Magnetic nanocomposite-based SELDI probe for extraction and detection of drugs, amino acids and fatty acids

Design and Application of Microfluidic Capture Device for Physical-Magnetic Isolation of MCF-7 Circulating Tumor Cells

Circulating tumor cells (CTCs) are a type of cancer cell that spreads from the main tumor to the bloodstream, and they are often the most important among the various entities that can be isolated from the blood. For the diagnosis of cancer, conventional biopsies are often invasive and unreliable, whereas a liquid biopsy, which isolates the affected item from blood or lymph fluid, is a less invasive and effective diagnostic technique. Microfluidic technologies offer a suitable channel for conducting liquid biopsies, and this technology is utilized to extract CTCs in a microfluidic chip by physical and bio-affinity-based techniques. This effort uses functionalized magnetic nanoparticles (MNPs) in a unique microfluidic chip to collect CTCs using a hybrid (physical and bio-affinity-based/guided magnetic) capturing approach with a high capture rate. Accordingly, folic acid-functionalized Fe3O4 nanoparticles have been used to capture MCF-7 (breast cancer) CTCs with capture efficiencies reaching up to 95% at a 10 µL/min flow rate. Moreover, studies have been conducted to support this claim, including simulation and biomimetic investigations.

Implications of analytical nanoscience in pharmaceutical and biomedical fields: A critical view

This review summarizes recent progress performed in the design and application of analytical tools and methodologies using nanomaterials for pharmaceutical analysis, and specifically new nanomedicines at distinct phases of development and translation from preclinical to clinical stages. Over the last 10-15 years, a growing number of studies have utilized various nanomaterials, including carbon-based, metallic nanoparticles, polymeric nanomaterials, materials based on biological molecules, and composite nanomaterials as tools for improving the analysis of pharmaceutical products. New and more complex nanomaterials are currently being explored to influence different stages of the analytical process. These materials provide unique properties to support the extraction of analytes in complex samples, increase the selectivity and efficiency of chromatographic separations, and improve the analytical properties of many sensor applications. Indeed, nanomaterials, including electrochemical detection approaches and biosensing, are expanding at a remarkable rate. Furthermore, the analytical performance of numerous approaches to determine drugs in different matrices can be significantly improved in terms of precision, detection limits, selectivity, and time of analysis. However, the quality control and metrological characterization of the currently synthesized nanomaterials still depend on the development of new and improved analytical methodologies, and the application of specific and improved instrumentation. Therefore, there is still much to explore about the properties of nanomaterials which need to be determined even more precisely and accurately.

Advances in surface design and biomedical applications of magnetic nanoparticles

Despite significant efforts by scientists in the development of advanced nanotechnology materials for smart diagnosis devices and drug delivery systems, the success of clinical trials remains largely elusive. In order to address this biomedical challenge, magnetic nanoparticles (MNPs) have gained attention as a promising candidate due to their theranostic properties, which allow the simultaneous treatment and diagnosis of a disease. Moreover, MNPs have advantageous characteristics such as a larger surface area, high surface-to-volume ratio, enhanced mobility, mass transference and, more notably, easy manipulation under external magnetic fields. Besides, certain magnetic particle types based on the magnetite (Fe3O4) phase have already been FDA-approved, demonstrating biocompatible and low toxicity. Typically, surface modification and/or functional group conjugation are required to prevent oxidation and particle aggregation. A wide range of inorganic and organic molecules have been utilized to coat the surface of MNPs, including surfactants, antibodies, synthetic and natural polymers, silica, metals, and various other substances. Furthermore, various strategies have been developed for the synthesis and surface functionalization of MNPs to enhance their colloidal stability, biocompatibility, good response to an external magnetic field, etc. Both uncoated MNPs and those coated with inorganic and organic compounds exhibit versatility, making them suitable for a range of applications such as drug delivery systems (DDS), magnetic hyperthermia, fluorescent biological labels, biodetection and magnetic resonance imaging (MRI). Thus, this review provides an update of recently published MNPs works, providing a current discussion regarding their strategies of synthesis and surface modifications, biomedical applications, and perspectives.

