Polyaniline@Au organic-inorganic nanohybrids with thermometer readout for photothermal immunoassay of tumor marker

Rapid photothermal assay for ultrasensitive point-of-care detection of tumor markers based on a filter membrane

An ultrasensitive photothermal assay was designed for point-of-care testing (POCT) of tumor markers based on a filter membrane. Firstly, Cu2-xSe was successfully encapsulated in liposome spheres with biotin on the surface and connected to carcinoembryonic antigen (CEA) aptamer with 3'end modified biotin by streptavidin. Secondly, the CEA antibody was successfully modified on the surface of the nitrocellulose membrane through simple incubation. Finally, the assay process was completed using a disposable syringe, and the temperature was recorded using a handheld infrared temperature detector. In the range 0-50 ng mL-1, the temperature change of the nitrocellulose membrane has a strong linear relationship with CEA concentration, and the detection limit is 0.097 ng mL-1. It is worth noting that the entire testing process can be easily performed in 10 min, much shorter than traditional clinical methods. In addition, this method was successfully applied to the quantitative determination of CEA levels in human serum samples with a recovery of 96.2-103.3%. This rapid assay can be performed by "one suction and one push" through a disposable syringe, which is simple to operate, and the excellent sensitivity reveals the great potential of the proposed strategy in the POCT of tumor biomarkers.

Multifunctional polyaniline modified calcium alginate aerogel membrane with antibacterial, oil-water separation, dye and heavy metal ions removal properties for complex water purification

With the rapid development of urbanization, the discharge of industrial wastewater has led to increasingly critical water pollution issues. Additionally, heavy metals, organic dyes, microorganisms and oil pollution often coexist and have persistence and harmfulness. Developing materials that can treat these complex pollutants simultaneously has important practical significance. In this study, a calcium alginate-based aerogel membrane (PANI@CA membrane) was prepared by spraying, polymerization, Ca2+ cross-linking and freeze-drying using aniline and sodium alginate as raw materials. Oil-water emulsion can be separated by PANI@CA membrane only under gravity, and the separation efficiency was as high as 99 %. At the same time, the membrane can effectively intercept or adsorb organic dyes and heavy metal ions. The removal rates of methylene blue and Congo red were above 92 % and 63 % respectively even after ten times of cyclic filtration. The removal rate of Pb2+ was up to 95 %. In addition, PANI@CA membrane shows excellent photothermal conversion ability, and it can effectively kill Staphylococcus aureus under 808 nm laser irradiation. PANI@CA membrane has the advantages of low cost, simple preparation, good stability and high recycling ability, and has potential application prospects in wastewater treatment.

Isoniazide modified Ag nanoparticles triggered photothermal immunoassay for carcinoembryonic antigen detection

As the most well-known analytical tool, the thermometer has been extended to the field of biological analysis based on the photothermal effect. Herein, isoniazide modified Ag nanoparticles were prepared as nanolabels to build an immunoassay. The nanoparticles were characterized by transmission electron microscope (TEM), dynamic laser scattering (DLS), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR). When the target protein was present, the sandwich immunoassay was developed and the photothermal reaction was triggered by isoniazide modified Ag nanoparticles. As a reducing agent, isoniazide is used to transform phosphomolybdic acid hydrate into molybdenum blue solution. And molybdenum blue had good photothermal stability and high photothermal conversion efficiency. The temperature variation of molybdenum blue solution showed a positive correlation with the concentration of carcinoembryonic antigen (CEA). Thus, the target protein of CEA was quantitative detection by thermometer. The linear response range is 0.1 ng mL-1 to 40 ng mL-1, and the detection limit is 0.08 ng mL-1. Moreover, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility.

Building a Nucleic Acid Nanostructure with DNA-Epitope Conjugates for a Versatile Approach to Electrochemical Protein Detection

