Dynamic morphologies of pollen plastids visualised by vegetative-specific FtsZ1-GFP in Arabidopsis thaliana

Visualizing the dynamics of plant energy organelles

Plant organelles predominantly rely on the actin cytoskeleton and the myosin motors for long-distance trafficking, while using microtubules and the kinesin motors mostly for short-range movement. The distribution and motility of organelles in the plant cell are fundamentally important to robust plant growth and defense. Chloroplasts, mitochondria, and peroxisomes are essential organelles in plants that function independently and coordinately during energy metabolism and other key metabolic processes. In response to developmental and environmental stimuli, these energy organelles modulate their metabolism, morphology, abundance, distribution and motility in the cell to meet the need of the plant. Consistent with their metabolic links in processes like photorespiration and fatty acid mobilization is the frequently observed inter-organellar physical interaction, sometimes through organelle membranous protrusions. The development of various organelle-specific fluorescent protein tags has allowed the simultaneous visualization of organelle movement in living plant cells by confocal microscopy. These energy organelles display an array of morphology and movement patterns and redistribute within the cell in response to changes such as varying light conditions, temperature fluctuations, ROS-inducible treatments, and during pollen tube development and immune response, independently or in association with one another. Although there are more reports on the mechanism of chloroplast movement than that of peroxisomes and mitochondria, our knowledge of how and why these three energy organelles move and distribute in the plant cell is still scarce at the functional and mechanistic level. It is critical to identify factors that control organelle motility coupled with plant growth, development, and stress response.

Behavior of filamentous temperature-sensitive Z2 (FtsZ2) in the male gametophyte during sexual reproduction processes of flowering plants

Filamentous temperature-sensitive Z (FtsZ) is a critical division protein in bacteria that functions in forming a Z-ring structure to constrict the cell. Since the establishment of the plastid by endosymbiosis of a cyanobacterium into a eukaryotic cell, division via Z-ring formation has been conserved in the plastids of flowering plants. The FtsZ gene was transferred from the cyanobacterial ancestor of plastids to the eukaryotic nuclear genome during evolution, and flowering plants evolved two FtsZ homologs, FtsZ1 and FtsZ2, which are involved in chloroplast division through distinct molecular functions. Regarding the behaviors of FtsZ in nonphotosynthetic cells, the plastid localization of FtsZ1 proteins in the cytoplasm of microspores and pollen vegetative cells but not in generative cells or sperm cells has been reported. On the other hand, the significant accumulation of FtsZ2 transcripts in generative cells has been reported. However, the synthesis of FtsZ2 in the male gamete has not been investigated. Additionally, FtsZ2 behavior has not been analyzed in pollen, a nonphotosynthetic male tissue. Here, we report FtsZ2 protein behaviors in the male gamete by analyzing the localization patterns of GFP-fused protein at various pollen developmental stages and in gametes during the fertilization process. Our results showed that FtsZ2 localization coincided with that of plastids. FtsZ2 protein in male gametes was almost absent, despite the presence of the transcripts. Moreover, transmission of paternal FtsZ2 transcripts to the zygote and endosperm was not observed.

Isolation and analysis of a stromule-overproducing Arabidopsis mutant suggest the role of PARC6 in plastid morphology maintenance in the leaf epidermis

Stromules, or stroma-filled tubules, are thin extensions of the plastid envelope membrane that are most frequently observed in undifferentiated or non-mesophyll cells. The formation of stromules is developmentally regulated and responsive to biotic and abiotic stress; however, the physiological roles and molecular mechanisms of the stromule formation remain enigmatic. Accordingly, we attempted to obtain Arabidopsis thaliana mutants with aberrant stromule biogenesis in the leaf epidermis. Here, we characterize one of the obtained mutants. Plastids in the leaf epidermis of this mutant were giant and pleomorphic, typically having one or more constrictions that indicated arrested plastid division, and usually possessed one or more extremely long stromules, which indicated the deregulation of stromule formation. Genetic mapping, whole-genome resequencing-aided exome analysis, and gene complementation identified PARC6/CDP1/ARC6H, which encodes a vascular plant-specific, chloroplast division site-positioning factor, as the causal gene for the stromule phenotype. Yeast two-hybrid assay and double mutant analysis also identified a possible interaction between PARC6 and MinD1, another known chloroplast division site-positioning factor, during the morphogenesis of leaf epidermal plastids. To the best of our knowledge, PARC6 is the only known A. thaliana chloroplast division factor whose mutations more extensively affect the morphology of plastids in non-mesophyll tissue than in mesophyll tissue. Therefore, the present study demonstrates that PARC6 plays a pivotal role in the morphology maintenance and stromule regulation of non-mesophyll plastids.