Fenton-like Degradation of Methylene Blue on Attapulgite Clay Composite by Loading of Iron-Oxide: Eco-Friendly Preparation and Its Catalytic Activity

The continuous discharge of organic dyes into freshwater resources poses a long-term hazard to aquatic life. The advanced oxidation Fenton process is a combo of adsorption and degradation of pollutants to detoxify toxic effluents, such as anti-bacterial drugs, antibiotics, and organic dyes. In this work, an activated attapulgite clay-loaded iron-oxide (A-ATP@Fe3O4) was produced using a two-step reaction, in which attapulgite serves as an enrichment matrix and Fe3O4 functions as the active degrading component. The maximum adsorption capacity (qt) was determined by assessing the effect of temperature, pH H2O2, and adsorbent. The results showed that the A-ATP@Fe3O4 achieves the highest removal rate of 99.6% under optimum conditions: 40 °C, pH = 3, H2O2 25 mM, and 0.1 g dosage of the composite. The dye removal procedure achieved adsorption and degradation equilibrium in 120 and 30 min, respectively, by following the same processes as the advanced oxidation approach. Catalytic activity, kinetics, and specified surface characteristics suggest that A-ATP@Fe3O4 is one of the most promising candidates for advanced oxidation-enrooted removal of organic dyes.

Cell Penetrability of a γ-Crystallin Peptide Fragment from the Discarded Cataractous Eye Emulsion

The efficiency of the intracellular transport of medication and target specificity is frequently hampered by biological obstacles. The potential for therapeutic use of peptide fragments from naturally occurring proteins is promising, as peptides exhibit high selectivity due to several possibilities of interaction with their target. Certain peptide sequences, often referred to as cell-penetrating peptides (CPPs), are those that can penetrate cell membranes. Our goal is to find these sequences in the discarded postcataractery surgery emulsion known as the cataractous eye protein isolate (CEPI). One peptide fragment from this discarded protein has been identified to be a potential CPP based on the similarities with other well-known CPPs. Cell membrane penetrability and cytotoxicity of the peptide have been investigated. Fibroblast cells were incubated with the fluorescently labeled peptide and were observed under fluorescence as well as under confocal microscopy. It was found that the peptide possesses a cell-penetrating ability.

Magnetic Hydrogel Beads as a Reusable Adsorbent for Highly Efficient and Rapid Removal of Aluminum: Characterization, Response Surface Methodology Optimization, and Evaluation of Isotherms, Kinetics, and Thermodynamic Studies

Biopolymers such as alginate and gelatin have attracted much attention because of their exceptional adsorption properties and biocompatibility. The magnetic hydrogel beads produced and used in this study had a core structure composed of magnetite nanoparticles and gelatin and a shell structure composed of alginate. The combination of the metal-ion binding ability of alginate and the mechanical strength of gelatin in magnetic hydrogel beads presents a new approach for the removal of metal from water sources. The beads were designed for aluminum removal and fully characterized using various methods, including Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, microcomputed tomography, and dynamic mechanical analysis. Statistical experimental designs were employed to optimize the parameters of the adsorption and recovery processes. Plackett-Burman Design, Box-Behnken Design, and Central Composite Design were used for identifying the significant factors and optimizing the parameters of the adsorption and recovery processes, respectively. The optimum parameters determined for adsorption are as follows: pH: 4, contact time: 30 min, adsorbent amount: 600 mg; recovery time: reagent 1 M HNO3; and contact time: 40 min. The adsorption process was described by using the Langmuir isotherm model. It reveals a homogeneous bead surface and monolayer adsorption with an adsorption capacity of 5.25 mg g-1. Limit of detection and limit of quantification values were calculated as 4.3 and 14 μg L-1, respectively. The adsorption process was described by a pseudo-second-order kinetic model, which assumes that chemisorption is the rate-controlling mechanism. Thermodynamic studies indicate that adsorption is spontaneous and endothermic. The adsorbent was reusable for 10 successive adsorption-desorption cycles with a quantitative adsorption of 98.2% ± 0.3% and a recovery of 99.4% ± 2.6%. The minimum adsorbent dose was determined as 30 g L-1 to achieve quantitative adsorption of aluminum. The effects of the inorganic ions were also investigated. The proposed method was applied to tap water and carboy water samples, and the results indicate that magnetic hydrogel beads can be an effective and reusable bioadsorbent for the detection and removal of aluminum in water samples. The recovery values obtained by using the developed method were quantitative and consistent with the results obtained from the inductively coupled plasma optical emission spectrometer.

