Effect of hydrocarbon stapling on the properties of α-helical antimicrobial peptides isolated from the venom of hymenoptera

The amphipathic design in helical antimicrobial peptides

Amphipathicity is a critical characteristic of helical antimicrobial peptides (AMPs). The hydrophilic region, primarily composed of cationic residues, plays a pivotal role in the initial binding to negatively charged components on bacterial membranes through electrostatic interactions. Subsequently, the hydrophobic region interacts with hydrophobic components, inducing membrane perturbation, ultimately leading to cell death, or inhibiting intracellular function. Due to the extensive diversity of natural and synthetic AMPs with regard to the design of amphipathicity, it is complicated to study the structure-activity relationships. Therefore, this work aims to categorize the common amphipathic design and investigate their impact on the biological properties of AMPs. Besides, the connection between current structural modification approaches and amphipathic styles was also discussed.

Impact of chemical modifications on the antimicrobial and hemolytic activity of helical amphipathic peptide Lasioglossin LL-III

Insect venom is abundant in potential antimicrobial peptides (AMPs), which can serve as novel alternatives to conventional antibiotics. Among them, Lasioglossin III LL-III) is a promising candidate with a broad spectrum against many fungi strains and both types of bacteria, whereas almost non-toxic to red blood cells. Many chemical approaches have been recently applied to improve its pharmacological properties and provide useful information regarding structure-activity relationships. Hence, this review focused on highlighting the lesson learned from each modification and supporting the future design of potent, selective, and metabolically stable AMPs.

Structural dynamics influences the antibacterial activity of a cell-penetrating peptide (KFF)3K

Given the widespread demand for novel antibacterial agents, we modified a cell-penetrating peptide (KFF)3K to transform it into an antibacterial peptide. Namely, we inserted a hydrocarbon staple into the (KFF)3K sequence to induce and stabilize its membrane-active secondary structure. The staples were introduced at two positions, (KFF)3K[5-9] and (KFF)3K[2-6], to retain the initial amphipathic character of the unstapled peptide. The stapled analogues are protease resistant contrary to (KFF)3K; 90% of the stapled (KFF)3K[5-9] peptide remained undigested after incubation in chymotrypsin solution. The stapled peptides showed antibacterial activity (with minimal inhibitory concentrations in the range of 2-16 µM) against various Gram-positive and Gram-negative strains, contrary to unmodified (KFF)3K, which had no antibacterial effect against any strain at concentrations up to 32 µM. Also, both stapled peptides adopted an α-helical structure in the buffer and micellar environment, contrary to a mostly undefined structure of the unstapled (KFF)3K in the buffer. We found that the antibacterial activity of (KFF)3K analogues is related to their disruptive effect on cell membranes and we showed that by stapling this cell-penetrating peptide, we can induce its antibacterial character.

Structure-Activity Relationship Study of Helix-Stabilized Antimicrobial Peptides Containing Nonproteinogenic Amino Acids

Helical amphipathic peptides containing cationic and hydrophobic amino acid residues can possess potent antimicrobial activity against both Gram-positive and Gram-negative bacteria. In this study, several amphipathic peptides with enhanced helical structures containing nonproteinogenic amino acids were designed, and the relationships between the antimicrobial activity, hemolytic activity, and cytotoxicity were evaluated. In particular, the effect on the antimicrobial activity and cytotoxicity of the number and position of stapling structures introduced into the sequence was investigated. Peptide stp1 containing α,α-disubstituted amino acids showed potent antimicrobial activity against multidrug-resistant bacteria (MDRP, SP45, and Staphylococcus aureus) without causing appreciable hemolytic activity or cytotoxicity. The cytotoxicity was found to be somewhat correlated to the hydrophobicity of the peptides.

Conjugates of Aminoglycosides with Stapled Peptides as a Way to Target Antibiotic-Resistant Bacteria

The misuse and overuse of antibiotics led to the development of bacterial resistance to existing aminoglycoside (AMG) antibiotics and limited their use. Consequently, there is a growing need to develop effective antimicrobials against multidrug-resistant bacteria. To target resistant strains, we propose to combine 2-deoxystreptamine AMGs, neomycin (NEO) and amikacin (AMK), with a membrane-active antimicrobial peptide anoplin and its hydrocarbon stapled derivative. The AMG-peptide hybrids were conjugated using the click chemistry reaction in solution to obtain a non-cleavable triazole linker and by disulfide bridge formation on the resin to obtain a linker cleavable in the bacterial cytoplasm. Homo-dimers connected via disulfide bridges between the N-terminus thiol analogues of anoplin and hydrocarbon stapled anoplin were also synthesized. These hybrid compounds show a notable increase in antibacterial and bactericidal activity, as compared to the unconjugated ones or their combinations, against Gram-positive and Gram-negative bacteria, especially for the strains resistant to AMK or NEO. The conjugates and disulfide peptide dimers exhibit low hemolytic activity on sheep red blood erythrocytes.