The recent surge of effort in nucleic-acid-based electrochemical (EC) sensors has been fruitful, yet there remains a need for more generalizable EC platforms for sensing multiple classes of clinically relevant targets. We recently reported a nucleic acid nanostructure for simple, economical, and more generalizable EC readout of a range of analytes, including small molecules, peptides, proteins, and antibodies. The nanostructure is built through on-electrode enzymatic ligation of three oligonucleotides for attachment, binding, and signaling. However, the generalizable detection of larger proteins remains a challenge. Here, we adapted the sensor to quantify larger proteins in a more generic manner through conjugating the protein's minimized antibody-binding epitope to the central DNA strand. This concept was verified using creatine kinase (CK-MM), a biomarker of muscle damage and several disorders for which rapid clinical sensing is important. DNA-epitope conjugates permitted a competitive immunoassay for the CK protein at the electrode via square-wave voltammetry (SWV). Sensing through a signal-off mechanism, the anti-CK antibody limit of detection (LOD) was 5 nM with a response time as low as 3 min. Antibody displacement by native protein analytes gave a signal-on response with the CK sensing range from the LOD of 14 nM up to 100 nM, overlapping with the normal (nonelevated) human clinical range (3-37 nM), and the sensor was validated in 98% human serum. While a need for improved DNA-epitope conjugate purification was identified, overall, this approach allows the quantification of a generic protein- or peptide-binding antibody and should facilitate future quantitative EC readouts of clinically relevant proteins that were previously inaccessible to EC techniques.

Fluorescence Thermometers Involving Two Ranges of Temperature: Coordination Polymer and DMSP Embedding

The measurement of temperature is indispensable in the fields of life, science, and industry. Fluorescence thermometers are attractive to researchers because of their advantages such as noncontact, high sensitivity, fast response, and excellent anti-interference. Here, a new coordination polymer (HNU-76) was synthesized by assembling Zn2+ with the H3TCA ligand, a fluorescent molecule with an AIE behavior, which can be used as a fluorescence thermometer. At 100-210 K, the fluorescence intensity ratio of HNU-76 versus temperature conforms to an Arrhenius-type decay relationship (R2 = 0.997), which can be the candidate for low-temperature sensing. In order to increase the sensing range, 4-[4-(dimethylamino)styryl] pyndine (DMSP) was successfully embedded on HNU-76, obtaining HNU-76⊃DMSP. The fluorescence intensity of HNU-76⊃DMSP conforms to an Arrhenius-type decay relationship (R2 = 0.997) at 270-360 K versus temperature. HNU-76 can be used for fluorescence detection at low temperatures, due to the DMSP loading, and HNU-76⊃DMSP can serve as the temperature thermometer in a range of temperatures common. Both materials show good cyclability and have the potential to be used in fluorescence thermometers.

Biosensing Intestinal Alkaline Phosphatase by Pregnancy Test Strips Based on Target-Triggered CRISPR-Cas12a Activity to Monitor Intestinal Inflammation

With an increasing incidence worldwide, inflammatory bowel disease (IBD) is a chronic inflammatory disease affecting the gastrointestinal tract, which impairs the life quality of patients. Therefore, it is of great significance to construct a sensitive, simple, and convenient biosensor to analyze IBD-associated biomarkers for an auxiliary diagnosis of IBD. Intestinal alkaline phosphatase (IAP), expressed by the intestinal epithelium, is an endogenous protein that is thought to play a vital role in maintaining intestinal homeostasis and is considered a potential biomarker for IBD. Here, an IAP detection method was developed using pregnancy test strips by dephosphorylation. Initially, a double-stranded DNA (dsDNA) was designed to respond to IAP and acted as an activator of Cas12a. In the presence of IAP, the designed dsDNA was not digested by lambda exonuclease (λ exo), which hybridized to the Cas12a-crRNA duplex and resulted in the activation of the trans-cleavage of Cas12a. Further, the activated Cas12a cleaved the single-strand DNA (ssDNA) linker in the MBs-ssDNA-hCG probe, triggering the release of hCG. With magnetic separation, the released hCG could be quantitatively detected by pregnancy test strips. IAP levels were analyzed in feces from colitis and healthy mice by pregnancy test strips. The results showed that the IAP level of colitis mice (3.89 ± 1.92 U/L) was much lower than that of healthy mice (39.64 ± 24.93 U/L), indicating the correlation between IAP and intestinal inflammation. Taken together, a sensitive, user-friendly detection assay based on pregnancy test strips was constructed to monitor IAP and used as an auxiliary diagnostic approach for IBD in a clinical scene.

Organic Photothermal Cocrystals: Rational Design, Controlled Synthesis, and Advanced Application

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality.