Tuning of electron transport layers using MXene/metal-oxide nanocomposites for perovskite solar cells and X-ray detectors

This work elaborates on the decoration of metal oxides (ZnO and Fe₃O₄) between MXene sheets for use as the supporting geometry of PCBM electron transport layers (ETLs) in perovskite solar cells and X-ray detectors. The metal oxide supports for carrying the plentiful charge carriers and the hydrophobic nature of MXenes provide an easy charge transfer path through their flakes and a smooth surface for the ETL. The developed interface engineering based on the MXene/ZnO and MXene/Fe₃O₄ hybrid ETL results in improved power conversion efficiencies (PCEs) of 13.31% and 13.79%, respectively. The observed PCE is improved to 25.80% and 30.34% by blending the MXene/ZnO and MXene/Fe₃O₄ nanoparticles with the PCBM layer, respectively. Various factors, such as surface modification, swift interfacial interaction, roughness decrement, and charge transport improvement, are strongly influenced to improve the device performance. Moreover, X-ray detectors with the MXene/Fe₃O₄-modulated PCBM ETL achieve a CCD-DCD, sensitivity, mobility, and trap density of 15.46 μA cm^-2, 4.63 mA per Gy per cm², 5.21 × 10^-4 cm² V^-1 s^-1, and 1.47 × 10¹⁵ cm² V^-1 s^-1, respectively. Metal oxide-decorated MXene sheets incorporating the PCBM ETL are a significant route for improving the photoactive species generation, long-term stability, and high mobility of perovskite-based devices.

Chitosan based titanium and iron oxide hybrid bio-polymeric nanocomposites as potential corrosion inhibitor for mild steel in acidic medium

Biopolymer chitosan (CS), chitosan grafted acrylamide based titanium dioxide (CS-g-PAM/TiO₂) and magnetite (CS-g-PAM/Fe₃O₄) hybrid nanocomposites have been synthesized through free radical graft co-polymerization and successfully validated as corrosion inhibitors for mild steel in 15 % HCl solution. The synthesized compounds have been characterized through FTIR, APC, XRD and TEM. The thermal stability of the nanocomposites was established by TGA. The anticorrosive performance was determined through gravimetric measurements and by electrochemical study. According to EIS technique it was observed that CS-g-PAM/TiO₂ and CS-g-PAM/Fe₃O₄ showed maximum 97.19 % and 95.49 % efficiency respectively. Langmuir adsorption isotherm is obeyed in each case. The activation and adsorption parameters have been determined from isotherm study. FESEM and AFM confirmed better adsorption layer formed by composites over mild steel surface. The elemental composition of the metal samples was proved by the XPS investigation. DFT and ANOVA test further corroborates the experimental results.

Colorimetric assay for the detection of dopamine using bismuth ferrite oxide (Bi2Fe4O9) nanoparticles as an efficient peroxidase-mimic nanozyme

This work describes the preparation of ternary bismuth ferrite oxide nanoparticles (Bi₂Fe₄O₉ NPs) with an enzyme mimetic activity for dopamine (DA) qualitative and quantitative detection. Bi₂Fe₄O₉ NPs were prepared using a facile, low cost, and one-pot hydrothermal treatment. The chemical composition, morphology, and optical properties of Bi₂Fe₄O₉ nanozyme were characterized using different techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction pattern (XRD), X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA), dynamic light scattering (DLS), field-emission scanning electron microscopy (FESEM) imaging, FESEM-energy dispersive X-ray spectroscopy (EDS), UV-vis absorption, and fluorescence emission spectroscopy. Bi₂Fe₄O₉ NPs were utilized to catalyze the oxidation of a typical chromogenic peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), to form the blue-colored oxidized product (oxTMB), in the presence of hydrogen peroxide (H₂O₂). All reactions occurred in acetate buffer solution (pH 3.5) to generate hydroxyl radicals (^•OH) and the kinetics were followed by UV-vis absorbance at 654 nm. The steady-state kinetic parameters were obtained from the Michaelis-Menten equation and exhibited a good catalytic efficiency of Bi₂Fe₄O₉ NPs as enzyme mimetics. Michaelis-Menten constant (K_m) values were estimated as 0.07 and 0.73 mM for TMB and H₂O₂, respectively. The presented method is efficient, rapid, cost-effective, and sensitive for the colorimetric detection of dopamine with a linear range (LR) from 0.15 to 50 μM and a detection limit (LOD) of 51 nM. The proposed colorimetric sensor was successfully applied for the detection of different concentrations of dopamine in spiked fetal bovine serum (FBS) and horse serum (HS) samples. It is anticipated that Bi₂Fe₄O₉ nanozyme holds great potential in biomedical analysis and diagnostic applications of dopamine-related diseases.