Rational design of stapled antimicrobial peptides

The global increase in antimicrobial drug resistance has dramatically reduced the effectiveness of traditional antibiotics. Structurally diverse antibiotics are urgently needed to combat multiple-resistant bacterial infections. As part of innate immunity, antimicrobial peptides have been recognized as the most promising candidates because they comprise diverse sequences and mechanisms of action and have a relatively low induction rate of resistance. However, because of their low chemical stability, susceptibility to proteases, and high hemolytic effect, their usage is subject to many restrictions. Chemical modifications such as D-amino acid substitution, cyclization, and unnatural amino acid modification have been used to improve the stability of antimicrobial peptides for decades. Among them, a side-chain covalent bridge modification, the so-called stapled peptide, has attracted much attention. The stapled side-chain bridge stabilizes the secondary structure, induces protease resistance, and increases cell penetration and biological activity. Recent progress in computer-aided drug design and artificial intelligence methods has also been used in the design of stapled antimicrobial peptides and has led to the successful discovery of many prospective peptides. This article reviews the possible structure-activity relationships of stapled antimicrobial peptides, the physicochemical properties that influence their activity (such as net charge, hydrophobicity, helicity, and dipole moment), and computer-aided methods of stapled peptide design. Antimicrobial peptides under clinical trial: Pexiganan (NCT01594762, 2012-05-07). Omiganan (NCT02576847, 2015-10-13).

Strategies employed in the design of antimicrobial peptides with enhanced proteolytic stability

Due to the alarming developing rate of multidrug-resistant bacterial pathogens, the development and modification of antimicrobial peptides (AMPs) are unprecedentedly active. Despite the fact that considerable efforts have been expended on the discovery and design strategies of AMPs, the clinical translation of peptide antibiotics remains inadequate. A large number of articles and reviews credited the limited success of AMPs to their poor stability in the biological environment, particularly their poor proteolytic stability. In the past forty years, various design strategies have been used to improve the proteolytic stability of AMPs, such as sequence modification, cyclization, peptidomimetics, and nanotechnology. Herein, we focus our discussion on the progress made in improving the proteolytic stability of AMPs and the principle, successes, and limitations of various anti-proteolytic design strategies. It is of prospective significance to extend current insights into the degradation-related inactivation of AMPs and also alleviate/overcome the problem.

Application of the All-Hydrocarbon Stapling Technique in the Design of Membrane-Active Peptides

The threats of drug resistance and new emerging pathogens have led to an urgent need to develop alternative treatment therapies. Recently, considerable research efforts have focused on membrane-active peptides (MAPs), a category of peptides in drug discovery with antimicrobial, anticancer, and cell penetration activities that have demonstrated their potential to be multifunctional agents. Nonetheless, natural MAPs have encountered various disadvantages, which mainly include poor bioavailability, the lack of a secondary structure in short peptides, and high production costs for long peptide sequences. Hence, an "all-hydrocarbon stapling system" has been applied to these peptides and proven to effectively stabilize the helical conformations, improving proteolytic resistance and increasing both the potency and the cell permeability. In this review, we summarized and categorized the advances made using this powerful technique in the development of stapled MAPs. Furthermore, outstanding issues and suggestions for future design within each subcategory were thoroughly discussed.

Unprotected peptide macrocyclization and stapling via a fluorine-thiol displacement reaction

We report the discovery of a facile peptide macrocyclization and stapling strategy based on a fluorine thiol displacement reaction (FTDR), which renders a class of peptide analogues with enhanced stability, affinity, cellular uptake, and inhibition of cancer cells. This approach enabled selective modification of the orthogonal fluoroacetamide side chains in unprotected peptides in the presence of intrinsic cysteines. The identified benzenedimethanethiol linker greatly promoted the alpha helicity of a variety of peptide substrates, as corroborated by molecular dynamics simulations. The cellular uptake of benzenedimethanethiol stapled peptides appeared to be universally enhanced compared to the classic ring-closing metathesis (RCM) stapled peptides. Pilot mechanism studies suggested that the uptake of FTDR-stapled peptides may involve multiple endocytosis pathways in a distinct pattern in comparison to peptides stapled by RCM. Consistent with the improved cell permeability, the FTDR-stapled lead Axin and p53 peptide analogues demonstrated enhanced inhibition of cancer cells over the RCM-stapled analogues and the unstapled peptides.

Strategies capable of stapling unprotected peptides in a straightforward, chemoselective, and clean manner, as well as promoting cellular uptake are of great interest. Here the authors report a peptide macrocyclization and stapling strategy which satisfies those criteria, based on a fluorine thiol displacement reaction.