A peroxidase-like magneto-gold nanozyme AuNC@Fe3O4 with photothermal effect for induced cell apoptosis of hepatocellular carcinoma cells in vitro

Hepatocellular carcinoma (HCC) is one of the most commonly diagnosed and malignant cancers worldwide. Conventional therapy strategies may not completely eradicate the tumor and may cause side effects during treatment. Nano-catalytic therapy, as a novel strategy, has attracted a great deal of attention. This study aimed to synthesize a multifunctional magneto-gold nanozyme AuNC@Fe₃O₄ and evaluate its anti-cancer potential in HepG2 cells in vitro. The characteristics of AuNC@Fe₃O₄ were assessed using a transmission electron microscope, dynamic light scattering, and energy-dispersive X-ray. The photothermal performance and peroxidase (POD)-like activity of AuNC@Fe₃O₄ were detected, using thermal camera and ultraviolet-visible spectrophotometer, respectively. The anti-cancer potential of AuNC@Fe₃O₄ was examined using cell counting kit-8, live/dead cell staining, and apoptosis analysis. Further research on HepG2 cells included the detection of intracellular reactive oxygen species (ROS) and lysosomal impairment. We observed that the AuNC@Fe₃O₄ had a small size, good photothermal conversion efficiency and high POD-like activity, and also inhibited cell proliferation and enhanced cell apoptotic ability in HepG2 cells. Furthermore, the AuNC@Fe₃O₄ enhanced ROS production and lysosomal impairment via the synergistic effect of photothermal and nano-catalytic therapies, which induced cell death or apoptosis. Thus, the magneto-gold nanozyme AuNC@Fe₃O₄ may offer a potential anti-cancer strategy for HCC.

Dual-mode immunoassay for diethylstilbestrol based on peroxidase activity and photothermal effect of black phosphorus-gold nanoparticle nanohybrids

Nanozyme-mediated 3,3',5,5'-tetramethylbenzidine (TMB) - H₂O₂ systems have spawned the establishment of multiple colorimetric sensing platforms that are effective but sometimes subject to low sensitivity. Taking temperature as the output signal, photothermal effects lead to new strategies for sensitive detection. In this paper, a colorimetric and photothermal dual-mode immunoassay for diethylstilbestrol (DES) was constructed. It is based on the oxidation reaction of TMB catalyzed by black phosphorus-gold nanoparticle (BP/Au) nanohybrids, and the kinetics as well as catalytic mechanism of the nanohybrids were investigated in detail for the first time. Herein, the nanohybrids playcatalytic and photothermal dual roles. Moreover, the one-electron oxidation product of TMB (oxidized TMB) not only acts as chromogenic agent but also an excellent NIR laser-driven photothermal agent. The temperature (ΔT/°C) was gauged by a portable digital thermometer. Through an indirect competition strategy, a simple, sensitive, and economic immunosensor was proposed. Higher DES content in the sample correlated with less BP/Au nanohybrids conjugated to the surface of ELISA microplate, a weaker color change, and a lower temperature variation when exposed to laser irradiation. This method was applied for DES determination in real samples with gratifying recovery rates, showing great promise in food safety inspection applications.

Free-standing electrochemical biosensor for carcinoembryonic antigen detection based on highly stable and flexible conducting polypyrrole nanocomposite

A flexible free-standing electrochemical biosensor to detect carcinoembryonic antigen (CEA) is described based on a conducting polypyrrole (PPy) nanocomposite film electrode. The conducting PPy composite was constructed by the sandwiched structure formed by PPy doped with pentaerythritol ethoxylate (PEE) and 2-naphthalene sulfonate (2-NS-PPy) separately via electropolymerization. Gold nanoparticles (AuNPs) were fixed on the PPy composite film by electrodeposition and then connected to CEA aptamer through self-assembly to construct a free-standing electrochemical biosensor breaking away from additional soft substrates and current collector. This PPy composite film-based electrochemical biosensor exhibits satisfying sensing performance for CEA detection, with a linear range from 10^-10 g/mL to 10^-6 g/mL and a detection limit of 0.033 ng/mL, good specificity and long-term sensing stability (96.8% of the original signal after 15 days). The biosensor also presents acceptable reproducibility with 1.7% relative standard deviation. Moreover, this electrochemical biosensor owns the deformation stability that could bear various deformations (twisting, folding, and knotting) without affecting device's sensing performance. It can even maintain 99.4% of the original signal under 25% strain deformation. Due to the superior sensing performance, high stability (mechanical deformation and long-term storage), and flexibility, this free-standing electrochemical biosensor proves huge potential in application of flexible and wearable electronics.