Development of efficient SALDI substrate based on Au-TiO2 nanohybrids for environmental and forensic detection of dyes and NSAIDs

Herein, a matrix-free approach is presented for comprehensive environmental and forensic analysis of dyes and nonsteroidal anti-inflammatory drugs (NSAIDs) using Au-TiO₂ nanohybrids coupled with surface-assisted pulsed laser desorption ionization-mass spectrometry (SALDI-MS). The Au-TiO₂ nanohybrids was prepared and characterized using inductively coupled plasma-optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), surface area measurements, ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS). Initially, the optimal Au content was assessed using the survival yield (SY) method, confirming that 7.5% Au content on the TiO₂ surface offered the highest ionization efficiency. Subsequently, environmental analyses of dyes and NSAIDs in water samples were performed, and sensitive detection of all analytes was achieved with limits of detection (LODs) ranging from 10.0 ng mL^-1 to 10.0 fg mL^-1 and good spot-to-spot reproducibility. Additionally, the effect of potential contaminants commonly found in environmental samples, such as salts, surfactants and pesticides was also considered. Despite signal intensity reduction at high concentrations of some salts, the target analytes were detected, while the presence of surfactants and pesticides did not cause significant signal intensity reduction. Additionally, dyed and undyed Tetoron fibers and the effect of adhesive tape were evaluated. Direct analysis of the dyed Tetoron fibers on the target plate, using the nanohybrids, enabled higher detection sensitivity of the dyes, in addition to adducts of polystyrene and cellulose, the main components of the fiber. Finally, NSAIDs in oral fluid were analyzed and sensitive detection of the analytes was observed using the nanohybrids with LODs and LOQs in the range of 0.1-10 ng mL^-1 and 1-20 ng mL^-1, respectively. The trueness of the exact mass was in the range of 0.64-6.2 ppm while the recovery of the spiked samples was in the range of 82.90-107.54%% indicating the efficiency of the Au-TiO₂ nanohybrids as SALDI substrate. Thus, the Au-TiO₂ nanohybrids hold considerable promise in terms of sensitivity, reproducibility, and LOD, and may significantly contribute to environmental and forensic identification.

Hydrolytically stable citrate capped Fe3O4@UiO-66-NH2 MOF: A hetero-structure composite with enhanced activity towards Cr (VI) adsorption and photocatalytic H2 evolution

Design and facile fabrication of a magnetically separable hetero-structure photocatalyst as well as an adsorbent having dual green benefits towards energy conversion and pollutant remediation are quite indispensable in the current scenario. In this regard, a composite of citrate capped Fe₃O₄ and UiO-66-NH₂ has been designed to remediate Cr (VI) by adsorption and harvest photons from visible light for clean energy (H₂) conversion. The material was prepared by the union of citrate capped Fe₃O₄ (CCM) and versatile aqueous stable Zr-based MOF (UiO-66-NH₂) through in-situ solvothermal method. The composite of CCM with MOF (MU-2) was studied through sophisticated analysis techniques; PXRD, FT-IR, BET, UV-Visible DRS, PL, TG, HRTEM and XPS etc. to reveal the inherent characteristics of the material. BET surface analysis revealed high specific surface area (572.13 m² g^-1) of MU-2 in comparison to its pristine MOF. Furthermore, the dual function composite MU-2's VSM studies showed that its magnetic saturation is 3.07 emu g^-1 that is suitable for magnetic separation after desired reaction from aqueous media. The Cr (VI) sorption studies revealed that the composite adsorbent (MU-2) showed maximum monolayer adsorption capacity (Q_m) of 743 mg g^-1 which followed pseudo second order kinetics. Moreover, the sorption thermodynamics revealed that the process was spontaneous and endothermic in nature. In addition to it, the synthesized composite material displayed enhanced activity towards photocatalytic H₂ evolution with a maximum evolution rate of 417 µmole h^-1 with an apparent conversion efficiency (ACE) of 3.12 %. Typically, MU-2 displays high adsorptions of Cr (VI) as well as some extent of Cr (VI) reduction owning to its populous active sites and free carboxylate groups respectively. Moreover, the synergistic effect of CCM and UNH in the composite resulted in Z scheme mediated charge transfer mechanism that showed enhanced H₂ photo-evolution rates. Hence, MU-2 can be readily utilized as magnetically retrievable dual function composite for Cr (VI) adsorption and photocatalytic H₂ evolution.