Lysine Stapling Screening Provides Stable and Low Toxic Cationic Antimicrobial Peptides Combating Multidrug-Resistant Bacteria In Vitro and In Vivo

Cationic antimicrobial peptides (CAMPs) are promising for treatment of multidrug-resistant (MDR) bacteria-caused infections. However, clinical application of CAMPs has been hampered mostly due to their poor proteolytic stability and hemolytic toxicity. Recently, lysine-stapled CAMPs developed by us had been proved to increase peptide stability in vitro without induction of hemolysis. Herein, the applicability of the lysine stapling strategy was further explored by using five natural or artificial CAMPs as model peptides. Lysine stapling screening was implemented to provide 13 cyclic analogues in total. Biological screening of these cyclic analogues showed that CAMPs with a better amphiphilic structure were inclined to exhibit improved antimicrobial activity, protease stability, and biocompatibility after lysine-stapling. One of the stapled analogues of BF15-a1 was found to have extended half-life in plasma, enhanced antimicrobial activity against clinically isolated MDR ESKAPE pathogens, and remained highly effective in combating MRSA infection in a mouse model.

Current synthetic chemistry towards cyclic antimicrobial peptides

Antimicrobial peptides (AMPs) have great potentials for developing novel antibiotics against multi-drug resistant (MDR) bacteria. However, the clinical application of AMPs is limited due to their poor protease stability and high hemolytic toxicity. Various strategies have been widely explored to improve the pharmacological properties of natural or artificial antimicrobial peptides, including D- or non-natural amino acid residue replacement, backbone modification, cyclization, PEGlytion, and lipidation. Among others, peptide cyclization, which has been widely applied to enhance the biostability and target selectivity of bioactive peptide, is a very appealing and promising strategy for developing novel antibiotics based on AMPs. Herein, we summarize the current strategies for synthesizing cyclic antimicrobial peptides and the resulting influence of peptide cyclization on the biological activities.

Stapled Anoplin as an Antibacterial Agent

Anoplin is a linear 10-amino acid amphipathic peptide (Gly-Leu-Leu-Lys-Arg-Ile-Lys-Thr-Leu-Leu-NH2 ) derived from the venom sac of the solitary wasp. It has broad antimicrobial activity, including an antibacterial one. However, the inhibition of bacterial growth requires several dozen micromolar concentrations of this peptide. Anoplin is positively charged and directly interacts with anionic biological membranes forming an α-helix that disrupts the lipid bilayer. To improve the bactericidal properties of anoplin by stabilizing its helical structure, we designed and synthesized its analogs with hydrocarbon staples. The staple was introduced at two locations resulting in different charges and amphipathicity of the analogs. Circular dichroism studies showed that all modified anoplins adopted an α-helical conformation, both in the buffer and in the presence of membrane mimics. As the helicity of the stapled anoplins increased, their stability in trypsin solution improved. Using the propidium iodide uptake assay in Escherichia coli and Staphylococcus aureus, we confirmed the bacterial membrane disruption by the stapled anoplins. Next, we tested the antimicrobial activity of peptides on a range of Gram-negative and Gram-positive bacteria. Finally, we evaluated peptide hemolytic activity on sheep erythrocytes and cytotoxicity on human embryonic kidney 293 cells. All analogs showed higher antimicrobial activity than unmodified anoplin. Depending on the position of the staple, the peptides were more effective either against Gram-negative or Gram-positive bacteria. Anoplin[5-9], with a lower positive charge and increased hydrophobicity, had higher activity against Gram-positive bacteria but also showed hemolytic and destructive effects on eukaryotic cells. Contrary, anoplin[2-6] with a similar charge and amphipathicity as natural anoplin effectively killed Gram-negative bacteria, also pathogenic drug-resistant strains, without being hemolytic and toxic to eukaryotic cells. Our results showed that anoplin charge, amphipathicity, and location of hydrophobic residues affect the peptide destructive activity on the cell wall, and thus, its antibacterial activity. This means that by manipulating the charge and position of the staple in the sequence, one can manipulate the antimicrobial activity.

Rational Design of a Dual-Targeting Natural Toxin-Like Bicyclic Peptide for Selective Bioenergetic Blockage in Cancer Cells

Stapled α-helical peptides emerge as one of the attractive peptidomimetics which can efficiently penetrate the cell membrane to access intracellular targets. However, the incorporation of a highly lipophilic cross-link may lead to nonspecific membrane toxicity in certain cases. Here, we report a new class of thioether-tethered bicyclic α-helical peptide to mimic the highly constrained loop-helix structure of natural toxins with the dual-targeting ability for both cell-surface receptors and intracellular targets. The thioether cross-links are introduced to replace the redox-sensitive disulfide bonds in natural toxins via a photoinduced thiol-yne reaction followed by macrolactamization. As a proof of concept, αVβ3 integrin targeting ligand was grafted into one of the macrocycles in the bicyclic scaffold, while a mitochondria-targeting proapoptotic motif was introduced into the other macrocycle stabilized by an i, i + 7 alkyl thioether cross-link to recapitulate its α-helical conformation. The obtained dual-targeting bicyclic α-helical BIRK peptides showed highly stable α-helical conformation in the presence of denaturants or under high temperature. Notably, BIRK peptides could induce selective cell death in αVβ3 integrin-positive B16F10 cells by interfering with the bioenergetic functions of mitochondria. This work provides a new avenue to design and stabilize α-helical peptides in a highly constrained bicyclic loop-helix scaffold with dual functionality.

