Upconversion fluorescent aptasensor for bisphenol A and 17β-estradiol based on a nanohybrid composed of black phosphorus and gold, and making use of signal amplification via DNA tetrahedrons

An ultrasensitive dual-mode stagey for 17β-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification

BACKGROUND

The abuse of 17β-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial.

RESULTS

We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM.

SIGNIFICANCE

Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.

Use of All-Male cyp17a1-Deficient Zebrafish (Danio rerio) for Evaluation of Environmental Estrogens

Natural and synthetic environmental estrogens (EEs) are widespread and have received extensive attention. Our previous studies demonstrated that depletion of the cytochrome P450 17a1 gene (cyp17a1) leads to all-testis differentiation phenotype in zebrafish and common carp. In the present study, cyp17a1-deficient zebrafish with defective estrogen biosynthesis were used for the evaluation of EEs, as assessed by monitoring vitellogenin (vtg) expression. A rapid and sensitive assessment procedure was established with the 3-day administration of estradiol (E2), followed by examination of the transcriptional expression of vtgs in our cyp17a1-deficient fish. Compared with the control fish, a higher E2-mediated vtg upregulation observed in cyp17a1-deficient zebrafish exposed to 0.1 μg/L E2 is known to be estrogen receptor-dependent and likely due to impaired in vivo estrogen biosynthesis. The more responsive vtg expression in cyp17a1-deficient zebrafish was observed when exposed to 200 and 2000 μg/L bisphenol A (BPA) and perfluoro-1-octanesulfonate (PFOS). The estrogenic potentials of E2, BPA, and PFOS were compared and assessed by the feminization effect on ovarian differentiation in cyp17a1-deficient zebrafish from 18 to 50 days postfertilization, based on which a higher sensitivity of E2 in ovarian differentiation than BPA and PFOS was concluded. Collectively, through the higher sensitivity to EEs and the capacity to distinguish chemicals with different estrogenic potentials exhibited by the all-male cyp17a1-deficient zebrafish with impaired estrogen biosynthesis, we demonstrated that they can be used as an excellent in vivo model for the evaluation of EEs. Environ Toxicol Chem 2024;43:1062-1074. © 2024 SETAC.

17β-estradiol biosensors based on different bioreceptors and their applications

17β-Estradiol (E2) is a critical sex steroid hormone, which has significant effects on the endocrine systems of both humans and animals. E2 is also believed to play neurotrophic and neuroprotective roles in the brain. Biosensors present a powerful tool to detect E2 because of their small, efficient, and flexible design. Furthermore, Biosensors can quickly and accurately obtain detection results with only a small sampling amount, which greatly meets the detection of the environment, food safety, medicine safety, and human body. This review focuses on previous studies of biosensors for detecting E2 and divides them into non-biometric sensors, enzyme biosensors, antibody biosensors, and aptamer biosensors according to different bioreceptors. The advantages, disadvantages, and design points of various bioreceptors for E2 detection are analyzed and summarized. Additionally, applications of different bioreceptors of E2 detection are presented and highlight the field of environmental monitoring, food and medicine safety, and disease detection in recent years. Finally, the development of E2 detection by biosensor is prospected.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Research Advances in the Analysis of Estrogenic Endocrine Disrupting Compounds in Milk and Dairy Products

Milk and dairy products are sources of exposure to estrogenic endocrine disrupting compounds (e-EDCs). Estrogenic disruptors can accumulate in organisms through the food chain and may negatively affect ecosystems and organisms even at low concentrations. Therefore, the analysis of e-EDCs in dairy products is of practical significance. Continuous efforts have been made to establish effective methods to detect e-EDCs, using convenient sample pretreatments and simple steps. This review aims to summarize the recently reported pretreatment methods for estrogenic disruptors, such as solid-phase extraction (SPE) and liquid phase microextraction (LPME), determination methods including gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), Raman spectroscopy, and biosensors, to provide a reliable theoretical basis and operational method for e-EDC analysis in the future.