Heat stress induces spikelet sterility in rice at anthesis through inhibition of pollen tube elongation interfering with auxin homeostasis in pollinated pistils

BACKGROUND

Pollen tube elongation in the pistil is a key step for pollination success in plants, and auxins play an important role in this process. However, the function of auxins in pollen tube elongation in the pistil of rice under heat stress has seldom been previously reported.

RESULTS

Two rice genotypes differing in heat tolerance were subjected to heat stress of 40 °C for 2 h after flowering. A sharp decrease in spikelet fertility was found in the Nipponbare (NPB) and its mutant High temperature susceptible (HTS) under heat stress, but the stress-induced spikelet sterility was reversed by 1-naphthaleneacetic acid (NAA), especially the HTS. Under heat stress, the pollen tubes of NPB were visible in ovule, while those of HTS were invisible. However, we found the pollen tubes in ovule when sprayed with NAA. During this process, a significant increase in indole-3-acetic acid (IAA) and reactive oxygen species (ROS) levels was found in the pistil of heat-stressed NPB, while in heat-stressed HTS they were obviously decreased. Additionally, the peroxidase (POD) activity in pistil of NPB was significantly decreased by heat stress, whereas there was no difference between the heat-stressed and non-heat-stressed pistils of HTS.

CONCLUSION

It was concluded that the enhancement of heat tolerance in plants by NAA was achieved through the increase of the levels of auxins, which prevented the inhibition of pollen tube elongation in pistil, and the crosstalk between auxins and ROS, which might be involved in this process. In addition, POD might be a negative mediator in pollen tube elongation under heat stress due to its ability to scavenge ROS and degrade auxin.

The Arabidopsis minD mutation causes aberrant FtsZ1 ring placement and moderate heterogeneity of chloroplasts in the leaf epidermis

Symmetric division of leaf mesophyll chloroplasts requires MinD and MinE, which work together to suppress division other than at the mid-chloroplast. arc11 is a MinD loss-of-function mutant of Arabidopsis thaliana. In arc11 plants, asymmetric chloroplast division, as well as its delay or arrest, results in extreme size polymorphism of chloroplasts in mature mesophyll cells. The current study examined chloroplast phenotypes in the epidermis of arc11 leaves. Fluorescence microscopy analysis revealed that epidermal chloroplasts in mature leaves exhibited moderate heterogeneity in size. This probably resulted from completion of many of the previous non-equatorial or multiple division events in expanding leaves. Additionally, analyses of plastids found that epidermal chloroplasts in arc11 mutants showed several phenotypes that have not previously been described.

Visualisation of plastid degradation in sperm cells of wheat pollen

Like most angiosperms, wheat (Triticum aestivum) shows maternal inheritance of plastids. It is thought that this takes place by cytoplasmic stripping at fertilisation rather than the absence of plastids in sperm cells. To determine the fate of plastids during sperm cell development, plastid-targeted green fluorescent protein was used to visualise these organelles in nuclear transgenic wheat lines. Fewer than thirty small 1-2-μm plastids were visible in early uninucleate pollen cells. These dramatically increased to several hundred larger (4 μm) plastids during pollen maturation and went through distinct morphological changes. Only small plastids were visible in generative cells (n = 25) and young sperm cells (n = 9). In mature sperm cells, these green fluorescent protein (GFP)-tagged plastids were absent. This is consistent with maternal inheritance of plastids resulting from their degradation in mature sperm cells in wheat.

Pollen DNA barcoding: current applications and future prospects

Identification of the species origin of pollen has many applications, including assessment of plant–pollinator networks, reconstruction of ancient plant communities, product authentication, allergen monitoring, and forensics. Such applications, however, have previously been limited by microscopy-based identification of pollen, which is slow, has low taxonomic resolution, and has few expert practitioners. One alternative is pollen DNA barcoding, which could overcome these issues. Recent studies demonstrate that both chloroplast and nuclear barcoding markers can be amplified from pollen. These recent validations of pollen metabarcoding indicate that now is the time for researchers in various fields to consider applying these methods to their research programs. In this paper, we review the nascent field of pollen DNA barcoding and discuss potential new applications of this technology, highlighting existing limitations and future research developments that will improve its utility in a wide range of applications.