The multifaceted nature of antimicrobial peptides: current synthetic chemistry approaches and future directions

Bacterial infections caused by 'superbugs' are increasing globally, and conventional antibiotics are becoming less effective against these bacteria, such that we risk entering a post-antibiotic era. In recent years, antimicrobial peptides (AMPs) have gained significant attention for their clinical potential as a new class of antibiotics to combat antimicrobial resistance. In this review, we discuss several facets of AMPs including their diversity, physicochemical properties, mechanisms of action, and effects of environmental factors on these features. This review outlines various chemical synthetic strategies that have been applied to develop novel AMPs, including chemical modifications of existing peptides, semi-synthesis, and computer-aided design. We will also highlight novel AMP structures, including hybrids, antimicrobial dendrimers and polypeptides, peptidomimetics, and AMP-drug conjugates and consider recent developments in their chemical synthesis.

Chemical approaches in the development of natural nontoxic peptide Polybia-MP1 as a potential dual antimicrobial and antitumor agent

Polybia-MP1 is a well-known natural antimicrobial peptide that has been intensively studied recently due to its therapeutic potential. MP1 exhibited not only potent antibacterial activity but also antifungal and anticancer properties. More importantly, MP1 shows relatively low hemolytic activity compared to other antimicrobial peptides having a similar origin. Thus, besides investigating possible mechanisms of action, great efforts have been invested to develop this peptide to become more "druggable". In this review, we summarized all the chemical approaches, both success and failure, that using MP1 as a lead compound to create modified analogs with better pharmacological properties. As there have been thousands of natural AMPs found and deposited in numerous databases, such useful information in both the success and failure will provide insight into the research and development of antimicrobial peptides and guiding for the next steps.

Helical Antimicrobial Peptide Foldamers Containing Non-proteinogenic Amino Acids

Antimicrobial peptides (AMPs) are potential novel therapeutic drugs against microbial infections. Most AMPs function by disrupting microbial membranes because of their amphipathic properties and ordered secondary structures. In this minireview, we describe recent efforts to develop helical AMP foldamers containing non-proteinogenic amino acids, such as α,α-disubstituted α-amino acids, β-amino acids, γ-amino acids, side-chain stapling and N-alkyl glycines.

Design, Synthesis, and Antitumor Activities Study of Stapled A4K14-Citropin 1.1 Peptides

A4K14-citropin 1.1 is a structurally optimized derivative derived from amphibians' skin secreta peptide Citropin, which exhibits broad biological activities. However, the application of A4K14-citropin 1.1 as a cancer therapeutic is restricted by its structural flexibility. In this study, a series of all-hydrocarbon stapled peptides derivatives of A4K14-citropin 1.1 were designed and synthesized, and their chemical and biological characteristics were also investigated. Among them, A4K14-citropin 1.1-Sp1 and A4K14-citropin 1.1-Sp4 displayed improved helicity levels, greater protease stability, and increased antitumor activity compared with the original peptide, which establishes them as promising lead compounds for novel cancer therapeutics development. These results revealed the important influence of all-hydrocarbon stapling side chain on the secondary structure, hydrolase stability, and biological activity of A4K14-citropin 1.1.

Novel Stapling by Lysine Tethering Provides Stable and Low Hemolytic Cationic Antimicrobial Peptides

Cationic antimicrobial peptides (CAMPs) are potent therapeutics for drug-resistant bacterial infections. However, the clinical application of CAMPs is hampered by its poor proteolytic stability and hemolytic activity toward eukaryotic cells. Great efforts have been made to design and generate derivatives of CAMPs with improved pharmacological properties. Here, we report a novel stapling protocol, which tethers two ε-amino groups of the lysine residue by the N-alkylation reaction on the hydrophilic face of amphiphilic antimicrobial peptides. A series of lysine-tethered stapled CAMPs were synthesized, employing the antimicrobial peptide OH-CM6 as a model. Biological screening of the stapled CAMPs provided an analogue with strong antimicrobial activity, high proteolytic stability, and low hemolytic activity. This novel stapling approach offers an important chemical tool for developing CAMP-based antibiotics.