Electrochemical aptasensor based on electrodeposited poly(3,4-ethylenedioxythiophene)-graphene oxide coupled with Au@Pt nanocrystals for the detection of 17β-estradiol

An electrochemical aptasensor is reported for the sensitive and specific monitoring of 17β-estradiol (E2) based on the modification of electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT)-graphene oxide (GO) coupled with Au@Pt nanocrystals (Au@Pt). With excellent conductivity, chemical stability and active sites, the PEDOT-GO nanocomposite film was firstly in situ polymerized on the glassy carbon electrode by cyclic voltammetry. Subsequently, one-step synthesized Au@Pt were decorated on the conductive polymer, providing a platform for immobilizing the aptamer and enhancing the detecting sensitivity. With the addition of E2, since the interfacial electron transfer process was retarded by the E2-aptamer complex, the differential pulse voltammetry signal decreased gradually. Under optimum conditions, the calibration curve of E2 exhibited a linear range between 0.1 pM and 1 nM, with a low detection limit (S/N = 3) of 0.08 pM. The developed aptasensor showed admiring selectivity, stability, and reproducibility. It was tested in human serum, lake water and tap water samples after low-cost and simple pretreatment. Consequently, the developed platform could provide a new design thought for ultrasensitive detection of E2 in clinical and environmental samples.

NIR persistent luminescence nanoparticles based turn-on aptasensor for autofluorescence-free determination of 17β-estradiol in milk

Consistent exposure to 17β-estradiol through drinking water and food can cause health problems. Although many simple and sensitive fluorescence sensors of 17β-estradiol have been reported, most of them are based on fluorescence quenching test mode working in visible light range, which are inferior in anti-interference ability and quantitative range. Here, we developed a near-infrared (NIR) phosphorescence aptasensor for the detection of 17β-estradiol that has no background fluorescence. The aptasensor was based on Foster resonance energy transfer (FRET) between aptamer conjugated NIR persistent luminescence nanoparticles (PLNPs-Apt) and MoS₂ nanosheets. The 17β-estradiol was quantified by the recovery of PLNPs' phosphorescence. This assay can detect 17β-estradiol in 0.5 mL samples with the LOD of 0.29 ng mL^-1 and in concentrations of more than three orders of magnitude (from 0.5 ng mL^-1 to 1.2 μg mL^-1). This aptasensor exhibited selectivity for 17β-estradiol and was applicable in complex milk samples.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Biosensing based on upconversion nanoparticles for food quality and safety applications

Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.

A fluorescent aptasensor based on berberine for ultrasensitive detection of bisphenol A in tap water

The residues of bisphenol A (BPA) in food packaging and water systems have a potential impact on human health; therefore, its analysis and detection have drawn scientists' attention. In this work, based on the change in fluorescence intensity resulting from the conformational switch of a berberine/BPA-aptamer system in the presence and absence of BPA, an ultra-sensitive fluorescence aptasensing system is proposed, in which BPA-aptamer is employed as the identification unit and berberine as the fluorescent probe. Various factors affecting the detection of BPA, including the concentration of the fluorescent probe, BPA-aptamer, BPA, pH, system stability time and other experimental conditions, were investigated in detail. Under the optimal experimental conditions, the fluorescence intensity of the sensing system of berberine/BPA-aptamer exhibited a good linear correlation with the BPA concentration in the range of 0-1300 μM with a LOD of 32 nM. The proposed fluorescent sensing system also exhibited excellent recoveries of 92.4-102.3% in tap water samples and showed good application prospects for the analysis and detection of BPA.