The Arabidopsis minE mutation causes new plastid and FtsZ1 localization phenotypes in the leaf epidermis

Plastids in the leaf epidermal cells of plants are regarded as immature chloroplasts that, like mesophyll chloroplasts, undergo binary fission. While mesophyll chloroplasts have generally been used to study plastid division, recent studies have suggested the presence of tissue- or plastid type-dependent regulation of plastid division. Here, we report the detailed morphology of plastids and their stromules, and the intraplastidic localization of the chloroplast division-related protein AtFtsZ1-1, in the leaf epidermis of an Arabidopsis mutant that harbors a mutation in the chloroplast division site determinant gene AtMinE1. In atminE1, the size and shape of epidermal plastids varied widely, which contrasts with the plastid phenotype observed in atminE1 mesophyll cells. In particular, atminE1 epidermal plastids occasionally displayed grape-like morphology, a novel phenotype induced by a plastid division mutation. Observation of an atminE1 transgenic line harboring an AtMinE1 promoter::AtMinE1-yellow fluorescent protein fusion gene confirmed the expression and plastidic localization of AtMinE1 in the leaf epidermis. Further examination revealed that constriction of plastids and stromules mediated by the FtsZ1 ring contributed to the plastid pleomorphism in the atminE1 epidermis. These results illustrate that a single plastid division mutation can have dramatic consequences for epidermal plastid morphology, thereby implying that plastid division and morphogenesis are differentially regulated in epidermal and mesophyll plastids.

Pollen tube growth: where does the energy come from?

This review focuses on the energy metabolism during pollen maturation and tube growth and updates current knowledge. Pollen tube growth is essential for male reproductive success and extremely fast. Therefore, pollen development and tube growth are high energy-demanding processes. During the last years, various publications (including research papers and reviews) emphasize the importance of mitochondrial respiration and fermentation during male gametogenesis and pollen tube elongation. These pathways obviously contribute to satisfy the high energy demand, and there are many studies which suggest that respiration and fermentation are the only pathways to generate the needed energy. Here, we review data which show for the first time that in addition plastidial glycolysis and the balancing of the ATP/NAD(P)H ratio (by malate valves and NAD(+) biosynthesis) contribute to satisfy the energy demand during pollen development. Although the importance of energy generation by plastids was discounted during the last years (possibly due to the controversial opinion about their existence in pollen grains and pollen tubes), the available data underline their prime role during pollen maturation and tube growth.

Visualization of plastid movement in the pollen tube of Arabidopsis thaliana

Organelle dynamics in the plant male gametophyte has received attention for its importance in pollen tube growth and cytoplasmic inheritance. We recently revealed the dynamic behaviors of plastids in living Arabidopsis pollen grains and tubes, using an inherent promoter-driven FtsZ1-green fluorescent protein (GFP) fusion. Here, we further monitored the movement of pollen tube plastids with an actin1 promoter-driven, stroma-targeted yellow fluorescent protein (YFP). In elongating pollen tubes, most plastids localized to the tube shank, where they displayed either retarded and unsteady motion, or fast, directional, and long-distance movement along the tube polarity. Efficient plastid tracking further revealed a population of tip-forwarding plastids that undergo a fluctuating motion(s) before traveling backwards. The behavior of YFP-labeled plastids in pollen basically resembled that of FtsZ1-GFP-labeled plastids, thus validating the use of FtsZ1-GFP for simultaneous visualization of the stroma and the plastid-dividing FtsZ ring.

Two mechanosensitive channel homologs influence division ring placement in Arabidopsis chloroplasts

Chloroplasts must divide repeatedly to maintain their population during plant growth and development. A number of proteins required for chloroplast division have been identified, and the functional relationships between them are beginning to be elucidated. In both chloroplasts and bacteria, the future site of division is specified by placement of the Filamentous temperature sensitive Z (FtsZ) ring, and the Min system serves to restrict FtsZ ring formation to mid-chloroplast or mid-cell. How the Min system is regulated in response to environmental and developmental factors is largely unstudied. Here, we investigated the role in chloroplast division played by two Arabidopsis thaliana homologs of the bacterial mechanosensitive (MS) channel MscS: MscS-Like 2 (MSL2) and MSL3. Immunofluorescence microscopy and live imaging approaches demonstrated that msl2 msl3 double mutants have enlarged chloroplasts containing multiple FtsZ rings. Genetic analyses indicate that MSL2, MSL3, and components of the Min system function in the same pathway to regulate chloroplast size and FtsZ ring formation. In addition, an Escherichia coli strain lacking MS channels also showed aberrant FtsZ ring assembly. These results establish MS channels as components of the chloroplast division machinery and suggest that their role is evolutionarily conserved.