A metal organic framework prepared from benzene-1,3,5-tricarboxylic acid and copper(II), and functionalized with various polysulfides as a sorbent for selective sorption of trace amounts of heavy metal ions

Microextraction by packed sorbent of some β-blocker drugs with chitosan@mof-199 bio-composite in human saliva, plasma, and urine samples

The current study introduces microextraction by packed sorbent (MEPS) to extract three beta-blocker drugs (propranolol, atenolol, and betaxolol) from biological samples. The separation and detection of the drugs were performed by high performance liquid chromatography followed by UV detection. A green approach was applied for synthesizing chitosan@MOF-199 bio-composite, which was packed into the initial part of a metal spinal (22 gage). The effective parameters on the adsorption and desorption efficiencies, including sample solution pH, eluent flow rate, cycle numbers, type and volume of eluent solvent were evaluated and optimized. Under optimal conditions linear ranges (LRs = 5-600 µg L-1), limits of detection (LODs = 1.5-4.5 µg L-1), and relative standard deviations (RSDs% = 4.7 -5.3% with three replicates and concentration of 100 µg L-1) were obtained. Relative recoveries (RR%) for plasma (77-99%), saliva (81-108%), and urine (80-112%) samples were obtained. In this study, the drug release profile of propranolol in urine was evaluated. The results showed that the highest amount of propranolol is released 4 h after taking the drug. Based on the obtained results, this is an effective, fast, sensitive, reproducible, green, and user-friendly method for beta-blocker drug extraction in biological samples.

Facile green preparation of single- and two-component modified activated carbon fibers for efficient trace heavy metals removal from drinking water

Trace heavy metals exist in drinking water, having great adverse effects on human health and making it a huge challenge to remove. Herein, novel materials have been prepared by a simple and green method using single- (polydopamine (PDA) or 2,3-dimercaptopropanesulfonic sodium (DMPS)) (PDA-OACF or DMPS-OACF) and two-component (PDA and DMPS) (DMPS-PDA-OACF) functionalized activated carbon fibers pretreated by hydrogen peroxide for the removal of trace heavy metals. The as-prepared DMPS-OACF (7.5,20) under DMPS addition of 7.5 mg and sonication time of 20 min retained large specific surface area, micro-mesoporous structure and rich functional groups and showed better adsorption performance for trace lead and mercury. It also exhibited wide applicable ranges of pH (3.50-10.50) and concentration (50-1136 μg L^-1), rapid adsorption kinetics, and excellently selective removal performance for trace lead. The maximum lead adsorption capacity reached 16.03 mg g^-1 when the effluent lead concentration met World Health Organization (WHO) standard and the adsorbent can be regenerated by EDTA solution. The fitting results of adsorption kinetics and isotherm models revealed that the lead adsorption process was multi-site adsorption on heterogeneous surfaces and chemical adsorption. The excellent adsorption properties for trace heavy metals were attributed that the sulfur/oxygen/nitrogen-containing functional groups boosted diffusion and adsorption by electrostatic attraction and coordination, suggesting that DMPS-OACF (7.5,20) has great application potential in the removal of trace heavy metals.

Application of Fe3O4@CNFs combined with deep eutectic solvent-based dual microextraction: a novel and green strategy for rapid determination of pesticides in edible oil samples

A novel, green, and effective strategy employing Fe₃O₄-modified carbon nanofibers (CNFs) combined with deep eutectic solvent (DES) is proposed as an extraction agent to extract five pesticides in edible oil samples via dual microextraction modes, followed by high-performance liquid chromatography for determination. The Fe₃O₄@CNFs nanomaterial and a sequence of hydrophilic DES were prepared at first and then characterized by multiple techniques. Subsequently, the extraction performance of DES and Fe₃O₄@CNFs-DES was compared and Fe₃O₄@CNFs-DES exhibited better extraction ability. After that, several influencing parameters such as the composition of DES, the amount of Fe₃O₄@CNFs-DES, the dispersion methods, and the extraction time were investigated and optimized. Eventually, Fe₃O₄@CNFs as the solid adsorbent combined with tetrabutylammonium chloride-lactic acid-based DES as the extraction solvent were selected to extract target pesticides from oil samples. The established method received good linearity in the range 25-1000 ng·g^-1. The limits of detection for all analytes were in the range 2.25-7.50 ng·mL^-1. Satisfactory recoveries of target pesticides were obtained (ranging from 82 to 117%) with a relative standard deviation of 0.26-9.46%. The proposed method has been successfully applied to the rapid detection of target pesticides in oil samples, demonstrating its great potential for quick screening and analysis.