Development of a fast and ultrasensitive black phosphorus-based colorimetric/photothermal dual-readout immunochromatography for determination of norfloxacin in tap water and river water

A rapid and ultrasensitive method for colourimetric/photothermal dual-readout detection was developed using an 808 nm NIR laser and a thermal imaging app on mobile phone. Norfloxacin was used as a model contaminant to demonstrate this universal rapid detection method. It is innovatively, to use the advanced two-dimensional material black phosphorus as a colourimetric/photothermal reagent for the first time. The samples were added to the strip, and the analytes were selectively captured on the conjugate pad by monoclonal antibody-modified magnetic/upconversion nanocomposites. The samples flowed through the strips by capillary action until reaching the control line, where immune complex formation occurred due to the presence of secondary antibody. The added black phosphorus could be captured by the the antigens which were directly exposed to the test line and a brown band could be observed by naked eye. Upon illumination by NIR light for 1 min, the real-time temperature is obtained for quantitative analysis through the thermal imaging performed by mobile phone camera. This method can achieve the detection of norfloxacin in water samples within 20 min, and the detection limits of colorimetric and photothermal readout can reach 45 pg mL^-1. Compared with conventional strips, this method provided an increased sensitivity by about two orders of magnitude, with a integrated portable laser and a mobile phone. It is a valuable method for rapid detection and can be applied to other environmental contaminants as well.

DNA functionalized metal and metal oxide nanoparticles: principles and recent advances in food safety detection

The frequent occurrence of food safety incidents has given rise to unprecedented concern about food contamination issues for both consumers and the industry. Various contaminations in food pose serious threats to food safety and human health. Many detection methods were studied to address the challenge. Recently, biosensors relying on deoxyribonucleic acid (DNA)-functionalized nanoparticles have been developed as an efficient and effective detection method. In the current review, the strategies for DNA assembly metal and metal oxide nanoparticles are elaborated, recent applications of the sensors based on DNA-functionalized nanoparticles in food contaminant detection are discussed. Pathogenic bacteria, heavy metal ions, mycotoxins, antibiotics, and pesticides are covered as food contaminants. Additionally, limitations and future trends of functionalized nanoparticles-based technology are also presented. The current review indicates that DNA-functionalized metal and metal oxide nanoparticles are a novel nanomaterial with unique biological and physical properties for developing electrochemical, fluorescent, colourimetric and surface-enhanced Raman spectroscopy (SERS) sensors, etc. Compared with conventional detection techniques, DNA-functionalized metal and metal oxide nanoparticles have considerable advantages with high accuracy, high specificity, micro-intelligence, and low cost. Nevertheless, the stability of these sensors and the limitations of real-time detection are still under discussion. Therefore, more tolerant, portable, and rapid DNA sensors should be developed to better the real-time monitoring of harmful contaminants.

Voltammetric aptasensor for bisphenol A based on double signal amplification via gold-coated multiwalled carbon nanotubes and an ssDNA-dye complex

An aptasensor is described for the electrochemical determination of bisphenol A (BPA). Gold-coated multiwalled carbon nanotubes (Au/MWCNTs) and a single-stranded DNA-dye complex are used as a double signal-amplification system. The BPA-binding aptamer was assembled on a disposable electrode modified with Au/MWCNTs. Methylene blue (MB) was then intercalated into the immobilized aptamer with an approximately molecular ratio of 4 to form a complex. Upon interaction with BPA, the immobilized aptamer underwent a conformational change. This causes the intercalated MB to be released from the complex into solution. As a result, the electrochemical signal of the intercalated MB, typically measured using square wave voltammetry at a potential of -0.20 V (vs. Ag/AgCl (saturated KCl)) decreases. The fabrication of the aptasensor was characterized by the scanning electron microscopy, atomic force microscopy, and electrochemical techniques. Under optimal experimental conditions, the current drops linearly with the logarithm of BPA concentrations over the range from 10 fM to 1 nM, and the limit of detection is 8 fM. The assay was applied to the determination of BPA in plastic drinking bottles, tap water, and milk. Graphical AbstractSchematic illustration of fabricating the aptasensor for bisphenol A (BPA) based on double signal amplification via gold-coated multiwalled carbon nanotubes (Au/MWCNT) and an aptamer-dye complex. PET: poly(ethylene terephthalate).