Peptide/Peptoid Hybrid Oligomers: The Influence of Hydrophobicity and Relative Side-Chain Length on Antibacterial Activity and Cell Selectivity

Previous optimisation studies of peptide/peptoid hybrids typically comprise comparison of structurally related analogues displaying different oligomer length and diverse side chains. The present work concerns a systematically constructed series of 16 closely related 12-mer oligomers with an alternating cationic/hydrophobic design, representing a wide range of hydrophobicity and differences in relative side-chain lengths. The aim was to explore and rationalise the structure-activity relationships within a subclass of oligomers displaying variation of three structural features: (i) cationic side-chain length, (ii) hydrophobic side-chain length, and (iii) type of residue that is of a flexible peptoid nature. Increased side-chain length of cationic residues led to reduced hydrophobicity till the side chains became more extended than the aromatic/hydrophobic side chains, at which point hydrophobicity increased slightly. Evaluation of antibacterial activity revealed that analogues with lowest hydrophobicity exhibited reduced activity against E. coli, while oligomers with the shortest cationic side chains were most potent against P. aeruginosa. Thus, membrane-disruptive interaction with P. aeruginosa appears to be promoted by a hydrophobic surface of the oligomers (comprised of the aromatic groups shielding the cationic side chains). Peptidomimetics with short cationic side chains exhibit increased hemolytic properties as well as give rise to decreased HepG2 (hepatoblastoma G2 cell line) cell viability. An optimal hydrophobicity window could be defined by a threshold of minimal hydrophobicity conferring activity toward E. coli and a threshold for maximal hydrophobicity, beyond which cell selectivity was lost.

Design of stapled antimicrobial peptides that are stable, nontoxic and kill antibiotic-resistant bacteria in mice

The clinical translation of cationic α-helical antimicrobial peptides (AMPs) has been hindered by structural instability, proteolytic degradation and in vivo toxicity from nonspecific membrane lysis. Although analyses of hydrophobic content and charge distribution have informed the design of synthetic AMPs with increased potency and reduced in vitro hemolysis, nonspecific membrane toxicity in vivo continues to impede AMP drug development. Here, we analyzed a 58-member library of stapled AMPs (StAMPs) based on magainin II and applied the insights from structure-function-toxicity measurements to devise an algorithm for the design of stable, protease-resistant, potent and nontoxic StAMP prototypes. We show that a lead double-stapled StAMP named Mag(i+4)1,15(A9K,B21A,N22K,S23K) can kill multidrug-resistant Gram-negative pathogens, such as colistin-resistant Acinetobacter baumannii in a mouse peritonitis-sepsis model, without observed hemolysis or renal injury in murine toxicity studies. Inputting the amino acid sequences alone, we further generated membrane-selective StAMPs of pleurocidin, CAP18 and esculentin, highlighting the generalizability of our design platform.

Intranasal administration of a stapled relaxin-3 mimetic has anxiolytic- and antidepressant-like activity in rats

Background and Purpose

Depression and anxiety are common causes of disability, and innovative tools and potential pharmacological targets are actively sought for prevention and treatment. Therapeutic strategies targeting the relaxin‐3 peptide or its primary endogenous receptor, RXFP3, for the treatment of major depression and anxiety disorders have been limited by a lack of compounds with drug‐like properties. We proposed that a hydrocarbon‐stapled mimetic of relaxin‐3, when administered intranasally, might be uniquely applicable to the treatment of these disorders.

Experimental Approach

We designed a series of hydrocarbon‐stapled relaxin‐3 mimetics and identified the most potent compound using in vitro receptor binding and activation assays. Further, we assessed the effect of intranasal delivery of relaxin‐3 and the lead stapled mimetic in rat models of anxiety and depression.

Key Results

We developed an i,i+7 stapled relaxin‐3 mimetic that manifested a stabilized α‐helical structure, proteolytic resistance, and confirmed agonist activity in receptor binding and activation in vitro assays. The stapled peptide agonist enhanced food intake after intracerebral infusion in rats, confirming in vivo activity. We showed that intranasal delivery of the lead i,i+7 stapled peptide or relaxin‐3 had orexigenic effects in rats, indicating a potential clinically translatable route of delivery. Further, intranasal administration of the lead i,i+7 stapled peptide exerted anxiolytic and antidepressant‐like activity in anxiety‐ and depression‐related behaviour paradigms.

Conclusions and Implications

Our preclinical findings demonstrate that targeting the relaxin‐3/RXFP3 receptor system via intranasal delivery of an i,i+7 stapled relaxin‐3 mimetic may represent an effective treatment approach for depression, anxiety, and related neuropsychiatric disorders.

The role of olefin geometry in the activity of hydrocarbon stapled peptides targeting eukaryotic translation initiation factor 4E (eIF4E)

Hydrocarbon stapled (HCS) peptides are a class of cross-linked α-helix mimetics. The technology relies on the use of α,α'-disubstituted alkenyl amino acids, which fully contrain the helical region to typically yield peptides with enhanced structural ordering and biological activity. Recently, monosubstituted alkenyl amino acids were disclosed for peptide stapling; however, the impact that this tether has on HCS peptide structure and activity has not yet been fully explored. By applying this HCS to the disordered peptide eIF4E-binding protein 1 (4E-BP1), we discovered that this type of tethering has a dramatic effect on olefin geometry and activity of the resultant stapled peptides, where the putative trans isomer was found to exhibit enhanced in vitro and cellular inhibitory activity against eIF4E protein-protein interactions. We further demonstrated that the metathesis catalyst used for ring-closing metathesis can influence monosubstituted HCS peptide activity, presumably through alteration of the cis/trans olefin ratio. This study represents one of the first in-depth analyses of olefin isomers of a stapled peptide and highlights an additional feature for medicinal chemistry optimization of this class of peptide-based probes.