Functionalized dual modification of covalent organic framework for efficient and rapid trace heavy metals removal from drinking water

A key challenge in trace heavy metals removal from drinking water by adsorption technology is to achieve high adsorption capacity and rapid uptake speed of adsorbent. Herein, we report a functionalized double modified covalent organic framework (DMTD-COF-SH) bearing high-density sulfur and nitrogen chelating groups provided simultaneously by 2,5-dimercapto-1,3,4-thiadiazole (DMTD) and 1,2-ethanedithiol, which was prepared via a facile one-pot thiol-ene "click" reaction. PXRD, FTIR, XPS, SEM, BET and ¹³C MAS NMR confirmed their successful graft, and DMTD was found to be more easily grafted on the COF surface layer than 1,2-ethanedithiol. The as-prepared DMTD-COF-SH showed remarkable adsorption capacity and ultrafast uptake dynamics to trace heavy metals owing to the synergistic effects resulting from densely populated sulfur and nitrogen chelating groups within ordered COF mesopores and at the COF surface. On the basis of the drinking water treatment units standard NSF/ANSI 53-2020, when the adsorbent dosage was 10 mg/30 mL and 20 mg L^-1 calcium ions coexisted, the lead concentration decreased from initial 150 μg L^-1 to 2.89 μg L^-1 within 10 s, far below the allowable limit of world health organization (WHO) drinking water standard (10 μg L^-1), and the maximum adsorption capacity meeting the standard attained 14.22 mg g^-1. The adsorbent also exhibited excellent stability, wide applicable pH range and outstanding adsorption performance for coexisting trace lead, mercury, cadmium, chromium (VI) and copper in tap water, indicating that the DMTD-COF-SH material has excellent application prospect for trace heavy metals removal from drinking water.

Preparation of green synthesized copper oxide nanoparticles for efficient removal of lead from wastewaters

Green synthesis is a clean and eco-friendly process in which metal nanoparticles can be produced by the reaction between a metal salt solution and plant organ extract. In the present study, three copper oxide nanoparticles were green synthesized from the leaf extracts of astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus), and mallow (Malva sylvestris) as predominant plant cover in the study area was characterized. The effectiveness of three green synthesized nanoparticles in the adsorption of lead ions from polluted water was studied. According to the results, the removal efficiencies of the copper oxide nanoparticles synthesized from astragalus (A-CuO-NPs), rosemary (R-CuO-NPs), and mallow leaf extract (M-CuO-NPs) especially at the highest initial concentration of lead (1.5 mM), were 88.4%, 84.9%, and 69.6%, respectively. Probably due to the smooth morphology and more uniform configuration of the M-CuO-NPs, the changes between equilibrium adsorption (q_e) and equilibrium concentration (C_e) were more regular than those of the A-CuO-NPs and R-CuO-NPs. Therefore, the best fit of the data to the Langmuir and Freundlich isotherms belonged to the adsorption of lead onto the M-CuO-NPs. According to the results reported herein, the copper oxide nanoparticles synthesized from different plant covers are efficient adsorption agents for lead from wastewaters solution.

Progress in Metal-Organic Frameworks Facilitated Mercury Detection and Removal

Metal Organic Frameworks (MOFs) are noted as exceptional candidates towards the detection and removal of specific analytes. MOFs were reported in particular for the detection/removal of environmental contaminants, such as heavy metal ions, toxic anions, hazardous gases, explosives, etc. Among heavy metal ions, mercury has been noted as a global hazard because of its high toxicity in the elemental (Hg0), divalent cationic (Hg2+), and methyl mercury (CH3Hg+) forms. To secure the environment and living organisms, many countries have imposed stringent regulations to monitor mercury at all costs. Regarding the detection/removal requirements of mercury, researchers have proposed and reported all kinds of MOFs-based luminescent/non-luminescent probes towards mercury. This review provides valuable information about the MOFs which have been engaged in detection and removal of elemental mercury and Hg2+ ions. Moreover, the involved mechanisms or adsorption isotherms related to sensors or removal studies are clarified for the readers. Finally, advantages and limitations of MOFs in mercury detection/removal are described together with future scopes.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

Visible-light-mediated guest trapping in a photosensitizing porous coordination network: metal-free C–C bond-forming modification of metal–organic frameworks for aqueous-phase herbicide adsorption

Metal-free visible-light-mediated C–C bond-forming modification of metal–organic frameworks (MOFs) for aqueous-phase herbicide adsorption.