine-rich proteins (bovine hemoglobin, BHb) and other proteins (lysozyme and cytochrome-C). The results show that its maximum adsorption capacity to BHb was 378.6 mg g^-1, and the adsorption equilibrium can be quickly reached within 1 h. The adsorbent has excellent reproducibility and reusability. It has been applied to selectively purify hemoglobin from human whole blood, indicating its potential in practical applications. Graphical abstract.

Stimuli-responsive degrafting of polymer brushes via addressable catecholato-metal attachments

Surface attached catecholato-metal complexes serve as polymer brush initiators with well-defined densities and enable stimuli-responsive degrafting of polymer brushes.

Multidentate boronate magnetic adsorbent assembled with polyhedral oligomeric silsesquioxanes and intramolecular diboronic acid for improving the binding strength toward glycoproteins

Boronate affinity is an important method for the enrichment and separation of cis-diol containing compounds, but most of the conventional boronate materials suffer from weak binding strength as well as low binding capacity towards glycoproteins due to the use of single boronic acids as ligands. In this work, a novel multidentate boronate magnetic adsorbent was assembled by using amined polyhedral oligomeric silsesquioxane as spacer and a diboronic acid as ligand. The specially designed adsorbent exhibited high adsorption capacity for cis-diols due to the high density of phenylbronic acid moieties. More interestingly, the dissociation constants toward glycoproteins on the material were lowered to be ∼10-6 M, being at least 3 orders lower than the single boronic acid bonded adsorbents. By comparing the binding properties of small molecules containing one and two pairs of cis-diols, the enhanced binding strength of glycoproteins on the multidentate boronate magnetic adsorbent was attributed to the synergistic binding of glycoproteins on the special interface. The new materials successfully captured glycoproteins from 1000-fold diluted egg white, suggesting that the material could be an optional alternative adsorbent for enriching trace glycoproteins from complex bio-samples.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Core-shell structured magnetic mesoporous carbon nanospheres derived from metal-polyphenol coordination polymer-coated Fe3 O4 and its application in the enrichment of phthalates from water samples

In this work, core-shell structured magnetic mesoporous carbon nanospheres were fabricated from the carbonization of metal-polyphenol coordination polymer-coated Fe₃ O₄ nanoparticles. The preparation method is simple, fast, versatile, and easy to scale up. Magnetic mesoporous carbon nanospheres exhibit a high specific surface area, high superparamagnetism, and high adsorption efficiencies for phthalates. Four phthalates were extracted from aqueous solutions by using magnetic mesoporous carbon nanospheres via magnetic solid phase extraction. Subsequent analysis was performed by using high-performance liquid chromatography with ultraviolet detection. The analytical method has good linearity in the concentration range of 1-200 ng/mL for diethyl phthalate, diisobutyl phthalate, and dicyclohexyl phthalate, and 3-200 ng/mL for dipropyl phthalate. The limits of detection were in the range of 0.10-0.62 ng/mL. Compared with previous methods, this method has a lower detection limit, wider linearity range, and faster adsorption and desorption rates. The results indicate that magnetic mesoporous carbon nanospheres are suitable for the enrichment of hydrophobic substances from aqueous solutions.

A facile and label-free ratiometric optical sensor for selective detection of norepinephrine by combining second-order scattering and fluorescence signals

In this work, a facile and label-free ratiometric sensor is constructed for selective determination of norepinephrine (NE) by coupling second-order scattering (SOS) and fluorescence, two different and independent optical signals. Herein, polyethyleneimine (PEI) dilute solution medium shows an intensive SOS signal without any fluorescence response. Interestingly, NE can be selectively induced by PEI to emit bright fluorescence, and meanwhile causes an observable decrease in the SOS signal due to the interactions between NE and PEI. The simultaneous variation of the two independent signals can be used for ratiometric sensing of NE. Under the optimal conditions, the resultant ratiometric sensor displays high sensitivity and selectivity toward NE by simultaneously monitoring fluorescence and SOS signals with the same excitation wavelength. The proposed sensor exhibits a good linear relationship versus NE concentration in the range of 10.0 nM-45.0 μM with a detection limit of 2.0 nM (S/N = 3) and has been successfully applied to the determination of NE in real samples without the use of any extra reagent. The combination of fluorescence and SOS signals provides a new scheme for ratiometric sensor design, greatly simplifying experimental procedure and effectively enhancing detection accuracy. Moreover, the proposed analytical strategy further broadens the application of dilute solutions of polymers in research into optical sensor and green analytical chemistry. Graphical abstract.

Preparation of salbutamol imprinted magnetic nanoparticles via boronate affinity oriented surface imprinting for the selective analysis of trace salbutamol residues

Salbutamol (SAL) is one of the most widely abused feed additives in animal husbandry.