Stereoisomerism of stapled peptide inhibitors of the p53-Mdm2 interaction: an assessment of synthetic strategies and activity profiles

Staple composition can influence target binding and bioactivity of peptides. We present strategies to modulate E/Z ratios and access saturated analogues.

All-hydrocarbon, i, i+7 stapled peptide inhibitors of the p53-Mdm2 interaction have emerged as promising new leads for cancer therapy. Typical chemical synthesis via olefin metathesis results in the formation of both E- and Z-isomers, an observation that is rarely disclosed but may be of importance in targeting PPI. In this study, we evaluated the effect of staple geometry on the biological activity of five p53-reactivating peptides. We also present strategies for the modulation of the E/Z ratio and attainment of the hydrogenated adduct through repurposing of the metathesis catalyst.

Hydrocarbon Stapled Antimicrobial Peptides

Antimicrobial peptides are promising candidates for anti-infective pharmaceuticals. Unfortunately, because of their low proteolytic and chemical stability, their usage is generally narrowed down to topical formulations. Until now, numerous approaches to increase peptide stability have been proposed. One of them, peptide hydrocarbon stapling, a modification based on stabilizing peptide secondary structure with a side-chain covalent hydrocarbon bridge, have been successfully applied to many peptides. Moreover, constraining secondary structure of peptides have also been proven to increase their biological activity. This review article describes studies on hydrocarbon stapled antimicrobial peptides with respect to improved drug-like properties.

Molecular design and genetic optimization of antimicrobial peptides containing unnatural amino acids against antibiotic-resistant bacterial infections

Antimicrobial peptides (AMPs) have been the focus of intense research towards the finding of a viable alternative to current small-molecule antibiotics, owing to their commonly observed and naturally occurring resistance against pathogens. However, natural peptides have many problems such as low bioavailability and high allergenicity that largely limit the clinical applications of AMPs. In the present study, an integrative protocol that combined chemoinformatics modeling, molecular dynamics simulations, and in vitro susceptibility test was described to design AMPs containing unnatural amino acids (AMP-UAAs). To fulfill this, a large panel of synthetic AMPs with determined activity was collected and used to perform quantitative structure-activity relationship (QSAR) modeling. The obtained QSAR predictors were then employed to direct genetic algorithm (GA)-based optimization of AMP-UAA population, to which a number of commercially available, structurally diverse unnatural amino acids were introduced during the optimization process. Subsequently, several designed AMP-UAAs were confirmed to have high antibacterial potency against two antibiotic-resistant strains, i.e. multidrug-resistant Pseudomonas aeruginosa (MDRPA) and methicillin-resistant Staphylococcus aureus (MRSA), with minimum inhibitory concentration (MIC) < 10 μg/ml. Structural dynamics characterizations revealed that the most potent AMP-UAA peptide is an amphipathic helix that can spontaneously embed into an artificial lipid bilayer and exhibits a strong destructuring tendency associated with the embedding process. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 746-756, 2016.

Hairpin structure stability plays a role in the activity of two antimicrobial peptides

Many naturally occurring antimicrobial peptides (AMPs) are amphipathic with a β-hairpin conformation stabilized by cross-strand disulfides across the associated β-strands. Here, we show that the disulfides are not essential. Other structuring means such as better β-turns and noncovalent cross-strand interactions can, with proper design, replace the disulfides with no loss in antimicrobial activity. Our results also demonstrate that the hairpin turn region may play a role in membrane recognition for at least one member of this class, since a homodimeric turnless β-sheet analog showed no antimicrobial activity. We also examined the effects of N-terminal fatty acid adducts on AMPs. Surprisingly, the large hydrophobic carboxylic moieties examined completely eliminated the antimicrobial activity of previously active β-hairpin peptides.

Therapeutic design of peptide modulators of protein-protein interactions in membranes

Membrane proteins play the central roles in a variety of cellular processes, ranging from nutrient uptake and signalling, to cell-cell communication. Their biological functions are directly related to how they fold and assemble; defects often lead to disease. Protein-protein interactions (PPIs) within the membrane are therefore of great interest as therapeutic targets. Here we review the progress in the application of membrane-insertable peptides for the disruption or stabilization of membrane-based PPIs. We describe the design and preparation of transmembrane peptide mimics; and of several categories of peptidomimetics used for study, including d-enantiomers, non-natural amino acids, peptoids, and β-peptides. Further aspects of the review describe modifications to membrane-insertable peptides, including lipidation and cyclization via hydrocarbon stapling. These approaches provide a pathway toward the development of metabolically stable, non-toxic, and efficacious peptide modulators of membrane-based PPIs. This article is part of a Special Issue entitled: Lipid order/lipid defects and lipid-control of protein activity edited by Dirk Schneider.

Protease-Resistant and Cell-Permeable Double-Stapled Peptides Targeting the Rab8a GTPase

Small GTPases comprise a family of highly relevant targets in chemical biology and medicinal chemistry research and have been considered "undruggable" due to the persisting lack of effective synthetic modulators and suitable binding pockets. As molecular switches, small GTPases control a multitude of pivotal cellular functions, and their dysregulation is associated with many human diseases such as various forms of cancer. Rab-GTPases represent the largest subfamily of small GTPases and are master regulators of vesicular transport interacting with various proteins via flat and extensive protein-protein interactions (PPIs). The only reported synthetic inhibitor of a PPI involving an activated Rab GTPase is the hydrocarbon stapled peptide StRIP3. However, this macrocyclic peptide shows low proteolytic stability and cell permeability. Here, we report the design of a bioavailable StRIP3 analogue that harbors two hydrophobic cross-links and exhibits increased binding affinity, combined with robust cellular uptake and extremely high proteolytic stability. Localization experiments reveal that this double-stapled peptide and its target protein Rab8a accumulate in the same cellular compartments. The reported approach offers a strategy for the implementation of biostability into conformationally constrained peptides while supporting cellular uptake and target affinity, thereby conveying drug-like properties.

Stapling of unprotected helical peptides via photo-induced intramolecular thiol-yne hydrothiolation

Peptide stapling emerged as a versatile strategy to recapitulate the bioactive helical conformation of unstructured short peptides in water to improve their therapeutic properties in targeting intracellular "undruggable" targets. Here, we describe the development of photo-induced intramolecular thiol-yne macrocyclization for rapid access to short stapled peptides with enhanced biophysical properties. This new peptide stapling technique provides rapid access to conformationally constrained helices with satisfying functional group tolerance. Notably, the vinyl sulfide linkage shows distinct lipophilicity with reduced membrane toxicity compared to the corresponding all-hydrocarbon analogue. As a proof of principle, we constructed stabilized helices modulating intracellular estrogen receptor (ER)-coactivator interactions with a nanomolar binding affinity, enhanced serum stability, a diffuse cellular distribution and selective cytotoxicity towards ER-positive MCF-7 cells.

Stereoselective synthesis of macrocyclic peptides via a dual olefin metathesis and ethenolysis approach

Macrocyclic compounds occupy an important chemical space between small molecules and biologics and are prevalent in many natural products and pharmaceuticals. The growing interest in macrocycles has been fueled, in part, by the design of novel synthetic methods to these compounds. One appealing strategy is ring-closing metathesis (RCM) that seeks to construct macrocycles from acyclic diene precursors using defined transition-metal alkylidene catalysts. Despite its broad utility, RCM generally gives rise to a mixture of E- and Z-olefin isomers that can hinder efforts for the large-scale production and isolation of such complex molecules. To address this issue, we aimed to develop methods that can selectively enrich macrocycles in E- or Z-olefin isomers using an RCM/ethenolysis strategy. The utility of this methodology was demonstrated in the stereoselective formation of macrocyclic peptides, a class of compounds that have gained prominence as therapeutics in drug discovery. Herein, we report an assessment of various factors that promote catalyst-directed RCM and ethenolysis on a variety of peptide substrates by varying the olefin type, peptide sequence, and placement of the olefin in macrocycle formation. These methods allow for control over olefin geometry in peptides, facilitating their isolation and characterization. The studies outlined in this report seek to expand the scope of stereoselective olefin metathesis in general RCM.

Hydrocarbon stapled peptides as modulators of biological function

Peptide-based drug discovery has experienced a significant upturn within the past decade since the introduction of chemical modifications and unnatural amino acids has allowed for overcoming some of the drawbacks associated with peptide therapeutics. Strengthened by such features, modified peptides become capable of occupying a niche that emerges between the two major classes of today's therapeutics-small molecules (<500 Da) and biologics (>5000 Da). Stabilized α-helices have proven particularly successful at impairing disease-relevant PPIs previously considered "undruggable." Among those, hydrocarbon stapled α-helical peptides have emerged as a novel class of potential peptide therapeutics. This review provides a comprehensive overview of the development and applications of hydrocarbon stapled peptides discussing the benefits and limitations of this technique.

The Stapled AKAP Disruptor Peptide STAD-2 Displays Antimalarial Activity through a PKA-Independent Mechanism

Drug resistance poses a significant threat to ongoing malaria control efforts. Coupled with lack of a malaria vaccine, there is an urgent need for the development of new antimalarials with novel mechanisms of action and low susceptibility to parasite drug resistance. Protein Kinase A (PKA) has been implicated as a critical regulator of pathogenesis in malaria. Therefore, we sought to investigate the effects of disrupted PKA signaling as a possible strategy for inhibition of parasite replication. Host PKA activity is partly regulated by a class of proteins called A Kinase Anchoring Proteins (AKAPs), and interaction between HsPKA and AKAP can be inhibited by the stapled peptide Stapled AKAP Disruptor 2 (STAD-2). STAD-2 was tested for permeability to and activity against Plasmodium falciparum blood stage parasites in vitro. The compound was selectively permeable only to infected red blood cells (iRBC) and demonstrated rapid antiplasmodial activity, possibly via iRBC lysis (IC₅₀ ≈ 1 μM). STAD-2 localized within the parasite almost immediately post-treatment but showed no evidence of direct association with PKA, indicating that STAD-2 acts via a PKA-independent mechanism. Furosemide-insensitive parasite permeability pathways in the iRBC were largely responsible for uptake of STAD-2. Further, peptide import was highly specific to STAD-2 as evidenced by low permeability of control stapled peptides. Selective uptake and antiplasmodial activity of STAD-2 provides important groundwork for the development of stapled peptides as potential antimalarials. Such peptides may also offer an alternative strategy for studying protein-protein interactions critical to parasite development and pathogenesis.

Efflux by small multidrug resistance proteins is inhibited by membrane-interactive helix-stapled peptides

Bacterial cell membranes contain several protein pumps that resist the toxic effects of drugs by efficiently extruding them. One family of these pumps, the small multidrug resistance proteins (SMRs), consists of proteins of about 110 residues that need to oligomerize to form a structural pathway for substrate extrusion. As such, SMR oligomerization sites should constitute viable targets for efflux inhibition, by disrupting protein-protein interactions between helical segments. To explore this proposition, we are using Hsmr, an SMR from Halobacter salinarum that dimerizes to extrude toxicants. Our previous work established that (i) Hsmr dimerization is mediated by a helix-helix interface in Hsmr transmembrane (TM) helix 4 (residues (90)GLALIVAGV(98)); and (ii) a peptide comprised of the full TM4(85-105) sequence inhibits Hsmr-mediated ethidium bromide efflux from bacterial cells. Here we define the minimal linear sequence for inhibitor activity (determined as TM4(88-100), and then "staple" this sequence via Grubbs metathesis to produce peptides typified by acetyl-A-(Sar)3-(88)VVGLXLIZXGVVV(100)-KKK-NH2 (X = 2-(4'-pentenyl)alanine at positions 92 and 96; Z = Val, Gly, or Asn at position 95)). The Asn(95) peptide displayed specific efflux inhibition and resensitization of Hsmr-expressing cells to ethidium bromide; and was non-hemolytic to human red blood cells. Stapling essentially prevented peptide degradation in blood plasma and liver homogenates versus an unstapled counterpart. The overall results confirm that the stapled analog of TM4(88-100) retains the structural complementarity required to disrupt the Hsmr TM4-TM4 locus in Hsmr, and portend the general validity of stapled peptides as therapeutics for the disruption of functional protein-protein interactions in membranes.

Macrocyclic α-Helical Peptide Drug Discovery

Macrocyclic α-helical peptides have emerged as a promising new drug class and within the scope of hydrocarbon-stapled peptides such molecules have advanced into the clinic. The overarching concept of designing proteomimetics of an α-helical ‘ligand’ which binds its cognate ‘target’ relative to α-helical interfacing protein-protein interactions has been well-validated and expanded through numerous investigations for a plethora of therapeutic targets oftentimes referred to as “undruggable” with respect to other modalities (e.g., small-molecule or proteins). This chapter highlights the evolution of macrocyclic α-helical peptides in terms of target space, biophysical and computational chemistry, structural diversity and synthesis, drug design and chemical biology. It is noteworthy that hydrocarbon-stapled peptides have successfully risen to the summit of such drug discovery campaigns.

Z-Selective olefin metathesis on peptides: investigation of side-chain influence, preorganization, and guidelines in substrate selection

Olefin metathesis has emerged as a promising strategy for modulating the stability and activity of biologically relevant compounds; however, the ability to control olefin geometry in the product remains a challenge. Recent advances in the design of cyclometalated ruthenium catalysts has led to new strategies for achieving such control with high fidelity and Z selectivity, but the scope and limitations of these catalysts on substrates bearing multiple functionalities, including peptides, remained unexplored. Herein, we report an assessment of various factors that contribute to both productive and nonproductive Z-selective metathesis on peptides. The influence of sterics, side-chain identity, and preorganization through peptide secondary structure are explored by homodimerization, cross metathesis, and ring-closing metathesis. Our results indicate that the amino acid side chain and identity of the olefin profoundly influence the activity of cyclometalated ruthenium catalysts in Z-selective metathesis. The criteria set forth for achieving high conversion and Z selectivity are highlighted by cross metathesis and ring-closing metathesis on diverse peptide substrates. The principles outlined in this report are important not only for expanding the scope of Z-selective olefin metathesis to peptides but also for applying stereoselective olefin metathesis in general synthetic endeavors.